(hastelloy c 276), uns 8020 (alloy 20 / 20 cb 3)...75 din609 hexagon fitted bolts,long thread 76...

Tel: +86-21-6090-0836/60900837 Fax: +86-21-6090-0838 http://www.klsteel.com Email: [email protected]

1 / 23


2 / 23

Metals International Limited is a worldwide leading company specializing in all kinds of fasteners and accessories.

We supply bolts,screws,nuts,rods and other some nonstandard fasteners under the different standards of

GB, ANSI, DIN, BS, JIS, AS and ISO, grade of 6.8, 8.8, 10.9, 12.9, B7, B7M, L7, L7M. Our producing

range: diameter: M12-M100; Length: 25-1200MM(Bolt) and 100-6000MM(Thread Rod).

Products have been passed ISO:9001~2000 Quality System Certificate. Main production equipment: two

sets heat treatment lines, three sets hot forged makers and 18 sets threading machine. Main testing

machine: 100 tons & 60tons tensile machine, charpy impact tester, crack detected machine, hardness

tester, torque tester and so on.

Steel Fasteners

Forms:

Stud Bolts

Hex Bolts

Square Bolts

Hex Nuts

T-Head Bolts

Friction Grip Bolts

Structural Bolts

U-Bolts

J-Bolts

Tie Bolts

Eye Bolts

Foundation Bolts

Bolt

Hex Head

Heavy Hex Head

Stud Bolt/Thread Rod

Flange Head

Round Head

Hex Socket

Eye & lifting

Nut

Screw

Anchor

Washer

Rivet & Rivet Nut

Pin

& Others as per drawing and customers specifications.


3 / 23

Carbon Steel, Stainless Steel, Nickel Alloy & Alloy Steel Fasteners

Standard: ASTM A193-B7, A193-B16, A194-2H, A194-8MA, A193-B7M , A320-L7, A194-2HM, A194-3,

A193-B8, A320L7M , A194-8 , A194-4，A193-B8M, A320 B8, A194-8A, A194-7

Grade: B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4,

Standard: ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472

Material : Alloy 904L, SMO254, Alloy 20, Sanicro 28, UNS 4400 (MONEL 400), UNS 8825 (INCONEL

825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276

(HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)

Material : Duplex 2205 UNS S32205 UNS S31803 ASTM A182 F51 F60, Duplex 329 ASTM A182 F52

Material : Super Duplex 2507 UNS S32750 ASTM A182 F53, UNS S32760 ASTM A182 F55 Din 1.4501

Material : 22CrMo4, 24CrMo4, 25CrMo4, 26CrMo4, 34CrMo4, 42CrMo4, 34CrNiMo6, 41CrNiMo6

Material : AISI 4130, SAE 4130, AISI 4140, SAE 4140, AISI 4145, SAE 4145, AISI 4340, SAE 4340

Material : EN 8, EN 9, EN 19, EN 24

Heat Treatments Condition : Annealing, Solution Annealing, Normalizing, Tempered, Quenched &

Tempered Black oxidizing, Phosphating, Nitriding

All the products the surface including:

Coating : Bright Zinc Plated, Hot Dip Galvanised, Phosphatided, Silver, Chromated, Nickel Plated

Coatings : Yellow Zinc Plating, Blue Zinc Plating, White Zinc Plating, Black Oxide

Coatings : Cadmium Plating - Silver, Cadmium Plating - Yellow, XYLAN / PTFE, Fluoropolymer

Treatments :

Now our products are widely distributed Southeast Asia, Europe, Middle East and so on.

our corporation is always dedicated to bring our customers the products with superior quality, which has

been welcomed by numerous fastener distributers around the world and benefits from our dedication in

the fabrication of fasteners, stringent quality control, custom services.


