hand receipt covering content of … d.c., 26 june 2013 *tm 9-2350-256-10-hr reporting errors and...

RECOVERY VEHICLE, FULL-TRACKED: MEDIUMM88A1

NSN 2350-00-122-6826 (EIC AQA)

HAND RECEIPT

COVERING CONTENT OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL)

FOR

HEADQUARTERS, DEPARTMENT OF THE ARMY26 JUNE 2013

*TM 9-2350-256-10-HR

*SUPERSEDURE NOTICE – This manual supersedes TM 9-2350-256-10-HR dated 9 January 1979, including all changes.

DISTRIBUTION STATEMENT A – Approved for public release; distribution is unlimited.

*

HAND RECEIPT

COVERING CONTENT OF COMPONENT OF END ITEMS (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL)

FOR

RECOVERY VEHICLE, FULL-TRACKED: MEDIUMM88A1

NSN 2350-00-122-6826 (EIC AQA)

HEADQUARTERS DEPARTMENT OF THE ARMY

WASHINGTON, D.C., 26 JUNE 2013

*TM 9-2350-256-10-HR

REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS

You can help improve this publication. If you find any errors, or if you would like to recommend any improvements to the procedures in this publication, please let us know. The preferred method is to submit your DA Form 2028 (Recommended Changes to Publications and Blank Forms) through the Internet on the TACOM Unique Logistics Support Applications (TULSA) Web site. The Internet address is https://tulsa.tacom.army.mil. Access to all applications requires CAC authentication, and you must complete the Access Request form the first time you use it. The DA Form 2028 is located under the TULSA Applications on the left-hand navigation bar. Fill out the form and click on SUBMIT. Using this form on the TULSA Web site will enable us to respond more quickly to your comments and to better manage the DA Form 2028 program. You may also mail, e-mail, or fax your comments or DA Form 2028 directly to the U.S. Army TACOM Life Cycle Management Command. The postal mail address is U.S. Army TACOM Life Cycle Management Command, ATTN: AMSTA-LCL-MPP / TECH PUBS, MS 727, 6501 E. 11 Mile Road, Warren, MI 48397-5000. The e-mail address is [email protected]. The fax number is DSN 786-1856 or Commercial (586) 282-1856. A reply will be furnished to you.

SUPERSEDURE NOTICE - This manual supersedes TM 9-2350-256-10-HR dated 9 January 1979, including all changes.

DISTRIBUTION STATEMENT A - Approved for public release; distribution is unlimited.

i/ii blank

TABLE OF CONTENTS

WP Sequence No.

Section I INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0001

Section II HAND RECEIPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0002

iii/blank

HAND RECEIPT FOR RECOVERY VEHICLE, FULL-TRACKED: MEDIUM M88A1

TM 9-2350-256-10-HR

0001-1

0001SECTION I. INTRODUCTION

1. SCOPE. This publication provides an overprinted DA Form 2062 (Hand Receipt), which lists the contents of Components of End Item (COEI), Basic Issue Items (BII), and Additional Authorization List (AAL) related to the Recovery Vehicle, Full-Tracked: Medium, M88A1.

2. GENERAL.

a. Section I is the overprinted DA Form 2062, that lists the line entry for System/End item and the contents of COEI, BII, and AAL extracted from TM 9-2350-256-10. The listings contain the same items and are in the same sequence as those listings in TM 9-2350-256-10.

b. The overprinted DA Form 2062 will eliminate manual preparation of the form and will assist organizations in inventorying and accounting for property as required by AR 710-2.

c. Local reproduction of the overprinted DA Form 2062 is authorized. However, organizations shall comply with local policies when reproducing DA Form 2062 by office copying equipment, field printing plant, or duplicating plant facilities.

d. Additional copies of this publication may be requisitioned from the U.S. Army Publishing Agency Distribution Operations Facility, 1655 Woodson Road, St. Louis, MO 63114-6181, in accordance with the procedures in DA PAM 25-33.

3. EXPLANATION OF BLOCKS AND COLUMNS ON (DA FORM 2062).

Refer to DA PAM Form 710-2-1. Chapter 6. Additional information required to complete DA Form 2062 is as follows:

a. FROM. Enter the organization for which the property book is maintained.

b. TO. Enter the Unit Identifier Code (UIC) and the hand receipt file number of the unit/personnel receiving the property.

c. HAND RECEIPT NUMBER. Enter a locally designated number. Use it to post the location of the property in the property book.

d. END ITEM STOCK NUMBER. Contains the National Stock Number (NSN) of the end item covered by the hand receipt.

e. END ITEM DESCRIPTION. Contains the end item short title.

f. PUBLICATION NUMBER. Contains the Technical Manual (TM) number of the TM containing the operator/crew instructions for the equipment.

g. PUBLICATION DATE. Date of the operator/crew TM.

h. QUANTITY. Quantity of the end item covered by this hand receipt.

i. STOCK NUMBER (Column a). NSN of the item described. Items without stock numbers should be requisitioned by Commercial and Government Entity Code (CAGEC) and part number, with the exception of data in accordance with AR 710-2, contained in Unit Supply Update.

