Africa’s leading steel supplier

INSTALLATION MANUALHARVEYTILE

Tel: +27 11 741 5600 I Fax: +27 11 813 3639 I www.harveyroofingproducts.co.za I www.macsteel.co.zaTel: +27 11 741 5

Africa’s leading steel supplier

PRODUCT RANGE

Tile Specification (Approx.)

Overall Length: 1675 mmCover: 1600 mmOverall Width: 397 mmCover: 369 mmMass per tile: 3,9 kgMass per sq. metre: 6,6 kgNo. of tiles per sq. metre: 1,69

Elitetile

Tile Specification (Approx.)

Overall Length: 1675 mmCover: 1600 mmOverall Width: 397 mmCover: 369 mmMass per tile: 3,9 kgMass per sq. metre: 6,6 kgNo. of tiles per sq. metre: 1,69

Tufftile

Tile Specification

Overall Length: 1675 mmCover: 1 625 mmOverall Width: 395 mmCover: 350 mmMass per tile: 4,2 kgMass per sq. metre: 6,9 kgNo. of tiles per sq. metre: 1,69

HarveyThatch & Shaketile

Africa’s leading steel supplier

INDEX

Africa’s leading steel supplier

TIMBER REQUIREMENTS

1

Africa’s leading steel supplier

TILING IN GENERAL

2

Africa’s leading steel supplier

GENERAL FIXING PROCEDURES

3

Africa’s leading steel supplier

RIDGE DETAILS

4

Africa’s leading steel supplier

FLASHING DETAILS

5

Africa’s leading steel supplier

GABLE END DETAILS

6

Africa’s leading steel supplier

VALLEY DETAILS MANSARD DETAILS

7

Africa’s leading steel supplier

HIP DETAILS

8

Africa’s leading steel supplier

ESTIMATING DATA

The following is based on standard information.All roofs vary so clients ust take special care whilst calculating quantities.

Tile Calculator for Sharktile and Thatch Tiles

Tile Calculator for Elite and Tuff Tiles

9

HIP DETAILS

Africa’s leading steel supplier10

Africa’s leading steel supplier

RE-ROOFING

11

Africa’s leading steel supplier12

COLOUR RANGE

Available on request. Minimum quantities are applicable

Left and right hand serrated. Fixed tobarge boards at gable ends. Sketchshows right handed barge board cover.

Length: 1550mm Height: 130mmcover 4 tile courses Mass: 2.3kg

Left and right handed serrated.Sketch shows right handed sidewall.

Length: 1550mm Height: 115mmcover 4 tile courses Mass: 2.4kgWidth: 170mm Upper Lip: 10mm

For use at headwall and sidewall flashingas well as for short courses at ridge.

Length: 1720mm Upper Lip: 25mmCover: 1600mm Mass: 2.5kgWidth: 240mm

Fixed to double batten at apexLength: 1720mm (cover 1600mm)Width: 125mm tapered lengthwiseHeight: 95mmMass: 2.5kg

Fixed to double batten at hip battensLength: 580mm (cover 1 per tile course)Width: 125mm tapered down to 123mmHeight: 75mm tapered up to 105mm

Fixed to double batten at apexLength: 1720mm (cover 1600mm)Width: 48mm tapered lengthwiseHeight: 70mmMass: 1.8kg

Fixed to single hip battenLength: 580mm (cover 1 per tile course)Width: 48mm tapered down to 45mmHeight: 42mm tapered up to 70mmMass: 0.5kg

Fixed to gable endsLength: 1720mm (cover 1600mm)Width: 60mmHeight: 68mm tapered upMass: 1.8kg

Length: 395mmWidth: 170mmMass: 0.6kgCover: 370mm

Africa’s leading steel supplier