graver catalog inside pages - christian berner · company profile graver technologies offers a...
TRANSCRIPT
Company Profile
Graver Technologies offers a broad selection of liquid process filters, high performance specialty ion exchange resinsand services, and proprietary adsorbents for the most demanding application environments. We also supply filtrationproducts to manufacturers of pumps, turbines, compressors, medical devices, and consumer and industrialvacuums. Because of the breadth of our technologies and the depth of our scientific and analytical resources, weare often called upon to solve our customers’ most challenging problems.
Graver Technologies serves industries that include:• Process Water• Power Generation• Food & Beverage• Drinking Water• Pharmaceutical• Chemical
Liquid Process Filter GroupThe products found in this catalog are offered by Graver’s Liquid Process Filter Group. Graver Technologies offers anextensive line of filter cartridges and housings to provide high performance and cost effective solutions for liquidprocess applications. With filters suitable for common industrial, high purity water and other critical process streams,Graver Technologies liquid process filters service a wide array of applications in the beverage, chemical,microelectronics, and biopharmaceutical markets. Our membrane filters are constructed in a state-of-the-artmanufacturing facility that includes an ISO Class 7 clean room to meet the most demanding customer requirements.Graver Technologies liquid process filters are also available in a wide range of media types, cartridge designs, micronratings, and configurations to optimize filtration efficiency while providing dependable performance and long servicelife.
Global PresenceExporting on average more than 35% of our products, Graver Technologies is recognized worldwide. Our global presence extends from North and South America, across Europe and into Asia– including the Pacific Rim, Japan,and Australia. We are headquartered in Glasgow, Delaware, with additional manufacturing and marketing facilities inNewark, New Jersey and Honeoye Falls, New York.
Our Parent CompanyGraver Technologies is a member of The Marmon Group (a Berkshire Hathaway company), an internationalcorporation with more than $7 billion in annual sales. Around the corner or around the world, Graver Technologies isa fast-growing company with the technical resources and financial strength that make us the perfect partner for yourbusiness
www.gravertech.com
www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Quality System
Graver Technologies is an ISO 9001 registered firm under BSI Management Systems.
Quality at Graver means:
• Every employee is responsible for quality
• Continuous improvements in products and processes
• Doing the job right the first time
• Continually monitoring key processes
• Preventing nonconformance
• Producing to established specifications
• Providing consistent and reliable products
• Monitoring and improving customer satisfaction levels
• On time delivery
• Working with capable vendors
• Understanding our customer’s needs
• Delighting our customers
At Graver our people and our products reflect our commitment to provide the best value to our customers, to createproducts that reflect the most advanced technology, and to adhere to manufacturing practices that deliver consistent,high performance products and service each and every time.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700
Filter End Configurations Gravers offers a wide variety of end configurations on our filter cartridges to meet customer requirements and for fit in installedhousings. The following guide will familiarize you with the options available.
* DOE = Double Open End / SOE = Single Open End Note: that not all configurations are available on every product. Please consult specific product data sheets for more detail.
StyleDOE
orSOE
StyleDOE
orSOE
P DOE DBG DOE
P3 SOE P6 SOE
P8 SOE P9 SOE
P2 SOE PX DOE
P7 SOE AM SOE
NN DOE NPC DOE
Plastic spring Extended coreon closed end on open end
Flat gasket or NN on both openends with extended core on one end
Internal o-rings on both open ends
( )
Internal o-ring Recessed cupon open end on closed end
Plastic spring Gasket or NNon closed end on open end
Santoprene gaskets bondedon both open ends
P8 - 222/FIN
222 double o-ring Spear onon open end closed end
226 double o-ring Flat onon open end closed end
NN - NONESTRATUM
No endcaps/no o-rings or gasketson both open ends
226 double o-ring Spear onon open end closed end
P3 - 222/FLAT
222 double o-ring Flat onon open end closed end
Thermally bonded-plastic caps withflat gasket seal on both open ends
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 1 |
Table of Contents
Membrane FiltersTefTEC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
WaterTEC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ZTEC™ B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
ZTEC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
ZTEC G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
ZTEC P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
ZTEC WB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Pleated FiltersGFC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
GFP™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
High Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
High Flow GF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
PMA™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
PMC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
QCR™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
QMA™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
QMC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
QXL™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Depth FiltersCOAX™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Crystal MBF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
MBC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Stratum™ A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Stratum C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
SpecialtyGSTACK Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
RTEC™ P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Steris® Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
HousingsGSTACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
High Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
IHP™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
LPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
MC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
SC™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
SHP™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Mem
brane Filters
Pleated
FiltersD
epth Filters
Sp
ecialtyH
ousing
s
Graver Product Media Hardware Retention Ratings (μm) Efficiency
TefTec PTFE Polypropylene 0.05, 0.1, 0.2, 0.45, 1.0 Absolute
WaterTec Polyethersulfone Polypropylene 0.05, 0.1, 0.2, 0.45, 0.65 Absolute
ZTEC B Polyethersulfone Polypropylene 0.2, 0.45, 0.65 Absolute
ZTEC E Polyethersulfone Polypropylene 0.03, 0.1, 0.2, 0.45 Absolute
ZTEC G Polyethersulfone Polypropylene 0.1, 0.2, 0.45, 0.65 Absolute
ZTEC P Polyethersulfone Polypropylene 0.2 Absolute
ZTEC WB Polyethersulfone Polypropylene 0.2, 0.45, 0.65, 1.2 Absolute
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 3 |
Membrane Filters
Mem
brane Filters
| 4 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Absolute Rated PTFE Membrane Filter CartridgesTefTEC cartridge filters are constructed with naturallyhydrophobic PTFE membrane and polypropylene supportlayers and components. The HIMA retentive PTFEmembrane offers superior hydrophobicity and waterintrusion resistance compared to PVDF and polypropylenemembranes, and the cartridge construction offers a cost-effective alternative to all-fluorocarbon filters. TefTEC filtersare ideal for gas/vent applications and the filtration ofaggressive chemicals and solvents.
Features–Benefits• High surface area, single-layer construction provides
superior flow rates and minimizes filtration system size• 100% Flushed with 18 M -cm DI water and integrity
tested• Filters are manufactured, flushed, tested and packaged
in an ISO Class 7 Cleanroom Environment.• Each filter element stamped with pore size, lot and
serial number for identification and traceability.• Complete qualification guide available
Product Specifications
Media: Expanded PTFE membrane
Inner core, end caps, cage: Polypropylene
Support layers: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-rings only).Teflon (gasket only)
Micron ratings: 0.05, 0.1, 0.2, 0.45, 1.0 μm
Dimensions
Typical Nominal 5", 9.75", 10", 20", 30", 40"lengths: (12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 8.5 ft 2. (0.79 m2) – 10" element
Operating ParametersMaximum operatingtemperature: 203°F (95°C)
Maximum 75 psid @ 70°F (5.2 bar @ 21°C)differential pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
15 psid @ 203°F (1.03 bar @ 95°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
TefTEC™ Series Filter Cartridges
Typical Applications• Aggressive chemicals
• Strong acids/bases
• Solvents
• Tank Vents
• Compressed gases
• Photoresists
• Hot DI water
• Pharmaceutical Intermediates
• Fermentation air
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.1550, as applicable for foodand beverage contact.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 5 |
Membrane Fi l ters
Mem
brane Filters
TefTEC Nomenclature Information
TefTEC 0.1 -20 P2 SEnd ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-RingNPC Double Open End, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)T Teflon (gasket only)
Retention Rating (microns)0.05 0.450.1 10.2
Nominal Length (inches)
-5-9.75-10-20-30-40
Filter TypeTefTEC Series Filters
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.05 μm
0.1 μm0.2 μm
0.45 μm1.0 μm
TefTEC FLOW RATE
0.90.80.70.60.50.40.30.20.1
0
.062
.048
.034
.021
.007
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 17 34 51 68 85 M3/HR
0 5 10 15 20 25 30 35 40 45 50 SCFM
Air Flow Rate (per 10''cartridge)
0.05, 0.1 μm
0.2 μm
0.45 μm
1.0 μm
TefTEC AIR FLOW RATE
Test conditions: System pressure at <10 psig (vent), 65˚F (18˚C),outlet open to atmosphere
Example: TefTEC 0.1-20P2S
Performance Specifications
Steam/Autoclave
Cartridges will withstand at least 100 steam/autoclave 30 minute cycles @ 275°F (135°C)
Integrity Test Values
Air Diffusion per 10 inch cartridge wet with 60/40IPA/water. Contact Graver Technologies for specificmethod.
Pore Size Specification
0.05 μm: ≤ 50 cc/min @ 22 psig (1.5 bar)0.1 μm: ≤ 50 cc/min @ 18 psig (1.2 bar)0.2 μm: ≤ 20 cc/min @ 12 psig (0.8 bar)0.45 μm: ≤ 15 cc/min @ 5 psig (0.34 bar)1.0 μm: ≤ 15 cc/min @ 3 psig (0.2 bar)
0.6
0.5
0.4
0.3
0.2
0.1
0
.042
.035
.028
.021
.014
.007
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 17 34 51 68 85 M3/HR
0 5 10 15 20 25 30 35 40 45 50 SCFM
Air Flow Rate (per 10''cartridge)
0.05, 0.1 μm
0.2 μm
0.45 μm
1.0 μm
TefTEC AIR FLOW RATE
Test conditions: System pressure at 30 psig, 65˚F (18˚C)
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
| 6 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Absolute Rated Polyethersulfone Membrane FilterCartridgesThe WaterTEC filter series is constructed of absoluterated, hydrophilic, asymmetric polyethersulfonemembrane and polypropylene components. The filter isdesigned for overall filtration economy and providesexcellent flow rates and throughputs.
Features–Benefits• Low pressure drop reduces energy costs• High dirt holding capacity minimizes change-outs and
down time• All thermal bonded construction with no adhesives• Available in all common configurations to allow use of
existing filter housings• Cost effective absolute filtration
Product Specifications Media: Asymmetric polyethersulfone
Inner core, end caps,cage: Polypropylene
Support layers: Spunbonded Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Rings only), Teflon (gasket only)
Micron ratings: 0.05, 0.1, 0.2, 0.45, 0.65 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.7, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0’ (2.54 cm)
Surface area: 6 ft 2.. (0.56 m2) per 10 inch element
Operating ParametersMaximum sustained operating temperature: 180°F (82°C) at 20 psid (1.38 bar)
Maximum 60 psid @ 80°F (4.14 bar @ 27°C)differential pressure: 30 psid @ 160°F (2.07 bar @ 71°C)
15 psid @ 200°F (1.03 bar @ 93.3°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
WaterTEC™Series Filter Cartridges
Typical Applications• General water filtration• DI water prefilter• DI water post filter• Aqueous based chemical
processing
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.2440 as applicable for foodand beverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 7 |
Membrane Fi l ters
Mem
brane Filters
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm
0.45 μm0.65 μm
0.05 μm 0.1 μm
WaterTEC FLOW RATE
WaterTEC Nomenclature Information
WaterTEC 0.2 -10 P2 E -R
End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal
O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)T Teflon (gasket only)
Retention Rating (microns)0.050.10.20.450.65
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeWaterTEC Series Filters
Example: WaterTEC 0.2-10P2E
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Pre-Rinse Option-R Factory Pre-Rinse
Performance Specifications
Cleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH rangefrom 1–14. Consult factory for specific compatibilityinformation.
| 8 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Pleated Polyethersulfone (PES) Membrane forBioburden Reduction in Beverages andBiopharmaceuticalsZTEC B Bioburden Reduction grade membrane cartridgesprovide highly consistent performance for bioburdenreduction and particle removal across a wide range ofbeverage, pharmaceutical and biological fluids. The naturallyhydrophilic PES membrane filters provide exceptional flowrates, long on-stream life, broad chemical compatibility andhave no added surfactants to contribute to extractables. Thecartridges are integrity testable and steamable to assurereliable service in critical applications.
Features–Benefits• Manufactured in an ISO Class 7 Cleanroom Environment • 100% flushed with ultrapure DI water and integrity tested• Repeatably Steamable/Sanitizable• High retentions up to 107/cm2 challenged for bacteria and
yeast• Pore size, lot and serial number are stamped on each
filter element for identification and traceability• Complete qualification guide available• Quick wet treatment available
Product Specifications Media: Asymmetric Polyethersulfone membrane
Inner core, end caps,cage: Polypropylene
Support layers: Spunbonded Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Rings only)
Micron ratings: 0.2, 0.45, 0.65 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.7, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 7.6 ft 2. (0.7 m2) per 10" element
Operating ParametersMaximum sustained operating temperature: 176°F (80°C) at 20 psid (1.38 bar)
Maximum 60 psid @ 80°F (4.14 bar @ 27°C)differential pressure: 30 psid @ 160°F (2.07 bar @ 71°C)
15 psid @ 200°F (1.03 bar @ 93.3°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
ZTEC™B Series Filter Cartridges
Typical Applications• Bottled Water• Ophthalmic Solutions • Culture Media• Reagent Chemicals• LVPs• Buffers• Juices
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.2440 as applicable for foodand beverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 9 |
Membrane Fi l ters
Mem
brane Filters
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm
0.45 μm0.65 μm
ZTEC B FLOW RATE
ZTEC B Nomenclature Information
ZTEC B 0.2 -20 P2 E -QW
End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal
O-Ring NPC Double open end, internal
O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)
Retention Rating (microns)0.20.450.65
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeZTEC B Series Filters
Example: ZTECB 0.2-20P2E
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Performance Specifications
Hot DI Water
Filter cartridge will withstand temperatures of 185°F (85°C)for up to 30 consecutive minutes.
Cleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibility information.
Steam/Autoclave
Cartridges may be steamed or autoclaved for at least50 thirty minute cycles @ 275°F (135°C).
Typical Bacterial Retention Performance
0.2 μm: LRV for B. diminuta ≥ 7.80.45 μm: LRV for S. marcescens ≥ 8.50.65 μm: LRV for S. cerevisiae ≥ 11
Integrity Test Specifications
Minimum Bubble Point values and maximum Diffusive AirFlow (per 10-inch cartridge) values for ZTEC-B filters wetwith water:Pore Size Bubble Point Diffusive Air Flow
0.2 μm: ≥ 38 psig (2.6 bar) ≤ 35 cc/min @ 30 psig (2.1 bar)0.45 μm: ≥ 25 psig (1.7 bar) ≤ 35 cc/min @ 20 psig (1.4 bar)0.65 μm: ≥ 18 psig (1.2 bar) ≤ 35 cc/min @ 15 psig (1.0 bar)
Quickwettreatment
| 10 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Pleated Polyethersulfone (PES) Membrane forFinal Filtration of Ultrapure WaterZTEC E microelectronics grade cartridges representGraver’s latest development in ultrapure water filtrationtechnology. The filters are inherently hydrophilic andcontain no added surfactants or wetting agents that couldcontaminate pure and ultrapure water streams. The PESmembrane offers superior flow characteristics, highcontaminant capacity and consistent removal of sub-micron particles. The cartridges exhibit rapid rinse-up to18 M -cm resistivity and single digit ppb levels of TOC.
Features–Benefits• Manufactured, flushed, tested and packaged, in an ISO
Class 7 Cleanroom Environment.• Filters are100% flushed with 18 M -cm DI water and
integrity tested.• Resistivity rinse-up to 18 M -cm and single digit ppb
TOC levels with minimal throughput.• Available in a variety of end cap/adapter configurations
to fit all industry-standard housings.• Pore size, lot and serial number are stamped on each
filter element for identification and traceability.• Complete qualification guide available.
Product Specifications Media: Asymmetric Polyethersulfone membrane
Inner core, end caps,cage:Polypropylene
Support layers: Spunbonded Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Ringsonly)
Micron ratings: 0.1, 0.2, 0.45, 0.65 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.7, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 7.0 ft 2. (0.65 m2) per 10" element
Operating ParametersMaximum sustained operating temperature: 176°F (80°C) at 20 psid (1.38 bar)
Maximum 60 psid @ 80°F (4.14 bar @ 27°C)differential pressure: 30 psid @ 160°F (2.07 bar @ 71°C)
15 psid @ 200°F (1.03 bar @ 93.3°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
ZTEC™E Series Filter Cartridges
Typical Applications• DI water• High purity chemicals
CertificationsZTEC E filters were tested by outside laboratory, CT Associates in November, 2011 for the following:
•TOC Rinse-up to 0.5 ppb•Resistivity Rinse-up to 18 MΩ-cm•Non-Volatile Residue•Particle Rinse-up•Trace Metal Extractables•Anion and Cation Extractables
Please request Graver ZTEC E Qualification Guide fordetails and complete test reports.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 11 |
Membrane Fi l ters
Mem
brane Filters
6
4.5
3
1.5
0
.42
.30
.21
.10
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.03 μm
0.1 μm0.2 μm
0.45 μm
ZTEC E FLOW RATE
ZTEC E Nomenclature Information
ZTEC E 0.45 -30 P8 TEnd ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal
O-Ring NPC Double open end, internal
O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton
(O-Rings only)
Retention Rating (microns)0.030.10.20.45
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeZTEC E Series Filters
Example: ZTECE 0.45-30P8T
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Performance Specifications
Hot DI Water
Filter cartridge will withstand temperatures of 185°F (85°C)for up to 30 consecutive minutes.
Cleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibility information.
Rinse-Up Volumes
• Resistivity rinse-up to 18 M -cm: <30 minutes at a flowof 3 gpm per 10-inch element.
• Rinse-up to single digit ppb TOC in <120 minutes at aflow of 3 gpm per 10-inch element.
Integrity Test Specifications
Minimum Bubble Point values and maximum Diffusive AirFlow (per 10-inch cartridge) values for ZTEC-E filters wetwith water:Pore Size Diffusive Air Flow
0.03 μm: ≤ 50 cc/min @ 50 psig (3.1 bar)0.1 μm: ≤ 50 cc/min @ 40 psig (2.8 bar)0.2 μm: ≤ 35 cc/min @ 30 psig (2.1 bar)0.45 μm: ≤ 35 cc/min @ 20 psig (1.4 bar)
| 12 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Absolute Rated Polyethersulfone MembranePleated Filter CartridgesThis pleated, disposable filter element is constructed ofabsolute rated, hydrophilic, asymmetric polyethersulfonemembrane with extended filter area to allow for a highsystem flow rate.
