g&s foundry auction buyer s guide - pplauctions.com · g&s foundry auction buyer’s guide...
TRANSCRIPT
G&S Foundry
Auction Buyer’s Guide
210 Kaskaskia Drive Red Bud, IL 62278
ONLINE ONLY
Auction
Thursday, March 2, 2017 at 10:00 AM CST- Tuesday, March 7, 2017 at 10:00 AM CST
Inspection
Monday 3/6/17 9:00 am CT – 4:00 pm CT
IMPORTANT INFORMATION
BUYER’S PREMIUM: All Internet buyers will be charged 18% buyer’s premium.
PAYMENT INFORMATION: Everything is being sold for cash on an “AS IS”, “WHERE IS” basis without warranties
expressed or implied. All payments must be made by wire transfer, cash, cashier’s checks, or company checks. Company
checks are only acceptable if accompanied by a bank letter of guarantee.
ALL INVOICES MUST BE PAID IN FULL AT THE SALES CONCLUSION. Any merchandise not paid for by this
time will be considered abandoned and may be resold by the auctioneer, any loss incurred in the resale to be borne by the
original buyer.
SALES TAX: All sales subject to state and local sales tax where applicable, 7.25% for G&S Foundry. If tax exempt, buyer
will be required to complete the tax exempt form for the state that the auction is being held.
REMOVAL: All items must be removed by Friday, March 24, 2017 by 4:00PM CST at which time our representative
will leave the premises. All items remaining after this time WILL BE considered abandoned.
CHECKOUT/REMOVAL HOURS: Wednesday, March 8th thru Friday, March 24th from 8:00AM – 4:00PM CST
M-F with paid in full invoice.
NO MERCHANDISE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS! ALL BIDDERS MUST COMPLY
WITH OUR CUSTOMARY “TERMS OF SALE” COPIES, WHICH ARE ATTACHED TO THIS CATALOG, AS
WELL AS THROUGHOUT THE PREMISES.
PPL GROUP LLC 105 Revere Drive, Suite C
Northbrook, IL 60062 224-927-5320
www.pplgroupllc.com • www.pplauction.com
PPL AUCTION – General Terms of Sale
NOTICE: ALL BIDDERS AND OTHER PERSONS ATTENDING AUCTION SALES AGREE THAT THEY HAVE READ AND HAVE FULL
KNOWLEDGE OF THESE TERMS AND AGREE TO BE BOUND THEREBY.
1. REGISTRATION: TO REGISTER LOGIN TO WWW.BIDSPOTTER.COM AND SEARCH FOR THE AUCTION YOU WISH TO
PARTICIPATE IN (CONTROL + F). ONCE YOU LOCATE THE AUCTION, CLICK THE “SIGN UP” BUTTON. IF YOU HAVE REGISTERED
WITH BIDSPOTTER IN THE PAST, ENTER YOUR USERNAME AND PASSWORD. IF YOU HAVE NEVER USED BIDSPOTTER, CLICK ON
THE ‘REGISTER’ BUTTON. ENTER THE REQUIRED CONTACT INFORMATION AND SELECT A USERNAME AND PASSWORD AND
SUBMIT FORM. YOU WILL RECEIVE AN EMAIL CONFIRMATION OF YOUR REGISTRATION FOR THE AUCTION WITH YOUR BIDDER
PADDLE NUMBER. YOU WILL ALSO RECEIVE AN APPROVAL EMAIL FROM THE AUCTION HOUSE ONCE APPROVED. ON THE DATE
OF THE AUCTION, LOGIN TO BIDSPOTTER WITH YOUR USERNAME AND PASSWORD. YOU WILL BE ABLE TO VIEW A PHOTO OF
EACH LOT WHILE LISTENING TO THE LIVE AUDIO (IF AVAILABLE). BIDDERS ARE RECOMMENDED TO REGISTER 48 HOURS PRIOR
TO THE SALE TO AVOID ANY ISSUES THAT MAY OCCUR.
2. PAYMENT: INVOICES MUST BE PAID IN FULL AFTER SALE UNLESS OTHERWISE SPECIFIED. A BUYER'S PREMIUM OF
18% FOR ON-LINE BIDDERS WILL BE APPLIED TO YOUR INVOICE IN ADDITION TO THE SALES PRICE. THE BUYERS PREMIUM
MAY CHANGE WITH EACH INDIVIDUAL AUCTION. ALWAYS REFER TO THE INDIVIDUAL TERMS WITH EACH OF OUR AUCTIONS.
BUSINESS AND PERSONAL CHECKS WILL NOT BE ACCEPTED WITHOUT A LETTER OF GUARANTEE FROM YOUR BANK. NO
MERCHANDISE WILL BE RELEASED UNTIL INVOICE IS FULLY PAID.
3. TAXES: PRICES MAY NOT INCLUDE ANY FEDERAL, STATE, OR LOCAL TAXES, WHICH ARE IN ADDITION TO THE
PURCHASE PRICE AND MUST BE PAID BY PURCHASER. MACHINERY AND EQUIPMENT USED IN THE MANUFACTURING OR
ASSEMBLY OF TANGIBLE PERSONAL PROPERTY FOR WHOLESALE OR RETAIL SALE ARE EXEMPT FROM TAX IN THE STATE OF
ILLINOIS. OTHERWISE PURCHASER MUST FURNISH A TAX EXEMPTION CERTIFICATE, ANY SALES, USE, EXCISE, OR OTHER
SIMILAR TAX, WHERE APPLICABLE, SHALL ALSO BE THE RESPONSIBILITY OF PURCHASER AND MAY, AT THE ELECTION OF PPL,
BE ADDED TO THE QUOTED PURCHASE PRICE AND INVOICED BY PPL TO PURCHASER. THE FAILURE OF PPL TO INVOICE SUCH
TAXES DOES NOT EXCUSE THE PURCHASER FROM RESPONSIBILITY FOR PAYING SAME. WHEN A SALE IS IN A STATE OTHER
THAN THE STATE OF ILLINOIS, THERE WILL BE SPECIFIC INFORMATION RELATIVE TO THE SALES TAX RATES AND ANY
EXEMPTION TO THE SPECIFIC AUCTION SALE AND WILL BE POSTED WITH EACH INDIVIDUAL AUCTION SALE ON OUR WEB SITE.
4. REMOVAL: EACH AUCTION WILL HAVE SPECIFIC INFORMATION RELATIVE TO THE TIMES OF REMOVAL. ALL ITEMS
MUST BE OFF THE PREMISES BY A SPECIFIC TIME AND DATE. ALL ITEMS REMAINING AFTER THE SPECIFIED TIME WILL BE
CONSIDERED ABANDONED.
5. LIABILITY: LIABILITY: PURCHASES MAY BE REMOVED ONLY ON PRESENTATION OF PAID BILL. REMOVAL SHALL BE
AT THE EXPENSE, RISK AND LIABILITY OF THE PURCHASER. AUCTIONEER SHALL NOT BE RESPONSIBLE FOR GOODS NOT
REMOVED WITHIN THE TIME ALLOWED, BUT SHALL HAVE THE OPTION TO REMOVE AND STORE AT THE EXPENSE AND RISK OF
THE PURCHASER ANY ARTICLE PURCHASED, BUT NOT PAID FOR AND REMOVED WITHIN THE TIME AFORESAID. A CERTIFICATE
OF INSURANCE IS REQUIRED FOR ALL RIGGERS AND SHOULD BE PRESENTED TO PPL GROUP LLC AT THE AUCTION SITE. IF YOU
INTEND TO DO YOUR OWN RIGGING AND USE A POWERED VEHICLE IN THE PROCESS, YOU MUST HAVE A CERTIFICATE OF
INSURANCE. CONTACT PPL GROUP LLC FOR INSURANCE REQUIREMENTS FOR SPECIFIC AUCTION. IF YOU CAN MOVE YOUR
PURCHASES BY HAND OR WITH A NON-POWERED ITEM, SUCH AS A CART, YOU DO NOT NEED TO PRESENT US WITH A
CERTIFICATE OF INSURANCE. PPL GROUP LLC IS NOT A RIGGING COMPANY AND THEREFORE WILL NOT BE ABLE TO HELP WITH
ANY RIGGING.
6. MANNER OF PAYMENT: ALL CHECKS FOR DEPOSIT AND BALANCES DUE SHALL BE PAYABLE TO THE ORDER OF PPL
GROUP LLC. ALL BILLS MUST BE PAID TO REPRESENTATIVES OF THE AUCTIONEER AT THE FACILITY UNLESS OTHERWISE
ANNOUNCED. THE FULL PURCHASE PRICE ON ALL LOTS SOLD TO THE SAME BUYER MUST BE PAID WITHIN THE TIME FIXED
AND BEFORE REMOVAL OF ANY OF THE GOODS.
