1-1

Getting Startedte

.

a NI

n

OO

........................... 1-20ode........................ 1-20

........................... 1-21

................................ 1-21

................................ 1-21

................................ 1-21tion ................... 1-22el............................ 1-22................................ 1-22atus........................ 1-22de.......................... 1-23

1

HandseBasic KOpeninFront K

DisplayDisplay

USIM CBeforeOther USIM PUSIM C

BatteryNotes oBatteryOpen PChargi

Power OPower Power

Parts....................................... 1-2y Operations ................................ 1-3

g/Closing Handset......................... 1-7eys.................................................. 1-7................................................. 1-8 Indicators ...................................... 1-8rd .......................................... 1-10Using USIM Card ......................... 1-10otes on USIM Cards.................... 1-10Ns................................................. 1-11ard Installation ............................ 1-12& AC Charger........................ 1-13n Battery Charging..................... 1-13 Installation ................................. 1-13ort Cover...................................... 1-15g Battery..................................... 1-16n/Off .................................... 1-18n................................................. 1-18ff ................................................ 1-19

Mobile Manners .....Activating Manner M

Codes.......................Security Code ...........Center Access Code..Network Password ...

Other Basic InformaChecking Battery LevMy Phone Number...Checking Network StUsing Power Save Mo

　

Handset Parts

arpiece/Speaker3

harging Indicator/Illuminationisplayont Keys (Right) l (Top)4

(Center) ;(Left) : (Bottom)

ulti Selector Xd & Xb4

ail Key Xo4

enu Key Xi4

nd Key Wr4

eypad W0 - W94

Key Ww4

/Manner Key Wq4

ower/End Key Wy4

lear/Back Key Wt4

ortcut Key Xu4

ahoo! Keitai Key Xp4

ght Sensorghtamera Indicatorattery Coveremory Card SlotliCa Mark

ameraternal Antenna1

frared Porticrophonerap Eyelet

xternal Device Port2

1-2

Ge

tting

Sta

rted

1

2 16

1

3

15

11

26

1413

12

32

3130

29

17

18

23

20

22

21

19

456789

10

25

24

27

28

◎SoftBank 930CA 1 E2 C3 D4 Fr

5 M6 M7 M8 Se9 K1011 #12 P13 C14 Sh15 Y16 Li17 Li18 C19 B20 M21 Fe22 C23 In24 In25 M26 St27 E

1-3

Handset PartsG

ettin

g S

tarte

d

1 Operations

en handset open; Landscape view when

hen using Camera.

Handset Closed)

tions Description

Activate Snap Viewer.1

Activate Camera in Photo Mode.1

old a Activate Camera in BI-DO-RI Mode.1

Activate TV.2

old k Set/cancel Manner Mode.

tions Description

Activate/operate Quick Launcher.

Lock/unlock Side Keys and Front Keys.

old k Set/cancel Manner Mode.

Basic Key◎In Standby

1 Portrait view whclosed.

2 Acts as shutter w

◎In Standby (

1 For optimal signal reception, do not cover Internal Antenna with hands or anything else. Do not put stickers over Internal Antenna.

2 Connect AC Charger or supplied Stereo Earphone Conversion Cable to use earphone-microphone. See instructions included with Stereo Earphone Conversion Cable.

3 Earpiece also functions as speaker. Be careful of ringtone/alarm sounding close by your ear when receiving or ending a call.

4 Key illustrations are simplified and differ in appearance from actual handset keys.

28 Lock Key k4

29 Shutter Key Zz4

30 Camera Key a4

31 Viewer Key Ys4

32 Digital TV Antenna No. Key/Opera

31 s

30 a

Press and h

29 z

28 Press and h

No. Key/Opera

4 l;:

28 k

Press and h

1

Handset Parts

Ge

tting

Sta

rted

1Activate function assigned to key.Default Setting: Schedule

old u Assign a function to key.

Answer/make calls.Open Quick List.

Play messages on Answering Machine.

ld t Set/cancel Answering Machine.

ld y Turn power on/off.

ld 3 Set/cancel IC Card Lock.

ld 5 Activate/deactivate Power Save Mode.・ Display is dimmed in Power Save

Mode.

ld 7 Set font type, thickness and size.

ld 8 Set Screen Filter on/off.・ Display becomes opaque.・ Setting returns to off when

powered back on.

tions Description

-4

◎In Standby (Handset Open)

No. Key/Operations Description

5 f Access Shortcuts.

