grow your industry resources your industry resources 2017 catalog books • cds • reports...

GROW YOUR INDUSTRY RESOURCES

2 0 1 7 C ATA L O G

Books • CDs • ReportsConference ProceedingsPublications • eLearning

Standards & TIPs

Covering the pulp, paper, packaging, nonwovens and related industries

Submit your papers to TAPPI Journal!

PEER REVIEWED

• Distinguished researchers and industry experts evaluate papers for scientific merit, creativity, and innovation

PROMINENT VISIBILITY

• A well-respected, frequently referenced source of the best industry research for more than 60 years

CIRCULATED MONTHLY

• Delivers the most current and relevant research available in the industry, with global reach

Submit Your Research Today! www.tappi.org/TJsubmit

SPECIAL

NANOTECHNOLOGY

CONTENT

WWW.TAPPI.ORG JOURNALTHE PAPER AND PACKAGING INDUSTRIES’ TECHNICAL RESOURCE JUNE 2016 | VOL. 15 NO. 6

SPECIAL FEATURE 358Research pathways and outreach to drive cellulosic nanomaterials developmentKathleen M. Bennett

CELLULOSE NANOCRYSTALS 363Ionic strength control of sulfated cellulose nanocrystal suspension viscosityStephanie Beck and Jean Bouchard

MICROFIBRILLATED CELLULOSE 375A comparative study of enzymatic and Fenton pretreatment applied to a birch kraft pulp used for MFC production in a pilot scale high-pressure homogenizerPia Hellström, Anette Heijnesson-Hultén, Magnus Paulsson, Helena Håkansson, and Ulf Germgård

CELLULOSE NANOCRYSTALS 383Critical discussion on the thermal behavior of sulfated cellulose nanocrystalsGregory Chauve, Damien Mauran, Carole Fraschini, and Jean Bouchard

PAPERMAKING 395Effects of cellulosic nanofibrils on papermaking properties of fine papersDonna A. Johnson, Mark A. Paradis, Michael Bilodeau, Bruce Crossley, Marc Foulger, and Pierre Gélinas

MICRO & NANOFIBRILLATED CELLULOSE 405Rheological investigation of complex micro and nanofibrillated cellulose (MNFC) suspensions: Discussion of flow curves and gel stabilityMichel Schenker, Joachim Schoelkopf, Patrice Mangin, and Patrick Gane

CELLULOSE NANOFIBRILS 419Effects of mechanical fibrillation time by disk grinding on the properties of cellulose nanofibrilsQianqian Wang and J.Y. Zhu

HEALTH & SAFETY 425Toward cellulose nanomaterial commercialization: Knowledge gap analysis for Safety Data Sheets according to the Globally Harmonized SystemJo Anne Shatkin, Kimberly J. Ong, James D. Ede, Theodore H. Wegner, and Michael Goergen

SPECIAL P

ULPIN

G and

ENGINEERIN

G CONTENT

FEATURING RESEARCH FROM THE:

2015 PEERS Conference

WWW.TAPPI.ORG JOURNALTHE PAPER AND PACKAGING INDUSTRIES’ TECHNICAL RESOURCE MARCH 2016 | VOL. 15 NO. 3

FIBER SUPPLY 148Status update on development of a eucalyptus plantation program in the southeastern United States and higher elevations of southern BrazilPeter W. Hart, John Johnson, and Ricardo Paim

FIBER SUPPLY 159Potential of C. citriodora wood species for kraft pulp productionTiago E. S. Segura and Francides G. da Silva, Jr.

BLEACHING 167Impact of dissolved lignin in oxygen delignification and chlorine dioxide stages Caroline Wilke, Niclas Andersson, Rick van Fleet, Akhlesh Mathur, and Ulf Germgård

BLEACHING 178Revised steady-state model for chlorine dioxide brightening that considers extraction washer carryover effectsBrian N. Brogdon

RECOVERY CYCLE 187Improving recovery boiler availability through understanding fume behaviorAino Leppänen and Erkki Välimäki

RECOVERY CYCLE 195Formation of blue deposits in kraft recovery boilersXiaosong Mao and Honghi Tran

RECOVERY CYCLE 205Ring removal in rotary kilns used by the pulp and paper industryJ. Peter Gorog and W. Ray Leary

BIOREFINERY 215Treating kraft mill extract using bipolar membrane electrodialysis for the production of acetic acidRavikat Patil, Joseph Genco, Hemant Pendse, and Adriaan van Heiningen

A Word from TAPPI President Larry N. Montague

Whoever thinks growing older means slowing down doesn’t know TAPPI.

As we completed our 101st year in 2016, TAPPI continued its efforts to offer members the finest educational resources, research, and networking opportunities around the globe. I am pleased to report we did not disappoint.

In another first this year, RISI, one of the most respected providers to global forest products industry information, merged its Pulp and Paper International publication with TAPPI’s Paper360º. Already the industry’s leading publication, this partnership ensures that TAPPI members will receive only the most timely and critical news, along with interviews, mill case

studies, and topical feature articles.

Following on the heels of yet another successful PaperCon in May, which attracted the most mill attendees in its history, a new event was created. Tissue 2017 Conference and Expo will be held in Miami, FL October 3 - 6 and bring together TAPPI technical content with RISI expertise. Featuring the latest market trends, grade expectation and competitive data for the North American Tissue market, it has all the hallmarks of being yet another ground-breaking event.

Every four years, TAPPI, along with AICC, holds SuperCorrExpo, a premier event that showcases industry products and services. This year, the event was relocated for the first time to Orlando, FL, to help facilitate international participation. With more than 5000 attendees and 325 exhibitors, I am proud to report – mission accomplished!

During 2016, TAPPI also expanded its eLearning courses. Added this year were paper manufacturing, pulping, and development programs structured in flexible, convenient formats. On the 2017 horizon is a Tissue Certification Program featuring a combination of face-to-face and online classes. Once completed, this course is designed to ensure a basic level of tissue-making knowledge is achieved.

And, speaking of online improvements, TAPPI continued its efforts to refine and enhance our newly redesigned website. Responding to member input, we incorporated “faceted filtering” in the search component, which helps narrow or broaden searches via a new taxonomy. TAPPI Connect, our secure, online forum for communication, networking and problem-solving, continues to grow in user numbers. If you have not yet benefitted from this amazing collaborative tool, I strongly encourage you to see how it helps support day-to-day work strategy.

Finally, I am perhaps most proud to report that in 2016 TAPPI achieved all of its fiscal year goals. Especially gratifying is that we expanded our global presence to 66 countries, and more than 2,600 new members. With over 8,800 total members, we grew nearly seven percent over the previous year, and achieved the highest membership numbers since February 2008.

Thanks to all our members and supporters who helped make 2016 such a successful year. With your continued involvement, I believe “the best is yet to come.”

Sincerely,

Larry N. Montague

TAPPI President & CEO

4 Become a TAPPI Member • www.tappi.org/join • +1 770 446-1400 or 1 800 332-8686 (US) • 1 800 446-9431 (Canada)

PAPER MANUFACTURING ONLINE COURSES

COURSE FORMAT: Comprehensive videos and figure based visuals presented by subject matter experts.

© Paper Coating Technology Printing methods for coated grades of paper and board, impact of pigment selection, chemistry and properties of starch and protein binders, materials and equipment. 26 Learning Modules Item Code: ELN-007 • Member: $950 • List: $1,235

© Paper Machine Optimization Intermediate in scope, designed for more experienced operators. Topics concentrated on wet end operations and pressing and dry end operations. 56 Learning Modules Item Code: ELN-009 • Member: $950 • List: $1,235

© Paper Manufacturing Technology A comprehensive overview of papermaking technology, process variables, equipment and terminology. 33 Learning Modules Item Code: ELN-001 • Member: $950 • List: $1,235 © Wet End Chemistry Papermaking materials, including fillers and chemical additives and how chemicals are used to control product attributes and improve process efficiency. 31 Learning Modules Item Code: ELN-006 • Member: $950 • List: $1,235

COURSE FORMAT: Concise narrated animation of components and processes.

© Broke SystemsThis course includes: broke cleaning and screening, broke repulpers, broke system inventory management and under-machine repulpers. 5 Learning ModulesItem Code: ELC-011 • Member: $375 • List: $485

© Chemical AdditivesThis course includes: starch cooking and wet end chemistry. 4 Learning ModulesItem Code: ELC-012 • Member: $300 • List: $390

© ConvertingThis course includes: sheeting of paper, palletizing and paper ream packing.3 Learning ModulesItem Code: ELC-026 • Member: $225 • List: $290

© Dry End Equipment This course includes: calendering, carrier copes, QCS Scanners, paper coating, reel systems, tail threading and web guiding and spreading. 11 Learning Modules Item Code: ELC-013 • Member: $825 • List: $1,025

© Finishing This course includes: winding, pulp drying and baling and roll handling and wrapping. 4 Learning ModulesItem Code: ELC-014 • Member: $300 • List: $390

© FormingThis course includes: forming fabrics, fourdriniers, twin-wire formers, sheet formation and wet edge control.8 Learning ModulesItem Code: ELC-015 • Member: $600 • List: $780

© General Papermaking This course includes: general papermaking processes, as well as doctor blades, safety and steam theory. 6 Learning Modules Item Code: ELC-016 • Member: $450 • List: $585

© HeadboxesThis course includes: air-padded headboxes, hydraulic headboxes and stock jet geometry.4 Learning Modules Item Code: ELC-017 • Member: $300 • List: $390

© Paper Machine Auxiliary SystemsThis course includes: auxiliary systems in the paper machine process, such as hydraulic systems, lubrication systems, drives and vacuum systems. 8 Learning ModulesItem Code: ELC-018 • Member: $600 • List: $780

© Paper Machine DryersThis course includes: dryer felts, alternative drying systems, cascade steam systems, dryer hoods, size presses and thermocompressor steam systems. 8 Learning ModulesItem Code: ELC-019 • Member: $600 • List: $780

© Paper Properties and TestingThis course includes: paper and board physical tests, optical tests, strength tests and process testing. 4 Learning ModulesItem Code: ELC-020 • Member: $300 • List: $390

© Stock ApproachThis course includes: centrifugal cleaners, deaeration, thin stock screening and thin stock system design. 4 Learning Modules Item Code: ELC-021 • Member: $300 • List: $390

© Stock PreparationThis course includes: high consistency refining, high density cleaners, refining, thick stock system design and ph and consistency control. 5 Learning ModulesItem Code: ELC-022 • Member: $375 • List: $485

© Storage and ShippingThis course includes: preventing paper roll damage, storage and tracking, truck trailer loading and railcar loading.5 Learning ModulesItem Code: ELC-023 • Member: $375 • List: $485

© Wet PressingThis course includes: felt cleaning and conditioning, suction rolls and roll covers, roll presses, shoe presses, steam boxes and wet pressing theory. 7 Learning Modules Item Code: ELC-024 • Member: $525 • List: $680

© White Water and Filtrate SystemsThis course includes: DAF Systems, strainers and filters, circulation loops, clarification and white water system design.6 Learning Modules Item Code: ELC-025 • Member: $450 • List: $585

Visit tappi.org/elearning to view course descriptions and previews.

