greater n edford vo te h institute · program to help answer the need for qualified assistants in...
TRANSCRIPT
GREATER NEW BEDFORD
VOC-TECH INSTITUTE
NEW Post-Secondary Program in Marine Trades
License Certifications
Career Training
Enrichment Courses
… and much, much more
Spring
or call 508-998-3321 Ext. 195
to make arrangements
to register in person.
Onsite Registration:
Mar 9th & 10th 5:00pm - 8:00pm
http://www.gnbvt.edu/VTI
Register Online TODAY!
Greater New Bedford Vocational Technical Institute | 1121 Ashley Boulevard, New Bedford, MA 02745
Rick Quintin | (508) 998-3321 ext. 195 | [email protected] | http://www.gnbvt.edu/vti
Preparation
Passion
Perseverance
2
There is absolutely NO SMOKING anywhere on campus.
Parking is allowed in the main parking lots or designated shop areas. Automobiles which are illegally parked will be tagged and brought to the attention of the police.
When GNB Voc-Tech day school has been cancelled for inclement weather, evening school classes ARE NOT automatically cancelled. A separate decision will be made and announced. Check the Website at www.gnbvt.edu/vti or check us out on Facebook for snow cancellations. You may also call the school at 508 -998-3321 ext. 195 or listen to radio stations WBSM, WNBH, or WSAR for further information. Make-up classes will be scheduled at the discretion of the Institute Director.
At the conclusion of each non -license class, students will be given a certificate in their respective programs if they have attended 75% of the required class.
It is a school policy that no one is allowed into the building or any of the classrooms at any time unless they are a GNBVTI stu-dent.
C.E.U.’s and P.D.P.’s are available upon request for some courses.
Course instructors are subject to change.
Students may now register online through www.gnbvt.edu/vti and pay with a credit or debit card.
Registration is open to all, regardless of where they reside.
District price is for the residents of Dartmouth, Fairhaven & New Bedford. PROOF OF RESIDENCY REQUIRED
Classes operate on a Trimester System. Classes generally run for 8 weeks from 6:30- 9:30 p.m. Monday through Thursday un-less otherwise stated.
Tuition will be returned if it is impossible to conduct a course or the student decides to drop out of a planned course before it begins.
Senior Citizens (60 or over) will receive a $10.00 discount for all 8 week classes and a $5.00 discount for 4 week classes.
Qualified individuals with disabilities seeking reasonable accommodations are requested to contact the Institute Director at the time of registration.
Students must be 18 or older and not currently a high school student to take a course or be in the classroom during instruction.
Make checks payable to: G N B V T I
Due to scheduling constraints, make-up classes and specific class dates may be
scheduled to a different evening at the discretion of the Instructor. Days missed due
to inclement weather will be made up if possible.
Registration Information General Information
Payments accepted by cash, check, Visa, MasterCard and AMEX
3
Registered Training Provider through the Department of Career Services Chapter 74 Approved Vocational Technical Programs New England Association of Schools and Colleges (NEASC) Approved School by the MA Board of Building Regulations and Standards Approved School by the MA State Board of Electrical Examiners Approved School by Commonwealth of MA Division Professional Licensure for
Plumbers & Gas Fitters Approved training courses by the MA Division of Employment and Training and
MA Rehabilitation Commission, US Department of Veteran Affairs Approved School by Commonwealth of MA Steam Engineering License Renewal
Provider Approved School by Commonwealth of MA - for Continuing Education for Build-
ing Official Certification Approved OSHA Training Facility Member of Massachusetts Restaurant Association for NRA ServSafe Certification Approved Program for EPA—Section 608 Certification and Universal R -410A Approved testing site of the ASPT (Certified EKG Technician Exam)
NON-DISCRIMINATION POLICY
The school does not discriminate on the basis of race, color, national origin, sex, dis-ability, religion, sexual orientation, gender identity, age, homelessness, or immigra-tion or veteran status in its education programs and activities, including admission to or employment in such programs or activities. Inquiries concerning the application of Title IX and its implementing regulations may be referred to the Title IX coordinators or the U.S. Department of Ed. Office for Civil Rights.
