hazet socket data

Sockets and Socket Sets HINOX-Tools

Ingenious Tools

844 849

HAZET

Stainless Steel Toolstools is up to 30 % higher tools

SAFETY HIGH-QUALITY ENVIRONMENTAL COMPATIBILITYThe static charge (peak load) of the in comparison to competitive products

The dynamic charge (permanent load) of the is up to 3 times higher longer service life All tools are without surface coating no allergic reactions due to chemical coatings

Safety-InsertSystem a missing tool is noticed immediately

4

Tools made of solid stainless material. All components, e.g. of the reversible ratchet are made of 100% stainless steel: ratchet housing, ratchet wheel, pawl, cover plates, screws, ball (just the shift lever and the handle are made of plastic). Stainless steel prevents formation of rust!That means: Only the continuous application of tool, screw, washer, component and nut made of stainless steel ensures a safe rust-proof connection avoids additional costs or subsequent damage!

What is rust from external sources and when does it occur? Rust from external sources results from use of tools made of standard steel with stainless steel screws or other stainless steel components. Frequent application leads to abrasion on steel tools. If these standard steel tools are used with stainless steel components, metal wear debris remain on the screwed connection. Wear debris and oxygen result in RUST!

PERMANENT LOAD VALUESHAZET Screwdrivres Socket:0 1 Conventional Screwdriver Socket HAZET Screwdriver Socket approx. 2 3

STATIC TORQUEHAZET Reversible Ratchet:0% 50% 100% 130% Conventional Reversible Ratchet

For high-end application in: Industry Laboratories Aircraft sector Automotive sector Naval construction / shipyards / nautical sector In segments of the food industry and medical engineering

3 times higher

HAZET Reversible Ratchet

approx.

+ 30 %

Components and Spare Parts see pages 240 to 249

79

Ingenious Tools

Sockets and Socket Sets HINOX-ToolsReversible Ratchet HINOX Extension HINOX

6-Point Socket HINOX

$ i drive 6.3 = 14 Ratchet wheel 20 teeth High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant - for outdoor use 2-component handle for more security

/ i j drive 6.3 = 14 High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use

4

Safety: Up to 20% higher torque values (static charge) in the range of HINOX-tools Having the same hardness, high-grade stainless steel provides better mechanical strength properties than the standard material (31 CrV 3) Safer application / reduction of the risk of injury High quality: Service life up to three times higher as measured in a continuous load test Environmental friendliness: Environmentally friendly fabrication without surface coating No allergic reactions due to chemical coatings Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use

1868 X

K147

4121359

Universal Joint HINOX

1863 X

K115

4121335

Repair Set Ratchet Wheel HINOX 6.3 = 14 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 863 X

863 X/7

132997

Sliding T-Handle

HINOX

1850 X- 4 850 X- 4,5 850 X- 5 850 X- 5,5 850 X- 6 850 X- 7 850 X- 8 850 X- 9 850 X-10 850 X-11 850 X-12 850 X-13 850 X-14

K25 25 25 25 25 25 25 25 25 25 25 25 25

G6,8 7 8 8,5 9 10,5 11,5 13 14 15,5 17 18 19,5

H11 11 11 11 11 11,5 12,5 11,5 12,5 14 15 15 16

c 43,7 4,2 4,1 4,6 5,1 5,6 6,3 7,3 7,3 8,3 9,3 9,3 10,8 121380 121397 121403 121410 121427 121533 121540 121557 121564 121571 121588 121595 121601

i j drive 6.3 = 14 Enables getting over obstacles and troublesome borders High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use

1 i drive 6.3 = 14 High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use

K36,5

4121373

869 X

Socket Set (6-Point) HINOX

1865 X

K115

4121342

/6

Screwdriver Socket HINOX

Spin Type Speeder HINOX

j drive 6.3 = 14 For inside hexagon screws With knurling For manual operation High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant - for outdoor use

18501 X-3 8501 X-4 8501 X-5 8501 X-6 8501 X-8

F12 12 12 12 12

M6,5 6,5 6,5 6,5 6,5

N28 28 28 28 28

4121618 121625 121632 121649 121656

i drive 6.3 = 14 TRInamicULTRA handle Haptic elements provide a better grip Anti-slipping even with oily hands High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use

187 x 125 x 39 mm j drive 6.3 = Safety: Up to 20% higher torque values (static charge) in the range of HINOX -tools Having the same hardness, high-grade stainless steel provides better mechanical strength properties than the standard material (31 CrV 3) Safer application / reduction of the risk of injury High quality: Service life up to three times higher as measured in a continuous load test Environmental friendliness: Environmentally friendly fabrication without surface coating No allergic reactions due to chemical coatings Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use In plastic case PUR foam inserts all tools are snugly embedded 24 pieces Contents: 850 X-4 4,5 5 5,5 6 7 8 9 10 11 12 13 14 8501 X-3 4 5 6 8 863 X 865 X 866 X 867 X-2 868 X 869 X14

1866 X

K134

4121663

Extension HINOX

i j drive 6.3 = 14 High-grade stainless steel Considerably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant - for outdoor use

1867 X-2

K55

4121366

1854 X

4121120

80


Sockets and Socket Sets 1Ingenious Tools

850 8501

HAZET Range ofReversible Ratchets with Hinge Joint

1 SocketsFine Tooth Reversible Ratchet

Fine Tooth Reversible Ratchets Reversible Ratchets with T-Handle

Komposit Reversible Ratchets Sockets Screwdriver Sockets Extensions and many more. Reversible Ratchet with T-Handle

Actuation angle 5, 72 teeth

The Classic Reversible Ratchet

2-component handle providing a better grip

Sockets 1

4

The advantages of a T-handle and a reversible ratchet combined in one tool

Tools made of high-grade stainless steel

Long style

With universal joint

: Tools made of solid stainless material. All components, e.g. of the reversible ratchet are made of 100% stainless steel: ratchet housing, ratchet wheel, pawl, cover plates, screws, ball (just the shift lever and the handle are made of plastic).


81


6-Point Socket

6-Point Socket

$

C

$K G50 50 50 50 50 50 50 50 50 50 50 6,7 7,9 8,5 9,2 11,0 12,0 13,0 14,5 15,5 17,0 18,0

Universal Joint Socket (12-Point)

1850 Lg- 4 850 Lg- 5 850 Lg- 5,5 850 Lg- 6 850 Lg- 7 850 Lg- 8 850 Lg- 9 850 Lg-10 850 Lg-11 850 Lg-12 850 Lg-13

H f 411,0 4,0 037643 11,0 4,2 037650 11,0 5 037667 11,0 5,5 037674 11,0 6 037681 12,0 8 037698 13,0 8 037704 14,5 9,2 037599 15,5 10,7 037605 17,0 12,2 037612 18,0 12,2 037629

j drive 6.3 = 14 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

1

K25 25 25 25 25 25 25 25 25 25 25 25 25 25

G6,2 6,8 7,4 8,1 8,7 9,3 10,9 12,1 13,4 14,6 15,5 17,0 18,0 19,5

H11,0 11,0 11,0 11,0 11,0 11,0 11,5 12,5 12,5 12,5 14,0 15,0 15,0 16,0

c3,2 3,7 4,2 4,1 4,6 5,1 5,5 6,5 7,5 7,3 8,3 9,3 9,3 10,8

4057221 036370 036387 036400 036417 036479 036516 036547 036585 036202 036240 036271 036301 036349

4

850- 3 850- 4 850- 4,5 850- 5 850- 5,5 850- 6 850- 7 850- 8 850- 9 850-10 850-11 850-12 850-13 850-14

12-Point Socket

With universal joint For areas with restricted access j drive 6.3 = 14 Chrome-Vanadium Surface chrome-plated, polished

Y% 1

K35 35 35 36 36 38 38 40 42

G10 11 12 13,5 13,8 15 16,6 18,9 18,9

H13 13 13 13 13 13 13 13 13

c 45,5 6,1 6,5 7,5 7 7 7,3 7,2 9,2 121106 121144 121151 121168 121281 121274 121267 121250 121243

American sizes j drive 6.3 = 14 With Traction profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

850 GZ- 6 850 GZ- 7 850 GZ- 8 850 GZ- 9 850 GZ-10 850 GZ-11 850 GZ-12 850 GZ-13 850 GZ-14

Universal Joint Socket Set (12-Point)

1850 AZ-316 850 AZ-7 32 850 AZ-14 850 AZ-932 850 AZ-516 850 AZ-1132 850 AZ-38 850 AZ-716 850 AZ-12 850 AZ-916

K25 25 25 25 25 25 25 25 25 25

G7,4 8,7 9,3 10,9 12,0 13,4 14,5 15,5 17,6 19,5

H

c 4078462 078479 078486 092833 078516 078523 078530 078547 078554 078561

American sizes j drive 6.3 = 14 With Traction profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

11 4,2 11 4,7 11 5,1 11,5 5,5 12,5 6,5 11,5 7,5 12,5 7,4 14 8,3 15 9,3 16 10,7

9 pieces In plastic drawer insert

(2/12)

1850 A-316 850 A-7 32 850 A-14 850 A-932 850 A-516 850 A-1132 850 A-38 850 A-716 850 A-12 850 A-916

K25 25 25 25 25 25 25 25 25 25

G8,0 8,5 9,5 10,5 11,5 13,0 14,0 15,5 18,0 19,5

H

c

4037490 037537 037476 037551 037513 037483 037506 037520 037469 037544

11,0 4,2 11,0 4,6 11,0 5,1 11,5 5,6 12,5 6,3 11,5 7,3 12,5 7,3 14,0 8,3 15,0 9,3 16,0 10,8

Y% 1

Contents: 850 GZ-6 7 8 9 10 11 12 13 14

4125265

850 GZ/9

h Socket

$

Long style American sizes j drive 6.3 = 14 With Traction profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

1 Long style j drive 6.3 = 14 With Traction profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

K G50 50 50 50 50 50 50 50 50 50 7,4 8,7 9,3 10,8 11,4 13 14,2 15,5 17,5 19,3

H11 11 11 11 11,6 13 14,2 15,5 17,5 19,3

c 44,7 5,2 5,6 6,1 8 8 9,46 10,9 12,4 15,2 078578 078585 078592 078608 078615 078622 078639 078646 078653 078660

B

850 850 TAZ-7 32 850 TAZ-14 850 TAZ-932 850 TAZ-516 850 TAZ-1132 850 TAZ-38 850 TAZ-716 850 TAZ-12 850 TAZ-916

TAZ-316

j drive 6.3 = 14 For outside TORX screws With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