4 / 23

Specification/ Sizes/Class

Specification Size Class

GB 901 M16~M48

GB 798 M16~M48

GB 5783 M16~M48

GB 70 M16~M48

GB/T1228~1231 M16~M30 10.9S; 8.8S

GB/T3632~3633 M16~M24 10.9S

GB/T16939 M16~M64 10.9S; 9.8S

GB/T10433 Ø6~Ø22

GB/T5780~5786 M16~M48 4.8,8.8,10.9

GB/T6170~6173 M16~M48 6; 8; 10

ASTM A193/A193M 3/8"-3 1/2"/M12-M80 B7,B7M B16, B8, B8M

ASTM A194/A194M 3/8"-4"/M8-M100 2H,2HM,4,4L,7,7L, 7,7M,8,8M,

ASTM A307 1/2" 2 1/2" A; B; C

ASTM A320 1/2"~1 1/2" L7,L7M

ASTMA325 A490 1/2"~1 1/2" A325; A490

ASTMA325M A490M M16~M36 8S; 10S

ASTM A453 660A M16~M36

ASTM A563 1/2"~1 1/2" A; C; DH

ASTM A563M M16~M36 8S; 10S

ASTM A574 M16~M36

ASTM F436 M16~M36

ASTM F1852 1/2"~1 1/8" A325

DIN6914~6916 M16~M30 10.9

DIN931,933,DIN 934,DIN 936 M10-M100 8,10,12

ISO7412;4775; 7416 M10-M100 8.8; 10.9

ISO4014; 4017 M10-M100 8.8

JIS B 1186 M10-M100 F8T; F10T;F11T

JSS Ⅱ 09 M10-M100 S10T

BS4395 M10-M100 8.8; 10.9

AS1252 M10-M100 8.8

UNI 5587,5588 M10-M100

UNI 5931 M10-M100

UNI 5737 M10-M100

SAE J995 3/8"-1 1/2" 2,5,8,10,A563-A,A563-C,A563-DH


5 / 23

Specification Comparision

Item DIN-Standard Desciption in English ISO-Standard GB-Standard

1 DIN1 Taper pins ISO2339 GB117

2 DIN7 Parallel pins ISO2339 GB119-86

3 DIN84 Slotted cheese head screws ISO1207 GB65-85

4 DIN85 Slotted pan head screws ISO1580 GB67-85

5 DIN93 Tab washers GB854

6 DIN94 Split cooter pins ISO1234 GB91

7 DIN95 Slotted raised csk head wood screws GB101

8 DIN96 Slotted round head wood screws GB99

9 DIN97 Slotted countersunk head wood screws GB100

10 DIN125-A Plain washers ISO7089 GB97.1-85

11 DIN125-B Mediun washers ISO7090 GB97.2-85

12 DIN126 Plain washers ISO7091

13 DIN127-A Spring lock washers,tang ends GB7244

14 DIN127-B Spring lock washers,square ends GB93-87

15 DIN128-A Single coil spring lock washers GB7245-87

16 DIN137-A Curved spring washers

17 DIN137-B Wave spring washers GB955

18 DIN186 T-head blots with square neck GB37-88

19 DIN188 T-head bolts with double nip

20 DIN258 Taper pins with threaded end ISO8737

21 DIN261 T-head bolts

22 DIN315AF Wing nuts America form

23 DIN315DF Wing nuts germany form GB62-88

24 DIN316AF Wing screws America form

25 DIN317DF Wing screws germany form

26 DIN319 Ball knobs

27 DIN404 Slotted capstan screws GB832-88

28 DIN417 Slotted set srews with full dog point ISO7435 GB75-85

29 DIN427 Slotted set srews with chamfered end ISO2342 GB73-85