7. ISSUANCE OF TITLE: TITLES RELATIVE TO TITLED ASSETS PURCHASED WILL BE MAILED TO THE PURCHASER’S
ADDRESS ON FILE AFTER PAYMENT HAS BEEN RECEIVED AND CLEARED.
8. CONDITION OF ARTICLES SOLD: NEITHER THE AUCTIONEER NOR THE SELLER SHALL BE RESPONSIBLE FOR THE
CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN
CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS,
ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL
ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT
WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER
RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING
THEREFROM.
9. SAFETY DEVICES: ARTICLES PURCHASED MAY NOT INCORPORATE APPROVED ACTIVATING MECHANISMS,
OPERATING SAFETY DEVICES OR SAFETY GUARDS, AS REQUIRED BY OSHA OR OTHERWISE. IT IS PURCHASER'S RESPONSIBILITY
THAT ARTICLES PURCHASED BE SO EQUIPPED AND SAFEGUARDED TO MEET OSHA AND ANY OTHER REQUIREMENTS BEFORE
PLACING SUCH ARTICLES INTO OPERATION.
10. INDEMNIFICATION: PURCHASER SHALL DEFEND AND INDEMNIFY AND HOLD AUCTIONEER AND SELLER HARMLESS
FROM AND AGAINST ALL CLAIMS AND LIABILITIES RELATING TO THE CONDITION OF, REMOVAL OF, OR USE OF THE ARTICLES
PURCHASED OR FAILURE OF USER TO FOLLOW INSTRUCTIONS, WARNINGS OR RECOMMENDATIONS OF THE MANUFACTURER,
OR TO COMPLY WITH FEDERAL, STATE, AND LOCAL LAWS APPLICABLE TO SUCH ARTICLES, INCLUDING OSHA REQUIREMENTS,
AND ENVIRONMENTAL PROTECTION AGENCY REQUIREMENTS, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES, COSTS OR
LEGAL EXPENSES ARISING THEREFROM.
11. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST
ALLOWED TIME LIMIT.
12. RESPONSIBILITY FOR NON-DELIVERY: NEITHER THE AUCTIONEER NOR THE SELLER, IN ANY EVENT, SHALL BE
LIABLE FOR NON-DELIVERY OR FOR ANY OTHER MATTER OR THING, TO ANY PURCHASER OF ANY LOT, OTHER THAN FOR THE
RETURN TO THE PURCHASER OF THE DEPOSIT OR SUM PAID ON SAID LOT, SHOULD THE PURCHASER BE ENTITLED THERETO.
13. COMPLIANCE WITH TERMS OF SALE: IN DEFAULT OF PAYMENT OF BILLS IN FULL WITHIN THE TIME THEREIN
SPECIFIED, THE AUCTIONEER IN ADDITION TO ALL OTHER REMEDIES ALLOWED BY LAW MAY RETAIN ALL MONIES RECEIVED
AS DEPOSIT OR OTHERWISE, AS LIQUIDATED DAMAGES. LOTS NOT PAID FOR AND REMOVED WITHIN THE TIME ALLOWED
HEREIN MAY BE RESOLD AT PUBLIC OR PRIVATE SALE WITHOUT FURTHER NOTICE, AND ANY DEFICIENCY, TOGETHER WITH
ALL EXPENSES AND CHARGES OF RESALE INCLUDING LEGAL FEES, WILL BE CHARGED TO THE DEFAULTING PURCHASER.
14. RISK TO PERSON AND PROPERTY: PERSONS ATTENDING DURING EXHIBITION, SALE OR REMOVAL OF GOODS
ASSUME ALL RISKS OF DAMAGE OF OR LOSS TO PERSON AND PROPERTY AND SPECIFICALLY RELEASE THE AUCTIONEER AND
SELLER FROM LIABILITY THEREFORE. NEITHER THE AUCTIONEER NOR HIS PRINCIPAL SHALL BE LIABLE BY REASON OF ANY
DEFECT IN OR CONDITION OF THE PREMISES ON WHICH THE SALE IS HELD.
15. ADDITION TO OR WITHDRAWAL FROM SALE: THE AUCTIONEER RESERVES THE RIGHT TO WITHDRAW FROM SALE
ANY OF THE PROPERTY LISTED OR TO SELL AT THIS SALE PROPERTY NOT LISTED, AND ALSO RESERVES THE RIGHT TO GROUP
ONE OR MORE LOTS INTO ONE OR MORE SELLING LOTS OR TO SUBDIVIDE INTO TWO OR MORE SELLING LOTS. WHENEVER THE
BEST INTEREST OF THE SELLER WILL BE SERVED, THE AUCTIONEER RESERVES THE RIGHT TO SELL ALL THE PROPERTY LISTED,
IN BULK.
16. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: WHEN ITEMS ARE SOLD BY ESTIMATED WEIGHT, COUNT OR
MEASURE, THE PURCHASER WILL BE BILLED FOR AND REQUIRED TO PAY FOR THE ESTIMATED WEIGHT, COUNT OR MEASURE.
IF, UPON DELIVERY, ANY SHORTAGE EXISTS, THE PURCHASER WILL RECEIVE A REFUND AT THE RATE OF PURCHASE. IF THERE
BE AN EXCESS, THE PURCHASER WILL BE REQUIRED TO TAKE AND PAY FOR SUCH EXCESS, AT THE RATE OF PURCHASE. (SEE
PARAGRAPH 4 FOR TIME AND GUARANTEE LIMITATION.)
17. DISPUTE BETWEEN BIDDERS: IF ANY DISPUTE ARISES BETWEEN TWO OR MORE BIDDERS, THE AUCTIONEER MAY
DECIDE THE SAME OR PUT THE LOT UP FOR SALE AGAIN AT ONCE, AND RESELL TO THE HIGHEST BIDDER. THE AUCTIONEER'S
DECISION SHALL BE FINAL AND ABSOLUTE.
18. RESERVE: THE AUCTIONEER RESERVES THE RIGHT TO REJECT ANY AND ALL BIDS. ON LOTS UPON WHICH THERE IS
A RESERVE, THE AUCTIONEER OR HIS ASSIGNED AGENTS, SHALL HAVE THE RIGHT TO BID ON BEHALF OF THE SELLER.
19. RECORDS: THE RECORD OF SALE KEPT BY THE AUCTIONEER AND BOOKKEEPER WILL BE TAKEN AS FINAL IN THE
EVENT OF ANY DISPUTE.
20. INDEPENDENT CONTRACTOR: THE AUCTIONEER IS ACTING AS AN INDEPENDENT CONTRACTOR ONLY AND IS NOT
RESPONSIBLE FOR THE ACTS OF ITS PRINCIPALS OR SELLERS.
21. ADDITIONAL TERMS AND CONDITIONS: THE AUCTIONEER MAY ADD OTHER TERMS AND CONDITIONS OF SALE,
SUCH ADDITIONAL TERMS AND CONDITIONS TO BE ANNOUNCED PRIOR TO THE AUCTION AND ALSO POSTED WITH THE
SPECIFIC AUCTION.
This catalogue on the following pages is meant merely as a guide. The auctioneer does not warrant the genuineness,
accuracy or count of any items described herein.
