guide to lighting retrofit

LIGHTING COMPONENTS, INC.

Replacement Plastics

Strip Fixture Conversions

Troffer and Surface Fixture

Conversions

New Technology Upgrades

Guide to Lighting Retrofit

Guide toLighting Retrofit

Troffer & Surface Fixture Conversions

Strip Fixture Conversions

New Technology Upgrades

Replacement Plastics

• Dramatically expand the project scope with Advanced Retrofit Solutionsfrom A.L.P. Lighting.

• Turn optical efficiency into bottom-line improvements.

• Maximize energy savings per investment dollar.

• Add cutting edge aesthetic design to existing facilities at a fraction of the cost of new fixture installation.

Advanced Retrofit Solutionsfrom A.L.P. Lighting — it’sjust the beginning. Contactyour representative forcomplete project developmentsupport.

www.alplighting.com • (877) 257-5841© 2008 A.L.P. Lighting Components, Inc., Printed in U.S.A., RETROGUIDE 0508

Lighting retrofit remains the most powerful energy conservation tool available to the industrial and commercial propertyowner or manager. Technology continues to speed ahead, delivering attractive paybacks in buildings constructed only afew years ago. A.L.P.’s Advanced Technology Retrofit solutions expand the developer’s palette to deliver energy performanceand distinct aesthetic upgrades. It is now possible to update a building to tomorrow’s standard—optically, ergonomicallyand electrically—at a fraction of the cost of a fixture replacement. We recommend following a few simple steps to improvethe results of your project:

Know Your Application: Note the typical fixture spacing and mounting height, along with the type of task performed inthe space.

A Picture is Worth 1000 Words: With the lamps turned off, photograph the fixture exterior and interior with a detailedimage of the end of the fixture as well as the door frame latch and hinge.

Add “Fixture Type” to the Lighting Survey: Clearing a path for many of the more advanced kits often requires thedesigner to differentiate between fixture types, even if they fit the same generic description. The best way to identifyfixtures with generally similar characteristics is by noting the shape and location of the fasteners used to secure the door,louver or ballast cover.

Custom Designs: Many solutions provided by A.L.P. are designed to fit a wide variety of fixture housings, but the moresophisticated the upgrade, the more likely a custom solution will be required. Following the steps above will help to definethose applications that require custom designs. Custom designs are subject to a design fee and the product cost is often afunction of the specific project quantity. Most custom design work will require the customer to submit a fixture from theproject site.

Visit us at www.ALPLIGHTING.com for the latest product information.

Getting Your Retrofit Right!Getting Your Retrofit Right!

CASEX 41LHTwo 4' Lamps covert to one 4' T5 or T8 Lamp

CASEX 84LHTwo 8' Lamps convert to four 4' T5 or T8 Lamps

CASEX 82LHTwo 8' Lamps convert to two 4' T5 or T8 Lamps

For the most cost effective, easy-to-transport strip conversion, A.L.P.offers the CAS-Express. This simple kit upgrade provides tool-lessmaintenance. An ideal solution to the challenge of converting a stripfixture into the energy efficient lighting we need now. The CAS-Expressfits all 4” to 4.25” 1, 2 and 4 lamp strip fixtures and is in stock for pickup or delivery.

Order CASEX 84LH

Double Lamp T12 to Four T5 or T8 Lamps

Order CASEX 82LH

Single Lamp T12 to Two T5 or T8 Lamps

Converts to

Converts to

Convert-A-Strip Configurations

CAS ExpressCAS Express Convert 1 or 2 Lamp 8’ T12s to 4’ T5s or T8s

Features• Ballast Cover pre-punched for

quarter turn fastener• Made from pre-painted white

steel with 91% Reflectance• Quality bi-pin lampholders

provided with “LH” designation

Benefits• Provides easy method to

upgrade existing strips• No special tooling required• Lampholder brackets and

ballast cover assembled on sitefor ease of handling

• Meets U.L. #1598 standards

CATALOG NO. DESCRIPTION

CASEX 82LHT5 CAS EXP. T5 (2) 4' Lamp Tandem Includes (2) CASEXCOVER,(2) RW 502T5, (1) RW 511T5, (4) RQTF-S, (6) RA8, (4) lampholder

CAS EXP. T5 (4) 4' Lamp Tandem Includes (2) CASEXCOVER,(2) RW 502T5, (1) RW 522T5 (4) RQTF-S, (6) RA8, (8) lampholder

CASEX 84LHT5

CASEX 82LH CAS EXP. T8 (2) 4' Lamp Tandem Includes (2) CASEXCOVER,(2) RW 501, (1) RW 511, (4) RQTF, (6) RA8, (4) lampholder

CASEX 41LHT5 CAS EXP. T5 (2) 4' Lamp Tandem Includes (1) CASEXCOVER,(2) RW 502T5, (2) RQTF-S, (4) RA8, (2) lampholder

CASEX 41LH CAS EXP. T8 (2) 4' Lamp Tandem Includes (1) CASEXCOVER,(2) RW 501, (2) RQTF, (4) RA8, (2) lampholder

CASEX 84LH CAS EXP. T8 (4) 4' Lamp Tandem Includes (2) CASEXCOVER,(2) RW 501, (1) RW 522, (4) RQTF, (6) RA8, (8) lampholder

CAS EXP. T5 (6) 4' Lamp Tandem Includes (2) CASEXCOVER,(2) RW 502T5, (1) RW 522T5, (4) RQTF-S, (6) RA8, (12) lampholder

CASEX 86LHT5

CAS ExpressCAS Express Convert 1 or 2 Lamp 8’ T12s to 4’ T5s or T8s

Used as a Single Socket

RW 501

Used as a Double Socket

RW 501

Single Lamp Socket Plate

RW 511

Lamp SocketAlignment Clip

RAAC

Tek Screws

RA8

¼Turn Fastener

RQTF-S

¼Turn Fastener

RQTFRW 522T5

Double LampSocket Plate for T5

Double Lamp Socket Plate

RW 522 RW 502T5

Double or SingleSocket Plate for T5

RW 511T5

Single Socket Plate for T5

Accessories Details

For 6' or 8' applications an optionalalignment / filler is available.

CenterCap

AlignmentClip

Lampholdersnot included

RA8 Tek Screw1or 2 Lamp Standard 4 - 1/4"

Socket Plate #RW 501

RA 2002

RA 2003

RA 2004

RA 2006

(1) RA 2002 2' Reflector (Anodized), (4) TEK Screws



(2) RA 2003 3' Reflector (Anodized), (8) TEK Screws(2) RAAC Alignment Clips, (1) RA 275 Center Caps

RA 2008 (2) RA 2004 4' Reflector (Anodized), (8) TEK Screws(2) RAAC Alignment Clips, (1) RA 275 Center Caps

2'

3'

4'

6'

8'

Note: For Highly Reflective Aluminum, Delete Prefix "RA" and Replace with "RM" or for White Aluminum Delete "RA" and Replace With "RW".

RW 501RW 511RW 522RAACRA 275

1 Lamp Standard 4-1/4" Wide Socket Plate & (2) TEK Screws1 Lamp Center Socket Plate & (2) TEK Screws2 Double Lamp Canter Socket Plate (2) TEK ScrewsClear Plastic Alignment ClipCenter Cap

ACCESSORIES

CATALOG NO. DESCRIPTION LENGTH

2000 SeriesReflector2-Lamp Strip

2000 Series Reflectors are formaximizing light output fromtypical 2-lamp fluorescent striplighting fixtures. They can be usedto convert from 8' to 4' lamps by usingour optional socket plates. Optionalfinishes are also available. They aredesigned and manufactured in compliancewith U.L. Standards for retrofit reflectors.

