grinder catalogue

Angle GrinderCatalogue

Index

2

Super joint System (SJS)

N9500N

9520B / 9521NB / 9552NB 03

03

049553HN / 9554HN / 9555HN / 9556HN / 9557HN / 9558HN

05GA4030 / GA4530 / GA5030

GA4034 / GA4534 / GA5034 06

079556HP / 9557HP / 9558HP

089015B / 9016B

GA5010 / GA6010 / GA5011 09

10

9563HZ / 9564HZ / 9565HZ 11

9561CR / 9562CR

129564PZ / 9565PZ

9563C / 9564C / 9564CV / 9565C / 9565CVL

13

14

GA7001

15

9067HB / 9069HB

GA7050 / GA7050R / GA9050 / GA9050R

16

16

GA7020 / GA7030 / GA7040S / GA9020 / GA9030 / GA9040S

Abrasive disc

Accessories

17

18

19

Cutting wheels and Grinding wheels

Thin cutting wheels

21

Aluminium wheel

Long life metal cutting wheel

22

Wire cup brush

Wire cup brush (T-series)

22

Flap disc chart

22

23

Flap disc

24

Abrasive disc and related accessories

25

Dust collceting wheel guard

Wheel cover

26

Safety cutting flanges

27

27

Super flange

Dust cover attachment

Lock nut wrench

Grip

Diamond Wheels Chart

28

28

28

28

28

Offset diamond wheel / Diamond cup wheel

Electro deposited diamond wheel

Ring

Daimond Wheels (Segmented / Segmented dry / Corugated / Corrugated rim) 30

31

31

31

29

20

Contents Page

9564PC / 9565PC

N9500N100mm (4”)

Popular and classic Angle Grinder

Operation switch is located on tail

Can be used with grinding wheel oroptional diamond wheel

Continuous rating inputDepressed center wheel : Abrasive disc : Cut-off wheel: Wire cup brush : No load speedOverall lengthNet weightPower supply cord

570W100mm (4")100mm (4")110mm (4-3/8")75mm (3")12,000rpm245mm (9-5/8")1.8kg (3.9lbs)2.5m (8.2ft)Standard Equipments:

Depressed Centre Wheel, Lock Nut Wrench.

9520B / 9521NB / 9522NB100mm (4”) 115mm (4 -1/2”) 125mm (5”)

Incredibly light, yet powerful one-hand grinder with slender barrelgrip and reduced noise.

Powerful grinding from an amazingly slim and trim angle grinder.

Available in 127V, 220V, 240V(for 9522NB:127V, 220V only)

Carbon Brush Size

Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Grip.

Angel GrindersMakita Develops different types of angle grinders to suit the proffesional needs

670WATTS

Continuous rating inputDepressed center wheel Abrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

670 W100 mm (4”)100 mm (4”)110 mm (4-3/8”)75 mm (3”)12,000 rpm259 mm (10-3/16”)1.3 kg (2.9 lbs)2.5 m (8.2 ft)

670 W115 mm (4 – 1/2”)115 mm (4 – 1/2”)115 mm (4 – 1/2”)90 mm (3-1/2”)12,000 rpm262 mm (10 – 3/8”)1.3 kg (2.8 lbs)2.5 m (8.2 ft)

670 W125 mm (5”)125 mm (5”)125 mm (5”)90 mm (3-1/2”)9,500 rpm262 mm (10-3/8”)1.3 kg (2.9 lbs)2.5 m (8.2 ft)

411

570WATTS

Available in 127V, 220V, 240VCarbon Brush Size 411

9520B 9521NB 9522NB

Double Insullation

3

325

9553HN / 9554HN / 9555HN 9556HN / 9557HN / 9558HN

100mm (4”) 115mm (4 -1/2”) 125mm (5”)Available in 127V, 220V, 240V

Carbon Brush Size

840WATTS

710WATTS

710/840W Power Anti-Dust Motor

Generates more wattage and torque which helpsreduce the possibility of overload.

Armature coated with protective zigzag varnish and Fieldcoated with powder varnish protects the motor from dustand wire breakage, ensuring more durability for any heavyapplication.

Powder varnishProtects all ball bearings from dust and debrisLabyrinth construction

O Rings for Protection from Grease-Leakage

At the Lock Nut Pin Close to the bearing

Can be positioned at every 90°.Dust-Proof Ball BearingRotatable gear housing

Zig-Zag varnish

The “O” rings around the gear housing have been specially placed to prevent grease leakage, thisultimately increases the life of the gears

Continuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

710W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm258mm (10-1/8")1.8kg (3.9lbs)2.5m (8.2ft)

710W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)10,000rpm258mm (10-1/8")1.8kg (4.1lbs)2.5m (8.2ft)

710W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)10,000rpm258mm (10-1/8")1.9kg (4.2lbs)2.5m (8.2ft)




9553HN 9554HN 9555HN 9556HN 9557HN 9558HN

Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip.

4

GA4030 / GA4530 / GA5030100mm (4”) 115mm (4 -1/2”) 125mm (5”)

Slim motor housing with a small circumference of 179mm- Motor housing and rear cover ergonomically and uniquely ribbed for sure and comfortable gripping.- Rear cover ergonomically tapered for easy gripping.- Ergonomic 20º side grip angle.

Extra-high reliability and durabilityHigh quality motor with excellent heat-resistance

Very comfortable in any gripping way

459Available in 127V, 220V, 240V

Carbon Brush Size

720WATTS

Reliable machined bevel gears

- Dust-proof ball bearings- Motor-field coated with protective powder varnish- Two labyrinth rings seal the ball bearings and entirely protect the gears and the motor from dust and dirt.

Protection against dust

GA4030 GA4530 GA5030Continuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord





5

GA4034 / GA4534 / GA5034100mm (4”) 115mm (4 -1/2”) 125mm (5”)

Slim motor housing with a small circumference of 186mm

Paddle Switch

- Motor housing and rear cover ergonomically and uniquely ribbed for sure and comfortable gripping.- Rear cover ergonomically tapered for easy gripping.- Ergonomic 20º side grip angle.

Extra-high reliability and durabilityHigh quality motor with excellent heat-resistance

Very comfortable in any gripping way

459

Available in 220V, 240V

Carbon Brush Size

720WATTS

Reliable machined bevel gears

- Dust-proof ball bearings- Motor-field coated with protective powder varnish- Two labyrinth rings seal the ball bearings and entirely protect the gears and the motor from dust and dirt.

