gps geodetik s82 t

2
S82(S82T) GNSS receiver MODEL:S82(S82T) GNSS receiver Product Introduction: Adopt advanced embedded Trimble board 220 Channels for Multi-Constellation GNSS Support Dual-bluetooth technology Specification Receiver accuracy REAL TIME KINEMATIC SURVEYING horizontal accuracy: 10mm+1ppm RMS vertical accuracy: 20mm+1ppm RMS WAAS differential positioning accuracy typically <5m 3D RMS Static AND Fast static GNSS Surveying Static horizontal accuracy: ±3mm+1ppm RMS Static vertical accuracy: ±5mm+1ppm RMS Code differential GNSS positioning Code differential positioning accuracy: 0.45m(CEP) Single positioning accuracy: 1.5m(CEP) Physical specification Size Height: 96mm Diameter:186mm 60mm from the airproof rubber loop to the bottom Weight: 1.2kg with internal battery, internal radio standard UHF antenna. Temperature Operation temperature:-25Ԩ to 60Ԩ (-13 F to140 F ) Storage temperature:-55Ԩ to 85Ԩ (-67 F to 185 F) Humidity: 100% condensing Water / dustproof: protected from temporary immersion to depth of 1m Shock and vibration: tested and meets the following environmental standards: Shock: non-operating: Designed to survive a 2m pole Drop on to concrete. Operating: to 40G, 10 msec, sawtooth Electrical Power 9 to a 15V DC external power input with over-voltage Protection on port 1 (5-pin Lemo) Rechargeable, removable 7.4V, 2.3 Ah Lithium-lon battery in internal battery compartment. Power consumption is 3.8W, in RTK rover Mode with internal radio, operating times on internal battery: -450MHz receive only option: 4.8hours -GSM/GPRS: 4hours

Upload: regi-bungsu

Post on 06-Aug-2015

27 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: Gps geodetik s82 t

S82(S82T) GNSS receiver

MODEL:S82(S82T) GNSS receiver

Product Introduction: Adopt advanced embedded Trimble board 220 Channels for Multi-Constellation GNSS Support Dual-bluetooth technology

Specification

Receiver accuracy REAL TIME KINEMATIC SURVEYING horizontal accuracy: 10mm+1ppm RMS vertical accuracy: 20mm+1ppm RMS

WAAS differential positioning accuracy typically <5m 3D RMS Static AND Fast static GNSS Surveying

Static horizontal accuracy: ±3mm+1ppm RMS Static vertical accuracy: ±5mm+1ppm RMS

Code differential GNSS positioning Code differential positioning accuracy: 0.45m(CEP)

Single positioning accuracy: 1.5m(CEP)

Physical specification Size Height: 96mm Diameter:186mm 60mm from the airproof rubber loop to the bottom Weight: 1.2kg with internal battery, internal radio standard UHF antenna. Temperature Operation temperature:-25 to 60 (-13 F to140 F ) Storage temperature:-55 to 85 (-67 F to 185 F) Humidity: 100% condensing Water / dustproof: protected from temporary immersion to depth of 1m Shock and vibration: tested and meets the following environmental standards: Shock: non-operating: Designed to survive a 2m pole Drop on to concrete. Operating: to 40G, 10 msec, sawtooth

Electrical Power 9 to a 15V DC external power input with over-voltage Protection on port 1 (5-pin Lemo) Rechargeable, removable 7.4V, 2.3 Ah Lithium-lon battery in internal battery compartment. Power consumption is 3.8W, in RTK rover Mode with internal radio, operating times on internal battery: -450MHz receive only option: 4.8hours -GSM/GPRS: 4hours

Page 2: Gps geodetik s82 t

Communication and data storage 3-wire serial (5-pin Lemo) on port 1, 3-wire serial+1.1 USB on port 2(DB9) Full integrated, fully sealed internal 450MHz receiver Fully integrated, fully sealed internal GSM/GPRS option Fully integrated, fully sealed 2.4Ghz communications port(Bluetooth) External cellphone support for GSM/GPRS modems for RTK and VRS operations Data storage on 64MB internal memory: 45.7 days of raw observables (approx. 1.4MB per Day), based on recording every 15 seconds from an average of 14 satellites 1Hz,2Hz, 5Hz, 10Hz and 20Hz positioning CMR, RTCM2.3, RTCM3.0 input and output 0183 NMEA outputs

Radio Frequency 430-450MHz , 450-470MHz optional

Product Feature

Receiver part Advanced Trimble Maxwell 6 Custom Survey GNSS chip with 220 channels High precision multiple correlator for GNSS pseudorange measurements Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and high dynamic response Very low noise GNSS carrier phase measurements with <1mm Precision in a 1Hz bandwidth Signal-to-Noise ratios reported in db-Hz Proven low elevation tracking technology Initialization time <15s initialization reliability>99.9% Satellite signals tracked simultaneously GPS: L1 C/A, L2E, L2C, L5(reserved) GLONASS: L1 C/A, L1P, L2 C/A (GLONASS M only), L2P SBAS: L1 C/A, L5(reserved) Gallileo: (reserved) GIOVE-A: L1 BOC, E5A, E5B, E5AltBOC GIOVE-B: L1 CBOC, E5A. E5B, E5AltBOC Compass: (reserved) B1(QPSK), B1-MBOC(6,1,1/11) , B1-2 (QPSK), B2(QPSK), B2-BOC(10,5 ) , B3(QPSK), B3BOC(15,2.5), L5 (QPSK).