gt power - the only choice when reliability,

GT POWER - The only choice when reliability, value and perfect power are on your checklist

This new series has been designed from the ground up to provide the ultimate solution for your portable power requirements. If the lowest price generator on the market is what you are set on buying, please stop reading now and start preparing yourself for a lot of heartache and pain - both to the wallet and also to your personal circumstances. It is impossible to built a quality generator at a bargain basement price and GT POWER will not accept any compromises on quality in doing what is necessary to provide the best value and reliability in the market.

This is why GT POWER have a huge number of returning customers in the market today, customers who have experienced and appreciated the fact that “when you need a generator to go”, it is that moment when it starts and powers everything up correctly and efficiently, that the decision to purchase quality is really highlighted as a very important one.

GT POWER traditional style generators provide “super clean” power at less than 5% THD! *

So what is THD and why does it matter to me? THD stands for “Total Harmonic Distortion” and is a measurement of the quality of power. Typical mains power has a THD of less than 5%. Anything greater than 5% can damage sensitive electronic circuits, cause static in speakers, cause lights to flicker etc. It is very common in most lesser quality generators than GT POWER for THD levels to be up around 15% and some bargain basement models even up to 25%! High THD levels are an unseen “appliance killer” and is something to be very aware of. Generally, if THD lev-els are not advertised, it can safely be assumed that this is due to the fact that they are much greater than 5% - and a very detrimental and negative factor in a generator.

What allows GT POWER to have so much better power output/low THD? Factors that influence THD are primarily in the quality of the alternator construction and excitation process, as well as the controlling electronics for frequency and voltage. The special quality, solid construction and attention to detail that GT POWER machines have included in these areas ensure that the THD levels are exceptionally low. Of course, the manufacturing cost is much higher to achieve this, but we are committed to providing you with the best. After all, what does the small saving on a bargain basement generator look like when it blows up a valuable appliance!

For reliability and clean power for the long term future - choose GT POWER!

* On selected models

GT POWER Patented Alternator Technology

When selecting a generator it’s easy to feel left in the dark when it comes to knowing what to look for. The selection guide included in this brochure will enable you to make the correct decision.

COPPER WINDINGS The alternator is the heart of every generator, so higher quality alternators equal higher quality power. All GT Power generators come with industrial copper windings in the alternator opposed to aluminium.

Copper is much more conductive than aluminium which lasts longer and produces much more stable power. This reduces the risk of generated power damaging any items you run off your generator.

TRADITIONAL STYLE GENERATORSGT POWER traditional style generators provide “super clean” power at less than 5% THD!* They produce power by using a gasoline engine to rotate a large alternator at 3000RPM.

It is important that the revo-lutions are exactly 3000RPM as this produces an electri-cal frequency of 50Hz. Tra-ditional generators are not designed to power sensi-tive electronic equipment because this frequency can fluctuate with the engine RPM. If you need to power sensitive electronics, refer to the GT POWER INVERTER SE-RIES.

INVERTER GENERATORSAn Inverter Generator is normally used where power is re-quired for sensitive electronic equipment like PCs, TVs and instrumentation. They are also chosen when portability or

size is important and where noise must be kept to a mini-mum. Inverter generators are the next step up from the low ‘THD’ models and are able to produce a perfect sine wave at varied engine revolutions. This is done by filtering the raw power through a large inverter circuit board. This gives the generator the abil-ity to idle down when power requirement is low, saving you fuel.

www.gtpower.co.nz 3.

*On selected models

CHOOSING A GENERATOR

kW vs kVA EXPLAINEDElectrical power can be commonly expressed in kilowatts (kW) or kilo volt ampres (kVA). Both units are a measure of voltage multiplied by current flow, which equates to elec-trical power. In an alternating current circuit (AC) which is common for most electrical power equipment, the voltage or current may delayed by the properties of the electrical circuit causing the alternating current and voltage to be-come out of synchronisation (known as out of phase). If the alternating voltage and current flow do not peak at the same time, the total real power available in the circuit will be reduced. kVA expresses maximum potential power in a circuit with the voltage and current alternating uniformly, while kW measures real power available, taking into the account the phase difference between the voltage and current.

