h rolled coils catalogue - liberty steel galati...2 | hot rolled coils catalogue liberty galați is...
TRANSCRIPT
HOT ROLLED COILS CATALOGUE
LIBERTY GALAT, I EDITION 2019
2 | Hot rolled Coils Catalogue
Liberty Galați is the largest integrated steel plant in Romania located in the south- eastern part of the country and
is the leading manufacturer of metallurgical products. The production facility is fully integrated starting from raw materials, sintering, blast furnace, steel shop, Heavy Plates, Hot Strip Mill, Cold rolling complex, Galvanizing & Organic coating lines. The HRC produced by Galati plant is of very high quality and meets the increasing quality demands of the customer’s needs.
Applications
• Structural Steel: Industrial constructions;
• Commercial and Welding structures;
• General purpose pipe Steel;
• Atmospheric corrosion resistant structural steel;
• Pressure Vessels.
Hot Rolled Coils Production Range
Product Standard / Market segment
Structural Grades
S185, S235, S355, JOW, J2W, JOWO, QETE 380 TM, JR-J2C acc with EN10025/2; Industry, A36 - ASTM A36-2005, GLA, GLA 36
TMCP Grades S275M, S355M according with EN10025/4, S280MC, S315MC, S355MC, S420MC, S460MC, S500MC acc with EN 10149/2
Deep Drawing Grades
DD11, DD12, DD13, DD14+Ti, DD14+B according with EN10111-2008
Energy Pipes: API5L 45-2013, EN ISO 3183-2012
Normalized: Grade A/L210, Grade BN/L245N, X42N/L290N, X52N/L360N, X56N/L390N, X60N/L/L415, J55API5CT TMCP: L245M / BM, L290M / X42M, L360M / X52M, L390M / X56M, L415M / X60M
Pressure Vessels Press. vessels: P235S/P235GH - EN10207-2005, P265GH-P355GH-EN10028/2-2009, Gas bottles: P245NB-P355NB acc with EN10120-2008
Re-rollers & High Carbon
ST22_CR / ST22_HDG, DC04EK, 28Mn6, 30MnB5, C40 / C45, IF steel: DX51_CBF
Liberty Galaţi
3 | Hot rolled Coils Catalogue
Technical Delivery Conditions
• Chemical properties & Mechanical properties according to ordered standards.
• Sizes and Tolerances according to: EN10051
Dimensional capability
• Coil Weight: 12 - 17 kg/mm of width
• Inner Coil Diameter: 762 mm ( -12mm /+88 mm )
• Outside Coil Diameter: max 2100 mm
• Delivery in bundles weight: 2.5 - 15 tons
Marking
By painting on metal tags & plastic tags indicating: Made in Romania; Liberty logo; number of contract; size, quality standard; coil number and heat number.
Packaging
Each coil is tied by steel straps six through the eye and three round the circumference. Each bundle is tied by steel straps from meter to meter crosswise; and also by two longitudinal straps using metallic edge protection, option upper part covered by VCI paper.
Document of Quality
Mill's quality certificates shall be according to the material standards. Certificate type 2.2; 3.1; 3.2 according to EN 10204/2004. The steel grades offered according to EN 10025-2 shall additionally bear the CE mark.