Protection against dust

GA4034 GA4534 GA5034Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord





Ergonomically designed to provide easy on/off switching by the hand gripping motor housing, allowing for comfortable, continue operation equipped a lock-off button to prevent accidental start.

Double Insullation

6

Paddle SwitchDead man Switch

325

9556HP / 9557HP / 9558HP100mm (4”) 115mm (4 -1/2”) 125mm (5”)

Available in 127V, 220V, 240V (for 9556HP / 9557P)Available in 127V, 220V (for 95568HP)

Carbon Brush Size

840WATTS

High Power Anti-Dust Motor

Generates more wattage and torque which helps reduce thepossibility of overload.Armature coated with protective zigzag varnish and Fieldcoated with powder varnish protects the motor from dustand wire breakage, ensuring more durability for any heavyapplication.

Powder varnish

Protects all ball bearings from dust and debrisLabyrinth construction

O Rings for Protection from Grease-Leakage

At the Lock Nut Pin Close to the bearing

Can be positioned at every 90°.

Dust-Proof Ball Bearing

Rotatable gear housing

Zig-Zag varnish

The “O” rings around the gear housing have been specially placed to prevent grease leakage, this ultimately increases thelife of the gears

Continuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord


840W115mm (5")115mm (5")115mm (5")90mm (3-12”)11,000rpm273mm (10-3/4")2.1kg (4.5lbs)2.5m (8.2ft)

840W125mm (5")125mm (5")125mm (5")90mm (3-12”)11,000rpm273mm (10-3/4")2.1kg (4.5lbs)2.5m (8.2ft)

9556HP 9557HP 9558HP


Double Insullation

Easy-to-operate paddle type on/off switch

- With non-slip pattern on the surface of paddle lever for easy on-off control - The lock-off button is positioned in the center of the paddle lever so that it is operable no matter what portion of the lever is gripped.

Paddle switch

Lock-off button

7


9015B / 9016B125mm (5”) 150mm (6”)


Carbon Brush Size

1050WATTS

Protective powder Vanish-coating on

field

Zigzag varnishing on

Armature

High power & Heavy-Duty motor More Durable Gears and Bearings

RotationGear housing can be screwed into the housing at any direction by 90 especially for cutting operation

Large spindle lockcan be easily preseed

Large and comfortable trigger switch

More efficient cooling system for motor.

• Gears are lubricated by securely sealed grease in gear room• Bearings are protected from dust/dirt by

Labyrinth construction

Grease sealing O-ringLabyrinth construction

Dust proof washerDust proof bearing

Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

Double Insullation

1,050W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)10,000rpm381mm (15")2.4kg (5.3lbs)2.5m (8.2ft)


9016B9015B

More comfortable and easier operation with larger triggerswitch and spindle lock button

Standard Equipments: Depressed Centre Wheel, Lock Nut Wrench, Side Grip. It will be discontinued once the current stock is over

8

GA5010 / GA6010GA5011

125mm (5”)

150mm (6”) 303Available in 127V, 220V, 240V (for GA5011 / GA6010)

Available in 220V (for GA5011)

Carbon Brush Size

1050WATTS


field


Armature

High power & Heavy-Duty motor

Motor housing features circumference (253mm)

Slim and Compact Motor Housing

Small gear housing for Increased Maneuverability

Large shaft lock button for easy press

Ergonomically designed rubberized gripprovides more control and comfort.

B

More Durable Gears and Bearings • Gears are lubricated by securely sealed grease in gear room• Bearings are protected from dust/dirt by

Labyrinth construction



Two Trigger Types Available

Single-finger trigger(for GA5010, GA6010)

Large type trigger

(for GA5011)

Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

Double Insullation



GA5011 GA60101,050W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm384mm (15-1/8")2.6kg (5.8lbs)2.5m (8.2ft)

GA5010


9

With the rotation of the armature the coil spring is extended, its

tightening force increases the grasp of the coil on the armature

spindle and shaft. At this point the gear and spindle start to rotate

simultaneously

9563HZ , 9564HZ,9565HZ

The Makita Super Joint System is in place for the wellbeing of both the user and their tools. The Super Joint System will instantly disengage

a tools motor at the sign of any sudden, overbearing force or pressure that may be caused by a snag on the blade.

This means that of all the unexpected things that could occur while you're on the work site, your machine running off from you and causing

harm won't be one of them.

Of course, the other benefit of the Super Joint System is the longevity it affords your equipment. By removing the strain that can be put on

a motor at times, by disengaging it's unlikely for any parts to grind or overload and so prevent any needed repairs or even replacements.

SJS is an advanced drive system based on a coil spring which wraps around the internal drive spindle.

- The Super Joint System (SJS) delivers the optimum power and torque to the grinder disc, so you get the top performance.

- SJS means greater durability. The way SJS engages means the motor and gears are protected from shock at start-up or if the grinder grabs.

- The SJS drive system is based on a coil spring which engages more gradually at start-up and instantly disengages if the grinder grabs

SJS - Super Joint System

Tightens

Grinders with Super Joint System

Against the shock of accidental spindle lock or overload, which

surpasses the limited torque designed for the tool, the coil

spring will override the armature shaft preventing damage to

the armature and internal components.

Loosens

10

Spiral bevel gear

Armature shaft

Coil-spring

Page no 11

9564PZ, 9565PZ(Paddle switch)

Page no 12

9564PC, 9565PC(Paddle switch)

Page no 15

9561CR, 9562CR(Anti Restart function)

9563C, 9564C, 9564CV,9565CV, 9565CVL

Page no 13 Page no 14

9563HZ / 9564HZ / 9565HZ100mm (4”) 115mm (4 -1/2”) 125mm (5”) 325

Available in 127V, 220V, 240VCarbon Brush Size

1100WATTS

Standard Equipments: Lock Nut Wrench, Side Grip (Tool does not come with depressed centre wheel)

9563HZ 9564HZ 9565HZContinuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

1,100W100mm (4")100mm (4")100mm (4")75mm (3”)11,000rpm299mm (11-3/4")2.1kg (4.6lbs)2.5m (8.2ft)

1,100W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)11,000rpm299mm (11-3/4")2.3kg (5.1lbs)2.5m (8.2ft)

1,100W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm299mm (11-3/4")2.3kg (5.1lbs)2.5m (8.2ft)


field


Armature

More Durable Gears and Bearings• Gears are lubricated by securely sealed grease in gear room

• Bearings are protected from dust/dirt by Labyrinth construction • New Field with superior wiring technology leads to higher wattage without motor-size expansion. • The successors inherit slim body, zigzag varnishment on armature and powder varnishment on field from the predecessors

Easy-to-Grip Shape

Internal brush holders enable the machine circumstance to be flatwithout protrusions.