© 2017 PPL Group LLC 02/27/2017 01:44 PM
Lot Number Description
1 LOT: Assorted Angle Die Grinders
2 LOT: Assorted Right Angle Die Grinders
3 LOT: Assorted Straight Shaft Die Grinders with Stones
4 LOT: Assorted Straight Angle Die Grinders
5 LOT: Assorted Pneumatic Drills
6 LOT: Assorted Pneumatic Drills & Grinders
7 LOT: Assorted Pneumatic Chisels with New Springs
8 LOT: (4) Pneumatic Grinders
9 LOT: (4) Pneumatic Grinders
10 LOT: (4) Pneumatic Grinders
11 LOT: Pneumatic Demolition Hammers & Straight Shank Grinders on (1) Pallet
12 LOT: (2) Plunge Routers, Roto Zip & (2) Dremels
13 LOT: Delta 1 in. Belt & 5 in. Disc Sander, (2) Belt Sanders, (2) Finish Sanders
14 LOT: Bosch & Milwaukee Roto Hammers
15 LOT: (2) Hilti Roto Hammers
16 LOT: Approx. (7) Electric Drills
17 LOT: Approx. (7) Electric Drills
18 LOT: Assorted Cordless Drills, Lights, Chargers, etc.
19 LOT: (2) Large Milwaukee Drills
20 LOT: (2) 7-1/4 in. Circular Saws
21 LOT: (2) Large Right Angle Grinders
22 LOT: (2) Large Right Angle Grinders
23 LOT: (2) Large Right Angle Grinders
24 LOT: (3) Large Right Angle Grinders
25 LOT: Approx. (6) Right Angle Grinders
26 LOT: Approx. (6) Right Angle Grinders
27 LOT: Approx. (6) Right Angle Grinders
© 2017 PPL Group LLC 02/27/2017 01:44 PM
28 LOT: Approx. (6) Right Angle Grinders
29 LOT: Rolling Steel Cart with Combo Wrenches, Torque Wrenches & Ratchets
30 LOT: Misc. Tools, Clamps, Grinders, Pipe Wrenches, Paint Guns, etc. on (1) Pallet
31 LOT: Hydraulic Porta-Powers on (1) Pallet
32 LOT: Gear & Bearing Pullers on (1) Pallet
33 Arbor Press
34 Jet JDP-14J Bench Top Drill Press
35 LOT: Sledge Hammers & Shovels on (1) Pallet
36 Nilfisk Industrial Vac
37 LOT: Approx. (4) Shop Vacs
38 Craftsman Portable Air Compressor
39 Briggs & Stratton Elite Series Electric Start Gas Powered Generator, 8750 Peak Watts
40 Briggs & Stratton Elite Series Electric Start Gas Powered Generator, 8750 Peak Watts
41 Miller 250 Amp TIG Welder Model Syncrowave 250, Power Supply, Cable, Gun, Flow Meter
42 Miller 250 Amp Portable MIG Welder Model Millermatic 250, Power Supply, Cable, Gun, Flow Meter, Spool Gun
43 Miller 250 Amp Portable MIG Welder Model Millermatic 250, Power Supply, Cable, Gun, Gauges
44 Miller 450 Amp Portable Arc Welder Model Goldstar 452
45 Chicago Electric 90 Amp Flux Core MIG Welder, 120 Volt
46 Hypertherm Power Max 1650 Plasma Cutter
47 LOT: Steel Cabinet with 5 in. Jaw Vise & Contents of Arcair Slicing System, Chicago Electric 120V Arc Welder, Welding Gloves, Rod, Wire
48 LOT: Large Wheel Torch Cart with Gauges, Hose, Torch
49 LOT: 48 in. x 72 in. Steel Fabrication Table with 6 in. Jaw Vise, Boom with Electric Hoist & Assorted Clamps
50 LOT: 48 in. x 60 in. Rolling Steel Fabrication Table with Assorted Clamps
51 Jet 16 in. Portable Abrasive Cut-off Saw
52 Baldor 3/4 HP, 8 in. Double End Pedestal Grinder
53 8 in. Double End Pedestal Grinder
54 LOT: Doosan CNC Turning Center Model Puma 2600MS, S/N 5257 (2004), 10 in. 3-Jaw Chuck, Tool Eye, 24 Position Turret, 6 in. 3-Jaw Sub-Spindle, Coolant, Chip Conveyor, Doosan/Fanuc i Series CNC Control, with (3) Pieces Live Tooling
55 Doosan CNC Turning Center Model Puma-280LM, S/N P28LM0169, 10 in. 3-Jaw Chuck, Tool Eye, 12 Position Turret, Live Tooling Capability, Chip Conveyor, Coolant, Fanuc Series 21i-TB CNC Control
© 2017 PPL Group LLC 02/27/2017 01:44 PM
56 Doosan CNC Turning Center Model Puma-280LM, S/N P28LM1541, 10 in. 3-Jaw Chuck, Tool Eye, 12 Position Turret, Live Tooling Capability, Chip Conveyor, Coolant, Fanuc Series 32i Model A CNC Control
57 LOT: Cart with (6) Pieces Live Tooling
58 Doosan CNC Turning Center Model Lynx 220LMA, S/N L220M0806 (2010), 6.5 in. Chuck, Tool Eye, Parts Catcher, 24 Position Turret with Live Tooling, Hydraulic Tailstock, Chip Conveyor, Doosan/Fanuc i Series CNC Control
59 Doosan CNC Turning Center Model Lynx 220LMA, S/N L220M0948 (2010), 6.5 in. Chuck, Tool Eye, Parts Catcher, 24 Position Turret with Live Tooling, Hydraulic Tailstock, Chip Conveyor, Doosan/Fanuc i Series CNC Control
60 LOT: Cart with (8) Pieces Live Tooling
61 Okuma CNC Turning Center Model Genus L400, S/N P1106, Chuck, 12 Position Tool Turret, Tailstock, Chip Conveyor, Okuma OSP-P200LA-R CNC Control
62 Okuma CNC Turning Center Model L300-M, S/N PA201, Chuck, Tool Eye, 12 Position Turret, Tailstock, Chip Conveyor, Okuma OSP-P200LA-12 CNC Control (offered subject to lenders approval)
63 LOT: (7) Pieces Live Tooling
64