2000 Series Reflector2000 Series Reflectorfor Quick, Simple Retrofit of 2-Lamp Strip Fixture

To ensure properenclosure is maintained,reuse existing ballastcover or mate thisreflector with theCASEX assembly.


COEFFICIENTS OF UTILIZATION

Room 0CavityRatio 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 00

0 93 93 93 93 91 91 91 91 87 87 87 84 84 84 80 80 80 781 86 83 80 77 84 81 79 76 78 76 74 75 73 72 72 71 69 682 79 74 69 65 77 72 68 64 69 66 62 67 64 61 65 62 60 583 73 66 60 55 71 64 59 55 62 57 54 60 56 53 58 55 52 504 67 59 52 47 66 58 52 47 56 50 46 54 49 46 52 48 45 445 62 52 45 41 60 51 45 40 50 44 40 48 43 39 47 42 39 376 57 47 40 35 55 46 40 35 45 39 35 44 39 35 42 38 34 337 53 42 36 31 51 42 36 31 41 35 31 39 34 31 38 34 30 298 49 38 32 27 47 38 32 27 37 31 27 36 31 27 35 30 27 259 45 34 28 24 44 34 28 24 33 28 24 32 27 24 31 27 23 2210 42 31 25 21 41 31 25 21 30 25 21 29 24 21 29 24 21 20

10CEILING CAVITY REFLECTANCE

80 70 50 30

8-9/16"

2"

Efficiency:RA: 86% SpecularRM: 94% SpecularRW: 90% Diffuse White

Alignment Clip

Tek Screws

¼Turn Fastener

*Lamp SocketSingle Lamp Socket Plate Double Lamp Socket Plate

Used as a Double SocketUsed as a Single Socket

RW 511

RW 501 RW 501 RQTF RAAC

RA8RW 522


RA 5204 (Kit)INCLUDES

(2) 4' Lamp converts to (1) 4' T8 Lamp (Anodized Aluminum)

(4) TEK Screws, (2) 1/4 Turn Fasteners, (2) Lamp Sockets for RA 5204

4' Reflector (1 Per Kit)Single or Double Socket Plate (2 Per Kit)

Also:Note: For Highly Reflective Aluminum, Delete Prefix "RA" and Replace with "RM" or for White Aluminum Delete "RA" and Replace with "RW".

RA 5004RW 501

*


INCLUDES

RA 5108 (Kit)RA 5208 (Kit)

(1) 8' Lamp converts to (2) 4' T8 Lamps (Anodized Aluminum)(2) 8' Lamp converts to (4) 4' T8 Lamps (Anodized Aluminum)

4' Reflector (2 Per Kit)Single or Double Socket Plate (2 Per Kit)Single Lamp Center Socket Plate for RA 5108 (1 Per Kit)Double Lamp Center Socket Plate for RA 5208 (1 Per Kit)

Also: (6) TEK Screws, (4) 1/4 Turn Fasteners, (2) Alignment Clips(4) Lamp Sockets for RA 5108 or (8) Lamp Sockets for RA 5208

RA 5004RW 501RW 511RW 522

*

5000 Series Kitfor Strip Lamps

Convert 4-1/4“ wide strip fixturesto 1 or 2 T8 lamps easily, quicklyand economically.*

A.L.P. offers two out-standing reflector kitsto retrofit 8’ or 4’ stripfixtures to moreefficient T8 lamps.

The 5000Series Kit is

a completereflector system,including socket

plates for lamprelocation, to provide

maximum efficiency. Usedto either improve the usablereflected light or to delamp

fluorescent strip fixtures. Thisretrofit system allows for removal

and discarding of the ballast cover,relocation of lamps, optimizing light

output and reducing energy consumptionto comply with utility rebate requirements.Designed and manufactured in compliance

with U.L. Standards for retrofit reflectors. The 5000 Series is U.L. Classified as a ballast cover.



5204 KITTwo 4' Lamps covert to one 4' T8 Lamp

5208 KITTwo 8' Lamps convert to four 4' T8 Lamps

for Kit 5204

Use RW 511

Includes twolamp endsocket platesfor convertingtwo 4' lamp tosingle 4' lamps

for Kit 5108

Includes singlelamp centersocket plate forconverting a single 8' lampto two 4' lamps Use RW 511

for Kit 5208

Includes doublelamp centersocket plate forconverting two8' lamps tofour 4' lamps Use RW522

4-3/4"

9-1/4"

2-1/2"

2-1/4"

RoomCavityRatio 70 50 30 10 70 50 30 10 50 30 10

0 104 104 104 104 102 102 102 102 97 97 971 97 93 90 87 94 91 88 85 87 85 832 89 82 77 72 86 80 75 71 77 73 703 82 73 66 61 79 72 65 60 69 64 594 75 65 58 52 73 64 57 52 61 56 515 68 57 50 44 66 56 49 44 54 48 436 63 51 44 38 61 50 43 38 49 42 387 58 46 38 33 56 45 38 33 44 37 338 53 41 33 28 51 40 33 28 39 33 289 48 37 29 24 47 36 29 24 35 29 2410 45 33 26 21 44 33 26 21 32 25 21

CEILING CAVITY REFLECTANCE80 70 50



The compound acrylic and high reflectancemetal reflector system of the A.L.P. KCACR Retrofit Kit delivers a new level ofperformance and control for open lampluminaires.

KC ACR Easy-Bracket• Easy-to-Install

Clip

Flexible: Engineered to upgrademost strip and industrialluminaires with either T5 or T8lamps.

Effective: Linear AcrylicReflector combines precisereflection and refraction tomanage brightness whiledelivering evenly distributedindirect illumination.

Dramatically reduced contrastratios and source brightnesscontrol improves visualperformance.

Efficient: Total luminaireefficiency exceeds 90%.

Attractive: Virgin acrylic prismgeometry adds sparkle to anyapplication.

KC ACR™KC ACR™ Compound Acrylic Retrofit Solutionsfor T5 and T8 Strip / Industrial Retrofit Kit


2 Lamp T5 Acrylic / Miro Reflector Kit

4-ft Kits

2 Lamp T8 Acrylic / Miro Reflector Kit

1 Lamp T8 Acrylic / Miro Reflector Kit Incl (1) Reflector, (2) RW 501, (4) Clips,(2) Acrylic Refractors

Incl (1) Reflector, (2) RW 501, (4) Clips,(2) Acrylic Refractors

Incl (1) Reflector, (2) RWT5 501T5, (4) Clips,(2) Acrylic Refractors

Incl (1) Reflector, (2) RWT5 501T5, (4) Clips,(2) Acrylic Refractors

Incl (2) Reflector, (2) RW 501, (1) RW 511,(4) Clips, (2) Joiner Clips (4) Acrylic Refractors

Incl (2) Reflector, (2) RW 501, (1) RW 522,(4) Clips, (2) Joiner Clips (4) Acrylic Refractors

Incl (2) Reflector, (2) RW 501T5, (1) RW 511T5,(4) Clips, (2) Joiner Clips (4) Acrylic Refractors

Incl (2) Reflector, (2) RW 501T5, (1) RW 522T5,(4) Clips, (2) Joiner Clips (4) Acrylic Refractors

(2) Acrylic side Panels, (4) Clips

(4) Acrylic side panels, (4) Clips, (2) Joiner Clips

KCACR RMT8 1

KCACR RMT8 2

KCACR RMT5 2

1 Lamp T5 Acrylic / Miro Reflector KitKCACR RMT5 1

4 Lamp Tandem T5 Acrylic / Miro Reflector Kit

Tandem 8-ft Kits

Acrylic Refractor Kit Only

4 Lamp Tandem T8 Acrylic / Miro Reflector Kit

2 Lamp Tandem T8 Acrylic / Miro Reflector KitKCACR RMT8 1TAN

KCACR RMT8 2TAN

2 Lamp Tandem T5 Acrylic / Miro Reflector KitKCACR RMT5 1TAN

KCACR RMT5 2TAN

4-ft Acrylic Refractor with ClipsKCACR4

8-ft Acrylic Refractor with ClipsKCACR8

Note: For Standard Specular Aluminum, Delete Prefix "RM" and Replace with "RA" or for DiffuseWhite Aluminum Delete "RM" and Replace With "RW".