HAND RECEIPT FOR RECOVERY VEHICLE, FULL-TRACKED: MEDIUM M88A1

TM 9-2350-256-10-HR

0001-2

TM 9-2350-256-10-HR

0001SECTION I. INTRODUCTION (continued)

3. EXPLANATION OF BLOCKS AND COLUMNS ON DA FORM 2062 (continued)

j. ITEM DESCRIPTION (Column b). Identifies the item contained in the COEI, BII, and AAL. It will also contain nomenclature and serial/USA number (if applicable) that will be used in identifying and controlling the item. Serial number is to be inserted and initialed on all copies by hand receipt holder. In addition, it will contain the 5-digit CAGEC, part number (P/N), and “Usable on” code, if applicable.

k. Column c. The Accounting Requirements Code (ARC) is inserted here.

NOTE

The Accounting Requirement Code (ARC) refers to property accountability, not disposal authority. Disposition action and authority for an unserviceable item is governed by the recoverability code (5th position of the Source, Maintenance, and Recoverability (SMR) code) assigned to the item in the Repair Parts and Special Tools List (RPSTL).

(1) Refer to DA PAM 7l0-2-1, Chapter 6. Additional information required to complete DA Form 2062 is listed below.

(2) Hand receipts shall identify the accounting requirements status of all line item entries via column c. One of the following codes will apply:

One of the following will apply:

N Nonexpendable Items not consumed in use, retaining their identity during use, and requiring that accountability be maintained throughout the life of the items.

D Durable Nonconsumable components of sets, kits, outfits, and assemblies; all tools in federal supply codes (FSC), 5120, 5130, 5140, 5180, 5210, 5220, and 5280; and any other nonconsumables with a price in excess of $50.00 not already “N.”

X Expendable Items, regardless of type classification or price, which are consumed in use. Includes all class 9 repair parts. Items not consumed in use which cost $50.00 or less and not already “N” or “D.”

0001-3

TM 9-2350-256-10-HR



l. SEC (Column d). The physical Security/Pilferage code is entered here. This is a one-position code that indicates the security classification or pilferage control for storage or transportation of assets. Order of precedence for assignment of codes is classified, sensitive, pilferable, and unclassified, as applicable.

SECCODE PHYSICAL SECURITY CODE

A CONFIDENTIAL - Former Restricted DataB CONFIDENTIAL - Restricted DataC CONFIDENTIALD CONFIDENTIAL - CryptologicE SECRET - CryptologicF TOP SECRET - CryptologicG SECRET - Former Restricted DataH SECRET - Restricted DataK TOP SECRET - Former Restricted DataL TOP SECRET - Restricted DataO Naval Nuclear Propulsion InformationS SECRETT TOP SECRETU UNCLASSIFIED

SENSITIVE ITEMSP Ammunition and ExplosivesQ An item which is a drug or other substance determined by the Director, Drug Enforcement Administration (DEA), Department of Justice, to be designated schedule symbol III, IV, or V, as defined in the Controlled Substance Act of 1970, and other items requiring secure storage.7 Prior to disposal, sensitive information - all nameplates, label plates, tags, stickers, documents, or markings - that relates items to weapon system end item application must be removed and destroyed.

PILFERAGE ITEMS CODEI Aircraft engine equipment and parts.M Hand tools and shop equipment.N Firearms.V Individual clothing and equipment.W Office machines.X Photographic equipment and supplies.Y Communications/electronic equipment and parts.Z Vehicular equipment and parts. Pilferable item, due to its size, shape and utility, which does not fall under one of the above categories. Pilferage controls may be designated by the coding activity to items coded U (unclassified) by recoding the items to J.

0001-4

TM 9-2350-256-10-HR



m. UI (Column e). Unit of Issue.

n. QTY AUTH (Column f). To be on hand, or part of the end item.

o. QUANTITY (Column g). Actual quantity on hand. To be filled in by the receiving unit/personnel in accordance with DA PAM 710-2-1 and DA PAM 710-2-2, contained in Unit Supply Update.

p. Page Number/Number of Pages. Contains page number and total number of pages for the COEI, BII, and AAL portions of the hand receipt. Hand receipt holder will initial each page number (only when two or more forms are involved). When hand receipt holders change, the old initials will be lined out and the new hand receipt holder will initial each page.

