hands-on-tools to facilitate learning - nova bus · simulator description air brake trainer...
TRANSCRIPT
TRAINING SIMULATORS
HANDS-ON-TOOLSto facilitate learning
Multiplex Training Simulator Model 1
Full System Multiplex Training Simulator Model 2
Thermo King system Training Simulator
Full Pneumatic Braking System Simulator
Full Pneumatic System Simulator
Diesel Engine Bench and Transmission Simulator
Door System Training Simulator
Wheelchair Ramp Training Simulator
Destination Sign Training Simulator
Fire Suppression Training Simulator
Articulation Training Simulator
Hybrid Training Simulator Model 1
Public Announcement Simulator
Front and Rear Axle
Front and Rear Axle Caliper
ITS Simulator
Virtual Pneumatic Simulator
Available Simulators
SIMULATOR DESCRIPTION◊ Self-contained fully-functional multiplexing system.
◊ Pre-loaded with troubleshooting scenarios to actively involve
participants in the electrical multiplexing problem-solving process.
◊ A sampling of bus operations, inputs, and outputs are designed into this
simulator.
NV-1000-03
* A laptop can be stored in the top layer of foam, which can be plugged into any standard electrical outlet.
Voltage Input: 120 VAC, 15 AC
Dimensions: L 32 x W 21 x D 13 inches
L 80 x W 52.5 x D 32.5 cm
Weight: 40 lb (18.2 kg)
SPECIFICATIONS
MULTIPLEX TRAINING SIMULATOR MODEL 1
SIMULATOR DESCRIPTION◊ Displays every component of the network communication system.
◊ Enables users to practice electrical, multiplexing and J1939 CAN
diagnostic procedures.
◊ Mounted in compliance with the manufacturer’s specifications and
standards, and wired according to OEM electrical diagrams.
◊ Allows the user to see and access all of the bus’ multiplexing compo-
nents.
NV-1000-02
* This simulator can be updated with new bus programs.
Voltage Input: 120 VAC, 15 AC
Dimensions: L 98 x W 26 x D 78 inches
L 245 x W 65 x D 195 cm
Weight: 380 lb (172.7 kg)
SPECIFICATIONS
MULTIPLEX TRAINING SIMULATOR MODEL 2
SIMULATOR DESCRIPTION◊ 460V Stand-Alone Carrier® HVAC Training Bench.
◊ Allows clear visualization of all component operation of the electrically
operated HVAC system.
◊ It provides student diagnostic exercises using manually induced
faults.
NV-1000-01B
Voltage Input: 460 VAC, 20 AC
Dimensions: L 96 x W 36 x D 80 inches
L 240 x W 90 x D 200 cm
Weight: 1350 lb (613.6 kg)
SPECIFICATIONS
HVACTRAINING SIMULATOR Carrier
SIMULATOR DESCRIPTION◊ 460V Stand-Alone Thermo King® HVAC Training Bench.
◊ Allows clear visualization of all component operation of the electrically
operated HVAC system.
◊ It provides student diagnostic exercises using manually induced
faults.
NV-1000-01C
Voltage Input: 460 VAC, 20 AC
Dimensions: L 96 x W 36 x D 80 inches
L 240 x W 90 x D 200 cm
Weight: 1350 lb (613.6 kg)
SPECIFICATIONS
HVACTRAINING SIMULATOR Thermo King
SIMULATOR DESCRIPTION◊ Air Brake Trainer consists of Bendix and WABCO brake products including the WABCO ABS/ATC bus system. ◊ Valves and air system completely functional and typical of the bus.◊ Toothed wheels for the ABS sensors are mounted on 12 VDC motors. Motor/toothed wheel speeds are regulated by an electronic controller to simulate ABS stop and traction control events. ◊ An engine simulator is installed for proper operation of the ATC function. Over 20 ABS / ATC faults are inserted by fault switches mounted on the rear of the display.
NV-1000-07
* The 40’ trainer includes two panels and the 60’ has three panels.
Voltage Input: 120 VAC, 15 AC
Air Input: Standard ¼” air fitting - 120 psi
Dimensions: L 80 x W 79 x D 28 inches
L 200 x W 197.5 x D 70 cm
Weight: 400 lb (181.8 kg)
SPECIFICATIONS
PNEUMATIC BRAIKINGTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ 380HP Stand-Alone Cummins® Training Bench
◊ Allows clear visualization of all component operations of the electrically
and mechanically operated engine system.
◊ Demonstrates basic system operation, the trainer provides student diag-
nostic exercises using manually induced faults.
HV-950-ISL
Voltage Input: 120 VAC, 15 AC
Dimensions: L 95 x W 74 x D 84 inches
L 228.6 x W 188 x D 213 cm
Weight: 3800 lb (1723.6 kg)
SPECIFICATIONS
FULL DIESEL ENGINEAND TRANSMISSIONTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Includes all the components required to demonstrate the operation of a
complete door operation with ActiveAir, Class system and APC systems.
◊ Allows students to visualize components, be able to perform door adjust-
ment, and testing on the Class and APC systems.
◊ Mounted on a movable frame that allows access to components for in-
spection and service.
NV-1000-09
* This simulator can be updated with an additional com-plete door.