1

r

K

G

H

4

850-E 4 3,86 850-E 5 4,75 850-E 6 5,74 850-E 7 6,22 850-E 8 7,52 850-E 10 9,42 850-E 11 10,08

25 5,6 11,0 036653 25 6,7 11,0 036684 25 8,0 11,0 036714 25 9,6 11,0 036745 25 10,5 11,5 036776 25 13,0 12,0 036615 25 14,0 12,5 036646

82



850 8508

h Universal Joint Socket

h Screwdriver Socket

Adapter

With universal joint For areas with restricted access j drive 6.3 = 14 For outside TORX screws With knurling For manual operation Chrome-Vanadium Surface chrome plated, polished

j drive 6.3 = 14 For inside TORX screws With knurling For manual operation Chrome-Vanadium Surface CVD Titanium Nitride (TIN) coated

j drive 6.3 = 14 i drive 10 = 38 Chrome-Vanadium Surface chrome-plated DIN 3123, ISO 3316

18502-T 8 8502-T 9 8502-T 10 8502-T 15 8502-T 20 8502-T 25 8502-T 27 8502-T 30 8502-T 40

r2,31 2,50 2,74 3,27 3,86 4,43 4,99 5,52 6,65

M3,5 3,5 3,8 4,0 4,0 4,5 4,5 5,0 2,0

N28 28 28 28 28 28 28 28 28

F 412 12 12 12 12 12 12 12 12 037124 037148 036967 036981 037001 037025 037049 037063 037100

1858-1

K26,5

4038480

Impact Adapter

1850 G-E 6 850 G-E 7 850 G-E 8 850 G-E 10

r5,74 6,22 7,52 9,42

K33 34 34 35

G8 9 10,5 13

H 413 13 13 13 120574 120857 120864 120871

Screwdriver Socket h Universal Joint Socket Set j drive 6.3 = 14 For slotted screws With knurling For manual operation Chrome-Vanadium Surface CVD Titanium Nitride (TIN) coated

i drive 6.3 = 14 (DIN 3121) g A 5.5 DIN 3126, form A For impact sockets with j drive 6.3 = 14 For power screwdrivers e.g. AEG, Bosch, Holz-Her, Metabo

18508 S-1

K50

4037391

4

1 4 pieces, cardboard packed Suitable for empty compartment of tool set 850 GZ/9 Contents: 850 G-E 6 E 7 E 8 E 10

M16 16 16 16 16

N28 28 28 28 28

F12 12 12 12 12

4037162 037186 037247 037209 037223 i drive 6.3 = 14 (DIN 3121) g E 6.3 DIN 3126, form E (14) For power screwdrivers, e.g. AEG, Atlas-Copco, Black & Decker, Bosch

8503-0,6 x 3,5 8503-0,8 x 4 8503-1 x 5,5 8503-1,2 x 8 8503-1,6 x 10

1850 G-E/4

4125166

18508 S-3 8508 S-4 j drive 6.3 = 14 For Phillips-Recess screws PH With knurling For manual operation Chrome-Vanadium Surface CVD Titanium Nitride (TIN) coated

K50 100

4037414 037421

Screwdriver Socket

Fine-Tooth Reversible Ratchet

j drive 6.3 = 14 For inside hexagon screws With knurling For manual operation Chrome-Vanadium Surface CVD Titanium Nitride (TIN) coated for Improved endurance Higher torque values Corrosion-resistant Minimization of cam-out effect (better screw grip) DIN 7422 8501-2,5 esp. for screwing the headliner and cape hood bracing wires, microswitches, soft top frames BMW E 38 Convertible, 3-series Convertible

18506-PH 1 8506-PH 2 8506-PH 3 8506-PH 4

M16 16 16 16

N28 28 28 28

F12 12 12 12

4037285 037308 037322 037346

18501-2,5 8501-3 8501-4 8501-5 8501-6 8501-8

M6,5 6,5 6,5 6,5 6,5 6,5

N28 28 28 28 28 28

F12 12 12 12 12 12

4036837 036851 036875 036899 036912 036936

j drive 6.3 = 14 For Pozidriv screws PZ With knurling For manual operation Chrome-Vanadium Surface CVD Titanium Nitride (TIN) coated

18507-PZ 1 8507-PZ 2 8507-PZ 3

M16 16 16

N28 28 28

F12 12 12

4037360 037377 037384

i drive 6.3 = 14 72 teeth, actuation angle 5, enable working in areas with restricted access One-hand operation 2-component handle for more security Chrome-Vanadium Surface chrome-plated

1863 F

K115

4061471


83


Reversible Ratchet

Komposit Reversible Ratchet

Repair SetC

/ i drive 6.3 = 14 Ratchet wheel 20 teeth 2-component handle for more security Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

/ 1 i drive 6.3 = 14 With locking device and quick-release press-button Change-over switch on the handle enables onehand operation Components are easily replaceable due to Komposit construction Shock resistant plastic body Ergonomic design Smooth-running ratchet wheel (20 teeth) Safe locking of the sockets By pressing the button, attached tools are easily released with just one hand Chrome-Vanadium Cover plates made of chrome-plated steel DIN 3122, ISO 3315

4

Repair Set for ratchet wheel 6.3 = 14 i consisting of: ratchet wheel with quick-release press-button, pawl, cap screws, 1 holding down bolt each (small and large), for 863 N

863 N/6

038541

1863 P

K115

4038558

Repair Set for ratchet wheel 6.3 = 14 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 863 Q, 863 S

863 S/7

048472

/

Flexible Handle

/ i drive 6.3 = 14 Chrome-Vanadium Surface mat chrome-plated DIN 3122, ISO 3315

4

1863 N i drive 6.3 = 14 With locking device and quick-release press-button Ratchet wheel 20 teeth Safe locking of the sockets By pressing the button, attached tools are easily released with just one hand 2-component handle for more security Chrome-Vanadium Surface chrome-plated, heads polished

K122

4038527

Reversible Ratchet with T-Handle

1

K143

4038688

/

864

Sliding T-Handle

1863 S

K115

4038626

i drive 6.3 = 14 Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

/ i drive 6.3 = Curved design for working in areas with restricted access Ratchet wheel 20 teeth 2-component handle for more security Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 331514

i drive 6.3 = 14 Tool combines the advantages of a T-handle and a reversible ratchet Enables either powerful or sensitive working With quick-release press-button Optimal working with Extension HAZET 868 DIN 3122, ISO 3315

1865

K115

4038718

Spin Type Speeder

1863 Q

4063482

1863 PC

K115

4038602

Repair Set

i drive 6.3 = 14 TRInamicULTRA handle Better application of force due to haptic elements of the handle Non-slipping even with greasy hands Chrome-Vanadium Surface mat chrome-plated DIN 3122, ISO 3315

/1 i drive 6.3 = 14 With hinge joint for working in areas with restricted access Ratchet wheel 20 teeth 2-component handle for more safety Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

1866 U

K134

4056453

Extension 4

Repair Set for shift lever consisting of: shift lever, pawl, screws, ball, compression spring for 863, 863 G, 863 P, 863 PC, 863 Q, 863 S, 863 ST, 2264

863 P/6

144600

1863 G

K135

4038497

Repair Set for ratchet wheel 6.3 = 14 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 863 G, 863 P, 863 PC, 863 ST

i j drive 6.3 = 14 Chrome-Vanadium Surface chrome-plated, polished DIN 3123, ISO 3316

1B

K25 55 101,5

4038732 038749 038770

863 P/7 N

038596

867-1 867-2 867-4

84



850 871

Extension

Socket Rail

Socket Set (6-Point)

/6 i j drive 6.3 = 14 Chrome-Vanadium Surface chrome-plated, polished DIN 3123, ISO 3316

1868 868-16

K147 402

4038794 076727 j drive 6.3 = 14 In plastic box With PUR foam insert all tools are snugly embedded 14 pieces i drive 6.3 = 14 Easy installation: 2 bore holes, e.g. for wall fixation Holding clamps adapted to the drive size Clear arrangement on rail keeps sockets always ready to hand Made of metal Contents: 850-4 4,5 5 5,5 6 7 8 9 10 11 865 866 U 867-2 868

Universal Joint

1850

4036189

i j drive 6.3 = 14 Enables getting over obstacles and troublesome borders Chrome-Vanadium Surface chrome-plated DIN 3123, ISO 3316

14038824 850/10 H

K

4

10 pcs. 6-point sockets Contents: 850-4 5 6 7 8 9 10 11 12 13

/6

1869

K36,5

430

051748

10 pcs. 6-point sockets, long style Contents: 850 Lg-4 5 6 7 8 9 10 11 12 13

4

Flexible Extension

850 Lg/10 H

430

051786

Empty, with 16 clips suitable for Sockets 850

850 HL

430

037575 j drive 6.3 = 14 In plastic box With PUR foam insert all tools are snugly embedded 14 pieces Contents: 850-4 4,5 5 5,5 6 7 8 9 10 11 863 P 867-2 868 869

Magnetic Socket Rail, empty i drive 6.3 = 14 Flexible shaft enables getting over obstacles and troublesome borders and fast working even in areas with restricted access Chrome-Vanadium

1870

K150

4038848

1850-1

4036196

With handle esp. for worm drive hose clips in fuel lines and coolant hoses, etc.

h Socket Set

870-2

130

050536

Wobble Extension

/6 N e

i j drive 6.3 = 14 With ball shaped, conical outside square, allows 8 angular movement to every side By attaching a socket until its limit stop is reached, the wobble extension may also be used as rigid extension Flexible shaft enables getting over obstacles and troublesome borders in areas with restricted access Chrome-Vanadium Surface chrome-plated, polished

1871-1 871-4

K25 101,5

4038855 038879

13 exchangeable holding squares well-suited to the drive size (j 6.3 = 14) With magnetic back for fixation on e.g. tool trolley or in tool trolleys drawers (exactly fitting into drawers of HAZET tool trolley Assistent) Safe fixation of the sockets due to special locking system (ball clamping) in the holding square. Locking release by turning the socket by 90. Clear arrangement sockets are always ready to hand Rail made of metal, clips made of plastic

j drive 6.3 = 14 With Reversible Ratchet with T-Handle In plastic box With PUR foam insert all tools are snugly embedded 20 pieces Contents: 850-E 4 E 5 E 6 E 7 E 8 E 10 E 11 8502-T 8 T 9 T 10 T 15 T 20 T 25 T 27 T 30 T 40 863 Q 868 871-4 869