6.17.78.0

100.0

7.27.593.9

38.368.492.04.54.2

5.8

35.964.286.4

3284124285351

24090-13090-15090-1800-180

90-120

0-400-600-90

36614922

12492047

%LUMINAIRE0-30 21.9 23.3

ZONEZONAL LUMEN SUMMARY

LUMENS %BARELAMP



0 110100

110 110 110 107 107 107 107 100 100 1001 95 91 87 96 92 88 85 87 83 812 90 82 75 70 87 80 73 68 75 70 663 82 72 54 57 79 70 62 56 66 59 544 75 63 55 48 72 61 54 47 58 51 465 69 56 48 41 66 55 47 41 52 45 406 63 51 42 36 61 49 41 35 47 40 357 59 46 37 32 56 45 37 31 42 36 308 55 42 34 28 53 41 33 28 39 32 279 51 38 30 25 49 37 30 25 36 29 2410 48 35 28 23 46 34 27 23 33 27 22


Candlepower Curve

0º 15º 30º

45º

60º

75º

90º

600

1200

1800

ITL Report NumberITL54966

6.67.98.2

100.0

7.07.389.3

32.863.991.84.94.4

5.9

29.357.182.0

3354014155091

25290-13090-15090-1800-180

90-120

0-400-600-90

32551672

4675

%LUMINAIRE0-30 990 17.4 19.5


LUMENS %BARELAMP



0 105 105 105 105 101 101 101 101 95 95 951 94 89 85 81 91 86 83 79 81 78 752 84 77 70 64 81 74 68 62 70 64 603 76 66 58 52 73 64 57 51 60 54 494 69 58 49 43 67 56 48 42 53 46 415 63 51 43 36 61 50 42 36 47 40 356 58 46 37 31 56 44 36 31 42 35 307 54 41 33 27 52 40 32 27 38 31 268 50 37 29 24 48 36 29 24 35 28 239 46 34 26 21 45 33 26 21 32 25 2110 43 31 24 19 42 31 24 19 29 23 18


Candlepower Curve

450

900

1350

0º 15º 30º

45º

60º

75º

90º

ITL Report NumberITL54967

KC ACR™KC ACR™ Compound Acrylic Retrofit Solutionsfor T5 and T8 Strip / Industrial Retrofit Kit

KCACR RWT8 248Lamps: (2) F32T8 / SP35 Linear FluorescentBallast: Sylvania QT2X32 T8/120 ISN-SC

KCACR RMT8 248Lamps: (2) F32T8 / SP35 Linear FluorescentBallast: Sylvania QT2X32 T8/120 ISN-SC

Accessories and Options:Perforated BasketPerforated metal reflectors and baskets are made of cold rolled steeltreated with rust inhibitor. Perforated metal parts are post paintedwith a durable baked polyester powder coat. Each piece is formed byour state-of-the-art multi-radii machinefor consistency.

Fine Fluted BasketThe acrylic basket option providesgreater light output while diffusinglight for a glare controlled look.Consistency is the keyto a quality design.

Socket Conversion Kits Converta 4-1/4' Strip Fixture into one-or two-lamp T8. 4' and 8' Kitsavailable.

Note: All RW 501, RW 511 and RW 522 socket plates use slide-onlampholders. Do not use snap-in lampholders.

SmoothWhite Lens

Fine FlutedLens

Perforated

Basket Options

UniversalEnd PlateRW 501

Double LampSocket PlateRW 522

Single LampSocket PlateRW 511

End view showing reflector configuration and lampholder location

4.25

6.1012.2

1.83

5.15

Through the artof perforated metalsand modern lines,these easy-to-installkits accommodatedifferent mountingconfigurations, depending onyour needs. No matter whichmodel you choose, you areguaranteed a simple, beautiful andcost-effective solution with KC2100.

KC2100 SeriesBy choosing from reflectortypes and basket materials,the lighting designer controlsthe light intensity. TheKC2100 Series can be usedto retrofit a flush-mountedstrip or a hanging strip.

KC2100 SeriesKC2100 Series Urbanus Direct/Indirectfor Strip Fixture Retrofit

KC2100 Direct / Indirect Series — Urbanus

Accessories / Options

White 4' Perf Reflector with Perf Basket KitWhite 4' Perf Reflector with Smooth White Lens KitWhite 4' Perf Reflector with Fluted Lens KitWhite 8' Perf Reflector with Perf Basket KitWhite 8' Perf Reflector with Smooth White Lens KitWhite 8' Perf Reflector with Fluted Lens Kit

KC21WPRPB4KC21WPRSWA4KC21WPRFL4KC21WPRPB8KC21WPRSWA8KC21WPRFL8

KC2100 Series Continuous Row Mount Kit4' Socket Conversion Includes (2) Universal End Plates8' Socket Conversion Includes (2) Universal End Plates, (1) 2-Lamp Center Socket Plate and (1) 1-Lamp Center Socket Plate

KC21CRMKC2S4KC2S8

KC2100 SeriesKC2100 Series Urbanus Direct/Indirectfor Strip Fixture Retrofit

1.21.2

100.0

0.90.981.0

42.476.498.8

1.10.9

34.461.980.1

5454

4700

5390-15090-1800-180

90-120

0-400-600-90

199335904646

54.445.740-90 265222.518.260-90 1056

%LUMINAIRE0-30 1202 20.7 25.6


LUMENS %BARELAMP



0 96 96 96 96 94 94 94 94 90 90 90 86 86 86 82 82 82 801 88 84 81 77 86 82 79 76 78 76 73 75 73 71 72 70 69 672 81 74 69 64 78 73 68 64 70 66 62 67 63 60 64 61 59 573 74 66 60 55 72 65 59 54 62 57 53 60 56 52 58 54 51 494 68 59 52 47 66 58 51 46 55 50 46 53 49 45 52 48 44 425 63 53 46 40 61 52 45 40 50 44 40 48 43 39 47 42 39 376 58 47 40 35 56 47 40 35 45 39 35 44 38 34 42 38 34 327 54 43 36 31 52 42 36 31 41 35 31 40 34 30 38 34 30 288 50 39 32 27 48 38 32 27 37 31 27 36 31 27 35 30 26 259 46 35 29 24 45 35 28 24 34 28 24 33 28 24 32 27 24 2210 42 31 24 20 41 30 24 20 30 24 20 29 23 20 28 23 20 18


80 70 50 30

Candlepower Curve

200

0

400

600

800

1000

1200

1400

1600

0º 90º

0º 5º 15º 25º 35º

45

55

65

75

85

KC21 WRFL4Direct LuminaireSolid White Reflector6" Wide Curved Linear Prismatic LensLamps: (2) F32T8Rated Lumens: 2900

Through the art of perforated metals and modern lines, theseeasy-to-install kits accommodate different mounting configurations,depending on your needs. No matter which model you choose,you are guaranteed a simple, beautiful and cost effective solutionwith KC2200.

KC2200 SeriesSophisticated styling in an indirect luminaire. The KC2200 Seriesoffers a wide, even, indirect illumination, providing extraordinaryvisual comfort in the contemporary open office environment, withstyling to enhance a lobby or highlight a public area. Perforatedreflector panels with soft white in-lay provide a distinctive,contemporary look and allow an identifiable source of light forvisual comfort.