30 DIN431 Pip nuts with thread GB808-88

31 DIN432 External tap GB856-88

32 DIN433 Washers for cheese head screws ISO7092 GB848-95

33 DIN434 Square taper washers for U-section GB852-88

34 DIN435 Square taper washers for I-sections GB852-88

35 DIN436 Square washers

36 DIN438 Slotted set with cup point ISO7436 GB74-85

37 DIN439 Hexagon thin nuts ISO4035 GB6172-86

38 DIN439 Hexagon thin nuts ISO8675 GB6173-86

39 DIN440 Rounds washers for wood constructions ISO7094

40 DIN443 Sealing caps,push-in type

41 DIN444 Eye bolts form B GB798-88

42 DIN462 Internal tab washers

43 DIN463 Washers with two taps GB855-88

44 DIN464 Knurled thumb screws with collar GB834-88


6 / 23

45 DIN465 Slotted knurled thumb screws with collar

46 DIN466 Knurled thumb nuts with collar GB806-88

47 DIN467 Knurled thumb thin nuts GB807-88

48 DIN470 Sealing washers

49 DIN471 Retaining rings for shafts(external),circlips GB893-86

50 DIN472 Retaining rings for bores(internal),circlips GB893.86

51 DIN478 Square head bolts with collar

52 DIN479 Square head bolts with half dog point

53 DIN480 Square head bolts with collar,half dog point

54 DIN508 T-slot nuts ISO299

55 DIN525 Single end studs

56 DIN529 Masonry bolts GB799-88

57 DIN546 Slotted round nuts GB817-76

58 DIN547 Round nuts with drilled holes in one face GB815-88

59 DIN551 Slotted set screws with flat point ISO4776 GB73-85

60 DIN553 Slotted set screws with cone point ISO7434 GB71-85

61 DIN555 Hexagon nuts ISO4034

62 DIN557 Square nuts GB39-88

63 DIN558 Hexagon screws ISO4018

64 DIN561 Hexagon set screws with full dog point

65 DIN562 Square nuts without bevel(pressed nuts)

66 DIN571 Hexgon head wood screw GB102-86

67 DIN580 Lifting eye bolts ISO3266 GB825-76

68 DIN582 Lifting eye nuts

69 DIN601 Hexagon blots ISO4016

70 DIN603 Mushroom head square neck bolts(carriage

bolts)

ISO8677 GB14-88

71 DIN604 Flat countersunk nib bolts

72 DIN605 Flat countersunk long squareneck bolts

73 DIN607 Cup head nib bolts

74 DIN608 Flat countersunk short square neck bolts

75 DIN609 Hexagon fitted bolts,long thread

76 DIN610 Hexagon fitted bolts short thread

77 DIN653 Knurled thumb screws thin type GB835-88

78 DIN660 Round head rivets ISO1051 GB867-86

79 DIN661 Contersunk head rivets ISO1051 GB869-86

80 DIN662 Raised contersunk head rivets ISO1051

81 DIN674 Mushroom head rivets ISO1051

82 DIN703 Adjusting rings,heavy range(shafting

collars)