Online Training available for Individual Users as well as

Company Licenses. Choose to purchase a complete course or a specific topical course module. For more information contact Jana Jensen, Press Manager

at [email protected].

PULP MANUFACTURING ONLINE COURSES


© Chemical Recovery Includes chemical recovery operations, terminology, equipment and process variables. 12 Learning ModulesItem Code: ELN-004 • Member: $950 • List: $1,235 © Environmental Control U.S. Environmental laws and regulations, air emission compounds and sources, air treatment options, activated sludge and aerated lagoon operation.10 Learning ModulesItem Code: ELN-005 • Member: $950 • List: $1,235

© Pulp Manufacturing TechnologyOverview of pulping, pulp processing and bleaching technology, process variables and equipment. 26 Learning ModulesItem Code: ELN-003 • Member: $950 • List: $1,235

© Technology and Science of Paper Recycling Review of recycling processes and issues, including quality of the raw materials, requirements to be environmentally friendly and strategies to produce pulp at the lowest cost. 34 Learning Modules Item Code: ELN-008 • Member: $950 • List: $1,235


© BleachingThis course includes: alkaline extraction, bleaching equipment, sequences and filtrate recycling, chlorine dioxide generation and oxygen delignification. 11 Learning ModulesItem Code: ELC-027 • Member: $825 • List: $1,025

© EnvironmentalPulping and papermaking involves many industrial processes that require the safe handling of chemicals, gases, and water. This course includes: CNCG Systems, contaminated condensate systems, HVLC Systems and wastewater systems.6 Learning ModulesItem Code: ELC-028 • Member: $450 • List: $585

© EvaporatorsThis course includes: black liquor evaporator operations, equipment, principles and testing. 5 Learning ModulesItem Code: ELC-029 • Member: $375 • List $485

© Fiber SupplyThis course includes: log handling and chip storage, chip screening, paper fiber sources and wood properties and chip quality testing. 4 Learning ModulesItem Code: ELC-030 • Member: $300 • List: $390

© Kraft PulpingThis course includes: batch cooking, blow line refining, brown stock systems, digesters and kraft pulping by-products.12 Learning ModulesItem Code: ELC-031 • Member: $900 • List: $1,170

© RecaustThis course includes: dregs washing, electrostatic precipitators, exhaust gas scrubbers, green liquor clarifiers, lime kilns, lime mud filtering, slaking and causticizing and more. 12 Learning ModulesItem Code: ELC-032 • Member: $900 • List: $1,170

© RecoveryThis course includes: fluidized bed boilers, kraft recovery boilers and baghouses.9 Learning modules Item Code: ELC-033 • Member: $675 • List: $877

© Supplemental and Recycled FiberThis course includes: OCC and supplemental and recycled fiber processes.13 Learning ModulesItem Code: ELC-034 • Member: $975 • List: $1,267


Online Training available forIndividual Users as well as Company

Licenses. Choose to purchase a complete course or a specific topical

course module. For moreinformation contact Jana Jensen,

Press Manager at [email protected].

To order, visit www.tappi.org/bookstore or call +1 770 446-1400 • Fax +1 770 209-7206 • 1 800 446-9431 (Canada) 5


CORRUGATED PACKAGING ONLINE COURSES


© Board TestsThis course describes tests used to predict the stacking performance of corrugated board boxes, performance of corrugated boxes during handling and tests used to monitor corrugating and converting operations at box plants. Single ModuleItem Code: ELC-006 • Member: $100 • List: $130

© Box Plant Equipment BasicsThis course introduces some common box plant equipment and processes, and discusses equipment layout, material flows, and storage considerations in box plants. Single ModuleItem Code: ELC-009 • Member: $100 • List: $130

© Corrugated Box BasicsThis course will familiarize you with some common industry terms, describe popular corrugated board and corrugated box styles and discuss corrugated box usage considerations. Single ModuleItem Code: ELC-001 • Member: $100 • List: $130

© Corrugating AdhesivesThe objective of this course is to impart an understanding of a brief history of corrugating adhesives, then describes the purpose or function of the ingredients in modern, starch-based corrugating adhesives. Single ModuleItem Code: ELC-008 • Member: $100 • List: $130

© CorrugatorsThis course includes: wet end components, preconditioning and preheating, corrugating and pressure rolls, adhesive application, double facer glue unit and hot plate section, dry end components, stacker and double and triple wall corrugators. Single ModuleItem Code: ELC-005 • Member: $100 • List: $130

© Die CuttersThis course describes corrugated board and box making equipment, design and operation of rotary and platen die cutters, as well as in-line sectional die cutter machines. Single ModuleItem Code: ELC-007 • Member: $100 • List: $130

© Flexo Folder-GluersThis course describes the design and operation of the machine sections including: the feed section, printing section, creaser-slotter, die cutter, glue lap unit, folding section and delivery end. Single ModuleItem Code: ELC-010 • Member: $100 • List: $130

© Other Box Plant EquipmentThis course describes the design and operation of box plant equipment, including printer-slotters, folder-gluers, stitchers, tapers, laminators, presses, litho-laminators, bundlers and palletizers.Single ModuleItem Code: ELC-002 • Member: $100 • List: $130

© Raw MaterialsThis course describes wood fiber sources, chemical pulping and papermaking processes, and various glues, inks and coatings used in the production of corrugated board and corrugated boxes. Single ModuleItem Code: ELC-004 • Member: $100 • List: $130 © SafetyThis course will discuss safe work behaviors, equipment safety hazards, stored energy hazards, chemical hazards, emergency stops, as well as vehicle and pedestrian hazards within box plants. Single ModuleItem Code: ELC-003 • Member: $100 • List: $130


Online Training available for Individual Users as well as

Company Licenses. Choose to purchase a complete course or a specific topical course module. For more information contact Jana Jensen, Press Manager

at [email protected].

Corrugated Packaging Box Plant BasicsFundamental corrugated packaging and box training including corrugated material manufacturing and converting processes. This fundamental course includes both equipment and process descriptions as well as performance testing and plant safety. 10 Learning ModulesItem Code: ELC-CORR • Member: $600 • List: $780

TISSUE MANUFACTURING ONLINE COURSES


© Tissue Manufacturing TechnologyCourse includes: tissue properties, chemicals and machine technology: headboxes, forming, drying, molding, creping, calendering and converting. 26 Learning ModulesItem Code: ELN-002 • Member: $950 • List: $1,235

© TAPPI Tissue 101: Processes & Properties Introductory course designed to increases understanding of tissue performance properties and manufacturing. Includes comprehensive overview of the manufacturing process and effect on product performance properties.Inquire for pricing.Professional Certificate available.

© TAPPI Tissue 201: Operations & RunnabilityIntermediate-to-advanced level course designed to improve tissue quality and consistency including understanding of what contributes to waste and downtime. Course includes: reliability, maintenance best practices and how to troubleshoot problems quickly. 13 Learning ModulesProfessional Certificate available.Item Code: ELT-T201 • Member: $750 • List: $975

© Tissue Manufacturing Operations and Runnability Professional CertificateTAPPI Professional Certificates are developed by industry practitioners, TAPPI Members who understand the knowledge and experience that is expected for superior performance in the global forest products, pulp, paper, tissue, packaging, and associated industries. Completion of this Professional Certificate will demonstrate competency in critical tissue manufacturing knowledge, skills and abilities including: Improving overall tissue machine efficiency; Increasing production; and enhancing product softness and bulk.TAPPI certificate programs:• Assure employers and clients of subject mastery• Follow a vigorous peer-review process, ensuring the highest quality results.Inquire for pricing.

Review full product descriptions, tables of content and previews at www.tappi.org/eLearning.

Online Training available for Individual Users as well as Company Licenses. Purchase a complete course or a specific topical course module. For more information contact Jana Jensen, Press Manager at [email protected].


TRAINING PACKAGE INCLUDES THE FOLLOWING PREMIERE COURSES BY MATRA ENGINEERING: Approach Flow, The Headbox, Dewatering, Press Section, Dryers & Hood and Wet End Chemicals

INTERACTIVE COURSE FORMAT: User driven animations and narration including process simulation.

Operators Training Package available to Companies on an annual site license basis.

Contact [email protected] for more information.