Accessories and Options:Perforated BasketPerforated metal reflectors and baskets are made of cold rolled steeltreated with rust inhibitor. Perforated metal parts are post paintedwith a durable baked polyester powder coat. Each piece is formed byour state-of-the-art multi-radii machine for consistency.

KC2200 Direct / Indirect Series — Alveus


KC2225 White 2' Indirect Perforated Basket AssemblyKC2225 White 4' Indirect Perforated Basket AssemblyKC2225 White 8' Indirect Perforated Basket Assembly

KC22WIPB2KC22WIPB4KC22WIPB8

KC2200 Series Continuous Row Mount KitKC22CRM

End view configuration14.52

4.75

1.10

4.38

KC2200 SeriesKC2200 Series Alveus Direct/Indirectfor Strip Fixture Retrofit

KC2200 SeriesKC2200 Series Alveus Direct/Indirectfor Strip Fixture Retrofit

72.892.8100.0

63.580.987.2

2.54.87.2

27.223.8

2.24.25.3

368546945059

137990-15090-1800-180

90-120

0-400-600-90

128245365

4.74.140-90 2372.42.160-90 120

%LUMINAIRE0-30 76 1.3 1.5


LUMENS %BARELAMP



0 85 85 85 85 73 73 73 73 52 52 52 33 33 33 15 15 15 61 77 73 70 67 66 63 61 58 45 43 42 28 27 26 13 12 12 52 70 64 59 55 60 55 51 48 39 37 35 25 23 22 11 10 10 43 64 56 50 45 55 49 44 40 35 31 29 22 20 18 10 9 8 34 58 49 43 38 50 43 37 33 31 37 24 19 17 16 9 8 7 35 53 44 37 32 46 38 32 28 27 23 21 17 15 13 8 7 6 26 49 39 32 27 42 34 28 24 24 20 18 15 13 11 7 6 5 27 45 35 28 24 38 30 25 21 22 18 15 14 11 10 6 5 5 28 41 31 25 20 35 27 22 18 19 16 13 12 10 9 6 5 4 29 38 28 22 18 33 25 19 16 18 14 12 11 9 8 5 4 4 110 35 26 20 16 31 22 17 14 16 13 10 10 8 7 5 4 3 1


80 70 50 30

Candlepower Curve

250

500

750

1000

1250

0

0 5 15 25 35 4555

65

75

85

9095

105

115

125175 165 155 145 135

250

90º0º

KC22WIPB4Deep Luminous Indirect Suspension KitPerforated Metal HousingDiffuser LinerLamps: (2) F32T8Rated Lumens: 2900

KC2300 SeriesThis graceful direct-indirect solution creates a bold luminaire, whileproviding a comfortable atmosphere. Wide winged reflectors effectivelydirect light, while adding a soft glow and presence to the fixture. Agentle up-lighting effect creates a distinctive look for task or generalapplications.

Accessories and Options:Perforated BasketPerforated metal reflectors and baskets are made of cold rolled steeltreated with rust inhibitor. Perforated metal parts are post paintedwith a durable baked polyester powder coat. Each piece is formed byour state-of-the-art multi-radii machine for consistency.

Fine Fluted BasketThe acrylic basket option providesgreater light output while diffusinglight for a glare controlled look.Consistency is the keyto a quality design.

KC2300 Direct / Indirect Series — Pegasus


White 4' Direct / Indirect Reflector Perforated Basket KitWhite 4' Direct / Indirect Reflector Fluted Lens KitWhite 4' Direct / Indirect Reflector Smooth White Lens Kit

KC23WRW4PBKC23WRW4FLKC23WRW4SWA

4' Socket Conversion Includes (2) Universal End Plates8' Socket Conversion Includes (2) Universal End Plates, (1) 2-Lamp Center Socket Plate and (1) 1-Lamp Center Socket Plate

KC2S4KC2S8

14.30

7.73

4.87


Through theart of perforatedmetals andmodern lines, theseeasy-to-install kitsaccommodate differentmounting configurations,depending on your needs.No matter which model youchoose, you are guaranteed asimple, beautiful and costeffective solution with KC2300.

KC2300 SeriesKC2300 Series Pegasus Direct/Indirectfor Strip Fixture Retrofit

SmoothWhite Lens

Fine FlutedLens

Perforated

Basket Options

KC2300 SeriesKC2300 Series Pegasus Direct/Indirectfor Strip Fixture Retrofit

25.025.0100.0

19.219.276.6

26.148.875.0

23.518.0

20.037.457.4

111111114441

104590-15090-1800-180

90-120

0-400-600-90

116021673330

48.937.440-90 217026.220.060-90 1162

%LUMINAIRE0-30 692 11.9 15.6


LUMENS %BARELAMP



0 87 87 87 87 82 82 82 82 74 74 74 67 67 67 61 61 61 571 77 72 68 65 73 69 65 62 62 59 57 56 54 51 50 48 47 442 70 63 57 52 66 60 55 50 54 50 46 48 45 42 43 41 39 363 64 55 49 44 60 53 47 42 47 43 39 43 39 36 38 35 33 304 58 49 42 36 55 46 40 35 42 37 33 38 34 30 34 31 28 255 53 43 36 31 50 41 35 30 37 32 28 34 29 26 31 27 24 226 49 39 32 27 46 37 31 26 34 28 24 31 26 23 28 24 21 197 45 35 28 23 43 33 27 23 30 25 21 28 23 20 25 21 18 178 42 31 25 20 40 30 24 20 28 22 19 25 21 17 23 19 16 149 39 29 22 18 37 27 22 17 25 20 16 23 19 15 21 17 14 1310 36 25 19 15 34 24 19 15 22 17 14 20 16 13 18 15 12 10


80 70 50 30

Candlepower Curve

200

400

600

800

0

0 5 15 25 35 4555

65

75

85

9095

105

115

125175 165 155 145 135

200

400

600

800

1000

90º

0º

KC23WRW4PBDeep Ceiling Mount LuminaireWhite Upper ReflectorWhite Perforated Metal BasketDiffuser LinerLamps: (2) F32T8Rated Lumens: 2900

7000V Series Reflector7000V Series Reflectorfor Troffer and Surface Fixture Retrofit

7000V Series Reflectorfor Troffer and Surface Fixture Retrofit

7000V Series Reflector Kit is an economical one-piece reflectorused to delamp fluorescent ceiling / grid troffers (included) torecenter lamps after delamping. This reduces energy, improvesefficiency and keeps light loss to a minimum. The 7000VReflector is designed and manufactured in compliance with U.L.Standards for retrofit reflectors.

CATALOG NO. DESCRIPTION LENGTH

RA 7022V Kit (1) RA 6022VT2 Reflector for 2' x 2' Troffer, (2) RA 400VSocket Plates, (4) TEK Screws

(1) RA 6024VT2 Reflector for 2' x 4' Troffer, (2) RA 400VSocket Plates, (4) TEK Screws

RA 7024V Kit

2’

RA 7014 Kit (1) RA 6014 Reflector for 1' x 4' Troffer, (2) RA 410 SocketPlates, (4) TEK Screws

4’

4’

NOTE: For Highly Relective Aluminum, Delete Prefix "RA" and Replace with"RM" or for White Aluminum Delete "RA" and Replace with "RW".