High power & Heavy-Duty motor



Double Insullation

11

9564PZ / 9565PZ115mm (4 -1/2”) 125mm (5”)


Carbon Brush Size

1,100WATTS


field


Armature


• Bearings are protected from dust/dirt by Labyrinth construction


• With non-slip pattern on the surface of paddle lever for easy on-off control • The lock-off button is positioned in the center of the paddle lever so that it is operable no matter what portion of the lever is gripped.

Paddle switch

Lock-off button

Easy-to-Grip Shape




Continuous rating inputDepressed center wheelAbrasive discDiamond wheel Cup wire brushNo load speedOverall lengthNet weightPower supply cord

Double Insullation

1,100W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2)12,000rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)

9565PZ1,100W125mm (5")125mm (5")125mm (5")90mm (3-1/2)12,000rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)

9564PZ

Standard Equipments: Lock Nut Wrench, Side Grip. (Tool does not comes with depressed centre wheel)

12


9561CR / 9562CR115mm (4 -1/2”) 125mm (5”) 318

Available in 127V, 220V, 240VCarbon Brush Size

1200WATTS


field


Armature

More Durable Gears and Bearings - Gears are lubricated by securely sealed grease in gear room- Bearings are protected from dust/dirt by Labyrinth construction

Anti-Restart Functionprevents accidental startup

Even if plugged in with the switch “ON”, the tool does not start with a blinking red light for visualwarning.

Easy-to-Grip Shape


Electronic Limiter & Electronic Controller• Stops the current to protect the motor from burning when there is accidental overload on the machine.• Restarts the motor automatically when the machine is freed from the load again.• The constant speed control keeps minimizing the speed loss under loaded conditions and enables highly efficient operation.• The soft starter suppresses the rotation speed for seconds at startups to reduce the starting shock.




Double Insullation

Soft Start

Constant Speed

9561CRContinuous rating inputDepressed center wheelAbrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord


9562CR1,200W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)11,000rpm289mm (11-3/8")2.2kg (4.9lbs)2.5m (8.2ft)

13

9563C 9564C 9565CV9564CV 9565CVL100mm (4”)

115mm (4 -1/2”) 125mm (5”)


Carbon Brush Size

1400WATTS

9563C 9564C 9564CVContinuous rating inputDepressed center wheelAbrasive discDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

1,400W100mm (4")100mm (4")100mm (4")75mm (3”)12,000rpm299mm (11-3/4")2.1kg (4.6lbs)2.5m (8.2ft)


1,400W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2”)2,800 - 12,000rpm299mm (11-3/4")2.4kg (5.2lbs)2.5m (8.2ft)

9565CV1,400W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)2,800 - 12,000rpm299mm (11-3/4")2.4kg (5.2lbs)2.5m (8.2ft)

9565CVL

9565CVL

1,400W125mm (5")125mm (5")125mm (5")90mm (3-1/2”)2,000 - 7,800rpm311mm (12-1/4")2.1kg (4.6lbs)2.5m (8.2ft)

High power & anti-dust motor In small sircumference barrel grip body.

Armature coated with protective zigzag varnish and Field coated with powder varnish protects the motor from dust and wire breakage, ensuring more durability for anyheavy application.

Powdervarnishment

Zigzagvarnishment

Easy-to-Grip Shape Internal brush holders enable the machine circumstance to be flatwithout protrusions

More Durable Gears and Bearings

Equiped with Electronic Control Electronic limiter Speed control dial

Gears are lubricated by securelysealed grease in gear room Bearings are protected from dust/dirt by Labyrinth construction

For keeping constant rotation speed evenunder loaded condition, and for soft start.

Stops the electric current when accidental overload on the machine, and protects motor from burning. And when themachine will be freed from the load, restart the motor automatically.

For getting optimum rotatingspeed to suit various workpiece.


Plastic Head Cover

Hook-and-loop systemabrasive paperEasy and quick changeof abrasive paper

Making it easy to grip gear housing,is required for stonework.

Ideal for sanding applications in low speed

9556CVLlow speed version of Model 9564CV and 9565CV

Only for Model 9564CV / 9565CV / CVL

Double Insullation

Variable Speed

Soft Start

- -

Constant Speed

14

9565PC115mm (4 -1/2”) 125mm (5”)

9564PC /318

Available in 127V, 220V

Carbon Brush Size

1,400WATTS


field


Armature


• Bearings are protected from dust/dirt by Labyrinth construction


• With non-slip pattern on the surface of paddle lever for easy on-off control • The lock-off button is positioned in the center of the paddle lever so that it is operable no matter what portion of the lever is gripped.

Paddle switch

Lock-off button

Easy-to-Grip Shape





Double Insullation

9565PC

Soft Start

Constant Speed

9564PC1,400W115mm (4-1/2")115mm (4-1/2")115mm (4-1/2")90mm (3-1/2)11,500rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)

1,400W125mm (5")125mm (5")125mm (5")90mm (3-1/2)12,000rpm307mm (12-1/8")2.4kg (5.2lbs)2.5m (8.2ft)

• The constant speed control keeps minimizing the speed loss under loaded conditions and enables highly efficient operation.

• The soft starter suppresses the rotation speed for seconds at startups to reduce the starting shock.

• Stops the current to protect the motor from burning when there is accidental overload on the machine. • Restarts the motor automatically when the machine is freed from the load again.

Electronic ControllerElectronic Limiter


15


16

GA7001180mm (7”)

153Available in 220V

Carbon Brush Size153Carbon Brush Size

2000WATTS

1650WATTS

Extra heavy duty motor for high production

Durable aluminium body

Unique design

Rugged Metal Housing for Long Tool Life

Plastic handle protect the operators from electric shock

Mouting angle of handle can be changed at every 90° in order tobe employed for cutting

Standard Equipments: Depressed Center Wheels x 2, Lock Nut Wrench, Grip.