PAPER MACHINE TRAINING PACKAGE


BEST SELLERS2017 TAPPI PRESS

CORRUGATED Corrugated Containers Manufacturing Process

This comprehensive textbook describes the entire process of manufacturing corrugated containers. It is designed to provide in-depth explanations and information for professionals working in all areas of the corrugated containers industry.Item code: 0101R281 • Member: $75 • List: $115

Corrugating Defect / Remedy Manual, Sixth Edition This manual provides a basis for common knowledge of terms, definitions and methods of correction of corrugated operational defects.Print – Item code: 0101R153 • Member: $100 • List: $145CD – Item code: 0101R153CD • Member: $87 • List: $130

More Than A Box: Box Plant 101 – DVD or Electronic Video Learn the corrugated manufacturing process from seedling to box. This self-paced, training/instructional video takes you through each stage for producing a quality box. This must-have resource includes comprehensive questions to ensure the students learn

and understand the process.DVD – Item code: 0101R338 • Member: $114 • List: $154Video – Item code: 0101R334 • Member: $114 • List: $154

Corrugated Adhesives Preparation, 5th EditionThis informative and straight-forward, user friendly manual provides the box plant with a practical and useful tool to make better starch adhesives as well as see better bond quality. It is easy to understand and is a “must have book” for anyone operating a corrugator. This publication

has been recommended to be placed in the corrugator’s dry end control room where it will be used to trouble shoot problems as they occur.Item code: 0101R301 • Member: $100 • List: $150

NANOTECHNOLOGY Production and Applications of Cellulose NanomaterialsThe discovery of the properties and performance of cellulosic nanomaterials has accelerated, yet most scientists and government bodies are unaware of their existence. This best seller is intended

to bring together current leading-edge knowledge on cellulosic nanomaterials from worldwide expert sources. The scope and

breadth of the information outlined in this book span the range of cellulosic nanomaterials research, process and product development, and commercial exploitation and include standards development and environmental, health, and safety issues. Item code: 0101R332 • Member: $215 • List: $275

NONWOVENSNonwovens: Theory, Process, Performance and Testing

Written by experts in the field of nonwovens development, engineering, and manufacture, this book can be used by industry and academia alike. As each chapter progresses from basics to advanced concepts, readers with any level of will derive value from this book. Contents include: overview of nonwovens;

nonwoven terminology; polymer chemistry and physics; capillarity and surface phenomena; nonwoven engineering principles; wet-laid systems; dry-laid systems; polymerlaid systems; filtration theory & applications; and absorbency and testing.Item code: 0101R199 • Member: $86 • List: $128

FLEXIBLE PACKAGING & EXTRUSIONThe Ultimate Roll and Web Defect Troubleshooting Guide

Receiving international recognition by web producing and converting industry experts around the world, this book is referred to as the most comprehensive reference guide available for troubleshooting roll and web defects A must have communication tool for suppliers and their customers to assist in the

identification and elimination of roll and web defects. It is not just a dictionary on defects, but also gives practical and logical advice on what the cause of the problem is and how to stop the problem.Print – Item code: 0101R335 • Member: $159 • List: $240Ebook – Item code: 0101RWELECT • Member: $159 • List: $240PURCHASE AS A SET!Item code: 0101RWELECTBUN • Member: $239 • List: $299


1. Online at www.tappi.org/bookstore2. By email to [email protected]. Fax +1 770 209-72064. By phone: please contact TAPPI’s Member Connection Center at +1 800 332-8686 (US), +1 800 446-9431 (Canada) or +1 770 446-1400 (Worldwide).

WAYS TO ORDER

Film Extrusion Manual, Second EditionThis book can be used as a stand-alone training resource for all levels of professional and operations personnel working in the plastics film industry including: plastic film manufacturing, converting, equipment suppliers and polymer suppliers. It focuses on the technology and science of polymer film extrusion

and can be used to learn the basics of applied extrusion theory, as well as provide troubleshooting guidelines and solutions to many common problems encountered in the fabrication of thermoplastic films.Item code: 0101R313 • Member: $157 • List: $205

The Mechanics of Web Handling Applicable to any web including paper, film, foil, nonwovens, and

textiles, this unique book covers many aspects of web handling for manufacturing, converting and printing. Designed for product, process, and maintenance engineers responsible for web machinery, readers will understand better how to design and operate machinery to avoid wrinkles, web breaks, registration,

guiding and other types of costly web problems.Item code: 0101R273 • Member: $86 • List: $112

The Mechanics of Rollers This unique book combines the science of web handling with the application of rollers and covers design, application, and maintenance for rollers of all sizes, shapes, and webs. This is a valuable, comprehensive, easy-to-use reference book containing hundreds of figures, tables and design equations, plus bibliography, glossary and index.

Item code: 0101R255 • Member: $75 • List: $112

PULP/WOOD PRODUCTS PAPERMAKING/ENGINEERINGNEW! The Handbook for Pulp and Paper Technologists (The SMOOK Book), Fourth EditionBy far the best-selling text to introduce the entire technology of pulp

and paper manufacture. The book features 27 chapters covering all aspects of pulping and papermaking. Hundreds of illustrations, charts and tables help the reader grasp the concepts being presented. The fourth edition features additional material on secondary fiber recovery and utilization, mechanical pulping, kraft

pulping and bleaching and papermaking.Item code: 0202SMOOK4 • Member: $95 • List: $123

The Handbook of Pulp and Paper Terminology: A Guide to Industrial and Technological Usage, Second Edition

Designed as a companion volume to Handbook for Pulp & Paper Technologists, this dictionary contains more than 9,000 references, defines pulp and paper technological terms, and is a necessity for the newly employed mill employee as well as consultants and suppliers who directly interact with the industry.

Item code: 0202TERM • Member: $69 • List: $79

Purchase Both and SaveItem code: 0202SMSET4 • Member: $140 • List: $175

Chemical Recovery in the Alkaline Pulping Processes, Revised Edition

An introduction to the Principles of Chemical Recovery, Evaporation and Concentration of Black Liquor, Noncondensible Gases, Tall Oil Soap Recovery, Chemical Recovery and Process Chemistry, Chemical Recovery Equipment, Cooking Liquor Preparation and Lime Reburning: The Rotary Lime Kiln and much more.

Item code: 0102B046 • Member: $86 • List: $115

The Bleaching of Pulp, 5th Edition The premiere industry text on bleaching technologies. Focused on modern industrial processes with less emphasis on fundamental science, this book provides comprehensive information on the technology used to bleach wood pulps. A must have for your resource library.Item code: 0101R331 • Member: $175 • List: $232

Fundamentals of the Kraft Recovery Process If you are a practicing pulp engineer wanting to know more about the kraft recovery process, this is the book for you. It provides comprehensive information on the technology used to bleach wood pulps. Each kraft recovery unit operation, including multiple effect evaporation, recovery boiler operations, green liquor

processing, causticizing and white liquor processing is discussed in detail.Item code: 0101R327 • Member: $195 • List: $237

Principles of Wet End Chemistry An introductory overview and valuable reference tool for everyone involved in wet end chemistry.Item code: 0101R241 • Member: $50 • List: $70

Starch and Starch Products in Surface Sizing and Paper Coating

A comprehensive overview of the various aspects of starch use in surface sizing and coating, this book serves as a learning aid. It provides guidance to engineers, operators, and managers in the paper industry and includes an explanation of the objective pros and cons of different available alternatives.


The Pulp and Paper Technology Advanced Workforce Training and Education Series, Volume 1: Pulp Manufacturing

Tackle the “how” and “why” of pulp making. Topics include wood fiber fundamentals, overviews of the pulp mill, wood prep, kraft pulping, mechanical pulping, chemical recovery, bleaching and more! Item code: 0101R317 • Member: $50 • List: $60

The Bleaching of Pulp5th Edition

Peter W. HartAlan W. Rudie

Editors

Customers have 30 days from the date of purchase to notify TAPPI of item(s) not received. TAPPI is not liable

for items not received after 30 days.


The Pulp and Paper Technology Advanced Workforce Training and Education Series, Volume 2: Paper

Manufacturing An overview of the paper mill as well as the entire papermaking process from stock preparation to pressing and drying. Topics include: wet end chemistry, paper machine wet end, size press operation and coating operation.


Purchase the SetItem code: 0101R317SET • Member: $90 • List: $125The Pulp and Paper Technology book series is a new industry resource for improving the knowledge base of new and incumbent hourly workers. A resource developed jointly with TAPPI and the community college network (npt)2 . This series complements the two-year associate curriculum at (npt)2 community colleges.

TISSUETowel and Tissue Papermaking CD

This highly interactive, self-paced CD informs participants on the subject of towel and tissue papermaking terms, concepts, and processes. It explains how the manufacturing of towel and tissue grades of paper is different from other grades of paper, describes the different types of tissue formers and explains the TAD process and its advantages and disadvantages.

Item code: MPP-15 • Member: $78 • List: $119

Winding Machines: Mechanics and MeasurementsThis three-part book (with supplemental CD) describes the various classes and arrangements of winding machinery commonly found in the web industries. Written in everyday language, it describes the machines we work with, the defects we see and the many measures of roll quality.

Item code: 0102B068 • Member: $175 • List: $229

Winders: The Complete Guide for Paper Mills and Converters

This comprehensive book is a complete winder training, applications, and product buying guide. This helpful text shows readers how to analyze, select, implement, and improve a winding operation. By describing and illustrating the various types of winders, the book can help readers determine the best winding method for their particular materials.

This valuable industry resource will be useful to everyone involved in the winder process area, including engineers, production managers, maintenance managers, and other technical and production staff. Winder manufacturers and industry consultants will also find this unique book to be a valuable resource.Item code: 0101R274 • Member: $64 • List: $96

STANDARDS & TIPSTAPPI Standards, TIPS and Useful Methods Online On demand – Anytime, Anywhere – Up to Date InformationTAPPI Standards, TIPs and Useful Methods Online Subscription gives you point-and-click access, providing immediate answers anytime problems arise. TAPPI Standards may be in the form of Test Methods or as other documents that have been developed through the consensus of a technical working group (defined in the guidelines as Standard-Specific Interest Groups) acting in accordance with the procedures described in the guidelines. TAPPI Technical Information Papers (TIPs) are documents containing specialized information used in the manufacture, evaluation and description of pulp, paper, and related products, written in a standardized format which is readily useable by the industry. TIPS may contain testing procedures or methods used to evaluate equipment but do not contain pulp and paper testing procedures or test methods.Item code: IND-LICENSE • Member: $250 • With Membership: $125 • List: $485Also available on CD: STUCD-17 • Member: $175 • List: $619

*TAPPI does not engage in activities or publish Standards that could lead to standardization of products or services in ways that would reduce competition, impede the development of improvements to those products or services, or would result in a stabilization of costs for those products or services.