(1) RA 6034V Reflector for 2' x 4' Troffer, (2) RA 400V-83L, (4) TEK Screws

RA 7034V Kit 4’

7000V Series Reflector7000V Series Reflectorfor Troffer and Surface Fixture Retrofit



0 101 101 101 101 98 98 98 98 94 94 941 94 90 87 84 91 88 85 83 85 82 802 86 80 75 71 84 79 74 70 76 72 683 80 72 66 61 78 70 65 60 68 63 594 73 64 58 52 72 63 57 52 56 56 515 67 57 50 45 66 56 50 45 49 49 456 62 52 45 40 61 51 44 40 44 44 397 58 47 40 36 56 46 40 35 39 39 358 53 42 36 31 52 42 35 31 35 35 319 49 38 32 27 48 38 31 27 31 31 2710 46 35 28 24 45 34 28 24 28 24 24


ReflectorRA 6024VT2

Socket PlateRA 400V


CONTENTS: 1 RA 6022VT2 or 6024VT2 Reflector, 2 RA 400V Brackets, and 4 Tek Screws

CONTENTS: 1 6034V Reflector, 2 RA 400V-T83L Brackets, and 4 Tek Screws.


ReflectorRA 6034V

Socket PlateRA 400V-T83LCONTENTS: 1 6014

Reflector, 2 RA 410 Brackets, and 4 Tek Screws.

NOTE: RA 7014 kits do not comply to UL guidelines as a suitable wireway cover.For Type II retrofit applications a ballast cover must be used.

Assembly DetailEfficiency:RA: 86% SpecularRM: 94% SpecularRW: 90% Diffuse White

No Measuring• Kwik Change always fits perfectly• Eliminates the hassle of

mis-measured replacements

No Cutting or Special Orders• Kwik Change fits standard

grid ceilings• New Positive Latching Mechanism

makes re-lamping easy

Replace Yellowing, Damaged orGlare Producing Lenses Easilywith the Kwik Change Frame.

Easy to Install without anyspecial notching or custominstallation.

STEP 1:Remove old door framecontaining diffuser anddiscard. Raise lightfixture and shift to

the side.

STEP 2:Remove new KwikChange inner doorframe from outer KwikChange frame. Placenew Kwik Change outerframe on existing

ceiling grid.

STEP 3:Reach through openpanel and replace lightfixture on top of KwikChange Retrofit System.Install door frame withlighting diffuser and louver in outerframe and close.

Kwik Change™ Steel FrameKwik Change™ Steel FrameAn Instant Solution for Louver and Lens Replacement

Featuring a new Positive LatchingMechanism for easyre-lamping.

The Kwik Change Steel Frame now has theoption of installing a wire guard under thelens for maximum protection.

Deep Kwik Change and Shallow Kwik Change are available.

CATALOG NO. KCPL1 14SPSKCPL1 22SPSKCPL1 24SPSKCPL2 14SPSKCPL2 22SPSKCPL2 24SPSKCPL3 14SPSKCPL3 22SPSKCPL3 24SPSKCPL4 14SPSKCPL4 22SPSKCPL4 24SPSKCPL5 14SPSKCPL5 22SPSKCPL5 24SPS

DESCRIPTIONKwik Change with PL1 SpecularFinish Parabolic Louver.1/2" x 1/2" x 1/2" cell size.

Kwik Change with PL3 SpecularFinish Parabolic Louver. 3/4" x 3/4" x 1/2" cell size.

Kwik Change with PL2 SpecularFinish Parabolic Louver. 1-1/2" x 1-1/2" x 1" cell size.

Kwik Change with PL4 SpecularFinish Parabolic Louver. 3/4" x 3/4" x 1/2" cell size. Kwik Change with PL5 SpecularFinish Parabolic Louver.3/4" x 3/4" x 3/8" cell size.

KCALP120 14CAKCALP120 22CAKCALP120 24CA

Kwik Change with ALP 120Clear Prismatic Lens.

KCALP120 14CAWGKCALP120 22CAWGKCALP120 24CAWG

Kwik Change with ALP 120Clear Prismatic Lensand Wire Guard.

Kwik Change™ Universal AdapterThe Ultimate Solution for Fast Louver and Lens Replacement

Kwik Change™ Universal Adapter

No Measuring

No Cutting or Special Orders

No Need to Lift the Fixture• Adapter brackets install without

moving the existing fixture housing

• No disruption of ceiling tile or earthquake wires

• It does not get much faster

Get the Facts• Many A.L.P. louvers and RDI

products available in optional Universal Adapter (UA) version.

• UA configuration suitable for use only with mating products with Universal Adapter (UA) designation.

• For use with 15/16 t-bar systems. For other application please consult factory.

Easy to Install without anyspecial notching or custominstallation.

STEP 1:Insert UA bracketbetween T-Bar andFixture. Securewith self tappingscrew.

STEP 2:Hang Louver, RDIor Lens frame bysliding into thetrack createdin the UniversalBracket Bars.

STEP 3:Slide louver to oneend and swing upinto closedposition. Securewith cam latch.

PATENT PENDING

UA Symbol designatesavailable in Universal

Adapter version.T-Bar

T-Bar

Universal Adapter(UA) Bracket

(UA) CompatibleLouver or Door

Lamp

Universal Adapter(UA) Bracket

Louver

*SKC PLLA1-1/2“ deep Kwik Change Louver

KC PLTA2“ deep Kwik Change LouverKC PLNA2-5/8“ deep Kwik Change Louver

Nominal Size

14 — 1’ x 4’22 — 2’ x 2’24 — 2’ x 4’

14 — 1’ x 4’22 — 2’ x 2’24 — 2’ x 4’

Cells

1’ x 4’ 39 — 39 Cell2’ x 2’ 36 — 36 Cell2’ x 4’ 78 — 78 Cell

1’ x 4’ 06 — 6 Cell 08 — 8 Cell 16 — 16 Cell2’ x 2’ 09 — 9 Cell 16 — 16 Cell2’ x 4’ 12 — 12 Cell 18 — 18 Cell 24 — 24 Cell 32 — 32 Cell

Material / Finish

For optional finishes, change “SSS” in catalog number to:“SPS” for Specular Silver,“BWE” for Baked White Enamel,

To Order: Select description from each column. *Uses shallow Kwik Change Frame

Box Flange Flat Flange

Shallow KC Deep KC UniversalAdapter

Aluminum parabolic deep cell louvers provide a uniform, high efficiencylight condition. The Aluminum Kwik Change system satisfies mostrequirements where a deep cell is needed. When controlled lowbrightness is essential, you’ll find that the Kwik Change system is theanswer.

The Kwik Change system is available in a choice of depths, 1-1/2“, 2” or2-5/8”. It feature excellent V.C.P. (Visual Comfort Probability) and requireminimum maintenance. The Kwik Change Aluminum Series adheres tostrict fire and building codes and is constructed of top-grade aluminum.

The Kwik Change system is ideal for use with static, air handling andheat transfer fluorescent lighting fixtures, high efficiency lighting needs,high ceiling applications and is perfect for either new or retrofit projects.

Aluminum ParabolicAluminum Parabolic Kwik Change Louvers

Aluminum ParabolicAluminum Parabolic Kwik Change Louvers

These and otherspecial sizes andcellular patternsare available

Standard Cell Configurations

2’ x 4’ Panel

2’ x 2’ Panel

1’ x 4’ Panel

(2 x 6)12 Cell

(1 x 6)6 Cell

(3 x 6)18 Cell

(3 x 3)9 Cell

(1 x 8)8 Cell

(4 x 8)32 Cell

(4 x 4)16 Cell

(2 x 8)16 Cell

(4 x 6)24 Cell

(6 x 13)78 Cell

Lay-In Fixture Lighting Components

1. Ballast - High performance, solid state electronic ballast.

2. Lampholders - replaces broken or inoperative lampholders or for replacement when de-lamping.

3. Reflector - for 2, 3 or 4-lamp fixtures. Maintains or enhances the efficiency of a fixture when de-lamping or retaining lamps in an existing fixture.