Continuous rating input

Depressed center wheel Cut-off wheelAbrasive disc Wire cup brush No load speedOverall lengthSpindle threadNet weightPower supply cord

115V : 1,650 W220 - 240V : 2,000 W180 mm (7”)180 mm (7”)180 mm (7”)110 mm (4-3/8”)8,000 rpm411.5 mm (16-1/4”)DIN type5.7 kg (12.6 lbs)2.5 m (8.2 ft)

Available in 127V

9607HB / 9609HB180mm (7”) 230mm (9”)

153Available in 220V, 240VCarbon Brush Size

2000WATTS

Standard Equipments: Lock Nut Wrench, Grip (Tool does not come with depressed center wheel).

It will be discontinued once the current stock is over

A tough contender, very rugged and powerful with double insulation.

Precision gearing plus all ball bearing construction.

Shaft lock up front for easy wheel/attachment changes.

Three-way tool rest on top.

Reversible side grip.

Continuous rating inputDepressed center wheel Abrasive DiscDiamond wheel Wire cup brushNo load speedOverall lengthNet weightPower supply cord

2,000 W180 mm (7”)180 mm (7”)180 mm (7”)110 mm (4-3/8”)8,000 rpm413 mm (19-1/16”)5 kg (11 lbs)2.5 m (8.2 ft)

9607HB2,000 W230 mm (9”)230 mm (9”)230 mm (9”)110 mm (4-3/8”)6,200 rpm413 mm (19-1/16”)5.3 kg (11.6 lbs)2.5 m (8.2 ft)

9609HB

Double Insullation

Superior Anti-Dust StructureProtective zigzag varnish on armature coil.Protective powder vanish-coating on field coil.Bearing-protective labyrinth construction.Vent slots designed to minimize dust entrance.

Zigzag varnish

powder vanish-coating

GA7050R / GA9050RGA7050 / GA9050

230mm (9”)180mm (7”)


Carbon Brush Size

2,000WATTS

Excellent Heat Resistance Grinders

Large Trigger Switch Large trigger switch with lock-on featurefor continuous operation.

Most Compact Lightweight and Compact body,Reducing operator fatigue incontinuous use

Anti-restart function (GA9050R / GA7050R)Prevents accidental start-up for safetyeven if the tool is plugged to power source with the lock-on switch on.

Solid Green indicates thatcurrent can be applied to thecircuit.

Blinking Red warns thatAnti-restart function is activated

Vibration Absorbing Side Grip (option)

Rotatable gear housing Can be positioned at every 90 degrees (left and right ) to suit most cutting and grindingoperations.


Double Insullation

Anti Restart Function



2,000W230mm (9")230mm (9")230mm (9")110mm (4-3/8”)6,600rpm455mm (17-7/8)4.8kg (10.6lbs)2.5m (8.2ft)

GA7050R GA9050 GA9050R

Soft Start -


GA7050

-

-

-

The “O” rings around the gear housing have been specially placed to prevent grease leakage, this ultimately increases the life of the gears and the felt ring prevents thegrease from entering into the motor section

“O“ Rings and Felt Rings for Protectionfrom Grease Leakage

Small gear housingMakes maximum cutting depth larger

Standard Equipments: Lock Nut Wrench 35, Side Grip (Tool does not comes with depressed centre wheel).

17

Superior Anti-Dust StructureProtective zigzag varnish on armature coil.Protective powder vanish-coating on field coil.Bearing-protective labyrinth construction.Vent slots designed to minimize dust entrance.

Zigzag varnish

powder vanish-coating

GA7030 / GA9030GA7020 / GA9020

GA7040S / GA9040S230mm (9”)180mm (7”)


Carbon Brush Size

2,600WATTS

2,400WATTS

2,200WATTS

Machined Bevel GearHaving durability higher than sintered gear.

Push the Button...

Excellent Heat Resistance Grinders

Low Vibration Rear Handlewith Soft grip for more comfortand control.

Large Trigger Switch Large trigger switch with lock-on featurefor continuous operation.

Vibration Absorbing Side Grip (option)

Electronic Limiter

Vibration Absorbingrubber

Rotatable rear Handle (Only for GA70430/40S andGA9030/40S) Can be positioned to suit soft grip for morecomfort and control

and rotate 90 degrees


Double Insullation





GA7030 GA7040S GA9030 GA9040S

Soft Start

Electronic Limiter

-

-


GA7020

- -


GA9020

-

-

Stops the electric current when accidental overload on the machine, and protects motor from burning and when the machine will be freed from the load, restart the motor automatically.

The “O” rings around the gear housing have been specially placed to prevent grease leakage, this ultimately increases the life of the gears and the felt ring prevents thegrease from entering into the motor section

“O“ Rings and Felt Rings for Protectionfrom Grease Leakage

(Only for GA7030/40S GA9030/40S)

(Only for GA7040S and GA9040S)

Standard Equipments: Lock Nut Wrench 35, Side Grip (Tool does not comes with depressed center wheel).

18

Abrasive DiscAccessories

How to read the spec. Aluminum Oxide Group

Grit Size

Hardness of grinding wheel

Type of Bond

EN Standard

Pictograms for safety use

Application

Color code

Spec

Validity

OSA mark(Organization Safety Abrasives)

Max operating speed

SizePart number

Brown Fused Aluminum ：

Closer to A, softer grinding wheel is Closer to Z, harder grinding wheel is

Main component is phenol resinMechanically strong, but weak against moisture and high heat

Resin Bonded = Resinoid(BF)

Soft grinding wheel Hard work piece

A

White Aluminum Oxide ：

Black Silicon Carbide ：

Alumina Zirconium ：

Coarse Fine

WA

C

Z

24 36 60 80 120

Hard grinding wheel Soft work piece

Very Soft Soft Middle Hard Very Hard

A - G H - K L-O P - S T - Z

Blue: Matale

Gold: INOX

Green: Masonry

Silver: Aluminum

19

Thin Cutting WheelB-series - Flat Center

Thin Cutting Wheel

Thin Cutting Wheel

(for stainless steel)

(for stainless steel)

D-series - Flat Center

• Fast Cutting.• No Burn Mark and Bur.• Can Cut Steel, Stainless Steel, Aluminium & Copper.