4. AUTHORIZED DOCUMENTS.

a. Components of End Item (COEI) are authorized by the applicable Repair Parts and Special Tools List (RPSTL).

b. Basic Issue Items (BII) are authorized by the applicable operator’s manual.

C. Additional Authorization List (AAL) items are authorized by the appropriate MTOE, TDA, CTA, or JTA authorization documents.

END OF WORK PACKAGE

1. 6830-00-292-0137 ACETYLENE: if equipped EA 1

2. 2540-00-670-2459 BAG ASSEMBLY, PAMPHLET EA 1

3. 7510-00-889-3494 BINDER, LOOSE-LEAF EA 1

4. 3940-00-105-9933 BLOCK, TACKLE: 10 tons (9.07 metric tons) EA 1

5. 3940-00-792-9881 BLOCK, TACKLE: 25 tons (22.68 metric tons) EA 1

6. 3940-00-792-9882 BLOCK, TACKLE:90 tons (81.65 metric tons) EA 2

7. 5306-00-799-7722 BOLT, MACHINE: spare sprocket bolt EA 22

8. 5306-00-538-0854 BOLT, MACHINE: spare support roller bolt,hexagon countersunk EA 12

9. 4010-00-133-6517 CHAIN ASSEMBLY, SINGLE LEG: combat tow chain 0.875 in. (22.23 mm) EA 1

Component of End Item (COEI)

HAND RECEIPT NUMBER

TO:FROM:HAND RECEIPT/ANNEX NUMBERFor use of this form, see DA PAM 710-2-1. The proponent agency is DCS, G-4.

FOR ANNEX/CR

ONLY

END ITEM STOCK NUMBER2350-00-122-6826

END ITEM DESCRIPTIONRECOVERY VEHICLE, FULL-TRACKED:

MEDIUM M88A1

PUBLICATION NUMBERTM 9-2350-256-10

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

* WHEN USED AS A: HAND RECEIPT, enter Hand Receipt Annex Number HAND RECEIPT FOR QUARTERS FURNITURE, enter Condition Codes HAND RECEIPT ANNEX/COMPONENTS RECEIPT, enter Accounting Requirements Code (ARC).

PUBLICATION DATE26 JUNE 2013

DA FORM 2062 JAN 82 EDITION OF JAN 58 IS OBSOLETE APD V2.11

0002TM

9-2350-256-10-HR

Section II

Current as of 26 JUNE 2013

PAGE 1 OF 20 PAGES

QUANTITY1

0002-1

COEI (continued)

10. 4010-00-473-6166CHAIN ASSEMBLY, SINGLE LEG:(16.63 ft (5,066.82 mm) x 0.656 in. (16.66 mm)) nominal stock

EA 4

11. 2540-00-863-3153 COUPLER, DRAWBAR, RING:M113 tow clevis EA 2

12. 4210-00-270-4512EXTINGUISHER, FIRE:5 lb (2.27 kg) carbon dioxide. Vehicle may be equipped with Item # 12 or 13

EA 2

13. 4210-01-500-9658EXTINGUISHER, FIRE:5 lb (2.27 kg) carbon dioxide. Vehicle may be equipped with Item # 12 or 13

EA 2

14. 5120-01-016-2149FIXTURE, TRACK CONNECTING,FULL TRACKED VEHICLE:connect, 3/4-in. drive

EA 2

15. 7510-01-065-0166 FOLDER, EQUIPMENT RECORD: logbook EA 1

16. 2540-00-706-8219 HOOK, TOW EA 2

17. 4720-00-856-0484HOSE ASSEMBLY, NONMETALLIC:attaches to impact wrench 0.5 in. (12.7 mm) x 5 ft (1.52 m)

EA 1

18. 4720-00-856-0483HOSE ASSEMBLY, NONMETALLIC: attaches to impact wrench0.375 in. (6.35 mm) x 5 ft (1.52 m)

EA 1

19. 4720-01-475-6916 HOSE ASSEMBLY, NONMETALLIC:0.5 in. (12.7 mm) x 25 ft (7.62 m) EA 2

20. 4720-00-792-9884 HOSE ASSEMBLY, NONMETALLIC:0.375 in. (9.53 mm) x 25 ft (7.62 m) EA 2

Reverse of DA FORM 2062

0002TM

9-2350-256-10-HR

0002-2

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 2 OF 20 PAGES

COEI (continued)

21. 5830-00-543-0737INTERCOMMUNICATION SET, VIC 1. Vehicle may be equipped with Item # 21 or 22

EA 1

22. 5830-01-452-3568INTERCOMMUNICATION SET, VIC 3.Vehicle may be equipped withItem # 21 or 22