Mazak CNC Vertical Machining Center Model Variaxis 500-5X II, S/N 187311 (2006), (2) 16 in. x 16 in. Pallets with Rotary Pallet Changer, #40 Taper, 35 - 12,000 RPM Spindle, X = 20.08 in., Y = 20.08 in., Z = 18.11 in., A (Table Tilting) = -120 to +30, C (Table Rotation) = 360, 660 lb. Max. Table Load, 80 Position ATC, Chiller, Superflow Single Filter High Pressure Coolant System, Coolant Tank with Chip Conveyor, Mazatrol Matrix Voice Advisor CNC Control
65 Haas CNC Vertical Machining Center Model VF-6, S/N 14207 (1998), #50 Taper, 30 HP High Torque Spindle, 28 in. x 64 in. Work Table, 20 Position ATC, Coolant, Chip Auger, Haas CNC Control
66 Haas CNC Vertical Machining Center Model VF-4D, S/N 31704 (2003), #40 Taper, 1000 IPM, 20 HP Vector Drive, Haas VOP-D, Thru-Spindle Coolant, 18 in. x 52 in. Work Table, 24 Position ATC, Haas CNC Control, Chip Auger, Haas CNC Control
67 Haas CNC Vertical Machining Center Model VF-4D, S/N 1065159 (2008), #40 Taper, 20 HP Vector Drive Spindle, 1000 IPM, 18 in. x 52 in. Work Table, 20 Position ATC, Coolant, Chip Auger, Haas CNC Control
68Haas CNC Vertical Machining Center Model VF-4B, S/N 31655 (2003), #40 Taper, 10,000 RPM, 1000 IPM, 20 HP 2-Speed Gear Drive, Haas VOP-C, Thru-Spindle Coolant, 18 in. x 52 in. Work Table, 40 Position ATC, Chip Auger, Haas CNC Control (tool changer needs repair, with spare indexer)
69 Haas CNC Vertical Machining Center Model VF-3B, S/N 1064588 (2008), #40 Taper, 1000 IPM, 20 HP 2-Speed Gear Drive, Haas VOP-D, Thru-Spindle Coolant, 18 in. x 48 in. Work Table, 24 Position ATC, Chip Auger
70 Haas CNC Vertical Machining Center Model VF-3, S/N 11585 (1997), #40 Taper, 15 HP High Torque Spindle, 710 IPM, Brushless Servos, 18 in. x 48 in. Work Table, 20 Position ATC, Coolant, Chip Auger, Haas CNC Control
71 Haas CNC Vertical Machining Center Model VF-3, S/N 15311, #40 Taper, 20 HP Vector Drive Spindle, 710 IPM, Brushless Servos, 18 in. x 48 in. Work Table, 30 Position ATC, Coolant, Chip Auger, Haas CNC Control
72 Haas CNC Vertical Machining Center Model VF-3, S/N 8043 (parts machine)
73 Haas CNC Vertical Machining Center Model Mini Mill, S/N 49021 (2006), 12 in. x 28.5 in. Work Table, 10 Position ATC, Coolant, Haas CNC Control
74 Okuma CNC Vertical Machining Center Model MC-V4020, S/N 129705.0981, 20 in. x 48 in. Work Table, 20 Position ATC, Coolant, Okuma OSP-P200M CNC Control, Chip Conveyor
75 Okuma CNC Vertical Machining Center Model MC-50VA, S/N 0304 (parts machine)
76 Okuma CNC Vertical Machining Center Model MC-40VB, S/N 0372 (needs repair)
77Mazak CNC Horizontal Machining Center Model PFH-5800, S/N 200015 (2007), (2) 19.75 in. x 19.75 in. Pallets with Rotary Pallet Changer, 120 Position ATC, Super Flow Single Filter High Pressure Coolant System, Chip Conveyor, with Coolant Tank & Pumps, Daikin Chiller, Mazatrol 640M CNC Control
78Mazak CNC Horizontal Machining Center Model PFH-5800, S/N 203728 (2008), (2) 19.75 in. x 19.75 in. Pallets with Rotary Pallet Changer, 120 Position ATC, Super Flow S8/1000 High Pressure Coolant System, Chip Conveyor, with Coolant Tank & Pumps, Daikin Chiller, Mazatrol 640M CNC Control
79LOT: (2) Mazak CNC Horizontal Machining Centers Model PFH-5800, S/Ns 183693 (2004), 174091 (2005), (2) 19.75 in. x 19.75 in. Pallets with Rotary Pallet Changer, 120 Position ATC, Chip Conveyor, Coolant Tank & Pumps, with 10-Pallet Pool with Transfer & Set-up Station (tombstones sold separately)
80 Leblond Makino CNC Horizontal Machining Center Model MC1516-5X, 50 in. Dia. Tilting Indexing Work Table with (2) 39.5 in. x 39.5 in. Pallets, 60 Position ATC, Coolant, Fanuc CNC Control
81 Haas CNC Open Side Planer Horizontal Machining Center Model HS-3R, S/N 50756 (1999), 40 in. x 126 in. Work Table with 37 in. Dia. Center Indexer, 28 Position Rotary ATC, Coolant, Chip Augers, Haas CNC Control
© 2017 PPL Group LLC 02/27/2017 01:44 PM
82Sparton/Marvel 13 in. x 13 in. Automatic Programmable Horizontal Band Saw Model PA13/3EPC, S/N EPA130903EPC, 24 in. Power Stroker, Power Clamping & Feed, Coolant, Roller Feed Table, HiTech Electronics Corp. PLC Control (offered subject to lenders approval)
83 HWS Automatic Molding Machine Model HSP-D (2000), 40 in. x 32 in. Flask Size, 13/13 (15 in. x 15 in. with 2 in. Upsets), (2) Spare Flasks, Patterns, Double Hydraulic Pump
84 Kinergy 36 in. x 48 ft. Mold Dump Oscillating Conveyor
85 36 in. x 90 ft. Belt/Shaker Conveyor with Lump Breakers
86 LOT: Simplicity 4 ft. x 10 ft. Shake-out Table, 7.5 HP Drive, with Conveyor
87 ITC 750 kw Induction Furnace Power Supply (#2)
88 ITC 600 kw Induction Furnace Power Supply (#1)
89 Inductotherm 1000 lb. Aluminum Frame Hydraulic Tilt Furnace
90 ITC Induction Furnace 600 kw Power Supply
91 Hydraulic Power Supply for Furnace (upper dock)
92 LOT: ITC Closed Loop Furnace Cooling Water System with Holding Tanks, Vertical Storage Tank, Pumps, Surge Tank, Controls