The difference between the kVA and kW in a circuit is called ‘power factor’ which is expressed as a decimal i.e- 0.8. Power factor of 0.8 would mean that only 80% of the kVA is available as usable kW. E.G 10kVA x power factor of 0.8 = 8kW. The power factor is dependent on the proper-ties of a complete circuit, so for a generator application the power factor is dependent on the type of load connected to the generator. Because the power factor is determined by the load operated, GT Power generators are rated with the kW/kVA rating being equivalent e.g 5.5kW = 5.5kVA. If low power factor is significant for a load, generally the input power rating will be in kVA. If a load input power re-quirement is rated in watts (w) or kW, generally the load has a high power factor or the manufacturer has made al-lowances for the power factor in the input rating.

Note: Power factor has nothing to do with load efficiency or load start up rating.

The top graph with the greater phase difference means the appliance is relatively inefficient and the kVA rating will be higher than the kW. The lower graph shows an appliance with a lesser phase difference, meaning the kVA and kW requirement will almost be identical.

KEY:

Appliance with Poor Power Factor Typically: Electric Motors, Welders etc.

Appliance with Good Power FactorTypically: Light bulbs, Heaters etc.

What do you need to power?

4. www.gtpower.co.nz

POWER REQUIREMENTS

CALCULATING YOUR TOTAL POWER NEEDSThe list on the following page offers a guide on the wattages used on most common appliances and items used at home and in the workplace. For exact figures we recommend you check the nameplate or instruction manual for your individual appliances. Also listed (where applicable) is the “starting wattage” or “surge wattage” which is the amount of wattage needed to start an appliance with a motor. This may be up to three times the wattage required to run the appliance, so this must be taken into consideration.

All generators also have a maximum and rated wattage output. GT POWER Generators are designed to work at their maximum rating for up to half an hour. Rated power is the level where the generator can be operated continuously and is typically 90% of maximum power.

The GT POWER Portable Generator Range includes machines that range from 2500W to 8500W.

Other generator selection criteria includes:• Weight/portability• Operatingsoundlevels• Enginetype(2stroke,4strokeordiesel)• Fuelcapacity• Startingsystem(electricorEZstartrecoil)• Investmentcost.


CAUTION! Operating voltage and frequency requirement of all electronic equip-ment should be checked prior to plugging them into the generator. Damage may result if the equipment is not designed to operate within a +/- 10% voltage variation, and +/- 3 Hz frequency variation from the generator specification ratings.

1. Firstly list all items requiring power simultaneously.

2. Then add up all the “running wattage” requirements for all items.

3. Add to that total the highest of the “starting wattages” you listed down. This total must be less than the generators rated running power output.

4. Next, identify the device with the highest starting power demand in Watts. Add this value to the running power demands of the other devices. This total must be less than the generators rated starting power output.

Tool or Running Starting Appliance Watts Watts

1.

2.

3.

4.

5.

Total Running Watts

Highest Starting Watts

= Generator Power Needs

POWER REQUIREMENTS

AVERAGE POWER REQUIREMENTS

Important Note: Always select a generator that has more capacity than your load requirements. The small amount extra you may invest to do this will be quickly recovered with the fuel saving and longer service life gained by not having to constantly run your generator at full load.

This chart lists average power requirements. Your particular tool or appliance may require more or less than the listed wattage. For exact wattages, check the data plate or owner’s manual on the item you wish to power. Where START wattage is the same as RUN wattage, this signifies no additional power is required for starting.

TOTAL RUNNING WATTS + HIGHEST STARTING WATTS = GENERATOR POWER NEEDS

Appliances / Tools Approx Approx Run Start

Microwave 750W 750 1200

Coffee Maker 1750 1750

Electric Clothes Drier 5750 5750

Washing Machine 1150 2300

Refrigerator 700 2200

Lights 100 100

Colour Television 350 350

Electric Frypan 1500 1500

Dehumidifier 400 400

Computer Desktop 700 700

VCR 50 50

Dishwasher - Cool Dry 700 1400

- Hot Dry 1450 2000

Toaster - 2 Slice 1250 1250

- 4 Slice 1600 1600

Freezer 2200 2500

Hair Dryer 800-1700 800-1700

Steam Iron 1800 1800

Garage Door Opener - 1/4 HP 550 1100

- 1/3 HP 725 1400

Radio 200 200

Blender 375 500

Sump Pump - 1/2 HP 1050 2150

Well Pump - 1/2 HP 1000 2100

Household Water Pump 1200 2700

Appliances / Tools Approx Approx Run Start

Central Air Conditioner:

10,000 BTU 1500 2200

24,000 BTU 3800 5000

32,000 BTU 5000 6500

Room Air Conditioner

10,000 BTU 1500 2200

Circular Saw 7 1/4” 1400 2300

Chainsaw 2HP 1100 2500

Portable Air Compressor 1200 3600

Hand Drill 1/2” 600 900

Drill 1/2” 600 900

Battery Charger 15A 500 700

Electric Welder 200A AC 9000 9000

Jigsaw 300 400

Electric Weed Trimmer 500 650

Router 1000 1300

Belt Sander 1000 1300

Table Saw 10” 1750 4250

Bench Grinder 1400 2450

Concrete Mixer 3.5c/f 1900 2500

Band Saw 1100 1350

Power Drill - Medium 1000 1200

- Heavy Duty 1500 1800

Angle Grinder - 100mm 1000 1200

- 230mm 2400 5000

ALTERNATOR / GENERATOR END

The alternator consists of two parts, the rotor and the stator. The rotor (which is coupled to the motor and rotates) sits inside the stator. The quality and assembly of these two components is crucial to the operation and longevity of a portable generator.

Many inferior generator manufacturers use lower quality materials to save cost in this area. One prime example of this is the use of aluminium windings in the stator.

All GT POWER Generators use premium quality copper windings to ensure ultimate performance and durability. Usually, if a manufacturer doesn’t state this fact, copper is not being used.

GT POWER Generator housings are bolted directly to the engine, providing precise rotor and stator alignment. All GT POWER Series generators process their power through heavy duty AVR (automatic voltage regulator) modules. This means reliable voltage output regardless of the load applied to the generator. The GT POWER Series use the latest generation AVR technology which ensures smooth and reliable power.

POWERDYNE ENGINE TECHNOLOGY

If you are choosing a generator to perform under pressure and be there for the long haul, the last thing you will want to do is compromise on the engine. At GT Power we have exclusively chosen the trusted POWERDYNE engine to provide the solid ‘day in, day out’ performance and reliability that we demand. POWERDYNE engines are especially engineered for professional power equipment and set the standard for power output, fuel efficiency and durability. Just some of the features that ensure POWERDYNE engines lead the pack are:

- Chrome Piston Rings

- OHV Technology

- Low Oil Alert Systems

- High Efficiency Industrial

Air Cleaner Systems

- Precision Ballbearing Supported Crankshafts

- EZStartRecoilSystem

- Solid State Electronic Ignition

- Large ‘Anti-Vibe’ Isolation Mounts

- Heavy Duty Mufflers

- Excellent Power to Weight Ratios

POWERDYNE engines carry a full 24 month commercial warranty.

If you are a professional ask for POWERDYNE quality, don’t settle for a lesser engine!

POWERDYNE ENGINES - Professional Power and

Guaranteed Performance!

OPERATING NOISE LEVELS The GT POWER range of generators operate at 50-70dBA. This chart will give you an idea of what this level represents.

= The GT POWER Range

140130120110100908070

Close jet aircraft, Artillery fire

Thresh-hold of pain, causes ear damage

Diesel engine room

Heavy traffic in tunnel

Live concert, chainsaw

Subway train

Busy road

Normal street, average radio

Deafening

Deafening

Extremely Loud

Extremely Loud

Very Loud

Very Loud

Loud

Loud

6050403020100

Normal conversation

Normal office

Soft office

Soft office

Calm room

Leaves rustling

Thresh-hold of hearing

Moderate

Moderate

Faint

Faint

Very Faint

Very Faint

Totally Quiet


POWER REQUIREMENTS

...for safe powering of sensitive electronics!

Synchronises 2 units for output up to 3400W!

(#16757)

2000W 8.7 1600W 4 Stroke OHV 51dB EZ Start /Recoil 5.4L 8hrs 1 500 x 280 x 450 20kg

With 2000W maximum output the GT2000i is our most popular generator for campervans. Compact, lightweight and only 20kg, the GT2005i invertergenerator provides clean, portable power that’s perfect for the campground or any outdoor activity where you need your own perfect electrical supply.

Designed to run quietly, the GT2005i is the preferred choice for life-stylers and has a huge following among those who hold outdoor events such as music festivals and film sets.

With a maximum output of 2000W, and a parallel function taking it right up to 3400W, the GT2005i provides enough power to run a desktop or laptop computer, X-box, TV, compact refrigerator, or a small air conditioning unit.