SUGGESTION BOX
GNB Voc-Tech VTI is looking to improve and expand. Please leave any suggestions you may have to improve the program or increase course offerings. Let us know if you are interested in teaching a class or simply have a recommendation for one. Feel free to call 508-998-3321 ext. 195 or e-mail us at [email protected]. ______________________________________________________________
______________________________________________________________
______________________________________________________________
Name (optional): _________________________ Phone: ________________
Accreditation Standards
Check us out at www.gnbvt.edu/vti
and follow us on Facebook @GNBVTI
4
MARINE TRADES ................................ ........... 5
LICENSE TRADES
Electrical ................................ ...................... 6 Plumbing ................................ ...................... 6 Steam Engineering ................................ ........ 7 Medical ........................................................ 7 Carpentry ................................ ..................... 8
NON-LICENSE TRADES
Carpentry ................................ ...................8-9 Computers ................................ ................... 10 Auto ................................ ............................ 11 Machine Shop ................................ .............. 11 Welding ................................ ....................... 12
ENRICHMENT
Languages ................................ ................... 13 Special Interests ................................ .......... 13 Art ................................ .............................. 13 Clothing ................................ ....................... 14 Floral/Gardening ................................ .......... 14 Food ................................ ........................... 15 Health ................................ ......................... 15
New classes and updates may be added before registration. Please check our website at www.gnbvt.edu/vti
5
Marine Technology
Marine Electronic Systems and Maintenance and Lab
Marine Boat Building, Repair
Trailer Maintenance
Inboard and Stern Drive Maintenance
Rigging and Predelivery Inspection
Customer Service and ABYC Advisor Standards
Instructor: John Bernier
Post-Secondary Certificate Program
Limited Seats
Available
Marine Technology
Fundamentals of Marine Technology
Marine Engine Theory and Maintenance and Lab
Marine Boat Handling and Shop Safety
Instructor: John Bernier
Marine Technology
Marine Electrical System Theory and Maintenance and Lab
Marine Plumbing and Welding and Lab
Instructor: John Bernier
3 Trimesters
5
CALL TODAY!
6
Industrial/Municipal Wastewater Training
Instructor: Vinny Furtado
PL-07
IAPMO MA Licensed Plumbers & Gas Fitters Session #12 License Renewal Course PL-07A - Gas Fitters (3 Hours) Price: $60.00*
PL-07B - Plumbers (6 Hours) Price: $100.00*
PL-01, PL-02, PL-03, PL-04, PL-05
Plumbing Apprenticeship Program
(10 weeks in the Fall and 10 Weeks in the Winter)
Night: Tuesday & Thursday 6:00 - 9:30 pm
Instructors: Scott Thibault & Manny Pereira
248 CMR Tier Program for Licensure of Plumbers
Course consists of 110 class hours along with a final exam.
Tier 1 through Tier 5
All students should bring in their own updated code books.
PL-01, PL-02, PL-03, PL-04, and PL-05 will run for 20 weeks
District Price: $750.00 Non-District: $850.00
Electrical
License Trades
Basic Electricity for the Homeowner Instructor: Keith Kearney
The purpose of this course is to provide the student with an
understanding of basic home wiring. Discussed are areas
such as electrical terminology, wire size, splicing, light boxes,
switches and receptacles.
MCE MA Electrical License Renewal Instructor: Dave Bigos
Dates: TBD
JOURNEYMAN/MASTER ELECTRICIAN AND SYSTEM TECH/ SYSTEM CONTRACTOR PREPARATION FOR LICENSE
These courses consist of Two Semesters - Fall & Winter - 28 Weeks
Course Hours Course Hours
EL-J-1A 0-75 HOURS EL-J-1B 75-150 HOURS
EL-J-2A 150-225 HOURS EL-J-2B 225-300 HOURS
EL-J-3A 300-375 HOURS EL-J-3B 375-450 HOURS
EL-J-4A 450-525 HOURS EL-J-4B 525-600 HOURS
EL-M-A 0-75 HOURS EL-M-B 75-150 HOURS
Students will be given 84 hours of instruction per semester and must complete 75 hours and receive a passing grade for credit. Students will be placed in class sections based on total classroom hours completed and approved by the Commonwealth.
District Price: $495.00 Non-District: $595.00
Nights: Tuesday and Thursday Code Books required.