Press and hold f Open S! Quick News List.

g Open Phone Book Search menu.

h Open Received Calls window.

Press and hold h Open Received Address List.

j Open Redial window.

Press and hold j Open Sent Address List.

d Open Main Menu.

6 o Open Mail menu.

Press and hold o Compose a new message.

15 p Access Yahoo! Keitai portal.

Press and hold p Open Yahoo! Keitai menu.

7 i Open Main Menu.Open Task Switch window (when multitasking).

14 u

Press and h

8 r

13 t

Press and ho

12 Press and ho

9 Press and ho

Press and ho

Press and ho

Press and ho

No. Key/Opera

1-5

Handset PartsG

ettin

g S

tarte

d

1

Calls (Handset Closed)

microphone attached. Call ends when d earphone-microphone not attached.

Entry

Hold call.

End call.

ld q Set/cancel Manner Mode.In Manner Mode, voice sent via microphone is amplified on caller’s side.

tions Description

Increase earpiece volume*.

Decrease earpiece volume*.

tions Description

Insert line feed “ “ (when cursor is at the end of text).

Add a space (when cursor is at the end of text).

tions Description

◎During Voice Calls (Handset Open)

◎During Voice

* When earphone-handset closes an

◎During Text

9 Press and hold 9 Toggle Light on/off.

Press and hold 0 Enter “+“ (international access code).

11 Press and hold q Set/cancel Manner Mode.

No. Key/Operations Description

5 f Increase earpiece volume (alternatively, use Viewer Key).

Press and hold f Continuously increase earpiece volume.

g Decrease earpiece volume (alternatively, use Camera Key).

Press and hold g Continuously decrease earpiece volume.

h Open Received Calls window.

j Open Redial window.

6 o Turn handsfree on/off.

7 i Open Task Switch window.

14 u Display function menu.

No. Key/Operations Description

13 t

12 y

11 Press and ho

No. Key/Opera

31 s30 a

No. Key/Opera

5 g

j

No. Key/Opera

1

Handset Parts

Ge

tting

Sta

rted

1Enter dakuten (゛) or handakuten (゜) (in 5-touch, 2-touch or T9 mode).Toggle case (in 5-touch or 2-touch mode).Insert line feed “ .“

ld w Select area.

Toggle Shift, Caps Lock and lower case modes (when entering alphanumerics in T9 input mode).

ld q Paste copied or cut text.

tions Description

-6

6 o Toggle character entry mode (in 5-touch or T9 input mode).Toggle double-byte and single-byte characters (in 2-touch mode).

Press and hold o Toggle text input methods (in 5-touch, 2-touch or T9 input mode).

15 p Switch to pictograph/symbol lists.

Press and hold p Access My Pictograms (in S! Mail).

8 r Cycle characters in reverse order (in 5-touch mode).

Press and hold r Undo last operation (conversion, pasting, cut, etc.) and return to the previous state.

13 t Delete one character to right of cursor.When cursor is at end of text, a character to left is deleted.

Press and hold t Delete all text to right of cursor. When cursor is at end of text, delete all text.

No. Key/Operations Description

10 w

Press and ho

11 q

Press and ho

No. Key/Opera

1-7

Handset PartsG

ettin

g S

tarte

d

1sactivate/operate Quick Launcher when From Quick Launcher, access Camera, TV,

in Landscape or Portrait view, position s.

(Bottom) to scroll through menu then press item.lock Front Keys.

t Keys are indicated as follows. (Top): : (Bottom): ;

Front Key

Top Front Key

Front Key

Portrait Viewe View

Opening/Closing Handset Front KeyUse Front Keys to handset is closed. Music Player, etc.● To use Front Keys

handset as follow

● Use : (Top) or l; to select an

● Use k to lock/un

Tip･ Functions activated while handset is closed remain active after

opening handset.

Note･ Opening or closing handset while touching Front Keys or Side

Keys may cause malfunction. Set Keypad Lock (press Kk while handset closed) to prevent malfunction.

Slide Display open. Slide Display shut.

