harris 1500 brochure
TRANSCRIPT
A.H. Harris & Sons, Inc.367 Alumni Road
Newington, CT 06111
Tel (860) 665-9494
Fax (860) 665-9444
www.ahharris.com
CLAMP SYSTEM
Made By Americans
Made For Americans
Imperial Dimensions
Six Panel Heights
Six Panel Widths
Light Weight
1500 PSF
CLAMP SYSTEM
Modular VersatilityHARRIS 1500™ panels come in 36 different sizes and can be combined vertically or
horizontally to create almost any dimension. HARRIS 1500™ is the only handset clamp
system that does not have a Top or Bottom! Panel orientation is not an issue with this
revolutionary handset clamp system! A full line of accessories and hardware makes
configuring gangs and setting details quick and simple. A design so economical, that
no additional hardware is required for transitioning from handset to crane set.
System StrengthPanels, clamps and ties are designed to withstand 1500 psf of concrete pressure!
HARRIS 1500™ panels are the strongest handset panels available in the world! The
system is manufactured with 70ksi steel frames. Frames and accessories are all hot
dipped galvanized to ensure a long service life. The unique corner casting protects
the panel frame from job site abuse. The form face is nine ply ½” birch plywood with
a 220/220 plastic resin overlay on both sides to provide a high quality concrete finish
and extended panel life.
Handset CapabilityThe HARRIS 1500™ system only weighs 6.8 lbs per square foot! The panels quickly
clamp together to create the fastest setting handset system in the world! System
transitions from a handset system to a gang form system instantly! No additional
hardware is required to cycle formwork from placement to placement. HARRIS
1500™ clamps eliminate the need for horizontal walers even when moving large
gangs. The patented clamp only weighs 7 pounds and completely aligns the form
with one hammer strike.
AccessoryHoles
Climbing Rods
T Bolt Hat Section
Cast CornerBlock
One Hammer Strike Clamp
16D Nail Holes
1 2For more information about Harris 1500™ products, call us at: (860) 665-9494
Cast CornerBlock
T Bolt Hat Section
Climbing Rods
IntercostalMember
2” Pre Punched Hole Pattern
BulkheadApplication
Stop EndApplication
Column Configuration Application
Harris MulitClaw
Open Tie Box Design
Steel FrameProfile
Harris 1500™ Mulit-Purpose PanelHARRIS 1500™ multi-purpose panel is designed
with all the features of the standard panel. In
addition this panel is pre-punched on 2” centers
which provides multiple options for securing
bulkheads, stop ends, and column configurations.
Harris 1500™
Standard Panel Weighs Only 6.8
Pounds Per Square Foot!Increases Job Site
Flexibility!
3 4For more information about Harris 1500™ products, call us at: (860) 665-9494
Plywood Joint Caulked
Flush MountTie SleevePlywood Panel Design
The Harris 1500 panel design is as innovative as it is
effective. Custom designed to fit the 1500 system, these
panels have the durability to withstand many applications.
Plywood Panel Construction• The 9 ply birch form face provides exceptionally
smooth concrete finish.
• Each panel is edge sealed and the frame joint
is hot caulk finished to ensure a long service life.
• Panels have 220 / 220 finish phenolic saturated film.
• Provides superior concrete finish.
Available Panel Heights36 different panel sizes!
8’9’
6’5’
4’3’
With 36 different options, the only limitation is the
imagination of the architect. Harris 1500 panels
are constructed in the United States.
The Harris 1500™ Clamp System is designed
for consistent horizontal cross member
orientation. The cross members are
consistently horizontal, which makes
climbing the form safe and easy. The
practice of consistent cross member
orientation significantly reduces
labor because clamp, tie and
accessory locations are consistent.
5 6For more information about Harris 1500™ products, call us at: (860) 665-9494
Clamp draws panels flush by bearingon front and back of side rails.
Clamp aligns panel joint by seatingon the return of the side rail.
Harris 1500™ Standard ClampThe HARRIS 1500™ Clamp is innovative and effective. Our patented 3 point clamp
bearing design provides a well tensioned flush panel joint with only one hammer strike!
The standard clamp is used for nearly all applications.
