guidelines for m. tech thesis report
TRANSCRIPT
-
8/12/2019 Guidelines for M. Tech Thesis Report
1/2
-
8/12/2019 Guidelines for M. Tech Thesis Report
2/2
7 Diagram/ Figures/Tables Decent coverage of the page as per image requirement with proper
numbering e.g. fig. 1.1, 2.1 etc. (The Caption for Diagram / Figure must be given at the BOTTOM
of the Diagram / Figure and caption for the Table must be given at the TOPof the Table.)
8 Line Spacing 1.5
9 Page margins Left1.5,
Right, Top & bottom1
10 Indenting Justified (no tab indenting for new paragraphs)
11 Gap b/w paragraphs Single line spacing
12 Printing Single side only
13 Binding Hard Leather Bound
14 Chapter subheading numbering e.g. 1.1, 2.1.1 etc.
15 No blanks on the pages except at the end of the chapter.
16 Separator sheet between chapters mentioning chapter no. & title(Colored Sheet) and should also
carry one transparency with each separator sheet.
17 Reports should be Leather Bound with Black Base and Golden Print on it. Otherwise it will be notaccepted at any cost.