1850 MH L

K342

4120635

1850 TQ

4072033


85





/6

/6

/6

167 x 67 x 37 mm

187 x 126 x 39 mm

187 x 126 x 39 mm

4

j drive 6.3 = 14 In plastic box With PUR foam insert all tools are snugly embedded 14 pieces Contents: 850-5 5,5 6 7 8 9 10 11 12 13 863 P 867-2 868 869

j drive 6.3 = 14 In plastic box With PUR foam insert all tools are snugly embedded 20 pieces Contents: 850- 4 4,5 5 5,5 6 7 8 9 10 11 12 13 14 863 P 864 865 866 U 867-2

j drive 6.3 = 14 Screwdriver sockets CVD-Titanium Nitride (TIN) coated In plastic box With PUR foam insert all tools are snugly embedded 33 pieces Contents: 850-4 5 6 7 8 9 10 11 12 13 14 8501-3 4 5 6 8 8503-0,6 x 3,5 0,8 x 4 1 x 5,5 1,2 x 8 8506-PH 1 PH 2 PH 3 PH 4 8507-PZ 1 PZ 2 PZ 3 863 P 865 866 U 867-2 868 869

868

869

1851

4038176

1852-1

4038220

1854-1

4038343




/6

/6

/6

187 x 125 x 39 mm

187 x 125 x 39 mm

187 x 125 x 39 mm

j drive 6.3 = 14 In plastic box With PUR foam insert all tools are snugly embedded 16 pieces Contents: 850-4 4,5 5 5,5 6 7 8 9 10 11 863 P 865 866 U 867-2 868 869

j drive 6.3 = 14 Screwdriver sockets CVD-Titanium Nitride (TIN) coated In plastic box With PUR foam insert all tools are snugly embedded 30 pieces Contents: 850-4 5 5,5 6 7 8 9 10 11 12 13 14 8501-3 4 5 6 8 8503-0,6 x 3,5 1 x 5,5 1,2 x 8 8506-PH 1 PH 2 8507-PZ 1 PZ 2 863 P 865 866 U 867-2 868 869

j drive 6.3 = 14 With fine-tooth reversible ratchet, 72 teeth Screwdriver sockets CVD-Titanium Nitride (TIN) coated In plastic box With PUR foam insert all tools are snugly embedded 30 pieces Contents: 850-4 5 5,5 6 7 8 9 10 11 12 13 14 8501-3 4 5 6 8 8503-0,6 x 3,5 1 x 5,5 1,2 x 8 8506-PH 1 PH 2 8507-PZ 1 PZ 2 863 F 865 866 U 867-2 868 869

1852 N

4038299

1854

4038336

1854 F

4061235

86



851 852

Socket Set

Socket Set


/6 N e K

/6 e N K

/6

344 x 188 x 56 mm 187 x 125 x 39 mm 187 x 125 x 39 mm

j drive 6.3 = 14 Screwdriver sockets, CVD-Titanium Nitride (TIN) coated In plastic box With PUR foam insert all tools are snugly embedded 33 pieces Contents: 850-5 5,5 6 7 8 9 10 11 12 13 14 850-E 5 E 6 E 7 E 8 E 10 8501-3 4 5 6 8502-T 10 T 15 T 20 T 25 T 30 8503-1x5,5 8506-PH 2 863 P 871-4 866 U 867-2 868 869

j drive 6.3 = 14 Long and short style sockets In plastic box In 2-coloured soft foam insert all tools are snugly embedded Safety-Insert-System a missing tool is noticed immediately 40 pieces Contents: 850-4 4,5 5 6 7 8 9 10 11 12 13 850 Lg-5 6 7 8 9 10 11 12 13 850 E-5 6 7 8 10 8501-3 4 5 8502-T 10 T 15 T 20 T 25 T 30 8503-1 x 5,5 8506-PH 2 863 P 866 U 867-2 4 869

j drive 6.3 = 14 American sizes In plastic box With PUR foam insert all tools are snugly embedded 14 pieces Contents: 850 A-316 7 32 14 932 516 1132 38 716 863 P 865 866 U 867-2 868 869

44038275

1854 T

4109579

1855-1

4115983

1852 A N




/6

/6

/6

279 x 121 x 47 mm 167 x 97 x 37 mm

187 x 125 x 39 mm

j drive 6.3 = 14 With long style sockets In plastic box With PUR foam insert all tools are snugly embedded 13 pieces Contents: 850 Lg-4 5 5,5 6 7 8 9 10 11 12 13 863 G 867-4

j drive 6.3 = 14 American sizes In plastic box With PUR foam insert all tools are snugly embedded 14 pieces1132 38 716 12 916

j drive 6.3 = 14 American sizes In plastic box With PUR foam insert all tools are snugly embedded 17 pieces Contents: 850 A-316 7 32 14 932 516 863 P 864 865 866 U1132 38 716 12 867-2 868 916

Contents: 850 AZ-316 7 32 14 932 516 863 S 867-2 868 869

869

1855

4038442

1851 AZ

4084814

1852 A-1

4038251


87


HAZET Range ofFine-Tooth Reversible Ratchets Reversible Ratchets with Hinge Joint Komposit Reversible Ratchets Sockets Screwdriver Sockets

2 SocketsFine-Tooth Reversible RatchetActuation angle 5, 72 teeth

Komposit Reversible RatchetWith one-hand change-over switch on the handle

4

Extensions and many more.

Komposit-construction allows easy replacing of components

Reversible Ratchet

Long pattern With hinge joint

Screwdriver Sockets 2

Sockets 2

88



880 880

6-Point Socket

6-Point Socket

12-Point Socket

$

C Long style j drive 10 = 38 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1 + = with rubber ply for spark plugs

$

C

%K29,5 29,5 29,5 31,5 31,5 31,5 31,5 34,0

1880 Z-15 880 Z-16 880 Z-17 880 Z-18 880 Z-19 880 Z-20 880 Z-21 880 Z-22

G20,9 22,1 23,3 24,6 25,8 26,8 28,3 29,6

H18,0 18,0 18,5 19,0 19,5 20,0 22,5 23,5

c 411,7 11,7 11,7 13,5 13,5 13,5 13,0 15,5 041909 041916 041923 041930 041947 041954 041961 041978

j drive 10 = 38 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

1880 Lg- 7 880 Lg- 8 880 Lg- 9 880 Lg-10 880 Lg-11 880 Lg-12 880 Lg-13 880 Lg-14 880 Lg-15 880 Lg-16 880 Lg-17 880 Lg-18 880 Lg-19 880 Lg-20 880 Lg-20.8 1316 + 880 Lg-21 880 Lg-22

K G54 54 54 54 54 54 54 54 60 60 60 66 66 70 70 70 70 10,9 12,1 13,0 14,4 15,8 17,0 18,4 19,5 20,8 21,8 23,0 24,4 25,5 26,6 27,4 28,0 29,6

H17,0 17,0 17,0 17,0 17,2 18,5 18,5 19,5 19,5 18,5 18,5 20,0 20,0 21,0 21,0 22,0 21,0

c 47,0 7,0 10,0 10,0 11,0 11,0 12,0 15,0 15,0 16,0 16,0 20,0 20,0 22,0 16,5 22,0 22,0 052240 052257 040858 040698 040704 040711 040728 040759 040766 040773 040780 040797 040803 040810 040827 040834 040841

* = not according to DIN

1880- 6 * 880- 7 880- 8 880- 9 880-10 880-11 880-12 880-13 880-14 880-15 880-16 880-17 880-18 880-19 880-20 880-21 880-22

K24,0 24,0 24,0 24,0 25,0 26,0 27,0 27,5 29,5 29,5 29,5 29,5 31,5 31,5 31,5 31,5 34,0

G10,0 10,5 11,8 13,0 14,4 15,8 17,0 18,4 19,5 20,9 22,1 23,3 24,8 25,8 26,8 28,3 29,6

H17,0 17,0 17,0 17,0 17,0 17,5 18,5 17,0 17,5 18,0 18,0 18,5 19,0 19,5 21,0 22,5 23,5

c6,2 6,2 6,2 6,2 7,2 8,2 9,2 9,7 11,7 11,7 11,7 11,7 13,5 13,5 13,5 13,0 16,0

4039104 039111 039128 039135 038893 038916 038923 038930 038947 038954 038961 038978 038992 039005 039043 039050 039067

American sizes j drive 10 = 38 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished Sizes 1/4 and 5/16 with hexagon

%

1880 A-14 880 A-516 880 AZ-38 880 AZ-716 880 AZ-12 880 AZ-916 880 AZ-1932 880 AZ-58 880 AZ-1116 880 AZ-34 880 AZ-2532 880 AZ-1316 880 AZ-7 8 880 AZ-1516

K24,0 24,0 25,0 26,0 27,5 29,5 29,5 29,5 29,5 31,5 31,5 32,0 34,0 36,5

G10,0 11,8 13,8 15,8 18,7 20,1 21,1 22,1 23,8 25,8 26,8 28,3 30,3 32,3

H17,0 17,0 17,0 17,5 17,0 17,5 18,0 18,0 18,5 19,5 21,0 22,5 23,5 23,5

c 46,2 6,2 7,2 8,2 9,7 11,7 11,7 11,7 11,7 13,0 13,5 13,5 15,5 17,5 040056 040094 040360 040384 040292 040407 040339 040377 040308 040353 040346 040315 040391 040322

Impact Socket (6-Point)

Long style American sizes j drive 10 = 38 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

7 $

4%

$ 1

+ = with rubber ply for spark plugs

K G54 54 54 60 60 60 66 66 70 13,8 15,8 18,0 19,8 20,8 21,8 23,5 25,5 29,6

H17,0 17,2 18,5 19,5 19,5 18,5 19,0 20,0 21,0

c 410,0 11,0 12,0 15,0 15,0 16,0 20,0 20,0 22,0 040193 040216 040148 040230 040179 040209 040155 040186 040223

Suitable for all types of electric and pneumatic screwdrivers (rotary and impact wrenches) For excessive use j drive 10 = 38 Chrome-Vanadium special steel Surface phosphatized DIN 3129, ISO 2725-2

880 A 880 A Lg-716 880 A Lg-12 880 A Lg-916 880 A Lg-1932 880 A Lg-58 880 A Lg-1116 880 A Lg-34 880 A Lg-7 8

Lg-38

12-Point Socket

1880 S- 8 880 S-10 880 S-11 880 S-12 880 S-13 880 S-14 880 S-15 880 S-16 880 S-17 880 S-18 880 S-19

K28 28 28 28 32 32 32 32 32 32 32

G13,0 15,5 16,7 18,0 19,4 20,7 21,5 23,4 24,9 26,3 27,7

H f 419 19 19 19 22 22 22 22 22 22 22 5,9 6,7 7,8 7,7 9,2 9,2 10,2 11,2 11,2 14,0 14,0 041190 040957 040971 040995 041015 041039 041053 041077 041091 041114 041138