3 Point Bearing• The front of the steel frame is tensioned.
• The back of the steel frame is tensioned.
• The ears of the clamp align the steel frame profile ensuring a flush panel joint.
Harris 1500™ Adjustable ClampThe HARRIS 1500™ Adjustable Clamp is used in applications where fillers up to 5” in width
are required. The adjustable clamp has all the features of the standard clamp, yet provides
the flexibility to meet all your challenging job site conditions.
ONEHammerSTRIKE
7 8For more information about Harris 1500™ products, call us at: (860) 665-9494
Harris 1500™ ClampThe HARRIS one hammer strike clamp is lightweight and very strong. Our patented
design effectively aligns and tensions the panel joints with only one swing of the
hammer. The lightweight clamps can easily be carried in your tool belt and are
installed in a snap! This easy to use clamp is one of the secret components of
this revolutionary labor savings system.
Harris 1500™ Flexible 90°The HARRIS 1500™ Inside Corner is designed to be
rugged and easy to use. The all steel construction
will stand up to years of job site use.
Imperial DimensionsOur inside corner is 12” x 12” and makes forming
corner applications a snap! The inside corner is
available in 6 different heights, 9’, 8’, 6’, 5’, 4’ & 3’.
Flexible 90° CornerThe flexible corner design allows for a
1° draft used to facilitate stripping. Our
integral “lock in bar” ensures a 90° corner
is maintained during concrete placement.
Once your concrete has sufficiently cured, simply
remove the “lock in bar” from the corner. The corner
instantly converts from a rigid corner to a flexible
corner. The specially designed corner allows your
formwork to draft 1° from the concrete face, making
stripping formwork simple and fast.
Harris 1500™ Hinge CornerThe HARRIS 1500™ Hinge Corner is designed to
withstand even the toughest job site conditions. Our
super duty hinge ensures that the corner remains
flexible for years of use. The hinge corner is available
in 6 different heights, 9’; 8’, 6’, 5’, 4’ & 3’.
The super duty piano hinge and all steel
construction provide the right support for
your hinge corner applications.
When used in conjunction with our Offset Hinge Waler
System, this corner becomes the strongest hinged
corner available! The hinge corner will accommodate
applications from 0° to 270°.
9 10For more information about Harris 1500™ products, call us at: (860) 665-9494
Harris 1500™ Pilaster CornerThe HARRIS 1500™ Pilaster Corner is designed to allow large area gangs to be
stripped and cycled between pilaster details often found on foundation walls.
When used in conjunction with the HARRIS Multi Purpose panel pilaster depths
from 8” to 38” can easily be accommodated. The HARRIS 1500 Pilaster Corner
system can easily achieve pilaster thicknesses of 36”.
Our integral “lock in bar” ensures a 90° corner is maintained during concrete
placement. Our 12” x 8” Pilaster Corner is manufactured with a super duty
hinge and is made entirely of steel.
The corner instantly converts from a rigid corner to a stripping corner. The
rounded corner edge allows for easy stripping, which provides proper relief
to cycle your formwork to the next placement.
Harris 1500™ Outside CornerThere are two ways to form 90° corners with the HARRIS
1500™ Clamp System. The HARRIS 1500 Outside Corner
is designed for 90° corner applications.
• All steel construction will stand up to years of job site use.
• Hot dipped galvanized to ensure long service life.
• Easily installed with the one strike hammer clamp.
The HARRIS Multi Purpose Panel is designed to be used
in 90° corner applications. The Multi Purpose Panel will
accommodate 2” to 22” thick corner details.
Set Position StrippedPosition
11 12
Harris 1500™ Walkway Bracket
The HARRIS 1500™ Walkway Bracket is designed with
a 30” deep work platform and a fast secure connect
guardrail post that is 42” high.
• 30” x 1 ½” Wood Strip For Nailing Plank.
• 42” tall guardrail post with steel supports for
lumber safety rail installation.
• Free floating toe board clip for fast and secure
installation of 2” x 6” lumber toe board.
• Quick connection to form regardless of rib orientation.
• Integrated security latch to prevent walkway bracket uplift.