1mmmm1thickness

**

*** 1.6mm thickness for 150/180mm wheel* 1.9mm thickness for 230mm wheel

100x1.0x16mm115x1.0x22.23mm

125x1.0x22.23mm

150x1.6x22.23mm

Inox A60TInox A60T

Inox A60T

Inox A60T

B-12201

B-12217

B-12239

B-12251

15,300

13,300

12,250

10,200

10pcs Shrink Wrapped




10pcs Shrink Wrapped 10pcs Shrink Wrapped

4sets = 40pcs per box



4sets = 40pcs per box180x1.6x22.23mm Inox A60T B-12267 8,3004sets = 40pcs per box

230x1.9x22.23mm Inox A60T B-12273 6,6504sets = 40pcs per box

Size (mm) Grit Part No. Max. RPMPackage DetailsPackage Details

• Higher cutting speeds, up to 2-3 times faster.• Reduced wastage of work materials.• No discolouration (rust) around stainless steel cutting edge.

Size (mm) Grit Part No. Max. RPM

100 x 1.0 x 16115 x 1.2 x 22.23125 x 1.2 x 22.23

180 x 2.0 x 22.23230 x 2.0 x 22.23

D-18758

D-18764D-18770

D-18786

WA60TWA60TWA60T

WA36RD-18792

15,28013,29012,200

8,6006,600WA36R

D-series - Depressed center D-18817

• Higher cutting speeds, upto 2-3 times faster.• Reduced wastage of work materials.• No discolouration (rust) around stainless steel cutting edge.

• It will be discontinued once the current stock is over

6,600

Size (mm) Grit Part No. Max. RPM

125 x 1.2 x 22.23

180 x 2.0 x 22.23

12,200

8,600

• D-18823

• D-18839

WA46S

WA36R230 x 2 x 22.23 • D-18845WA36R

20

D-series - Depressed center

A-series - Depressed center

A30S : For Metal C30S : For Masonry, Stone

100 x 3.0 x 16.00

115 x 3.0 x 22.23

125 x 3.0 x 22.23

180 x 3.0 x 22.23

230 x 3.0 x 22.23

100 x 3.0 x 16.00

115 x 3.0 x 22.23

125 x 3.0 x 22.23

D-18552

D-18568

D-18574

D-18580

D-18596

D-18605

D-18611

D-18627

180 x 3.0 x 22.23

230 x 3.0 x 22.23

D-18633

D-18649

15,28013,290

12,200

8,600

6,600

15,280

13,290

12,200

8,600

6,600

C30S

C30S

C30S

C30S

C30S

Size (mm) Part No. Max. RPM Cutting wheel

Cutting wheel• For fast, clean cuts, notching and slotting

A-83587

A-86745

A-83593

A-85254

A-83602

A-85260

A-83618

A-85276

A-83624

A-85282

13,690

13,690

13,290

13,290

12,250

12,250

B-05050 10,1908,500

8,500

6,650

6,650

100 x 3.0 x 16

115 x 3.0 x 22125 x 3.0 x 22

100 x 3.0 x 16

115 x 3.0 x 22125 x 3.0 x 22

150 x 3.0 x 22.23180 x 3.0 x 22.23230 x 3.0 x 22.23

180 x 3.0 x 22.23230 x 3.0 x 22.23

A30T : For Metal C30 : For Stone

Size (mm) Part No. Max. RPMGrit

C30TC30T

C30T

C30T

C30TC30T

A30T

A30TA30T

A30TA30T

A30S

A30S

A30S

A30S

A30S

Grit

A24R: For Metal

Grinding WheelD-series - Depressed Center

Size (mm) Part No. Max. RPM

100 x 6.0 x 16.00

115 x 6.0 x 22.23

125 x 6.0 x 22.23180 x 6.0 x 22.23

230 x 6.0 x 22.23

D-18443

D-18459

D-18465

D-18471

D-18487

15,280

13,290

12,2008,600

6,600

A24R

A24R

A24R

A24R

A24R

Grit

• For metal polishing and general flat grinding

A36P - For metalWA36N / WA36O - For stainless steel

100 x 6.0 x 16

125 x 6.0 x 22.23180 x 6.0 x 22.23230 x 6.0 x 22.23

A-80852A-80868A-80874A-80880

WA36N

WA36NWA36O

A-80896

13,690

115 x 6.0 x 22.23 WA36N 13,29012,2208,5006,600WA36N

Size (mm) Part No. Max. RPMGritGrinding wheel100 x 6.0 x 16115 x 6.0 x 22.23125 x 6.0 x 22.23150 x 6.0 x 22.23180 x 6.0 x 22.23180 x 6.0 x 22.23230 x 6.0 x 22.23

A24R

A36PA36P

A36P

A36PA36PA36P A-80911

A-80927A-80933A-84981

• A-88886A-80949A-80955

13,69013,29012,29010,1908,5008,5006,600


A-series - Depressed Center

21

A36N-BF - for Aluminium

115 x 6 x 22.23 B-14560A36N-BF 13,300


Aluminium Wheel

A36T-BF - for metal

115 x 3 x 22.23 B-21200A36T-BF 13,300


Long life Metal Cutting Wheel

Wire Cup Brush(Crimped cup)

• The crimped wire cup brush is a multipurpose brush suitable for wood, paint, rust removal and many other applications.

• The big innovation of the brushes is the Multithread bore M14-5/8 just one product suitable on angle grinders with bore M14 and 5/8.

22

Outer Diameter (mm) Part No.Spindle Thread Suitable for Max. RPM

T-02010

T-02026

120

T-01993

T-02004

M14 -5/8”-11

M14 -5/8”-11

60

100

14,000

90

M14 -5/8”-11

M14 -5/8”-11

115mm, 125mm grinder



180mm grinder

14,000

8,000

8,000

23

Wire Cup Brush(Crimped cup)

• Ideal for flat surfaces, edges, light rust removal.

For Model: M10: 100mm M14: 115mm or higher.• 100mm• 115mm, 125mm, 150mm, 180mm• 180mm, 230mm

Outer Diameter (mm) Part No.Spindle Thread Max. RPM

794160-5

794162-1

794371-2

794324-1

12,500

12,500

D-24066

D-24072

12,500

12,500

D-24088

D-24094

12,500

12,500

11,000

11,000

M10 x 1.25

M10 x 1.5

M14 x 2

M10 x 1.5

M14 x 2

M10 x 1.5

M14 x 2

M16 x 2

•75

•75

•90

•60

•60

•75

•75

•90

794372-0

794325-9

9,000

9,000

M14 x 2

M16 x 2

•110

•110

Wire Brush Twisted(Knot Cup)

For Model: M10: 100mm M14: 115mm or higher.