83 DIN705 Adjusting rings,light range(shafting collars) GB816-88

84 DIN741 Wire rope clips

85 DIN787 T-slot screws ISO299

86 DIN835 Studs-metal(end=2d) GB900-88

87 DIN906 Hexagon socket pipe plugs,conical thread

88 DIN908 Thread

89 DIN909 Thread


7 / 23

90 DIN910 Hexagon head screw plugs,cyl.thread

91 DIN911 Socket wrenches ISO2936

92 DIN912 Hexagon socket cap screws ISO4762 GB70-85

93 DIN913 Hexagon socket set screws with falt point ISO4026 GB77-85

94 DIN914 Hexagon socket set screws with cone point ISO4027 GB78-85

95 DIN915 Hexagon socket set screws with dog point ISO4028 GB79-85

96 DIN916 Hexagon socket set screws with cup point ISO4029 GB80-85

97 DIN917 Hexagon cap nuts

98 DIN920 Slotted short cheese head screws

99 DIN921 Slotted large cheese head screws GB838-88

100 DIN923 Slotted pan head screw with shoulder GB830-88

101 DIN927 Slotted shoulder screws

102 DIN928 Square weld nuts GB/T13680-92

103 DIN929 Hexagon weld nuts GB/T13681-92

104 DIN931 Hexagon head screws ISO4014 GB5782-86

105 DIN933 Hexagon head screws ISO4017 GB5783-86

106 DIN934 Hexagon full nuts ISO4032 GB6170-86

107 DIN934 Hexagon full nuts ISO8673 GB6171-86

108 DIN935 Hexagon slotted and castle nuts ISO7035 GB6178-86

109 DIN936 Hexagon thin nuts ISO4035 GB6172.1-86

110 DIN937 Hexagon thin slotted and caslte nuts ISO7038 GB6181-86

111 DIN938 Studs metal(end=1d) GB897-88

112 DIN939 Studs metal(end=1.25d) GB898-88

113 DIN940 Studs metal(end=1.5d)

114 DIN960 Hexagon head bolts,metric fine pitch thread ISO8765 GB5785-86

115 DIN961 Hexagon head bolts,metric fine pitch thread ISO8676 GB8786-86

116 DIN962 Additional shapes and versions for bolts

117 DIN963 Slotted countersund head screws ISO2009 GB68-85

118 DIN964 Slotted raised countersunk oval head screws ISO2010 GB69-85

119 DIN965 Cross recessed countersunk head screws ISO7046 GB819-85

120 DIN966 Cross recessed raised Countersunk head

screws

ISO7047 GB820-85

121 DIN970 Hexagon nuts type-1

122 DIN971 Hexagon nuts type-2

123 DIN972 Hexagon nuts with fine thread

124 DIN975 Threaded rods(studdings) ISO8674 GB6176-86

125 DIN976 Threaded pins(stud bolts) GB15389-94

126 DIN979 Hexagon thin slotted and castle nuts

127 DIN980 Prevaillng rorque type hexagon nuts,all metal nuts

128 DIN981 Locknuts ISO7199 GB6184-86

129 DIN982 Prevailing rorque type hexagon nuts,heavy

type,with nylon

ISO2982 GB812-88

130 DIN985 Prevalling torque type hoxagon nuts,heavy

type,with nylon

ISO7040 GB889.1-86

131 DIN986 Preailling torque typedomed capnuts with

nylon insert

ISO10511 GB6172.2-86

132 DIN988 Shim rings

133 DIN1052 Washers for timber connectors


8 / 23

134 DIN1151 Round plain head nails

135 DIN1440 Plain washers for clevis pins(A型) ISO8738

136 DIN1441 Plain washers for clevis pins

137 DIN1444 Clevis pins with head ISO2341 138 DIN1471 Grooved pins,taper grooved ISO8744 GB/T13829.2

139 DIN1472 Grooved pins,taper grooved half length ISO8745 GB/T13829.2

140 DIN1473 Grooved pins,parallel grooved full length ISO8740 141 DIN1474 Grooved pins,reverve grooved half length ISO8741 142 DIN1475 Grooved pins,center grooved ISO8742 143 DIN1476 Grooved pins with round head ISO8746 144 DIN1477 Grooved pins with countersunk head ISO8747 145 DIN1479 Turnuckles(center parts),made out of

hexagon bar

146 DIN1480 Turnuckles with eye bolt and hook bolt 147 DIN1481 Spring pins,heavy type ISO8752 GB879-86

148 DIN1587 Hexagon domed cap nuts GB802-88

149 DIN1804 Slotted round nuts for hook spammer 150 DIN1816 Round nuts with set holes 151 DIN2093 Disc springs 152 DIN3017 Hose clamps 153 DIN3404 Lubricating nipples,button head 154 DIN3567 Shackles for conduilts 155 DIN3570 Stirrup bolts(U-bolts) 156 DIN6319 Spherical washers,conical seats GB849-88

157 DIN6325 Parallel pins ISO8734 158 DIN6330 Hexagon nuts,1.5d GB56-88

159 DIN6331 Hexagon nuts,1.5d with collar GB6177-86

160 DIN6334 Hexagon nuts,3d 161 DIN6797-A External teeth lock washers GB862.1-87

162 DIN6797-I Internal teeth lock washers GB861.1-87

163 DIN6798-A External teeth serrated lock washers GB862.2-87

164 DIN6798-I Internal teeth serrated lock washers GB861.2-87

165 DIN6799 Retaining rings for shafts(E-rings),circlips GB896-76

166 DIN6885 Parallel keys(form A) ISO773/2491 167 DIN6888 Woodruff keys ISO3912 168 DIN6899 Thimbles 169 DIN6900 Screws and washers assemblies