Fall 2020 Part 1 (14 weeks ) Winter 2021 Part 2 (14 weeks)
Mass Electrical Exam Test Prep Instructor: George Sylvia
Dates: TBD
Plumbing
7
(FALL 2020)
Instructor: Kimberly Scieska
This course will prepare participants for employment within both the clinical and retail pharmacy practice. Focus will be placed on medical terminology, pharmaceutical calculations,
inventory systems and regulations affecting pharmacy practice.
Upon completion of this course, students will be prepared to sit for the PTCB (Pharmacy Technician Certification Board) exam which would provide them with a CPhT (Certified Pharmacy
Technician) license.
OA-01 Night: Monday
OPHTHALMIC ASSISTANT Instructor: Tracy Oliver
Learn to do eye exams!
The Ophthalmic Medical Assistant Program is a certificate program to help answer the need for qualified assistants in ophthalmology practices. This program is designed to teach the basic skills needed to perform eye exams and prepare the
patient for the ophthalmologist.
CPR-01 Night: Monday & Wednesday
CPR (Heartsaver CPR/AED) Instructor: Erin Marcotte
No medical training required. You need to complete a written exam
and pass to earn your completion card.
The cost includes a $22.00 fee for the CPR AED Certification Card.
License Trades
6-Hour Steam License Renewal
Instructors: Manny Oliveira & James Koska
Individuals licensed to operate boilers under a special license
shall demonstrate completion of 6 hours of continuing educa-
tion at or through an institution or organization approved by
the commissioner, in consultation with the chief inspector,
during each 5-year period proceeding each license renewal.
MA State 3rd Class Engineer’s License Prep
Instructor: James Koska
Covers the joints, valve settings of pumps and simple engines, turbines, and condensers.
Mandatory License Renewal - 30 hours
Instructor: Manny Oliveira & James Koska
All individuals licensed to operate boilers shall demonstrate
the completion of 30 hours of continuing education before
each license renewal.
Steam Engineering
EKG-01 Night: Monday
(FALL 2020)
EKG TECHNICIAN
EMT-01 Night: Tuesdays, Thursdays & Saturdays
(FALL 2020)
EMT—EMERGENCY MEDICAL TECHNICIAN
District Price: $1,100 Non -District: $1,200
Medical
8
License Trades
Woodcarving Instructor: Michael Weydt
Non-License Trades
Massachusetts Building Code Instructor: William Horrocks
CP-12A & CP-12B Night: Tuesday
12-Hour MA Construction Supervisors
License Renewal Instructor: William Horrocks CP-12A will run the first four Tuesdays. (Mar. 31 - Apr. 28) 6:30 - 9:30pm
CP-12B will run the last four Tuesdays. (May 5 - May 26) 6:30 - 9:30pm
holding a MA General Contractor’s License is re-
quired to take 12 hours of continuing education for that cy-
cle. This course has been approved by the Massachusetts
Board of Regulations and Standards for 12 hours of continu-
ing education requirements.
*Code books will be available for additional fees.
District Price: $150.00* Non-District: $175.00*
Basic Carpentry
Instructor: Jeff Fortin
This course will introduce woodworking basics; specific skills
in measurement, layout, and the proper use of hand tools.
Students will be required to make a few small projects with
step-by-step procedures and instruction. The basics are
vital knowledge needed to better understand more advanced
woodworking techniques. Safety is stressed throughout.
Carpentry
Building Official Certification
: Dave Riquina
8 Weeks 6:30 – 9:30
This course is intended to prepare individuals to take the
building inspector certification exams. Candidates must
meet the minimum qualifications of MGL chapter 143 - 3,
which requires a minimum of five years of construction
experience in a direct supervisory position to take the
certification exam. Certification will qualify you for municipal
employment as a building inspector.
10-Hour OSHA Construction and Safety Course
Instructor: Neil Charbonneau
9
Non-License Trades
Residential Housing Technology
Instructor: Dave Doyle
This course is designed for the future or present homeowners
that are contemplating building, renovating, or repairing their
own homes along with general home maintenance. Classes
will cover building terminology, replacement windows, code
requirements, and drawing techniques to obtain a building
permit. Shop instruction will include use of hand and power
tools, rafter and stair layout using a framing square.