Features–Benefits• 7.0 ft2 (0.65 m2) of membrane surface area per 10"
element – High throughput – Longer on-line servicereduces costly maintenance time
• Absolute rated membrane from 0.1 to 0.65 μm• Manufactured in an ISO Class 7 cleanroom environment• 100% flushed with 18 M -cm DI water and gross
integrity tested• Fixed pore construction eliminates dirt unloading
as differential pressure increases• Low extractables
Product Specifications Media: Asymmetric Polyethersulfone membrane
Inner core, end caps,cage:Polypropylene
Support layers: Spunbonded Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Ringsonly)
Micron ratings: 0.1, 0.2, 0.45, 0.65 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.7, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 7.0 ft 2. (0.65 m2) per 10" element
Operating ParametersMaximum sustained operating temperature: 176°F (80°C) at 20 psid (1.38 bar)
Maximum 60 psid @ 80°F (4.14 bar @ 27°C)differential pressure: 30 psid @ 160°F (2.07 bar @ 71°C)
15 psid @ 200°F (1.03 bar @ 93.3°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
ZTEC™G Series Filter Cartridges
Typical Applications• Food & Beverage• Filtration of acids and bases • Cosmetics• Ink• Chemicals• Ultra pure water• Aqueous solutions
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.2440 as applicable for foodand beverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 13 |
Membrane Fi l ters
Mem
brane Filters
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm
0.45 μm0.65 μm
0.1 μm
ZTEC G FLOW RATE
ZTEC G Nomenclature Information
ZTEC G 0.1 -10 P7 TEnd ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal
O-Ring NPC Double open end, internal
O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton
(O-Rings only)
Retention Rating (microns)0.10.20.450.65
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeZTEC G Series Filters
Example: ZTECG 0.1-10P7S
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Performance Specifications
Hot DI Water
Filter cartridge will withstand temperatures of 185°F (85°C)for up to 30 consecutive minutes.
Cleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibility information.
Steam/Autoclave
Cartridges may be steamed or autoclaved for at least 50thirty minute cycles @ 275°F (135°C).
| 14 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Pleated Polyethersulfone (PES) Membrane forSterile FiltrationZTEC P Sterilizing Grade membrane cartridges are HIMAvalidated for complete bacterial retention to yield productsterility in biopharmaceutical final filtration applications. Thenaturally hydrophilic and low protein binding characteristicsof polyethersulfone membrane ensure maximumtransmission of active ingredients making it ideal for a widerange of pharmaceutical and biological liquid applications,including the filtration of therapeutics, vaccines, antibiotics,bulk pharmaceutical and other critical biotechnologyproducts. The double-layer PES 0.2 micron membrane filtersare manufactured in a cleanroom environment, and integritytested before shipment to assure consistent performanceand quality.
Features–Benefits• Manufactured in an ISO Class 7 Cleanroom Environment • 100% flushed with ultrapure DI water• Meets ASTM Standards for Sterility• Repeatably Steamable/Sanitizable• 100% Integrity tested prior to release• Pore size, lot and serial number are stamped on each
filter element for identification and traceability• Complete validation guide available
Product Specifications Media: Asymmetric Polyethersulfone membrane
Inner core, end caps, cage:Polypropylene
Support layers: Spunbonded Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton (O-Rings only)
Micron ratings: 0.2 μm
DimensionsNominal lengths: 10", 20", 30", 40"
(25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 6.8 ft 2. (0.63 m2) per 10" element
Operating ParametersMaximum sustained operating temperature: 176°F (80°C) at 20 psid (1.38 bar)
Maximum 60 psid @ 80°F (4.14 bar @ 27°C)differential pressure: 30 psid @ 160°F (2.07 bar @ 71°C)
15 psid @ 200°F (1.03 bar @ 93.3°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
ZTEC™P Series Filter Cartridges
Typical Applications• Diagnostics• Ophthalmic Solutions • Culture Media• Reagent Chemicals• LVPs• Buffers• Vaccines
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.2440 as applicable for foodand beverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 15 |
Membrane Fi l ters
Mem
brane Filters
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm
ZTEC P FLOW RATE
ZTEC P Nomenclature Information
ZTEC P 0.2 -20 P2 SEnd ConfigurationP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open End
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)
Retention Rating (microns)0.2
Nominal Length(inches)
-10-20-30-40
Filter TypeZTEC P Series Filters
Example: ZTECP 0.2-20P2S
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Performance Specifications
Hot DI Water
Filter cartridge will withstand temperatures of 185°F(85°C) for up to 30 consecutive minutes.
Cleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibilityinformation.
Steam/Autoclave
Cartridges may be steamed or autoclaved for at least50 thirty minute cycles @ 275°F (135°C).
Typical Bacterial Retention Performance
Cartridges have been validated for the complete retention ofBrevundimonas diminuta at a challenge level of 107
organisms/cm2 as prescribed in ASTM 838-05.
Integrity Test Specifications
Minimum Bubble Point values and maximum Diffusive AirFlow (per 10-inch cartridge) values for ZTEC-P filters wetwith water:Pore Size Bubble Point Diffusive Air Flow
0.2 μm: ≥ 40 psig (2.8 bar) ≤ 30 cc/min @ 32 psig (2.2 bar)
| 16 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Pleated Polyethersulfone (PES) Membrane forCritical Filtration in Beverage Applications
Protect your beverage from spoilage. ZTEC WB cartridgefilters utilize a special polyethersulfone membrane to provideconsistent removal of spoilage organisms and inorganicparticulate. The product offers excellent retention efficiencyand extended on-stream life making it an ideal filter for theclarification of beer, wine and bottled water. The PESmembrane, available from 0.2 to 1.2 μm pore sizes, isdesigned to meet and surpass the filtration criteria necessaryto maintain product quality and characteristics. Produced inan ISO Class 7 cleanroom, the cartridges are integrity testedduring production to assure performance and consistency.
Features–Benefits• Manufactured in an ISO Class 7 Cleanroom Environment• 100% flushed with ultrapure DI water and integrity tested• Low adsorption of protein, color and flavor components• Steamable/sanitizable for cleaning and reuse• High log reduction values for spoilage organisms• PES membrane provides high capacity contaminant
loading• Complete qualification guide available• Quick wet treatment available
Product SpecificationsMedia: Asymmetric Polyethersulfone membrane
Inner core, end caps, cage:Polypropylene
Support layers: Spunbonded Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Ringsonly)
Micron ratings: 0.2, 0.45, 0.65, 1.2 μm
DimensionsNominal lengths: 9.75" 10", 20", 30", 40"
(24.7, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7’’ (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 7.6 ft 2. (0.7 m2) per 10" element
Operating ParametersMaximum sustained operating temperature: 176°F (80°C) at 20 psid (1.38 bar)
Maximum 80 psid @ 70°F (5.5 bar @ 21°C)differential pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
ZTEC™ WB Series Filter Cartridges
Typical Applications• White Wine• Red Wine • Sparkling Wine• Wine/Malt Coolers• Champagne• Distilled Spirits• Bottled Water• Beer
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.2440 as applicable for foodand beverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 17 |
Membrane Fi l ters
Mem
brane Filters
Performance Specifications
Hot DI Water
Filter cartridge will withstand temperatures of 185°F (85°C)for up to 30 consecutive minutes.
Cleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibility information.
Steam/Autoclave
Cartridges may be steamed or autoclaved for at least50 thirty minute cycles @ 275°F (135°C).
Typical Bacterial Retention Performance0.20μm: LRV for Pseudomon aeruginosa ≥ 110.45μm: LRV for Lactobacillus brevis ≥ 7.60.45μm: LRV for Oenococcus oeni ≥ 10.00.45μm: LRV for S. cerevisiae ≥ 11 0.65μm: LRV for S. cerevisiae ≥ 8.7 1.2μm: LRV for S. cerevisiae ≥ 8
Integrity Test Specifications
Minimum Bubble Point values and maximum Diffusive AirFlow (per 10-inch cartridge) values for ZTEC WB filterswet with water:Pore Size Bubble Point Diffusive Air Flow0.20 μm: ≥ 30 psig (2.1 bar) ≤ 35 cc/min @ 25 psig (1.7 bar)0.45 μm: ≥ 20 psig (1.4 bar) ≤ 35 cc/min @ 16 psig (1.1 bar)0.65 μm: ≥ 17 psig (1.2 bar) ≤ 35 cc/min @ 14 psig (1.0 bar)1.2 μm: ≥ 13 psig (0.9 bar) ≤ 35 cc/min @ 11 psig (0.8 bar)
0.2 μm
0.45 μm0.65, 1.2 μm
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
ZTEC WB FLOW RATE
Example: ZTECWB 0.45-20P2E
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
ZTEC WB Nomenclature Information
ZTEC WB 0.45 -20 P2 S -QW
End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal
O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)
Retention Rating (microns)0.20.450.651.2
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeZTEC WB Series Filters
Quickwettreatment
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 19 |
Graver ProductType Media Hardware Retention Ratings (μm) Efficiency
GFC Micro fiberglass Polypropylene 0.2, 0.45, 1, 3, 10, 30 NominalPleated Microfiberglass Beta 10
GFP Micro fiberglass Polyester 0.2, 0.45, 1, 3, 10, 30 NominalPleated Microfiberglass Beta 10
High Flow Polypropylene Polypropylene 1, 3, 5, 10, 20, 40, 60, 100 AbsolutePleated Melt Blown Sheet Beta 1000
High Flow GF Microfiberglass Polypropylene, 1, 2.5, 4.5, 10, 20 AbsolutePleated Microfiberglass Polyacetal/ Polyester Beta 1000
PMA Polypropylene Polypropylene 0.2, 0.45, 1, 2.5, 5, 10, AbsolutePleated Melt Blown Sheet 25, 50, 100 Beta 5000
PMC Polypropylene Polypropylene 0.2, 0.25, 0.45, 0.5, NominalPleated Melt Blown Sheet 1, 2, 5, 10, 25, 50 Beta 10
QCR Polypropylene Polypropylene 1 AbsolutePleated Melt Blown Sheet NSF/ANSI 53
QMA Polypropylene Polypropylene 0.2, 0.45, 1, 2.5, 5, 10, 20 AbsolutePleated Melt Blown Sheet Beta 5000
QMC Polypropylene Polypropylene 0.1, 0.2, 0.4, 0.6, 1, 3, 5, 10 NominalPleated Melt Blown Sheet Beta 20
QXL Polypropylene Polypropylene 0.45, 0.5, 1, 3, 5, 10, 20, 40 AbsolutePleated Melt Blown Sheet Beta 100
Pleated Filters
Pleated
Filters
| 20 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Glass Fiber Cartridges (GFC)This high efficiency, disposable filter element is suited fora wide range of applications. The filter is constructed ofpleated Borosilicate Microfiberglass filter media withgreater surface area for high system flow rate.
Features–Benefits• Micron ratings from 0.2 to 30 μm – Broad application
range• Uniform pore size – High removal efficiency• High surface area – High flow capability and dirt holding
capacity• Long service life – Minimizes maintenance costs• Fixed pore construction – Eliminates dirt unloading at
maximum differential pressure
Product Specifications
Media: Borosilicate Microfiberglass withAcrylic Binder
Inner core: Polypropylene
Support layers: Polyester
End caps: Polypropylene
Cage: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, TeflonEncapsulated Viton (O-Rings only)
Micron ratings: 0.2, 0.45, 1.0*, 3.0, 10, 30 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Operating ParametersMaximum operating temperature: 176 °F (80°C)
Maximum 80 psid @ 70°F (5.5 bar @ 21°C)differential pressure: 40 psid @ 150°F (2.8 bar @ 65°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
* 1 micron grade features all FDA listed materials of construction.
GFC™ Series Filter Cartridges
Typical Applications
• Wine prefiltration
• Chemicals
• Blowdown post filter
• Inks
• Magnetic tape coatings
• Oil & Gas
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 21 |
Pleated Fi l ters
Pleated
Filters
3.0
2.5
2.0
1.5
1.0
0.5
0
0.21
0.17
0.14
0.10
0.07
0.03
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm
0.45 μm1 μm3 μm10 μm30 μm
GFC FLOW RATE
GFC Nomenclature Information
GFC 3 -10 P7 B -IEnd ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-RingNPC Double open end, internal O-Ring
Retention Rating (microns)0.2 30.45 101 30
Nominal Length (inches)-5 -20-9.75 -30-10 -40
Filter TypeGFC Series Filters
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 10 Beta 20 Beta 100 Beta 1000 Beta 5000Efficiency 90% 95% 99% 99.9% 99.98%
0.2 micron 0.2 0.3 0.6 0.8 1.0
0.45 micron 0.45 0.6 0.8 1.8 2.0
1 micron 1.0 1.3 2.0 3.5 4.0
3 microns 3.0 4.0 5.5 9.0 10.0
10 microns 10.0 12.0 15.0 17.0 18.0
30 microns 30.0 35.0 38.0 42.0 45.0
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 2.5 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
Example: GFC 3-10P7B-1
Insert-I endcap insert
for steaming
| 22 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High Temperature Glass Fiber Cartridges (GFP)This high efficiency, disposable filter element is suited fora wide range of applications. The filter is constructed ofpleated Borosilicate Microfiberglass filter media withgreater surface area for high system flow rate.
Features–Benefits• Polyester hardware extends application range beyond
the limits of polypropylene.• Higher temperature capability of 230°F (110°C)• Micron ratings from 0.2 to 30 μm – Broad application
range• Uniform pore size – High removal efficiency• High surface area – High flow capability and dirt holding
capacity• Long service life – Minimizes maintenance costs• Fixed pore construction – Eliminates dirt unloading at
maximum differential pressure
Product Specifications
Media: Borosilicate Microfiberglass withAcrylic Binder
Inner core: Polyester
Support layers: Polyester
End caps: Polyester
Cage: Polyester
Gaskets/O-Rings : Buna-N, EPDM, Silicone, TeflonEncapsulated Viton (O-Rings only)
Micron ratings: 0.2, 0.45, 1.0, 3.0, 10, 30 μm
DimensionsNominal lengths: 5”, 9.75’’, 10’’, 20’’, 30’’, 40’’
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7’’ (6.9 cm)
Inside diameter: 1.0’’ (2.54 cm)
Operating Parameters
Maximum operating temperature: 230 °F (110°C)
Maximum 75 psid @ 70°F (5.2 bar @ 21°C)differential pressure: 60 psid @ 200°F (4.1 bar @ 93°C)
50 psid @ 230°F (3.4 bar @ 110°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
GFP™ Series Filter Cartridges
Typical Applications• Petrochemicals• Chemicals• Solvents• Inks• Oil & Gas• Lube Oil
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 23 |
Pleated Fi l ters
Pleated
Filters
GFP Nomenclature Information
GFP 3 -10 P3 B
3.0
2.5
2.0
1.5
1.0
0.5
0
0.21
0.17
0.14
0.10
0.07
0.03
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm
0.45 μm1 μm3 μm10 μm30 μm
GFP FLOW RATE
End ConfigurationP Double Open EndP2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open End
Retention Rating (microns)0.20.45131030
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeGFP Series Filters
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 10 Beta 20 Beta 100 Beta 1000 Beta 5000Efficiency 90% 95% 99% 99.9% 99.98%
0.2 micron 0.2 0.3 0.6 0.8 1.0
0.45 micron 0.45 0.6 0.8 1.8 2.0
1 micron 1.0 1.3 2.0 3.5 4.0
3 microns 3.0 4.0 5.5 9.0 10.0
10 microns 10.0 12.0 15.0 17.0 18.0
30 microns 30.0 35.0 38.0 42.0 45.0
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 2.5 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
Example: GFP 3-10P3B
| 24 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High Flow Series Filter Cartridges
Large Geometry Pleated Filters for High FlowGraver High Flow Series filters feature a larger geometryto handle higher flows with fewer filter elements. Theresult is much faster, easier filter changeouts. In addition,the inside to outside flow allows for excellent dirt holdingcapacity, extending the time between filter changeouts.Filter housings are also available and because of the filtershigh flow and dirt holding capacity, smaller systems arepossible, reducing upfront capital costs.
Features - Benefits• 6" diameter, large geometry for high flow rates• Absolute retention ratings from 1 to 100 microns• Capable of flow rates up to 500 GPM in a single 60"
element• Inside-out flow retains contaminant even during
changeout • Multi layer pleated construction with optimized surface
area • Outer cage prevents media extrusion problem
experienced with some competitive offerings• Unique Quad Seal gasket provides maximum seal
integrity• Retrofits competitive high flow filter housings• Thermally bonded construction
Product Specifications
Media/Support/Cage: Polypropylene
End caps: Polypropylene
O-Rings: EPDM, Silicone, Buna-N, Viton
Micron ratings: 1, 3, 5, 10, 20, 40, 60, 100 μm
DimensionsNominal lengths: 20", 40", 60"
(50.8, 101.6, 152.4 cm)
Outside diameter: 6.0" (15.2 cm)
Surface area: 24 ft 2. (2.2 m2) per 20"49 ft 2. (4.6 m2) per 40" element73 ft 2. (6.8 m2) per 60" element
Operating ParametersMaximum operating 180°F @ 20 psid (82°C @ 1.4 bar)temperature: 160°F @ 30 psid (71°C @ 2.1 bar)
77°F @ 50 psid (25°C @ 3.4 bar)
Recommended changeoutdifferential pressure: 35 psid (2.4 bar)
Maximum flow rates*: 60" element up to 500 GPM (1892 lpm)40" element up to 350 GPM (1325 lpm)20" element up to 175 GPM (662 lpm)
* Consult factory for sizing assistance based on particle loads.** O-ring should be replaced after 5 cycles or when a loosening of the seal is
detected.
Typical Applications• Water Systems• Chemicals• Food and Beverage• Pre RO
CertificationsFDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.NSF 61 - Certified to NSF/ANSI STD 61 for materialsrequirements only - Component.
Performance SpecificationsCleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibility information.Cartridge will withstand up to ten 30 minute hot watercycles** at 181°F (83°C) at 5 psid (0.35 bar).Steam/Autoclave
Cartridges may be steamed for at least twenty 15 minute cycles** @ 230°F (110°C) not to exceed 3 psid (0.21 bar).