%

Long style j drive 10 = 38 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

* = not according to DIN + = with rubber ply for spark plugs j drive 10 = 38 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

1880 TZ- 9 * 880 TZ-10 * 880 TZ-11 * 880 TZ-12 * 880 TZ-13 * 880 TZ-14 * 880 TZ-15 * 880 TZ-16 * 880 TZ-17 * 880 TZ-18 * 880 TZ-19 * 880 TZ-20 880 TZ-20.8 1316 + 880 TZ-21 880 TZ-22

K G54 54 54 54 54 54 60 60 60 66 66 70 70 70 70 13,0 14,4 15,8 17,0 18,4 19,5 20,8 21,8 23,0 24,4 25,5 26,6 27,4 28,0 29,6

H17,0 17,0 17,2 18,5 18,5 19,5 19,5 18,5 18,5 20,0 20,0 21,0 21,0 22,0 21,0

c 410,0 10,0 11,0 11,0 12,0 15,0 15,0 16,0 16,0 20,0 20,0 22,0 16,5 22,0 22,0 041824 041602 041626 041633 041664 041688 041701 041718 041725 041749 041756 041763 041770 041794 041800

6-Point Socket

$

1880 Z- 9 880 Z-10 880 Z-11 880 Z-12 880 Z-13 880 Z-14B

K24,0 25,0 26,0 27,0 27,5 29,5

G13,0 14,4 15,8 17,0 18,4 19,6

H

c 4041985 041848 041855 041862 041879 041893B

17,0 6,2 17,0 7,2 17,5 8,2 18,5 9,2 17,0 9,7 17,5 11,7


89


6-Point Socket

h Socket

h Impact Socket

$ With universal joint For working in areas with restricted access j drive 10 = 38 For manual operation Chrome-Vanadium Surface chrome-plated, polished

C j drive 10 = 38 For outside TORX screws With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

1

r

K G

H 417 17 17 17 18,5 053070 053087 053094 053100 053117

1880 G-10 880 G-11 880 G-12 880 G-13 880 G-14 880 G-15 880 G-16 880 G-17 880 G-18 880 G-19

K43 43 44 44 45 45 46 46 47 48

G13,8 15,0 16,6 17,8 19,0 20,4 22,0 22,8 24,5 25,2

H19 19 19 19 19 19 19 19 19 19

c6,8 6,8 7,3 7,3 9,3 9,3 9,2 9,2 10,2 11,2

4040414 040438 040445 040452 040469 040476 040483 040490 040506 040513

880 Lg-E 8 7,52 65 10,5 880 Lg-E 10 9,42 65 13 880 Lg-E 11 10,08 65 14 880 Lg-E 12 11,17 65 14,9 880 Lg-E 14 12,90 65 16,5

For outside TORX screws For impact operation j drive 10 = 38 Chrome-Vanadium special steel Surface phosphatized

1

r

K

G9,0 10,0 11,5 14,0 15,9 17,7

H 419 19 19 19 19 19 041312 041336 041350 041237 041251 041275

4

880 S-E 6 5,74 28 880 S-E 7 6,22 28 880 S-E 8 7,52 28 880 S-E 10 9,42 28 880 S-E 12 11,17 28 880 S-E 14 12,90 28 With universal joint For working in areas with restricted access j drive 10 = 38 For outside TORX screws For manual operation Chrome-Vanadium Surface chrome-plated, polished

Universal Joint Socket Set (6-Point)

Spark Plug Socket

/7

I

1

r

K G H 443 44 46 48 19 19 19 19 19 19 19 19 040599 040537 040551 040575

880 G-E 8 7,52 880 G-E 10 9,42 880 G-E 12 11,17 880 G-E 14 12,90

h Universal Joint Socket Set

e 7 In plastic box With PUR foam insert all tools are snugly embedded 8 parts Contents: 880 G-10 11 12 13 14 15 17 19 For spark plug changing Long style j drive 10 = 38 With permanent magnet For manual operation Chrome-Vanadium Surface chrome-plated, polished 880 A Mg T e.g. for BMW 12-cyl. engines, M 70, 750i, 850i

1880 G/8

4040629

4 h sockets with universal joint Contents: 880 G-E 8 E 10 E 12 E 14

1880 G-E/4

4040520

1

S

T1316 58

K

G 4

880 Mg T 20,8 880 A Mg T 16,0

64 27,4 040872 64 21,7 040247

I 10 pieces In plastic drawer insert (3/12) j drive 10 = 38 For outside TORX screws With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished Contents: 880 G-10 11 12 13 14 15 16 17 18 19

1880 G/10

4121090

h Socket

1

r

K

G

H17,0 17,0 17,0 17,0 17,0 17,0 17,0 18,5

4039258 039272 039296 039319 039159 039180 039197 039227

B

880-E 5 4,75 28 7,0 880-E 6 5,74 28 8,0 880-E 7 6,22 28 9,0 880-E 8 7,52 28 10,5 880-E 10 9,42 28 13,0 880-E 11 10,08 28 14,0 880-E 12 11,17 28 14,9 880-E 14 12,90 28 16,5

For spark plug changing on motorcycles, e.g. HONDA, YAMAHA, SUZUKI, KAWASAKI, etc. With permanent magnet j drive 10 = 38 With outside hexagon 17 mm Chrome-Vanadium Surface chrome-plated, polished

1

S K G

H 4

880 Mg T-18 18,0 62 23,5 22,8 040889 Components and Spare Parts see pages 240 to 249

90


880 8801

Spark Plug Socket

Spark Plug Socket

Screwdriver Socket

I

/

For spark plug changing With permanent magnet j drive 10 = 38 With outside guide collar 23.6 mm for deeply located spark plugs Chrome-Vandium Surface chrome-plated, polished

For spark plug changing With fixing clamp to hold the spark plug The fixing clamp reduces the risk of insulator damage j drive 10 = 38 For manual operation Chrome-Vanadium Surface chrome-plated, polished

j drive 10 = 38 For inside hexagon screws With knurling For manual operation Blades made of special steel DIN 7422

3 - 9 - 12: not according to DIN + = with offset blade

18801- 3 + 8801- 4 + 8801- 5 + 8801- 6 8801- 7 + 8801- 8 8801- 9 + 8801-10 8801-12 2747 2748

M23,5 28,5 33,5 38,5 43,5 48,5 52,5 57,5 62,5

N50 55 60 65 70 75 80 85 90

F17,0 17,0 17,0 17,0 19,0 19,0 19,0 19,0 19,0

S 43 4 5 6 7 8 9 10 12 5 6 039364 039371 039388 039395 039401 039425 039432 039340 039357 017461 017478

1

S5

K G H4

880 A Mg T-1 16,0 / /8 64 21,9 21 040254

I

14766 4766-1 4766-2

S

T13

K

G

4040674 040131 049295 048991 087655

880 KF 20,8 880 A KF 16,0 16 16 14

16 5858 5

64 27,4 64 21,6 97 21,4 270 21,4 64 18,0

8

133,5 160 19,0 193,5 220 19,0

For spark plug changing, e.g. on BMW motorcycles (K-models) and on BMW passenger cars (motorsports M 3, M 5) With permanent magnet j drive 10 = 38 Without outside guide collar Chrome-Vanadium Surface chrome-plated, polished

American sizes j drive 10 = 38 For inside hexagon screws With knurling For manual operation Blades made of special steel

b 7

4

+ = with offset blade

1880 KF-01

14050123 8801 A-18 + 8801 A-532 + 8801 A-316 + 8801 A-7 32 + 8801 A-14 + 8801 A-516 8801 A-38 +

M23,5 28,5 33,5 38,5 43,5 48,5 52,5

N50 55 60 65 70 75 80

F17,0 17,0 17,0 17,0 19,0 19,0 19,0

4039487 039524 039494 039531 039470 039517 039500

Fixing clamp for 880 KF, 900 KF, 4767 KF Fixing clamp for 880 A KF, 900 A KF, 4766, 4766-1, 4767 A KF

1

S

K G H 4

880 A Mg T-3 17,5 / 1116 64 22,6 21,6 040278

880 A KF-01

050130

Spark Plug Socket Set

/ 7 I Fixing Clamp

INFORMATION

j drive 10 = 38 For inside hexagon screws With knurling Short style For manual operation Blades made of special steel

1167 x 97 x 37 mm

M17 17 17 17 17 17 17 17 11 11

N43,5 43,5 43,5 43,5 43,5 43,5 43,5 43,5 38,0 38,0

F17 17 17 17 19 19 19 19 17 19

S 43 4 5 6 7 8 9 10 6 7 053582 053599 053605 053612 053629 053636 053643 053650 115808 115815

In plastic box With PUR foam insert 4 pieces Contents: 880 KF 880 A KF 880 Mg T-18 880 A Mg T-3

1880 Mg T/4

4040902

Stainless and insensitive to heat Largest possible clearance of insulator minimization of possible breaks 6 spring elements firm hold of the plugs Damping of transverse motion

8801 K- 3 8801 K- 4 8801 K- 5 8801 K- 6 8801 K- 7 8801 K- 8 8801 K- 9 8801 K-10 2584-4 3884-1


91


Screwdriver Socket

Screwdriver SocketC

Flexible Handle 4039845 039852 039869 039876 i drive 10 = 38 Chrome-Vanadium Surface chrome-plated DIN 3122, ISO 3315

1 With ball hex j drive 10 = 38 For inside hexagon screws With knurling For manual operation Blades made of special steel

M23,5 23,5 28,5 32,5

N50 50 55 60

F17,0 17,0 19,0 19,0

/

8806-PH 1 8806-PH 2 8806-PH 3 8806-PH 4

18814

K250

4042036

18801 KK- 5 8801 KK- 6 8801 KK- 7 8801 KK- 8 8801 KK-10

M89,5 89,5 89,5 89,5 88,5 200

N116 116 116 116 116

F

S 4039586 039593 039609 039616 039579 j drive 10 = 38 For inside screws with internal serration XZN With knurling For manual operation Blades made of special steel DIN 3124

Sliding T-Handle

17,0 5 17,0 6 19,0 7 19,0 8 19,0 10

4

2527-5

227 19,0

5 016303


18808- 5 8808- 6 8808- 8 8808-10

&5 6 8 10

M13,5 13,5 14,5 14,5

N40 40 41 42

F19 19 19 19

4039982 039999 040001 039975

i drive 10 = 38 Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

18815

K198

4042067

Fine-Tooth Reversible Ratchet j drive 10 = 38 For inside TORX screws With knurling For manual operation Blades made of special steel