93 Recold/Marley Platform Mounted Exterior Cooling Tower Model JW 100C, S/N JW-10027521-A1, with Fan (late model)
94 500 lb. Swing Lift Induction Melting Furnace for Non-Ferrous
95 500 lb. Swing Lift Induction Melting Furnace for Non-Ferrous
96 Inductotherm VIP Mark IV 1000 250 kw Power Supply
97 Gas Fired Aluminum Casting Line Holding Furnace with Control Box
98 Degassing Unit
99 Gas Fired Aluminum Casting Line Holding Furnace with Control Box
100 LOT: Gas Fired Aluminum Casting Line Holding Furnace with Control Box, Brumund Foundry Portable Degasser
101 Gas Fired Aluminum Casting Line Holding Furnace with Control Box
102 LOT: (2) Gas Fired Aluminum Casting Line Holding Furnaces with Control Box
103 LOT: (2) G&S 2100 lb. Electric Aluminum Holding Furnaces with Control Box, Pneumatic Cover
104 Open Top Electric Quench Tank with Pumps
105 Fabricated Tilt Furnace Base
106 Hevi-Duty Guillotine Door Electric Furnace Type HD-153012-0, S/N 52318, 1850F Max. Temperature
107 Lindberg Electric Single Swing Door Furnace
108 Lindberg Electric Single Swing Door Furnace
109 Modern Ladle
© 2017 PPL Group LLC 02/27/2017 01:44 PM
110 Modern Ladle
111 Ladle
112 Ladle
113 Ladle
114 Ladle
115 Ladle
116 Ladle
117 LOT: (1) Ladles
118 LOT: Ceramic Ladle Insert with Accessories
119 4-Position Portable Ingot Mold
120 4-Position Portable Ingot Mold
121 LOT: (3) Temperature Probes with Love Series 2600 Controls
122 Harrison Cold Box Double-Station Core Blower Model 1818CABP, S/N 531, with Mezzanine
123 Palmer No Bake Mixer Model MK50-2A, S/N MK1544, 50 lbs. per Minute Capacity, with Pumps
124 GFE Liquid Catalyst System with Model LCC-P55 Drum Cabinet
125 LOT: (2) GFE Gassing Units Model LCC-G75
126 Sand Transporter
127 Elevator
128 LOT: Sand Hopper, Silo
129 LOT: Sand Hopper, Silo
130 Harrison COR-BLO Shell Core Blower Model 1616DGAPC, S/N 523
131 Harrison COR-BLO Shell Core Blower Model 1616GAPC, S/N 513
132 Dependable Shell Core Blower Model 400SA, S/N 108
133 Dependable Shell Core Blower Model 200 (parts machine)
134 LOT: Metal Shelving Units with Large Quantity of Spool Chaplets & Perf Forms
135 LOT: (2) Small Hoppers
136 36 in. x 9 ft. Screen
137 Kinergy Attrition Mill
© 2017 PPL Group LLC 02/27/2017 01:44 PM
138 Discharge Vibrating Conveyor
139 30 ft. High (est.) Elevator
140 35 ft. (est.) Belt Conveyor
141 LOT: (2) Elevated Hoppers
142 LOT: Additive Feed System
143 LOT: (5) Large Sets Aluminum Flasks
144 LOT: (5) Sets Aluminum Flasks
145 LOT: (6) Sets Aluminum Flasks
146 LOT: (5) Sets Aluminum Flasks
147 LOT: (6) Sets Aluminum Flasks
148 LOT: (8) Sets Aluminum Flasks
149 LOT: Assorted Steel Flasks
150 LOT: Assorted Wood Flasks
151 Large Sand Silo
152 LOT: (3) Hoppers
153 LOT: Large Hopper on Steel Platform, with 30 in. x 10 ft. (est.) Powered Belt Conveyor
154 Large Bolted Steel Storage Silo
155 Sand Hopper with Pneumatic Gate
156 Sand Hopper with Pneumatic Gate
157 OPEN
158 LOT: (5) Conveyors - (1) 24 in. x 50 ft. (est.), (3) 24 in. x 20 ft. (est.), (1) 30 in. x 120 ft. (est.)
159 Wheelabrator Tumblast Cleaning Machine, S/N A86916, 36 in. x 42 in. Steel Belt with Elevator, Dust Collector
160 Wheelabrator Tumblast Cleaning Machine, 28 in. Dia. x 36 in. Wide Rubber Belt, Power Mesh Door, Shot Elevator & Wheel, Dust Collector
161 Pangborn Tumblast Machine Model GN-4, S/N 15GN4-7320 (parts machine)
162 Setco 30 in. Single-End Snag Grinder Type 923-515-8, Model SPC, S/N 107142 (#SNAG4)
163 Setco 30 in. Single-End Snag Grinder Type 923-515-8, Model SPC, S/N 246340 (#SNAG5)
164 Standard 24 in. Single End Snag Grinder Type V5-3C, S/N 59274 (#SNAG3)
165 Standard 24 in. Single End Snag Grinder (#SNAG2)
© 2017 PPL Group LLC 02/27/2017 01:44 PM
166 U.S. Single End Snag Grinder (#SNAG6)
167 Divine 60 in. Combination Double End Abrasive Wheel / 3 in. Belt Grinder (#BG4)
168 Rome 52 in. Combination Double End Abrasive Wheel / 3 in. Belt Grinder (#BG2)
169 45 in. Combination Double End Abrasive Wheel / 3 in. Belt Grinder
170 42 in. Combination Double End Abrasive Cut-off / Snag Grinder (#SNAG1)
171 32 in. Combination Double End Abrasive Wheel / 3 in. Belt Grinder
172 30 in. Double End Abrasive Cut-off (#3)
173 28 in. Combination Double End Abrasive Wheel / 3 in. Belt Grinder
174 40 in. Double End Abrasive Cut-off (#CO3&4)
175 Speed Cut 16 in. Abrasive Cut-off Saw No. 16, S/N 18058201
176 10 HP Manual Feed Abrasive Cut-off Saw
177 Queen City 10 in. Double End Snag Grinder
178 Jet Spindle Sander Model DVS-10, S/N 090138
179 Apex 24 in. Disc Sander, with Tilting Work Table
180 Greenlee 24 in. Double End Disc Sander, Tilting Work Tables (one missing)
181 Oxford Instruments Foundry-Master Spectrometer, S/N 01J0056
182 Spectro 42 Channel Spectrometer, S/N 7461/95
184 Dietert Fisher Impact Tester, S/N 38748
185 Dietert Compaction Tester, S/N 35337
186 Fisher Thermix Stirrer
187 Bench Top Lab Oven
188 LOT: (2) Dietert Moisture Tellers
189 LOT: (2) Dietert Electric Permmeters
190 Olympus Stereo Microscope, with Camera Mount
191 LOT: Contents of Counter Top including 50 ml Digital Titrette, Digital Burette, Remaining Lab Supplies
192 Thermco Hydrogen Analyzer
193 Detroit Hardness Tester Model PH-1
194 12 in. Powermatic Disc Sander
© 2017 PPL Group LLC 02/27/2017 01:44 PM
195 LOT: New 30 in. Abrasive Wheel & Large Quantity Abrasive Belts & Discs
196 LOT: Large Quantity Conveyor Belts
197 LOT: Large Assortment of Commemorative Plaque Numbers & Letters, in Assorted Fonts
198 Sly 50 HP Pulse Jet Dust Collector
199 Tannewitz 36 in. Vertical Band Saw, Tilting Table, Extra Height
200 Northfield 36 in. Vertical Band Saw, S/N 910554-E
201 36 in. Vertical Band Saw
202 36 in. Vertical Band Saw
203 Northfield Horizontal Blade Slicer Band Saw Model 20 SPEC, S/N 900776-F
204 DoAll 26 in. Vertical Band Saw Model 2612-H, S/N 284-68111, with Butt Welder
205 DoAll 20 in. Vertical Band Saw Model 2013-20, S/N 397-81809, with Blade Welder
206 Powermatic 20 in. Vertical Band Saw Model 87, S/N 65-5942
207 DoAll 16 in. Vertical Band Saw Model Contour-Matic 1613-2, S/N 150-60185, 24 in. x 24 in. Tilting Work Table
208 Continental 11 in. Pedestal Band Filer
209 Jet 9 in. Portable Horizontal Band Saw Model HBS916W, S/N 414468
210 Kalamazoo 12 in. Horizontal Band Saw Model 1220
211 Wilton Portable Horizontal/Vertical Band Saw Model 3410, S/N 060612260
212 Jet Portable Horizontal Band Saw
213 Wilton Portable Horizontal Band Saw
214 Delta 14 in. Pedestal Vertical Band Saw
215 Grizzly 10 in. Tilting Arbor Table Saw, with Rip Fence (#G0690)
216 Delta 10 in. Contractors Table Saw
217 Safety Speed Cut / Milwaukee 48 in. x 120 in. Vertical Panel Saw
218 Delta Bench Top Compound Miter Saw
219 Powermatic 24 in. Jig Saw, S/N 8495105
220 Grizzly 2-Bag Portable Dust Collector
221 Baldor 8 in. Double End Pedestal Grinder
222 Grizzly 12-Speed, 20 in. Drill Press Model G7948
© 2017 PPL Group LLC 02/27/2017 01:44 PM
223 Guardian Power 16-Speed Drill Press
224 12 in. x 4 in. Pedestal Planer
225 Shaper (on office mezzanine)
226 LOT: Contents of Loft above Main Offices including Huge Inventory of Electrical, Plumbing, Bearings, Machine Parts, Shelving, etc. (excludes shaper)
227 Sweco 60 in. Dia. Vibratory Deburrer
228 Roto-Finish Bench Top 20 in. Vibratory Deburring Machine Model 4141, S/N ST-1S-97-A6
229 Triple-Head Tapewriter Station
230 Monarch 16 in. x 54 in. Geared Head Engine Lathe, S/N 42697, 18.5 in. Actual, Chuck, Carriage, Taper, Threading, Steady Rest, Tailstock, Pan Bed
231 Monarch 16 in. x 54 in. Toolroom Lathe Model 16CY, S/N 28694, Chuck, Carriage, Taper, Tailstock
232 Pratt & Whitney 16 in. x 36 in. Geared Head Engine Lathe, Chuck, Carriage, Taper, Threading, Tailstock
233 Jet 13 in. x 25 in. Bench Lathe, S/N N/A, Chuck, Carriage, Threading, Tailstock, Bench
234 Hendey 14 in. x 30 ft. Geared Head Engine Lathe, Chuck, Carriage, Tailstock
235 12 in. x 30 in. Lathe
236 LOT: (5) Assorted Lathe Chucks
237 Carlton 4 ft. Arm x 11 in. Column Radial Drill, S/N 1A3937, with Box Table & Base
238 Sunnen Precision Honing Machine Model MBB-1650-EJ2C, S/N 53024, Coolant
239 Sunnen Precision Honing Machine Model MBB-1600, S/N 41310, Coolant
240 LOT: Steel Table with Hone Tooling & Accessories
241 Greenerd No. 4 Adjustable Bed Floor Arbor Press
242 Okamoto 12 in. x 24 in. Hydraulic Surface Grinder Model ACC12.24ST, S/N 83959, 12 in. x 24 in. Electromagnetic Chuck, Power Downfeed, Coolant Tank with Paper Filter (offered subject to lenders approval)
243 Gallmeyer & Livingston 12 in. x 24 in. Hydraulic Surface Grinder Model 45, S/N 8-45265, 12in. x 24in. Electromagnetic Chuck with Electromatic Chuck Control, Coolant
244 Cincinnati 12 in. x 30 in. Universal Cylindrical Grinder, S/N 2U3D1L-119-R, Motor Driven Work & Wheel Heads, Drop Down Motor Driven Internal Spindle, Coolant