4 | Hot rolled Coils Catalogue
Grades and standards
Application Standard Steel Grade Main advantages
Deep drawing steels EN 10111 DD11, DD12, DD13, DD14 Excellent deep drawing performance
DD11, DD12
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.40-1.49
1.50-1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 –12.00
12.01-12.50
DD13, DD14
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.40 – 1.49
1.50 – 1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 11.00
11.01- 12.00
Standard feasibility range Prior acceptance by the mill is mandatory
5 | Hot rolled Coils Catalogue
Application Standard Steel Grade Main advantages
Structural steels EN 10025-2 S185, S235, S275, S355 Good mechanical, properties, weldability and toughness
ASTMA283GRADEC / S185 / S185-CL1 /S235JR/ S235J0 / S235J2+N S235J2G4 / S235JR_CL1
Thickness Width [mm]
[mm]
870 900 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.50 –1.70
1.71 –1.79
1.80 –1.99
2.00 –2.25
2.26 –2.49
2.50 –2.69
2.70 –2.79
2.80 –2.99
3.00-12.00
12.0- 12.50
S275J0 / S275J2+N-CL1 / S275J2-CL1 / S275JR / S355H-CL1-C16S15 / S355J0 / S355J2+N / 355J2G3GALVA1 / S355J2G4 / S355JR / S355K2C+N-CL3/ S320GDRR
Thickness Width [mm]
[mm]
870 900 1000 1050 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.50 – 1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 –12.00
12.01-12.50
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
6 | Hot rolled Coils Catalogue
Application Standard Steel Grade Main advantages
HSLA steels EN 10149 S315MC; S355MC, S420MC; S460MC, S500 MC
High strength, weight savings, good abrasion resistance
S315MC
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 12.00
12.01 – 12.50
S355MC / S355J2LC / QSTE380TM
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 9.50
9.51 – 10.00
S420MC
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 4.49
4.50 – 5.99
6.00 – 8.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
7 | Hot rolled Coils Catalogue
S460MC
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1450 1500 1550
2.00 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 4.49
4.50 – 8.00
S500MC
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1450 1500 1550
2.00 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 4.49
4.50 – 6.00
6.01 – 8.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
8 | Hot rolled Coils Catalogue
Application Standard Steel Grade Main advantages
Steels for gas containers
EN 10120 P245NB, P265NB, P310NB, P355NB Deep drawable and non-ageing.Very good weldability. Excellent toughness
P245NB
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.50 – 1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 5.00
P265NB, P310NB
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.80 – 1.99
2.00 – 2.09
2.10 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 5.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
9 | Hot rolled Coils Catalogue
Application Standard Steel Grade Main advantages
Steels for pipes API 5L GradeB, X42, X46, X52, X52M, X60M
Very high tensile strength and excellent toughness at very low temperatures and in heavy gauges
A/L210 - BN/L245N
Thickness Width [mm]
[mm]
870 900 1000 1060 1100 1150 1170 1200 1250 1270 1300 1330 1350 1420 1500 1550
1.50 – 1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 12.00
12.01 – 12.50
X42/ X46/X52/S355HF
Thickness Width [mm]
[mm]
900 1000 1050 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 12.00
BMX42M
Thickness Width [mm]
[mm]
900 1000 1050 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 12.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
10 | Hot rolled Coils Catalogue
X52M
Thickness Width [mm]
[mm] 870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 4.49
4.50 – 5.99
6.00 – 8.00
X60M
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1450 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 4.49
4.50 – 5.99
6.00 – 8.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
11 | Hot rolled Coils Catalogue
Application Standard Steel Grade Main advantages
Steels for pressure vessels and boilers
EN 10028-2
P235GH; P265GH; P295GH;P355GH
Withstand high pressure at different temperatures Good weldability. Excellent toughness
P235GH
Thickness
Width [mm] [mm]
870 900 1000 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.50 – 1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 12.00
12.01 – 12.50
P295GH/P355GH
Thickness Width [mm]
[mm]
