7/30/2019 Good safety practices

1/39

GOOD SAFETY PRACTI CES

7/30/2019 Good safety practices

2/39

Hoarding constructed accordance with Commissioner ofBuilding Control requirements.

7/30/2019 Good safety practices

3/39

Piling Machine

Inspected by Approved person

Daily inspection by designatedperson

Warning sign provided

Footing in sound condition

7/30/2019 Good safety practices

4/39

Shoring constructed in accordance to P.E. design forexcavation of more than 1.5 metre with the use of

mechanical digger

7/30/2019 Good safety practices

5/39

Shoring constructed in accordance to P.E. design forexcavation of more than 4.0 metre.

7/30/2019 Good safety practices

6/39

Open side of excavation more than 3 metre depthguarded by adequate barricade

7/30/2019 Good safety practices

7/39

Valid LM certificate

Daily check by crane operator

Lifting Supervisor supervising lifting operationRigger and signalman appointed for lifting operation

7/30/2019 Good safety practices

8/39

M t i l/ h i t

7/30/2019 Good safety practices

9/39

Hoist operated by authorized person

Material/passenger hoist

7/30/2019 Good safety practices

10/39

Worksite to be kept clean and free from effluents, nuisancesand conditions that can be detrimental to the workers andPublic health

7/30/2019 Good safety practices

11/39

Materials neatly stacked in safe and orderly manner

7/30/2019 Good safety practices

12/39

Temporary material

platform constructedand installed in

accordance to PE

design.

7/30/2019 Good safety practices

13/39

Generator With Bund Wall

7/30/2019 Good safety practices

14/39

Generator fenced off against unauthorized use.

7/30/2019 Good safety practices

15/39

Main distribution boardand switch gear

Checked and tested

monthly by LEW

7/30/2019 Good safety practices

16/39

7/30/2019 Good safety practices

17/39

7/30/2019 Good safety practices

18/39

DIESEL STORAGE WITH SIGNAGES

7/30/2019 Good safety practices

19/39

DIESEL STORAGE WITH SIGNAGES

AND PROVISION OF BUND WALL.

7/30/2019 Good safety practices

20/39

Tower crane base barricaded with warningsign. Free of water and obstructions.

7/30/2019 Good safety practices

21/39

Crawler Craneaccess laid withsteel plate

7/30/2019 Good safety practices

22/39

Crane access properly constructed and weekly check carried out

7/30/2019 Good safety practices

23/39

Scaffold erected in accordance to P.E. design.Working platform at alternate lift.Overlay or screen netting envelope scaffold

7/30/2019 Good safety practices

24/39

Base plate secured to soleplate and on solid ground

Scaffold stair providedaccess to working platform

7/30/2019 Good safety practices

25/39

Working platform closely decked and continuous with toeboard and guardrails

7/30/2019 Good safety practices

26/39

Signboard showingmaximum loads

7/30/2019 Good safety practices

27/39

Oxy-acetylene cylinders kept

upright in wheeled trolley

Gas cylinder fitted with

regulating valve andflashback arrestor

7/30/2019 Good safety practices

28/39

A worker anchored to a safety belt and anindependent lifeline when working on agondola. Materials on gondola are evenlydistributed

7/30/2019 Good safety practices

29/39

Peripheral overhead shelter erected around the building

7/30/2019 Good safety practices

30/39

Overhead shelters erected at every point of entry/exit of buildings

7/30/2019 Good safety practices

31/39

Formwork checked before, during and after concreting by

formwork supervisor

7/30/2019 Good safety practices

32/39

Formwork shall be design by P.E. where the ceilingheight exceed 9.14 metres

P.E. shall be responsible for the supervision of theconstruction and stability of the structure.

7/30/2019 Good safety practices

33/39

All openings are closed barricaded or effectively protected

7/30/2019 Good safety practices

34/39

Lift opening effectively barricaded

Lifting operation

7/30/2019 Good safety practices

35/39

Lifting operation

7/30/2019 Good safety practices

36/39

Large bin at lower end of each chute

7/30/2019 Good safety practices

37/39

Storage of material 610 mmaway from edge of building

7/30/2019 Good safety practices

38/39

Adequate ventilationprovided at work area

Exhaust fan provided to

remove dust particlegenerate from grinding

7/30/2019 Good safety practices

39/39

Safety harness