h al m t th h. alan mantooth professor of electrical engineering
TRANSCRIPT
H Al M t thH. Alan Mantooth
Professor of Electrical EngineeringExecutive Director
NSF Center on GRid-connected Advanced Power Electronic SystemsUniversity of ArkansasUniversity of Arkansas
ARPA-E & EERE Joint Workshop on Power Electronics in Photovoltaic SystemsPower Electronics in Photovoltaic Systems
February 8, 2011
High Temperature 50 kW Motor Drive
600 V >150 A 250+°C
High Temperature 50 kW Motor Drive
Team
Single Phase Inverter Modules
• APEI, Inc(Circuit Design, Packaging)
• University of Arkansas(Device Modeling, Packaging)
• Rohm, LtdIntegrated gate drive and power stage
Rohm, Ltd.(SiC Devices)
• Sandia National Labs(Energy Storage Systems-Imre Gyuk)
R&D100 AwardR&D100 Award
2
R&D100 AwardR&D100 AwardSelected as one of the top 100 global technology
breakthroughs for 2009 by R&D Magazine
• Demonstration Module 16 SiC DMOS (30A each) half-bridge power topology Integrated power moduleg p High temperature operation (> 250 °C) MCM gate drive boards MMC baseplate
MCM Gate Driver Board
MMC Baseplate
DBA Power Board
Design ConsiderationsMaterial Selection
• CTE• Thermal Conductivity• Weight• Machinability• Cost• Cost
Geometry• Thickness• Thermal performance
4
Thermal ResistanceThermal Resistance vs. Device Dimensions
Thermal Path Optimization• Thermal spreading• Layer thickness• High thermal cond. materials• Void-free solder bondsce
2.5Void free solder bonds
Dominating factors• Die size• Die attach
S b t t ial R
esist
anc
°C /
W)
1
1.5
2
• Substrate ceramic
Current Die Size• 2.4 mm x 4.8 mm• 0.375 – 0.40 °C/W @ 250°C (per die)
Ther
ma (°
0
0.5
1
0 W (p )
Desired Die Size• ≥ 7.5 mm x 7.5 mm• 0.10 – 0.20 °C/W @ 250°C (per die)
0
20 20
1010
0
Die Width Die Length
5
20 20(cm)g
(cm)
SidewallsThermal-Stress Design• Modeling performed in SolidWorks
Housing Design and SimulationHousing Design and Simulation
g• Maximizes thermal-stress relief features• Incorporates mechanical reinforcement structures
Stress relief and Stress relief and reinforcement features
Housing• Sidewalls frame lid
Lid Frame
• Sidewalls, frame, lid• 275 °C max ambient temperature• Thermal-stress capable design
6
Maximum deflection area
PWM Control Signal Gate Drive Output
7
Turn‐on Turn‐off Full period250 °C
SiC Power Module(Open for Thermal Imaging)
Demonstration System– 300 V DC bus input– 60 V DC motor
60 A peak current
FiltersDC MotorLoad
– 60 A peak current– 15 kHz switching frequency– 250 °C junction
temperature
Voltage Regulator for PWM Control
8
Gate DrivePower Supply
High Temperature SoldersIssues
• Few practical lead free alloys• Gold solders have limitations• Low thermal conductivity• Step soldering
Typical Gold Alloys• 81Au / 19In (487°C)• 96.85Au / 3.15Si (361°C)• 88Au / 12Ge (361°C)
80A / 20S (280°C)• 80Au / 20Sn (280°C)
Typical Lead Alloys• 95Pb / 5Sn (308°C)• 95Pb / 5In (300°C)/ ( )• 92.5Pb / 5In / 2.5Ag (300°C)
Typical Lead Free Alloys• 95.5Sn / 3.8Ag / 0.7Cu (217°C)• 3 5Ag / 96 5Sn (221°C)
9
• 3.5Ag / 96.5Sn (221°C)• 3.5Ag / 95Sn / 1.5Sb (218°C)
BenefitsTransient Liquid Phase (TLP)