EA 1

23. 1055-01-015-0874LAUNCHER, GRENADE,ARMAMENT SUBSYSTEM.Composed of Items 24 through 29

EA 1

24. 2541-01-208-7115 BOX, AMMUNITION STOWAGE EA 2

25. 1040-01-042-3861 COVER, PROTECTIVE, DISCHARGER, LH EA 1

26. 1040-01-043-7896 COVER, PROTECTIVE, DISCHARGER, RH EA 1

27. 1040-99-965-8028 DISCHARGER, GRENADE SMOKE, COUNTERMEASURE, LH EA 1

28. 1040-99-965-8029 DISCHARGER, GRENADE SMOKE, COUNTERMEASURE, RH EA 1

29. 5930-01-167-4606 PUSH BUTTON UNIT EA 1

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-3


PAGE 3 OF 20 PAGES

QUANTITY1

COEI (continued)

30. MANUAL, TECHNICAL, OPERATOR’S: TM 9-2350-256-10 EA 1

31.

MANUAL, TECHNICAL, VIEWERS, DRIVERS NIGHT VISION AN/VVS-2(V)1A: TM 11-5855-249-23&P or Driver’s Vision Enhancer (DVE) TM 11-5855-311-12&P-1

EA 1

32. 1005-00-704-6650 MOUNT, MACHINE GUN: .50 caliber EA 1

33. 5855-01-096-0871NIGHT VISION DEVICE AN/VVS-2.Vehicle may be equipped withItem # 33 or 34

EA 1

34. 5855-01-499-3576DRIVERS VISION ENHANCER (DVE).Vehicle may be equipped withItem # 33 or 34

EA 1

35. 4930-00-861-9982 NOZZLE, FUEL AND OIL SERVICING EA 1

36. 5310-01-064-3910NUT, SELF-LOCKING,CONE SEAT, HEXAGON:spare roadwheel nut

EA 20

37. 5310-00-225-6408 NUT, SELF-LOCKING, HEXAGON:spare sprocket bolt nut EA 22

38. 6830-01-049-5263 OXYGEN EA 1

39. 5340-00-682-1505 PADLOCK SET:5 lock set/keyed alike SE 2

40. 2530-00-608-2271 PARTS KIT, TRACK: end connector kit complete EA 6


0002TM

9-2350-256-10-HR

0002-4

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 4 OF 20 PAGES

COEI (continued)

41. 2530-00-860-7348 PARTS, KIT, TRACK CEN: center guide kit complete EA 4

42. 5315-00-706-9195 PIN, GROOVED, HEADLESS: for tow hooks EA 4

43. 2530-01-004-4209 PLATE SEAL, TRACK ROLLER:lockout blocks EA 2

44. 4030-00-377-1389SHACKLE: 2 in. (50.8 mm) diameterwith pin 7357982

EA 4

45. 4030-00-318-0326 SHACKLE: 0.875 in. (22.23 mm) diameter with pin 7357982 EA 6

46. 4030-00-373-1256 SHACKLE: 1.25 in. (31.75 mm) diameter EA 4

47. 4030-00-377-1388 SHACKLE: 1.75 in. (44.45 mm) diameter EA 2

48. 3020-00-293-5136 SPROCKET WHEEL EA 2

49. 4910-01-267-2912 TOW BAR, MOTOR VEHICLE.Composed of Items 50 through 54 EA 2

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-5


PAGE 5 OF 20 PAGES

QUANTITY1

COEI (continued)

50. 5340-01-267-2908 CLEVIS, ROD END EA 2

51. 5315-00-539-9174 PIN, GROOVED, HEADED EA 7

52. 5315-00-350-4326 PIN, LOCK EA 7

53. 2540-01-181-6429 TOW BAR, MOTOR VEHICLE EA 1

54. 2540-01-031-0132 TOW BAR, MOTOR VEHICLE EA 1

55. 2530-00-692-9316 TRACK SHOE, VEHICULAR EA 6

56. 4710-00-792-9886 TUBE ASSEMBLY, METAL: fuel nozzle extension 34 in. (863.6 mm) long EA 1

57. 5120-00-243-9072 VISE, BENCH AND PIPE EA 1

58. 2530-00-293-5137 WHEEL, SOLID RUBBER TIRE: support roller EA 2

59. 2530-00-701-3976 WHEEL, SOLID RUBBER TIRE: roadwheel EA 2

60. 4010-00-202-2427WIRE ROPE ASSEMBLY, SINGLE LEG: tow cables 15 ft long (4.57 m). Vehicle may be equipped with Item # 60 or 61

EA 2


0002TM

9-2350-256-10-HR

0002-6

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 6 OF 20 PAGES

61. 4010-01-041-9752WIRE ROPE ASSEMBLY, SINGLE LEG: tow cables 15 ft long (4.57 m). Vehicle may be equipped with Item # 60 or 61