4. Lamps - T5, T8 or T12 Fluorescent lamps

5. Kwik Change™ System - allows changing a grid ceiling fixture from lens to contemporary parabolic louver without replacing the fixture. (Deep shown.)

6. PLLA Aluminum Parabolic Louver

6a. PLNA Aluminum Parabolic Louver

1

6a

6

5

4

3

2

NLELT5222LSPSNLELT5223LSPSNLELT5242LSPSNLELT5243LSPS NEO-LUX 2x4 T5 3-lamp Specular Ass'y

NLWK222NLWK223

NEO-LUX 2x2 T5 2-lamp Specular Ass'yNEO-LUX 2x2 T5 3-lamp Specular Ass'yNEO-LUX 2x4 T5 2-lamp Specular Ass'y

NEO-LUX EL Wiring Kit 2x2 T5 2-lampNEO-LUX EL Wiring Kit 2x2 T5 3-lamp

NLWK243 NEO-LUX EL Wiring Kit 2x4 T5 3-lamp

NeoLux Face and Baffle Assembly

NeoLux Lamp Bracket and Ballast Cover Kit

NOTE: Most NeoLux conversion kits must be custom engineered to fit the application.

NEOLUX 2x2 and 2x4 3-LAMP

24"

NEOLUX 2x2 and 2x4 2-LAMP

9"24"

3.70

10.7511.75

1.57

NEOLUX 1x4 1-LAMP(Custom only)

Specifications

Optical Channel: Choice ofaluminum parabolic baffles withhigh-side flange for maximum lightand efficiency, parabolic baffles.

Face Panel: Post-painted face platefor clean appearance. Custom baffleand perforation configurationsavailable.

Luminaire Type: Customized tofit most standard recessed 1' x 4',2' X 2' or 2' x 4' luminaire

Lamps: 1, 2 and 3 T5 fluorescent.

Configurations:1, 2 & 3 Lamp

OptionsAvailable

• Fit our EL housing• Dramatic Design & Energy Upgrade for 1x4', 2x2' & 2x4' fixture• Provides excellent visual and optical performance

Blade Options: Create specific shielding and efficiency performancewith available blades.

PH58HC Type F VaneCONCAVE

BCA3.156 Type D VaneHEM BACK

PH58HX Type F VaneCONVEX

PB58HS Type F VaneSTRAIGHT

NEOLUX™NEOLUX™ T5 Direct Super Kitfor 1x4, 2x2, 2x4 Recessed

NEOLUX™NEOLUX™ T5 Direct Super Kitfor 1x4, 2x2, 2x4 Recessed

0.20.20.2

100.0

0.20.265.6

76.696.899.80.20.2

0.2

50.363.665.5

666

2658

690-13090-15090-1800-180

90-120

0-400-600-90

203625742651

%LUMINAIRE0-30 1329 32.8 50.0

ZONE

ZONAL LUMEN SUMMARY

LUMENS %BARELAMP



0 77 77 77 77 76 76 76 76 72 72 721 73 71 69 67 71 69 68 66 67 65 642 69 65 62 59 67 64 61 58 61 59 573 64 59 55 52 63 58 55 52 56 53 514 60 54 50 47 59 54 50 46 52 49 465 56 50 45 42 55 49 45 42 48 44 426 53 46 41 38 52 46 41 38 44 41 387 50 43 38 35 49 42 38 35 41 37 348 47 39 35 32 46 39 35 32 38 34 329 44 37 32 29 43 36 32 29 36 32 2910 42 34 30 27 41 34 30 27 33 29 27


Candlepower Curve

04590

90

85

80

757065

60

50

55

45

40

35

30

2520151050

0

196

393

589

786

902

1178

1375

1571

Efficiency: 66%Shielding Angle: 34º



0 91 91 91 91 88 88 88 88 85 85 851 85 83 80 78 83 81 79 77 78 76 742 80 75 71 68 78 74 70 67 71 68 663 74 68 63 60 73 67 63 59 65 61 584 69 62 57 53 68 61 56 53 59 55 525 65 57 51 47 63 56 51 47 55 50 476 60 52 46 42 59 51 46 42 50 45 427 57 48 42 38 55 47 42 38 46 41 388 53 44 39 35 49 44 38 35 43 38 359 50 41 35 32 49 40 35 32 40 35 3210 47 38 33 29 46 38 33 29 37 32 29


0.10.10.1

100.0

0.10.176.8

70.396.699.90.10.1

0.1

54.074.276.7

444

3109

490-13090-15090-1800-180

90-120

0-400-600-90

218630043105

%LUMINAIRE0-30 1374 33.9 44.2

ZONE

ZONAL LUMEN SUMMARY

LUMENS %BARELAMP

Efficiency: 77%Shielding Angle: 32º

Candlepower Curve90

85

80

7570

65

60

50

55

45

40

35

30

2520151050

0

205

410

615

820

1025

1230

1435

1640

04590

NeoLux 2x2 3-LampMiro 4 baffle blade DLamps: F14T5/841Rated Lumens: 1350

NeoLux 2x2 3-LampMiro 4 baffle blade F StraightLamps: F14T5/841Rated Lumens: 1350

TYPE D BCA3.156 TYPE F PB58HS

Specifications

Door Frame: Frameless box flange can be configured to most hingeor latch locations. Features positive latching mechanism for easyre-lamping. Door frame, deep kwik change and flange version areavailable.

Baffles: Precision parabolic blades available in any of our standardfinishes.

Perforated Diffuser: Post painted white perforated metal diffuser isroll-formed for precise radius. White acrylic inlay.

Luminaire Type: Recessed 2 X 2' or 2 x 4' for deep cell parabolic. Replaces 18 cell or 9 cell nominal 3" deep parabolic louver. Alsoavailable with Kwik Change door frame for shallower fixture bodies.

Lamps: 2 or 3-lamp T8, Biax, or T5 fluorescent.

RDI Lamp Bracket Reflector or Ballast Cover KitRDIWK222LRDIWK223LRDIWK242LRDIWK243L

RDI Wiring Kit 2x2 T8 2 LampRDI Wiring Kit 2x2 T8 3 LampRDI Wiring Kit 2x4 T8 2 LampRDI Wiring Kit 2x4 T8 3 Lamp

Kwik Change RDI Basket and Baffle AssemblyRDIKC22SSSRDIKC24SSS

RDI Kwik Change 2x2 with Specular Baffle Ass'yRDI Kwik Change 2x4 with Specular Baffle Ass'y

RDIUA22SSSRDIUA24SSS

RDI Universal Adapter 2x2 with Specular Baffle Ass'yRDI Universal Adapter 2x4 with Specular Baffle Ass'y

• Update the look of any 2 x 2’ or 2 x 4’ Deep Cell Housing with the contemporary appearance of a recessed direct/indirect luminaire

• Versatile Design - Fits most Recessed Fixtures*

• Balanced illumination from the combination of Directand Indirect elements

*For custom door frame, contact customer service

RDI 2x2, 2x4RDI 2x2, 2x4 for Recessed Direct / Indirect

RDI 2x2, 2x4RDI 2x2, 2x4 for Recessed Direct / Indirect



0 46 46 46 46 45 45 45 45 43 43 431 43 41 39 38 42 40 39 38 38 37 362 39 36 34 32 38 36 33 31 34 32 313 36 32 29 27 35 32 29 27 31 28 264 33 29 26 23 32 28 25 23 27 25 235 31 26 23 20 30 26 23 20 25 22 206 28 24 20 18 28 23 20 18 23 20 187 26 22 18 16 26 21 18 16 21 18 168 25 20 17 14 24 19 17 14 19 16 149 23 18 15 13 23 18 15 13 18 15 1310 22 17 14 12 21 17 14 12 16 14 12


Candlepower Curve

550

1100

1650

0º 15º 30º

45º

60º

75º

90º0-Deg:

45-Deg:90-Deg: EL Series 2x2

Recessed Troffer

Wiring Kit

Deep Kwik Change

RDIKC22SSS

RDI T8 3-lamp 2x4Direct / Indirect LuminaireSpecular BaffleWhite OverlayLamps: (3) F32T8Rated Lumens: 2950

Assembly Detail

Specifications

Door Frame: Frameless box flange can be configured to most hinge/latch locations. Features positive latching mechanism for easy re-lamping. Flanged version available for standard and narrow door frameinsertion. KC framed versions available.