Company License - immediate access to 500+ individual Standards and TIPs. • Total, instant access for all employees at any time; always up to date. • No need to purchase separate copies. • Print or share any of the documents internally without having to obtain copyright release.

Contact Alisa Sanders at 770-209-7277; [email protected]

AN INVITATION…TAPPI PRESS invites YOU to Become a Published Author

For more information, visit www.tappi.org/author


http://www.tappi.org/Get-Involved/ Speaker-Author/Copyright-And-Permissions

NEW & COMING SOON2017 TAPPI PRESS

NEWBack in Print!Corrugator Bonding: A TAPPI Press Anthology of Published Papers, Second Edition

Back in print for the first time in more than10 years! This is a revision of the 1997 TAPPI PRESS Anthology of the same title. This anthology includes the work of researchers around the world on corrugator bonding and gives a better understanding of research findings on the properties of linerboard and corrugating medium as well

as the variables that contribute to improved bonding. “The Corrugator Bonding Anthology is an unsurpassed resource for anyone who wants an introduction as well as insight into the corrugated world. It will never be outdated.” - Jon Porter, Senior Instructor/Process Specialist, JPorter ConsultingItem code: 0101R265 • Member: $75 • List: $97

Fundamentals of Electrospinning& Electrospun Nanofibers

This NEW, comprehensive reference analyzes the methods whereby nanofibers are spun, collected and fabricated into various fibrous structures. Practical information is focused on understanding and designing devices to fabricate nanofibers with many different shapes and internal structures. The text explains the workings, quantitative

specifications and set-up of virtually all formation technologies, including solvent and solvent-free, as well as needle and needleless spinning methods for nanofibers made from polymers, carbon and other materials. Special attention is given to strategies for overcoming defects in nanofibers and controlling their overall quality. Additional references, illustrations, charts, data, and useful calculations are included on nearly every page. “This book will be useful both to students…and those researchers who actively work in materials science and engineering, nanotechnology, fibers and textiles…I am confident it will be a valuable resource to promote the development of various electrospun nanofibers and yarns for practical applications.” - From the Foreword by Liming Dai, Case Western Reserve UniversityItem code: 17ELECTRONANO • Member: $125 • List: $139

Boiler and Cooling Reference Seriesby Colin Frayne These comprehensive references are the most practical field guides ever written on steam and boiler water treatment. This two-volume set analyzing the whole spectrum of boiler and cooling systems, including those used in residential complexes, commercial and institutional buildings, and industrial facilities. “After being recommended by a friend several years ago, I looked into the Boiler and Cooling reference books by Colin Frayne and found them to be a useful tool for anyone involved with the primary utility areas of a paper mill or power plant. The set is comprised of some of best information available through several industry sources, the material is comprehensive, and the subject matter is presented in a well thought-out format. If you are looking for a reference book on water treatment associated with the boiler and cooling applications, this is a good set to have.” - Jim Graham, Manager - Paper Industry Utilities

Boiler Water Treatment Principles and Practice

Volume 1: Boiler Basics and Steam Water ChemistryItem Code: 16BOILER1 • Member: $125.00 • List: $135.00 Volume 2: Treatments, Program Design, and ManagementItem Code: 16BOILER2 • Member: $125.00 • List: $135.00 Charts and Notes for Field Use Item Code: 16BOILER3 • Member: $ 65.00 • List: $75.00

Cooling Water Treatment Principles and PracticesCooling Water Treatment: Principles and Practice Item Code: 16COOL1 • Member: $215.00 • List: $225.00 Charts and Notes for Field Use Item Code: 16COOL2 • Member: $ 35.00 • List: $45.00


IDCON’s MaintenanceManagement Book SeriesIDCON Reliability and Maintenance Management Consultants, has developed a unique collection of books for the Pulp and Paper Industry. These books focus on the practical, hands-on practices and techniques that improve your knowledge in reliability and maintenance. For more information on this series, go to www.tappi.org/idconbooks.

Reliability-focused Spare Parts & Materials Management BookThis book challenges, motivates and educates readers in reliability based spare parts and materials management and is based on IDCON Results Oriented Reliability & Maintenance philosophy which emphasizes

achieving results through people, execution and common sense.Item code: 10RSPMM • Member: $59 • List: $74

Preventive Maintenance Essential Care and Condition Monitoring Manual The 337 page preventive maintenance manual describes how to set up a cost effective preventive maintenance system and contains preventive maintenance methods and tools for common components.

Item code: 10PMEC • Member: $135 • List: $155

Maintenance Planning and Scheduling Book Maintenance planning and scheduling is the hub for a high performance maintenance organization. The maintenance book covers key processes within maintenance planning and scheduling in detail.

Item code: 10MPSB • Member: $109 • List: $130

Results Oriented Reliability & Maintenance Management BookThis Management book covers Maintenance and Reliability management described in a series of short studies. Christer Idhammar explains how operations and maintenance must work together to achieve best

practice maintenance and reliability management. Item code: 10RPRMM • Member: $105 • List: $135

Maintenance Books Small ComboThe small combo includes three maintenance books: • Preventive Maintenance Essential Care and Condition Monitoring Book• Maintenance Planning and Scheduling Book• Results Oriented Reliability and Maintenance Management Book A unique collection of books developed by reliability and

maintenance management consultants who have worked in the Pulp and Paper Industry. These books focus on the practical, hands-on practices and techniques that improve your knowledge in reliability and maintenance.Item code: 10MAINSET Member: $309 • List: $329

COMING SOONExtrusion Coating Manual, Fifth Edition This completely revised and updated fifth edition manual is the culmination of years of work by more than 50 well-known industry experts from around the world and contains 56 sections within seven chapters. This NEW, fifth edition represents a dramatic modernization in technology over the

previous fourth edition, published in 1998, with an additional 17 contributors and 20 more sections. Since the fourth edition, advances in computer design and machining, resin technology, and coextrusion technology have all advanced to the point that extrusion coating and laminating now compete with traditional rigid materials in many packaging markets. These advances have increased productivity, reduced waste, and provide more product options available to the industry and the consumer. The fifth edition reviews as many practical aspects of the process, materials, equipment, and products as possible in one concise manual. The goal of this hands-on, training manual is to convey sufficient knowledge to the engineer, technician, operator or manager to understand the aspects of the extrusion coating process.Item code: 0101R345 • Member: $190 • List: $247 Item code: 0101R345EL • Member: $190 • List: $247Purchase the SetItem code: 0101R345BUN • Member: $320 • List: $355

The Coating Processes, Second EditionThis publication, like the original, is intended to be a “one stop shop” for basic technical and operations information, with focus on readability and practical application for coating process engineers to experienced individuals assigned to coating related projects. It will serve as a general reference for personnel involved in the mill, as well as vendors, supervisors and research and development. Content will include: the coated paper/paperboard market, end uses of coated paper/paperboard, base sheet considerations for coating, coating components, coating formulation, coating makedown, coating application, coating drying and post-treatment, coating process instrumentation and operations, coating rheology and coating testing.

Yankee Dryer Safety and Reliability GuidelinesThe NEW “Yankee Dryer Safety and Reliability Guidelines” will update and combine “Guidelines for the Safe Operation of Yankee Dryers” (1995) and “Guidelines For Safety and Condition Assessment” (1992) into one publication. Yankee Dryer Safety and Reliability Guidelines is a reference guide to safe operations and condition assessment of Yankee Dryer. This is a management level publication targeted towards individuals who manage Yankee Dryer assets.

Brownstock WashingBrownstock washing is the heart of kraft pulp mill operation. Each system needs to be completely understood from a theoretical and fundamental perspective. This book will review current state of the art methods for designing and operating brownstock washing systems, including different types of washers and methods for troubleshooting these washer systems. Current types of instrumentation and process control of washing systems will also be highlighted.

Advances in Papermaking Wet End Chemistry Applications TechnologiesThis practical and up-to-date textbook, written by TAPPI’s Paper Additives Committee, will describe some of the most important advances in papermaking wet-end chemistry applications technologies over the last two decades. The information will cover technology from multiple companies and academic sources in a fair-minded way, with emphasis on technologies that have been practiced or demonstrated in the paper mill. This informative, concise and well documented text will emphasize selected areas of advancement of technology related to new classes of equipment, new ways of using chemical additives, and principles of how things work. A single chapter will be devoted to each application area.