EA 2

62. 5130-01-309-6589 WRENCH, IMPACT, ELECTRIC: 1/2-in. square drive EA 1

63. 5130-01-471-1328 WRENCH, IMPACT, HYDRAULIC: 3/4-in. square drive EA 1

COEI (continued)

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II


PAGE 7 OF 20 PAGES

QUANTITY1

0002-�/blank

Basic Issue Items (BII)

1. 4930-00-288-1511 ADAPTER, GREASE GUN COUPLING: flexible 12 in. (304.8 mm) EA 1

2. 4930-00-204-2550 ADAPTER, GREASE GUN COUPLING: thin stem gun, lubr, sleeve type, rigid EA 1

3. 5120-01-378-5897 ADAPTER, SOCKET WRENCH: 1/2-in. drive to 3/4-in. drive EA 1

4. 5110-00-293-2336 AX, SINGLE BIT: 4 lb (1.8 kg) EA 1

5. 5140-00-473-6256 BAG, TOOL: satchel EA 1

6. 4240-01-470-3940 BIB APRON, WELDING EA 1

7. 2590-00-148-7961 CABLE KIT, SPECIAL P: slave cable EA 1

8. 7240-01-337-5268CAN, MILITARY: fuel can 5 Gal (20 L), sand. Vehicle may be equipped withItem # 8 or 9

EA 2

9. 7240-01-337-5269CAN, MILITARY: fuel can 5 Gal (20 L), field drab. Vehicle may be equipped withItem # 8 or 9

EA 2

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-9


PAGE 9 OF 20 PAGES

QUANTITY1

BII (continued)

10. 7240-00-089-3827CAN, MILITARY: water can 5 Gal (20 L), lusterless sand. Vehicle may be equipped with Item # 10 or 11

EA 2

11. 7240-01-365-5317CAN, MILITARY: water can 5 Gal (20 L), green. Vehicle may be equipped with Item # 10 or 11

EA 2

12. 5120-00-224-1390 CROWBAR: tanker’s bar 5 ft (1.52 m) long, 1.25 in. (37.75 mm) wide EA 2

13. 7690-01-056-2033 DIAGRAM, STRAP LOCATOR EA 1

14. 5120-00-505-5918 DRIFTPIN: brass; 0.75 in. (19.05 mm) diameter point EA 2

15. 6220-01-606-8157 EXTERIOR LIGHTING, KIT, LED. Composed of Items 16 through 22 EA 1

16. 6220-01-606-8156 60W FLOOD LIGHT, LED EA 3

17. 6150-01-607-0303 CABLE ASSEMBLY, 28 VDC AUXILIARY PLUG EA 1

18. 6150-01-607-0301 CABLE ASSEMBLY, LED LIGHT EA 2

19. 6150-01-607-0306 CABLE ASSEMBLY,LED LIGHT, NATO POWER EA 1

20. 6150-01-607-0307 CABLE ASSEMBLY, LED LIGHT, SWITCH EA 1


0002TM

9-2350-256-10-HR

0002-10

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 10 OF 20 PAGES

BII (continued)

21. 6150-01-607-0302 CABLE ASSEMBLY, LED LIGHTING “Y” EA 2

22. 6210-01-606-8158 CASE, EXTERIOR LIGHTS, LED EA 1

23. 6545-00-922-1200 FIRST AID KIT, GENERAL PURPOSE: motor vehicle, 12 unit, size 1 KT 1

24. 5120-00-965-0603 FLINT TIP, FRICTION IGNITOR: if equipped BX 1

25. 7240-01-517-5539 FUNNEL OFFSET: 6 qt (5.7L) EA 1

26. 7240-00-559-7364FUNNEL: ‘S’ zinc coated, 1 qt (0.95 L) (8 in. (203.2 mm) long flexible tube spout with removable strainer)

BX 1

27. 8415-00-268-7859 GLOVES, WELDER’S: if equipped EA 1

28. 4240-00-203-3804 GOGGLES, INDUSTRIAL: if equipped EA 1

29. 5120-00-061-8546 HAMMER, HAND: 2 lb (0.91 kg) ball-peen EA 1

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-11


PAGE 11 OF 20 PAGES

QUANTITY1

30. 5120-00-203-4656 HAMMER, HAND: 2.5 lb (1.13 kg) blacksmith’s, double-faced, 15 in. (381 mm) handle length

