gwcad_in
DESCRIPTION
engTRANSCRIPT
-
7/15/2019 GWCAD_IN
1/44
1
6.0
Drawings for Electrical
Systems
-
7/15/2019 GWCAD_IN
2/44
y
2
6.0
Its an easily used software programme
for designing and estimating
electrical systems for residential and
service industry applications
What is GWCAD for?
-
7/15/2019 GWCAD_IN
3/44
3
6.0
It enables installers and
designers to produce:- location plan drawings of the building part
- drawings of the electrical system
- a distribution layout (including accessories)- calculate lighting requirements
- a list of materials
What does GWCAD provide?
-
7/15/2019 GWCAD_IN
4/44
4
6.0
This is a programme that works independently(AutoCAD not required)
The programme has a two-dimensional CAD enginewith all the main AutoCAD commands (layer, grid,filters, block management, etc.)
It is possible to import and generate dwg and dxf
files
Drawings and images in the usual formats (bmp, jpg,wmf, etc.) can be imported and used for designingthe system
GENERAL FEATURES
-
7/15/2019 GWCAD_IN
5/44
5
6.0
MENU BARTOOL BAR
The programmes commandsare in the various drop-downmenus of the Menu bar.
Some commands (the mainones) are available at the iconsbeneath the menu bar and tothe left of the worksheet. Theseicons are all in the Tool Bar.
-
7/15/2019 GWCAD_IN
6/44
6
6.0
The various Tool Bars
available can be put on displayby going to the Tool Barcommand in the menu
File/Preferences.
TOOL BAR
-
7/15/2019 GWCAD_IN
7/447
6.0
Architecture Menu
Wall
Door
Window
Column
Join walls
Move/Stretch object
Properties
...
- Architecturecontinued ...
TOOL BAR
Furniture library
Feature
-
7/15/2019 GWCAD_IN
8/448
6.0
ElectricalMenu
...
- Electrical
Configure composition
Close composition
Device properties
Explode composition
Number boxes
Draw distribution
Add distribution accessories
Marker
Lighting calculation
Symbols list
Bill
TOOL BAR
Composition photo
Graphic composition
Electrical libraries
-
7/15/2019 GWCAD_IN
9/449
6.0
CADtools
menu
...
- CAD tools
Draw filters
TOOL BAR
Automatic filters
-
7/15/2019 GWCAD_IN
10/4410
6.0
COMMANDS BAR
Example: after having clicked on the icon Wall, you can:- draw the Starting point of the wall, or- click on Arch wall to draw an Arch wall, or- click on Properties (the window Wall properties appears)
COMMANDS BAR: after
having launched a command(clicking on the icon or usingthe menu bar), messagesappearin the Commands Barrepresenting requests foroperations or parametersthat the programme isexpecting.The various possibilities areseparated by /, and to selectone, just click on it.
-
7/15/2019 GWCAD_IN
11/4411
6.0
On starting up GWCAD, it ispossible to adjust theworksheet by choosing: format; direction of the worksheet; scale;
measuring unit.
SETTINGSCALE AND PAGE
-
7/15/2019 GWCAD_IN
12/4412
6.0
FILE COMMANDSIn the File menu there have
been included the commandsfor managing files (New, Open,
Save, etc.); settings of the drawing sheet; printing settings.
Specifically:- the Import-Export
command enables importingdrawings in the AutoCADformats dwg and dxf;
- the Preferences commandenables setting:
> the background colour> the measuring unit> variable aspects> the menu bars
-
7/15/2019 GWCAD_IN
13/4413
6.0
At Edit in the menu bar it is
possible: to duplicate generate a series move turn mirror scale()the elements drawn,in the following way:- launch a command;- select the element to be
edited;- follow the instructions given
in the commands bar.
EDIT COMMANDS
-
7/15/2019 GWCAD_IN
14/4414
6.0
In the Draw menu there are
the commands for: drawing the basic elements
(lines, circles, etc.); write text; dimension; manage drawing blocks; importing images in various
formats (bmp, jpg, etc.), forinstance, scanned layoutplans (follow the instructionsin the dialogue window thatopens).
DRAW COMMANDS
-
7/15/2019 GWCAD_IN
15/4415
6.0
In Tools there are various
commands: management of styles; filters for precision drawing.