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 25 |
Pleated Fi l ters
Pleated
Filters
Removal EfficiencyMicron Rating 99.9% 99% 90%Beta Ratio Beta 1000 Beta 100 Beta 10
1 micron 1 0.6 0.2
3 micron 3 2 1.5
5 micron 5 4 3
10 micron 10 8.5 6.5
20 micron 22 19 14
40 micron 38 18 15
60 micron 60 35 20
100 micron 100 75 45
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown dueto the variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
Note: For chemical compatibility, flow rates, and temperature requirements please consult the factory or your localGraver distributor.
High Flow Nomenclature Information
High Flow 5 -60 E
Retention Rating (microns)1 203 405 60
10 100
Length (inches)-20-40-60
Filter TypeHigh Flow Series Filters
O-RingS SiliconeB Buna-NE EPDMV VitonExample: HF 5-60E
High Flow Pressure Drop
MicronElement Pressure Drop psid/gpm Element Pressure Drop Mbar/M3/Hr
20" 40" 60" 20" 40" 60"
1 0.0200 0.0097 0.0065 6.0845 2.9395 1.9820
3 0.0167 0.0081 0.0054 5.0705 2.4495 1.6516
5 0.0076 0.0037 0.0025 2.3179 1.1198 0.7550
10 0.0046 0.0022 0.0015 1.3908 0.6719 0.4530
20 0.0021 0.0010 0.0007 0.6374 0.3079 0.2076
40 0.0017 0.0008 0.0006 0.5215 0.2520 0.1699
60 0.0015 0.0007 0.0005 0.4552 0.2199 0.1483
100 0.0010 0.0005 0.0003 0.3035 0.1466 0.0989
| 26 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Large Geometry Pleated Filters for High FlowGraver High Flow GF Series filters feature microfiberglassmedia in a larger geometry to handle higher flows withfewer filter elements. The result is much faster, easier filterchangeouts. In addition, the inside to outside flow allowsfor excellent dirt holding capacity, extending the timebetween filter changeouts. Filter housings are alsoavailable and because of the filters high flow and dirtholding capacity, smaller systems are possible, reducingupfront capital costs.
Features - Benefits• Materials of construction allow compatibility with somechemistries not served by all polypropylene elements.
• 6" diameter, large geometry for high flows• Absolute retention ratings from 1 to 20 microns• Capable of flow rates up to 500 GPM in a single 60"element
• Inside-out flow retains contaminant even duringchangeout
• Outer cage prevents media extrusion problemexperienced with some competitive offerings
• Unique Quad Seal gasket provides maximum sealintegrity
• Retrofits competitive high flow filter housings• Thermally bonded construction
Product Specifications
Media: Microfiberglass
Support/Cage: Polyester or polypropylene
End caps: Polyacetal or polypropylene
O-Rings: EPDM, Silicone, Buna-N, Viton
Micron ratings: 1, 2.5, 4.5, 10, 20 µm
DimensionsNominal lengths: 20", 40", 60"
(50.8, 101.6, 152.4 cm)
Outside diameter: 6.0" (15.2 cm)
Surface area: 24 ft 2. (2.2 m2) per 20" element49 ft 2. (4.6 m2) per 40" element73 ft 2. (6.8 m2) per 60" element
Operating ParametersMaximum operating temperature:polyacetal hardware - 70°F @ 75 psid (21°C @ 5.2 bar)
230°F @ 50 psid (110°C @ 3.4 bar)polypropylene hardware - 77°F @ 50 psid (25°C @ 3.4 bar)
180°F @ 20 psid (82°C @1.4 bar)
Recommended changeoutdifferential pressure: 35 psid (2.4 bar)
Maximum flow rates: 60" element up to 500 GPM (1892 lpm)40" element up to 350 GPM (1325 lpm)20" element up to 175 GPM (662 lpm)
* Consult factory for sizing assistance based on particle loads.
High Flow GF Series Filter Cartridges
Typical Applications• Fuel Oil• Chemicals• Petrochemicals• Solvents• Oil & Gas
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 27 |
Pleated Fi l ters
Pleated
Filters
Note: For chemical compatibility, flow rates, and temperature requirements please consult the factory or your localGraver distributor.
High Flow GF Nomenclature Information
High Flow GF -A 2.5 -60 E
Retention Rating(microns)1 102.5 20
Length (inches)-20-40-60
Filter TypeHigh Flow GF Series Filters
-
O-RingS SiliconeB Buna-NE EPDMV VitonExample: HFGF -A2.5-60E
Removal EfficiencyMicron Rating 99.9% 99% 90%Beta Ratio Beta 1000 Beta 100 Beta 10
1 micron 1 0.6 0.2
2.5 micron 2.5 0.8 0.45
4.5 micron 4.5 2 1
10 micron 10 5.5 3
20 micron 20 15 10
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown dueto the variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
High Flow GF Pressure Drop
MicronElement Pressure Drop psid/gpm Element Pressure Drop Mbar/M3/Hr
20" 40" 60" 20" 40" 60"
1 0.0394 0.0197 0.0131 11.9419 5.9709 3.9806
2.5 0.0183 0.0091 0.0061 5.5385 2.7692 1.8462
4.5 0.0144 0.0072 0.0048 4.3549 2.1775 1.4516
10 0.0095 0.0048 0.0032 2.8830 1.4415 0.9610
20 0.0069 0.0035 0.0023 2.0940 1.0470 0.6980
-
Hardware MaterialP PolypropyleneA Polyacetal caps
polyester cage
| 28 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
“Absolute” Rated Pleated Filter CartridgesThis all polypropylene filter retains particles with absoluteefficiency. Available in a broad range of pore sizes, it issuitable for a wide range of applications. The pleatedconstruction provides a high surface area to offeroutstanding overall filtration economy.
Features–Benefits• Micron ratings from 0.2 to 100 μm – Broad application
range• “Absolute” Efficiency – Rated at 99.98% (Beta 5000)• Competitive surface area – High flow rates, and long
on-line service – Minimize maintenance cost• Fixed pore structure – Eliminates dirt unloading at
maximum differential pressure• Polypropylene Construction – Inert to many process
fluids• Various Gasket/O-Ring materials – Compatible with a
variety of fluids• Manufactured in continuous lengths up to 40 inches
Product Specifications
Media: Polypropylene
Inner core: Polypropylene
End caps: Polypropylene
Cage: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton (O-Rings only), Teflon (gasket only)
Polypropylene micron 0.2, 0.45, 1.0, 2.5, 5.0, 10, 25,ratings: 50, 100 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.86 cm)
Inside diameter: 1.0" (2.54 cm)
Operating ParametersMaximum operating 176 °F (80 °C) temperature:
Maximum 75 psid @ 70 °F (5.2 bar @ 21°C)differential pressure: 40 psid @ 176 °F (2.8 bar @ 80°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
PMA™ Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 29 |
Pleated Fi l ters
Pleated
Filters
PMA Nomenclature Information
PMA 2.5 -10 P V
End ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.Viton (O-Rings only)T Teflon (gasket only)
Retention Rating (microns)0.2 10 0.45 251 502.5 1005
Nominal Length(inches)
-5 -20-9.75 -30-10 -40
Filter TypePMA Series Filters
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.45 μm
1 μm2.5 μm5 μm10, 25, 50 μm100 μm
0.2 μm
PMA FLOW RATE
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 5000 Beta 100 Beta 50Efficiency 99.98% 99% 98%
0.2 micron 0.20 0.10 0.05
0.45 micron 0.45 0.30 0.20
1 micron 1.0 0.60 0.30
2.5 microns 2.5 2.0 1.5
5 microns 5.0 4.0 3.0
10 microns 10.0 8.0 7.0
25 microns 25.0 19.0 15.0
50 microns 45.0 35.0 28.0
100 microns – 100.0 85.0
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown dueto the variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
Example: PMA 2.5-10PV
| 30 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Economically Efficient Pleated Filter CartridgesThis cost effective, disposable filter element can be usedfor a wide range of applications. The filter is constructedof pleated polypropylene filter media with high surfacearea that allows for greater system flow rate.
Features–Benefits• Micron ratings from 0.2 to 50 μm – Broad application
range• Fixed pore structures – Resists unloading of captured
contaminant• Polypropylene Construction – Inert to many process
fluids• Various Gasket/O-Ring materials – Compatible with a
variety of fluids• Economically efficient filtration• Manufactured in continuous lengths up to 40 inches
Product Specifications
Media: Polypropylene
Inner core: Polypropylene
End caps: Polypropylene
Cage: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, TeflonEncapsulated Viton (O-Rings only),Teflon (gasket only)
Micron ratings: * 0.2, 0.25, 0.45, 0.5, 1.0, 2.0, 5.0, 10, 25, 50 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.86 cm)
Inside diameter: 1.0" (2.54 cm)
Operating ParametersMaximum operating 176 °F (80°C) temperature:
Differential pressure: 75 psid @ 70°F (5.2 bar @ 21°C)40 psid @ 176°F (2.8 bar @ 80°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
* Other micron rated media available upon request
PMC™ Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 31 |
Pleated Fi l ters
Pleated
Filters
PMC Nomenclature Information
PMC 2 -20 P8 VEnd ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-RingNPC Double open end, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)T Teflon (gasket only)
Retention Rating (microns)0.2 20.25 50.45 10 0.5 251 50
NominalLength(inches)
-5-9.75-10-20-30-40
Filter TypePMC Series Filters
Example: PMC 2-20P8V
4
3
2
1
0
.28
.21
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.2 μm0.25 μm0.45 μm0.5 μm1 μm2 μm5 μm10 μm25 μm50 μm
PMC FLOW RATE
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 50 Beta 10Efficiency 98% 90%
0.2 micron 0.28 0.20
0.25 micron 0.35 0.25
0.45 micron 0.6 0.45
0.5 micron 0.7 0.5
1 micron 1.5 1.0
2 microns 2.7 2.0
5 microns 7.0 5.0
10 microns 12.0 10.0
25 microns 32.0 25.0
50 microns 70.0 50.0
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown dueto the variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
| 32 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Health Dangers of CryptosporidiumIn recent years, significant outbreaks of water bornedisease have been traced to Cryptosporidium and Giardiaparasites. These naturally occurring organisms are presentin many surface water sources and are highly resistant toinactivation by conventional water treatment processessuch as chlorination. Healthy individuals typically recoverfrom the common gastrointestinal effects within a fewweeks, however for individuals with weakened orundeveloped immune systems, it can be life threatening.
In order to ensure the safety of the water supply,standards have been established that define the minimumperformance requirements for materials and components ofwater treatment systems. The QCR Cyst Reduction filtercontains an absolute 1 micron filter media designed toexceed the ANSI/NSF Standard 53 of 99.95% for theremoval of cysts based upon the polystyrene challenge inwater*.
Features–Benefits• Constructed entirely of polypropylene – Compatible with
most solutions• Double O-Ring style ends for the highest seal integrity• 7.0 ft2 (0.65 m2) of effective filter area – High flow rates
at low pressure drop – High dirt capacity• Various O-Ring materials and configurations – Easily
retrofits most systems• High surface area – High flow rates and long on-line
service
Product Specifications
Media: Polypropylene
Core/cage: Polypropylene
End caps: Polypropylene
O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton
Micron rating: 1.0 μm
End styles: P2 (226/flat), P3 (222/flat), P7 (226/fin), P8 (222/fin)
DimensionsNominal lengths: 5”, 9.75’’, 10’’, 20’’, 30’’, 40’’
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7’’ (6.86 cm)
Inside diameter: 1.0’’ (2.54 cm)
Surface area: 7.0 ft 2. (0.65 m2)
* Performance tested and verified by Independent LaboratoryTesting. Only the filter end styles offered are certified to meet thecyst reduction claim.
Operating ParametersMaximum operating temperature: 176°F (80°C)
Maximum differential 75 psid @ 70°F (5.2 bar @ 21°C)pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
15 psid @ 190°F (1.03 bar @ 88°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
QCR™ Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.NSF 53 - Performance tested and verified by outside labto comply with NSF/ANSI Standard 53 for reduction ofcryptosporidium and giardia cysts.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 33 |
Pleated Fi l ters
Pleated
Filters
2
1
0
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
1 μm
0.2 μm
QCR FLOW RATE
QCR Nomenclature Information
QCR 1 -30 P7 V
End ConfigurationP2 226/Flat Single Open End P3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open End
O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton
Retention Rating (microns)1
Nominal Length(inches)
-5 -20-9.75 -30-10 -40
Filter TypeQCR Series Filters
Example: QCR 1-30P37V
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Performance Specifications
Sterilization
Cartridges may be autoclaved for 30 minutes at 250°F(121°C) under no end load conditions. May be in-linesanitized one time only in forward flow direction with 185°F(85°C) hot water – do not exceed 3 psid.
| 34 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
“Absolute” Rated High Performance PleatedPolypropylene Filter CartridgeThis filter is constructed with a high surface area meltblown polypropylene media for low initial pressure drop,high dirt holding capacity, and high efficiency performance.
Features–Benefits• Micron ratings from 0.2 to 20 μm – Broad application
range• “Absolute” Efficiency – Rated at 99.98% (Beta 5000)• High surface area – High flow rate, and long service life
– Minimize maintenance cost• Fixed Pore construction – Resists dirt unloading at
maximum differential pressure• Polypropylene Construction – Inert to many process
fluids• Various Gasket/O-ring materials – Compatible with
many fluids• Heavy duty molded cage – High structural strength• Highly consistent melt blown media for consistent
performance
Product Specifications Construction material: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Rings only), Teflon (gasket only)
Micron ratings: 0.2, 0.45, 1.0, 2.5, 5.0, 10, 20 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.86 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: up to 7.0 ft 2. (0.65 m2)
Operating ParametersMaximum operating temperature: 176°F (80°C)
Maximum differential 75 psid @ 70°F (5.2 bar @ 21°C)pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
QMA™ Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.Endotoxin level - Limulus Amebocyte Lysate CB028test indicated bacterial endotoxins were not present indistilled water at 0.25 EU / ml.Extractable content - Test indicate that Non-VolatileResidue, Residue on Ignition and Heavy Metals meetUSP limits.
Performance SpecificationsCleaning/Sanitization
Compatible with most common chemical cleaning,sanitizing and sterilizing agents and with pH range from1–14. Consult factory for specific compatibility information.Cartridge will withstand hot water at 176°F (80°C) at 5 psid(0.35 bar) for 30 minutes.
Steam/Autoclave
Cartridges may be autoclaved for 30 minutes at 250 °F(121°C) under no end load conditions. Cartridges fitted withsteam insert may be steamed for at least 10 thirty minutecycles @ 275°F (135°C) not to exceed 3 psid (0.21 bar).
Typical Applications• Food & beverage• Aqueous solutions• Chemicals• Bottled water• Pharmaceuticals• Cosmetics• Process water• RO Prefilters • Inks
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 35 |
Pleated Fi l ters
Pleated
Filters
2
1
0
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.45 μm
1 μm2.5 μm5 μm
10 μm20 μm
0.2 μm
QMA FLOW RATE
QMA Nomenclature Information
QMA 1 -20 P3 V -R -I
End ConfigurationP Double Open End PX Extended CoreP2 226/Flat Single Open End AM Single open end, P3 222/Flat Single Open End internal O-RingP7 226/Fin Single Open End NPC Double open end, P8 222/Fin Single Open End internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)T Teflon (Gasket only)
Retention Rating (microns)0.2 5 0.45 101 202.5
Nominal Length(inches)
-5 -20-9.75 -30-10 -40
Filter TypeQMA Series Filters
Example: QMA 1-20P3V-R-I
Pre-RinseOption-R Factory
Pre-Rinse
Insert-I End cap insert
for steaming
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 5000 Beta 100 Beta 50Efficiency 99.98% 99% 98%
0.2 micron 0.20 0.10 0.05
0.45 micron 0.45 0.30 0.20
1.0 micron 1.0 0.60 0.30
2.5 microns 2.5 2.0 1.5
5.0 microns 5.0 4.0 3.0
10.0 microns 10.0 8.0 7.0
20.0 microns 20.0 17.0 15.0
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 2.5 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
| 36 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High Efficiency Polypropylene Filter CartridgeAn innovative product manufactured with multiple layersof melt blown polypropylene media. This unique structureallows high flow rates while maintaining low differentialpressure and ideal depth filtration characteristics.
Features–Benefits• Micron ratings from 0.1 to 10 μm – Broad application
range• High Filtration Efficiency – 95%• Graded pore structure – Multilayer, media for high dirt
holding capacity• Fixed pore construction – Resists dirt unloading at
maximum differential pressure• Polypropylene construction – Inert to many process
fluids• Various Gasket/O-ring materials – Compatible with
many fluids
Product Specifications
Construction material: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Rings only)
Micron ratings: 0.1, 0.2, 0.4, 0.6, 1.0, 3.0, 5.0, 10.0 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Operating ParametersMaximum operating temperature: 176 °F (80°C)
Maximum 80 psid @ 70°F (5.5 bar @ 21°C)differential pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
Maximum reversedifferential pressure: 40 psid @ 70°F (2.8 bar @ 21°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
Performance SpecificationsSanitization
Hot water at 176°F (80°C) at 5 psid (0.35 bar) for 30 min.In-line steam at 257°F (125°C) at 1psid (0.07 bar) for 30 min.Autoclavable at 257°F (125°C) for 30 min.
QMC™ Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.Endotoxin level - Limulus Amebocyte Lysate CB028test indicated bacterial endotoxins were not present indistilled water at 0.25 EU / ml.Extractable content - Test indicate that Non-VolatileResidue, Residue on Ignition and Heavy Metals meetUSP limits.