18802-T 15 8802-T 20 8802-T 25 8802-T 27 8802-T 30 8802-T 40 8802-T 45 8802-T 50

r M N3,27 3,86 4,43 4,99 5,52 6,65 7,82 8,83 17 17 17 17 17 17 17 17 43,5 43,5 43,5 43,5 43,5 43,5 43,5 44,5

F 419 19 19 19 19 19 19 19 039647 039654 039661 039678 039685 039708 039722 039753

j drive 10 = 38 For inside screws with internal serration XZN With knurling For manual operation Blades made of special steel DIN 3124

18808 Lg-8 8808 Lg-10

&8 10

M61,5 61,5

N F 488 89 19 19 040025 040018

i drive 10 = 38 72 teeth, actuation angle 5, allow operation of screws in areas with restricted access 2-component handle for more safety Chrome-Vanadium Surface chrome-plated DIN 3122, ISO 3315

2739 G-T 50 8,83 38 53

16,8 072156

18816 F

K199

4042074

Speeder

Screwdriver Socket

/ i drive 10 = 8 Chrome-Vanadium Surface chrome-plated DIN 3122, ISO 33153

Reversible Ratchet

/j drive 10 = 38 For slotted screws With knurling For manual operation Blades made of special steel

18811

K420

4042005

18803-1 x 5,5 8803-1,2 x 8 8803-1,6 x 10

M48,5 53,5 62,5

N75 80 90

F17,0 19,0 19,0

4039814 039791 039807

Spin Type Speeder

i drive 10 = 38 Ratchet wheel 30 teeth 2-component handle for more safety Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

18816 P

K199

4042203

j drive 10 = 38 For Phillips-Recess screws PH With knurling For manual operation Blades made of special steel Tips DIN ISO 8764-1

i drive 10 = 38 TRInamicULTRA handle Better application of force due to haptic elements of the handle Non-slipping even with greasy hands Chrome-Vanadium Surface mat chrome-plated

/

1B

K137

4067688

8812 U

i drive 10 = 38 With locking device and quick-release press-button Ratchet wheel 30 teeth Safe locking of the sockets

B

92



8801 8830

Reversible RatchetC By pressing the button, attached tools are easily released with just one hand With 2-component handle for more safety Chrome-Vanadium Surface chrome-plated, heads polished

Repair Set

Extension

/ i j drive 10 = 38 Chrome-Vanadium Surface chrome-plated, heads polished DIN 3123, ISO 3316

18816 S

K199

4042241Please observe the following characteristics: 1. Shift lever burnished (black) 2. Replaceable head 3. since 1985 with ergonomic plastic handle

18821- 1 8821- 3 8821- 5 8821- 6 8821- 8 8821-10 8821-12 8821-20 8821-28

K36 74 126 150 202 254 304 508 711

4042302 042357 042364 042371 042388 042319 042326 042333 042340

/ 1

4

Long style With hinge joint for working in areas with restricted access 2-component handle for more safety i drive 10 = 38 Ratchet wheel 30 teeth Chrome-Vanadium Surface chrome-plated, polished

Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 S, 8816 ST 2264-1, 6110 CT, 6110-1 CT, 6111-1 CT, 6114-1 CT, 6115-1 CT 6402-1, 6402-1 S, 6408-1

8816 P/6

1446173

Wobble Extension

18816 G

K276

Repair Set for ratchet wheel 10 = 8 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 ST, 6110 CT, 6110-1 CT, 6111-1 CT, 6114-1 CT, 6115-1 CT, 6402-1

4042104

8816 P/7 N

042234 i j drive 10 = 38 With ball shaped, conical outside square, allows 8 angular movement to every side By attaching a socket until its limit stop is reached, the wobble extension may also be used as rigid extension Flexible shaft enables getting over obstacles and borders in areas with restricted access Chrome-Vanadium Surface chrome-plated, polished

/

Repair Set for ratchet wheel 10 = 38 i consisting of: ratchet wheel with quick-release press-button, pawl, cap screws, 1 holding down bolt each (small and large), for 8816 N

4

8816 N/6

042197

Repair Set for ratchet wheel 10 = 38 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 8816 S, 6402-1 S

8816 S/7 Short style With hinge joint i drive 10 = 38 Ratchet wheel 30 teeth 2-component handle for more safety Chrome-Vanadium Surface chrome-plated, polished

048465

18822- 1 8822- 3 8822-10

K36 74 254

4042418 042432 042425

Universal Joint

Impact Extension

18816 GK

K218

4042142 i j drive 10 = 38 Chrome-Vanadium Surface chrome-plated, heads polished DIN 3123, ISO 3316


/ i drive 10 = With locking device and quick-release press-button Change-over switch on the handle enables one-hand operation Components are easily replaceable due to Komposit construction Shock resistant plastic body Ergonomic design Smooth-running ratchet wheel (30 teeth) Safe locking of the sockets By pressing the button, attached tools are easily released with just one hand Chrome-Vanadium Cover plates made of chrome-plated steel DIN 3122, ISO 331538

18820

K46,5

4042296

For impact operation i j drive 10 = 38 Chrome-Vanadium Special Steel Surface burnished

18805 S-3 8805 S-6

K78 152

4039821 039838

Impact Ball Joint

Flexible Extension

For impact operation i j drive 10 = 38 Chrome-Vanadium special steel Surface burnished

i drive 10 = 38 Flexible shaft enables getting over obstacles and borders and allows fast working even in areas with restricted access Chrome-Vanadium

18816 N

K200

4042173

18806 S

K51,5

4039883

18830

K210

4042487


93


Adapter

O-Ring and Connecting PinC

Socket RailC

1880 S-H 612

/

4041404

7 1880/10 H

K

4

10 pcs. 6-Point Sockets Contents: 880-10 11 12 13 14 15 16 17 18 19

For Sockets j drive 10 = 38 6 12 mm, E 5-E 14

? 2,5 x 14

For Sockets j drive 10 = 38 13 19 mm, extensions, universal joints, adapters

240

051441

10 pcs. 6-Point Sockets, long style Contents: 880 Lg-10 11 12 13 14 15 16 17 18 19

880 S-H 1317 j drive 10 = 38 Chrome-Vanadium Surface chrome-plated DIN 3123, ISO 3316

? 2,5 x 16

041398

880 Lg/10 H

240

040865

Safety Spring

10 pcs. 12-Point Sockets

74042562 042579For impact sockets according to DIN 3129

Contents: 880 TZ-10 11 12 13 14 15 16 17 18 19

880 TZ/10 H

240

041831

1i drive 12.5 =12

K36 26

10 pcs. 6-Point Sockets with universal joint Contents: 880 G-10 11 12 13 14 15 16 17 18 19

4

8858-1i drive 6.3 = 14

1880 S-HF 612

/

4041428

880 G/10 H

240

040612

8858-2

For Sockets j drive 10 = 38 6 12 mm, E 5 E 14

8 Screwdriver Sockets for inside hexagon screws Contents: 8801-3 4 5 6 7 8 9 10

Impact Adapter

? 16,6

For Sockets j drive 10 = 38 13 19 mm extensions, universal joints, adapters

8801/8 H

240

039463

8 Screwdriver Sockets for inside TORX screws Contents: 8802-T 15 T 20 T 25 T 27 T 30 T 40 T 45 T 50

880 S-HF 1319

? 18,0

041411

Socket Rail

8802 T/8 H

240

039784

Empty, with 16 clips, suitable for sockets of 880 series

880 HL

430

040650

Magnetic Socket Rail, empty For impact operation j drive 10 = 38 Chrome-Vanadium special steel Surface phosphatized

74039937 039951

18807 S 8807 S-1

K28,0 35,5

j10 =38

i drive 12.5 = 12

10 = 38

Impact Adapter

i drive 10 = 38 (DIN 3121) g 8 = 516 For impact sockets with j drive 10 = 38

18808 S-1

K75

j10 = 38

4040032

O-Ring and Connecting Pin

71880 S-G 612

/3

4041381 B i drive 10 = 38 Easy installation: 2 bore holes, e.g. for wall fixation Holding clamps adapted to the drive size Clear arrangement on rail keeps sockets always ready to hand Made of metal B

For Sockets j drive 10 = 8 6-12 mm, E 5-E 14

? 13 x 3,5

For Sockets j drive 10 = 38 13-19 mm, extensions, universal joints, adapters

10 exchangeable holding squares well-suited to the drive size (j 10 = 38) With magnetic back for fixation on, e.g. tool trolleys or in tool trolleys drawers (exactly fitting into the drawers of HAZET tool trolleys Assistent) Safe fixation of the sockets due to special locking system (ball clamping) in the holding square. Locking release by turning the socket by 90. Clear arrangement sockets are always ready to hand Rail made of metal, clips made of plastic

880 S-G 1317

? 16 x 3,5

041374

1880 MH L

K342

4120642

94



880 8858




/7

/6 7 W

/7

279 x 121 x 47 mm

344 x 188 x 56 mm

279 x 121 x 47 mm

j drive 10 = 38 In plastic box With PUR foam insert all tools are snugly embedded 16 pieces Contents: 880- 8 10 11 12 13 14 15 17 19 21 22 8815 8816 P 8820 8821-5 10

Especially for motorcycles, motorboats, etc. j drive 6.3 = 14 j drive 10 = 38 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 46 pieces Contents: 850-4 4,5 5 5,5 6 7 8 9 10 11 12 13 863 P 866 U 867-4 869 880-10 11 12 13 14 15 16 17 18 19 21 22 8816 P 8820 8821-6 2204-3 4 5 6 8 2208-4 6 8 9 2215-PH 1 PH 2 2216-PZ 1 PZ 2 2250-1 2

Additionally with Spark Plug Sockets j drive 10 = 38 In plastic box With PUR foam insert all tools are snugly embedded 21 pieces Contents: 880- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 880 A KF 880 KF 8816 P 8820 8821-5

1880 N-1

4040926

1882

4042289

1884 N-1

4042531

4




/7

/N e b 6

/b L K 7

344 x 188 x 56 mm

344 x 188 x 56 mm

344 x 188 x 56 mm

j drive 10 = 38 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 22 pieces Contents: 880- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 8815 8816 P 8820 8821-3 6

Especially suitable for maintenance work on modern cars requiring the use of different screw profiles j drive 6.3 = 14 j drive 10 = 38 6-Point Sockets TORX Sockets Screwdriver Sockets for inside hexagon and inside TORX screws In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 46 pieces Contents: 850-6 7 8 9 10 13 850-E 6 E 7 E 8 E 10 863 P 866 U 867-4 869 880-11 12 13 14 15 16 17 18 19 21 22 880-E 11 E 12 E 14 8816 P 8820 8821-6 2204-4 5 6 8 2223-T 10 T 15 T 20 T 25 T 27 T 30 T 40 2224-T 45 T 50 2250-1 3