In detail:continued...
TOOLS COMMANDS
-
7/15/2019 GWCAD_IN
16/4416
6.0
the Ortho command is fordrawing and shifting elementsvertically or horizontally;
with the Textstylecommand, the text can bedifferentiated using Windowsfonts
TOOLS COMMANDS
-
7/15/2019 GWCAD_IN
17/4417
6.0
In View there are various
commands for displaying thedrawing.
Specifically: the Zoom command is for
enlarging a detail in thedrawing, and is used by:- launching the command;- click on the upper-left
corner of the detail to beenlarged;
- click on the lower-rightcorner of the detail to beenlarged,
the command ZoomExtension is for seeing thewhole drawing on the screen
VIEW COMMANDS
-
7/15/2019 GWCAD_IN
18/4418
6.0
Symbolslibrary
DRAWING COMMANDSELECTRICAL SYSTEM
Electrical symbolsIn the library there are symbolsassociated with GEWISSproducts, and symbols for non-GEWISS products: select the icon Symbols
library; select the category of symbols(Luminaires, sockets, Domesticseries terminals, etc.)
select the electrical symbol select the series and device at
the dialogue window position and direct the device
chosen within the location plan
-
7/15/2019 GWCAD_IN
19/4419
6.0
Domestic series accessoriesIt is now possible to select: Series Fitting Plate colour
To insert the plate associatedwith one or more control/socketmodules: click on the command Insert
domestic series accessoriesand select in a box one or
more symbols of thecompatible domestic series:
click on the left of the mouseat the first top corner of thearea where the controlmodules are present;
continued...
DRAWING COMMANDSELECTRICAL SYSTEM
Calculate domestic series accessories
-
7/15/2019 GWCAD_IN
20/4420
6.0
...
move the mouse to thesecond top corner: arectangle will be createdaround the group of devices;
click to confirm and thenEnter.
A dialogue window appears forestablishing the type of fittingand the plate wanted
Once the composition has beencreated, the accessories will beadded to the list of materials
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
21/4421
6.0
Composition photoWith this button is possible toexport the images of thecompositions (Devices +Plates) and insert them intothe project.
Clicking on this button andchosing the composition youcan save the picture
Composition
photo
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
22/4422
6.0
Graphic compositionUsing this command you can
Graphic
composition
insert variousdevices in onebox:
continued...
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
23/4423
6.0
Devices commands
Range selectLaying select
Plate selectDevices layout
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
24/4424
6.0
Further commands relatingto the Domestic series
Device properties: forchanging the type of deviceinserted
Explode composition: forcancelling the operation forcalculating domestic seriesaccessories so as to return tothe original devices withoutaccessories
Number boxes: to number theboxes and get a list ofcomponents in which there isthe reference to the box theycome from
continued...
Number boxes
Explode composition
Device properties
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
25/44
25
6.0
Defining symbols scaleThe command Setcomposition makes it possibleto set a scale for all thesymbols, so that they can beinserted proportionally into animported location plan (forinstance).The symbols can be larger orsmaller, increasing anddecreasing the amount in the
Correction factor for fixedblocks.
DRAWING COMMANDSELECTRICAL SYSTEM
Configure composition
-
7/15/2019 GWCAD_IN
26/44
26
6.0
Duct choiceYou can lay out a distributionroute (tubes or channels)
Select the commandDistribution layout and click
inside the location plan at theinitial point of the distributionlayout. A dialogue boxenables:
setting the initial height
above ground and the width;
choosing the tube/sheathetc.;
adding new lines alreadydefined or create new ones as
required.
Draw distribution
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
27/44
27
6.0
Duct designOnce the choice of duct has beenmade, its route can be laid out bymoving the mouse to the pointwanted and clicking on its left
side.
While drawing, there areshown: the height from the floor the length of the section.
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
28/44
28
6.0
Duct designThe duct can be designedvirtually at various heightsabove ground by using thecommand Upward; this canbe activated while designing
the distribution by clicking onthe word Upright to the left ofthe command bar.
The points where the ductrises/descends are marked by
an arrow
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
29/44
29
6.0
Displaying ducts
Using the commandASSONOMETRICPROJECTION it is possible toget a 3D view, generating an
image after having defined thetwo coordinates and tracedround the area to be projected:
continued...