• Integrated security latch to prevent guard rail uplift.
Guard Rail Post Detail
Guard Rail Post Detail
13 14For more information about Harris 1500™ products, call us at: (860) 665-9494
Harris 1500™ Climbing RodsThe HARRIS 1500™ panel is designed with climbing rods to
make accessing the formwork safe and productive. Consistent
horizontal rib orientation makes climbing the form easy, and
with tie off points every 3’ feet in height, safety is a built in
feature with the Harris 1500™ Clamp System!
• All 30” & 24” panels are fabricated with climbing rods.
• 8’ panel has 3 climbing rods.
• The climbing rods exceed OSHA standards.
Harris 1500™
Crane Clamp
Harris 1500™
Top Tie
Harris 1500™
Offset 36” Wale
Harris 1500™
Brace Bracket Connector
Harris 1500™ Is Made in the USA
The HARRIS 1500™ Clamp System is made by Americans for the American job site! Our team of
manufacturers employ state of the art roll forming equipment that is used to produce the patented
T Bolt Hat Section and Steel Frame Profile. In fact, we are the only supplier to the US market that
roll forms in the US! The roll form components are then set into precision jigs and welded by
computer guided robotic arms.
Our team of highly trained welding fabricators ensure that precision is maintained throughout the
robotic process. Once the welding process is complete, each component is measured and tested to
ensure the highest quality standards possible. After inspection the raw steel frame is completed,
it is then processed thru a series of preparation tanks before finally being submerged into
the in-house galvanizing tank. The hot dipped galvanized finish is guaranteed to provide a long
service life to the products. After the galvanizing procedure, the components are again inspected
to ensure that all tolerances are achieved. The galvanized frames are then moved to the carpentry
shop where the finished product is prepped and staged for shipment.
HARRIS 1500™ is simply the best handset clamp system available in the US! It is made with pride
and will proudly serve your job site!
Harris 1500™
Tie Down Bracket
Harris 1500™
MultiClaw
Harris 1500™
Hammer Head Bolt Assembly
Harris 1500™
Standard Tie Nut
Harris 1500™
AccessoriesThe Harris 1500 Clamp System is
designed to be the most economical
and versatile formwork system. This
innovative system is rounded out
with cutting edge accessories. The
accessories are designed to reduce
field labor and increase productivity.
In addition, there is a strong focus
on maintaining the highest safety
standards. With our full line of
accessories, you can rest assured
your next project will be a success!
15 16For more information about Harris 1500™ products, call us at: (860) 665-9494
Years of ServiceHarris has been serving the construction industry since 1916, providing innovation
solutions, quality products and professional services. Since 1950 Harris has been a
leading supplier of concrete formwork and shoring equipment. We offer a complete
line of vertical and horizontal formwork solutions for the entire construction industry.
Operations Group Harris has multiple state of the art distribution facilities dedicated to formwork and
shoring. These facilities are strategically located to service the major concrete markets in
the United States. Our state of the art cleaning and renovation facilities ensure that your
product is well maintained and ready for immediate use when it arrives on your job site.
Formwork & Shoring Sales Specialist Harris has hand picked the best solution based selling team in the industry! Our
Formwork and Shoring Sales Specialist will analyze your project, interview your
staff and develop a formwork solution that is economical, efficient and safe.
Field Service Group When your equipment arrives on site it will be greeted by a Field Service Specialist.
This team of formwork specialists are highly trained professionals that have years
of experience assembling and cycling concrete formwork and shoring. Our Field
Service Technician will work with your crew to ensure the economical, efficient
and safe handling of your formwork and shoring.
Formwork & Shoring Technical Group In conjunction with the Formwork and Shoring Sales Specialist, the Technical Group
will make sure the finer details of your project needs are addressed. Our erection
drawings are developed in AutoCAD 2010 and are subject to a strict protocol to
ensure that your design is economical, efficient and safe.
Customer Service Group Harris has a team of highly trained professionals that work to ensure that your orders
are invoiced properly and in a timely manner. Harris has state of the art invoicing
software, which makes reading rental invoices friendly and fast.
17 18For more information about Harris 1500™ products, call us at: (860) 665-9494