GAV (Gonzo AIR VAlVe) InstAllAtIon pRoceduRe

pRoceduRe ApplIes to AIR shocks (FloAt & dhX AIR)FoX kIt p/n: 803-00-265

The air valve assembly must be properly oriented so that the seals on the fastener seal properly. The banjo housing shoulder (see drawing above) must be facing the eyelet.

Torque the fastener to 50 in-lb. (5.65 N-m).

»

»

©2006 FoX FActoRY Inc. | p/n: 605-00-077, ReV. A

coRRect