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
30/44
30
6.0
DRAWING COMMANDSELECTRICAL SYSTEM
Assonometric projection of the
ducting
-
7/15/2019 GWCAD_IN
31/44
31
6.0
Add distributionaccessories
DRAWING COMMANDSELECTRICAL SYSTEM
Distribution accessories Thiscommand is for selecting andadding accessories to thedistribution system inserted(tubes or channels).The programme only offers the
accessories compatible with thetype of channel/tube selected.
Operating the command: click on the specific
command
click on the channel (ortube)
click on the quantity and setthe amount
-
7/15/2019 GWCAD_IN
32/44
32
6.0
DRAWING COMMANDSELECTRICAL SYSTEM
Lighting calculationThis can be done in two ways.METHOD 1:devices > illuminationAfter having inserted theluminaires, select the command
Lighting calculation: select the area of interest
(with a double click at its topcorners or clicking inside it)
a dialogue window will open shown here which gives the
results of the lightingrequirement values
continued...Lightingcalculation
-
7/15/2019 GWCAD_IN
33/44
33
6.0
At this point it is possible: to change the luminaires, modify the level of
illumination
change the number ofluminairesFor each change, theprogramme updates the values(either the number ofluminaires or the level of
illumination)continued...
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
34/44
34
6.0
METHOD 2:illumination > luminairesSelect the command Lightingcalculation: select the area of interest
(with a double click at its top
corners or clicking inside it) a dialogue window will open,
shown here choose the luminaire wanted;
set the level of illuminationwanted
Calculate the programmecalculates the number ofluminaires required
continued...
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
35/44
35
6.0
At this point it is possible: to change the luminaires, modify the level of
illumination change the number of
luminairesFor each change, theprogramme updates the values(either the number ofluminaires or the level ofillumination)
DRAWING COMMANDSELECTRICAL SYSTEM
-
7/15/2019 GWCAD_IN
36/44
36
6.0
LIST OF MATERIALSQUANTITIES ESTIMATE
Bill
Regarding the electricalcomponents drawn, a list ofmaterials can be prepared
The list can be:
Whole drawing (regarding thewhole drawing)
Layers ON only (relating onlyto the active layers)
Selected (based on the areaselected)
-
7/15/2019 GWCAD_IN
37/44
37
6.0
LIST OF MATERIALSQUANTITIES ESTIMATE
Regarding the components inthe domestic series:
in the list of materials it canbe decided to take account ofthe cables and tubes that theprogramme automatically
inserts in the composition; the various components can
be grouped by box, so as tohave for each element thereference to the composition.
-
7/15/2019 GWCAD_IN
38/44
38
6.0
The list ofmaterials can be: printed saved to file in text format
(txt) saved to file to be processed
by the programme
GWPRICE
LIST OF MATERIALSQUANTITIES ESTIMATE
-
7/15/2019 GWCAD_IN
39/44
39
6.0
Marker:for eachdistribution layout,the identity datafor the duct can
be included in thedrawing
KEYS ANDIDENTIFIERS
Symbols list:it is possible to insert in thedrawing the key to the symbolsused in the electrical diagram
Marker
Symbols list
-
7/15/2019 GWCAD_IN
40/44
40
6.0
PRINT
The Print command ( from
the menu File) enablesvarious options to be set:
continued...
-
7/15/2019 GWCAD_IN
41/44
41
6.0
PRINT
A) Paper (page format):scale, staggering, printing on 1or more sheets, etc.
continued...
-
7/15/2019 GWCAD_IN
42/44
42
6.0
PRINT
B) No paper (object to beprinted): print all, printwindow (details can be printed,also very enlarged, on a sheetin whatever format wanted
Indicate command), etc.
continued...
-
7/15/2019 GWCAD_IN
43/44
43
6.0
PRINT
C) Setting (to set page andprinter): margins, conversioncolours-thickness, printersettings, etc.
continued...
6 0
-
7/15/2019 GWCAD_IN
44/44
6.0
MANUAL
Within GWCAD (Help GWCAD
command) there is a Manualavailable in which all thefunctions and commands in theprogramme are explained.This manual, in pdf format,can be viewed on screen or
printed