Direct Optical Component: Precision parabolic blades available inany of our standard finishes or perforated basket version.

Diffuser: (2) White frosted acrylic diffuser panels

Reflector: Multi-radii high reflectance white reflector distributes lightthrough the acrylic diffusers eliminating lamp imaging and providinglow-brightness glow.

Luminaire Type: Customized to fit most standard recessed lensed orparabolic housings 2x2' and 2x4'

Lamps: 1, 2 or 3-lamp T8, Biax, or T5 fluorescent wiring kits available.

Reflector Option

Acrylic RDI

RDIAC22SSS-SKRDIAC24SSS-SK

RDIARK222LT5RDIARK222LT8RDIARK221LT5

AC RDI Wiring Kit and Reflector 2' 2L T5AC RDI Wiring Kit and Reflector 2' 2L T8AC RDI Wiring Kit and Reflector 2' 1L T5

RDIARK221LT8 AC RDI Wiring Kit and Reflector 2' 1L T8RDIARK242LT5 AC RDI Wiring Kit and Reflector 4' 2L T5RDIARK242LT8 AC RDI Wiring Kit and Reflector 4' 2L T8RDIARK241LT5 AC RDI Wiring Kit and Reflector 4' 1L T5RDIARK241LT8 AC RDI Wiring Kit and Reflector 4' 1L T8

2x2 Acrylic RDI w/Baffle - Shallow KC Frame2x4 Acrylic RDI w/Baffle - Shallow KC Frame

RDIAC22SSS-UARDIAC24SSS-UA

2x2 Acrylic RDI w/Baffle - Universal Adapter2x4 Acrylic RDI w/Baffle - Universal Adapter

For Deep Cell Parabolic Reflector Option add (DC) to part number RDIARK222LT5-DC.End view showing reflector configuration and lampholder location

Typical Deep Housing

Typical Shallow Housing

Typical Shallow Housing

Elegant Design: The RDI ACprovides the look and feel ofa deep RDI luminaire --subtle soft indirect elements,interest and depth across theceiling plane -- with a kit thatconsumes minimal spaceand material.

Efficient Solution: The con-toured panels of the unit arehigh transmission acrylicthat provide a low-brightnessglow, with the majority of thelight controlled through thecenter baffle element.

Acrylic RDIAcrylic RDI Retrofit Option for 2x2, 2x4

Acrylic RDIAcrylic RDI Retrofit Option for 2x2, 2x4

0.0100.0

0.085.6

47.388.5100.0

40.575.885.6

0.04966.3

90-1800-180

0-400-600-90

2349.54395.54966.3

11.59.860-90 570.8

%LUMINAIRE0-30 1372.6 23.7 27.6


LUMENS %BARELAMP



0 102 102 102 102 100 100 100 100 95 95 95 91 91 91 87 87 87 861 95 91 88 85 92 89 86 84 85 83 81 82 80 79 79 78 76 752 87 80 75 71 84 79 74 70 76 72 68 73 70 67 70 68 65 633 79 71 64 59 77 70 64 59 67 62 58 65 60 57 63 59 56 544 73 63 56 50 71 62 55 50 60 54 49 58 53 49 56 52 48 465 67 56 49 43 65 55 48 43 53 47 43 52 46 42 50 45 42 406 61 50 43 38 60 50 43 37 48 42 37 47 41 37 45 40 36 357 57 46 38 33 55 45 38 33 44 37 33 42 37 32 41 36 32 318 53 41 34 29 51 41 34 29 40 33 29 39 33 29 38 33 29 279 49 38 31 26 48 37 31 26 36 30 26 35 30 26 35 30 26 2410 46 35 28 24 45 34 28 24 34 28 24 33 27 23 32 27 23 22


80 70 50 30

Candlepower Curve

250

500

750

1000

1250

1500

1750

RDIAC24SSS-SDDirect / Indirect LuminaireSpecular BaffleAcrylic HT Side LensLamps: (2) F32T8Rated Lumens: 2900

SpecificationsDoor Frame: Frameless box flange can be configured to most hinge/latch locations. Features positive latching mechanism for easy relamping. Flat Flange version, to fit existing door frames, and shallowKC lift kit options also available.

Direct Optical Component: High reflectance optical engine deliversmain beam focus through the revolutionary Dur-iFlex™ HT diffusingpanel. With 93% transmission and 89% haze, the result isextraordinary control and efficiency.

Diffuser Surround: (2) Sloping high transmission acrylic diffuserpanels manage contrast and generate soft, even, higher angleluminance.

Reflector: Multi-radii high reflectance white reflector distributes lightthrough both optical elements.

Luminaire Type: Customized to fit most standard recessed lensed orparabolic housings 2X2' and 2X4'

Lamps: 1, 2 or 3-lamp T8 or T5 fluorescent wiring kits available.


Elegant Design: The RDIACHT provides the look andfeel of a deep RDI luminaire— subtle soft indirectelements, interest and depthacross the ceiling plane —with a kit that consumesminimal space and material.

Efficient Solution: Thecontoured panels of thelouver are hightransmission acrylic thatprovide a low-brightnessglow, with the majority ofthe light controlled throughthe center optical element.

RDI AC HTRDI AC HT Retrofit Option for 2x2, 2x4

For Deep Cell Parabolic Reflector Option add (DC) to part number RDIARK222LT5-DC.

Reflector Option

Kwik Change RDI Basket and HT Assembly

2x4 Acrylic RDI w/Duri-Flex HT - Shallow KC Lift Kit2x2 Acrylic RDI w/Duri-Flex HT - Shallow KC Lift KitRDIAC22HT-SK

RDIAC24HT-SK

AC RDI Wiring Kit and Reflector 2' 1L T5AC RDI Wiring Kit and Reflector 2' 2L T8RDIARK222LT8AC RDI Wiring Kit and Reflector 2' 2L T5RDIARK222LT5

RDIARK221LT5AC RDI Wiring Kit and Reflector 2' 1L T8RDIARK221LT8AC RDI Wiring Kit and Reflector 4' 2L T5RDIARK242LT5AC RDI Wiring Kit and Reflector 4' 2L T8RDIARK242LT8AC RDI Wiring Kit and Reflector 4' 1L T5RDIARK241LT5AC RDI Wiring Kit and Reflector 4' 1L T8RDIARK241LT8

2x4 Acrylic RDI w/Duri-Flex HT - Universal Adapter Kit2x2 Acrylic RDI w/Duri-Flex HT - Universal Adapter KitRDIAC22HT-UA