870 900 1000 1050 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
1.50 – 1.70
1.71 – 1.79
1.80 – 1.99
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 12.00
12.01 – 12.50
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
12 | Hot rolled Coils Catalogue
Application Standard Steel Grade Main advantages
Weathering steels EN 10025-5 S235JOW/S235J2W High corrosion resistance
S235JOW/ /S235J2W
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 12.00
12.01 – 12.50
S355JOW/ S355J2W / S355K2W / S355JOWP / S355J2WP
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.49
2.50 – 2.69
2.70 – 2.79
2.80 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 12.00
12.01 – 12.50
Application Main advantages
Steels for re-rolling Combination of strength, stiffness and ductility
DC04EK-HRC-SUPLPLY
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1330 1350 1400 1420 1500 1550
2.40 – 2.49
2.50 – 2.99
3.00 – 6.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
13 | Hot rolled Coils Catalogue
DC04EK-B- HRC-GAL
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1235 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.40 – 2.49
2.50 – 2.99
3.00 – 6.00
DX51CBF_IF
Thickness
Width [mm] [mm]
870 900 1000 1050 1060 1100 1150 1250 1280 1250 1270 1300 1320 1350 1400 1420 1500 1550
3.00 – 3.99
4.00 – 6.00
ST22_CR
Application Standard Steel Grade Main advantages
Steels for quenching and tempering EN 10083-2 28Mn6, 30MnB5
Excellent hardness after heat treatment
28MN6, 30MnB5
Thickness Width [mm]
[mm]
900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.99
3.00 – 3.49
3.50 – 3.99
4.00 – 8.00
8.01 – 10.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1265 1300 1320 1350 1400 1420 1500 1550
1.80 – 1.99
2.00 – 2.49
2.50 – 2.99
3.00 – 6.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
14 | Hot rolled Coils Catalogue
FE510TCLXLOWSID7.10
Thickness Width [mm]
[mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1265 1300 1320 1350 1400 1420 1500 1550
2.50 – 2.99
3.00 – 12.00
Application Main advantages
Floor plates Teardrop pattern. Excellent anti-slip
properties. Aesthetic aspect
Commercial grades: Only guarantee of chemical composition on liquid steel, without mechanical tests
· Tear height 0.60 - 1.20 mm · Tear width 8 mm -0/+4 mm · Tear length 34.5 mm -1/+3 mm · Tear angle wrt to rolling sense: 45 deg · Space between tears: 23 mm. · Thickness deviation: +/- 0,36 mm · Width deviation: +30 mm · Deviation from rib height: +/- 10%
TD_DD11, TD S235
Thickness
Width [mm] [mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
2.00 – 2.25
2.26 – 2.99
3.00 – 3.49
3.50 – 3.84
3.85 – 12.00
12.01 – 12.50
TD_S275, TD_S355
Thickness
Width [mm] [mm]
870 900 1000 1050 1060 1100 1150 1170 1200 1250 1270 1300 1320 1350 1400 1420 1500 1550
3.00 – 3.49
3.50 – 3.84
3.85 – 3.99
4.00 – 4.49
4.50 – 12.00
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
Standard feasibility range Prior acceptance by the mill is mandatory
15 | Hot rolled Coils Catalogue
Hot Rolled Sheets Hot rolled sheets of steel grades stated in the extended offer can be supplied if agreed with the production plant. The possibility of a delivery depends on the total volume of the required steel grade, the ordered quantity in the required width (of strips and sheets), the strip version and the term of delivery.
S275-S420
Thickness [mm]
Width [mm]
Length
1.8 -2.49 870 - 1250 1000 - 4000
2.5 -2.99 870 -1300 1000 - 6000
3.0 - 3.49 870 - 1524 1000 - 12000
3.5 - 5.99 870 - 1524 100 - 12000
S185 - S235
Thickness [mm]
Width [mm]
Length
1.5 - 1.79 870 -1000 1000 -3000
1.8 -2.49 870- -1250 1000 - 4000
2.5 -2.99 870- -1300 1000 - 6000
3.0 - 3.49 870 -1524 1000 -12000
3.5 - 5.99 870 -1524 1000 -12000
6.0 -9.99 870 -1524 1000 -12000
10.0 - 12.0 870 -1524 1000 -12000
Europe Liberty Galati SA: Calea Smîrdan Nb 1, 800698; Bucharest: Ethos House – 212 / 214, Gheorghe Titeica Ethos House, District 2, 020305 Tel: +40236801331 E-mail: [email protected]
North Macedonia (Balkans Agency) Liberty Skopje 16 Makedonska Brigada 18, 1000 Skopje – Macedonia T: +389 2 3247 305 T: +389 2 3247 312 E-mail: [email protected]
Turkey Korukent Sitesi E-1 Blok K:2 D:12 Levent, Istanbul 34340, Turkey T: +90 212 275 40 95 E-mail: [email protected]
Greece & Cyprus Voulis 18 , Syntagma, Greece T +30 695 777 5160 Customer Technical Support: M: +400731960092 E-mail:[email protected]
Customer Technical Support [email protected] M: +40731960092 [email protected]
M: +40751202068