Outer Diameter (mm) Part No.Spindle Thread Max. RPMKnot Cup2

Knot Cup

D-24125

D-24131

M10 x 1.5

M14 x 2

75

75

12,500

12,500

D-24103

D-24119

M10 x 1.5

M14 x 2

60

60

12,500

12,500

D-24147

D-24153

M10 x 1.5

M14 x 2

60

60

12,500

12,500

• Can be used for heavy duty cleaning of large metal surfaces, rust and paint removal, removal of weld scale and corrosion, surface preparation for painting and welding, auto body finish and repair.

Knot Cup2Knot Cup

For Model: 100mm• Best for cleaning sides

Wire bevel Cup794163-9 12,500

12,500

M10 x 1.25

M10 x 1.5

85

85


794165-5•

It will be discontinued once the current stock is over•

Flap Disc

EN Standard

Pictograms for safety use

Application

Large pictogram indicates recommended application

Grain type/ Grit size

Max operating speed

Size

Part number

Backing Type

Fiber glass backingStandard backing type

Nylon backingFor heavy duty

Shape Type

Flat Angled

Material chart

Aluminum oxide

Best for metal Best for INOX and metal Best for Masonry

Zirconia alumina Silicon carbide

Recommended Acceptable

Wood

Description of Grit material

Description of label color

Masonry

INOX

No ferrous

Metal

Plastic

24

Flap Disc

Material - Zirconia Aluminum: For sanding and grinding metals and stainless steel. Sands flat, contoured or curved surfaces like a sanding disc.

– D-27523Z 36

Part No.P-Series

Part No.D-SeriesDia (mm)

Dia (mm)

Grit

P-39104

P-39110P-39126P-39132P-39148P-39154P-39160

P-39176

P-39182

P-39198

P-39207

D-27436

D-27442

D-27458D-27464

D-27486D-27492D-27501D-27517

–

––

–

D-27539

D-27545

D-27551

D-27567

Z 40

Z 60Z 80Z 120

Z 40

Z 60Z 80Z 120Z 40Z 60Z 80

Z 120

Z 40

Z 60

Z 80

Z 120

D-27420Z 36

–

–

––

–

–

D-27470Z 36

P-39263

P-39279P-39285

P-39291

–––

–

Z 40

Z 60Z 80

Z 120

BEST OPTIONALFor Applications

•

•

•

•

•

•

•

•

•

•

•

–

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)115 (4-1/2”)

125 (5”)

125 (5”)

125 (5”)125 (5”)

125 (5”)

150 (6”)

150 (6”)

150 (6”)

150 (6”)

180 (7”)

180 (7”)

180 (7”)

180 (7”)

180 (7”)170

170170

170

• It will be discontinued, once current stock is over

D-28117C 120

D-28070

D-28086

D-28092

D-28101

C 36

C 40

C 60

C 80

P-39350

D-28064

C 80

C 120

C 120

C 36

C 40

D-28058

D-28020

D-28036

D-28042C 60

D-28123

D-28139D-28145

D-28151

C 36

C 40C 60

C 80

D-28167C 120

Material-Silicon Carbide: Effective for sanding brick, stone & concrete.

BESTFor Applications

Part NoGrit

•

Material-Aluminum Oxide: For sanding metal, plastic, wood & steel.

BEST OPTIONAL

For Applications

D-27121A 36

D-27034

D-27040

D-27056D-27062

D-27084D-27090

D-27109

D-27115

D-27137

D-27143

D-27159

D-27165

A 40

A 60

A 80A 120

A 40A 60

A 80

A 120

A 40

A 60

A 80

A 120

D-27028A 36

D-27078A 36

Dia (mm) Part NoGrit

180 (7”)

180 (7”)

180 (7”)

180 (7”)

180 (7”)

125 (5”)

125 (5”)

125 (5”)125 (5”)

125 (5”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)

115 (4-1/2”)115 (4-1/2”)

125 (5”)

125 (5”)

125 (5”)

125 (5”)

125 (5”)

170

180 (7”)

180 (7”)

180 (7”)

180 (7”)

180 (7”)

25

Abrasive DiscMost versatile wheel for light metal grinding and sanding

Outer Diameter(mm) Grit Part No.

Pc Per Pkg

Pc Per Pkg

Part No.P-Series

Max. RPM

24

30

50

80

100

120

794065-9

794066-7

794067-5

794068-3

794227-9

794069-1

13,700

13,700

13,700

13,700

13,700

13,700

24

30

50

80

120

794104-5

794105-3

794106-1

794107-9

794108-7

11,950

11,950

11,950

11,950

11,950

24

30

50

80

120

794096-8

794097-6

794098-4

794099-2

794100-3

11,000

11,000

11,000

11,000

11,000

100

100

100

100

100

100

115

115

115

115

115

125

125

125

125

125

24

30

50

80

100

794070-6

794071-4

794072-2

794073-0

794219-8

9,200

9,200

9,200

9,200

9,200

794094-2 P-01068

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7,600

P-01080

16

20

24

30

50

80

100

120

794091-8

794092-6 P-01074

794093-4

794218-0

794095-0

794220-3

794221-1

7,600

7,600

7,600

7,600

7,600

7,600

7,600

150

150

150

150

150

180

180

180

180

180

180

180

180

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10 5

5

5

10

10

10

10

10

10

-

-

-

Rubber Pad for Abrasive DiscFor Abrasive Disc.

• With Lock Nut.• For spindle thread M14 x 2. (DIN)• For spindle thread M16 x 2, 5/8”

Outer Diameter (mm) Part No. Part No.

100mm 76 • A-81125 743009-6

115mm 100 • 794187-5 •743036-3

150mm

125mm 115 743015-1

180mm

125 743016-9

170 743012-7

For Grinder size

Spindle ThreadOuter Diameter(mm) Part No.For Grinder size

M10 x 1.25 30 224501-6

125 / 150 / 180 230mm

M10 x 1.5 30 224502-4

M14 x 2 DIN 48 224515-5

100mm

100mm

Abrasive Disc (Hook & Loop Type)

Sanding Lock Nut

For wood, iron and steel.

For ModelDia.(mm) Grit Part No.