Additionally with Screwdriver Sockets j drive 10 = 38 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 32 pieces Contents: 880- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 8801-4 5 6 8 8803-1 x 5,5 1,2 x 8 1,6 x 10 8806-PH 1 PH 2 PH 3 8815 8816 P 8820 8821-3 5 10

1880-2

4039036

1882-1

4100361

1885 N

4042593


95





/7

/7

/b L K 7

279 x 121 x 47 mm

578 x 235 x 88 mm 279 x 121 x 47 mm Additionally with Screwdriver Sockets j drive 10 = 38 In blue sheet metal box with plastic insert 58 pieces

4

American sizes Additionally with Spark Plug Sockets j drive 10 = 38 In plastic box With PUR foam insert all tools are snugly embedded 14 pieces Contents: 880 A-14 516 38 716 12 916 880 KF 880 A KF 8816 P58 1116 34

American sizes Additionally with Spark Plug Sockets j drive 10 = 38 In plastic box With PUR foam insert all tools are snugly embedded 17 pieces Contents: 880 A-14 516 880 AZ-38 716 12 916 58 1116 34 1316 7 8 1516 880 KF 880 A KF 8816 P 8820 8821-5

8820

8821-5

Contents: 880-6 7 8 880 Z- 9 10 11 12 13 14 15 16 17 18 19 20 21 22 880 TZ-9 10 11 12 13 14 15 16 17 18 19 20 21 22 8801-3 4 5 6 7 8 9 10 12 8803-1 x 5,5 1,2 x 8 1,6 x 10 8806-PH 2 PH 3 PH 4 8811 8812 8814 8815 8816 P 8820 8821-3 6 8 12 8830 8858-2

1884 A N-1

4042494

1884 AZ N-1

4042517

1888 ZN

4042654




/7

/b L K 7

/ b L K 7

578 x 235 x 88 mm 578 x 235 x 88 mm 279 x 121 x 47 mm j drive 10 = 38 In blue sheet metal box with plastic insert 58 pieces Contents: 880- 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 880 Lg- 9 10 11 12 13 14 15 16 17 18 19 20 21 22 8801-3 4 5 6 7 8 9 10 12 8803-1 x 5,5 1,2 x 8 1,6 x 10 8806-PH 2 PH 3 PH 4 8811 8812 U 8814 8815 8816 P 8820 8821-3 6 8 12 8830 8858-2 American sizes Additionally with Screwdriver Sockets With blank moulds for additional tools j drive 10 = 38 In blue sheet metal box with plastic insert 49 pieces Contents: 880 A-14 516 880 AZ-38 716 12 916 1932 58 1116 3 4 2532 1316 7 8 1516 880 A Lg- 38 716 12 916 1932 58 11 34 1316 7 8 16 880 Lg-20,8 (1316) 8801 A-18 532 316 7 32 14 516 38 8803-1 x 5,5 1,2 x 8 1,6 x 10 8806-PH 2 PH 3 PH 4 8811 8812 U 8814 8815 8816 P 8821-3 6 8 12 8830 8858-2

j drive 10 = 38 In plastic box With PUR foam insert all tools are snugly embedded 16 pieces Contents: 880 Z-10 11 12 13 14 15 17 19 21 22 880-8 8815 8816 P 8820 8821-5 10

8820

1880 Z N-1

4041992

1888 N

4042623

1888 A ZN

4042616

96



880 888

HAZET Range ofReversible Ratchets with Hinge Joint Komposit Reversible Ratchets Telescopic Reversible Ratchet Socket Sets Sockets / Screwdriver Sockets Extensions and many more. Telescopic Reversible Ratchet

3 SocketsFine-Tooth Reversible RatchetWith quick-release press-button Actuation angle 5, 72 teeth

Fine-Tooth Reversible Ratchets

Reversible RatchetWith locking device and quick-release press-button

2-component handle providing a better grip

4

Telescopic length continuously adjustable from 410 to 590 mm

Low expenditure of force due to longer lever arm

Socket Sets Sockets 3

Long style


97


6-Point Socket


6-Point Socket

$

C

C$K38 40 42 40 40 40 40 44 45 44 44 45 50 50

* = not according to DIN + = reinforced design, with deep hexagon profile for wheel nuts/bolts

C * = not according to DIN + = with rubber ply for spark plugs

$c 4053438 053421 043873 043880 043897 043903 043910 043927 043934 043941 043958 043965 043972 043989 043996 044009 044016 049660

1900 Lg-10 * 900 Lg-11 * 900 Lg-12 * 900 Lg-13 900 Lg-14 900 Lg-15 900 Lg-16 900 Lg-17 900 Lg-18 900 Lg-19 900 Lg-20.8 1316 + 900 Lg-21 900 Lg-22 900 Lg-24 900 Lg-26 900 Lg-27 900 Lg-30 900 Lg-32

K G85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 14,9 16,4 17,5 18,8 19,9 21,5 22,7 24,1 24,6 28,5 28,5 28,6 30,4 32,6 35,1 36,3 40,1 42,5

H22 22 22,0 22,0 22,5 23,2 23,6 23,6 23,6 26,0 24,5 24,5 25,0 27,5 29,5 30,0 33,0 35

1 j drive 12.5 = 12 With Traction profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

G27,5 28,8 32,8 29,5 31,3 32,5 33,8 35,0 38,8 36,3 37,6 38,8 42 44

H30 30 30 30 30 30 30 30 30 30 30 30 30 30

c 412,0 15,0 18,0 15,0 15,0 15,0 15,0 17,5 16,5 18,5 18,5 19,5 23,3 23,0 044283 044306 044313 044344 044368 044382 044405 044429 044436 044450 044474 044498 073207 073184


1

K38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 41,5 41,5 44,0 44,0 44,0 46,0 47,0 50,0 50,0 50,0 52,0

G12,0 13,5 14,9 16,4 17,5 18,8 20,3 21,5 22,7 24,1 25,4 26,6 27,8 29,0 30,4 31,4 32,6 33,9 35,1 36,2 37,5 38,7 40,1 42,3 46,0

H22,0 22,0 22,0 22,0 22,0 22,0 22,5 23,2 23,6 22,0 22,4 23,0 24,0 25,0 26,0 26,0 26,0 26,0 24,0 25,0 26,0 27,0 28,0 28,0 28,0

c7,8 8,8 10,8 10,8 11,3 11,3 11,8 11,8 12,2 12,7 14,2 14,2 14,2 14,1 17,6 17,6 18,2 17,9 17,8 19,7 20,6 23,4 23,3 23,0 23,3

4042968 042975 042715 042722 042739 042746 042753 042760 042777 042784 042791 042807 042821 042838 042845 042869 042876 042883 042890 042906 042913 042920 042937 042944 042951

4

900- 8 * 900- 9 * 900-10 900-11 900-12 900-13 900-14 900-15 900-16 900-17 900-18 900-19 900-20 900-21 900-22 900-23 900-24 900-25 900-26 900-27 900-28 900-29 * 900-30 900-32 900-34 *

900 S-18 900 S-19 900 S-19 R + 900 S-20 * 900 S-21 900 S-22 900 S-23 * 900 S-24 900 S-24 R + 900 S-25 * 900 S-26 * 900 S-27 900 S-30 900 S-32 *

6-Point Socket

10 11,5 12,3 13,3 14,2 15,2 16,0 19,0 19 19 18 19 22 25 28 28 31 34,2


$

American sizes j drive 12.5 = 12 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

1900 A-38 900 A-716 900 A-12 900 A-916 900 A-58 900 A-1116 900 A-34 900 A-1316 900 A-7 8 900 A-1516 900 A-1 900 A-1.116 900 A-1.18 900 A-1.316 900 A-1.14

K38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 41,5 44,0 44,0 45,0 47,0 50,0 50,0

G14,5 16,4 18,3 20,5 22,7 24,6 26,8 28,6 30,4 32,6 34,6 36,3 38,2 40,0 42,3

H22,0 22,0 22,0 22,5 23,6 22,0 23,0 25,0 26,0 26,0 24,5 25,0 26,5 28,0 28,0

c 410,5 10,5 11,0 11,5 12,5 12,0 14,0 14,0 17,5 20,0 20,0 21,0 22,0 25,0 24,0 043354 043378 043309 043392 043361 043316 043347 043323 043385 043330 043255 043262 043286 043293 043279

Long style For impact operation j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

+ = reinforced style with deep hexagon for wheel nuts/screws


1900 S Lg-13 900 S Lg-15 900 S Lg-16 900 S Lg-17 900 S Lg-18 900 S Lg-19 900 S Lg-21 + 900 S Lg-22 900 S Lg-24 900 S Lg-27

K G H c 485 85 85 85 85 85 85 85 85 85 20,8 23,5 24,8 26,2 27,5 28,8 31,3 32,5 35,0 38,8 25 30 30 30 30 30 30 30 30 30 13,0 18,0 16,0 16,0 19,0 19,0 17,5 17,5 17,5 19,5 044764 104277 044788 044801 044825 044849 044863 044887 044917 044931

C$

Suitable for all types of electric and pneumatic screwdrivers (rotary and impact wrenches) For excessive use j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized DIN 3129, ISO 2725-2 + = reinforced design, with deep hexagon profile for wheel nuts/bolts

$

$

1900 S- 8 900 S-10 900 S-11 900 S-12 900 S-13 900 S-14 900 S-15 900 S-16 900 S-17 900 S-17 R +

K38 38 38 38 38 38 38 38 38 38

G14,3 16,8 18,1 19,5 20,8 22,1 23,5 24,8 26,2 30,0

H25 25 25 25 25 25 30 30 30 30

c 46,0 6,9 8,5 8,5 10,0 10,0 11,0 11,0 12,0 14,0 044511 044085 044108 044122 044146 044177 044191 044214 044238 044252B Especially for mounting and dismounting wheels Long and extra-slim style For impact operation j drive 12.5 = 12

Long style j drive 12.5 = 12 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

1B

K85 85 85 85

G23,5 25,7 28,2 29,5

H30 30 30 30

c16 18 19 17,5

4118298 045723 045747 118304

901 S Lg-15 901 S Lg-17 901 S Lg-19 901 S Lg-21

98



900 904

Magnetic Holder with Sockets



C8

C Especially for mounting and dismounting wheels Long style For impact operation With plastic insert to protect the surface of the wheel bolts Additionally with outside plastic sleeve to protect the rims when screwing the wheel bolts Colour-coded plastic sleeve facilitates finding the correct socket size Replaceable plastic sleeve j drive 12.5 = 12