Furniture Refinishing Fundamentals
Instructor: Joseph Arruda
If you have a piece of furniture that needs a face lift, this is
the course to take. The first class will be an orientation to
evaluate the piece, and an overview of different types of
finishes and solvents. Students are responsible for all
materials, solvents, and finishes. Reconstruction is held to a
minimum.
Fine Woodworking
Instructor: Joseph Arruda
If you have some experience in woodworking and would like to
take the next step in creating a turn of the century piece, take
the challenge. This course includes complete step-by-step
instruction in creating a one of a kind piece such as a Queen
Anne step stool and a true hand-cut dovetail blanket chest,
using typical hand tools and modern machine techniques.
Prerequisite: CP-01/ previous carpentry training
Millwork
Instructor: Donald Desrosiers
The use of power equipment, safety, and operation make up
this program. Students are required to do a project that in-
volves the use of circular saws, jointers, radial saws, planers,
shapers, and small power tools.
Prerequisite: CP-01/ previous carpentry training
Spring 20
Carpentry
Interested in a career change or training for another industry?
Several GNB Voc-Tech Adult Ed programs are approved training programs through the
MassHire workforce system. Financial assistance for these programs may be available to
qualified individuals. Visit the MassHire Greater New Bedford Career Center who provides
job seekers with career guidance as well as referrals to jobs and career training to learn
more.
MassHire Greater New Bedford Career Center
618 Acushnet Avenue, New Bedford, MA 02740
(508) 990-4000
10
Non-License Trades
Instructor: TBD
This course will introduce students to Microsoft Word and the word processing skills necessary to write letters and reports, create flyers and newsletters, and improve office skills. In this hands-on course, students will learn how to create documents, format pages and text, create tables, envelopes and labels, edit and proof documents, and use the mail
merge feature.
Prerequisite: Windows or equivalent knowledge .
Instructor: TBD
This course will introduce students to Microsoft Excel. Students will learn how to format data and use formulas. Students will also learn how to design charts and how to filter/sort data. Intermediate skills such as absolute references, conditional formatting, and linking cells are also introduced in this session. Students will master the basics of
Excel through hands-on instruction.
Prerequisite: Windows or equivalent knowledge.
Intro to Digital Photography
Instructor: TBD CAD (Computer Aided Drafting) Auto CAD (Latest Version) Instructor: Steve Johansen
This beginner course offers the use of graphic-oriented com-
puter software for designing and drafting operations.
Prerequisite: Students should be familiar with drafting gram-
mar/procedures and have basic computer knowledge.
DP-14 Night: Wednesday
Google Office Suite
Instructor: Ben DosSantos
Learn the basics of Google’s Office replacement, Docs,
Sheets, Slides, and Forms. This class will go over Google’s
own suite of data processing tools. We will go over how to
develop documents, spreadsheets, presentations, surveys,
and much more. You will learn how to utilize Google’s
document sharing tool that allows your whole team to work on
one document seamlessly.
DP-17 Night: Tuesday
Introduction to Adobe Illustrator
Instructor: Mike deGouveia
Students will learn the core principles of how to sketch, trace and draw in Adobe Illustrator. We will use a variety of tools to
create and manipulate beautiful vector graphics. We will also discuss and utilize proper file management to maintain smooth
and efficient work flow.
Prerequisites: Basic computer knowledge
Computers DP-06 Night: Tuesday
Microsoft Office
Instructor: TBD
Learn the basics of Windows, Word, Excel, PowerPoint, and
Access. This class covers introductory topics and concepts
that will assist you in gaining an understanding of the
programs and their uses. Learn the basics or update your
knowledge of MS Office earlier version to the 2010 release.
11
MA-01 Night: Tuesday
Basic Machine Shop Training Instructor: Randy Morrison
District Price: $175.00* Non-District: $200.00*
Collision Repair Instructor: Michael McConnell
Students will learn common auto body repair practices and paint and refinishing techniques to prepare them for career opportunities in the Collision Repair field. Each student will have the opportunity to work with the tools, instruments and
equipment necessary to perform the tasks set forth.