RDIAC24HT-UA

RDI AC HTRDI AC HT Retrofit Option for 2x2, 2x4

0.0100.0

0.082.7

46.287.7100.0

38.272.582.7

0.04798

90-1800-180

0-400-600-90

2216.24206.24798.0

12.310.260-90 591.8

%LUMINAIRE0-30 1456.2 25.1 30.3


LUMENS %BARELAMP



0 99 99 99 99 97 97 97 97 92 92 92 88 88 88 84 84 84 831 92 88 85 82 89 86 83 81 82 80 78 79 77 76 76 75 73 722 84 77 72 68 81 76 71 67 73 69 65 70 67 64 67 65 62 603 76 68 61 56 74 67 61 56 64 59 55 62 57 54 60 56 53 514 70 60 53 47 68 59 52 47 57 51 46 55 50 46 53 49 45 435 64 53 46 40 62 52 45 40 50 44 40 49 43 39 47 42 39 376 58 47 40 35 57 47 40 34 45 39 34 44 38 34 42 37 33 327 54 43 35 30 52 42 35 30 41 34 30 39 34 29 38 33 29 288 50 38 31 26 48 38 31 26 37 30 26 36 30 26 35 30 26 249 46 35 28 23 45 34 28 23 33 27 23 32 27 23 32 27 23 2110 43 32 25 21 42 31 25 21 31 25 21 30 24 20 29 24 20 19


80 70 50 30

Candlepower Curve

250

500

750

1000

1250

1500

1750

RDIACHT24-SDDirect / Indirect LuminaireDuri-Flex™ HT Acrylic HT PanelsLamps: (2) F32T8Rated Lumens: 2900

Replacement LensesReplacement Lenses Lenses for Indoor and Outdoor Applications

LexaLite® offers a full range ofreplacement lenses:

• Injection molded• Acrylic or Polycarbonate• Open and closed• Variety of light distributions• Superior materials

Full product details and other productoptions for LexaLite® products are availableon our web site: www.alplighting.com

800 Series Prismatic Reflexor®12, 16, 22” diameter

Series I43Molded Lenses

Series I33HID Refractors

Model 310 and 320Cobra Head Refractors

200 SeriesDusk-to-Dawn Refractors

Model 120 and 121Tear Drop Refractors

500 SeriesThreaded Globes

Replacement LensesReplacement Lenses Lenses for Indoor and Outdoor Applications

The Lindy® Prismatic Globes Save Money!The Lindy post top components from LexaLite offer state-of-the-art prismatic design for street and arealighting applications. Perfect for new construction or replacement projects in downtown, campus, parkor residential areas, it features unmatched performance.

• High performance optics and materials dramatically improve fixture efficiency• Better optics require much lower wattage lamps• Smart design reduces light pollution — dark sky compatible.• LexaLite globes last several times longer than blow molded acorns• 10 year warranty on acrylic versions

Take a closer look at the performance of the Lindy versus blow molded acorns:• Blow molded acorns send more light upward than downward.• The Lindy’s prisms direct the light downward, right where you need it.

23” The Lindy®

12’-20’ poles

19” Little Lindy®

8’-19’ poles

2977 Max Candela 1445 Max Candela

The LindyUplight/Downlight: 67%/15%Efficiency: 81%Dark Sky Compatible10 Year Warranty—Optically Stable

Typical Blow Molded GlobeUplight/Downlight: 46%/45%Efficiency: 42%Light PollutingNo Warranty—Yellows Quickly

Please visit www.thelindy.com for complete details.

Plastic Parabolic louvers represent themost sophisticated and opticallyprecise control media available. Theadvanced design concepts andtechnology produce controlled lightingof unparalleled visual comfort andefficiency. The shape of the verticalcell walls acts as a small reflector,directing all light into a task area.

Para-Lite 1™ Style 2

LouverPara-Lite 1™1/2"x1/2"x1/2"Para-Lite 2™1/2"x1/2"x1"Para-Lite 3™3/4"x3/4"x1/2"Para-Lite 4™3/4"x3/4"x1/2"Para-Lite 5™3/4"x3/4"x3/8"

Nominal Size

14 — 1’ x 4’22 — 2’ x 2’24 — 2’ x 4’

Fabrication Options

CUT — Cut to SizeAN — Avoida-Notch FramingNote: Cut to Size - on Cut to Size orders O.D. must be provided. Cut to Size louvers must be able to fit directly into the doorframe.Note: Avoida-Notch - O.D. must be provided. Avoida-Notch to be used when louver cannot fit into the door frame (for Style 2 only.)

Style

Style 1 (Fixture Style)2x4 — O.D.22-1/2" x 46-1/2" I.D. 19-11/16" x 43-1/2"Style 2 (Ceiling Style)1x4 — 11-3/4“ x 47-3/4”2x2 — 23-3/4“ x 23-3/4”2x4 — 23-3/4“ x 47-3/4”

Material / FinishSPS — Specular Silver, PolystyreneSPG — Specular Gold, Polystyrene, DurabolicSSS — Semi-Specular Silver, PolystyreneDSPS — Durabolic Specular Silver, Polystyrene

To Order: Select description from each columnand include “options” if applicable.

Shielding Angle 43ºV.C.P. .99Efficiency 46.2%

section

0.64" x 0.64" x 0.38"

0.64"

0.38

"

Para-Lite 1™


1-1/2" x 1-1/2" x 1"

1-1/2"

1"

section

Para-Lite 2™

3/4" x 3/4" x 1/2"

1/2"

3/4"section


Hexabolic™ 2

1" Cone in 1-5/16" Cube

Shielding Angle 45ºV.C.P. .87

Deco-Round 33™

3/4" x 3/4" x 1/2"

1/2"

3/4"section

Double Wedge Design

Para-Lite 3™


PL3HIGH EFFICIENCY


Para-Lite 5™

section

3/4“ x 3/4” x 3/8”

3/4“

3/8“

PL5HIGH EFFICIENCY


3/4" x 3/4" x 1/2"

1/2"

3/4"section

Para-Lite 4™

Replacement PlasticsReplacement Plastics Louvers for Quick, Simple Retrofit of Grid Ceiling Fixtures

Replacement PlasticsReplacement Plastics Lenses and Wraparounds for Quick, Simple Retrofit

Standard WraparoundsWe extrude our own wraparounds andhave thousands of molds to fit yourfixture.

Benefits:• DR/Virgin Acrylic polymer blend• Precision molding dies• No variation in lens thickness• Consistent size and weight• Better quality• Competitively priced• Local availability

How to Order Wraparounds1) Remove old wraparound lens or

diffuser from fixture.2) Use A.L.P. graph paper, place the

old wraparound on its end.3) Trace the end shape, being sure to

draw both the inside and outside ofthe lens or diffuser.

4) Measure overall length of lens ordiffuser - EXACTLY.

5) Send or give exact measurementsand originals to your distributor withpurchase order, quantity and typeof plastic.

For an accuratedrawing, Traceand Fax formsare available.Contact A.L.P.Customer Service.

1. Remove theDiffuser.

2. Trace theEnd of Lens.

3. Measure theLength.

Lenses and DiffusersA.L.P. Lighting offers a complete line of plastic lenses and diffusers. Avariety of material including acrylic, polycarbonate, and polystyreneare available. A.L.P. provides standard and specialty patterns andthicknesses for any application.

ALP 12/120Female Conical Prismatic

A (thickness): .100", .110", .125"

A

ALP 1 Cracked Ice

A (thickness): .08"

A

ALP 15Female Conical Prismatic

A (thickness): .200"

A

ALP 19Male Conical Prismatic

A (thickness): .156", .187"

A

ALP 52Frost Overlay

A (thickness): .045"

A

ALP SWSmooth Flat Sheet

A (thickness): .040", .060", .080", .125"

A

1/2" x 1/2" x 1/2" 1/2" x 1/2" x 3/8"

section

3/8"

1/2"

1/2"1/2"

Plastic EggcrateFinishes: Available in Translucent,White, Black and Metalized FinishesMaterials: Polystyrene and AcrylicStock Size: 23-3/4" x 47-3/4"

guide to lighting retrofit

Documents