245 LOT: (3) Magnetic Chucks - (1) 6 in. x 12 in., (2) 10 in. x 20 in.
246 Mattison 42 in. Rotary Surface Grinder Model Hanchett No. 24, S/N 24-132, with Neutrofier Chuck Control
247 Cincinnati Horizontal Mill No. 4 H.P., S/N 8A4P1L-4, 19 in. x 72 in. Work Table
248 60 in. x 60 in. x 29 in. T-Slot Angle Plate
249 24 in. x 60 in. x 48 in. Drilled & Tapped Angle Plate
250 C&M Lodestar 2 Ton Electric Hoist
© 2017 PPL Group LLC 02/27/2017 01:44 PM
251 Powermatic 20 in. Production Base Drill Press
252 Baldor 6 in. Double End Pedestal Grinder
253 Olsen Mfg. Power Flarer Model 50DBF, S/N 3461
254 Gates Power Crimp Hydraulic Hose Fitting Crimper Model PC707
255 LOT: Ridgid Power Chuck Model 300, with Accessories
256 Zero Blast-n-Peen 2-Hole Blast Cabinet
257 Empire 2-Hole Blast Cabinet
258 LOT: Alliant Variable Speed Vertical Mill Model 949-3V, S/N K2V-1839, 9 in. x 49 in. Power Feed Work Table, Power Draw Bar, Mitutoyo DRO, with R8 Tooling
259 Bridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N 174817, 9 in. x 42 in. Power Feed Work Table, Newall Programmable DRO
260 Bridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N 33073, 9 in. x 42 in. Power Feed Table
261 Bridgeport/Enco Variable Speed Vertical Mill, S/N 120401, 9 in. x 42 in. Power Feed Work Table
262 Bridgeport (Taiwan) 1 HP Vertical Mill, S/N 850CC41A (needs repair)
263 Kurt 10 in. Vise
264 Kurt 8 in. Vise
265 Kurt 8 in. Vise
266 Kurt 8 in. Vise
267 Kurt 6 in. Vise
268 Kurt 6 in. Vise
269 Kurt 6 in. Vise
270 Kurt 6 in. Vise
271 Kurt 6 in. Vise
272 Kurt 6 in. Vise
273 Kurt 6 in. Vise
274 Kurt 6 in. Vise
275 Kurt 6 in. Vise
276 Kurt 6 in. Vise
277 Kurt 6 in. Vise
278 Kurt 6 in. Vise
© 2017 PPL Group LLC 02/27/2017 01:44 PM
279 Kurt 6 in. Vise
280 Kurt 6 in. Vise
281 LOT: (2) 6 in. Vises, Drill Press Vise, Precision Vise
282 LOT: 25 in. T-Slot Rotary Table, L&W Indexer
283 LOT: 8 in. Vertical & Horizontal Indexer, 5C Collet Fixture
284 LOT: (4) Assorted Hydraulic Lathe Chucks
285 LOT: Assorted Chuck Jaw Sets
286 LOT: (6) Angle Plates
287 LOT: (3) Tombstone Fixtures, Angle Plate
288 Chick Tombstone Chuck
289 Haas 12 in. 4th Axis Indexer
290 Haas 8 in. 4th Axis Indexer
291 Haas 6 in. 4th Axis Indexer
292 4th Axis Indexer
293 LOT: Haas Hand Held Controller & Assorted Circuit Boards
294 LOT: Tooling Cart with Approx. (48) Cat 50 Tool Holders & Tooling
295 LOT: Tooling Cart with Approx. (50) Cat 50 Tool Holders & Tooling
296 LOT: Tooling Cart with Approx. (35) Cat 50 Tool Holders & Tooling
297 LOT: Tooling Cart with Approx. (40) Cat 50 Tool Holders & Tooling
298 LOT: Tooling Cart with Approx. (50) Cat 50 Tool Holders & Tooling
299 LOT: Vidmar Tooling Cabinet with Approx. (75) Cat 50 Tool Holders & Tooling
300 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
301 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
302 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
303 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
304 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
305 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
306 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
© 2017 PPL Group LLC 02/27/2017 01:44 PM
307 LOT: Approx. (40) Cat 50 Tool Holders on (1) Pallet
308 LOT: Approx. (20) Cat 50 Tool Holders on Rolling Steel Cart
309 LOT: (2) Cat 50 ItsBore Boring Heads
310 Cat 50 Renishaw MP10 Machine Probe
311 Cat 50 Renishaw MP10 Machine Probe
312 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
313 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
314 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
315 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
316 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
317 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
318 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
319 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
320 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
321 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
322 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
323 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
324 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
325 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
326 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
327 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
328 LOT: Rolling Cart with Approx. (40) Pieces Cat 50 Tool Holders & Tooling
329 LOT: Tooling Cart with Approx. (48) Cat 40 Tool Holders & Tooling
330 LOT: Tooling Cart with Approx. (48) Cat 40 Tool Holders & Tooling
331 LOT: Tooling Cart with Approx. (48) Cat 40 Tool Holders & Tooling
332 LOT: Rolling Cart with Assorted Tool Holders - 40 & 50
333 LOT: Large Assortment ER Collets
334 LOT: Large Assortment ER Collets
© 2017 PPL Group LLC 02/27/2017 01:44 PM
335 LOT: Large Assortment ER Collets
336 LOT: Work Bench with Approx. (40) Cat 40 Tool Holders & Tooling
337 LOT: Work Bench with Approx. (40) Cat 40 Tool Holders & Tooling
338 LOT: Work Bench with Approx. (40) Cat 40 Tool Holders & Tooling
339 LOT: Tooling Cart & Table with Approx. (55) Cat 40 Tool Holders & Tooling
340 LOT: Approx. (20) Cat 40 Tool Holders with Insert Face & End Mills
341 LOT: Approx. (20) Cat 40 Tool Holders with Insert Face & End Mills
342 LOT: Approx. (20) Cat 40 Tool Holders with Insert Face & End Mills
343 LOT: Approx. (20) Cat 40 Tool Holders with Insert Slotters, End Mills, Face Mills
344 LOT: (3) Assorted Boring Heads - Cat 40
345 LOT: (3) Assorted Boring Heads - Cat 40
346 LOT: (3) Assorted Boring Heads - Cat 40
347 LOT: (3) Assorted Boring Heads - Cat 40
348 LOT: (3) Assorted Boring Heads - Cat 40
349 LOT: (3) Assorted Boring Heads - Cat 40
350 LOT: (3) Assorted Boring Heads - Cat 40
351 LOT: (3) Assorted Boring Heads - Cat 40
352 LOT: (3) Assorted Boring Heads - Cat 40
353 LOT: (3) Assorted Boring Heads - Cat 40
354 LOT: (4) Assorted Boring Heads - Cat 40
355 LOT: (4) Assorted Boring Heads - Cat 40
356 LOT: (4) Assorted Boring Heads - Cat 40
357 LOT: (4) Assorted Boring Heads - Cat 40
358 LOT: (4) Assorted Boring Heads - Cat 40
359 LOT: (5) Assorted Boring Heads - Cat 40
360 LOT: (5) Assorted Boring Heads - Cat 40
361 Cat 40 Right Angle Attachment
362 Renishaw/Haas OMP-40 Machine Probe - Cat 40
© 2017 PPL Group LLC 02/27/2017 01:44 PM
363 Renishaw/Haas OMP-40 Machine Probe - Cat 40
364 Renishaw/Haas OMP-40 Machine Probe - Cat 40
365 Renishaw/Haas OMP-40 Machine Probe - Cat 40
366 Renishaw OMP-60 Machine Probe - Cat 40
367 Renishaw MP700 Machine Probe - Cat 40
368 Renishaw MP700 Machine Probe - Cat 40
369 Renishaw MP700 Machine Probe - Cat 40
370 Renishaw MP700 Machine Probe - Cat 40
371 Renishaw MP-10 Machine Probe - Cat 40
372 LOT: (2) Renishaw Machine Probes - MP700 & MP-9
373 LOT: Renishaw Probe Parts & Accessories
374 LOT: Large Quantity Carbide End Mills
375 LOT: Large Quantity Carbide End Mills
376 LOT: Large Quantity Carbide End Mills
377 LOT: Large Quantity Carbide End Mills
378 LOT: Large Quantity Carbide End Mills
379 LOT: Large Quantity Carbide End Mills
380 LOT: Assorted Carbide Coolant Drill Bits
381 LOT: Assorted End Mills
382 LOT: Assorted Drill Bits & Reamers
383 LOT: Assorted Taps & Tapping Head
384 LOT: Large Quantity Carbide Inserts
385 LOT: Large Quantity Carbide Inserts
386 LOT: Large Quantity Carbide Inserts
387 LOT: Assorted Carbide Inserts & Carbide Drill Tips
388 LOT: Assorted Boring Bars
389 LOT: Assorted Boring Bars
390 LOT: Assorted Boring Bars
© 2017 PPL Group LLC 02/27/2017 01:44 PM
391 LOT: Assorted Boring Bars
392 LOT: Assorted Small Boring Bars
393 LOT: Assorted Coolant Insert Drills
394 LOT: Assorted Drill Chucks
395 LOT: Assorted Lathe Insert Cutter Holders
396 LOT: Assorted New Face Mills, Insert Style
397 LOT: Cart with Large Assortment Insert End Mills, End Mills, Assorted Cutters
398 LOT: Assorted Drill Bits, End Mills, Taps, etc. on (1) Pallet
399 LOT: (6) Huot Indexes with Contents of End Mills, Drill Bits, Reamers
400 LOT: (10) Indexes with Contents of Drill Bits, Taps, etc.
401 LOT: Contents of Loft above Inspection Room including Large Quantity Steel Shelving, End Mills, Drill Bits, Reamers, Assorted Fixtures
402 Zoller Measure Fascination Optical/Digital Tool Presetter Model Smile 40016 Type SM16/4-00114, S/N N/A (2007)
403 Lyndex Corp. / Elbo Controlli Digital Tool Presetter Model E238, S/N 5717 (2000), with Digital Controller, on Starrett Granite Surface Plate
404 Romer Cimcore Portable Coordinate Measuring Machine Series 3000i Model 3024, S/N 3024-189V, with CPU, Probe & Case
405Zeiss Coordinate Measuring Machine Model Contura G2 HTG, S/N 200804501485, 48 in. x 56 in. x 28 in. (est.) Capacity, 62 in. x 76.5 in. Drilled & Tapped Granite Base, MSR Mini 6 Position Multi-Sensor Rack, Dual Joystick Controller, CPU with Printer, Dedicated Air Dryer