• 2000W(max.)poweroutput, 1600W (cont.) power output

• Powerdyne4stroke,air cooled, OHV industrial engine

• 1x10A,240Voutlet,1x8.3A,12Voutlet

• ElectronicignitionandEZstartrecoilwithfuel primer button - starts easy!

• In-builtUSBchargingportforcellphones and media players

• Upto8hoursruntime

• Whisperquiet-only51dB!

• Supercompactat20kg.


POWER REQUIREMENTS

3300WGT3500i

• 3300Wmax.3000Wcont.(6000Winparallelmode)• Perfectforconstructionsitesoremergencieswhere

perfect power is essential• Idealforbatterychargers,drills,grinders,saws&lighting• Robustandportable,weighinginat34kg• Quietoperation-68dBatfullload• Parallellink-capableforupto6000Woutput• Twin230Voutlet+12VDCOutlet• 9litretankforupto6hrsrun-time• Fuelsavingsmartthrottlefeature• Recoilstartforreliability• 2yearwarranty.

Built heavy duty for where performance is essential. With its 9hp industrial motor for industrial reliability, the GT3500i is the ideal generator for the demanding needs of a construction site or your house in an emergency. Pumping out a maximum of 3300W and up to 6000W with the optional parallel kit, this machine is suitable for running a huge range of power tools and appliances safely with its pure sine wave. The GT3500i is the construction worker’s / contractor’s best friend - with its ability to run drop saws, lighting, sensitive electronics, drills and even a small welding machine (in parallel mode). Light enough for a one man lift, this unit goes anywhere to power nearly everything without a fuss.

3300W 14.3 3000W 4 Stroke OHV 68 EZ Start/Recoil 9L 6hrs 2 484 x 420 x 417 34kg

3300WGT3500SE

3300W 14.3A 3000W 4 Stroke OHV 65 Electric/Recoil 10L 6hrs 2 578 x 440 x 510 45kg

• 3300Wmax.3000Wcont.(6000Winparallelmode)• Idealforfarmers,constructionsitesandrecreational

vehicles• Heavydutywheelsforeaseofuse• Whisperquietoperation-only65dBatfullload• Parallellink-capableforupto6000Woutput• Twin230Voutlet• 10litretankforupto6hrsrun-time• Electric/recoilstart• 2yearwarranty.

The new GT3500SE is the latest edition to the Digital Inverter Series, featuring heavy duty wheels for ease of use and portability and electric start with recoil back up for ultimate dependability. Whisper quiet operation creates a super low 65dBA at full load. With a 10 litre fuel tank and a maximum output of 3300W this machine will be your working partner, right through your required task - big or small.

SINGLE PHASE - 230V

Late Model Battery Chargers

Require Pure Sine Wave

Late Model Battery Chargers

Require Pure Sine Wave

SINGLE PHASE - 230V

INVERTER GENERATORS


INVERTER GENERATORS


#16757


#16757

The ‘built for work’ characteristics of the GT POWER range are embodied in the industrial tubular steel frame and the long range fuel tank. The GT2600 includes all the unique GT POWER features like industrial air cleaner & muffler system – for cleaner quieter operating, superior quality alternator & automatic voltage regulator (AVR) – for more stable power output and low oil alert with automatic engine shut down. Perfect for powering most powertools, household appliances and heaters or even boiling the jug.

2800W GENERATORGT2600

Single Phase - 230V

2800W 12.2 2500W 4 Stroke OHV 72 Recoil 15L 12.5hrs 2 - 625 x 490 x 510 45kg

The functional Electric Start complements the industrial quality of the GT3000ES. This machine includes all the unique GT Power features like industrial air cleaner & muffler system, superior quality copper wound alternator & automatic voltage regulator (AVR), low engine oil alert with automatic engine shutdown. Combine these benefits with the premium build quality of GT Power and you have a machine that provides sterling service for a lifetime! Ergonomic handles and heavy duty solid wheel kit with rubber tyres for portability make the GT3000ES ideal for using at the home, farm or construction site.