Tip･ In this guide, Fron

Top Front Key: lBottom Front KeyCenter Front Key

Center

Bottom Front Key

Landscap

Display

microSD Mode/ Handsfree Device Connected in

Communication/microSD Mode/ USB Cable & Handsfree Device Connected

in Communication/microSD Mode Vibration Set for Incoming Calls & Messages/ Vibration Set for Incoming

Calls/MessagesNo Ringtone for Incoming Calls & Messages

/ No Ringtone for Incoming Calls/Messages

Manner Mode Auto Manner Mode Start On Auto Manner Mode Release OnAlarm SetAlarm Set for Today (appears prior to set time.) TV Timer Recording in Progress New Messages at Voice Mail Center - Voice Messages on Answering Machine - Video Messages on

Answering Machine* Lock Key is ON by default.

Tip･ To see indicator descriptions:Xd Settings Xd Display Xd Icons Xd

1-8

Ge

tting

Sta

rted

1

Display Indicators

Battery LevelTemperature Monitoring Signal Strength

Out of Range Emission OFF Mode USIM Lock Active

Yahoo! Keitai ModeYahoo! Keitai Communication in ProgressPacket Transmission (No Data Transfer)Connecting to Network for Packet Transmission

/ Packet Transmission (Sending/Receiving Data)

SSL Secured Site ConnectedUnread MessagesHandset Message Memory Full

USIM SMS Memory Full ( when there are unread messages)Handset & USIM SMS Memory FullSoftware UpdatedDial Lock ActiveSecret Mode/Secret Data Only ModeCustom Lock ActiveCustom Lock Active in Secret Mode/Secret Data Only ModeInfrared TransmissionAuthenticating IC CardS! Addressbook Back-up SynchronizingIC Card Lock ActivePower Save ModeScreen Filter On ( when Backlight is Off)Keypad Lock Active (After Closed, Timer or Lock Key is ON*)Memory Card InsertedInvalid Memory Card InsertedMemory Card Reader/Writer in UseAccessing Memory CardVoice CallVideo CallMaximum Call Cost Limit Reached

/ USB Cable Connected in Communication/microSD Mode

① ② ③④⑤⑥ ⑦ ⑩⑧⑨ ⑪ ⑫

⑬ ⑭ ⑮ ⑯ ⑰ ⑳⑲⑱

③

1-9

DisplayG

ettin

g S

tarte

d

1

More Features

Customize

Display SettingsWallpaperDisplay Color SchemeSet Font TypeInterface LanguageGuard from Prying EyesDisplay Quality

(☛ P. 14-4)

BacklightSet Backlight & Power SavingSet Brightness of Backlight

(☛ P. 14-7)

Standby IndicatorsEnable Indicator Selector

(☛ P. 14-10)

USIM Card

es on USIM Cardshe property of SoftBank.e reissued for a fee if lost or damaged.

ds to SoftBank upon cancellation or vice. ards are recycled.cations and performance may change without

opy of data saved on your USIM Card. ble for lost data.andset (with USIM Card inserted) is lost or ervice immediately. For details, contact er Center, General Information (P. 15-52). (S! Appli, videos, Saved Pages, etc.) saved to ry card may be inaccessible after USIM Card dset upgrade or service subscription different USIM Card is inserted, the cookies ared to protect personal information.

IC Chip

1-1

Ge

tting

Sta

rted

1

0

Before Using USIM CardUniversal Subscriber Identity Module (USIM) Card is an IC card that contains customer information (phone number, etc.). A USIM Card must be inserted to use your handset.● Store Phone Book entries and SMS on USIM Card.● Insert USIM Card into other USIM-compatible SoftBank

handsets to use information on Card.●Do not apply excessive force when inserting/removing USIM

Card.● SoftBank is not liable for any damage caused by inserting USIM

Card into other IC card readers/writers.●USIM Card may become warm during use. This is not a

malfunction.● Keep IC chip clean.● For details, refer to the manual supplied with your USIM Card.●Do not drop USIM Card or subject to excessive shock. Doing so

may cause malfunction.●Do not bend USIM Card or place heavy objects on it. Doing so

may cause malfunction.●Avoid extreme temperatures.●Do not scratch, carelessly touch or short-circuit the IC chip.

Doing so may result in data loss or malfunction.●Clean USIM Card with a dry soft cloth (such as is used for

eyeglasses).●Use a SoftBank-designated USIM Card. Using a non-designated

card may result in handset malfunction.

