INSTALLATION & ASSEMBLY GUIDE

Congratulations on the purchase of your new Grafico Fabric Lightbox. This is the preferred packaging method.

Unpack base part and swivel feet out into position.

Match symbols for correct placement. Gently slide the first upright piece over the prongs on the base part.

Repeat step #3 on the opposite side.

Again match the symbols for correct placement and connect the small part to the uprights.

Repeat step #5 on the opposite side.

Connect the cross bar to the prongs provided. Method #1: Connect the rest of the frame by matching up the symbols piece by piece. Or:

Method #2: As above - Build top half of the frame first and then connect to the bottom part of the frame.

1.

3.

5.

7.

2.

4.

6.

8.

GRAFICO FABRIC LIGHTBOX

INSTALLATION & ASSEMBLY GUIDE

Starting at the top left corner, insert the corner of the fabric into the channel.

This is how the frame should look when built correctly. Work your way across and down, pushing the welt into the channel as you go.

Repeat Steps #10 and #11 starting from the top right corner to meet in the middle.

Once the top of the fabric is positioned, work your way down the left and right sides and lastly, the bottom.

This is how the fabric should look when built correctly.

9.

12. 14.

10.

11.

13.

GRAFICO FABRIC LIGHTBOX

INSTALLATION & ASSEMBLY GUIDE

Attach the power cable as shown to the frame to illuminate your lightbox.

Run the cord around the back of the frame. This is how it should look completed. Make sure to add the blockout fabric

or a secondary fabric to the other side of the frame to trap the light inside.

16.15.

GRAFICO FABRIC LIGHTBOX