hardware, building & construction - mcginns€¦ · hardware, building & construction...

© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282

461

HARDWARE, BUILDING & CONSTRUCTION

AXES/SPLITTERS

Tasmanian Pattern Axe (Hickory Handle)• Made in Sweden• 2.0kg/4.5lbs 813mm/32”• Hickory handle

Material No. ATR45C32

NEW Super Splitter AxeAn Axe and Blocksplitter in one. The SuperSplitter Axe takes all the advantages of a conventional axe – lightweight design with cutting head and balance shaft – and adds two angled deflecting flanges to the cheeks. This drives the timber apart on impact in the same way a conventional wedge headed blocksplitter does. It’s ideally weighted with a positive follow-through. The perfect tool for splitting timber.

• 10 year guarantee • Contoured Australian Spotted Gum handle • 2kg drop forged, high carbon steel head • Hardened, tempered and hand sharpened • Suitable for both soft and hard woods • Lacquer sealed handle • Made in Australia

Product Code Width Length Overall Length

603600 140mm 190mm 795

BRuSHES - PAINT

Industrial Brush RangeA wooden handled, white hog bristle brush designed for use with fibreglass resins and strong solvents.

Part No. Description Size

3140 Industrial 12mm








Flat Varnish Brush RangePlastic handled, hog bristle brush, designed for use with varnish and oil-based paints.


1345 Flat Varnish 25mm




Economy Brush RangeA general purpose, economically priced, black hog bristle brush.


4040 Economy 25mm

4047 Economy 50mm


4054 Economy 75mm

4061 Economy 100mm

HAND

TOO

LS

82© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282

fatMax® xtreme™ fubar™ - functional utility BarWeight: 1.8kg/64oz. Forged from one piece of high carbon steel. Two-tiered jaw for grabbing common dimensional lumber and decking, tempered chisel blade for splitting and cutting building materials, large mouth striking face for maximum demolition effect, bevelled nail slot for pulling and prying nails, textured bi-material grip is over-moulded directly onto the bar for excellent comfort and control even when wet.

Part Number: 55.099

HaMMeRS – utility

fatMax® fubar™ ii functional utility BarWeight: 1kg/35oz. Easy to swing 1kg total weight. 22oz head weight – similar to a hammer. Serrated jaw for gripping timber, tapered nail slot for pulling nails. One piece forged steel. Textured cushion grip for comfort and control. Beveled chisel/prying end.

Part Number: 55.119

Part Number description Weight5WHRg Welding Hammer Alloy Head c/w Rubber Grip 0.52kg5WHSP Welding Hammer Alloy Head c/w Spring Grip 0.45kg

HaMMeRS - WeldiNg

Welding Hammers • Used for chipping off slag and spatter around welds• Also used as geologist’s or miner’s tool• Head forged from chrome alloy steel• Excellent balance, with hardened ends that do not flatten when chipping• Correctly heat treated to best suit product application* Warning wear safety goggles user and bystander

HaNdleS

Handles All handles are kiln dried, fine sanded and lacquered ensuring long life even in dry environments. Made to Australian Standards (AS1729-1994) Grade A.

Product Code description

tRa380 380mm Hardwood Hatchet Handle

tRa600 600mm Hardwood Axe Handle

tRa800 800mm Hardwood Axe Handle

tRBP300 300mm Hardwood Ball Pein Hammer Handle

tRBP450 400mm Hardwood Ball Pein Hammer Handle

tRB1350/22 22mm Diameter, 1350mm Hardwood Broom Handle

tRC250 250mm Hardwood Club Handle Handle

tRH1350 1350mm Hardwood Hoe Handle

tRMP900 900mm Hardwood Mattock/Pick Handle

tRR1350/25 25mm Diameter, 1350mm Hardwood Rake Handle

tRS750 750mm Hardwood Sledge Handle

tRSd670 670mm Hardwood Shovel/Fork Handle

tRSlB1300 Bent 1300mm Hardwood Shovel Handle

tRWS900 900mm Hardwood Wood Splitter Handle

Part Number description

SaB 76262 Blue

SaB 76261 Yellow

SaB 76264 Green

SaB 76260 Red

SaB 76263 White

tRa600

tRSd670

tRMP900

aluminium Handle 1450mm x 25mm• Aluminium handle universal thread.