Other Not● USIM Cards are t● USIM Cards will b● Return USIM Car

suspension of ser● Returned USIM C● USIM Card specifi

prior notice.● Keep a separate c

SoftBank is not lia● If USIM Card or h

stolen, suspend sSoftBank Custom

● Downloaded fileshandset or memoreplacement, hancancellation. If a and cache are cle

1-11

USIM CardG

ettin

g S

tarte

d

1

tly entered ten times consecutively, USIM Card dset is disabled.ctly entered ten times consecutively, ing PIN2 entry are all disabled.PUK.ard lock, contact SoftBank Customer Center, ion (P. 15-52).

USIM PINsThere are two security codes for USIM Cards: PIN1 and PIN2.

PIN1PIN1 is a four- to eight-digit code to prevent unauthorized handset use by a third party.●Default PIN1 is 9999.● PIN1 can be changed (P. 4-2).●When PIN1 Code Entry Set is set to ON, PIN1 must be entered

each time handset is turned on to be used.

PIN2PIN2 is required to reset total call cost or to set a maximum limit to call costs.●Default PIN2 is 9999.● PIN2 can be changed (P. 4-2).

PIN Lock & Cancellation (PUK)If PIN1 or PIN2 is incorrectly entered three times consecutively, PIN Lock is activated, limiting handset use to specific functions. Enter Personal Unblocking Key (PUK1/PUK2) to cancel PIN Lock.● For information on PUK, contact SoftBank Customer Center,

General Information (P. 15-52).

Note･ If PUK1 is incorrec

is locked and han･ If PUK2 is incorre

operations requir･ Write down your ･ To cancel USIM C

General Informat

1

USIM Card

Ge

tting

Sta

rted

1ll the way in

t by catch and remove USIM Card

hesve force to pull Tray; may slide out

lign Tray horizontally, then push in all the

Properly Inserted

-12

USIM Card Installation● Remove Battery (P. 1-13) before inserting or removing USIM

Card.

Insertion

Pull Tray out by catch

Place USIM Card on tray with gold IC part facing downward, in the orientation shown

Push Tray a

Removal

Pull Tray ou

If Tray DetacDo not use excessicompletely.If Tray detaches, away.

12

Side with gold IC visible facing downward

Notch

Tab

1

2

3

1

1-13

Ge

tting

Sta

rted

1

Battery & AC Charger

stallation

mark and slide off Battery Cover

ly so handset does not slide open when Cover.

Notes on Battery Charging●Charge battery at least once every six months. If battery is left

uncharged for a long period, it may become unusable or its operation time may decrease.

●Avoid connecting too many things to one AC outlet. Doing so may cause the AC outlet to overheat and cause a fire.

● Battery and AC Charger may become warm during charging, but this is not a malfunction. If they become too hot, however, stop charging and contact SoftBank Customer Center, Customer Assistance (P. 15-52).

● If Charging Indicator flashes during charging, battery may be faulty. Contact SoftBank Customer Center, Customer Assistance (P. 15-52).

●Depending on the conditions of usage, the battery may expand as it nears the end of its life. However, this presents no safety problems.

●Check the battery type on its label:

Battery InInsertion

Press “ “

Mark Type

Li-ion00 Lithium-ion batteryLithium-ion batteries are a recyclable resource. Do not dispose of them as municipal waste. Bring used batteries to your nearest SoftBank Shop or recycling center after insulating the terminals with tape. Observe local regulations on battery disposal.

Note･ Hold handset firm

removing Battery

1

1

Battery & AC Charger

Ge

tting

Sta

rted

1

before removing battery.

tery cover

b (①), lift out battery (②)

ery Cover shut. Tab may be misaligned, and

-14

Align terminals and insert in direction shown (①), and then press into handset (②).

Replace cover

Removal● Turn off handset

Remove bat

Pressing Ta

2

2

1

Terminals

facing upwardB

3

Note･ Do not force Batt

cause breakage.

12

Tab

1-15

Battery & AC ChargerG

ettin

g S

tarte

d

1ver (as indicated by arrow ①)

Cover (as indicated by arrow ②)ive force may cause damage.ompletely open (as illustrated) while Port

connected to an external device, be cautious essive force may damage it.