EA 1

31. 5120-00-900-6097 HAMMER, HAND: 10 lb (4.5 kg) EA 1

32. 5120-00-288-6574 HANDLE, MATTOCK-PICK: 36 in. long, grade AA EA 1

33. 5120-00-221-7959 HANDLE, SOCKET WRENCH: 3/4-in. square drive EA 1

34. 5120-00-249-1076 HANDLE, SOCKET, WRENCH:3/4-in. square drive, ratchet EA 1

35. 4720-00-273-9886 HOSE ASSEMBLY, NONMETALLIC: red, if equipped EA 1

36. 4720-00-293-7997 HOSE ASSEMBLY, NONMETALLIC: green, if equipped EA 1

37. 5120-00-965-0326 IGNITOR, FRICTION: if equipped EA 1

38. 5120-00-224-7330JACK, HYDRAULIC, HAND:12 tons (10.89 metric tons)with operating handle

EA 1

39. 5120-00-935-4641 KEY SET, SOCKET HEAD SCREW: L type, class 1 short series SE 1

40. 6675-00-641-3163 LEVEL, SURVEYING EA 1

BII (continued)


0002TM

9-2350-256-10-HR

0002-12

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 12 OF 20 PAGES

BII (continued)

41. 4930-00-766-3545LUBRICATING GUN, HAND: 21 oz (653.17 g) capacity. Vehicle may be equipped with Item # 41 or 42

EA 1

42. 4930-01-133-7143LUBRICATING GUN, HAND:21 oz (653.17 g) capacity. Vehicle may be equipped with Item # 41 or 42

EA 1

43. 5120-00-246-2311 LUBRICATION FITTING TOOL EA 1

44. 5120-00-243-2395 MATTOCK: pick w/o handle EA 1

45. 3940-01-477-7074 NET, DRAFT COVER EA 1

46. 5120-01-052-5642 PULLER AND PUMP, END: end connector puller EA 1

47. 9905-00-148-9546REFLECTOR SET, HIGHWAY WARNING,TRIANGULAR: portable, triangular-shaped(3 warning triangles)

SE 1

48. 4820-01-079-8235 REGULATOR, COMPRESSED GAS:oxygen, if equipped EA 1

49. 4020-01-204-7039 ROPE, FIBROUS: 100 ft (30.48 m) CL 1

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-13


PAGE 13 OF 20 PAGES

QUANTITY1

50. 2540-00-087-0199 SEAT, VEHICULAR: leather cover EA 2

51. 5120-00-293-3336SHOVEL, HAND:general purpose, D-handled,size 2, round point

EA 1

52. 3940-00-675-5002 SLING, ENDLESS: 4 ft (1.22 m) EA 1

53. 5130-01-084-6025SOCKET, SOCKET WRENCH: power drive, 6 point, thin wall, 1-5/16 in. opening (used on track center guide nut)

EA 1

54. 7240-00-177-6154 SPOUT, CAN, FLEXIBLE EA 2

55. 2540-01-330-8062 TARPAULIN: 17 ft x 12 ft (5.18 m x 3.66 m) EA 1

56. 3433-00-294-6743 TORCH SET, WELDER’S: if equipped EA 1

57. 5130-01-299-0175 UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT: 3/4-in. square drive EA 1

58. 4820-00-551-1094 VALVE, REGULATING,PRESSURE: acetylene, if equipped EA 1

59. 4820-00-828-7192 VALVE, CHECK: acetylene, if equipped EA 1

60. 4820-00-828-7190 VALVE, CHECK: oxygen EA 1

BII (continued)


0002TM

9-2350-256-10-HR

0002-14

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 14 OF 20 PAGES

BII (continued)

61. 3439-01-553-0279WELDING ACCESSORY KIT, ELECTRIC: exothermic cutter. Composed of Items 62 through 85

EA 1

62. 3110-01-037-0843 ADAPTER, YOKE EA 1

63. 3431-01-519-7482 COLLET BODY, WELDING TORCH KT 4

64. 3431-01-519-7483 COLLET BODY, WELDING TORCH EA 1

65. 3431-01-554-5450 COLLET BODY, WELDING TORCH EA 1

66. 3431-01-554-8689 COLLET BODY, WELDING TORCH(SPARE) EA 1

67. 3433-01-536-5515 COLLET, WELDING TORCH KT 1

68. 5935-01-555-0325 DUMMY CONNECTOR ASSEMBLY, ELECTRICAL EA 1

69. 3439-01-411-3866 ELECTRODE, CUTTING, SOLID BX 1

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-15


PAGE 15 OF 20 PAGES

QUANTITY1

BII (continued)