/

Long style for wheel bolts/nuts on e.g. Japanese and American vehicles j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

C

1900 A S Lg-1316

K G H c 485 31,3 30 17,5 043538

12-Point Socket

1903 S Lg-15 903 S Lg-17 903 S Lg-19 903 S Lg-21 903 S Lg/3 Impact sockets for all current wheel bolts always ready to hand With magnetic holder fixation, e.g. on Tool Trolley or car lift j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized 4 pieces Contents: 901 S Lg-15 17 19 21

K85 85 85 85

G26 30 30 30

H30 30 30 31

c 414 14 18 17 072231 045822 045839 055135 060344 j drive 12.5 = 12 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

%

903 S Lg-15: especially for SMART For Two

Especially forJapanese cars and SMART For Four Set of 3 pieces: 903 S Lg-17 19 21

Plastic Sleeve

1white ,for 903 S Lg-15

4081462 045808 045815 055692


1900 Z- 8 * 900 Z- 9 * 900 Z-10 900 Z-11 900 Z-12 900 Z-13 900 Z-14 900 Z-15 900 Z-16 900 Z-17 900 Z-18 900 Z-19 900 Z-20 900 Z-21 900 Z-22 900 Z-23 900 Z-24 900 Z-25 900 Z-26 900 Z-27 900 Z-28 900 Z-29 * 900 Z-30 900 Z-32 900 Z-33 * 900 Z-34

K38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 41,5 41,5 44,0 44,0 44,0 46,0 47,0 50,0 50,0 50,0 50,0 52,0

G12,0 13,5 14,9 16,4 17,5 18,8 20,3 21,5 22,7 24,1 25,4 26,6 27,8 29,0 30,4 31,4 32,6 33,9 35,1 36,2 37,5 38,7 40,1 42,3 43,6 46,0

H22,0 22,0 22,0 22,0 22,0 22,0 22,5 23,2 23,6 22,0 22,4 23,0 24,0 25,0 25,0 26,0 26,0 26,5 24,0 25,0 26,0 27,0 28,0 28,0 28,0 28,0

c 47,5 8,5 10,5 10,5 11,0 11,0 11,5 11,5 12,5 12,5 14,0 14,0 14,0 14,0 17,5 17,5 20,0 20,0 20,0 21,0 22,0 25,0 25,0 24,0 24,0 23,3 045686 045693 045457 045464 045471 045488 045495 045501 045518 045525 045532 045549 045556 045563 045570 045587 045594 045600 045617 045624 045631 045648 045655 045662 045679 144792

903 S Lg-015blue, for 903 S Lg-17

4

903 S Lg-017

1901 S Lg/4 901 S Lg/4 HL

4118434 118380

yellow, for 903 S Lg-19

903 S Lg-019red, for 903 S Lg-21

903 S Lg-021



$

$

Especially for mounting and dismounting wheels Long and extra-slim style For impact operation With plastic insert to protect the surface of the wheel bolts j drive 12.5 = 12 17 = e.g. for wheel bolts on MERCEDES-BENZ passenger cars

1

K

G25,7 28,2

H c 430 30 18 19 045778 045792

902 S Lg-17 85 902 S Lg-19 85

Especially for mounting and dismounting wheels on AMG-rims and/or alloy rims with deeply located wheel bolts Extra long style For impact operation With plastic insert to protect the surface of the wheel bolts In addition with outside plastic sleeve to protect the rims when screwing the wheel bolts Replaceable plastic sleeve j drive 12.5 = 12

/

1

K

G

H

c 4

904 S Lg-17 130 28,3 30 18,3 100576

C

B

B

the demonstration van is coming!


99



12-Point Socket

h Socket

%

% 1900-E 10 900-E 11 900-E 12 900-E 14 900-E 16 900-E 18 900-E 20 900-E 24

C

r9,42 10,08 11,17 12,90 14,76 16,70 18,45 22,16

K38,0 38,0 38,0 38,0 38,0 38,0 38,0 41,2

G13,3 14,0 14,9 16,7 19,0 21,0 23,5 28,5

H 422 22 22 22 22 27 27 27 042982 043002 043019 043033 043057 043071 043095 043118

For impact operation j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

2925 Long style j drive 12.5 = 12 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished DIN 3124, ISO 2725-1

11,17 140,0 15,9 23 018284

1

K38 38 38 38 38 38 38 40 40 40 44 45

G19,5 20,8 22,1 23,5 24,8 26,2 27,5 28,8 30 30 35 38,8

H25 25 25 30 30 30 30 30 31,3 32,5 30 30

c 46,8 6,8 9,3 9,3 9,2 9,2 10,7 11,6 11,7 11,7 18,6 29 061785 061792 061808 061815 061822 061839 061846 061853 075362 075379 115556 115822

2580-E 14 12,90 190,0 16,5 23 017003

4

900 S Z-12 900 S Z-13 900 S Z-14 900 S Z-15 900 S Z-16 900 S Z-17 900 S Z-18 900 S Z-19 900 S Z-21 900 S Z-22 900 S Z-24 900 S Z-27

h Socket Set

* = not according to DIN + = with rubber ply for spark plugs

1900 TZ-10 * 900 TZ-11 * 900 TZ-12 * 900 TZ-13 900 TZ-14 900 TZ-15 900 TZ-16 900 TZ-17 900 TZ-18 900 TZ-19 900 TZ-20.8 1316 + 900 TZ-21 900 TZ-22 900 TZ-24 900 TZ-27 900 TZ-30

K G85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 14,9 16,4 17,5 18,8 19,9 21,5 22,7 24,1 24,6 26,8 32,6 28,6 30,4 32,6 36,3 40,1

H22,0 22,0 22,0 22,0 22,5 23,2 23,6 23,6 23,6 26,0 27,5 24,5 25,0 27,5 30,0 33,0

c 410 11,5 12,3 13,3 15,2 15,2 16 19 19 19 25 19 22 25 28 31 053452 053445 045242 045259 045266 045273 045280 045297 045310 045334 045341 045358 045365 045389 045419 045426

5 pieces in plastic drawer insert (1/12) Contents: 900-E 10, E 12, E 14, E 16, E 18

30 for the axle shaft nut on VW Golf 4, Polo, New Beetle, AUDI TT 1.8, SKODA Octavia, Superb, Fabia

1900-E/5

4129331

900 S Z-30 50 30

42

23

086573

32 for the operation of the propeller shaft screws in the wheel hub on Touareg since 2003

h Impact Socket

900 S Z-32 50 38,2 30 900 S Z-34 55 29 30

30 35

115921 116034

36 for the axle shaft nut on BMW 3, 5 and 7-series, Z3, M3, VW Polo since 2001, SEAT Ibiza since 2002

900 S Z-36 60 30

50

25

100132

12-Point Socket

Long style American sizes j drive 12.5 = 12 With Traction Profile With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

%

For outside TORX screws For impact operation j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

1045167 045228 045204 045174 045198 045211 045181 045150 900 S-E 10 900 S-E 12 900 S-E 14 900 S-E 16 900 S-E 18 900 S-E 20 900 S-E 24

r9,42 11,17 12,90 14,76 16,70 18,45 22,16

K38,0 38,0 38,0 38,0 38,0 38,0 41,2

G H 414,0 15,9 17,7 20,0 22,0 24,5 30,0 25 25 25 25 30 30 30 044542 044566 044580 044603 044627 044641 044665

+ = with rubber ply for spark plugs

1 American sizes j drive 12.5 = 12 With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

K G85 85 85 85 85 85 85 85 18,3 20,5 22,7 24,6 26,8 30,4 32,6 34,6

H22,0 22,5 23,6 23,6 26,0 25,0 27,5 29,5

c 413,3 15,2 16 19 19 22 25 28

1900 AZ-38 900 AZ-716 900 AZ-12 900 AZ-916 900 AZ-1932 900 AZ-58 900 AZ-1116 900 AZ-34 900 AZ-2532 900 AZ-1316 900 AZ-7 8 900 AZ-1516 900 AZ-3132 900 AZ-1 900 AZ-1.116 900 AZ-1.18 900 AZ-1.316 900 AZ-1.14

K38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 38,0 41,5 44,0 44,0 44,0 46,0 47,0 50,0 50,0

G14,5 16,4 18,3 20,5 21,5 22,7 24,6 26,8 27,8 28,6 30,4 32,6 33,4 34,6 36,3 38,2 40,1 42,3

H22,0 22,0 22,0 22,5 23,2 23,6 22,0 23,0 24,0 25,0 26,0 26,0 24,6 24,8 25,0 26,5 28,0 28,0

c 410,5 10,5 11,0 11,5 11,5 12,5 12,5 14,0 14,0 14,0 17,5 20,0 20,0 20,0 21,0 22,0 25,0 24,0 043699 043729 043620 043743 043668 043712 043637 043682 043675 043644 043736 043651 043705 043576 043583 043606 043613 043590

900 TAZ-12 900 TAZ-916 900 TAZ-58 900 TAZ-1116 900 TAZ-34 900 TAZ-7 8 900 TAZ-1516 900 TAZ-1

Spark Plug Socket (6-Point)

I

h Socket

j drive 12.5 = 12 For outside TORX screws With knurling For manual operation Chrome-Vanadium Surface chrome-plated, polished

B

For spark plug changing Long style j drive 12.5 = 12 With permanent magnet For manual operation Chrome-Vanadium Surface chrome-plated, polished

B

100



900 916

Spark Plug Socket (6-Point)C

Speeder

Reversible Ratchet

IS T1316 58

/

C

/K275

1

K

G 4

1916 SP

4046317

900 Mg T 20,8 900 A Mg T 16,0

68 27,4 044023 71 22,5 043491

I

i drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated DIN 3122, ISO 3315

/4046010 i drive 12.5 = 12 With locking device and quick-release press-button Ratchet wheel 32 teeth Safe locking of the sockets By pressing the button, attached tools are easily released with just one hand 2-component handle for more safety Chrome-Vanadium Surface chrome-plated, heads polished

1911

K415

Flexible Handle For spark plug changing With fixing clamp Fixing clamp reduces damage to insulators j drive 12.5 = 12 For manual operation Chrome-Vanadium Surface chrome-plated, polished

/3 i drive 12.5 = 2 Chrome-Vanadium Surface chrome-plated DIN 3122, ISO 33151

1916 S

K275

4046287

1900 KF 900 A KF

S20,8 16,0

T1316 58

K71 71

G27,4 22,5

4043859 043408

1914-15 914-18

K396 472

4046027 046041

Reversible Ratchet with Hinge Joint

/

4

Sliding T-Handle i drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

1880 KF-01

4050123

Fixing Clamp for 880 KF, 900 KF, 4767 KF Fixing Clamp for 880 A KF, 900 A KF, 4766, 4766-1, 4767 A KF