406 Brown & Sharpe Micro Val Coordinate Measuring Machine, S/N 0396-1119, 18 in. x 24 in. Drilled & Tapped Granite Base
407 Bendix Cordax 1808 Vertical Arm Coordinate Measuring Machine
408 Fowler Trimos Altia 24 in. Digital Height Gauge
409 Fowler 24 in. Double Column Height Gauge, with Wood Case (like new)
410 Starrett Flush Reading Vernier Height Gauge
411 LOT: (2) Digital Height Gauges
412 LOT: (5) Double Column Dial Height Gauges
413 LOT: (2) 6 in. x 6 in. Granite Dial Indicator Stands with Indicators
414 Wilson Rockwell Hardness Tester Model 3JR, S/N 3JR-257
415 LOT: Renishaw QC20-W Ball Bar System & Z-Axis Accessory Kit
416 LOT: Approx. (6) Bore Gauges
417 LOT: Approx. (6) Bore Gauges
418 LOT: Approx. (6) Bore Gauges
© 2017 PPL Group LLC 02/27/2017 01:44 PM
419 LOT: Approx. (6) Bore Gauges
420 LOT: Approx. (6) Bore Gauges
421 LOT: Approx. (6) Bore Gauges
422 LOT: (3) Small Bore Gauges
423 LOT: Approx. (6) Bore Gauges
424 LOT: Approx. (6) Bore Gauges
425 LOT: Approx. (6) Borematic & Holematic Gauges
426 Fowler Bore Gauge Master Setting Kit
427 LOT: (2) Mitutoyo 18 in. Absolute Digimatic Calipers
428 LOT: (2) Mitutoyo 18 in. Absolute Digimatic Calipers
429 LOT: (2) Mitutoyo 18 in. Absolute Digimatic Calipers
430 LOT: (2) Mitutoyo 18 in. Absolute Digimatic Calipers
431 LOT: (2) Mitutoyo 18 in. Absolute Digimatic Calipers
432 LOT: (3) Fowler 24 in. Digital Vernier Style Calipers
433 LOT: (2) 24 in. Vernier Style Calipers
434 LOT: (2) Vernier Style Calipers - 42 in. & 24 in.
435 LOT: (5) Small Digital Calipers
436 LOT: (6) Dial Calipers - 12 in. & 6 in.
437 Set of Sherr Tumico Outside Micrometers
438 Set of Starrett Outside Micrometers
439 Set of Outside Micrometers
440 Set of Outside Micrometers
441 LOT: (2) Outside Micrometers
442 LOT: (4) Outside Micrometers
443 LOT: Anvil, Disk & Assorted Digital Micrometers
444 LOT: Assorted Depth Gauges, Inside Micrometers, Ring Gauges, etc.
445 LOT: Assorted Blade Micrometers
446 LOT: (3) Assorted Precision Levels - Starrett & Mitutoyo
© 2017 PPL Group LLC 02/27/2017 01:44 PM
447 LOT: Digital Scale, Refractometers, Electrical Testers, Sound Gauges, Mitsubishi GP-20
448 Tool Setting Fixture
449 LOT: Assorted Plug & Pin Gauges
450 LOT: Assorted Gauge Blocks & Ball Gauges
450A LOT: Magnaflux Ultraviolet Inspection Light with Penetrator & Developer
450B LOT: Assorted 1-2-3 Blocks
450C LOT: Broach Kits, Universal Tool Head, Grinding Fixture, Hardness Testing Instruments
451 LOT: Contents of (2) Shelving Units - Large Assortment Plug Gauges
452 LOT: Contents of (2) Shelving Units - Large Assortment Plug Gauges
453 LOT: Contents of (6) Shelving Units - Large Assortment Plug Gauges, Ring Gauges, Repairable Calipers & Misc. Fixtures
454 LOT: (2) Rolling Tool Boxes with Contents of Plug & Ring Gauges, Misc. Inspection Items
455 LOT: (3) Angle Plates, (2) V-Blocks
456 1/4 Ton C&M Shop Hoist Electric Hoist
457 48 in. x 84 in. x 12 in. Granite Surface Plate
458 36 in. x 48 in. x 6 in. Granite Surface Plate
459 36 in. x 48 in. x 6 in. Granite Surface Plate with Steel Fixtures on Steel Stand
460 LOT: (2) Granite Surface Plates - 24 in. x 36 in. x 5 in. and 24 in. x 36 in. x 6 in.
461 LOT: (2) Granite Surface Plates - 24 in. x 36 in. x 6 in. and 18 in. x 24 in. x 2 in.
462 Jet JDP-10 Bench Top Drill Press
463 LOT: (3) Steel Cabinets & (2) Work Benches with Contents of Machine Parts & Misc. Tooling
464 Large Contractors Job Site Storage Cabinet
465 Technifor Dot Peen Marking Machine Model X Range XF500, with Keyboard
466 LOT: Work Bench & Parts Cabinet with Contents of Boring Bars, Lathe Accessories, Tooling & Chuck Jaws
467 LOT: Steel Cabinets & Shelving Units with Contents of Large Quantity of Fasteners, Nuts, Bolts, Chuck Jaws, etc. (on back wall of CNC room)
468 LOT: Rolling Kennedy Tool Box with Contents of Misc. Tools, (6) Assorted Small Steel Tables
469 LOT: Kennedy & Waterloo Rolling Tool Boxes with Contents of Tools & Tooling
470 LOT: (6) Waterloo Rolling Tool Boxes
471 LOT: Cantilever Rack with Contents of Raw Material - Also Secondary Rack - Bar Stock, Round Stock, Flat Stock, Steel & Aluminum
© 2017 PPL Group LLC 02/27/2017 01:44 PM
472 Mima Accu Stretch 60 in. Rotary Pallet Stretch Wrapper
473 Lantech Pallet Stretch Wrapper Head
474 LOT: Large Quantity Steel Shelving Units, Tables, Rolling Carts
475 Powermatic Drill Press Model 1150
476 American Metal Wash Parts Wash Cabinet Model 1000-1, S/N 96-653, 28 in. x 35 in. x 8 in. Deep Wash Basket, with Portable Loading Table
477 LOT: (2) Steel Tables with Flex Arm Drill Holders
478 LOT: Contents of Bathroom Roof including Aluminum Walk Plank, Black Beauty Concrete Power Screed, Dust Collector
479 LOT: (6) Assorted Vending Machines
480 LOT: Contents of Office including (4) Desks, Chairs, Printer, (2) Computers, Supplies
481 LOT: Contents of Loft above Rear Offices including Office Furniture, Transformers, Machine Parts, Parts Bins, etc.
482 LOT: Contents of Lower Rear Offices including Furniture (new in box) and Misc.
483 LOT: Steel Shelving, Work Benches, Tables, etc.
484 LOT: Steel Shelving Units, (3) Pallets with Contents of Machine Parts, Fixtures & Hardware
485 Contrx 1/2 Ton Free Standing Jib with C&M 1/2 Ton Electric Hoist
486 Instapak Speedy Packer 2-Component Foam In Bag Carton Packing Machine, S/N 5P3-6939
487 Bobcat Skid Steer Loader Model S175, S/N S30115787, Diesel, Auxiliary Hydraulics, Quick Detach Bucket, Rack with Forks
488 Skid Steer Fork Attachment
489 JCB 6000 lb. All-Wheel Drive Yard Forklift Model 930, S/N N/A, Diesel, Manual
490 JLG 26 ft., 750 lb. Electric Scissor Manlift Model 2646E2, S/N N/A, 42 in. x 84 in. Platform with Slide-out Extension, Joystick, On-Board Charger
491 2000 Ford Single-Axle Flat Bed Contractors Body Truck, VIN 3FDNF65H1YMA31543, Diesel (cracked block), 7-Speed Manual, Duals (motor apart - does not run)
492 Genie 45 ft., 500 lb. Dual Fuel Boom Manlift Model Z-45/22, S/N Z-45/002827 (1995), 27 in. x 70 in. Platform, 3445 hours (indicated)
493 John Deere Loader Backhoe Model JD310-A, S/N N/A, 3549 hours (indicated), with Fork Rack with Forks, 88 in. General Purpose Bucket
494 Clark 3500 lb. Diesel Forklift Model DCS171, S/N G138I-0047-6493FA-7130-3234, Solid Rubber Tires, Overhead Guard, 123 in. Lift of 2-Stage Mast
495 Caterpillar 4000 lb. (est.) LP Forklift, Solid Tires, Overhead Guard, 3-Stage Mast (no tank)
496 Caterpillar 4700 lb. LP Forklift Model GC25K, S/N AT82C-00783, Solid Rubber Tires, Overhead Guard, 187 in. 3-Stage Mast (no tank)
497 Crown 5000 lb. Electric Forklift Model FC4515-50, S/N 9A155793, Solid Rubber Tires, Overhead Guard, 3-Stage Mast (#2)
498 Crown 5000 lb. Electric Forklift Model FC4515-50, S/N ----78
499 Crown 4500 lb. Electric Pallet Truck Model WP2335-45, S/N 5A351900
© 2017 PPL Group LLC 02/27/2017 01:44 PM
500 Crown 3000 lb. Stand-up Electric Forklift Model RC3020-30, S/N 1A201323 (#CFT4)
501 Crown 4500 lb. Electric Pallet Truck Model 2335-45, S/N 5A397755
502 Exide Gold 36 Volt Battery Charger
503 Exide System 3000 36 Volt Battery Charger
504 Silver Star 36 Volt Battery Charger
505 LOT: Battery Charging Station with (2) 36 Volt Battery Forklifts
506 BHS Portable Forkliftable Electric Forklift Battery Handling System
507 LOT: (4) Tombstone Fixtures (must be removed from pallet by buyer)
508 LOT: (5) Tombstone Fixtures (must be removed from pallet by buyer)
509 Gardner Denver 100 HP Rotary Air Compressor Model EBPOMC, S/N 183631, 4610 hours (indicated), Auto Sentry ES Solid State Control