Voltage Input: 120 VAC, 15 AC
Air Input: Standard ¼” air fitting - 120 psi
Dimensions: L 66 x W 53 x D 96 inches
L 165 x W 132.5 x D 240 cm
Weight: 425 lb (193.2 kg)
SPECIFICATIONS
DOORTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Ramp with the same hardware as in a bus
◊ Allows students to visualize component function, perform adjustments
and perform system testing.
◊ The ramp is cutaway to show the cylinder and sensors operation.
NV-1000-08
Voltage Input: 120 VAC, 15 AC
Dimensions: L 80 x W 42 x D 43 inches
L 200 x W 105 x D 107.5 cm
Weight: 360 lb (163.6 kg)
SPECIFICATIONS
WHEELCHAIR RAMPTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Front and side destination signs with the same hardware as in a bus
◊ Control unit with USB port for destination message download
◊ Allows students to visualize component function, perform adjustments,
and practice system testing.
NV-1000-11
Voltage Input: 120 VAC, 15 AC
Dimensions: L 72 x W 26 x D 72 inches
L 180 x W 65 x D 180 cm
Weight: 180 lb (81.8 kg)
SPECIFICATIONS
DESTINATION SIGNTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Fire suppression system with the same hardware as in a bus
◊ Control unit and manual switch
◊ Allows students to visualize component function, perform adjustments,
and practice system testing.
NV-1000-10
Voltage Input: 120 VAC, 15 AC
Dimensions: L 72 x W 26 x D 66 inches
L 180 x W 65 x D 165 cm
Weight: 180 lb (81.8 kg)
SPECIFICATIONS
FIRE SUPPRESSIONTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Its main components are the articulation, the control system and the
damping system.
◊ An electronic control unit detects the operating conditions, controls driv-
ing performance and allows early fault diagnostics.
◊ Includes fault insertion.
◊ To use the simulator, remove the top, then plug the power cord into a
standard 120V 15A outlet.
NV-1000-12
Voltage Input: 120 VAC, 15 AC
Dimensions: L 32 x W 21 x D 13 inches
L 80 x W 52.5 x D 32.5 cm
Weight: 60 lb (27.3 kg)
SPECIFICATIONS
ARTICULATIONTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Allows instructors to demonstrate the operation of a complete hybrid drivetrain.
◊ Shows all EV drive components speed in real time for all modes of operation.
◊ Shows the high voltage safety system that opens a relay, which disconnects the
HV battery whenever any access cover is opened.
◊ Demonstrates the operation of both transmission clutches as the bus accelerates
and decelerates.
NV-1000-05
Voltage Input: 120 VAC, 15 AC
Dimensions: L 50 x W 26 x D 72 inches
L 125 x W 65 x D 180 cm
Weight: 150 lb (68.2 kg)
SPECIFICATIONS
HYBRIDTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ This public announcement (PA) simulator is a replica of the bus’ PA sys-
tem, including power supply and the controls required to use the system
in a classroom.
PUBLIC ANNOUCEMENTTRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Front axle including disc brakes.
◊ Allows visualization of components of the Front axle.
◊ In addition to the axle system, the trainer provides the possibility to per-
form disc brake replacement.
NV-1000-13A
* An optional Brake Control Box is available to apply air pressure and perform brake pad replacement.
Dimensions: L 35 x W 106 x D 48 inches
L 94 x W 270 x D 122 cm
Weight: 1537 lb (697.1 kg)
SPECIFICATIONS
FRONT AXLETRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Rear axle including disc brakes.
◊ Allows visualization of components of the Rear axle.
◊ In addition to the axle system, the trainer provides the possibility to per-
form disc brake replacement.
NV-1000-13B
* An optional Brake Control Box is available to apply air pressure and perform brake pad replacement.
Dimensions: L 90 x W 70 x D 58 inches
L 229 x W 178 x D 147 cm
Weight: 2602 lb (1180.3 kg)
SPECIFICATIONS
REAR AXLETRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Front Brake simulator with air chamber
◊ Uses shop air, the service and parking brakes can be applied
◊ Brake system can be dismantled, adjusted and the brakes can be
measured
NV-1000-13C
Dimensions: L 63 x W 32 x D 50 inches
L 160 x W 82 x D 127 cm
Weight: 1053 lb (477.6 kg)
SPECIFICATIONS
FRONT CALIPER AXLETRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ Rear Brake simulator with air chamber
◊ Uses shop air, the service and parking brakes can be applied
◊ Brake system can be dismantled, adjusted and the brakes can be
measured
NV-1000-13D
Dimensions: L 40 x W 68 x D 61 inches
L 101.6 x W 173 x D 155 cm
Weight: 1802 lb (817.4 kg)
SPECIFICATIONS
REAR CALIPER AXLETRAINING SIMULATOR
SIMULATOR DESCRIPTION◊ The Virtual Pneumatic Simulator is intended to help mechanics develop
troubleshooting skills at their own pace.
◊ The simulator explains the braking system (Primary, Secondary, Door
Interlock, Park, Brake and Emergency). It also provides an animated 3D
view of all the major components and their location in the bus.
◊ Troubleshooting scenarios are pre-programmed to have mechanics
identify the source of potential problems. The virtual model also makes
the tool easily accessible without having to handle large mock ups.
VIRTUAL PNEUMATICTRAINING SIMULATOR
novabus.com
CONTACT INFORMATIONDaniel Thériault Manager, Publications and Customer [email protected] : 438-843-1545Mobile : 514-497-0094