9564CVL

9564CVL

115

115

125125


•794594-280

240 •794597-6

•794598-440240 •794603-7

9565CVL9565CVL

Pad for Abrasive Disc(Hook & Loop Type)

Dia(mm) Part No.

9564CVL 115 743062-2

125 743061-4

For Model

9565CVL

26

For Abrasive Disk

• Used with Grinders

Wheel Cover

N9500N 154755-0165171-1

125266-2

135109-0Tool Less

--

-

-

-

-

-

• 135238-9 122885-5

9520B

9553HN, 9556HN, 9556HPGA4030, GA4034GA4030, GA40349563C, 9563HZ

For ModelSize Part No.Type

100mm

100mm100mm

100mm

100mm100mm

165362-4

135107-4

125267-0

122894-4

125097-9

125268-8122887-1

135242-8

Tool Less

Tool Less

Tool Less

Tool Less

122886-3135245-2

9521NB, 9564HZ, 9561C, 9564C, 9564CV9521NB, 9564HZ, 9561C, 9564C, 9564CV9521NB, 9564HZ, 9561C, 9564C, 9564CV

9554HN, 9557HN, 9557HP, BGA452Z / RFE

GA4530

GA4530

9564PC

9522NB, 9015B

9555HN, 9558HN, 9558HP, 9565HZ, 9562CR, 9565CV/CVL

GA5030, GA5034, GA5031, GA5011GA5030, GA5034, GA5031, GA5011

115mm

115mm

115mm

115mm115mm115mm

115mm

125mm

125mm

125mm

125mm

134961-3

135192-7

9016B

GA6010 150mm

150mm

180mm

180mm

180mm

230mm

230mm

230mm

164825-7

122889-7

135279-5

9607HB, GA7001

GA7050, GA7050R

GA7020, GA7030, GA7040S

164814-2

122891-0

154672-4

9609HB

GA9050, GA9050R

GA9020, GA9030, GA9040S

-

-

-

-

-

-

-

-

-

-

-

165053-7

192212-0

192475-8

N9500N

9553NB, 9556NB/PB, 9563/C/CV,GA4030

For cup type diamond wheel

GA9020, GA9030/S, GA9040S 194044-1

195250-1

For 100mm GrindersFor 100mm Grinders

193794-5B

B

C

A

A

For 115mm , 125mm Grinders -

For 115mm , 125mm Grinders

For 230mm Grinders

• Used with Grinders for dust collection

A B C

Dust collecting wheel guard

For ModelSize Part No.Type

27

9560/C,9561/C/CV, 9562/C/CV, 9563H/C/CV, 9564H/C/CV, 9564CVL, 9565H/C/CV/CVL, 9566C/CV

GA7010C,GA9010C

GA7020, GA7021,GA9020, GA7030/S, GA7040S,GA9030/S, GA9040S

193903-6

193956-5

194289-1

For Grinders

For Grinders

Part No.Suitable forDust Cover Attachment

A A

B

C

B C

3pcs/set

2pcs /set 2pcs/set

Type

Part No.Suitable for

125mm, 150mm, 180mm Grinders 152492-0

100mm, 115mm, 125mm Grinders 153489-2

180mm, 230mm Grinders 152539-0

GA5010, GA6010

9005B

153504-2

273503-9

151776-3

153504-2

• 194543-3

180mm, 230mm Grinders

180mm, 230mm Grinders (AVT grip)

180mm, 230mm Grinders (AVT grip)

GA5010, GA5011, GA6010, GA6011

• 162264-5

Grip

• AVT Grip

Grip

20100mm Grinders

100mm Grinders

115 / 125mm Grinders

180 / 230mm Grinders

DIN / OLD Type

20

28

782420-7

782401-1

35

28

782407-9

782412-6

782423-1

• Used with Grinders / Concrete Planers, Wall Chaser

Part No.For ModelLock Nut Wrench Size

Super FlangeSpindle Thread Part No.Outer Diameter (mm)

Outer Diameter (mm)

For Grinder size: 180mm, 230mm

47 192227-7

Safety Cutting FlangesFor Cut - Off Wheel, Extra large diameter.

Spindle Thread

N.B. Part No. 224257-1 for same size inner flange.

* Use with Lock nut 224543-0

For Grinder size: 180mm, 230mm

M14 X 2 (DIN)

M14 X 2 (DIN)

78 *224256-3 224257-1

Outer Flange Part No.

Inner Flange Part No.

For Depressed Center Wheel & Diamond WheelUse of the Super Flange makes it easy to remove the Grinding Wheel etc. after grinding operations. The lock nut can be removed with only about one third of the force required to remove a conventional inner flange. The method of installation and use are the same as for the usual inner flange.

28

Diamond WheelsSegmented Type:

Segmented Wave Type:This wheel has slits like the segmented wheel. Each segment has many notches (Wave). These notches ensure:• Fast cutting with less resistance.• Smooth debris removal.• Less loading on wheel.

Corrugated Type:This wheel has notches around the Rim. Has a characteristic between Continuous Rim and Segmented Type. Has faster cutting like Segmented Type. At the same time, can attain cleaner surface like continuous rim without broken edges.

Continuous Rim Type:Has layer of diamond with uniform thickness around the entire rim. Can maintain clean surface even on crusty, brittle materials. Cuts with accuracy but not as fast as segment type wheel.

Most commonly used. Blade has slits and alayer of diamond is sintered on the edges. Cuts faster than continuous rim type and maintainsaverage cutting surface.

The Makita Diamond Wheel Series offers Three types of wheel grades to meet user needs.

Electro Deposited Type:Diamonds are electro deposited and have more exposure than bonded type. Cuts faster and more efficient.

Features in terms of Shape

Material No. 5 Material No. 6

Hard concrete Granite Gneiss SmoothableEngineering

Brick Aggregate Block French Tile Asphalt Tile

Material No. 3

Cemented Tile Marble Unglazed Tile

Material No. 1

Material No. 2

Material No. 4

Sidewalk SlateEngineering BlockEngineering Block

Class 2

Concrete Block U-shaped Groove Sidewalk Block

Carbonaceous Shale

For Material

: Specially suitable, O: Suitable

Premium Range:This yields the highest performancein both cutting speed and durability

Medium Range:This achieves an optimum balancebetween performance and price.

Standard Range:This has the attraction of a reasonableprice tag.