510 Ingersoll Rand 100 HP Rotary Air Compressor Model SSREP100, 36,000 hours (indicated)
511 Gardner Denver 94 HP Rotary Air Compressor Model VS70, 45,872 hours (indicated), Solid State Controls
512 Great Lakes Air Refrigerated Air Dryer Model GTX-600A-436, S/N 32451
513 Gardner Denver 100 HP Electra Saver Rotary Air Compressor (not installed), with Dryer
514 American Lincoln LP Rider Floor Scrubber Model 7700/505-202, S/N 750308
515 Safety Kleen Parts Wash Station Model 44.1
516 Culligan Reverse Osmosis Water Treatment System
517 Portable Gantry with 3 Ton Coffing Electric Chain Hoist
518 Tennant Floor Machine
519 Tilt Master Push-Around Hydraulic Lifter
520 Crown Electric Hydraulic Die Lift
521 Enerpac H-Frame Hydraulic Press
522 LOT: Dock Plate, Forklift Boom
523 LOT: (3) Shop Hoists
524 Vintage John Deere 317 Tractor
525 LOT: (2) Steel Cabinets with Forklift Parts, Floor Jack, Jack Stands, Battery Tester, etc.
526 LOT: (6) Assorted Machinery Skates
527 LOT: (9) Sections 7 ft. Wide x 36 in. Deep x 12 ft. & 14 ft. Tall Pallet Rack with Contents of Machine Parts, Forklift Wheels, etc.
© 2017 PPL Group LLC 02/27/2017 01:44 PM
528 LOT: Liftable Cage & Steel Racks with Contents of Fixtures & Large Quantity of Electric Motors
529 LOT: (6) Sections Assorted Pallet Rack with Contents of Electrical, Machine & Forklift Parts
530 LOT: (2) Induction Furnace Coils & Pallet of Batteries
531 LOT: Work Bench, Cabinets, Job Box with Contents of 6 in. Vise, Electrical Devices & Plumbing Supplies
532 LOT: (2) Work Benches, Parts Bins, Steel Cabinets with Contents of Wire, Electrical Supplies, Welding Supplies, etc.
533 LOT: (2) Steel Work Benches, Parts Bins, Cabinet with Contents of Wire Dolly, Electrical Wire, Winch Parts, Tool Box with Tap Accessories, Large Quantity Hardware
534 LOT: 60 in. x 120 in. x 1 in. Steel Fabrication Table with 8 in. Jaw Vise & Fan
535 LOT: Contents of Upper & Lower Office including Computer Supplies & Components, Electronics, Desk, Chairs, Tables, etc.
536 LOT: Steel Shelving, (4) Work Benches with Contents of Hardware, Plumbing Supplies, 6 in. Jaw Vise, Assorted Tooling
537 LOT: (3) Sections Assorted Bolt Together Rack with Contents of Fixtures & Hose
538 Electric Cable Hoist
539 Coffing 1/2 Ton Electric Chain Hoist
540 Dayton 2 Ton 360 Free Standing Jib, with 2 Ton Chain Hoist
541 LOT: Approx. (45) Steel Parts Baskets, Collapsible Wiretainers, Steel Cage
542 LOT: Approx. (50) Steel Parts Baskets, Collapsible Wiretainers
543 LOT: Pneumatic Planishing Hammer
544 LOT: (4) Steel Cabinets, (2) Steel Work Stations with Contents of Band Saw Blades, Abrasive Wheels, First Aid Supplies, etc.
545 LOT: Approx. (10) Pedestal Fans
546 LOT: Approx. (8) Small Steel Tables & (2) Work Benches
547 LOT: Fairbanks Toledo In-Ground Scale & Small Counting Scale with Shared DRO
548 LOT: (2) Rolling Self Dumping Hoppers
549 LOT: (2) Rolling Self Dumping Hoppers
550 LOT: (2) Rolling Self Dumping Hoppers
551 LOT: (2) Rolling Self Dumping Hoppers
552 LOT: (2) Rolling Self Dumping Hoppers
553 LOT: (2) Rolling Self Dumping Hoppers
554 LOT: (2) Rolling Self Dumping Hoppers
555 LOT: (2) Self Dumping Hoppers
© 2017 PPL Group LLC 02/27/2017 01:44 PM
556 LOT: (2) Self Dumping Hoppers
557 LOT: (2) Self Dumping Hoppers
558 LOT: (2) Self Dumping Hoppers
559 LOT: (2) Self Dumping Hoppers
560 LOT: (2) Self Dumping Hoppers
561 LOT: (2) Self Dumping Hoppers
562 LOT: (2) Self Dumping Hoppers
563 Vibratory Tumbler
564 LOT: (13) Sections 20 ft. x 4 ft. x 4 ft. Racking
565 LOT: (3) Steel Fabrication Tables
566 Free Standing I-Beam Jib with C&M 1/2 Ton Electric Hoist
567 Free Standing I-Beam Jib with C&M 1/2 Ton Electric Hoist
568 LOT: (8) Sections 8 ft. Wide x 4 ft. Deep x 16 ft. High Bolt Together Pallet Rack
569 LOT: (2) Portable Mortar Mixers, (1) Power Float
570 LOT: 12 in. Wire Pallet Surrounds on (3) Pallets
571 LOT: (5) Banding Carts with Tools
572 LOT: (2) Pallet Jacks
573 LOT: (2) Pallet Jacks
574 LOT: (3) Pallet Jacks
575 LOT: Large Assortment Chemicals including Imerys Premix, Hydobord, Sno-Tex Clay, Salt, etc.
576 LOT: Steel Shelving Units, Tables, Work Benches with Contents of Vise, Hardware, Misc. Mold Making Supplies
577 Pneumatic Chain Hoist
578 Pneumatic Chain Hoist
579 C&M 3 Ton Electric Chain Hoist
580 LOT: (4) Sections 20 ft. Pallet Rack
581 C&M 2 Ton Electric Chain Hoist
582 C&M 2 Ton Electric Chain Hoist
583 C&M 2 Ton Electric Chain Hoist
© 2017 PPL Group LLC 02/27/2017 01:44 PM
584 C&M 2 Ton Electric Chain Hoist
585 Hydraulic Tilt Bin
586 4 ft. x 4 ft. Floor Scale with DRO
587 C&M 1 Ton Electric Chain Hoist
588 LOT: Approx. (15) Rolling Steel Material Carts
589 LOT: Assorted Roller Conveyor with Turntable
590 LOT: (7) Sections 8 ft. Wide x 4 ft. Deep x 20 ft. High Bolt Together Pallet Rack, and Steel Rack (behind pallet rack)
591 LOT: Shelving Units, (2) Steel Work Benches, Steel Cabinet
592 LOT: Free Standing Overhead Crane System with (3) C&M Electric Hoists - (1) 2 Ton & (2) 1 Ton
593 LOT: (13) Rolling Material Carts
594 10 ft. x 7 ft. Fan Type Paint Spray Booth, with (2) Overhead Parts Hanger Hoists, Motor Driven Fan in Stack
595 LOT: (12) Sections 8 ft. Wide x 4 ft. Deep x 15 ft. High Bolted Pallet Rack
596 LOT: Contents of Bathroom Roof including Cable, Wire, Machine Parts, Hose, Blast Pot, etc.
597 LOT: (6) Induction Furnaces, (7) Sets Aluminum Flasks (outside)
598 Kinergy Corp. Cone Shaker (outside)
599 LOT: I-Beams, Pipe, Wire Baskets, Hoppers (outside in yard)
600 LOT: Fuel Tank, Forklift Man Basket (outside)
601 Dust Collector (outside)
602 LOT: Heavy Equipment Wheels & Tires (outside)
603 Forklift Man Basket (outside)
604 LOT: Approx. (50) Steel & Wire Baskets (outside)
606 LOT: Contents of Front Offices including Desks, Chairs, File Cabinets, Refrigerator, Microwave Oven, Executive Furniture, (10) Computers, Shredder, Printers, Office Supplies, etc.