Instructor: TBD
Instructor: Matt Talbot
MA-02 Night: Tuesday
Basic Machine Shop Training II Instructor: Randy Morrison
This course is available to students familiar with the basics of machining, measuring, and blueprint reading. Projects will be based on milling machine procedures and surface grinding. Anyone interested in this class will be given an introductory
lesson on how to set up and operate a CNC lathe.
Prerequisite: MA-01/Machine Shop Experience District Price: $175.00* Non-District: $200.00*
Non-License Trades
Idea for a Class?
Is there a class you would like to take or teach for us?
Send your ideas to [email protected] or drop off suggestions
at the school, care of GNB Voc-Tech Institute.
Auto Machine Shop
12
Non-License Trades Spring 20
MIG-TIG Welding
Instructor: Paul Mendez
This is an introductory program involving the feeding of a
consumable wire through a shielding gas and also tungsten
inert gas welding.
Arc Welding
Instructor: Marc Ferreira
Shop instruction includes the operation, care, maintenance,
and safety in machine operation, voltages, amperages, and rod
selection. Use of welding machine for beading, butt, flat, verti-
cal, and overhead welding are covered in this course.
Welding
Ways to Register:
Online
Go to The Adult Ed Website at https://www.gnbvt.edu/VTI and select Register Online Now!
– Create Account or Sign In (Credit Card Only)
In Person
(Cash, Credit, and Checks)
During School Hours:
8:00am – 3:00pm
Summer hours vary
Adult Ed Office Hours:
6:00pm – 9:30pm
Over The Phone
(Credit Card Only)
(508) 998-3321 Ext. 195
13
Instructor: Phebe Ditata
This introduction course in the Portuguese language will
enable the student to speak, as well as understand, common
expressions.
D
Instructor: Jennifer Borden
This course will focus on survival skills in ASL, with
emphasis on building receptive and expressive sign
vocabulary. Students will learn the use of signing space, non
-manual components including facial expressions, sign skills,
body postures, and introduction to finger -spelling.
Instructor: Bob Branco
This course introduces the fundamentals of the braille code,
including the letters of the alphabet, numbers, and
punctuation, giving you the tools to communicate in writing
with family members or clients who read braille. Suitable for
blind and sighted students.
Enrichment Classes
Instructor: Mary Urbanek
This introduction course in the Spanish language will enable the student to speak, as well as understand, common expressions.
This class is a continuation of the Beginner Class.
D
Canvas Painting
Instructor: Debbie Macy
Oil and acrylics for hobbyists as well as experienced artists.
Come join the fun with Debbie Macy!
Watercolor Painting
Instructor: Karen Zukas
This course is for all levels of watercolorist. A wide variety of
techniques for the beginner to the advanced will be covered.
Emphasis will be placed on color & design assisting each stu-
dent to create unique expressions of thought and emotion. Em-
phasis will be placed on composition technique and process.
Personal attention to ach student allows for rapid progress in
creating unique products.
Upholstering
Instructor: Manny Medeiros
Welt seam, naugahyde, refinishing, etc. Bring your piece of
furniture the first night of class. (No Couches or Loveseats)
Any evening school student who decides to leave furni -
ture overnight on our premises does so at their own risk.
Woodcarving
Instructor: Michael Weydt
Languages
Art
Special Interests
14
Enrichment Classes Spring 20
Instructor: Bunny Mogilnicki
This class will enable participants to create many floral pro-
jects such as wreath making and decorating; how to care
and condition cut and dried flowers; making centerpieces;
corsages and boutonnieres; Oriental designs; arrangements
of different shapes, modern and traditional; wedding bou-
quets and many more fun uses for flowers. Students will
take home all the projects they make during the class. En-
joy the art of floral design for many years to come with the
processes learned in this class.
Basic Sewing for the Home
Instructor: Mary Ann Zuber
Update your home decor with several small accent projects great for
beginners and those wishing to refresh their skills on a sewing ma-
chine. Projects include accent pillows, table runners, curtains and
more. Skills taught will include machine threading and operation,
project planning, seams, and seam finishes, adding piping, and in-
stalling a zipper. Come to the first class with some basic hand tools.
Project supplies will be discussed at that time.