Open Port CoverPull Port Co

Rotate Port●Using excess●Keep Cover c

is in use.

21 Port Cover

Slot

Note･ When handset is

of Port Cover. Exc

12

1

Battery & AC Charger

Ge

tting

Sta

rted

1over

er connector into External Device

rger blades and plug into an AC

ator lights while charging. When plete, Indicator goes out.

connector from handset Release Tabs to remove connector.

over

rger from AC Outlet

e charged while inserted in handset.ndicator and Display Indicator go out and Stop Charge appears, disconnect handset and remove battery. Set up handset and charging again. If the same error occurs, AC aulty. Contact SoftBank Customer Center, nce (P. 15-52).ndicator and Display Indicator are temperature is unsuitable for charging nitoring). Wait until handset cools down.

-16

Charging BatteryUsing AC ChargerUse only SoftBank-specified AC Charger “ZTDAA1“ (sold separately). In this guide, the ZTDAA1 model AC Charger is referred to as “AC Charger.“

Open Port CSee P. 1-15.

Insert ChargPort

Extend ChaOutletCharging Indiccharging is com

Disconnect Press and hold

Close Port C

Unplug Cha

External Device Port

Connector

Release Tabs

Port Cover

1

2

3

Blades

AC Charger

Note･ Battery can only b･ When Charging I

Charge Unusualfrom AC ChargerCharger and startCharger may be fCustomer Assista･ When Charging I

flashing, handset(Temperature Mo

1

2

3

4

56

1-17

Battery & AC ChargerG

ettin

g S

tarte

d

1

More Features

Customize

BacklightSet Backlight during Charging

(☛ P. 14-7)

Power On/Off

◎Retrieving Network InformationWhen o, p, i or d is pressed after initial setup, a prompt appears. Select YES to update network settings.

Tip･ Setup prompt no longer appears when

all the initial setup items have been set.･ The default Security Code is 9999.

Tip･ Retrieve network information to use

network-related services, such as mail and the Internet.･ To manually update network settings:d Settings d Connection Settings d Retrieve NW Info

d YES d

1-1

Ge

tting

Sta

rted

1

8

Power On●Make sure USIM Card is correctly

inserted before turning power on.

Press and hold y

◎Powering Handset On for the First Time (Initial Setup)Setup prompt appears in Japanese. Select NO and press d to exit.After changing interface language to English (P. 14-6), restart handset and perform setup procedure as follows.

[Initial Settings] window YES d

Auto d Select a time zone d

■To Manually Enter Date & Time Manual (Date Time Set) d Select a time zone d

Enter date and time d

Enter Security Code (9999) d Enter new Security

Code d YES d

Select a font size d■When Separate Setting is

SelectedSet a font size for each function window (P. 14-6).

[Keypad Sound Setting] window ON or OFF d

Tip･ After USIM Card is replaced, Security Code

is required when powering handset on for the first time. If Security Code is incorrectly entered five times, handset shuts down. Turn handset on again.

1

1

2

3

4

5

1-19

Power On/OffG

ettin

g S

tarte

d

1Key

Set Key Sound Off（☛ P. 14-39）

◎Welcome MailYou will find a Welcome mail from CASIO in Inbox at time of purchase.

Power OffPress and hold yHandset shuts down.

More Features

Customize

ClockHide ClockSet Auto Time AdjustmentManually Adjust TimeSummer TimeTime Zone (Sub Clock)Hide Sub ClockSummer Time (Sub Clock)Time Zone Major City (Sub Clock)

(☛ P. 14-2)

Auto Power On/OffSet Auto Power On/Off

(☛ P. 14-3)

Display SettingsSet a Wake-up ImageSet a Wake-up MessageSet Font Sizes CollectivelySet Font Size for Each Function Window

(☛ P. 14-4)

SoundsSet Handset Open/Close Sound

(☛ P. 14-14)

Tip･ Packet transmission fees apply when

accessing links in Welcome mail.･Welcome mail can be deleted but after

initializing handset, it will reappear in Inbox.