Typical Applications• Food & beverage• Aqueous solutions• Chemicals• Pharmaceuticals• Cosmetics• Ultrapure water• RO Prefilters• Ink• DE trap• Photoresists
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 37 |
Pleated Fi l ters
Pleated
Filters
QMC Nomenclature Information
QMC 0.6 -10 P2 T
End ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreAM Single open end, internal O-RingNPC Double open end, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)
Retention Rating (microns)0.1 1 0.2 3 0.45 5 0.6 10
Nominal Length(inches)
-5-9.75-10-20-30-40
Filter TypeQMC Series Filters
Example: QMC 0.6-10P2T
2.1
1.8
1.5
1.2
0.9
0.6
0.3
0
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.1 μm
0.2 μm0.4 μm0.6 μm1 μm
3, 5 μm10 μm
QMC FLOW RATE
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 100 Beta 20Efficiency 99% 95%
0.1 micron 0.8 0.1
0.2 micron 1.0 0.2
0.4 micron 2.0 0.4
0.6 micron 3.0 0.6
1 micron 6.0 1.0
3 micron 14 3.0
5 microns 17 5.0
10 microns 25 10.0
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
| 38 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Absolute Rated Filtration for Inks, Slurries andCoatingsWith its extra-loft, extra-life depth filter configuration, theQXL is designed for the filtration of industrial solutionscontaining agglomerated particles and gels or with highviscosity. Consistent absolute retention performance isachieved throughout the pleated, layered microfiber matrix.The state-of-the-art, optimized structure providessignificantly higher flow rates and throughputs thancylindrical melt blown filters.
Features–Benefits• Hybrid pleated depth construction combines graded
pore structure with high surface area.• Constructed entirely of polypropylene – Compatible with
a broad range of solutions and chemicals• Optimized pleat configuration – Provides the ideal
combination of retention, flow rate and throughput• Excellent gel and agglomerated particle retention reduces
defects• Available in common end cap configurations – Retrofits
easily into most filter housings
Product Specifications Media: Polypropylene
Core,Cage, End Caps: Polypropylene
Gaskets/O-Rings: Silicone, Viton, EPDM, Buna, Teflon encapsulated Viton (O-Rings only)
Micron Ratings: 0.45, 0.5, 1, 3, 5, 10, 20, 40 μm
DimensionsNominal lengths: 5”, 9.75’’, 10’’, 20’’, 30’’, 40’’
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside Diameter: 2.7" (6.86 cm)
Inside Diameter: 1.0’’ (2.54 cm)
Operating ParametersMaximum OperatingTemperature: 176°F (80°C)
Maximum 75 psid @ 70°F (5.2 bar @ 21°C)Differential Pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
Maximum ReverseDifferential Pressure: 35 psid @ 80°F (2.4 bar @ 27°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
Sterilization: Cartridges may be autoclaved for 30 minutes at 250°F (121°C) under noend load conditions. May be in-linesanitized one time only in forward flowdirection with 185°F (85°C) hot water– do not exceed 3 psid.
QXL™ Series Filter Cartridges
Conventional pleated polypropylene filter media such as QMA, PMA and PMC
QXL filter media
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.European Directive for Direct Food Contact -European Regulations No 1935/2004 and Europeandirective 82/711/EEC: Tested for migration behavior indirect food contact. Minimal rinse required for use. Dataavailable upon request.
Typical Applications• CMP P-O-U and bulk slurries• Adhesives• Paints• Beverages• Coatings• Inks
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 39 |
Pleated Fi l ters
Pleated
Filters
QXL Nomenclature Information
QXL 5 -10 P8 SEnd ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndAM Single open end, internal O-Ring NPC Double open end, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)
Retention Rating (microns)0.45* 50.5** 101 203 40
NominalLength(inches)
-5-9.75-10-20-30-40
Filter TypeQXL Series Filters
Example: QXL 5-10P8S
* Special CMP slurry formulation.** Special ink formulation.
21.81.61.41.2
10.80.60.40.2
0
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.5 μm
1 μm
3 μm
5 μm10 μm20 μm40 μm
0.45 μm
QXL FLOW RATE
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 1000 Beta 100 Beta 50Efficiency 99.9% 99% 98%
0.45 micron 0.45 0.3 0.2
0.5 micron 0.65 0.45 0.3
1 micron 1.5 0.8 0.6
3 microns 3 2 1
5 microns 5 4 3
10 microns 10 8 7
20 microns 20 19 17
40 microns 40 35 25
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 41 |
Graver ProductType Media Hardware Retention Ratings (μm) Efficiency
COAX Polypropylene Polypropylene 0.5, 1, 3, 5, 10, 25 NominalBicomponent/Melt Blown Polyethylene Coreless
Crystal MBF Polypropylene Polypropylene 1, 3, 5, 10, 20, 30, 50, 75 NominalMelt blown Fiber Core
MBC Polypropylene Polypropylene 1, 3, 5, 10, 20, 30, 50, 75 NominalMelt blown Molded Core
Stratum A Polypropylene Polypropylene 0.5, 1, 3, 5, 10, 20, AbsoluteMelt blown Molded Core 30, 50, 70 Beta 1000
Stratum C Polypropylene Polypropylene 0.5, 1, 3, 5, 10, 20, NominalMelt blown Molded Core 50, 75 Beta 10
Depth Filters
Dep
th Filters
| 42 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Two Stage Depth Filter CartridgeThe COAX Depth Filter cartridge is an integral two stagedepth filter. The first stage is made of nonwoven meltblown polypropylene to trap coarser particles. Thesecond stage is composed of a bicomponentpolypropylene and polyethylene fiber to provide fineparticle retention. This unique design provides a truegraded, two zone structure that offers a marked increasein useful life and dirt capacity. In addition, the rigid naturemeans there is no flexing of the cartridge and greatlyreducing media migration and particle unloading.
Features–Benefits• Two stage depth filter• Maximum dirt holding and useful life• Inert pure polyolefin construction, non-shedding media
• Broad chemical compatibility
• Low extractables
• Extensive range of lengths and configurations
• Rigid construction resists unloading
Product Specifications
Media: Thermally bondedPolypropylene/polyethylene fiber
End caps: Polypropylene (when used)
Gaskets/O-Rings : Silicone, EPDM, Buna N, Santoprene, Viton, Teflon encapsulated Viton (O-Rings only)
Micron ratings: 0.5, 1, 3, 5, 10, 25 μm
DimensionsNominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.6" (6.5 cm)
Inside diameter: 1.0" (2.54 cm)
Operating Parameters
Maximum operating 140 °F (60°C)
Maximum 100 psid @ 70°F (7 bar @ 21°C)differential pressure: 2 psid @ 176°F (0.14 bar @ 80°C)
Recommendedchange-out pressure: 35 psid (2.4 bar)
Performance SpecificationsSanitization
Hot water at 176°F (80°C) at 2 psid (0.14 bar) for 30 min.In-line steam at 257°F (125°C) at 1psid (0.07 bar) for 30 min.Autoclavable at 257°F (125°C) for 30 min.
COAX™ Series Filter Cartridges
Typical Applications
• Paint
• Perfumes
• Cutting Oils
• CMP Slurries
• Magnetic Slurries
• Corn Syrup
• Plating Solutions
• Pre R.O.
• Coatings
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 43 |
Depth Fi l ters
Dep
th Filters
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0.24
0.21
0.17
0.14
0.10
0.07
0.03
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
0.5 μm
1 μm3 μm5 μm10 μm25 μm
COAX FLOW RATE
COAX Nomenclature Information
COAX 25 -40 RL P3 B
End ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)AM Single Open End, internal O-RingDBG Direct Bond Santoprene Gaskets
Retention Rating(microns)
0.5 3 101 5 25
Nominal Length (inches)-5 -10 -30-9.75 -20 -40
COAX Series Filters Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)N None
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 10 Beta 20 Beta 100Efficiency 90% 95% 99%
0.5 micron 0.5 2.0 4.0
1 micron 1.0 3.0 8.0
3 microns 3.0 5.0 12.0
5 microns 5.0 8.0 20.0
10 microns 10.0 13.0 30.0
25 microns 25.0 30.0 50.0
Example: COAX 25-40RLP3B
Length OptionBlank Standard lengthRL Reduced length
| 44 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
CrystalMBFSeries Filter Cartridges
Melt Blown FiltersAn economical, disposable, filter element that can be usedin a wide range of applications. The Crystal MBF depth filter is constructed of 100% polypropylene media forchemical compatibility with a variety of process fluids. Theunique Crystal Core prevents collapse even at elevatedtemperatures.
Features–Benefits• Available in nominal ratings from 1 to 75 microns
• Formed Crystal Core for excellent collapse strength
• Graded pore construction for long on-stream life
• Melt blown media resists dirt unloading as differentialpressure increases
• Non-shedding
• High dirt holding capacity
• Economical depth filtration
• Thermal bonded endcaps optional
• Free of binders, adhesives and surfactants
• Highly consistent performance
Product Specifications
Media: Polypropylene
End caps/Center core: Polypropylene
Gaskets/O-Rings: Silicone, EPDM, Buna N, Santoprene,Viton, Teflon encapsulated Viton(O-Rings only)
Micron ratings: 1, 3, 5, 10, 20, 30, 50, 75 μm
DimensionsNominal lengths: 9.75", 10", 20", 30", 40", 50"
(24.8, 25.4, 50.8, 76.2, 101.6, 127 cm)Other lengths available
Outside diameter: 2.5" (6.35 cm), 2.63" (6.7 cm) Endcapped
Inside diameter: 1.1" (2.79 cm)
Operating ParametersMaximum differential 65 psid @ 68°F (4.5 bar @ 20°C)pressure: 50 psid @ 100°F (3.4 bar @ 38°C)
25 psid @ 170°F (1.7 bar @ 77°C)
Recommended changeoutdifferential pressure: 35 psid (2.4 bar)
*NSF61 applies to NN, P6 and PX styles only.
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.NSF 61 - Certified to NSF/ANSI STD 61 for materialsrequirements only - Component.*
Typical Applications• RO Prefilters• Wastewater• Food & beverage• Chemicals• Blowdown post filter• Rad waste• Aqueous solutions• Inks
Outerprefilterzone
Finalprefilterzone
Finalfiltrationzone
Innerprefilterzone
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 45 |
Depth Fi l ters
Dep
th Filters
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
20 μm30 μm50, 75 μm
.2.18.16.14.12.10.08.06.04.02
0
.014
.011
.008
.006
.003
0
1 μm 3 μm 5 μm 10 μm
Crystal MBF FLOW RATE
Crystal MBF Nomenclature Information
CMBF 10 -20 N N -BBEnd ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One
EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)DBG Direct Bond Santoprene
Gaskets
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap. Viton (O-Rings only)N None
Retention Rating (microns)1 203 305 5010 75
Nominal Length (inches)
-4-5-9.75-10-19.5-20-29.25-30-39-40-50
Filter TypeCrystal MBF SeriesFilters
Example: CMBF 10-20NN-BB
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Blank Individually bagged-BB Single bulk bag
| 46 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Melt Blown FiltersAn economical, disposable, filter element that can be usedin a wide range of applications. The MBC depth filter isconstructed of 100% polypropylene media for chemicalcompatibility with a variety of process fluids. The moldedcore prevents collapse even at elevated temperatures.
Features–Benefits• Available in nominal ratings from 1 to 75 microns
• Molded core for excellent collapse strength
• Graded pore construction for long on-stream life
• Melt blown media resists dirt unloading as differentialpressure increases
• Non-shedding
• High dirt holding capacity
• Economical depth filtration
• Thermal bonded endcaps optional
• Free of binders, adhesives and surfactants
Product Specifications
Media: Polypropylene
End caps/Center core: Polypropylene
Gaskets/O-Rings: Silicone, EPDM, Buna N, Santoprene,Viton and Teflon encapsulated Viton(O-Rings only)
Micron ratings: 1, 3, 5, 10, 20, 30, 50, 75 μm
DimensionsNominal lengths: 9.75", 10", 20", 30", 40"
(24.8, 25.4, 50.8, 76.2, 101.6 cm)Other lengths available
Outside diameter: 2.5" (6.35 cm), 2.63" (6.7 cm) Endcapped
Inside diameter: 1.0" (2.54 cm)
Operating Parameters Maximum differential 150 psid @ 68°F (10.3 bar @ 20°C)pressure: 90 psid @ 150°F (6.2 bar @ 66°C)
35 psid @ 176°F (2.4 bar @ 80°C)
Recommended changeoutdifferential pressure: 35 psid (2.4 bar)
*NSF61 applies to NN, P6 and PX styles only.
MBC™ Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.NSF 61 - Certified to NSF/ANSI STD 61 for materialsrequirements only - Component.*
Typical Applications• RO Prefilters• Wastewater• Food & beverage• Chemicals• Blowdown post filter• Rad waste• Aqueous solutions• Inks
Outerprefilterzone
Finalprefilterzone
Finalfiltrationzone
Innerprefilterzone
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 47 |
Depth Fi l ters
Dep
th Filters
1.00.90.80.70.60.50.40.30.20.1
0
.069
.055
.041
.027
.014
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
1 μm3 μm5 μm10 μm20 μm30 μm50 μm75 μm
MBC FLOW RATE
MBC Nomenclature Information
MBC 10 -20 N N
End ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)DBG Direct Bond Santoprene Gaskets
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)N None
Retention Rating (microns)1 203 305 5010 70
Nominal Length (inches)
-4-5-9.75-10-19.5-20-29.25-30-39-40
Filter TypeMBC Series Filters
Example: MBC 10-20NN
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
| 48 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Absolute Rated Melt Blown FiltersStratum A Series melt blown depth filters deliver 99.9%efficiency at the stated micron for the most demandingapplications. By utilizing ultra fine fibers and controlledthermal bonding, the Stratum A series retains capturedcontaminant even at higher differential pressures.
Features - Benefits• Absolute retention ratings from 0.5 to 70 microns• Multi-zone melt blown depth filter with a graded pore
structure for maximum dirt holding capacity• Thermally bonded fibers for high void volume and long
on-stream life• Lot traceable filters come with certificate of
conformance.• 100% pure virgin polypropylene• Molded center core for higher temperature and pressure
capability• Free of surfactants, binders and adhesives
Product Specifications
Media: Polypropylene
End caps/center core: Polypropylene
Gaskets/O-Rings: Silicone, EPDM, Buna N, Santoprene,Viton, Teflon encapsulated Viton(O-Rings only)
Micron ratings: 0.5, 1, 3, 5, 10, 20, 30, 50, 70 μm
DimensionsNominal lengths: 4", 5", 9.75", 10", 19.5", 20", 29.25",
30", 39", 40" (10.2, 12.7, 24.8, 25.4, 49.5, 50.8, 74.3, 76.2, 99.1, 101.6 cm)
Outside diameter: 2.5" (6.35 cm)
Inside diameter: 1" (2.54 cm)
Operating ParametersMaximum differential 150 psid @ 68°F (10.3 bar @ 20°C)pressure: 90 psid @ 150°F (6.2 bar @ 66°C)
35 psid @ 176°F (2.4 bar @ 80°C)
Recommended changeoutdifferential pressure: 35 psid (2.4 bar)
Steam Sterilization: Stratum single open end style filtersmay be autoclaved under no end loadconditions for 30 minutes at 121°C.Filters should be cooled to normal operating temperatures prior to use.
*NSF61 applies to NN, P6 and PX styles only.
Stratum™ A Series Filter Cartridges
Typical Applications• Chemicals• Pharmaceuticals• Paint/Inks• Food and beverages• Water• Microelectronics• Plating• Cosmetics
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.NSF 61 - Certified to NSF/ANSI STD 61 for materialsrequirements only - Component.*
Outerprefilterzone
Finalprefilterzone
Finalfiltrationzone
Innerprefilterzone
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 49 |
Depth Fi l ters
Dep
th Filters
5.04.54.03.53.02.52.01.51.00.5
0
0.35
0.28
0.21
0.14
0.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
10 μm
20 μm30 μm50 μm70 μm
0.5 μm 1 μm 3 μm 5 μm
Stratum A FLOW RATE
Stratum A Nomenclature Information
STA 0.5 -10 P2 TEnd ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)DBG Direct Bond Santoprene GasketsAM Single open end, internal O-RingNPC Double open end, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)N None
Retention Rating (microns)0.5 201 303 505 7010
Nominal Length (inches)
-4-5-9.75-10-19.5-20-29.25-30-39-40
Filter TypeSTA - Stratum ASeries Filters
Example: STA 0.5-30NN
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyMicron Rating 99.9% 99% 90%Beta Ratio Beta 1000 Beta 100 Beta 10
0.5 micron 0.6 0.5 0.4
1 micron 1.0 .8 .5
3 micron 3 2.3 1.4
5 micron 5 4.0 2.7
10 micron 10 7 4
20 micron 20 15 12
30 micron 30 20 14
50 micron 50 34 25
70 micron 70 50 39
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 3 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
| 50 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High Performance FiltersFor critical customer applications requiring precise andrepeatable depth filtration, the Graver Stratum C seriesmelt blown filters deliver exceptional performance. With amulti- zoned construction, true clarifying filtration isachieved with no unloading of captured contaminant.
Features - Benefits• Multi-zone melt blown depth filter with a true graded
pore structure• Thermally bonded fibers for high void volume and long
on-stream life• Available in precise 90% removal efficiencies from 0.5 to
75 microns• 100% pure virgin polypropylene• Molded center core for higher temperature and pressure
capability• Free of surfactants, binders and adhesives
Product Specifications
Media: Polypropylene
End caps/center core: Polypropylene
Gaskets/O-Rings: Silicone, EPDM, Buna N, Santoprene,Viton, Teflon encapsulated Viton(O-Rings only)
Micron ratings: 0.5, 1, 3, 5, 10, 20, 50, 75 μm
DimensionsNominal lengths: 4", 5", 9.75", 10", 19.5", 20", 29.25",
30", 39", 40" (10.2, 12.7, 24.8, 25.4, 49.5, 50.8, 74.3, 76.2, 99.1, 101.6 cm)
Outside diameter: 2.5" (6.35 cm), 2.63" (6.7 cm) Endcapped
Inside diameter: 1" (2.54 cm)
Operating ParametersMaximum differential 150 psid @ 68°F (10.3 bar @ 20°C)pressure: 90 psid @ 150°F (6.2 bar @ 66°C)
35 psid @ 176°F (2.4 bar @ 80°C)
Recommended changeoutdifferential pressure: 35 psid (2.4 bar)
Steam Sterilization: Stratum single open end style filtersmay be autoclaved under no end loadconditions for 30 minutes at 121°C.Filters should be cooled to normal operating temperatures prior to use.
*NSF61 applies to NN, P6 and PX styles only.
