1*
Genex Assistant Software Installation
*
The Genex Probe and Genex Assistant for drive tests are part of the Genex series. The Genex series can work with many systems, such as GSM, WCDMA, EDGE, CDMA, and WiMAX. The modules for the WCDMA and GSM systems have found wide commercial use.
The Genex series is now developed to V200R002SPC140 to serve the WiMAX system. And it can support Sequans, GCT, Runcom, Beceem chips now.
The Genex series uses the following tools to provide a platform for the network planning and optimization software of Huawei:
Drive test tools
Set-up the Project
Import the engineer parameters, open the map window and import the logfile
Open the information windows;
Genex Assistant Software Installation
Memory: 1 GB
Apply or update for the license and hard dog.
*
Genex Assistant Software Installation
*
Set-up the Data Set
name for the Project
*
*
Execute the EP
2. Browse the logfile folder
3. Choose the logfile then open
*
5. Import the logfile
*
Genex Assistant Software Installation
Right Click on the Parameter
*
*
3. Input the layer and then open
2. Add the layer
*
*
Choose the Primary serving for CINR and RSSI
*
Choose the Preamble index to show
*
Right Click to show
Right Click to show