REFERENCE SECTION

TITLE ITEM NUMBER MEMBER PRICE NON-MEMBER8 GREATEST MISTAKES NEW MANAGERS MAKE, THE 10-8GREAT $20.00 $25.00 360° LEADER, THE THE12LEADER $20.00 $26.00 AABECEDARIO DE PULPA Y PAPEL (PULP AND PAPER PRIMER, SPANISH) 0101R110S $13.00 $19.00 ACOUSTIC EMISSION NONDESTRUCTIVE EVALUATION OF YANKEE DRYERS 0101R208 $73.00 $109.00 ADVANCES IN LIGNOCELLULOSICS CHARACTERIZATION 0101R280 $118.00 $177.00 ANILOX ROLL-HEART OF THE FLEXO PROCESS, SECOND EDITION, THE 0101R322 $110.00 $135.00 ANTHRAQUINONE PULPING: A TAPPI PRESS ANTHOLOGY OF PUBLISHED 0101R269 $93.00 $140.00 APPLIED NANOTECHNOLOGY: THE CONVERSION OF RESEARCH RESULTS TO PRODUCTS, SECOND ED. 11APNAN-2 $150.00 $160.00 ART AND SCIENCE OF CORRUGATOR SCHEDULING...BY MANUAL AND COMPUTER METHODS, THE 0638CORRS $85.00 $94.00 BBINDER MIGRATION IN PAPER AND PAPERBOARD COATINGS 0101R203 $50.00 $75.00 BIOCATALYSIS AND BIOENERGY 11BIOCAT $140.00 $150.00 BIODEGRADABLE POLYMER BLENDS AND COMPOSITES FROM RENEWABLE RESOURCES 10BIODEGRAD $105.00 $135.00 BIOMASS AND ALTERNATE FUEL SYSTEMS: AN ENGINEERING AND ECONOMIC GUIDE 10BIOALT $70.00 $89.00 BIOMASS GASIFICATION AND PYROLYSIS 11PYROL $125.00 $135.00 BIOMASS TO BIOFUELS: STRATEGIES FOR GLOBAL INDUSTRIES 11BIOFUELS $83.00 $90.00 BIOMASS TO RENEWABLE ENERGY PROCESSES 09BIOMASS $100.00 $130.00 BLACKWELL HANDBOOK OF STRATEGIC MANAGEMENT, THE 10STRATEGIC $52.00 $59.00 BLEACHING OF PULP, THE 0101R331 $175.00 $232.00 BOILER WATER TREATMENT PRINCIPLES AND PRACTICE, VOLUME 1: BOILER BASICS AND STEAM WATER CHEMISTRY 16BOILER1 $125.00 $135.00 BOILER WATER TREATMENT PRINCIPLES AND PRACTICE, VOLUME 2: TREATMENTS, PROGRAM DESIGN, AND MANAGEMENT 16BOILER2 $125.00 $135.00 BOILER WATER TREATMENT PRINCIPLES AND PRACTICE: CHARTS AND NOTES FOR FIELD USE 16BOILER3 $65.00 $75.00 BUILDING A KNOWLEDGE-DRIVEN ORGANIZATION 08BUCKMAN $24.00 $35.00 CCARTONS, CRATES AND CORRUGATED BOARD: HANDBOOK OF PAPER AND WOOD PACKAGING TECHNOLOGY 08HPWPT $140.00 $150.00 CELEBRATING A CENTURY OF ACHIEVEMENT: TAPPI 100 YEAR ANNIVERSARY BOOK 0101R342 $49.00 $59.00 CHEMICAL ANAYLSIS OF INDUSTRIAL WATER, THE 16CAIW $110.00 $120.00 CHEMICAL PROCESS SAFETY: FUNDAMENTALS WITH APPLICATIONS, THIRD EDITION 13CHEMSAFE $145.00 $151.00 CHEMICAL PROCESSING AIDS IN PAPERMAKING: A PRACTICAL GUIDE 0101R192 $80.00 $119.00 CHEMICAL RECOVERY IN THE ALKALINE PULPING PROCESSES, REVISED EDITION 0102B046 $86.00 $115.00 CHEMICAL TREATMENT OF BOILER WATER , THE 16CTBW $65.00 $75.00 CHEMICAL TREATMENT OF COOLING WATER, SECOND EDITION , THE 16CTCW $110.00 $120.00 CHEMISTRY OF MODERN PAPERMAKING 11CHEM $159.00 $179.00 COATING PROCESSES, THE 0102B057 $103.00 $155.00 COLLOID CHEMISTRY OF PAPERMAKING MATERIALS 0101R306 $62.00 $93.00 CONCRETE HANDBOOK: PRACTICAL GUIDE FOR PROTECTING AND IMPROVING THE DURABILITY OF CONCRETE IN PULP AND PAPER MILLS 0101R289 $28.00 $38.00 COOLING WATER TREATMENT: PRINCIPLES AND PRACTICE 16COOL1 $215.00 $225.00 COOLING WATER TREATMENT: PRINCIPLES AND PRACTICE: CHARTS AND NOTES FOR FIELD USE 16COOL2 $35.00 $45.00CONDITION MONITORING STANDARDS, VOL. 1 10CMS1 $195.00 $235.00CONDITION MONITORING STANDARDS, VOL. 2 10CMS2 $195.00 $235.00CONDITION MONITORING STANDARDS, VOL. 3 10CMS3 $195.00 $235.00CONDITION MONITORING STANDARDS, VOL. 4 10CMS4 $195.00 $235.00CONDITIONING MONITORING STANDARDS COMBO (SET) 10CMSSET $745.00 $759 .00CONQUERING INNOVATION FATIGUE: OVERCOMING THE BARRIERS TO PERSONAL AND CORPORATE SUCCESS 10INNOV $32.00 $39.00 CORROSION OF PLASTICS AND RUBBER IN PROCESS EQUIPMENT - EXPERIENCE FROM THE PULP AND PAPER INDUSTRY 0101R206 $75.00 $112.00 CORRUGATED ADHESIVES PREPARATION, FIFTH EDITION 0101R301 $100.00 $150.00 CORRUGATED CONTAINER PLANT HANDBOOK 0101R258 $83.00 $124.00 CORRUGATED CONTAINERS MANUFACTURING PROCESS, THE 0101R281 $75.00 $115.00 CORRUGATED CROSSROADS: A REFERENCE GUIDE FOR THE CORRUGATED CONTAINER INDUSTRY 0101R254 $82.00 $121.00 CORRUGATING DEFECT / REMEDY MANUAL, SIXTH EDITION 0101R153 $100.00 $149.00

For complete descriptions visit www.tappi.org/bookstore.

BOLD - BEST SELLER • ORANGE - NEW PRODUCTS


REFERENCE SECTIONTITLE ITEM NUMBER MEMBER PRICE NON-MEMBERCORRUGATING DEFECT/REMEDY MANUAL, SIXTH EDITION (BOOK AND CD) 0101R153SET $155.00 $230.00 CORRUGATOR BONDING: A TAPPI PRESS ANTHOLOGY OF PUBLISHED PAPERS, SECOND EDITION 0101R265 $75.00 $97.00 CORRUGATOR MONITOR 0101R285 $25.00 $38.00 CORRUGATOR ROLL WEAR MEASUREMENT 0101R261 $25.00 $38.00 COST SAVING STRATEGIES IN PAPERMAKING CHEMISTRY 0101R325 $150.00 $215.00 CREATING VALUE THROUGH PACKAGING - UNLOCKING A NEW BUSINESS AND MANAGEMENT STRATEGY 12CVTP $50.00 $60.00 CRITICAL THINKING IN CONVERTING 0101R302 $81.00 $121.00 CSR STRATEGIES: CORPORATE SOCIAL RESPONSIBILITY FOR A COMPETITIVE EDGE IN EMERGING MARKETS 10CSR $29.00 $35.00 DDICTIONARY OF PAPER, FIFTH EDITION 0102B058 $75.00 $112.00 DYE-BREAKING AGENTS DATABASE 0101R264 $50.00 $75.00 EELEMENTAL CHLORINE FREE BLEACHING: A TAPPI PRESS ANTHOLOGY OF PUBLISHED PAPERS 0101R283 $83.00 $124.00 ENSURING WORKPLACE COMPETENCE: DEVELOPING TRAINING AND CERTIFICATION MATERIALSFOR TODAY’S EMPOWERED WORKFORCE 0101R256 $70.00 $103.00 EXTRUSION COATING MANUAL, FIFTH EDITION 0101R345 $190.00 $247.00 FFIFTH DISCIPLINE, THE 08FIFTH $20.00 $30.00 FILM EXTRUSION MANUAL, SECOND EDITION 0101R313 $157.00 $205.00 FIVE DYSFUNCTIONS OF A TEAM: A LEADERSHIP FABLE, THE 12DYSFUN $25.00 $25.00 FLEXOGRAPHIC TERMS: A GLOSSARY OF TERMS USED IN FLEXOGRAPHIC PRINTING ON CORRUGATED BOARD 0101R279 $26.00 $42.00 FUNCTIONAL ANALYSIS OF LIGNINS AND THEIR DERIVATIVES, THE 0101R194 $54.00 $78.00 FUNDAMENTALS OF ELECTROSPINNING AND ELECTROSPUN NANO FIBERS 17ELECTRONANO $125.00 $139.00 FUNDAMENTALS OF FIBER SCIENCE 16FUNDFIBER $149.00 $159.00 FUNDAMENTALS OF THE KRAFT RECOVERY PROCESS 0101R327 $195.00 $237.00 FUNDAMENTALS OF PACKAGING TECHNOLOGY 16FUNDPACK $210.00 $240.00FUTURE OF SPECIALTY PAPERS IN NORTH AND SOUTH AMERICA: MARKET FORECAST TO 2017, THE RPTSPAP17 $5,355.00 $5,985.00 GGLOSSARY OF REPROGRAPHY AND NON-IMPACT PRINTING TERMS FOR THE PAPER AND PRINTING INDUSTRY 0101R164 $17.00 $25.00 GUIDELINES FOR THE BUYING AND SELLING OF USED CORRUGATED MACHINERY 0101R210 $24.00 $34.00 GUIDELINES FOR THE SAFE OPERATION OF STEAM HEATED PAPER MACHINE DRYERS 0101R250 $37.00 $54.00 GUIDELINES FOR THE SAFE OPERATION OF YANKEE DRYERS, SECOND EDITION 0101R244 $24.00 $36.00 HHANDBOOK FOR PULP AND PAPER TECHNOLOGISTS (THE SMOOK BOOK) FOURTH EDITION 0202SMOOK4 $95.00 $123.00 HANDBOOK FOR PULP AND PAPER TECHNOLOGISTS, FIRST EDITION (SPANISH) 0102B055 $85.00 $127.00 HANDBOOK OF PULP & PAPER TERMINOLOGY: A GUIDE TO INDUSTRIAL ANDTECHNOLOGICAL USAGE, SECOND EDITION 0202TERM $69.00 $79.00 HANDBOOK FOR PULP & PAPER TECHNOLOGIST AND HANDBOOK OF PULP AND PAPER TERMINOLOGY 0202SMSET4 $140.00 $175.00 HANDBOOK OF PAPER & PAPERBOARD PACKAGING TECHNOLOGY, SECOND EDITION 12HPPPT $180.00 $200.00 HEAT SEALING TECHNOLOGY AND ENGINEERING FOR PACKAGING 10HEATSTE $145.00 $175.00 HIGH PURITY PULPS: TESTING, ACCESSIBILITY AND REACTIVITY 0101R309 $31.00 $52.00 HOW TO WRITE WHAT PEOPLE LIKE TO READ 0101R235 $14.00 $19.00 IILLUSTRATED GLOSSARY OF PACKAGING TERMINOLOGY, SECOND EDITION 16PACKTERM $109.00 $120.00INDUSTRIAL ENERGY HARVEST: MANAGING ENERGY FROM THE TOP DOWN, THE 08INDENERGY $40.00 $40.00 INDUSTRIAL ENVIRONMENTAL CONTROL - PULP AND PAPER INDUSTRY, THIRD EDITION 0101R296 $62.00 $93.00 INDUSTRIAL ENVIRONMENTAL CONTROL PULP AND PAPER INDUSTRY, SECOND EDITION (SPANISH) 0102B056S $87.00 $130.00 INTEGRATED BIOREFINERIES - DESIGN, ANALYSIS AND OPTIMIZATION 12INTBIO $128.00 $140.00 INTRODUCTION TO BIOFUELS 11INTBIO $100.00 $120.00 INTRODUCTION TO NANOCOMPOSITE MATERIALS: PROPERTIES, PROCESSING, CHARACTERIZATION 16INTNANO $89.00 $99.00INTRODUCTION TO NONWOVENS 0101R271 $28.00 $42.00 INTRODUCTION TO NONWOVENS TECHNOLOGY 12INT $149.00 $169.00 KKRAFT PULPING 0101R171 $58.00 $87.00 KRAFT RECOVERY BOILERS 0102B064 $93.00 $140.00 KRAFT PULPING, RECOVERY AND BOILERS TRILOGY KRAFTTRIO $257.00 $371.00 LLANGUAGE OF BUSINESS, VOLUME II 0101R282 $25.00 $38.00 LEAN MAINTENANCE 08LEANMAIN $42.00 $56.00