Stratum™ C Series Filter Cartridges
Typical Applications• Chemicals• Pharmaceuticals• Paint/Inks• Food and beverages• Water• Microelectronics• Plating• Cosmetics
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, and 177.1520, as applicable for food andbeverage contact.NSF 61 - Certified to NSF/ANSI STD 61 for materialsrequirements only - Component.*
Outerprefilterzone
Finalprefilterzone
Finalfiltrationzone
Innerprefilterzone
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 51 |
Depth Fi l ters
Dep
th Filters
5.04.54.03.53.02.52.01.51.00.5
0
0.35
0.28
0.21
0.14
0.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
5 μm
10 μm20 μm50 μm75 μm
0.5 μm 1 μm 3 μm
Stratum C FLOW RATE
Stratum C Nomenclature Information
STC 5 -10 P3 V
End ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP6 Self-Seal Spring on One EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndPX Extended CoreN None (Cut Ends)DBG Direct Bond Santoprene GasketsAM Single open end, internal O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)N None
Retention Rating (microns)0.5 201 503 705 10
Nominal Length (inches)
-4-5-9.75-10-19.5-20-29.25-30-39-40
Filter TypeSTC - Stratum CSeries Filters
Example: STC 5-10P3V
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 53 |
Graver ProductType Media Hardware Retention Ratings (um) Efficiency
GSTACK Modules Cellulose with Polypropylene 0.25 to 15 NominalLenticular DE or Perlite
RTEC P Acrylic/Phenolic Polyester 5, 10, 25, 50, 75, 100 NominalResin bonded available
Steris Replacement PES membrane or Polypropylene 0.2 Nominal orPleated polypropylene sheet Absolute
TPM Titanium Titanium 0.5, 2, 5, 10, 15, 35 NominalSintered Powder Metal Beta 200
Specialty Filters
Sp
ecialty
| 54 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Lenticular Depth Filter ModulesGStack Series depth filter modules are designed in alenticular format for fluid clarification applications.Consisting of either cellulose with diatomaceous earth orcellulose with perlite, a formulation is available to achieveexcellent particle and haze removal. Grades are alsoavailable with water absorbing capability or that meetpharmaceutical requirements.
Features–Benefits• Proven performance cellulose based filter sheet media• Choice of DE or perlite filter aids• Nominal retention ratings from 0.25 to 15 microns• High efficiency due to positive zeta potential• Exceptional mechanical strength• Choice of flat gasket seal or double o-ring seal• Choice of economical stainless steel bands or rigid
molded polypropylene core• Special water absorbing component is available in
the 10 and 15 micron grades• Steam sterilizable• Media grade stamped on sheets for easy identification
Product Specifications Media/Microns (nominal):Cellulose/DE - 0.25, 0.3, 0.5, 0.8, 1.0, 2.5, 5, 10Cellulose/Perlite - 0.5, 1.0, 2.5, 5, 10, 15Water absorbing - 10, 15
Hardware:End caps & cell edge seals - PolypropyleneCenter support - Stainless steel bands or polypropylene core
O-Rings: Buna-N, Silicone, EPDM, Viton, Teflon
Filtration Area:12"/16 cell - 18.5 sq ft (1.7 sq m)16"/16 cell - 40 sq ft ( 3.7 sq m)12"/14 cell water absorbing grade - 16.2 sq ft (1.5 sq m)
DimensionsNominal diameter: 12” or 16” (287 mm, 405 mm)
# of Cells per stack 16 (14 for water absorbing grade)
Height: 10 7/8” (276 mm)
Operating ParametersMaximum operating temperature: 176°F (80°C)
Maximum differentialpressure: 35 psid (2.4 bar)
Steam in place: 266°F (130°C) for 30 minutesat 25 psid maximum (1.7 bar)
Hot water 176°F (80°C) for 30 minutessanitization: at up to 14 psid (1 bar)
GSTACK Series Filter Modules
Typical Applications• Wine/Beer• Sweeteners• Silicone oils• Cosmetics• Adhesives• Pharmaceuticals• Flavors/Fragrances• Edible oils• Distilled spirits
CertificationsUSP Class V - Meets USP Class V Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Section177.2260, as applicable for food and beverage contact.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 55 |
Specialty Fi l ters
Sp
ecialty
GSTACK Flow Rate
GSTACK Nomenclature Information
GS 2 16 D2.5 P C B
MediaCellulose/DE Cellulose Water
Perlite Absorbing *D0.25 L0.3 W10D0.3 L0.5 W15D0.5 L1D0.8 L2.5D1 L5D2.5 L10D5 L15D10
GradeBlank IndustrialP Pharmaceutical
Diameter2 12"6 16"
Cells1614
(W grade)
Filter TypeGSTACK Series Filters
Example: GS 216D2.5PCB
Core/End Style S SS bandsC PP core/flat gasketO PP core/O-Ring
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon
NOTE: Flow rate applies to water at 70°F at 1 psid clean differential. For different fluid characteristics, testing is highly recommended for propersizing.
Media Grade Nominal RetentionRating (microns)
Practical Water Flow Rate (GPM)
Cellulose/DE Cellulose/Perlite Water Absorbing 12", 16 cell 16", 16 cell Water Absorbing 12"
D0.25 0.25 - 0.5 1 - 2 2 - 4
D0.3 L0.3 0.3 - 0.5 2 - 3 4 - 6
D0.5 L0.5 0.5 - 0.8 3 - 4 6 - 8
D0.8 0.8 - 2 4 - 5 8 - 10
D1 L1 1.0 - 3.0 6 - 7 12 - 14
D2.5 L2.5 2.5 - 4 6 - 10 13 - 21
D5 L5 5 - 12 20 - 26 43 - 56
D10 L10 W10 10 - 25 25 - 35 50 - 60 18
L15 W15 15 - 40 40 - 50 60 - 70 18
* Water grade is only available in 12" with SS bands.
| 56 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Rigid Resin Bonded FiltersRTEC P Series filters feature an polyester fiber/phenolicresin construction that produces an extremely rigid porestructure. This construction allows the filter to withstandextremes of viscosity and temperature withoutcompression or collapse. In addition, a true gradeddensity construction allows complete utilization of thefilter’s depth, with coarse particles captured in the outerzones and finer particles captured nearer the core.
Features–Benefits• Rigid polyester fiber/phenolic resin construction
prevents unloading even at high differential pressures• Grooved outer surface increases surface area for longer
on-stream life• Available in a wide range of removal efficiencies from
1 to 100 microns• Available with optional end configurations for installation
in most housings• No metal or plastic cores for easier disposal• Broad chemical compatibility
Product Specifications
Media: Polyester Fiber/Phenolic Resin
Optional End Caps: Polyester
Multi length bonding agent: Polyamide Hot Melt
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton,Teflon Encapsulated Viton (O-Ringsonly)
Micron ratings: 1, 5, 10, 25, 50, 75, 100 μm
DimensionsNominal lengths: 9.75", 10" 19.5", 20", 29.25", 30", 39",
40" (24.8, 25.4, 49.5, 50.8, 74.3, 76.2, 99.1, 101.6 cm)
Outside diameter: 2.45" (6.22 cm)
Inside diameter: .98 - 1.10" (25 - 28 mm) tapered
Operating ParametersMaximum operating 75 psid @ 68°F (5.2 bar 20°C) temperature: * 15 psid @ 200°F (1.0 bar 93°C)
for lengths >10” with glued segments
20 psid 220°F (1.4 bar 104°C)for 10” lengths 200 ˚F (93˚C) in gas
Recommendedchange-out pressure: 35 psid (2.4 bar)
* Always check compatibility with the specific process fluid at the specific applicationtemperature.
RTEC™ P Series Filter Cartridges
Typical Applications *• Paints, Inks• Sealants• Adhesives• Lacquers, Varnishes,
Shellacs• Fuel Oils, Crude Oils,
Grease• Machine Coolants• Silicones• Antifreeze• Plasticizers• Animal Oils
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 57 |
Specialty Fi l ters
Sp
ecialty
RTEC P Nomenclature Information
RTEC P 5 -20 N N
End ConfigurationP Double Open End P2 226/Flat Single Open EndP3 222/Flat Single Open EndP7 226/Fin Single Open EndP8 222/Fin Single Open EndN None
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)N None
Retention Rating (microns)1 505 7510 10025
Nominal Length(inches)
-9.75-10-19.5-20-29.25-30-39-40
Filter TypeRTEC P Series Filters
Example: RTEC P 5-20NN
1.21.11.00.90.80.70.60.50.40.30.20.1
0
.083
.069
.055
.041
.028
.014
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
5 μm
10 μm25 μm50 μm75 μm100 μm
1 μm
RTEC P FLOW RATE
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Note:For chemical compatibility, flow rates, and temperaturerequirements please consult the factory or your local Graverdistributor.
| 58 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Graver Technologies’ replacementA and B filters, for Steris machinesoffer excellent protection for thefinal sterile filter.
Features–Benefits
• Replacement A & B filters are designed to effectivelyprotect and extend the life of the final sterile filter
• Choice of endcap styles to fit your housings
• Meets FDA Standards – All material used in theconstruction of the filters meets FDA (Food and DrugAdministration) Title 21 of the CFR
• Clean manufacturing process is used whicheliminates the use of glues or epoxies
• End caps are thermo-bonded to the media andsupport hardware
• High dirt holding capacity
• Longer on-line service reduces valuable maintenancetime
• Fixed pore construction eliminates dirt unloading orfiber releasing
Product Specifications - Steris "A" ReplacementMedia: Polypropylene
Inner core, end caps,cage: Polypropylene
Gaskets/O-Rings: Silicone
Nominal micron rating: 0.2 μm
DimensionsNominal length: 9.8" (24.9 cm) DOE
Nominal outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 4.4 ft 2. (0.41 m2) for SOE5.1 ft 2. (0.47 m2) for DOE
Operating ParametersMaximum operating temperature: 175°F (80°C)
Maximum differentialpressure: 40 psid @ 175°F (2.8 bar @ 80°C)
Nominal flowrates: 6 GPM/psid (22 LPM/0.07 bar)
Product Specifications - Steris "B" ReplacementMedia: Polyethersulfone membrane
Inner core, end caps,cage: Polypropylene
O-Rings: Silicone or EPR
Absolute micron rating: 0.2 μm
DimensionsNominal length: 10.8" (27.4 cm) SOE
Nominal outside diameter: 2.7" (6.9 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: 7 ft 2. (0.56 m2)
Operating ParametersMaximum operating temperature: 180°F (82°C)
Maximum differentialpressure: 30 psid @ 160°F (2.07 bar @ 71°C)
Nominal flow rates: 2.15 GPM/psid (8.1 LPM/0.07 bar)
Steris® Replacement Series Filter Cartridges
CertificationsUSP Class VI - Meets USP Class VI Biological Test forPlastics.FDA Listed Materials - All Materials comply with FDATitle 21 of the Code of Federal Regulations Sections174.5, 177.1520, and 177.2440 as applicable for foodand beverage contact.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 59 |
Specialty Fi l ters
Sp
ecialty
PREFILTER A
PRESSURE RELEASEBUTTON
PRESSURE RELEASEBUTTON
GASKET
PREFILTER B
TWO O–RINGS
HOUSING BODY A
HOUSING BOWL A
HOUSING BODY B
HOUSING BOWL B
WATER SUPPLYVALVE
(Illustration depicts a double open ended option)
GASKET
FLOWA B
Steris Replacement Filter Specifications
Note: For chemical compatibility, flow rates, and temperature requirements please consult the factory or your localGraver distributor.
Steris "A" Replacement Filter Steris "B" Replacement Filter
Steris Replacement Configuration OptionsPart Number Description
"A" FilterFPLGT00100 Double open end with silicone flat gasket seal.
F801030000 Single open end with internal 214 silicone O-Ring. Recessed cup on closed end to fit over housing post.
"B " FilterFPLGT00200 Single open end with 2-222 silicone O-Rings. Flat cap on closed end.
F80D000013 Single open end with 2-222 EPR O-Rings. Recessed cup on closed end to fit over housing post.
| 60 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Titanium Porous Metal TechnologyTPM series filters are porous titanium filters designed forapplications involving heat, gases, aggressive chemicals,cryogenics or polymers. Made from titanium powder, thatis sintered to form a rugged, fixed pore structure, TPMfilters are made to withstand temperature extremes, highpressures and repeated cleaning/backwash cycles. Thereare no longitudinal seams, for improved mechanicalstrength and corrosion resistance. TPM filters areproduced in a range of configurations and micron ratingsto perform in a variety of liquid and gas applications.
Features–Benefits• Constructed entirely of sintered titanium powder
– Offers high corrosion resistance• Cleanable/Backwashable – Allows for re-use
– Maximum economy• High Temperature Sintering – No media migration• Various gasket/O-Ring materials and configurations
– Easily retrofits most systems
Product Specifications
Media: Titanium
End caps: Titanium
Gaskets/O-Rings: EPR, Buna-N, Viton, TeflonEncapsulated Viton (O-Rings only),Teflon (gasket only)
Micron ratings: 0.5, 2, 5, 10, 15, 35 μm
DimensionsNominal lengths: 10’’, 20’’, 30’’
(25.4, 50.8, 76.2 cm)
Outside diameter: 2.75’’ (70 mm) or 2.36’’ (60 mm)
Operating Parameters
Maximum operating 700°F (371°C)*
Maximum 250 psid (17.4 bar) forward)differential pressure: 50 psid (3.5 bar) reverse
Recommendedchange-out pressure: 35 psid (2.4 bar)
* Max temperature applicable to NPT style filters only (No O-Rings orgaskets). Consult Graver Technologies for guidance on specificchemical/temperature compatibility.
TPM™ Series Filter Cartridges
Typical Applications
• Corrosive liquids and gases
• Cryogenic fluids
• High viscosity solutions
• Process steam
• High temperature liquids and gases
• Catalyst recovery
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 61 |
Specialty Fi l ters
Sp
ecialty
2
1
0
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
10 μm
15 μm
35 μm
0.5 μm 2 μm 5 μm
TPM 2.36" (60 mm) FLOW RATE
TPM Nomenclature Information
TPM S 10 -30 M1 N
End ConfigurationP Double Open End * P2 226/Flat Single Open EndP3 222/Flat Single Open EndM1 3⁄4 Inch MNPT ThreadsM2 1 Inch MNPT Threads
NominalLength (inches)-10-20-30
Filter TypeTPM Series Filters
Gasket or O-RingS SiliconeB Buna-NE EPDMV VitonT Teflon endcap.
Viton (O-Rings only)T Teflon (gasket only)N None
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Removal EfficiencyBeta Ratio Beta 200 Beta 20 Beta 10Efficiency 99.5% 95% 90%
0.5 micron 0.5 micron 0.3 micron 0.1 micron
2 microns 2 micron 0.8 micron 0.4 microns
5 microns 5 micron 3 microns 1 microns
10 microns 10 microns 8 microns 5 microns
15 microns 15 microns 12 microns 10 microns
35 microns 35 microns 32 microns 28 microns
Beta Ratio = Upstream particle counts
Downstream particle counts
The micron ratings shown at various efficiency and beta ratio value levelswere determined through laboratory testing, and can be used as a guidefor selecting cartridges and estimating their performance. Under actualfield conditions, results may vary somewhat from the values shown due tothe variability of filtration parameters.
Testing was conducted using the single-pass test method, water at 2.5 gpm/10'' cartridge. Contaminant's included latex beads, coarse andfine test dust. Removal efficiencies were determined using dual lasersource particle counters.
*Note: DOE style is not compatible with SCB housings.
Example: TPM S10-30M1N
Diameter OptionBlank 2.75" diameterS Slim 2.36" diameter
RetentionRating(microns)0.525101535
2
1
0
.14
.07
0
Diff
eren
tial
Pre
ssu
re
BAR PSI
0 7.6 15.1 22.7 30.3 LPM
0 2 4 6 8 USGPM
Typical Flow Rate Clean Water at Ambient Temperature(per 10''cartridge)
10 μm
15 μm
35 μm
0.5 μm 2 μm 5 μm
TPM 2.75" (70 mm) FLOW RATE
For liquids other than water, multiply pressure drop by the fluidviscosity in centipoise
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 63 |
Code or Material of Cartridge End Number Max OperatingGraver Product Non-Code Construction Configuration of Filters Pressure (psig/bar)
GSTACK Code & 316L DOE or 1, 2, 3, 4 100/6.9Non-Code Double O-ring
High Flow Code & 304, 316, Special 1, 3, 4, 7 150/10.3 Non-Code and Carbon Steel Quad Seal
IHP Non-Code 316L SS DOE, 222, 226 1, 3, 5, 7, 125 or 200/8.612, 21 or 13.8
LPF Non-Code 304L or 316L SS DOE, 222, 226 3, 5, 7, 150/10.312, 21
MC Non-Code 304L or 316L SS DOE 4, 5, 7, 12, 150/10.322, 36, 52
SC Non-Code 304L or 316L SS DOE or 222 1 250 or 300/17.2 or 20.7
SHP Non-Code 316L SS DOE, 222, 226 1, 3, 5, 7 125 or 200/8.6or 13.8
Custom Code & Call FactoryNon-Code
Filter Housings
Ho
usings
| 64 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Lenticular Depth Filter HousingsSanitary Housing, designed for use with Graver GSTACKSeries Depth Filter Modules. GSTACK housings featurehighly polished finish, sanitary fittings, vent connection,and no internal threads to meet the needs of high purityapplications. The vertical configured housings areconstructed of all 316L SS materials as standard in sizesto hold from 1 to 4 modules. The split dome in the 3 and4 high allow flexibility to run different number of modulesand also facilitates complete cleaning whendisassembled.