3100W GENERATORGT3000ES

with electric start

3100W 13.5 2800W 4 Stroke OHV 72 Electric/Recoil 15L 15hrs 2 - 625 x 490 x 510 48kg

Single Phase - 230V

The functional Electric Start complements the industrial quality of the GT3600ES. This machine includes all the unique GT Power features like industrial air cleaner & muffler system, superior quality copper wound alternator & automatic voltage regulator (AVR), low engine oil alert with automatic engine shutdown. Combine these benefits with the premium build quality of GT Power and you have a machine that provides sterling service for a lifetime! With the capability of running a drop saw and all powertools the GT3600ES is ideal for the home workshop or garage.


with electric start

3800W 16.5 3200W 4 Stroke OHV 72 Electric/Recoil 15L 14hrs 2 - 625 x 490 x 510 50kg

Single Phase - 230V

CONVENTIONAL GENERATORS



Three Phase - 400V, Single Phase - 230V

Single Phase - 230V

The 25L fuel tank and the industrial quality of the GT5600ES will keep you in power all day. The GT5600ES includes all the unique GT Power features like industrial air cleaner & muffler system, superior quality copper wound alternator & automatic voltage regulator (AVR), low engine oil alert with automatic engine shutdown. Combine these benefits with the premium build quality of GT Power and you have a machine that provides sterling service for a lifetime! With the capability of running multiple powertools or household items the GT5600ES is ideal for running the bach, farm shed or emergency back-up power.

The large 25L fuel tank and industrial quality of the GT7000ES will keep you in power all day. This machine includes all the GT Power features like industrial air cleaner & muffler system, superior quality copper wound alternator & automatic voltage regulator (AVR) and low engine oil alert with automatic engine shutdown. Combine these benefits with the premium build quality of GT Power and you have a machine that provides sterling service for a lifetime! With the capability of running multiple powertools, lights and industrial equipment, the GT7000ES is ideal for running the bach, farm shed or emergency back-up power. Featuring an inbuilt RCD and twin 15A outlets this machine is ready to tackle the toughest task including powering a welding machine up to 150A.


with electric start

The GT7000/3 includes all the unique GT Power features like industrial air cleaner & muffler system, superior quality copper wound alternator & automatic voltage regulator (AVR), low engine oil alert with automatic engine shutdown. Combine these benefits with the premium build quality of GT Power and you have a machine that provides sterling service for a lifetime! Equipped with twin 15A single phase outlets and a PDL 56 Series 3 phase outlet, the GT7000/3 is capable of running multiple power tools, lights and industrial equipment, welding equipment, grinders, water pumps or nearly anything onsite or on the farm!

SINGLE PHASE - 3 PHASE 7000W GENERATOR

GT7000/3with electric start

7000W 27 6500W 4 Stroke OHV 70 Electric/Recoil 25L 13hrs 2 - 725 x 545 x 605 88kg

400V-7000W 27 400V-6500W 4 Stroke OHV 70 Electric/Recoil 25L 13hrs 3 - 725 x 545 x 605 88kg 230V-7000W

230V-6500W

Single Phase - 230V


with electric start

5500W 23.9 5000W 4 Stroke OHV 72 Electric/Recoil 25L 9.5hrs 2 - 725 x 545 x 605 81kg


WORKSITE COMPLIANT

WORKSITE COMPLIANT


The large 25L fuel tank and the industrial quality of the GT10000ES will keep you in power all day. With all the unique GT POWER features like industrial air cleaner & muffler system, superior quality alternator, automatic voltage regulator (AVR) and low oil alert, this state of the art generator empowers you to tackle any task!

This machine is the Big Boy in the range and packs a serious punch - being able to power a small house, workshop or a work site. Also the ideal generator for back-up power in natural disasters. Featuring a heavy duty outlet plug with adapter cord for maximum generator output - the GT10000ES is suitable for power tools, appliances, food carts and even a welding machine up to 200A.


with electric start

8500W 35 7500W 4 Stroke OHV 70 Electric/Recoil 25L 8hrs 2 - 745 x 545 x 605 94kg


High Capacity 25L Fuel Tank with Easy Grip Fuel Cap

Solid, no Flat Wheels for Rugged Worksites

Less than 5% THD(Total Harmonic Distortion)

Powerdyne Professional Engine Technology

Industrial Air Cleaner and Muffler System

Heavy Duty Steel Roll Frame

Professional Series Control Panel with RCD

Monster 32A, 230V Single Phase Power Outlet with 15A Adapter Cord

WORKSITE COMPLIANT

Single Phase - 230V1 x 230V Outdoor

Power Outlets

RCD (Residual Current Device)

35A

RCD

32A15A

OFF

ON

ENGINE SWITCHON

STARTOFF

GND

T

OFFV. A. P. Hz. H.