BOLD - BEST SELLER • ORANGE - NEW PRODUCTS14 Become a TAPPI Member • www.tappi.org/join • +1 770 446-1400 or 1 800 332-8686 (US) • 1 800 446-9431 (Canada)

REFERENCE SECTIONTITLE ITEM NUMBER MEMBER PRICE NON-MEMBERLEAN SAFETY: TRANSFORMING YOUR SAFETY CULTURE WITH LEAN MANAGEMENT 12SAFE $37.00 $42.00 LIFE CYCLE INVENTORY ANALYSIS USER’S GUIDE: ENHANCED METHODS AND APPLICATIONS FORTHE PRODUCTS OF THE FOREST INDUSTRY 08LCIA $10.00 $11.00 LIGNIN & LIGNANS ADVANCES IN CHEMISTRY 11LIGNIN $158.00 $170.00 MMAINTENANCE AND CALIBRATION MANUALS FOR ROTARY DIE CUTTERS AND FLEXO FOLDER-GLUER 0101R245 $49.00 $73.00 MAINTENANCE BOOKS SMALL COMBO 10MAINSET $309.00 $329.00MAINTENANCE PAINTING OF STEEL STRUCTURES IN PULP AND PAPER MILLS 0101R339 $31.00 $50.00 MAINTENANCE PLANNING AND SCHEDULING 10MPSB $109.00 $130.00MASS TRANSPORT AND REACTIVE BARRIERS IN PACKAGING: THEORY, APPLICATIONS AND DESIGN 15TRANSPKG $179.00 $189.00 MECHANICAL PULPS: FROM WOOD TO BLEACHED PULP 0101R278 $96.00 $143.00 MECHANICAL SEALS: GUIDELINES FOR THE PULP AND PAPER INDUSTRY 0101R223 $25.00 $38.00 MECHANICS OF PAPER PRODUCTS 13MOPP $89.00 $99.00 MECHANICS OF ROLLERS, THE 0101R255 $75.00 $112.00 MECHANICS OF ROLLERS, THE (JAPANESE) 0101R255J $72.00 $108.00 MECHANICS OF WEB HANDLING, THE 0101R273 $86.00 $112.00 MECHANICS TRILOGY 0101ROISUM $243.00 $362.00 MICRO AND NANOPARTICLES IN PAPERMAKING 0101R312 $165.00 $258.00 MILL-WIDE PROCESS CONTROL & INFORMATION SYSTEMS 0202MS10 $70.00 $80.00 MONOGRAPH ON MICROBIOLOGY OF PAPERMAKING SYSTEMS 0101R323 $110.00 $151.00 NNANO SCIENCE AND NANO MATERIALS: SYNTHESIS, MANUFACTURING AND INDUSTRY IMPACTS 12NSNM $129.00 $149.00 NANOCELLULOSE: FROM NATURE TO HIGH PERFORMANCE TAILORED MATERIALS 13NANOCELL $180.00 $196.00 NANOTECHNOLOGY FOR THE FOREST PRODUCT INDUSTRY VISION AND TECHNOLOGY ROAD MAP 0101R314 $62.00 $73.00 NANOTECHNOLOGY HEALTH AND ENVIRONMENTAL RISKS, SECOND EDITION 13NANOENV $45.00 $55.00 NANOTECHNOLOGY UNDERSTANDING SMALL SYSTEMS 11NANOSMALL $80.00 $100.00 NONWOVENS: THEORY, PROCESS, PERFORMANCE, AND TESTING 0101R199 $86.00 $128.00 NORMAS Y MÉTODOS DE CONTENEDORES CORRUGADOS (SPANISH CORRUGATED CONTAINERS TEST METHODS) 0101R292 $40.00 $50.00 PPACKAGING AND TRANSPORTATION FORENSICS 15TRANSFORENSIC $125.00 $150.00 PACKAGING VALUE CHAIN, THE 11PVC $65.00 $75.00 PAPER COATING ADDITIVES 0102B060 $61.00 $91.00 PAPER COATING VISCOELASTICITY AND ITS SIGNIFICANCE IN BLADE COATING 0101R259 $31.00 $48.00 PAPER MACHINE QUALITY CONTROL SYSTEMS - VOLUME 1: MEASUREMENT SYSTEMS AND PRODUCT VARIABILITY 0101R328 $135.00 $205.00 PAPER MACHINE QUALITY CONTROL SYSTEMS VOLUME1 (BOOK & EBOOK) 0101QCSBUND $205.00 $275.00 PAPER MACHINE STEAM AND CONDENSATE SYSTEMS, FIFTH EDITION 0101R096 $31.00 $50.00 PAPER MACHINE WET PRESS MANUAL, FOURTH EDITION 0102B042 $83.00 $124.00 PAPER: AN ENGINEERED STOCHASTIC STRUCTURE 0101R238 $57.00 $85.00 PAPERMAKING KITS 08PAPERKIT $45.00 $61.00 PAPERMAKING: THE PICTORIAL STORY 0109FLOW $23.00 $34.00 PERFORMANCE TEST PROCEDURE: SODIUM BASE RECOVERY UNITS 0101R263 $61.00 $92.00 PIGMENTS FOR PAPER 0102B062 $103.00 $155.00 PITCH CONTROL, WOOD RESIN AND DERESINATION 0102B067 $101.00 $153.00 POLYMER NANOCOMPOSITES HANDBOOK 11POLYNANO $116.00 $145.00 POWER PIPING DATA, SECOND EDITION 0101R118 $26.00 $39.00 PREVENTIVE MAINTENANCE, ESSENTIAL CARE AND CONDITION MONITORING 10PMEC $135.00 $155.00PRINCIPLES OF NANOPHOTONICS 11NANOPHOTO $69.00 $86.00 PRINCIPLES OF WET END CHEMISTRY 0101R241 $50.00 $70.00 PRINTING FUNDAMENTALS 0102B045 $56.00 $85.00 PROCESS CONTROL FUNDAMENTALS FOR THE PULP AND PAPER INDUSTRY 0101R249 $95.00 $143.00 PROCESS SYNTHESIS FOR FUEL ETHANOL PRODUCTION 09PROSYN $80.00 $104.00 PRODUCTION AND APPLICATIONS OF CELLULOSE NANOMATERIALS 0101R332 $215.00 $275.00 PRODUCTIVITY IMPROVEMENTS IN ROTARY DIE CUT STACKERS 0101R257 $19.00 $29.00 PROPERTIES OF PAPER: AN INTRODUCTION, SECOND EDITION 0102B052 $41.00 $62.00 PROTECTIVE PACKAGING FOR DISTRIBUTION, DESIGN AND DEVELOPMENT 16PROTECTPAK $140.00 $160.00PULP AND PAPER AGITATION: THE HISTORY, MECHANICS, AND PROCESS, SECOND EDITION 0101R177 $25.00 $38.00 PULP & PAPER ENERGY BEST PRACTICE GUIDEBOOK 0101R316 $57.00 $83.00 PULP AND PAPER PRIMER, SECOND EDITION 0101R110 $15.00 $21.00