• Extremely strong• High temperature stable• Excellent thermal conductivity• Processing temp < Melting temp• Lead Free
Transient Liquid Phase (TLP)
Low Temperature Liquid Phase• Tin, Indium, etc.• Eutectic solder alloys
Issues / Challenges
• Lead FreeHigh Melting Point Base Metal
• Silver, Nickel, Gold, Copper, etc.• Unalloyed for best diffusion• Needs to be relatively thick • Longer processing times
• Material compatibility• Composition variations• Pressure• Thin die metallization
• Needs to be relatively thick
Dissolution and Diffusion• Composition changes• Solidification
C tibl t i l t Thin die metallization• Highly sensitive to contamination• Compatible material systems
10
Transient Liquid Phase (TLP)Starting
compositionTarget
Composition
Transient Liquid Phase (TLP)
Low Temperature Liquid Phase• 96.5Sn / 3.5Ag Foil
High Melting Point Base Metal• 100% Silver Foil
PreformsIsostatically laminated• Isostatically laminated
• Sn plated and cut to shape
Assembly Hardware• Precision graphite fixturesg p• Alumina weights
11
Diffusion • Ni/Sn TLP bonding samples have
been fabricated Diffusion area
been fabricated• Thermal cycling still underway• Testing/Inspection/Analysis
performed:
Sn-rich area• Cross sectioning followed by
• Optical microscopy• SEM/EDX
• > 100 kg die shear testing results
TLP bond interface /minor
• > 100 kg die shear testing results w/ 1cm2 die
TLP bond interface w/minor voiding
TLP bond TLP bond interface
12
(1)Process power substrateAttach power device
(2)Add dielectric
(3)Metal contact
13
SiCMOSFET
Power Substrate
Dielectric Material
GateConnect
SiCMOSFET
SourceConnect
Lg RgLg Rg
Ls Rs
Wire Bondless Power Module12 SiC MOSFETs1200V / 150A
14
1200V / 150A
15
APEI, Inc.SiC Power Modules
CreeSiC MOSFETsSiC Diodes
9”
9”
Key Attributes• 3-Phase• Power ~ 5 kW• 115 V line to line
4”
• 115 V line to line• SiC MOSFETs and diodes• Convection air cooled• 200 °C junction temp operation• 50 kHz switching frequency
16
• 50 kHz switching frequency• Mass = 7.25 lbs.• Volume = 365 cubic inches
Air ConvectionHeat-Sink
APEI Power Modules
PowerBoard
Power
(Cree MOSFETs) InverterFilters
ConnectorsSiCGate Drivers
ControlBoard
17
Board
Actual Size Comparison
28”Heat Sink Characteristics Commercial Si Inverter APEI, Inc. SiC Inverter Comparison
Power 5 kW 5 kW SameCooling Free Air Convection Free Air Convection SamePeak Efficiency @ Pk Power 95.50% 96.75% APEI increased efficiency 1.25%Power Loss 205 watts 162 watts APEI reduces losses 27%
14”Heat Sink
Size 28.5" x 16" x 5.75" 4.5" x 9" x 9" APEI > 7x smaller volumeVolume 2,622 cubic inches 365 cubic inches APEI > 7x smaller volumeMass 58 lbs. 7.25 lbs. APEI > 8x lighterPk Temperature Capability < 125 °C > 225 °C APEI 2× temperature capability
7”
Heat Sink
APEI, Inc.SiC Inverter
CommercialSi Inverter
18
100
97
98
99
Eff
SiC JFET Solar Inverter (10 kHz)
SiC MOSFET Solar Inverter (50 kHz)
94
95
96fice Si IGBT, Fsw=10kHz
Si Solar Inverter (10 kHz)
S C OS So a e e (50 )
91
92
93ncy
SiC, Fsw=10kHz
SiC, Fsw=20kHz
SiC, SV, Fsw=8.5kHz
90
0 2 4 6 8 10 12 14Power (kW)
SiC, Fsw=10kHz, No Filter
19