OIL

AC 230VA C 230VGT10000ES

Low Oil Warning Light

5 Function Meter

Earth Terminal

AC Circuit Breaker

EngineIgnition Switch

15A Circuit Breaker

32A Circuit Breaker

DIGITAL 5 FUNCTION METER DISPLAYS:Output Voltage in Volts (V)Output Current in Amps (A)Output Power in Watts (W)Output Frequency in Hertz (Hz)Total Operating Hours (H)

Monster 32A, 230V Single Phase Power Outlet with 15A Adapter Cord


WELDER GENERATOR

The 18L fuel tank and the industrial quality of the GT200W can keep you welding and generating power all day.

With all the unique GT POWER features like industrial air cleaner & muffler system, superior quality alternator, automatic voltage regulator (AVR) and low oil alert with automatic engine shutdown, the GT200W empowers you to tackle the toughest of tasks! Featuring electric start with recoil back-up, this machine is a workhorse you can depend on.

5500W200A 5000W 97 18L 1 96kg780 x 545 x 6328hrs75V

OPEN CIRCUIT VOLTAGE

WELDING GENERATING

200A WELDER - 5500W GENERATOR

GT200W WELDER / GENERATOR

The GT5500D includes all the unique GT Power features like industrial air cleaner and muffler system, superior quality copper wound alternator, automatic voltage regulator (AVR) and low engine oil alert with auto engine shut down. The premium build quality of GT Power provides sterling service for a lifetime!

Equipped with twin 15A single phase outlets, the GT5500D is capable of running multiple power tools, lights and industrial equipment. Ideal for farmers, contractors or anyone with a ready supply of diesel.

5500W DIESEL GENERATORGT5500D

with electric start

5500W 35A 5000W 4 Stroke OHV 97dBA Electric/Recoil 14.5L 13hrs 2 - 685 x 520 x 595 112kg

Single Phase - 230V

• Dualwelding/generatingfunction

• 1x32A230Monstersinglephaseoutletwithadaptercord

• Standard“Tex”weldingconnectors

• Willrun1.6-5.0mmelectrodes

• Runpowerequipmentupto5500W - including a 9” angle grinder!

• Robustandportable

• Fully-weldedtubeframe&wheelkit

• Comeswithelectricholderandearthclamp.


• SuperdutysinglecylinderPowerdyne diesel engine

• Twin15Aoutlets

• Electricandrecoilstartforreliability

• Fullyweldedindustrialtubeframeforlongevity

• No-flatwheelsandfoldablehandlesforeasy transport across rough work sites

• 14.5Lfueltankforupto13hrsruntime!

DIESEL GENERATOR

Electric/Recoil

WORKSITE COMPLIANT

www.gtpower.co.nz 13. www.gtpower.co.nz 13.

DIGITAL HRMETER

GT2005i GT3500i GT3500SE GT2600

GT3000ES GT3600ES GT5600ES GT7000ES

GT7000/3 GT10000ES GT5500D GT200W

GT2005i 2000W 8.7A 1600W 4 Stroke OHV 51 EZ Start / Recoil 5.4L 8hrs 2 500 x 280 x 450 20kg

GT3500i 3300W 14.3A 3000W 4 Stroke OHV 68 EZ Start / Recoil 9L 6hrs 2 484 x 420 x 417 34kg

GT3500SE 3300W 14.3A 3000W 4 stroke OHV 65 EZ Start / Recoil 10L 6hrs 2 578 x 440 x 510 45kg

GT2600 2800W 12.2A 2500W 4 Stroke OHV 72 Recoil 15L 12.5hrs 2 - 625 x 490 x 510 45kg

GT3000ES 3100W 13.5A 2800W 4 Stroke OHV 72 Electric / Recoil 15L 15hrs 2 625 x 490 x 510 48kg

GT3600ES 3800W 16.5A 3200W 4 Stroke OHV 72 Electric / Recoil 15L 14hrs 2 625 x 490 x 510 50kg

GT5600ES 5500W 23.9A 5000W 4 Stroke OHV 72 Electric / Recoil 25L 9.5hrs 2 730 x 556 x 610 81kg

GT7000ES 7000W 27A 6500W 4 Stroke OHV 70 Electric / Recoil 25L 13hrs 2 725 x 545 x 605 88kg

