harmony equipment manufacturer 500-1603 · harmony pre-consumer recycled content (lbs) co2e...
TRANSCRIPT
Equipment Manufacturer
500-1603
Harmony
Equipment Manufacturer
500-1603
Harmony
05' 10'
DATE:
SCALE:PROJECT NO:
DRAWN BY:
USER CAPACITY: AGE GROUP:
AREA: PERIMETER:
EQUIPMENT SIZE:
USE ZONE:
FALL HEIGHT:
CPSC #325ASTM F1487-
19,35M x 6,32M x 3,51M
19,00M x 6,31M
85,19 SqM. 44,81M
1,6M
11
Posts
ZZPM0008GZ 11 5in OD X 108in POST W/ (GROUND ZERO)
ZZPM0036GZ 62 5in OD X 144in STEEL POST (GROUND ZERO)
Climbers
ZZUN8396 23 12in LOG HOP
Ground Zer0 Climbers
ZZPM8390 14 THE STUMP JUMP
ZZPM8397 15 THE WACKY LOG
ZZPM8466 26 THE CRATER LADDER
Balance
ZZPM0149 77 STEP AROUND
ZZPM6857 18 CRITTER CROSSING
ZZUN7100 19 SIDEWALK
Additional Tool & Maintenance Kits
ZZPMGUID 110 PLAYMAKER GUIDELINES
ZZUN9910 111 SURFACING WARNING LABEL KIT
ZZUN9930 112 PIPE SYSTEMS MAINTENANCE KIT W/ AEROSOL
Part No. Description
Design Number: 500-1603A - Bill Of Material
Harmony
Ref.No. Quantity
Monday, October 10, 2016 Page of1 1 Playworld.com
CertifiedZZXX08101 14ft SHADE HYPAR 5 1,397.95 8,104 0 40.00 1.75 0
N/AZZXX12812 LARGE CURVED BENCH 2 152.80 364 0 4.00 0.48 0
CertifiedZZPM0008GZ3 5in OD X 108in POST W/ (GROUND ZERO)1 60.61 90 0 1.50 0.18 0
CertifiedZZPM0036GZ4 5in OD X 144in STEEL POST (GROUND ZERO)
6 482.46 704 0 9.00 1.08 0
CertifiedZZUN83965 12in LOG HOP 2 101.94 215 2 2.00 0.06 2
CertifiedZZPM83906 THE STUMP JUMP 1 199.30 715 3 2.75 0.09 1
CertifiedZZPM83977 THE WACKY LOG 1 202.01 1,115 4 0.00 0.00 1
CertifiedZZPM84668 THE CRATER LADDER 2 167.16 787 4 2.00 0.00 2
CertifiedZZPM01499 STEP AROUND 7 58.73 946 7 3.50 0.00 7
CertifiedZZPM685710 CRITTER CROSSING 1 60.88 254 2 1.00 0.00 1
CertifiedZZUN710011 SIDEWALK 1 166.13 999 3 2.00 0.26 1
N/AZZPMGUID12 PLAYMAKER GUIDELINES 1 0.00 1 0 0.25 0.00 0
CertifiedZZUN991013 SURFACING WARNING LABEL KIT 1 0.05 1 0 0.25 0.00 0
N/AZZUN993014 PIPE SYSTEMS MAINTENANCE KIT W/ AEROSOL
1 90
DescriptionConcrete
(Yds3)
TotalWeight
(lbs) Users
Design Number: 500-1603A - Compliance and Technical Data
Harmony
Pre-Consumer
Recycled Content(lbs)
CO2eFootprint
(kgs)InstallHours
Ref.No.
Reference Document: ASTM F1487
UnitASTMStatus
ActivePlay
Events
Post-
Part No. Qty.
358 813 14,384 25 68.25 3.903,050.02 15Totals:
14 Metric Tons366 Kg161 Kg1,372.51 Kg 2.96 m3
Monday, October 10, 2016 Page of1 2 Playworld.com
DescriptionConcrete
(Yds3)
TotalWeight
(lbs) Users
Design Number: 500-1603A - Compliance and Technical Data
Harmony
Pre-Consumer
Recycled Content(lbs)
CO2eFootprint
(kgs)InstallHours
Ref.No.
Reference Document: ASTM F1487
UnitASTMStatus
ActivePlay
Events
Post-
Part No. Qty.
The lay-out for this custom playscape, design number 500-1603A, has been configured to meet the requirements of the ASTM F1487 standard. In addition, each of the above components listed as "Certified" have been tested and are IPEMA certified. Components listed as "Not Applicable" do not fall within the scope of the ASTM F1487 standard and have not been tested. IPEMA certification can be verified on the IPEMA website, www.ipema.org. In the interest of playground safety, IPEMA provides a Third Party Certification Service which validates compliance.
The CO2e (carbon footprint given in Kilograms and Metric Tons) listed above is a measure of the environmental impact this play structure represents from harvesting raw materials to the time it leaves our shipping dock. Playworld Systems nurtures a total corporate culture that is focused on eliminating carbon producing processes and products, reducing our use of precious raw materials, reusing materials whenever possible and recycling materials at every opportunity. Playworld Systems elected to adopt the Publicly Available Specification; PAS 2050 as published by the British Standards Institute and sponsored by Defra and the Carbon Trust. The PAS 2050 has gained international acceptance as a specification that measures the greenhouse gas emissions in services and goods throughout their entire life cycle.
The lay-out was also designed to meet the 2010 Standards published 15-Sep-2010, by the Department of Justice when installed over a properly maintained surfacing material that is in compliance with ASTM F1951 "Accessibility of Surface Systems Under and Around Playground Equipment" as well as ASTM F1292, "Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment", appropriate for the fall height of the structure.
Installation times are based on one experienced installer. A crew of three experienced individuals can perform the installation within the given time, each member working 1/3 of the given hours. [Eg. Installation Time = 30 hours. For a crew of three, each member will work 10 hours on the installation for a total of 30 hours on the project.]
A measurement, in pounds, that qualifies the amount of material that was captured as waste and diverted from landfill during an initial manufacturing process and is being redirected to a separate manufacturing process to become a different product. E.g. 100% of our Aluminum Tubing is made from captured waste material during the manufacturing process of extruded Aluminum products such as rods, flat bars and H-channels.
A measurement, in pounds, that qualifies the amount of material that was once another product that has completed its lifecycle and has been diverted from a landfill as a solid waste through recycling and is now being used in a Playworld Systems' product. E.g. **20% to 40% of the steel in our steel tubing and sheet steel have been diverted from landfills. Automobiles are scrapped and recyclable steel is purchased by the steel mill that produces our raw product.** The amount of Post-Consumer recycled steel fluctuates daily based on the availability of the recycled steel.
ASTM F1487
2010 ADA Standards for Accessible Design
Installation Times
Carbon Footprint
Pre-Consumer Recycle Content
Post-Consumer Recycle Content
Monday, October 10, 2016 Page of2 2 Playworld.com