1

Mobile Manners

More Features

Customize

Manner ModeSet Manner Mode TypeConfigure Original Manner ModeSet Time for Auto Manner Mode StartSet Time for Auto Manner Mode ReleaseToggle Auto Manner Mode Start and Release On/Off

(☛ P. 14-13)

1-2

Ge

tting

Sta

rted

1

0

Use your handset responsibly. Inappropriate handset use can be both dangerous and bothersome. Take care not to disturb others when using your handset. Adjust handset use according to your surroundings.● Turn handset power off in theaters,

museums and other places where silence is the norm.

● Refrain from use in restaurants, lobbies, elevators, etc.

●Observe signs and instructions regarding handset use aboard trains, etc.

● Refrain from use that interrupts the flow of pedestrian or vehicle traffic.

Activating Manner Mode

Most handset sounds are muted in Manner Mode.

Press and hold q■To Cancel Manner Mode

Press and hold q

Note･ When handset is set to vibrate for

incoming calls, be careful as handset may slide off, slide into a stove, etc.

Tip･ Shutter click sounds even in Manner

Mode.･ Press and hold Wq to set or cancel

Manner Mode during a call. Short beeps sound through the earpiece when Manner Mode is set or canceled during a call.･ Set or cancel Manner Mode by

pressing and holding k.

1

1-21

Ge

tting

Sta

rted

1

Codes

Network PasswordNetwork Password, a four-digit code assigned at initial subscription, is required to use Call Barring.● If Network Password is incorrectly

entered three times, Call Barring settings are locked. Network Password and Center Access Code must be changed.

Security Code, Center Access Code and Network Password are required to use handset.●Do not reveal these codes to others.

Write down your codes.● SoftBank is not liable for any damage

due to handset misuse.

Security CodeSecurity Code, 9999 by default, is required to use some handset functions. The code can be changed.● If Security Code is entered incorrectly or

nothing is entered for 15 seconds, a tone sounds and a message appears. Enter correct Security Code.

● Security Code is referred to as 操作用暗証番号 (operation code) on SOFTBANK MOBILE Corp. Website (http://www.softbank.jp).

Changing Security Code

d Settings d Security d Change Security Code d

Enter current Security Code d

Enter new Security Code d YES d

Center Access CodeCenter Access Code, a four-digit code assigned at initial subscription, is required to access Optional Services via landlines or to subscribe to fee-based information.

Note･ The warning tone does not sound in

Manner Mode or when Keypad Sound is set to OFF.

1

2

3

Other Basic Information

Checking Network Status

Check Network Status to confirm if voice calls and/or packet transmission is available.

d Settings d Other Settings d Network Status dNetwork information appears.

Dialing Packet Transmission Description

not available

not available

Voice calls/packet transmission not possible.

available not available

Voice calls possible, packet transmission not possible.

not available

available Voice calls not possible, packet transmission possible.

1

1-2

Ge

tting

Sta

rted

1

2

Checking Battery LevelUse Battery Level meters as a guide only.

Battery Level IndicatorBattery Level indicator appears at top of Display.

Sufficient Low Almost out. Charge immediately. (Flashing) Charging

Battery Level Beeper & Large IndicatorCheck battery level by number of beeps and large indicator.

d Settings d Other Settings d Battery Level dA large battery level indicator appears. Beeps sound according to the battery level.Three short beeps: SufficientTwo short beeps: LowOne short beep: Almost out. Charge immediately.

◎When Battery Is EmptyRecharge Battery appears, the battery alarm sounds for about 10 seconds, and handset powers off in about 60 seconds. Charge battery.

My Phone NumberCheck handset phone number.

d 0Account Details appear.

■Add Other Information u Edit Enter Security

Code d Select an item d Enter information d o

■View All Information u Display All Data d Enter Security Code d

v to switch tabs

■Reset Account Details u Reset d YES

d

1

Note･ The battery level beeper does not sound

in Manner Mode or when Keypad Sound is set to OFF.

1

1-23

Other Basic InformationG

ettin

g S

tarte

d

1

“Out of Service Area“ appears when out of range.

Using Power Save Mode

When set to Power Save Mode, light, sound, and Display settings are modified to decrease battery consumption.

Press and hold 5Power Save Mode is set, and “ “ appears.

■Canceling Press and hold 5

available available Voice calls/packet transmission possible.

Tip･ Power Save Mode is canceled when

power is turned off and on again.

Dialing Packet Transmission Description

1

Note･ Display Settings set during Power Save

Mode remain, even after Power Save Mode is deactivated.