70. 8415-01-463-3285 GLOVE, WELDER’S PR 1

71. 4240-01-554-9687 GOGGLES, INDUSTRIAL EA 1

72. 3439-01-519-7478 HOLDER, ELECTRODE, WELDING EA 1

73. 4720-01-554-8386 HOSE ASSEMBLY SET, METALLIC EA 1

74. 7610-01-554-9685 MANUAL, TECHNICAL EA 1

75. 6130-01-519-7494 MODIFICATION KIT, ELECTRIC POWER AND DISTRIBUTION EQUIPMENT EA 1

76. 4820-01-079-8235 REGULATOR, COMPRESSED GAS EA 1

77. 4820-01-519-7500 REPAIR KIT, VALVE (SPARE) EA 1

78. 3433-01-519-7492 ROD, CUTTING EA 1

79. 3433-01-519-7490 ROD, CUTTING EA 1

80. 3433-01-519-7495 ROD, EXTENDER EA 1


0002TM

9-2350-256-10-HR

0002-16

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 16 OF 20 PAGES

81. 3433-01-463-3286 SHIELD, CUTTING TORCH EA 1

82. 8145-01-554-9719 SHIPPING AND STORAGE CONTAINER,MISCELLANEOUS EQUIPMENT EA 1

83. 5340-01-554-5616 STRIKE, CATCH EA 1

84. 3433-01-554-6627 TORCH, CUTTING EA 1

85. 5120-01-579-2042 WRENCH, ADJUSTABLE: 10-Way Wrench EA 1

86. 5120-00-277-6470WRENCH, ADJUSTABLE:track link adjustable wrench2-3/4 in. to 4-3/4 in. opening

EA 1

87. 5120-00-240-1414 WRENCH, ADJUSTABLE:18 in. (457.2 mm) long (crescent) EA 1

88. 5120-00-264-3796 WRENCH, ADJUSTABLE:12 in. (304.8 mm) long EA 1

89. 5120-00-264-3793 WRENCH, ADJUSTABLE:15 in. (381 mm) long EA 1

BII (continued)

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II


PAGE 17 OF 20 PAGES

QUANTITY1

0002-1�

90. 5120-00-494-1911 WRENCH, PLIER: vise grips, curved jaw with cutter 1.75 in. (44.45 mm) EA 1

91. 5120-00-277-4244 WRENCH, PLIER: vise grip, straight jaw1.625 in. (41.28 mm) opening EA 1

92. 5130-00-357-5135WRENCH SET, SOCKET: 3/4-in. square drive, 6 point, heavy duty, with case and extension bars, 9/16 in. to 1-1/2 in. opening, 16 pieces

SE 1


0002TM

9-2350-256-10-HR

0002-18

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 18 OF 20 PAGES

ADDITIONAL AUTHORIZATION LIST (AAL)

1. 8465-00-261-4998 BAG, AMMUNITION EA 2

2. 8140-00-960-1699 CHEST, AMMUNITION EA 13

3. 4230-01-133-4124 DECONTAMINATING APPARATUS EA 1

4. 6220-01-606-8157 EXTERIOR LIGHTING KIT, LED EA 1

5. 8415-00-268-7870 GLOVES, MEN’S AND WOMEN’S PR 3

6. 5120-00-473-6320 HANDLE, EXTENSION, WRENCH EA 1

7. 5965-01-453-2684 HEADSET – MICROPHONE: large CVC EA A/R

8. 5965-01-453-2687 HEADSET – MICROPHONE: medium CVC EA A/R

9. 8415-01-484-8528 HELMET, COMBAT VEHICLECREWMAN’S: small EA A/R

HAND RECEIPT NUMBER


FOR ANNEX/CR

ONLY



MEDIUM M88A1


STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY




0002TM

9-2350-256-10-HR

Section II

0002-19


PAGE 19 OF 20 PAGES

QUANTITY1

AAL (continued)

10. 4930-00-766-3545 LUBRICATING GUN, HAND EA 1

11. 4930-01-133-7143 LUBRICATING GUN, HAND EA 1

12. 8345-00-174-6865 PANEL MARKER EA 2

13. 2540-00-653-7589 TARPAULIN: olive drab EA 1

14. 2540-01-330-8062 TARPAULIN: tan EA 1

15. 3433-01-247-2334 TORCH OUTFIT, WELDING (portable) OT 1


0002TM

9-2350-256-10-HR

0002-20

APD V2.11

STOCK NUMBER

a.

ITEM DESCRIPTION

b.* c.

SEC d.

UI e.

QTY AUTH

f. A B C D E F

g. QUANTITY

PAGE 20 OF 20 PAGES

RECOMMENDED CHANGES TO PUBLICATIONS AND BLANK FORMS

For use of this form, see AR 25-30; the proponent agency is OAASA.

Use Part II (reverse) for Repair Parts and Special Tool Lists (RPSTL) and Supply Catalogs/Supply Manuals (SC/SM).

DATE

Date you filled out this form.