Features–Benefits• Accepts flat gasket or o-ring style lenticular filter
elements• Select from 2 diameters to accept either 12" or 16"
modules• 316L stainless steel with 180 grit finish• 1.5" Sanitary tri-clamp Inlet & Outlet with 90 deg
elbows • Split dome for size flexibility and easy cleaning• 0-60 psi stainless steel non-sanitary gauge• V-Band Clamp Closure • 60 PSIG Design Pressure• EPDM Elastomers/Gaskets• Non-Adjustable Legs with foot pads• Top Vent
Product Specifications
Construction: 316 L Stainless Steel wetted parts
Shell Gasket Standard: EPDM
Optional Gaskets: Buna-N, Neoprene, Viton, Silicone,Teflon Encapsulated Silicone
Operating ParametersMaximum operating 100 psig (6.9 bar) @pressure: 200°F (93°C) in aqueous solutions
175°F (79°C) for oil based solutions
Flow Rate: 1 GPM/ft2 of media surface area
GSTACK Series Filter Housings
Available Options• Electropolish or <30 Ra polish for liquid contact parts • ASME Code available• Drains
Typical Applications• Pharmaceuticals• Chemicals• Cosmetics• Food and beverage
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 65 |
Housings
Ho
usings
GSTACK Housing Specifications
GSTACK Housing Nomenclature Information
GSH 12 03 FG TC1.5 E -EP Inlet/OutletTC1.5 1.5" Tri-clamp
(for 12")TC2 2" Tri-clamp
(for 16")Module Diameter12 12"16 16"
# ofModules01 102 203 304 4
ModelGSTACK Series
Example: GSH 1203FGTC1.5E-EP
OptionsEP ElectropolishedD DrainG Pressure gauge
GasketS SiliconeB Buna-NE EPDMV VitonN NitrileT Teflon encap.
silicone
* Based on 16 cell pack. Dimensions include support legs.
ModelHeight Base Width Weight Empty Filter Area*
(in) (mm) (in) (mm) (lbs) (kg) (ft2) (m2)
GSH1201 39.6 1006 19.1 485 75 34.1 18.5 1.72
GSH1202 50.9 1293 19.1 485 93 42 37 3.44
GSH1203 62.1 1577 19.1 485 114 51.8 55.5 5.16
GSH1204 73.4 1864 19.1 485 132 59.7 64 5.95
GSH1601 39.6 1006 23.1 587 122 55.3 39.5 3.67
GSH1602 50.9 1293 23.1 587 145 65.7 79 7.34
GSH1603 62.1 1577 23.1 587 174 78.8 118.5 11.01
GSH1604 73.4 1864 23.1 587 197 89.2 158 14.68
AdapterStyleOR O-RingFG Flat
gasket
| 66 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Filter Housings for High Flow ApplicationsGraver High Flow Series filter housings are designed toaccept Graver and competitive High Flow Series largegeometry filter elements. Available in both vertical andhorizontal orientations, the High Flow housings canaccept from 1 to 7 filter elements. Also available is asingle round tipped horizontal design that allows easierremoval without the need for a platform and readily drainsfrom back of vessel to eliminate fluid spills.
Features–Benefits• Industrial grade housings available in 304, 316 and
carbon steel wetted parts• ASME U code available• Designs for 1, 3, 4 or 7 filters per housing for flows up
to 3500 GPM*• 150 psig designs• Accepts 20", 40" and 60" High Flow cartridges• Vertical and horizontal designs offered• Hold down plate prevents elements from unseating
due to back pressure• Filter removal tool available to facilitate element
changeout• Swing bolts on 150 psig design• Equipped with 1" vent and 2" drain (1" drain on
tipped horizontal style).
Product Specifications
Shell O-ring Buna N, Viton, EPDM, Silicone
Optional 300 psig (20.6 bar) Flanged Headdesigns available – Consult FactoryNot for use with compressed gases
Operating ParametersMaximum operating pressure:
Carbon Steel 150 psig (10.3 bar) @ 500°F (260°C) in liquid service
Stainless Steel 150 psig (10.3 bar) @ 300°F(149°C) in liquid serviceNot for use with compressed gases
Note:1. Flow capacity based on light dirt load and low
viscosity. Actual flow rate may be lower with vessel sizing based on fluid dirt loads, nature of contaminant, viscosity, micron rating and temperature.
Available Options• Vertical Housing Inlet/outlet
Side in/side out, Side in/bottom out• Horizontal Housing Inlet/Outlet
Side in/bottom out• Tilted Horizontal
Side in/side out, Side in/bottom out• Gauge ports• Hinged cover• Davit arm
Typical Applications
• Pre RO• Water• Desalination• Food and Beverage• Pulp and Paper• Oil and Gas• Petrochemicals
High Flow Series Filter Housings
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 67 |
Housings
Ho
usings
HFH Nomenclature Information
HFH 1 H 40 T 4 SS 150 -S -H
Example: HFH 1H40T4SS150-S-H
OptionsH HingeDA Davit arm
GasketB Buna-NS SiliconeE EPDMV Viton
Inlet/Outlet Size4, 6, 8, 12
Inlet/Outlet Config.SS Side in/side outSB Side in/bottom outPressure Rating150 150 psig300 150 psig (consult factory)
ModelHFH Series
# of Filters1 13 34 47 7
OrientationV VerticalH HorizontalHT Tipped Horizontal (1 round only)
Cartridge Height (inches)20, 40, 60
Material of ConstructionR 304L SS C Carbon SteelT 3016L SS
HFH Pressure Drop for various Pipe Sizes6
5
4
3
2
1
0
Pre
ssu
re D
rop
(p
sid
)
0 500 1000 1500 2000 2500 3000 3500
Flow Rate (GPM, Water)
4”
6”
8”
12”
HFH Dimensional Data - Horizontal/Swing Bolt
ModelRate FlowCapacity
GPM (LPM)
No. 10"Elements
FilterLengths
Dim. "A"inches (cm)
Dim. "B"inches (cm)
Dim. "C" 1inches (cm)
Dim. "D" 1inches (cm)
Dim. "E"inches (cm)
Dim. "F" 1inches (cm)
Max. Flangesize (in)
Drain Vent Gauge
HFH 3H-40 1050 (3975) 3 40 79 3⁄4" (203) 11 3⁄4" (30) 61 1⁄8" (155) 18" (46) 44" (112) 15" (38) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 4H-40 1400 (5300) 4 40 80 1⁄4" (204) 11 3⁄4" (30) 61 1⁄8" (155) 20" (51) 46" (117) 16" (41) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 7H-40 2450 (9275) 7 40 91 7⁄8" (233) 15 1⁄2" (39) 68" (173) 24" (61) 48" (122) 18" (46) 12 2" NPT 1" NPT 1⁄4" NPT
HFH 1H-60 500 (1893) 1 60 85" (216) 8" (20) 73" (185) 8 5⁄8" (22) 40" (102) 9" (23) 4 2" NPT 1" NPT 1⁄4" NPT
HFH 3H-60 1500 (5680) 3 60 99 3⁄4" (253) 11 3⁄4" (30) 81 1⁄8" (206) 18" (46) 44" (112) 15" (38) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 4H-60 2000 (7570) 4 60 100 1⁄4" (255) 11 3⁄4" (30) 81 1⁄8" (206) 20" (51) 46" (117) 16" (41) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 7H-60 3500 (13248) 7 60 111 7⁄8" (284) 15 1⁄2" (39) 88" (224) 24" (61) 48" (122) 18" (46) 12 2" NPT 1" NPT 1⁄4" NPT
Notes:1. Dimensions are based on the maximum connection
sizes.2. Dimensions include support legs.3. Dim. "A" will increase by approx. 3" for S.S. swing
bolt housings.
HFH Housing Dimensional Drawing
B C
A
DF
E
HorizontalSwing BoltDesign
| 68 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
HFH Dimensional Data - Vertical/Swing Bolt
ModelRate FlowCapacity
GPM (LPM)
No. 10"Elements
FilterLengths
Dim. "A"inches (cm)
Dim. "B"inches (cm)
Dim. "C" 1inches (cm)
Dim. "D" 1inches (cm)
Dim. "E"inches (cm)
Dim. "F" 1inches (cm)
Dim. "G"inches (cm)
Max. Flangesize (in)
Drain Vent Gauge
HFH 1V-20 175 (662) 1 20 51 7⁄8" (132) 48" (122) 40" (102) 28" (71) 12" (30) 8 5⁄8" (22) 18" (46) 4 2" NPT 1" NPT 1⁄4" NPT
HFH 3V-20 525 (1986) 3 20 63 5⁄8" (162) 56 3⁄4" (144) 45" (114) 28" (71) 12" (30) 18" (46) 30" (76) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 1V-40 350 (1325) 1 40 71 7⁄8" (183) 68" (173) 60" (152) 48" (122) 12" (30) 8 5⁄8" (22) 18" (46) 4 2" NPT 1" NPT 1⁄4" NPT
HFH 3V-40 1050 (3975) 3 40 83 5⁄8" (212) 76 3⁄4" (195) 65" (165) 48" (122) 12" (30) 18" (46) 30" (76) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 4V-40 1400 (5300) 4 40 84 1⁄8" (214) 76 3⁄4" (195) 65" (165) 48" (122) 12" (30) 20" (51) 32" (81) 8 2" NPT 1" NPT 1⁄4" NPT
HFH 7V-40 2450 (9275) 7 40 95 7⁄8" (244) 87 1⁄2" (222) 72" (183) 52" (132) 12" (30) 24" (61) 36" (91) 12 2" NPT 1" NPT 1⁄4" NPT
HFH Dimensional Data - Horizontal Tipped (Side in/Side out, Swing Bolt)
ModelRate FlowCapacity
GPM (LPM)
No. 10"Elements
FilterLengths
Dim. "A"inches (cm)
Dim. "B"inches (cm)
Dim. "C" inches (cm)
Dim. "D" inches (cm)
Dim. "E" 1inches (cm)
Max. Flangesize (in)
Drain Vent Gauge
HFH 1HT-20 175 (662) 1 20 18" (46) 23 1⁄2" (60) 8" (20) 16" (41) 40 1⁄2" (103) 4 1" NPT 1" NPT 1⁄4" NPT
HFH 1HT-40 350 (1325) 1 40 18" (46) 30 5⁄16" (77) 8" (20) 36" (91) 60 1⁄2" (154) 4 1" NPT 1" NPT 1⁄4" NPT
HFH 1HT-60 525 (1986) 1 60 18" (46) 37 1⁄8" (94) 8" (20) 56" (142) 80 1⁄2" (204) 4 1" NPT 1" NPT 1⁄4" NPT
Notes:1. Dimensions are based on the maximum connection
sizes.2. Dimensions include support legs.3. Dim. "A" will increase by approx. 3" for S.S. swing
bolt housings.
HFH Housing Dimensional Drawing
AB
E
F
C
D
OVERHEAD CLEARANCEEQUALS LENGTH OF ELEMENT
GVerticalSwing BoltDesign
Notes:1. Dim. "E" will increase by approx. 3" for S.S. swing
bolt housings.HFH Housing Dimensional Drawing
D
E
B
C
A
1-Around Tilted Horizontal Side in/Side outSwing Bolt Design
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 69 |
Housings
Ho
usings
HFH Dimensional Data - Horizontal Tipped (Side in/Bottom out, Swing Bolt)
ModelRate FlowCapacity
GPM (LPM)
No. 10"Elements
FilterLengths
Dim. "A"inches (cm)
Dim. "B"inches (cm)
Dim. "C" inches (cm)
Dim. "D" inches (cm)
Dim. "E" 1inches (cm)
Max. Flangesize (in)
Drain Vent Gauge
HFH 1HT-20 175 (662) 1 20 12" (30) 31 15⁄16" (81) 8" (20) 33 1⁄2" (85) 45 3⁄8" (115) 4 1" NPT 1" NPT 1⁄4" NPT
HFH 1HT-40 350 (1325) 1 40 12" (30) 38 3⁄4" (98) 8" (20) 53 1⁄2" (136) 65 3⁄8" (166) 4 1" NPT 1" NPT 1⁄4" NPT
HFH 1HT-60 525 (1986) 1 60 12" (30) 45 5⁄8" (116) 8" (20) 73 1⁄2" (187) 85 3⁄8" (217) 4 1" NPT 1" NPT 1⁄4" NPT
Notes:1. Dim. "E" will increase by approx. 3" for S.S. swing
bolt housings.HFH Housing Dimensional Drawing
E
A
B
C
D
1-Around Tilted Horizontal Side in/Bottom outSwing Bolt Design
| 70 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High-Purity Industrial HousingsThe IHP Series of industrial housings are engineered forfiltration applications involving chemical systems, high-purity water or critical process streams requiring high-purity output. These rugged vessels are constructedentirely of 316L stainless steel to optimize corrosionresistance. Design characteristics minimize hold-upvolumes, provide for easy draining and optimizedcleanability. Available as bottom open “T” style for 3 round– 7 round and top open “T” style for 12 and 21 round.
Features–Benefits• Constructed of 316L stainless steel wetted parts
Maximum corrosion resistance and purity• Unique bolt-down design
Simple, convenient and assures seal integrity• Easy draining
Tapered bottom permits complete draining• Available in three round to 21 round, from
10" to 40" high• Accommodates industry standard cartridge
configurations
Product Specifications
Materials: 316L Stainless Steel EPDM O-ring (other options available)
Filter connections: DOE, 226, 222
Closure: Opti–Clamp Bolt down
Surface Finish: External surfaces: Bead-blasted and passivatedInternal surfaces: Mill finish and passivated
DimensionsSizes: 3, 5, 6, 7, 12, 21 round
Filter Lengths: 10", 20", 30", 40"(25.4, 50.8, 76.2, 101.6 cm)
Operating ParametersMaximum operating pressure: 125 psi @ 200°F (8.6 bar @ 93°C)
Available Options• 150lb ANSI raised face flange• Multiple Triclamp/NPT Inlet/Outlet sizes• Electropolished
Typical Applications• High Purity Chemicals • Edible Oils• High Purity Water • Beverages
IHP™ Series Filter Housings
VENT
O-RING SEAL
HOLD DOWNPLATE WITHRODS & WINGNUTS
INLET
DRAIN
OUTLET
CARTRIDGECONNECTION
CARTRIDGEFILTERS
"C" REF
"E" OD
"D" R
EF
"B" R
EF
"A" R
EF
IHP Housing Dimensional Drawing
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 71 |
Housings
Ho
usings
IHP Housing Dimensional Data
IHP Housing Nomenclature Information
5IHP 3 -222 -NPT -NPT -2 -E -EP
Example: 5IHP 3-222-NPT-NPT-2-E-EP
OptionEP Electropolished
GasketS SiliconeE EPDMV VitonT Teflon encap. Viton
* Top open design
Model Vent/Drain Inlet/Outlet A B C D E
3IHP-1 1⁄2" Triclamp/NPT 2" Triclamp/NPT 18.25" 28.50" 13.50" 6.0" 6.6"
3IHP-2 1⁄2" Triclamp/NPT 2" Triclamp/NPT 28.35" 38.50" 13.50" 6.0" 6.6"
3IHP-3 1⁄2" Triclamp/NPT 2" Triclamp/NPT 38.25" 48.50" 13.50" 6.0" 6.6"
3IHP-4 1⁄2" Triclamp/NPT 2" Triclamp/NPT 48.25" 58.50" 13.50" 6.0" 6.6"
5IHP-1 1⁄2" Triclamp/NPT 2" Triclamp/NPT 18.25" 28.50" 13.0" 6.0" 8.62"
5IHP-2 1⁄2" Triclamp/NPT 2" Triclamp/NPT 28.35" 38.50" 13.0" 6.0" 8.62"
5IHP-3 1⁄2" Triclamp/NPT 2" Triclamp/NPT 38.25" 48.50" 13.0" 6.0" 8.62"
5IHP-4 1⁄2" Triclamp/NPT 2" Triclamp/NPT 48.25" 58.50" 13.0" 6.0" 8.62"
7IHP-1 1⁄2" Triclamp/NPT 2 or 3" Triclamp/NPT 19.50" 31.75" 18.13" 6.50" 10.0"
7IHP-2 1⁄2" Triclamp/NPT 2 or 3" Triclamp/NPT 29.50" 41.75" 18.13" 6.50" 10.0"
7IHP-3 1⁄2" Triclamp/NPT 2 or 3" Triclamp/NPT 39.50" 51.75" 18.13" 6.50" 10.0"
7IHP-4 1⁄2" Triclamp/NPT 2 or 3" Triclamp/NPT 49.50" 61.75" 18.13" 6.50" 10.0"
12IHP-1* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 21.50" 33.75" 19.75" 6.50" 12.75"
12IHP-2* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 31.50" 43.75" 19.75" 6.50" 12.75"
12IHP-3* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 41.50" 53.75" 19.75" 6.50" 12.75"
12IHP-4* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 51.50" 63.75" 19.75" 6.50" 12.75"
21IHP-1* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 20.50" 35.75" 25.0" 6.50" 18.0"
21IHP-2* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 30.50" 45.75" 25.0" 6.50" 18.0"
21IHP-3* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 40.50" 55.75" 25.0" 6.50" 18.0"
21IHP-4* 1⁄2" Triclamp/NPT 3 or 4" Triclamp/NPT 50.50" 65.75" 25.0" 6.50" 18.0"
Vent/DrainNPT, TC
Inlet/OutletNPT, TC, F
Inlet/Outlet Size2 2" 3 3" 4 4"
Model3IHP, 5IHP, 6IHP, 7IHP, 12IHP, 21IHP Series
Cartridge Height (10" lengths)1, 2, 3, 4
Cartridge ConnectionDOE, 222, 226
| 72 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High Quality Multi-Cartridge Filter HousingsLPF Series filter housings are constructed of durablestainless steel and meet general purpose industrial andcommercial filtration needs. All wetted welded surfacesare stainless steel. External surfaces are bead blasted fora consistent, easy care finish.
Features–Benefits• Durable 304L or 316L stainless steel wetted parts
for excellent corrosion resistance• Universal seat cups accept DOE or 222 style filters;
226 cups optional• Choice of V-band clamp or swing bolts for convenient
cartridge change outs• Eye nuts on swing bolt style facilitate removal with
minimal tools• Accepts 10", 20", 30", and 40" cartridges• Fully threaded tie rod allows for fitment of various
style/lengths of filters; wing nut for ease of removal• Removable cartridge posts for easy cleanouts• Suitable for flow rates from 21 to 588 GPM• Accommodates up to 2 3/4" OD cartridges• Equipped with 1/4" vent and 1/2" drain
Product Specifications
Materials: 304L or 316L Stainless Steel
Shell O-ring: Buna N, Viton, EPDM, Teflon encapsulated Viton
Internal Components: 316L compression plate and tie rod areincluded for use with single open endfilters.If double open end filters will beused, specify IP (internal parts) in thehousing description to obtain tube guidesand springs.