GT7000/3 400V - 7000W 28A 400V - 6500W 4 Stroke OHV 70 Electric / Recoil 25L 13hrs 3 725 x 545 x 605 88kg 230V - 7000W 230V - 6500W

GT10000ES 8500W 35A 7500W 4 Stroke OHV 70 Electric / Recoil 25L 8hrs 2 745 x 545 x 605 94kg

GT5500D 5500W 27A 5000W 4 Stroke OHV 97 Electric / Recoil 14.5L 13hrs 2 685 x 520 x 595 112kg

GT200W 5500W 200A 5000W 4 Stroke OHV 97 Electric / Recoil 18L 8hrs 1 780 x 545 x 632 96kg

COMPARING SPECIFICATIONS

The Fuel Treatment for all Engines

FUEL SET

Regular Use of Fuel Set:

Maintains and Cleans Fuel Tanks

Improves Fuel Performance

Improves Fuel economy

Reduces Maintenance

Prolongs the Life of Engine Parts

Reduces Emissions

Revitalises Stagnant Fuel

Prevents Fuel Bugs and Fungal Growth

Prevents Fuel System Corrosion

Helps Prevent Diesel from Waxing Up in Freezing Conditions

Initial Treatment: Add GT POWER FUEL SET to tanks before filling. Use at a mix ratio of 1:500, i.e. 200ml of Fuel Set for 100L of fuel. If contamination is heavy, the intial dose should be doubled. Overdosing is not harmful to burners.If the fuel is stagnant, add more Fuel Set, then stir or add more fuel to mix.

Ongoing Maintenance: Use GT POWER FUEL SET each time you fill up to maintain your fuel system in top condition. The minimum dosage rate of Fuel Set to fuel is 1:4000, i.e. 10ml of Fuel Set for 40L of fuel, 15ml for 60L, 20ml for 80L and 25ml for 100L.

Many industrial or commercial problems can be seen or heard - rust, corrosion, friction, etc; but there is a silent, unseen enemy causing havoc in your fuel tank - and this is water. You may not know you have a problem until your engine stops, your vehicle fails its WOF or your fuel filter clogs up leaving you stranded.

Water, the source of most engine problems, is present in most fuel systems in small quantities, often due to condensation. Water reacts with chemicals in the fuel at the point of combustion, forming acid compounds that cause gums, resins and other contaminates to separate and foul fuel systems, especially injectors. Effects include power loss, increased fuel consumption, oil contamination and general deterioration of fuel systems causing serious and costly damage to engines.

Water, left untreated separates from the fuel and provides an environment where fungi flourish. GT POWER FUEL SET absorbs water into the fuel allowing it to burn off harmlessly into the atmosphere. Engine parts - pumps, injectors and jets - are machined to fine tolerances so it is easy to see how contaminants cause power loss, increase fuel consumption, oil contamination and general deterioration.


GT Power Fuel Set

• SuperDutyMouldedFittings

• 2.5mmCopperCable

• 15APlug

• 28ARatedContinuousUse

• ANZSApproved

• 15mLength

• Forhighcurrentapplicationssuch as induction motor startups and welding equipment

• 12MonthWarranty.

28A Rated Super DutyExtension Cord

WhydoIneedHeavyDuty2.5mmCable? Working on a job site often requires power equipment. In most cases, this is going to require using extension cords.

When powering heavy duty equipment such as air compressors, welders, and waterblasters etc., a heavy duty extension cord with 15A plug must be used. Regular and other so-called “heavy duty” extension cords only use 1.5-2.0mm internal cable, this is insufficient for high power draw seen in welders, waterblasters, air compressors and other industrial equipment.

The risks of running an inferior or lighter duty extension cord are usually expensive and involve blown circuit boards and motor capacitors, burnt out motor windings and in extreme cases, fire.

A 15A must be used to guarantee a long life from your equipment and prevent expensive electrical failure with no downtime of your valuable assets.

Phase: Single

Voltage: 230/240V

Voltage (max): 450V

Amperage rating: 28A

Plug: NZ15A Single Phase

Duty Cycle: 100% @28A

Cable Diameter: 3 x 2.5mm

Cable Material: Copper

Insulation Class: IP44

Length: 15m

Weight: 6kg


COMPARING SPECIFICATIONS

gt power - the only choice when reliability,

Documents