REFERENCE SECTIONTITLE ITEM NUMBER MEMBER PRICE NON-MEMBERPULP AND PAPER TECHNOLOGY ADVANCED WORKFORCE TRAINING AND EDUCATION SYSTEM, THE: VOL. I: PULP MANUFACTURING 0101R317 $50.00 $65.00 PULP AND PAPER TECHNOLOGY ADVANCED WORKFORCE TRAINING ANDEDUCATION SYSTEM, THE: VOL. II: PAPER MANUFACTURING 0101R320 $50.00 $65.00 PULP AND PAPER TECHNOLOGY ADVANCED WORKFORCE TRAINING AND EDUCATION SYSTEM, SET 0101R317SET $90.00 $125.00PULP BLEACHING: PRINCIPLES AND PRACTICE 0102B061 $124.00 $186.00 QQUALITY IMPROVEMENT TEAM HANDBOOK 0101R260 $29.00 $44.00 RRECENT ADVANCES IN PAPER RECYCLING - STICKIES 08RAPRS $80.00 $95.00 RECYCLED PAPER TECHNOLOGY: AN ANTHOLOGY OF PUBLISHED PAPERS 0101R237 $75.00 $112.00 RELIABILITY –FOCUSED SPARE PARTS & MATERIALS MANAGEMENT 10RSPMM $59.00 $74.00RESULTS ORIENTED RELIABILITY & MAINTENANCE MANAGEMENT 10RPRMM $105.00 $135.00RETENTION OF FINES AND FILLERS DURING PAPERMAKING 0102B063 $93.00 $140.00 ROISUM SERIES, THE 0101ROISUM4 $308.00 $459.00 RUNNING THE GAUNTLET: ESSENTIAL BUSINESS LESSONS TO LEAD, DRIVE, CHANGE AND GROW PROFITS 11RUNN $26.00 $26.00 SSAFETY IS EASY AS PI 13SAFEPI $35.00 $39.00 SECONDARY FIBER RECYCLING 0101R201 $96.00 $145.00 SECRET: WHAT GREAT LEADERS KNOW AND DO, THE, SECOND EDITION 12SECRET $20.00 $23.00 SETTING THE INDUSTRY TECHNOLOGY AGENDA 0101R307 $31.00 $50.00 SHEET-FORMING PROCESS 0102BS09 $27.00 $42.00 SIZING OF PAPER, THIRD EDITION 0101R311 $70.00 $103.00 STARCH AND STARCH PRODUCTS IN SURFACE SIZING AND PAPER COATING 0101R336 $159.00 $199.00 STARCH AND STARCH PRODUCTS FOR WET END APPLICATION 0101R319 $125.00 $185.00 SUPPLY CHAIN BEST PRACTICES FOR THE PULP AND PAPER INDUSTRY 0101R308 $78.00 $114.00 SUPPLY CHAIN BEST PRACTICES FOR THE PULP AND PAPER INDUSTRY (BOOK AND CD) 0101R308SET $119.00 $181.00 SUSTAINABLE ASSET MANAGEMENT: LINKING ASSETS, PEOPLE AND PROCESSES FOR RESULTS 16ASSETMGT $60.00 $68.00SYNTHETIC COATING ADHESIVES 0101R276 $31.00 $48.00 TTAPPI INDUSTRY COMPENSATION SURVEY-2016 COMP15 $30.00 $50.00TAPPI INDUSTRY COMPENSATION SURVEY (NON-PARTICIPANT) COMP15-NP $200.00 $200.00TECHNICAL NEEDS: NONWOVENS FOR MEDICAL/SURGICAL AND CONSUMER USES 0102B049 $31.00 $46.00 TENSION CONTROL 0101R275 $50.00 $75.00 TEN-YEAR FORECASTS OF DISRUPTIVE TECHNOLOGIES IN PAPER AND BOARD TO 2020 RPTPAPER2020 $4,631.00 $5,344.00 THESAURUS OF PULP AND PAPER TERMS, THIRD EDITION 0802THES $95.00 $100.00 TROUBLESHOOTING THE PAPERMAKING PROCESS 0101R298 $106.00 $161.00 UULTIMATE ROLL AND WEB DEFECT TROUBLESHOOTING GUIDE, THE 0101R335 $159.00 $240.00 ULTIMATE ROLL AND WEB DEFECT TROUBLESHOOTING GUIDE, THE (PRINT AND ELECTRONIC FORMATS) 0101RWELECTBUN $239.00 $299.00 VVISUAL WORKPLACE HANDBOOK: ORGANIZE FOR SUCCESS, THE 08VISUAL $19.00 $26.00 WWEB MACHINE BUYING GUIDE - DESIGNING FOR, INSTALLING AND MAINTAINING WEB EQUIPMENT 11WEBMACH $150.00 $175.00 WET-AND DRY-STRENGTH ADDITIVES--APPLICATION, RETENTION, AND PERFORMANCE 0101R284 $23.00 $33.00 WINDERS: THE COMPLETE GUIDE FOR PAPER MILLS AND CONVERTERS 0101R274 $64.00 $96.00 WINDING MACHINES: MECHANICS AND MEASUREMENTS 0102B068 $175.00 $229.00 WOOD QUALITY FACTORS IN LOBLOLLY PINE 0102B048 $43.00 $62.00 WORLD OF MARKET PULP, THE (SOFT COVER) 08WOMPB $160.00 $160.00 WORLD OF MARKET PULP, THE (HARDCOVER) 08WOMPBH $190.00 $190.00

CDS-DVDS-ELECTRONICCORRUGATED CONTAINERS WASTE MANAGEMENT SERIES ON DVDDVD 1 - PEEL WASTE, MATERIAL HANDLING, CONVERTING WASTE I AND II CCWASTE-DVD1 $495.00 $695.00 DVD2 - MISALIGNMENT WASTE, WASTE FROM WARP, WASTE FROM SIDE TRIM, END TRIM AND SCHEDULINGCORE AND SPLICE WASTE CCWASTE-DVD2 $495.00 $695.00 DVD3 - WASTE FROM STOPS AND ORDER CHANGES, A WALK THROUGH A BOX PLANT, WASTE FROM BONDING PROBLEMS I AND II CCWASTE-DVD3 $495.00 $695.00 CORRUGATED CONTAINERS WASTE MANAGEMENT SERIES: SET 1-3 CCWASTE-SET $1,260.00 $2,430.00 CORRUGATED CONTAINERS WASTE MANAGEMENT (SPANISH VERSION) CCWASTESP-DVD1 $495.00 $695.00 CORRUGATED CONTAINERS WASTE MANAGEMENT (SPANISH VERSION) CCWASTESP-DVD2 $495.00 $695.00 CORRUGATED CONTAINERS WASTE MANAGEMENT (SPANISH VERSION) CCWASTESP-DVD3 $495.00 $695.00 CORRUGATED CONTAINERS WASTE MANAGEMENT SERIES: SET 1-3 (SPANISH VERSION) CCWASTESP-SET $1,260.00 $2,430.00

BOLD - BEST SELLER • ORANGE - NEW PRODUCTS16 Become a TAPPI Member • www.tappi.org/join • +1 770 446-1400 or 1 800 332-8686 (US) • 1 800 446-9431 (Canada)

REFERENCE SECTION

TITLE ITEM NUMBER MEMBER PRICE NON-MEMBER

MAKING PULP AND PAPER SERIES ON CD OVERVIEW PAPER AND WOOD MPP-01 $78.00 $119.00 PULP MILL OVERVIEW AND PROTECTING THE ENVIRONMENT MPP-02 $78.00 $119.00 WOOD PREPARATION MPP-03 $78.00 $119.00KRAFT PULPING MPP-04 $78.00 $119.00 CHEMICAL RECOVERY & ENERGY PRODUCTION: MAKING PULP AND PAPER MPP-05 $78.00 $119.00 MECHANICAL AND CHEMI-MECHANICAL PULPING: MAKING PULP AND PAPER MPP-06 $78.00 $119.00 BLEACHING MPP-07 $78.00 $119.00 RECYCLING AND DEINKING MPP-08 $78.00 $119.00 PAPER MILL OVERVIEW MPP-09 $78.00 $119.00 STOCK PREPARATION MPP-10 $78.00 $119.00 WET END CHEMISTRY MPP-11 $78.00 $119.00 PAPER MACHINE WET END MPP-12 $78.00 $119.00 PAPER MACHINE DRY END MPP-13 $78.00 $119.00 SIZE PRESS AND COATING OPERATIONS MPP-14 $78.00 $119.00 TOWEL AND TISSUEMAKING MPP-15 $78.00 $119.00 MAKING PULP & PAPER SET - CDS 1 - 15 MPP-SET $979.00 $1,545.00

PRACTICAL PAPERMAKING SERIES ON CDWOOD FIBERS AND PAPER STRUCTURE PP01CD $114.00 $173.00 STOCK PREPARATION I - THE THICK STOCK SYSTEM PP02CD $114.00 $173.00 STOCK PREPARATION II - THE STOCK APPROACH SYSTEM PP03CD $114.00 $173.00 STOCK PREPARATION III - THE REFINING PROCESS PP04CD $114.00 $173.00 HEADBOX PP05CD $114.00 $173.00 FOURDRINIER OPERATION PP06CD $114.00 $173.00 TWIN WIRE FORMING PP07CD $114.00 $173.00 PRESSING OPERATION PP08CD $114.00 $173.00 DRYING OPERATION I PP09CD $114.00 $173.00 DRYING OPERATION II PP10CD $114.00 $173.00 PRACTICAL PAPERMAKING SET - CDS 1-10 PPSETCD $927.00 $1,406.00