Operating ParametersMaximum operating 150 psig (10.3 bar) @ 200°F pressure: in liquid service
Not for use with compressed gases
Available Options• 150lb ANSI raised face flange• Various MNPT Inlet/Outlet sizes• Legs for maximum stability (standard for LPF 7 and up)• Mounting tabs (option for LPF 3 and LPF 5)• 226 configuration• Gauge ports• Hinge or davit arm optional on 21 around
Typical Applications• Potable water • Edible oils • Cutting oils• Process water • Lubricants • Solvents
• Coatings • Coolants
LPF Series Filter Housings
LPF Housing Dimensional Drawing
SwingBoltDesign
V-BandDesign
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 73 |
Housings
Ho
usings
LPF Housing Dimensional Data
LPF Housing Nomenclature Information
LPF 03 R 2 -N 2 -U -VB -E -G PX-T-IP
Example: 5IHP 3-222-NPT-NPT-2-E-EP
OptionT Tabs H Hinge L Legs GPX Gauge portGPG Gauge port
and gaugeIP Internal parts
(tube guides and springs)
DA Davit arm
GasketN Buna-NE EPDMV VitonT Teflon
NOTES:1 Dimensions are based on th standard connection sizes.2 Dimensions include support legs.
3 Flow capacity based on pleated filters rated at 7GPM per 10"equivalent. Actual flow rate is dependant upon cartridge type andapplication.
ModelRate FlowCapacity3
gpm (lpm)
No. 10"Elements
Dim. "A"inches (cm)
Dim. "B"inches (cm)
Dim. "C"inches (cm)
Dim. "D" 1inches (cm)
Dim. "E" 1inches (cm)
Std. Conn.size/type Drain Vent
LPF 03-1 21 (79) 3 20 7/8" (53) 7" (17.8) 3" (7.6) 9 1/2" (24.1) 10 5/8" (27) 1 1/2" MNPT 1/2" NPT 1/4" NPTLPF 03-2 42 (159) 6 30 7/8" (78.4) 7" (17.8) 3" (7.6) 9 1/2" (24.1) 10 5/8" (27) 1 1/2" MNPT 1/2" NPT 1/4" NPT
LPF 03-3 63 (238) 9 40 7/8" (12.4) 7" (17.8) 3" (7.6) 9 1/2" (24.1) 10 5/8" (27) 1 1/2" MNPT 1/2" NPT 1/4" NPT
LPF 03-4 84 (318) 12 50 7/8" (129.2) 7" (17.8) 3" (7.6) 9 1/2" (24.1) 10 5/8" (27) 1 1/2" MNPT 1/2" NPT 1/4" NPT
LPF 05-1 35 (132) 5 20 7/8" (53) 7" (17.8) 3" (7.6) 11 1/4" (28.6) 12 3/4" (32.4) 2" MNPT 1/2" NPT 1/4" NPT
LPF 05-2 70 (265) 10 30 7/8" (78.4) 7" (17.8) 3" (7.6) 11 1/4" (28.6) 12 3/4" (32.4) 2" MNPT 1/2" NPT 1/4" NPT
LPF 05-3 105 (398) 15 40 7/8" (12.4) 7" (17.8) 3" (7.6) 11 1/4" (28.6) 12 3/4" (32.4) 2" MNPT 1/2" NPT 1/4" NPT
LPF 05-4 140 (530) 20 50 7/8" (129.2) 7" (17.8) 3" (7.6) 11 1/4" (28.6) 12 3/4" (32.4) 2" MNPT 1/2" NPT 1/4" NPT
LPF 07-1 49 (185) 7 28 3/4" (73) 16" 2 (40.6) 9 3/4"2 (24.8) 13 1/2" (34.3) 14 3/4" (37.5) 2" MNPT 1/2" NPT 1/4" NPT
LPF 07-2 98 (371) 14 38 3/4" (98.4) 16" 2 (40.6) 9 3/4"2 (24.8) 13 1/2" (34.3) 14 3/4" (37.5) 2" MNPT 1/2" NPT 1/4" NPT
LPF 07-3 147 (557) 21 48 3/4" (123.8) 16" 2 (40.6) 9 3/4"2 (24.8) 13 1/2" (34.3) 14 3/4" (37.5) 2" MNPT 1/2" NPT 1/4" NPT
LPF 07-4 196 (742) 28 58 3/4" (149.2) 16" 2 (40.6) 9 3/4"2 (24.8) 13 1/2" (34.3) 14 3/4" (37.5) 2" MNPT 1/2" NPT 1/4" NPT
LPF 12-2 168 (636) 24 39 3/8" (97.5) 16" 2 (40.6) 9 3/4"2 (24.8) 17 1/4" (43.8) 17 1/4" (43.8) 3"-150# flange 1/2" NPT 1/4" NPT
LPF 12-3 252 (954) 36 49 3/8" (125.4) 16" 2 (40.6) 9 3/4"2 (24.8) 17 1/4" (43.8) 17 1/4" (43.8) 3"-150# flange 1/2" NPT 1/4" NPT
LPF 12-4 336 (1272) 48 59 3/8" (150.8) 16" 2 (40.6) 9 3/4"2 (24.8) 17 1/4" (43.8) 17 1/4" (43.8) 3"-150# flange 1/2" NPT 1/4" NPT
LPF 21-3 441 (1669) 63 49 3/8" (125.4) 16" 2 (40.6) 9 3/4"2 (24.8) 21 5/8" (54.9) 21 5/8" (54.9) 4"-150# flange 1/2" NPT 1/4" NPT
LPF 21-4 588 (2226) 84 59 3/8" (150.8) 16" 2 (40.6) 9 3/4"2 (24.8) 21 5/8" (54.9) 21 5/8" (54.9) 4"-150# flange 1/2" NPT 1/4" NPT
Inlet/Outlet Size1.5, 2, 3, 4
Seat Cup StyleU Universal (DOE or 222)X 226Closure TypeVB V-bandSB Swing bolts
ModelLPF Series
# of Filters03 3 around05 5 around07 7 around12 12 around21 21 around
Material of ConstructionR 304L SST 3016L SS
Cartridge Height (10" lengths)1, 2, 3, 4
Inlet/OutletN NPT F Flange
| 74 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High Quality Multi-Cartridge Filter HousingsThe MC Series filter housings are constructed of durablestainless steel and meet general purpose industrial andcommercial filtration needs. All wetted welded surfacesare stainless steel. External surfaces are sand blasted fora consistent, easy care finish.
Features–Benefits• Durable 304L or 316L stainless steel for corrosion
resistance• Shouldered seal plates provide a solid fit into the
cartridge core to ensure a positive cartridge seal• V-band clamp and swing bolts for quick and easy
cartridge changeouts• Accepts 10”, 20”, 30” and 40” DOE cartridges• Removable cartridge posts for easy cleanouts• Suitable for flow rates from 28 to 1456 gpm• Accommodates up to 2 3/4” OD cartridges
Product Specifications
Shell O-ringStandard: Buna NOptional: Viton, EPDM, Silicone
Construction:Head & Bottom Seat Plates: 316L stainless steel wetted parts Shell, Vent Plug, Drain Cap: 304L stainless steel wetted parts
Internal Components: 316L stainless steel compression seatplate assemblies and tube guides areincluded with the MC Series
Operating ParametersMaximum operating 150 psig (10.3 bar) @ 200°F pressure: in liquid service
Not for use with compressed gases
Available Options• 150lb ANSI raised face flange• Multiple MNPT or FNPT Inlet/Outlet sizes• Legs (standard for 7MC and up) • Mounting tabs (option for 4MC, 5MC)• 222/226 configuration• Gauge ports
Typical Applications• Potable water • Edible oils • Cutting oils• Process water • Lubricants • Solvents• Coatings • Coolants
MC ™ Series Filter Housings
ConnectionsSize Vent Drain Inlet/Outlet
4MC 1⁄4" (0.6 cm) NPT 1⁄2" (1.3 cm) NPT 11⁄2" (3.8 cm) NPT
5MC 1⁄4" (0.6 cm) NPT 1⁄2" (1.3 cm) NPT 2" (5.1 cm) NPT
7MC 1⁄4" (0.6 cm) NPT 1⁄2" (1.3 cm) NPT 2" (5.1 cm) NPT
12MC 1⁄4" (0.6 cm) NPT 1⁄2" (1.3 cm) NPT 3" (7.6 cm) Flange
22MC 1⁄4" (0.6 cm) NPT 1⁄2" (1.3 cm) NPT 4" (10.2 cm) Flange
36MC 1⁄4" (0.6 cm) NPT 3⁄4" (1.9 cm) NPT 6" (15.2 cm) Flange
52MC 1⁄4" (0.6 cm) NPT 3⁄4" (1.9 cm) NPT 6" (15.2 cm) Flange
MC Housing Dimensional Drawing
OUTLET
A
B
C
INLET
VENT1/4" NPT(PLUGGED)
DRAIN3/4" NPT(PLUGGED)
E
A
B
C
INLET OUTLET
VENT1/4" NPT(PLUGGED)
DRAIN3/4" NPT(PLUGGED)
Overhead Clearance equivalent to length of cartridge
D
V-BandDesign
Swing BoltDesign
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 75 |
Housings
Ho
usings
MC Housing Dimensional Data
MC Housing Nomenclature Information
22MC 3 -SB -304L -F 4 -BGasketB Buna-NE EPDMV VitonT Teflon
NOTES:1 36MC and 52MC Series Housings only available with SB closures.2 Flow capacity based on pleated filters rated at 7GPM per 10" equivalent. Actual flow rate is dependant upon cartridge type and application.3 Dimensions include support legs.4 Housing accepts a maximum of 2 5⁄8" cartridges.
ModelRated FlowCapacity2
gpm (lpm)
No. 10"Elements
Dim. "A"V-Band
inches (cm)
Dim. "A"Swing Boltinches (cm)
Dim. "B"inches (cm)
Dim. "C"inches (cm)
Dim. "D" inches (cm)
Dim. "E"inches (cm)
Shipping Weightlbs (kg)
4MC-1 28 (106) 4 20 7⁄8" (53.0) 22 1⁄4" (56.5) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 20 (9.1)4MC-2 56 (212) 8 30 7⁄8" (78.4) 32 1⁄4" (81.9) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 30 (13.6)4MC-3 84 (318) 12 40 7⁄8" (103.8) 42 1⁄4" (107.3) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 40 (18.1)4MC-4 112 (424) 16 50 7⁄8" (129.2) 52 1⁄4" (132.7) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 50 (22.7)5MC-1 35 (132) 5 20 7⁄8" (53.0) 22 1⁄4" (56.5) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 26 (11.8)5MC-2 70 (265) 10 30 7⁄8" (78.4) 32 1⁄4" (81.9) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 32 (14.5)5MC-3 105 (398) 15 40 7⁄8" (103.8) 42 1⁄4" (107.3) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 43 (19.5)5MC-4 140 (530) 20 50 7⁄8" (129.2) 52 1⁄4" (132.7) 7" (17.8) 3" (7.6) 10 1⁄2" (26.7) 12 1⁄2" (31.8) 48 (21.8)7MC-1 49 (185) 7 20 1⁄2" (52.1) 21 (53.3) 8 1⁄16" (20.5) 3 5⁄16" (8.4) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 44 (20.0)7MC-2 98 (371) 14 30 1⁄2" (77.5) 31 (78.7) 8 1⁄16" (20.5) 3 5⁄16" (8.4) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 53 (24.0)7MC-3 147 (557) 21 40 1⁄2" (102.9) 41 (104.1) 8 1⁄16" (20.5) 3 5⁄16" (8.4) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 70 (31.8)7MC-4 196 (742) 28 50 1⁄2" (128.3) 51 (129.5) 8 1⁄16" (20.5) 3 5⁄16" (8.4) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 91 (41.3)12MC-2 168 (636) 24 39 1⁄2" (100.3) 40 1⁄2" (102.9) 15 1⁄8" (38.4) 9 3⁄4" (24.8) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 86 (39.0)12MC-3 252 (954) 36 49 1⁄2" (125.7) 50 1⁄2" (128.3) 15 1⁄8" (38.4) 9 3⁄4" (24.8) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 92 (41.7)12MC-4 336 (1272) 48 59 1⁄2" (151.1) 60 1⁄2" (153.7) 15 1⁄8" (38.4) 9 3⁄4" (24.8) 12 1⁄2" (31.8) 14 1⁄2" (36.8) 100 (45.4)
22MC-33,4 462 (1749) 66 50 3⁄16" (127.5) 50 3⁄16" (127.5) 15 1⁄4" (38.7) 9 1⁄2" (24.1) 20 1⁄2" (52.1) 22 1⁄2" (57.2) 140 (63.5)22MC-43,4 616 (2332) 88 60 3⁄16" (152.9) 60 3⁄16" (152.9) 15 1⁄4" (38.7) 9 1⁄2" (24.1) 20 1⁄2" (52.1) 22 1⁄2" (57.2) 165 (74.8)36MC-33,4 756 (2861) 108 n/a 69 3⁄4" (177.2) 32 3⁄8" (82.2) 14 (35.6) n/a 25 7⁄8" (65.7) 340 (154.2)36MC-43,4 1008 (3816) 144 n/a 74 3⁄4" (189.9) 32 3⁄8" (82.2) 14 (35.6) n/a 25 7⁄8" (65.7) 360 (163.3)52MC-33,4 1092 (4134) 156 n/a 65 15⁄16" (167.5) 32 3⁄8" (82.2) 14 (35.6) n/a 29 7⁄8" (75.9) 520 (235.9)52MC-43,4 1456 (5512) 208 n/a 75 15⁄16" (192.9) 32 3⁄8" (82.2) 14 (35.6) n/a 29 7⁄8" (75.9) 550 (249.5)
Model4MC5MC7MC12MC22MC36MC1
52MC1
Inlet/OutletSize (inches)1.52346
Cartridge Height(10" lengths)1 10"2 20"3 30"4 40"
Closure TypeVB V-bandSB Swing bolts
Inlet/OutletN NPTF Flange
Material ofConstruction304L316L
Example: 22MC3-SB-304L-F4- B
| 76 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
Single Cartridge Filter HousingsThe SC Series of single cartridge metal filter housings areavailable in 304L or 316L stainless steel wetted parts witheither bolt or ring seal closure to service a wide range ofgeneral purpose filter applications. The SCR Ring ClosureSeries provide superior design features to serve higherpressure applications, allow full sump drainage and utilizea wider range of cartridge configurations. The SCB BoltClosure Series is an economical design for double openended cartridges.
Features–Benefits• Single shell construction for quick spill-free cartridge
replacement• In-line pipe connections for easy installation in 1/2, 3/4 and
1 inch pipe sizes• Drains built in • Rated for flow rates to 7 GPM (26.5 lpm) per 10 inch
filter cartridge length• Mounting brackets are available• Housing pressure drop is 0.6 psid at 7 gpm (.04 bar @
26.5 lpm)
SCR (with Ring Seal Closure)• Superior design accommodates most cartridges, higher
pressure and complete housing drainage• High pressure seal design supports pressures to 300
psi (20.7 bar) @ 200°F (93°C)• Center rod is eliminated to permit the use of double
open end or single open end cartridges
• Tapered housing bottom permits complete drainage
• Model available for 222 and 226 O-ring style cartridge inall 316L stainless steel wetted parts
SCB (with Bolt Closure)• Economical design accommodates DOE cartridges• Optional T-handle available for sump removal• Temperature rated to 250°F (121°C) and 250 psi (17.23
bar) maximum pressure
Typical Applications• Process water • Coolants• Potable liquids • Hydraulic oils• Petro chemicals • Solvents
SC™ Series Filter Housings
SCR Ring Closure Housing
SCB Bolt Closure Housing
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 77 |
Housings
Ho
usings
SC Housing Dimensional Drawing
OUTLET
CENTER ROD
PETCOCK DRAIN
SPRING
SHELL
CAP NUT
GASKET
CARTRIDGE
CARTRIDGESEAL PLATE
HEAD
INLET
VENTS (OPTIONAL)
C
A
D
SCB
1/8'' DRAIN
HEAD
RING
OUTLET
SHELL
CARTRIDGE
BOTTOMSEAL PLATE
GASKET
CARTRIDGESUPPORT
CARTRIDGECENTERINGDEVICE
INLET
A
C
D
B
SCR
SC Housing Dimensional Data
SC Housing Nomenclature Information
SCR 10 BSS 075 DOE -E
Example: SCR 10BSS075DOE-E 1 Not available in SCR. 2 Available as 316L only.
LegendSCB Single Cartridge (with Bolt Closure)SCR Single Cartridge (with Ring Closure)304L 304L Sump, 316L Head316L 316L Sump & HeadBSS Brass Head, 304L Sump
GasketB Buna-NS SiliconeE EPRV VitonT Teflon
Model Ainches (cm)
Binches (cm)
Cinches (cm)
Dinches (cm)
SCB-04 4" (10.2) n/a 8 7⁄8" (22.6) 6" (15.2)SCB-09 4" (10.2) n/a 13 3⁄4" (34.9) 11" (27.9)SCB-10 4" (10.2) n/a 13 3⁄4" (34.9) 11" (27.9)SCB-20 4" (10.2) n/a 23 7⁄8" (60.6) 21" (53.3) SCB-30 4" (10.2) n/a 33 7⁄8" (86.0) 31" (78.7)SCR-09 4 1⁄2" (11.4) 3 5⁄16" (8.4) 13 1⁄8" (33.3) 11 3⁄8" (28.9)SCR-10 4 1⁄2" (11.4) 3 7⁄16" (8.7) 13 1⁄4" (33.7) 11 1⁄2" (29.2)SCR-20 4 1⁄2" (11.4) 3 7⁄16" (8.7) 23 1⁄4" (59.1) 21 1⁄2" (54.6)SCR-30 4 1⁄2" (11.4) 3 7⁄16" (8.7) 33 1⁄4" (84.5) 31 1⁄2" (80.0)
SCR-10-222/226 4 1⁄2" (11.4) 3 7⁄16" (8.7) 18" (45.7) 16 1⁄4" (41.8)SCR-20-222/226 4 1⁄2" (11.4) 3 7⁄16" (8.7) 28" (71.1) 26 1⁄4" (66.7)SCR-3 0-222/226 4 1⁄2" (11.4) 3 7⁄16" (8.7) 18" (96.5) 36 1⁄4" (92.1)
SC Housing SpecificationsModel Cartridge Length
inches (cm)Rated Capacity
GPM (LPM)Shipping Weight
lbs (kg)Cartridge Endcap
TypeMaximum Pressure
PSIG (bar)Maximum Temp.