TO (Forward to proponent of publication or form) (Include ZIP Code)

U.S. Army TACOM Life Cycle Management Command ATTN: AMSTA-LCL-MPP/TECH PUBS

6501 E. 11 Mile Road, Warren, MI 48397-5000

FROM (Activity and location) (Include ZIP Code)

Your mailing address

PART I – ALL PUBLICATIONS (EXCEPT RPSTL AND SC/SM) AND BLANK FORMS

PUBLICATION/FORM NUMBER

TM Number DATE

Date of the TM TITLE

Title of the TM ITEM PAGE PARA-

GRAPH LINE FIGURE

NO. TABLE RECOMMENDED CHANGES AND REASON

(Exact wording of recommended change must be given)

0007-3 0018-2

Figure 2, Item 9 should show a lockwasher. Currently shows a flat washer. Cleaning and inspection, Step 6, reference to governor support pin (14) is wrong reference. Reference should be change to (12).

TYPED NAME, GRADE OR TITLE

Your Name

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

Your Phone Number

SIGNATURE

Your Signature

DA FORM 2028, FEB 74 REPLACES DA FORM 2028, 1 DEC 68, WHICH WILL BE USED. APD V4.00

SSAAMMPPLLEE

TO (Forward direct to addressee listed in publication)




Your Address

DATE

Date you filled out this form

PART II – REPAIR PARTS AND SPECIAL TOOL LISTS AND SUPPLY CATALOGS/SUPPLY MANUALS

PUBLICATION NUMBER

TM Number DATE

Date of the TM

TITLE

Title of the TM

PAGE NO.

COLM NO.

LINE NO.

NATIONAL STOCK NUMBER

REFERENCE NO.

FIGURE NO.

ITEM NO.

TOTAL NO. OF MAJOR

ITEMS SUPPORTED

RECOMMENDED ACTION

PART III – REMARKS (Any general remarks, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)

TYPED NAME, GRADE OR TITLE

Your Name

TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

Your Phone Number

SIGNATURE

Your Signature

APD V4.00

SSAAMMPPLLEE


For use of this form, see AR 25-30; the proponent agency is OAASA


DATE







TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1

PAGE PARA-GRAPH

LINE FIGURE NO.

TABLE RECOMMENDED CHANGES AND REASON

TYPED NAME, GRADE OR TITLE TELEPHONE EXCHANGE/AUTOVON, PLUS EXTENSION

SIGNATURE





FROM (Activity and location) (Include ZIP Code) DATE



TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1

PAGE NO.

COLM NO.

LINE NO.


REFERENCE NO.

FIGURE NO.

ITEM NO.

TOTAL NO. OF MAJOR

ITEMS SUPPORTED

RECOMMENDED ACTION

PART III – REMARKS (Any general remarks, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)


SIGNATURE

APD V4.00




DATE







TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1

ITEM PAGE PARA-GRAPH

LINE FIGURE NO.



SIGNATURE








TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1

PAGE NO.

COLM NO.

LINE NO.


REFERENCE NO.

FIGURE NO.

ITEM NO.

TOTAL NO. OF MAJOR

ITEMS SUPPORTED

RECOMMENDED ACTION

PART III – REMARKS (Any general remark, or recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)


SIGNATURE

APD V4.00




DATE







TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1


LINE FIGURE NO.



SIGNATURE








TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1

PAGE NO.

COLM NO.

LINE NO.


REFERENCE NO.

FIGURE NO.

ITEM NO.

TOTAL NO. OF MAJOR

ITEMS SUPPORTED

RECOMMENDED ACTION

PART III – REMARKS (Any general remarks, recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)


SIGNATURE

APD V4.00




DATE







TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1


LINE FIGURE NO.



SIGNATURE








TM 9-2350-256-10-HR

DATE

26 JUNE 2013

TITLE

HAND RECEIPT M88A1

PAGE NO.

COLM NO.

LINE NO.


REFERENCE NO.

FIGURE NO.

ITEM NO.

TOTAL NO. OF MAJOR

ITEMS SUPPORTED

RECOMMENDED ACTION

PART III – REMARKS (Any general remarks, recommendations, or suggestions for improvement of publications and blank forms. Additional blank sheets may be used if more space is needed.)


SIGNATURE

APD V4.00

Distribution: To be distributed in accordance with the initial distribution number (IDN) 371449, requirements for TM 9-2350-256-10-HR.

1313306

By Order of the Secretary of the Army:

RAYMOND T. ODIERNO General, United States Army

Chief of Staff Official:

GERALD B. O'KEEFE Acting Administrative Assistant

to the Secretary of the Army

PIN: 03�896-000

hand receipt covering content of … d.c., 26 june 2013 *tm 9-2350-256-10-hr reporting errors and...

Documents