Power Machine Quilting
Instructor: Christine Gallagher
This streamline quilting course is perfect for those of you who
always wanted to make a quilt but don’t have a lot of time.
Learn the latest techniques in rotary cutting, block construc-
tion, paper piecing, etc. Come join the fun, make new friends,
and create great quilts. These classes fill fast! Register early!
Beginners: Monday Night Only
Power Machine Quilting (Afternoon)
Instructor: Eileen DeRego
Clothing
Floral/Gardening
Knitting
Instructor: Karen Walsh
All levels are welcome!
Knitting is back and it’s hotter than ever. Whether you picked
up a pair of needles at a young age or started later, there’s no
doubt you’ll enjoy this class. Knitting is a therapeutic, relaxing,
peaceful and social pastime, extending way beyond knitting a
cute scarf. Learn to knit or bring in a project to work on.
15
Enrichment Classes
Basic/Advanced Cake Decorating
Instructor: Jenna Frehill
This hands-on course will provide the fundamentals necessary to create any special occasion cake from whimsical to elegant designs. Cupcake fillings and designs will also be covered. Learn how to make shell borders, drop flowers, sweet peas, leaves, vines, timeless roses, and use star fill-in techniques. This course will also focus on how to make the perfect icing consistency using basic and butter -cream icing.
For the more advanced student: Why stop at decorating cakes with just icing? Learn how to work with fondant. You’ll be amazed at how easy it really is. You will learn how to cover cakes in fondant and the different decorating options like cutouts, figures, and flowers to make gorgeous cakes for friends and family for years to come.
Please bring a small cake to class with you every week.
Everyday Cooking the Culinary Way
Instructor: Robert Wilkinson
Combine your love for food with a passion for knowledge.
This course will cover the basic and advanced preparation of
appetizers, stocks, sauces, soups, meats, seafood and poul-
try. Combined with sanitation and proper knife handling
skills, together we will embark upon a tasteful journey full of
flavors and techniques. Come and learn new skills you will
use in everyday situations.
Yoga for Beginners and Intermediate
Instructor: Katelyn Fitzsimmons
This eight-week course will teach beginner and intermediate
students proper form of the fundamental yoga postures. Stu-
dents will gain strength, balance and suppleness. This class
requires some athleticism. Leave class feeling relaxed and
renewed!
Spring 20
®
Instructor: TBD
Time: 4:00 - 7:00 pm
*Price includes book, class and exam
District Price: $200.00* Non-District: $225.00*
Food Health
Laborers work with their hands,
craftsmen work with their hands and mind,
but ARTISANS work with their hands, mind and heart.
WE ARE ARTISANS! www.gnbvt.edu/VTI
Greater New Bedford Vocational Technical Institute
3/3/20
Greater New Bedford Vocational Technical Institute
1121 Ashley Boulevard, New Bedford, MA 02745
Rick Quintin | (508) 998-3321 ext. 195 | email: [email protected] | http://www.gnbvt.edu/VTI
MARINE TECHNOLOGY
Instructor: John Bernier Mon thru Thu: 3:00 - 9:00 pm Selected Saturdays 8:00 am - 1:00 pm
300 hours (12 Weeks)
March 16 - June 4
GNBVTI now offers a Chapter 74 state-approved post-secondary program in Marine Technology. GNBVTI post-secondary programs are rigorous and prepare learners to meet the challenges of their selected career and industry. All applicants must apply for selective admission to the post-secondary programs. See page 5 for details on Full Program.
We are now accepting applications for Trimester 3.
Trimester Price: $1,475
EMT-Emergency Medical Technician
Instructor: Dave Zander
(FALL 2020) Tues & Thurs: 5:30 - 9:30 pm & Alternate Saturdays: 8:00 am - 4:00 pm
13 Weeks - (160 Hours)
The healthcare industry continues to grow and the basic training program for Emergency Medical Technicians (EMTs) has an over-all objective to improve the quality of pre-hospital emergency care ren-dered to victims of accidents and sudden illness. As such, the course develops skills in symptom recognition and in all emergency care procedures and techniques currently considered to be within the responsibilities of an EMT providing emergency medical care with an ambulance service.
*District Price: $1,100 *Non-District: $1,200 * Test fees are not included in price.