grooved drum for continuous bulking and shrinkage - … · grooved drum for continuous bulking and...
TRANSCRIPT
ElEctronic conE winding machinEGrooved drum for continuous bulking and shrinkagE
ElEctronic conE winding machinE mod. Va
designed for continuous bulking and shrinkage of HB and acrylic yarns, also blended with elastomers and for the bulking of
woolen yarns
Winding speed from 250 to 1000 m/minute, shrinking rate from 0 to 30%
- the packages can be prepared with constant density for dyeing or waxed and be ready for knitting or any other application
- shrinking chamber with 4 spindles
- adjustable temperature and processing time of the yarn inside the shrinking chamber
- shrinking chamber with circulation of forced air heated by electric resistances
- shrinking and bulking with saturated steam coming from the external boiler (optional)
- count range from 3 to 50 Nm
- temperature of the shrinking chamber up to 130° C
D e s i g n e D f o r c o n t i n u o u s b u l k i n g a n D s h r i n k a g e
1. 3. 2. 4.
technical data
- electronic yarn feeder with adjustable yarn overfeeding - axial movement - machine configuration up to 40 spindles, with programmable control unit with digital display showing production and machine
operational data- The VA winder can simultaneously run at three different speeds and with three different lots of yarn- high precision electronic meter counter set to run up to six independent regulations- variable permanence time of the yarn inside the shrinking chamber, from 20 to 60 seconds - electronic anti patterning system programmable by the control panel - individual AC coaxial motor per spindle run by inverter - start/stop button - feeding creel with transfer-tail system - overhead package holder - Upon request, the Va winder can be supplied with overhead trolley blower and mesdan ats splicer
ElEctronic conE winding machinE
D e s i g n e D f o r c o n t i n u o u s b u l k i n g a n D s h r i n k a g e
Grooved drum for continuous bulkinG and shrinkaGe
2.
- Electronic yarn feeder with yarn overfeeding (+1% +50%) adjusta-ble from the programmable control unit. The machine can be program-med to run with three different overfeed levels.
- Self-cleaning motorized yarn tensioner
- optical yarn detection sensor - Micrometric slub catcher - Counter rotating motorized waxing
device
1.
gas controlled arm pres-
sure to accurately control the package density and tailstock with spring for axial compensation.
3.
Programmable control unit with digital display showing production and machine ope-rational data:- winding speed- electronic anti patterning
system- take-up package’s overfee-
ding rate %- meter counter- feeding speed increase - deceleration with adjustable
time and percentage- chamber’s temperature - permanence time of the yarn
inside the chamber with stopped spindle
- steam On/Off
4.
a)Pneumatic insertion of the yarn from the feeding package through a coiler and onto 4 moving ropes.
b)cooling area and treat-ment of the fumes.
a
b
bE.ma.tEx srl 13855 Valdengo (Biella) italY Via Quintino Sella, 50 Tel. +39 015 882110 r.a. Fax +39 015 881548 www.bematex-new.com - [email protected]
2160
306
1600
315539,5 539,5
2230 400
539,5
1623
tEchnical dataMachine configuration from 4 up to 40 spindles (n. 4 spindles per unit)Yarn traverse 6” (152 mm) - 8” (200 mm)
conicity biko - 0°00’ - 3°30’ - 4°20’ - 5°57’
Package’s diameter up to 290 mm maximum
Feeding package’s diameter up to 250 mm maximum
motorization and power supply per spindle
Individual AC coaxial motor per spindle, absorption 0,09 KwElectronic yarn winding feeder, 1 AC coaxial motor, absorption 0,09 KwShrinkage chamber’s feeder, 1 AC coaxial motor, absorption 0,09 KwCoiler 1 AC coaxial motor, absorption 0,11 Kw
Power supply of the shrinkage cham-ber (one unit of 4 spindles with electric resistances)
Kw 8,0
Power supply using vapour one unit of 4 spindles 18 kg vapour/hour: Kw 14
Power supply 400 V 3phase - 50/60 Hz
winding speed from 250 to 1000 m/min
grooved drums available 6” version (152 mm)82 mm ø, 2,5 turns variable pitch, crossover angle 19°95 mm ø, 2 turns variable pitch, crossover angle 22°95 mm ø, 2 turns constant pitch, crossover angle 23°
8” version (200 mm)90 mm ø, 2,5 turns constant pitch, crossover angle 24°90 mm ø, 3,5 turns constant pitch, crossover angle 18°90 mm ø, 3 turns variable pitch, crossover angle 22°
ElEctronic conE winding machinE Grooved drum for continuous bulking and shrinkagE