CDS

AN ANTHOLOGY OF FIBER RECYCLING FROM TAPPI CONFERENCES (1997 - 2010) RECSYM-CD $145.00 $275.00 BINDERS & ADDITIVES ANTHOLOGY 0101R340 $75.00 $100.00 CORRUGATING DEFECT / REMEDY MANUAL, SIXTH EDITION 0101R153CD $87.00 $139.00 DICTIONARY OF PAPER, FIFTH EDITION 0102B058CD $75.00 $112.00 MANUAL DE DEFECTOS/REMEDIOS EN LA CORRUGACION, SEXTA EDICION (SPANISH) 0101R153CDS $87.00 $130.00 EXCITING WORLD OF FLEXOGRAPHY WPL-EWF $75.00 $83.00 RECYCLING ANTHOLOGY (1994-2010) PPRANTH-CD $119.00 $249.00 STANDARDS, TECHNICAL INFORMATION PAPERS, AND USEFUL METHODS STUCD-17 $175.00 $619.00 SUPPLY CHAIN BEST PRACTICES FOR THE PULP AND PAPER INDUSTRY 0101R308CD $78.00 $114.00 WORLD OF MARKET PULP 08WOMP $295.00 $295.00

DOWNLOADABLE PDFSMAINTENANCE PAINTING OF STEEL STRUCTURES IN PULP AND PAPER MILLS 0101EMAINT $31.00 $50.00 TAPPI INDUSTRY COMPENSATION SURVEY - PREMIUM FILTERING / PERSONAL REPORT (NEW) COMP15 $30.00 $50.00 TAPPI INDUSTRY COMPENSATION SURVEY - NON PARTICIPANT / REPORT & FILTERING (NEW) COMP15-NP $200.00 $200.00 STARCH AND STARCH PRODUCTS IN SURFACE SIZING AND PAPER COATING 0101ESTARCH $139.00 $199.00

DVDSMORE THAN A BOX: BOX PLANT 101 0101R338 $114.00 $154.00 SAFETYFIRST 09SAFEDVD $395.00 $495.00



REFERENCE SECTIONTITLE ITEM NUMBER MEMBER PRICE NON-MEMBER

ONLINE, E-BOOKS AND VIDEOSMAINTENANCE PAINTING OF STEEL STRUCTURES (ELECTRONIC DOCUMENT) 0101EMAINT $31.00 $50.00 MORE THAN A BOX: BOX PLANT 101 (VIDEO) 0101R334 $114.00 $154.00 STANDARDS, TIPS AND USEFUL METHODS (ONLINE) $250.00 $485.00 STANDARDS, TIPS AND USEFUL METHODS (ONLINE WHEN PURCHASED WITH MEMBERSHIP) $299.00 COMPANY LICENSE - STANDARDS, TIPS AND USEFUL METHODS (ONLINE) SEE PAGE BACK COVER FOR DETAILSPAPER MACHINE QUALITY CONTROL SYSTEMS VOLUME 1: MEASUREMENT SYSTEMS ANDPRODUCT VARIABILITY (E-BOOK) 0101QCSELECT $135.00 $205.00 STARCH AND STARCH PRODUCTS IN SURFACE SIZING AND PAPER COATING (ELECTRONIC DOCUMENT) 01010ESTARCH $159.00 $199.00 STORY OF PAPER (ELECTRONIC DOCUMENT) 0101R085 $10.00 $14.00 TAPPI INDUSTRY COMPENSATION SURVEY - PREMIUM FILTERING / PERSONAL REPORT (ONLINE) COMP-15 $30.00 $50.00 TAPPI INDUSTRY COMPENSATION SURVEY - NON-PARTICIPANT / REPORT AND FILTERING (ONLINE) COMP15-NP $200.00 $200.00 THE ULTIMATE ROLL AND WEB DEFECT TROUBLESHOOTING GUIDE (E-BOOK) 0101RWELECT $159.00 $240.00

CONFERENCE PROCEEDINGS2016 ADVANCED COATING FUNDAMENTALS SYMPOSIUM PROCEEDINGS (PRINT) ADCTGPRINT-16 $149.00 $198.00 2016 ADVANCED COATING FUNDAMENTALS PROCEEDINGS (FLASH DRIVE) ADCTGFD-16 $74.00 $111.00 2016 PLACE CONFERENCE PROCEEDINGS (FLASH DRIVE) PLACEFD-16 $74.00 $111.00 2015 PEERS CONFERENCE PROCEEDINGS (FLASH DRIVE) PEERSFD-15 $74.00 $111.00 2014 ADVANCED COATING FUNDAMENTALS PROCEEDINGS (FLASH DRIVE) ADCTGFD-14 $74.00 $111.00 2014 NETINC. CONFERENCE PROCEEDINGS (FLASH DRIVE) PAPERFD-14 $74.00 $110.002014 PAPERCON CONFERENCE PROCEEDINGS (FLASH DRIVE) PAPERFD-14 $74.00 $111.00 2013 NETINC. CONFERENCE PROCEEDINGS (FLASH DRIVE) PAPERFD-13 $74.00 $111.002013 PAPERCON CONFERENCE PROCEEDINGS (FLASH DRIVE) PAPERFD-13 $74.00 $111.00 2013 PEERS CONFERENCE PROCEEDINGS (FLASH DRIVE) PEERSFD-13 $74.00 $111.00 2012 ADVANCED COATING CONFERENCE PROCEEDINGS (CD) ADCTGCD-12 $74.00 $111.00 2012 INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY FOR RENEWABLE MATERIALS (CD) 12NANOCD $100.00 $137.00

CHARTSCALCULATION FOR TIP 0108040210 SOFTWARE EZSHELL $1,699.00 $1,869.00 CALIBRATED SIZE ESTIMATION CHART (TRANSPARENCY) 0109DIRTCAL $300.00 $350.00 CALIBRATION PLATES TO BE USED WITH TEST METHOD 563 0109CALIB $207.00 $309.00DIRT ESTIMATION CHART 0109DIRT $41.00 $58.00 SIZE ESTIMATION CHART (TRANSPARENCY) 0109DIRTT $57.00 $82.00

MAPPULP AND PAPER “MILLS OF THE WORLD” MAP 12PPMAP $299.00 $319.00



Are you interested in writing a book about a specific topic in the pulp, paper, packaging, tissue or converting industries? As an industry leader in the publishing of original books, we encourage authors and subject matter experts to share their knowledge with our community by submitting a proposal.

The decision to publish is based on the following criteria:• Information provided • Target audience• How the manuscript fits within our portfolio• Current demand for content in the subject area• How the manuscript compares to other, similar proposals• The submitted material complies with our TAPPI Antitrust Policy

OUR SUBMISSION PROCESS FOLLOWS 3 EASY STEPS: 1) Publication Proposal 2) Work Reviewed by Industry Peers 3) Publication Agreement

BECOME A TAPPI AUTHOR

For more information on becoming an author, visit: http://www.tappi.org/become-speaker-author

PAPERMAKING SCIENCE AND TECHNOLOGYThe Best and Most Comprehensive Bookseries

Ever Written on Papermaking

http://www.tappi.org/PSandT

Volume 1 Economics of the Pulp and Paper IndustryVolume 2 Forest Resources and Sustainable ManagementVolume 3 Forest Products ChemistryVolume 4 Papermaking ChemistryVolume 5 Mechanical PulpingVolume 6 Chemical Pulping Part 1, Fibre Chemistry and TechnologyVolume 6 Chemical Pulping Part 2, Recovery of Chemicals and EnergyVolume 7 Recycled Fibre and DeinkingVolume 8 Papermaking Part 1, Stock Preparation and Wet EndVolume 9 Papermaking Part 2, DryingVolume 10 Papermaking Part 3, Finishing

10% Off Printed Books for TAPPI MembersVolume 11 Pigment Coating and Surface Sizing of PaperVolume 12 Paper and Paperboard ConvertingVolume 13 Print Media - Principles, Processes and QualityVolume 14 Process and Maintenance ManagementVolume 15 Materials, Corrosion Prevention and MaintenanceVolume 16 Paper PhysicsVolume 17 Pulp and Paper TestingVolume 18 Paper and Board GradesVolume 19 Environmental Management and ControlVolume 20 Biorefining of Forest Resources

2ND EDITIONNOW AVAILABLE! ALSO AVAILABLE

IN EBOOKS

ORDER TODAY!

THE TAPPIINDUSTRYCOMPENSATION$URVEY

See salary trends across the industry

Compare your compensation with others

Benchmark benefit packages with other companies

Filter results by:Industry segment

Job type

Geographic locations

Level of responsibility

Level of education

And more!

Get started today at www.tappi.org/compsurvey

Tools developed by engineers for engineersStandards&TIPs

Our Individual Online Subscriptions give you point-and-click access to the most current TAPPI Standards and TIPs. Each Standard and TIP costs $49.99 when purchased

individually, while $250 provides TAPPI members with an online subscription for a year’s worth of unlimited access to the entire collection.

• Statistical process control pin adhesion - TIP 0304-23

• Statistical process control of starch gelatinization temperature - TIP 0304-14

• Understanding wet strength: what are MRA, WRA, and WPA? - TIP 0304-69

• Checking the parallel of corrugating rolls with “NCR” paper - TIP 0304-62

• Statistical process control of starch viscosity - TIP 0304-15

• Cross direction warp in corrugated board - TIP 0304-07

• Kappa number of pulp – T 236• Moisture in pulp, paper and paperboard - T 412• Brightness of pulp, paper and paperboard

(directional reflectance) – T 452• Analysis of soda and sulfate white

and green liquors – T 624• Laboratory beating of pulp

(PFI Method) – T 248• Sampling and preparing wood

for analysis – T 257• Basic density and moisture content

of pulpwood – T 258

• Brightness of pulp, paper, and paperboard (directional reflectance at 457 nm) - T 452

• Training standard for paper machine tender - T 1501

• Cross-machine grammage profile measurement (gravimetric method) - T 545

• Standard conditioning and testing atmospheres for paper, board, pulp handsheets and related products - T 402

• Grammage of paper and paperboard (weight per unit area) - T 410

• Papermaker’s formulas - TIP 0502-17

$49.99 each OR Unlimited$250More than 450 additional Standards & TIPs online!Visit www.tappi.org/StandardsandTIPs to purchase your access today.

PAPERMAKING BOARD FABRICATIONPULP MILL

grow your industry resources your industry resources 2017 catalog books • cds • reports...

Documents