Metal Handle Suits BroomsMetal Handle with soft grip 25mm x 1400mm - no thread. Recommended handle for Bulldozer Brooms.

Part Number: SaB 57201

Part Number Size Weight

5fH075 75mm 0.02kg

5fH100 100mm 0.03kg

5fH125 125mm 0.04kg

5fH150 150mm 0.05kg

HaNdleS - file

file Handles • Used to handle files and other suitable tools• Pre-drilled wooden handle with metal collar• Fits to handle by placing tang of file in the hole and tapping lightly on bench until tight• Softwood timber will absorb sweat and oil when using• Available in 75, 100, 125 and 150mm sizes as well as packs of 2* Warning wear safety goggles user and bystander

ABRA

SIVE

S

48© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282

sharPeNiNG stoNe - oiL

Diamond sharpening stone oil For use on natural and synthetic oil stones. • Natural highly refined mineral oil. • Recommended for faster and easier sharpening. • Safe for kitchen use.

Part Number specification Professional Quality

87940 130ml (4½ ounces)

PartNumber

cat Gritthick mm

Width mm

Length mm

be205664 149C Fine 10 22 80

Pocket stone• Rapid cutting pocket stone for sharpening pocket knives, scissors, small tools, fish hooks, etc.

Quick sharpening combination bench stonesOne side fine abrasive the other side coarse abrasive. • For speedy sharpening to give a keen edge on chisels, plane irons and knives.

PartNumber

catthick mm

Width mm

Length mm

silicon carbide - oil filledbe173266 KS100 30 80 230be173274 108 25 50 200be173282 109 25 50 150

silicon carbide - Non oilbe146587 KS100 30 80 230be146544 108 25 50 200be377015 109 25 50 150

Part Number specificationbb380393 16 Wedge Part Number specificationbb380407 24 Wedge bb380423 80 Wedgebb380415 36 Wedge bb380431 120 Wedge

concrete Wedge blocks

WeDGe bLock - coNcretesharPeNiNG stoNe

PartNumber

cat Grit thick mm

Width mm

Length mm

be205524 196C Comb 16 75 Diameter

axestone - coarse / Fine• The axe stone is popular with timbermen and campers. It quickly puts a keen edge onto axes, tomahawks, hatchets, machetes, and sheath knives.

PartNumber

catthick mm

Width mm

Length mm

aluminium oxide - oil filledbe173304 IB8 25 50 200be173312 IB6 25 50 150

aluminium oxide - Non oilbe376981 IB8 25 50 200be377007 IB6 25 50 150

Fine sharpening combination bench stonesOne side fine abrasive the other side coarse abrasive. • For craftsmen - to sharpen high quality steel tools when the keenest edge is required.

Wire brushes

twist knot bevel brushesParticularly suitable for working in hard to reach areas such as edges and internal corners.

Part Number Description Ø mm MsFs (rPM)28504555 HSK100 10 x 1.50 26G 100 15,00028504355 HSK100 14 x 2.0 26G 100 15,000

Wheel brushesFor general cleaning using bench machines or portable hand tools. Supplied with multi-bore adaptors to fit arbors from 12 - 25.4mm.

Part Number Description Ø mm MsFs (rPM)28769155 W150 x 19mm x Multi 28G 150 6,00028035655 W200 x 19mm x Multi 28G 200 4,600

end brushesFor working in hard-to-reach areas such as cleaning of engines, dies and tools.

Part Number Description Ø mm (rPM)

28791255 D2 Flat End 30G 19 11 13 3,00028794355 D13 Pencil Flat End 30G 125 8 10 3,00028794555 D14 Pencil Pointed End 30G 50 8 10 3,000

scratch brushesIdeal for general cleaning or rust, paint, etc. and light deburring.

Part Number Description225509 4 Row Scratch Brush - Wooden handle224324 4 Row Scratch Brush - Plastic handle

Part Number Description Ø mm MsFs (rPM)28787255 TC75 10 x 1.50 26G 75 12,00028787355 TC75 14 x 2.0 26G 75 12,000

twist knot cup brushesFor heavy duty cleaning, burr, rust, weld or paint removal or surface roughening using high speed electric and air tool and drill presses.

brush Ø mm

stem length mm

hardware, building & construction - mcginns€¦ · hardware, building & construction...

Documents