170 DIN6901 Tapping screws and washer assemblies GB9074.1-17

171 DIN6912 Hexagon cocket head cap screws with

hole,low head GB9074.18-23

172 DIN6914 Hexagon head bolts with large head

(friction grip nolts)

173 DIN6915 Hexagon nuts with large wideth across flat(friction grip nuts)

174 DIN6916 Round washers for friction grip bolts

175 DIN6917 Spuare taper washers for friction grip bolts on T-

176 DIN6923 Hexagon flange nuts ISO4161 GB6187-86

177 DIN6925 Prevailing torque type hexagon nuts,all ISO7042 GB6185.1-2000


9 / 23

metallic nuts

181 DIN7346 Spring pins,light type ISO13337

182 DIN7349 Washers for bolts with heavy type spring

pinss

183 DIN7500 Thread forming screws for ISO-metric

thread

184 DIN7504 Self-drilling tapping screws

185 DIN7513 Thread cutting screws

186 DIN7516 Thread cutting screws cross recess

187 DIN7965 Tee nuts with pronge

188 DIN7968 Hexagon head fitted bolts for steel

structures GB1228/1229/1230

189 DIN7971 Pan head tapping screws with slot ISO1481 GB5282-85

190 DIN7972 countersunk flat head tapping screws with

slot

ISO1482 GB5283-85

191 DIN7973 Raised sountersunk oval head tapping

screws with slot

ISO1483 GB5284-85

192 DIN7976 Hexagon tapping screws ISO1479 GB5285-85

193 DIN7980 Spring lock washers for screws with

cylindrical heads

ISO8738

194 DIN7981 Pan head tapping screws with cross recessed ISO7049 GB845-85

195 DIN7982 Countersunk flat head tapping screws with

cross recessed

ISO7050 GB846-85

196 DIN7983 Raised countersunk oval head tapping

screws with cross

ISO7051 GB847-86

197 DIN7984 Hexagon socket head cap screws

with,reduced head

198 DIN7985 Pan head screws with cross recessed ISO7045 GB818-85

199 DIN7989 Washers for steel structures GB1230-84

200 DIN7990 Hexagon head bolts for steel structures GB1229-84

201 DIN7991 Hexagon socket coutersunk head screws ISO10642

202 DIN7993 Roundwire snap rings for shafts GB895.2-86

203 DIN7995 Cross recessed raised countersunk head

wood screws GB952-86

204 DIN7996 Cross recessed round head wood screws GB950-86

205 DIN7997 Cross recessed countersunk head wood

screws GB951-86

206 DIN8140 Ciol inserts,coarse,fine thread,silf locking

207 DIN9021 Washers,outside diameter appro.3d ISO7093 GB96-85

208 DIN11024 sping cotter for a bolt 209 DIN13257 Belting bolts 210 DIN18182 Dry wall screws 211 DIN28129 Lifting nuts(eye nuts) GB63-88

212 DIN70952 Tab washer for slotted round nuts GB/858-88


10 / 23

Stirrup bolts(U-hook)

http://tjxhh.com/ProductView.asp?ID=345



11 / 23

U-bolt

Stirrup bolts(U-hook)

Masonry bolts 3







12 / 23

Masonry bolts

Galvanized Nuts






13 / 23

High-strength bolts

Fastening bolts





14 / 23

Bolt 2

Bolt full map






15 / 23

Carriage bolt

Hexagon bolt






16 / 23

Expansion bolt

Flat head bolt






17 / 23

Studs

Stainless steel screws





18 / 23

Screw chain

Tapping screws






19 / 23

Drilling Wire

Locknut






20 / 23

CAP NUT

Nut 2






21 / 23

Nut 3

Play mat






22 / 23

Washers

Gasket






23 / 23

Flower bar

Pins





(hastelloy c 276), uns 8020 (alloy 20 / 20 cb 3)...75 din609 hexagon fitted bolts,long thread 76...

Documents