29

125 1.9 7 22.23 20 Blue 125mm125mm100mm

A-01236

125 2 7 22.23 20 Blue 125mm • A-02808

230 2.2 7.5 22.23 - Gold 230mm • A-86826SegmentedSegmentedSegmentedSegmented Wave

Segmented Wave

Segmented WaveSegmented Wave

Segmented

Segmented

SegmentedSegmented

Segmented

SegmentedSegmentedSegmented

SegmentedSegmentedSegmentedSegmented

SegmentedSegmented

Segmented Dry

Dry

Dry

DryDryDry

DryDryDry

Dry

DryDryDry

Dry

DryDryDryDry

DryDry

DryDry

Segmented Wave

Segmented Wave

Segmented WaveCorrugatedCorrugated

Corrugated

Corrugated

CorrugatedCorrugated

CorrugatedCorrugatedCorrugatedCorrugated

CorrugatedCorrugatedCorrugatedCorrugatedCorrugated

Corrugated

CorrugatedCorrugatedCorrugatedCorrugatedCorrugated

Continuous RimContinuous Rim

Dry

DryDryDry

DryDry

Dry

Dry

DryDryDryDry

DryDry

DryDry

DryDryDry

DryDryDryDryDry

WetDry

105 2 7 20 16 Gold 100mm D-05197 Standard

Standard

StandardStandardStandard

Standard

StandardStandard


Standard

Standard

Standard

Standard

StandardStandard

Standard

Standard

StandardStandardStandardStandard

Standard

StandardStandard


Standard

StandardStandard

Standard

Premium

Standard

StandardStandard

Standard

Standard

MediumMedium

MediumMedium

Premium

Premium

PremiumPremium

-

125 2 7 22.23 20 Gold 125mm A-88901

180 2 7 25.4 22.23 Gold 180mm A-87909

115 1.9 7 22.23 -

-

-

-

-----

- -

--

-

---

----

--

-

--

- ---

- --

---

--

--

--

-

- - -

---

-

--

--

-

-

-

-

--

-

-------

-- --- -

- --

-- ---- -

-- -

-- ---

-

-

-

-

--

-

-

-

-

-

Gold 115m A-84109125 1.9 7 22.23 20 Gold 125mm A-84115150 2.1 7 22.23 - Gold 150mm B-06432180 2.3 7 25.4 22.23 Gold 180mm A-84121

230 2.5 7 22.23 - Gold 230mm A-84137105 1.7 7 20 16 Silver 100mm A-84090115 1.8 7 22.23 - Silver 115mm A-84006125 2 7 22.23 20 Silver 125mm A-84012180 2 6 25.4 22.23 Silver 180mm A-84028

230 2.2 6.5 22.23 - Silver 230mm A-84408

22.23 - Gold

22.23 - Gold

105 1.8 7.5 20 16 Gold 100mm B-03028

115 2 7.5 22.23 - Blue 115mm A-80422

125 2 7.5 22.23 - Blue 125mm A-80438180 2.2 7 22.23 - Blue 180mm A-83842230 2.5 7.5 22.23 - Blue 230mm A-80173125 2 7.5 125mm • B-02054

230 2.5 7.5 230mm B-02004

D T X H d 1 2 3 4 5 6Color For Model Part No Type

• It will be discontinued once the curtrent stock is over

125 2 7 22.23 20 Blue 125mm • A-02761

125 2 7 22.23 --

Blue 125mm • A-80690180 2 7 22.23 Blue 180mm • A-80709

105 2 7 20 16 Gold 100mm D-05206115 2 7 22.23 - Gold

O O

O O

O O

O O

O O

O O

O O

O

O

O

115mm A-84143

125 2.1 7 22.23 20 Gold 125mm A-84159

180 2.3 7 25.4 22.23 Gold 180mm A-84165

230 2.6 7 22.23 - Gold 230mm A-84171

105 2 7 20 16 Silver 100mm A-84040115 2 7 22.23 - Silver 115mm A-84056125 2.1 7 22.23 20 Silver 125mm A-84062180 2.3 7 25.4 22.23 Silver 180mm A-84078

230 2.6 7 22.23 - Silver 230mm A-84084115 2 7 22.23 - Silver O 115mm B-02967

125 2 7 22.23 20 Silver O 125mm B-02973

230 2.3 7 22.23 -

-

-Silver O 230mm B-01806

• A-88939

• A-88945• A-88951

A-86804

• A-88967

115 2.0 7

77

7

7

22.33 Gold 115mm

125 2.0 22.33 20 Gold 125mm180 2.0 25.4

25.4

22.3 Gold 180mm

22.23 Gold180 2.0 180mm

230 2.3 22.23 Gold 230mm

•••

•

••

-115 1.6 5.0 22.23 Gold 115mm A-89028

A-89012105 1.6 5 20 16 Gold 100mm

125105

2 7.5 22.23 20 Black1.8 7.5 20 16 Gold

• A-02200A-87149

x

D

d

HT

Diamond Wheels

30

Offset Diamond Wheel (Dry) / Diamond Cup Wheel

DApplication T X H d 1 2 3 4 5 6Color For Model Part No.

O OFor coarse grinding work 105 4 8 22.23 - -Silver 115mm, 125mm B-14629O O

X HD Part No.T d ColorMarble, sand stone and limestone115 - - Silver- 22.23 115mm D-25024Marble, sand stone and limestone180 - - Silver- 22.23 180mm D-25030

Electro Deposited Diamond Wheel / Standard Range

Ring

Segemented Type

Segemented Type

For Material For Grinders

• The protruding grit volume allows for easier cutting of marble, sand stone and limestone.• There is no heat generated therefore the cutting of material is quicker and easier.• Have a high grit density which gives a higher accuracy when cutting.

Best in cutting softer materials such as Resin board, Fiberglass, pipe etc

(H)Outer DiaType (D)Hole Dia Part No.Ring 20 22.23mm 20mm

Pakage10pc/set A-85248

d

H

31

x

D

d

HT

x

D

d

HT

• For rough cutting (coarse grinding work)• Fast material removal• Light weight• Long life

ONLINE VERSION V.13

Makita Gulf FZEP.O.Box , Jebel Ali Free Zone, Dubai - UAE.Tel. (971) 4 8860804 Fax. (971) 4 8860805

email:[email protected]

grinder catalogue

Documents

hn 9558hn100mm

cutoff wheel

depressed centre wheel

nb 9522nb100mm

powerful grinding

trim angle grinder

lock nut pin close

dust motorgenerates