˚F (˚C)SCB-04 4 7⁄8" (12.4) 3.5 (13.3) 4 (1.8) DOE 250 (17.2) 250 (121.1)SCB-09 9 3⁄4" (24.8) 7 (26.5) 7 (3.2) DOE 250 (17.2) 250 (121.1)SCB-10 10" (25.4) 7 (26.5) 7 (3.2) DOE 250 (17.2) 250 (121.1)SCB-20 20" (50.8) 14 (53.0) 10 (4.5) DOE 250 (17.2) 250 (121.1) SCB-30 30" (76.2) 21 (79.5) 12 (5.4) DOE 250 (17.2) 250 (121.1) SCR-09 9 3⁄4" (24.8) 7 (26.5) 7 (3.2) SOE or DOE 300 (20.7) 200 (93.3)SCR-10 10" (25.4) 7 (26.5) 7 (3.2) SOE or DOE 300 (20.7) 200 (93.3)SCR-20 20" (50.8) 14 (53.0) 10 (4.5) SOE or DOE 300 (20.7) 200 (93.3)SCR-30 30" (76.2) 21 (79.5) 12 (5.4) SOE or DOE 300 (20.7) 200 (93.3)
Inlet/Outlet Size050 0.50" 075 0.75" 100 1.00"
ConnectorDOE, 2222, 2262
ModelSCB, SCR
Cartridge Height (10" lengths)04 4 7⁄8" 10 10" 30 30"09 9 3⁄4" 20 20"
Material ofConstructionBSS304L1
316L
| 78 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
High-Purity Sanitary HousingsThe SHP Series of sanitary housings are engineered using3A sanitary standards for filtration applications involvingultrapure chemical systems, ultrapure water or criticalprocess streams requiring sanitary production stream.These rugged vessels are constructed entirely of 316Lstainless steel to optimize corrosion resistance. Designcharacteristics minimize hold-up volumes, provide foreasy draining and optimized cleanability. Available as “T” style or inline (one round only).
Features–Benefits• Constructed of 316L stainless steel wetted parts
Maximum corrosion resistance and purity• Meets 3A Sanitary Design Standards• Unique bolt-down design on multi-round
Simple, convenient and assures seal integrity• Easy draining
Tapered bottom permits complete draining• Available in one round to 7 round, from 10" to 40" high• Accommodates industry standard 222 and 226
cartridge configurations
Product Specifications
Materials: 316L Stainless Steel wetted partsEPDM O-ring (other options available)
Filter connections: 226, 222
Closure: 304 SS Clamp (1 round only)Opti–Clamp Bolt down
Surface Finish: External surfaces: 20 RA, ElectropolishedInternal surfaces: 20 RA, Electropolished
DimensionsSizes: 1, 3, 5, 7 Round
Filter Lengths: 10", 20", 30", 40"(25.4, 50.8, 76.2, 101.6 cm)
Operating ParametersMaximum operating pressure: 125 psi @ 200°F (8.6 bar @ 93°C)
Typical Applications• Ultrapure Chemicals • Wine/Beer • Diagnostics• Ultrapure Water• Vaccines
SHP™ Series Filter Housings
OUTLET
O-RING SEALS
INLET
(2) DRAINS
CARTRIDGEFILTERS
1-1/2'' TRICLAMPNOZZLE w-1/2''TRICLAMP SIDEOUTLET
"E" OD
"D"
RE
F"B
" R
EF"A
" R
EF
222 CODE 8OR 226 CODE 7MACHINEDSEPARATOR PL
"C" REF
SHP Housing Dimensional Drawing
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 79 |
Housings
Ho
usings
SHP Housing Dimensional Data
SHP Housing Nomenclature Information
5SHP 3 -222 -T C -TC -2 -E -EP
Example: 5ISHP 3-222-TC-TC-2-E-EP
EP Electropolished GasketS SiliconeE EPDMV VitonT Teflon encap. Viton
* Top open design
Model Vent/Drain Inlet/Outlet A B C D E
1SHP-1* 1⁄2" Triclamp/1.4" 1.0" Triclamp 13.75" 22.0" 9.75" 6.0" 4.0"
1SHP-2* 1⁄2" Triclamp/1.4" 1.0" Triclamp 23.75" 32.0" 9.75" 6.0" 4.0"
1SHP-3* 1⁄2" Triclamp/1.4" 1.0" Triclamp 33.75" 42.0" 9.75" 6.0" 4.0"
1SHP-L1* 1⁄2" Triclamp/1.4" 1.5" Triclamp 13.75" 19.5" NA NA 4.0"
1SHP-L2* 1⁄2" Triclamp/1.4" 1.5" Triclamp 23.75" 29.5" NA NA 4.0"
1SHP-L3* 1⁄2" Triclamp/1.4" 1.5" Triclamp 33.75" 39.5" NA NA 4.0"
3SHP-1 1⁄2" Triclamp/1.4" 2" Triclamp 15.90" 28.50" 13.55" 6.0" 6.6"
3SHP-2 1⁄2" Triclamp/1.4" 2" Triclamp 25.90" 38.50" 13.55" 6.0" 6.6"
3SHP-3 1⁄2" Triclamp/1.4" 2" Triclamp 35.90" 48.50" 13.55" 6.0" 6.6"
3SHP-4 1⁄2" Triclamp/1.4" 2" Triclamp 45.90" 58.50" 13.55" 6.0" 6.6"
5SHP-1 1⁄2" Triclamp/1.4" 2" Triclamp 15.65" 28.25" 14.38" 6.0" 10.75"
5SHP-2 1⁄2" Triclamp/1.4" 2" Triclamp 25.65" 38.25" 14.38" 6.0" 10.75"
5SHP-3 1⁄2" Triclamp/1.4" 2" Triclamp 35.65" 48.25" 14.38" 6.0" 10.75"
5SHP-4 1⁄2" Triclamp/1.4" 2" Triclamp 45.65" 58.25" 14.38" 6.0" 10.75"
7SHP-1 1⁄2" Triclamp/1.4" 2" Triclamp 15.65" 28.25" 14.38" 6.0" 10.75"
7SHP-2 1⁄2" Triclamp/1.4" 2" Triclamp 25.65" 38.25" 14.38" 6.0" 10.75"
7SHP-3 1⁄2" Triclamp/1.4" 2" Triclamp 35.65" 48.25" 14.38" 6.0" 10.75"
7SHP-4 1⁄2" Triclamp/1.4" 2" Triclamp 45.65" 58.25" 14.38" 6.0" 10.75"
Vent/DrainTC Triclamp
Inlet/OutletTC Triclamp
Inlet/Outlet Size1 1" 1.5 1.5" 2 2"
Model1SHP, 1SHP-L Inline, 3SHP, 5SHP, 7SHP Series
Cartridge Height (10" lengths)1, 2, 3, 4
Cartridge Connection222, 226
| 80 | www.gravertech.com
Fi ltrat ion | Separation | Purif ication
1. Quotations. Unless otherwise specified in writing,quotations are valid for 30 days. Prices quoted do notinclude any sales, use, excise, occupational or other tax orfreight unless otherwise specified. Pricing is based upon thequantity and type specified and subject to revision wheninterruptions, engineering changes, or changes in quantityare caused or requested by the Buyer.
2. Scope. Seller intends to provide the goods and servicesrequested by Buyer.
3. Acceptance. All orders are subject to approval and writtenacceptance by an authorized representative of Seller. Noproduct may be returned without Seller’s prior writtenapproval. Any change requires written consent and mayresult in a change in price, delivery, payment, orperformance warranties. A restocking charge, at Seller’sdiscretion, may be applied against material returned forcredit.
4. Delivery/Force Majeure. Delivery lead times areapproximate and based on receipt of timely and accurateinformation from Buyer. Seller reserves the right to makepartial shipment and invoice therefor. Seller assumes noliabilities for delays or non-performance resulting from, butnot limited to, Acts of God, fire, explosion, flood, war,terrorism or threats of terrorism, act of or as authorized byany government, accident, labor trouble or shortage, inabilityto obtain equipment, material, transportation, acts of Buyeror any acts beyond the control of Seller. Delivery to carriershall constitute delivery to Buyer and all risk of loss ordamage in transit shall be borne by Buyer. If, because ofBuyer’s inability to take delivery, the products are notshipped or returned, Seller may have them stored for Buyerat Buyer’s expense, risk, and account, and for all otherpurposes they shall be considered “shipped”. Buyer shallunload, handle, store and install the products in accordancewith generally accepted practice or specific instructionsprovided for the equipment, membranes and/or media.
5. Packaging. All items sold hereunder shall be packed orcrated and shipped in accordance with Seller’sspecifications. Any special packing, crating, shipping orunloading requirements of Buyer must be agreed upon bySeller in advance at additional cost. Weights listed, if any, areapproximate.
6. Inspection. Buyer shall inspect goods upon arrival and shallgive written notice of any damage or shortage to Seller andcarrier within 10 days. Failure to give such written notice ofany damage or shortage will constitute satisfactory shipmentby Seller and irrevocable acceptance by Buyer of all itemslisted as contained. Claims for shipping damage should bemade directly to the carrier by the Buyer.
7. Repairs and Alterations. Any repairs or alterations madeto goods shall void all warranties and be at the expense ofBuyer unless specifically authorized in writing by Seller. In noevent shall Seller accept back charges for unauthorizedrepairs or alterations.
8. Limited Warranty. Unless explicitly stated in writing signedby Seller, Seller warrants its products against defects inworkmanship and material at the time of shipment from thefactory. Specifications provided by Seller are guidelines onlyand the particular use and application will determine theactual life of the product, media or membrane. Seller’sliability under this warranty shall be limited to thereplacement or repair, at Seller’s sole discretion, F.O.B.factory, of any defective product which having been returnedto the factory, transportation charges prepaid, has beeninspected and determined by Seller to be defective. Thewarranty on component parts not manufactured by Seller islimited to that of the manufacturer thereof, if any. Theforegoing warranties do not cover reimbursement for labor,transportation, removal, installation, or other expenseswhich may be incurred in connection with replacement orrepair.
THE FOREGOING WARRANTIES ARE BUYER’SEXCLUSIVE REMEDY AND IN LIEU OF ALL OTHEREXPRESS AND IMPLIED WARRANTIES, INCLUDING BUTNOT LIMITED TO, THE IMPLIED WARRANTIES OFMERCHANTABILITY, FITNESS FOR A PARTICULARPURPOSE, COURSE OF DEALING AND USAGE OFTRADE.
9. Limitation Of Liability. Under no circumstances shall Sellerbe liable to Buyer or any other person or entity for incidental,consequential, direct, exemplary, punitive or specialdamages or any other losses or expenses, including withoutlimitation, for injuries to persons or damage to property, lossof profit or revenues, cost of substitute products, loss of use,downtime costs, or claims of Buyer’s customers even ifSeller has been advised of the possibility of such damages.Seller’s aggregate liability arising out of or relating to anyproducts purchased shall not exceed the purchase priceactually received by Seller for the allegedly defectiveproducts.
10. Disposal. Buyer shall be responsible and fully liable for thedisposal of any product, including, without limitation, spentproduct or material, and shall perform such disposal incompliance with all federal, state and local laws andregulations relating thereto.
11. Service. Upon reasonable request, Seller may makeavailable to Buyer the services of a trained representative atSeller’s then current prevailing rates, plus travel, living andout of pocket expenses. In no event shall charges fortechnical direction of field installation and/or start-up beconsidered as included in the quoted price unless otherwiseexpressly stated in writing by Seller.
Terms & Conditions of Sale
ACCEPTANCE BY GRAVER TECHNOLOGIES LLC (“Seller”) OF ANY OFFER OR PURPORTED OFFER ISEXPRESSLY MADE CONDITIONAL TO THE ASSENT OF THESE TERMS AND CONDITIONS OF SALE (these “Terms”). SELLER REJECTS ANY PRIOR OFFERS MADE BY BUYER WITH REGARD TO THE PRODUCTS.
Customer Service: 888-353-0303 International Customer Service : 302-731-1700 | 81 |
12. Indemnity. Buyer shall defend, indemnify and hold Seller, itsagents and employees harmless from and against all suits(including reasonable attorneys’ fees), including death orinjury, arising out of or relating to Buyer’s (i) providedspecifications, structure, operation, material, or method ofmaking products, including, without limitation, any resultingviolation of intellectual or proprietary rights, (ii) use, misuse ordisposal of products or materials, and (iii) breach of theseTerms and Conditions by Buyer.
13. Payment Terms. All payments are due at location stated oninvoice. Custom products require progress payments asdesignated by Seller. All other products are net cash within30 days of shipment unless otherwise expressly stated inwriting by Seller. Seller reserves the right to modify itspayment terms at any time. Invoices not paid when due aresubject to a late payment service charge of the lesser of1-1/2% (one and one half percent) per month or themaximum legal service charge permitted under the law. IfBuyer fails to make any payment when due, Buyer shall beliable for all expenses related to collection of past dueamounts, including, without limitation, attorneys’ fees andcosts.
14. Cancellation. Custom orders may not be cancelled orreturned. Cancellation of standard in-stock products aresubject to a 25% restocking fee.
15. Compliance. The products furnished herein may notcomply with all Federal, State, and local laws, regulations orordinances unless expressly agreed to in writing. Allshipments hereunder are subject to the export control lawsand regulations of the United States and any amendmentsthereto. Buyer agrees that it shall not make any dispositionof U.S. origin Products purchased from Seller, by way oftransshipment, re-export, diversion or otherwise, other thanin and to the country of ultimate destination on Seller’sinvoices except as said laws and regulations may expresslypermit.
16. Typographical Errors. Seller is not responsible fortypographical errors made in any of its publications or forclerical errors made in preparation of quotations, salesorders or acknowledgments. All such errors are subject tocorrection.
17. Applicable Law. The laws of the State of Delaware shallgovern these Terms and Conditions and the courts ofDelaware shall be the exclusive venue and jurisdiction.
18. Arbitration. In case of any controversy, claims, or disputesarising out of or relating to these Terms and Conditions orthe breach hereof, the parties shall meet to attempt tonegotiate an amicable settlement. In the event the parties failto reach an amicable settlement, Buyer hereby agrees thatSeller may, at Seller’s sole option, require Buyer to arbitrateany controversy, claim or dispute arising out of or relating tothese Terms and Conditions or any other issue. If Sellerchooses arbitration, such arbitration shall be conducted inthe English language, and shall take place in Wilmington,Delaware. The arbitration tribunal shall be composed ofthree arbitrators appointed pursuant to the procedures setforth in the rules of the American Arbitration Association.Judgment may be entered on the award by any court havingjurisdiction. Neither party shall have the right of discoveryduring the arbitration process.
19. Governance. Buyer and Seller each agree that these termsand conditions shall govern and control with respect to allorders by Buyer from Seller, and no term, condition,warranty or representation appearing in any purchase orderof Buyer or order acknowledgment, invoice or other salesdocumentation of Buyer, will govern unless agreed to inwriting by Seller.
20. Nondisclosure. Neither party hereto shall disclose anyinformation regarding any the subject matter hereof orproprietary technical information received from the otherparty, except to the extent that disclosure is required by lawor is otherwise agreed to in writing by the parties.
21. Severability. In the event that any provision herein shall befound to be void or unenforceable, this shall not beconstrued to render any other provisions void orunenforceable, and all other provisions shall remain in fullforce and effect unless the provisions which are invalid orunenforceable shall substantially affect the rights orobligations granted to or undertaken by the Parties.
22. Notices. All notices to Seller shall be given in writing and willbe deemed effective on the third day after mailing if sent bycertified mail, postage prepaid, return receipt requested, oron the day after deposit if sent by overnight delivery servicewhich maintains records of the time, place and receipt ofdelivery.
23. Changes. Any changes or revisions to these terms andconditions must be authorized in writing by Seller’s Presidentor Vice-President of Finance.
24. Entirety. These terms and conditions together with theexhibits referenced and attached hereto embodies the entireunderstanding between Buyer and Seller and there are noagreements, understandings, conditions, warranties, orrepresentations, oral or written, express or implied, withreference to the subject matter hereof which are not mergedherein.
Rev. 08/2013
Terms & Condit ions
Graver Technologies Liquid Process Filter Groupprovides products and services that meetstringent application requirements in a variety ofmarkets, including Process Water, Food &Beverage, Pharmaceutical, Microelectronics andChemicals.
MAR K ETS PROCESS WATER
F
OO
D &
BEV
ERAGE
PHARMACEUTIC
AL
M
ICR
OEL
ECTRONICS
CHEMICAL
Graver Technologies Liquid Process Filter Groupprovides products and services that meet stringentapplication requirements in a variety of markets,including Process Water, Food & Beverage,Pharmaceutical, Microelectronics and Chemicals.
Fi ltrat ion | Separation | Purif ication
Made with P ride in the USA
Corporate Headquarters200 Lake DriveGlasgow, Delaware 19702 U.S.A.Telephone: 302-731-1700Fax: 302-731-1 707E-Mail: [email protected]: www.gravertech.com
Customer ServiceToll-free (in U.S.): 888-353-0303Outside US: 302-731-3568Technical Support: 1-888-353-0303E-mail: [email protected] Technologies Europe (UK): +44-1424-777791Graver Technologies China: +86-21-5238-6576
© 2013 Graver Technologies LLC.
Superior Products & Global ReachWhether your business is around the corner or aroundthe world, Graver Technologies can support you withsuperior products and services. Our ion exchange,adsorbent, filtration, and membrane products deliverexceptional performance in some of the harshestprocess environments in North America, Europe, Asia,the Pacific Rim, South America, and Africa.
Graver Technologies is a member of The MarmonGroup (a Berkshire Hathaway Company), aninternational group with more than $7 billion in annualsales. Around the corner or around the world, GraverTechnologies is a fast growing company with thetechnical resources and financial strength that make usthe perfect partner for your business.