1915

K298

4046072

Short style With hinge joint i drive 12.5 = 12 Ratchet wheel 32 teeth 2-component handle for more safety Chrome-Vanadium Surface chrome-plated, polished

Fine-Tooth Reversible Ratchet

880 A KF-01

050130

1916 GK

K270

4046201

INFORMATION Fixing Clamp i drive 12.5 = With 72 teeth, actuation angle 5, enables working in areas with restricted access With locking device and quick-release press-button 2-component handle for more security Chrome-Vanadium Surface chrome-plated DIN 3122, ISO 331512

Telescopic Reversible Ratchet

/

1916 F

K260

4046140 Continuously adjustable from 410 to 590 mm Long lever arm reducing the expenditure of force Especially appropriate for commercial vehicles, agricultural machinery and industrial installations Max. torque 600 Nm Easy fixation with knurled ring i drive 12.5 = 12 Ratchet wheel 32 teeth Chrome-Vanadium Surface chrome-plated, heads polished

Reversible Ratchet

/Stainless and insensitive to heat Largest possible clearance of insulator minimization of possible breaks 6 spring elements firm hold of the plugs Damping of transverse motion i drive 12.5 = 12 Ratchet wheel 32 teeth 2-component handle for more security Chrome-Vanadium Surface chrome-plated, polished DIN 3122, ISO 3315

1B

K410 590

4116591

916 Lg


101



Extension

Impact Extension

/ i drive 12.5 = 12 With locking device and quick-release press-button Change-over switch on the handle enables one-hand operation Components are easily replaceable due to Komposit construction Shock resistant plastic body Ergonomic design Smooth-running ratchet wheel (32 teeth) Safe locking of the sockets By pressing the button, attached tools are easily released - with just one hand Chrome-Vanadium Cover plates made of chrome-plated steel DIN 3122, ISO 3315

i j drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated, heads polished DIN 3123, ISO 3316

For impact operation i j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

1918-10 918-23

K248 575

4046416 046423

19005 S- 2 9005 S- 5 9005 S-10

K52 130 255

4043156 043163 043149

Adapter Extension

Universal Joint

4

1916 N

K275

4046256 For operating deeply located screws, e.g. on gearboxes j drive 12.5 = 12 i drive 10 = 38 Chrome-Vanadium Surface chrome-plated

Repair Set

i j drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated, heads polished DIN 3123, ISO 3316

1958-28

K700

4046706

1920

K70

4046515

1

4

Wobble Extension

Impact Ball Joint

Repair Set for ratchet wheel 12.5 = 12 i consisting of: shift lever, 2 screws, ball, compression spring, ratchet wheel and pawl for 916 S as well as for re-equipping 916 SP and 916 GK

916S/7

046300

Repair Set for shift lever 12.5 = 12 i consisting of: shift lever, 2 screws, ball, compression spring and pawl for 916 S, 916 SP, 916 GK, 916 Lg

916 SP/6

144624

Repair Set for ratchet wheel 12.5 = 12 i consisting of: shift lever, screws, ball, compression spring, ratchet wheel and pawl for 916 SP, 916 GK, 916 Lg

For impact operation i j drive 12.5 = 12 Chrome-Vanadium special steel Surface burnished

916 SP/7-1

046348 i j drive 12.5 = 12 With ball shaped, conical outside square drive allowing 12.5 angular movement to every side By attaching a socket until its limit stop is reached, the wobble extension may also be used as rigid extension Flexible shaft allows to get over obstacles and borders in areas with restricted access Chrome-Vanadium Surface chrome-plated, polished

19006 S

K69

4043170

Repair Set for ratchet wheel 12.5 = 12 i consisting of: ratchet wheel with quick-release press-button, pawl, cap screws, 1 holding down bolt each (small and large), for 916 N

Adapter

916 N/6

046270

Extension

1919- 1 919- 5 919-10 i j drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated, heads polished DIN 3123, ISO 3316

K46 123 248

4046447 046461 046454 j drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated DIN 3123, ISO 3316

Wobble Extension SetCardboard packed

1917-1 917-3 917-5

K45 76 123

4046362 046379 046386

13 pieces Contents: 919-1 5 10

4

1i drive 20 = 34

K50 36

4046676 046683

958-1i drive 10 = 38

919/3

046478

958-2

102



916 9008

Adapter Set

Magnetic Socket Insert

Screwdriver Socket Set

b 8 /

In HAZET plastic drawer insert, 6 pieces, 1 adapter each Contents: 858-1 8858-1 2 958-1 2 1058-2 Holds nuts and screws firmly in the socket Inserts made of plastic with integrated magnet Powerful retention force Universal application in all metric 6-point and 12-point sockets 10 up to 19 mm Easily inserted and removed Reusable 10 pieces, for metric sockets 10 11 12 13 14 15 16 17 18 19 mm

1958/6 958/6 PL

4073900 073191

Plastic drawer insert empty for 958/6

For inside hexagon screws j drive 12.5 = 12 In sheet metal box with plastic insert 12 parts Contents: 985-5 6 8 10 12 14 17 19 915 916 SP 917-5 918-10

Impact Adapter

1960 MgT

4097661

1985

4046768

Screwdriver Socket

Screwdriver Socket

/

4

For impact operation j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

1i drive 10 = 38

K37 49

4072545 043217

For slotted screws j drive 12.5 = 12 Chrome-Vanadium Surface chrome-plated

1980-2 x 13 980-3 x 19

M21,0 20,0

N38 38

F22,0 23,7

For inside hexagon screws j drive 12.5 = 12 With knurling Blades made of special steel DIN 7422

4046737 046744


9007 Si drive 20 = 34

1986- 4 * 986- 5 * 986- 6 986- 7 986- 8 986-10 986-12 986-14 986-17 * 986-19 * 986-22 2584

M22 22 22 22 22 22 22 22 20 20 20,5 32

N60 60 60 60 60 60 60 60 60 60 60 70

F23 23 23 23 23 23 24,6 24,6 28,5 31,5 28 23

S 44 5 6 7 8 10 12 14 17 19 22 6 046928 046935 046942 046959 046973 046874 046881 046898 046904 046911 082865 017041

9007 S-1

Impact Adapter

i drive 12.5 = 12 (DIN 3121) g E 11 = 716 (DIN 3126) For impact sockets with j drive 12.5 = 12

19008 S-1

K75

4043231

For inside hexagon screws j drive 12.5 = 12 With knurling Blades made of special steel DIN 7422


1 i drive 12.5 = 12 (DIN 3121) g E 8 = 516 For impact sockets with j drive 12.5 = 12

M5 5 6 8 10 12 14 17 19

N38 38 38 38 40 40 40 42 42

O19 19 20 20 21 21 21 23 23

F22 23 23 23 25 25 25 28 28

4046829 046836 046843 046850 046775 046782 046799 046805 046812

American sizes For inside hexagon screws j drive 12.5 = 12 With knurling Blades made of special steel

19008 S-2

K75

4043248

985- 4 * 985- 5 * 985- 6 985- 8 985-10 985-12 985-14 985-17 * 985-19 *

1986 A-532 986 A-316 986 A-7 32 986 A-14 986 A-516 986 A-38 986 A-716 986 A-12

M14 14 14 14 14 14 14 14

N52 52 52 52 52 52 52 52

F23 23 23 23 23 23 23 23

4047048 047017 047062 047000 047031 047024 047055 046997


103


Screwdriver Socket

Screwdriver Socket

Screwdriver Socket

/ Long style For inside hexagon screws j drive 12.5 = 12 With knurling Blades made of special steel DIN 7422 986 Lg-5 6 7 with offset blade * = not according to DIN

C

/M102 102 102 102 102 102

1986 KK- 5 986 KK- 6 986 KK- 7 986 KK- 8 986 KK-10 986 KK-12 2527-8

N140 140 140 140 140 140 23

F

S 4 For Phillips-Recess screws PH j drive 12.5 = 12 With knurling Blades made of special steel Tips according to DIN ISO 8764-1

23 5 052103 23 6 050666 23 7 052110 23 8 052127 23 10 052134 24,6 12 052141 8 016310

200 238

1988-PH 2 988-PH 3 988-PH 4

M18 18 18

N56 56 56

F23 23 23

4047192 047208 047215

1

M

N

F

S 4047109 047116 047123 047130 047086


4

986 Lg- 5 * 142 180 23,0 5 986 Lg- 6 99 137 23,0 6 986 Lg- 7 62 100 23,0 7 986 Lg- 8 42 80 24,6 8 986 Lg-10 103 141 24,6 10

b 8 / Short style For screws with internal serration XZN j drive 12.5 = 12 With knurling Blades made of special steel DIN 3124

/

/ Screwdriver Sockets for inside hexagon screws j drive 12.5 = 12 In sheet metal box with plastic insert 9 parts Contents: 986-5 6 7 8 10 12 14 17 19

1990- 5 990- 6 990- 8 990-10 990-12 990-14 990-16

&5 6 8 10 12 14 16

M14 14 15 15 17 20 22

N52 52 53 53 55 58 60

F23 23 23 23 23 24,6 24,6

4047307 047314 047321 047253 047277 047284 047291

1986/9 For installing and removing the fuel filter on VW/AUDI diesel engines with engine code AJM since 5/1999 (Passat B5, Golf 4, Bora, AUDI A3 and A4), as well as SEAT and SKODA diesel engines Also suitable for fuel filter draining

4051564

b 8 /5 pieces, in plastic drawer insert (1/12) Contents: 986-5 6 7 8 10

For installing and removing the wheel hub bearing at the rear axle AUDI A 3 since 2004 VW Touran since 2004

990-18 2752

18 12

45 17

85 45

26 23

108916 017522

1986 Lg-13

M60

N100

F24,6

S 413 089222

1986-P/5

4054145

/F Long style For screws with internal serration XZN j drive 12.5 = 12 With knurling Blades made of special steel DIN 3124 990 Lg- 8 e.g. for drive shafts on VW-AUDI 990 Lg- 9 for cylinder head bolts on TOYOTA Corolla 1.4 l and YARIS 1.0 l 990 Lg-14 for cylinder head bolts on VM diesel engines, e.g. CHRYSLER

Screwdriver Socket

/ Extra long style For inside hexagon screws j drive 12.5 = 12 With knurling Blades made of special steel

b 8 /

6 pieces, in plastic drawer insert (2/12) Contents: 986 KK-5 6 7 8 10 12

1986 S Lg-6 986 S Lg-8 2584-1

M112 81

N160 119 23

F S 423 23 6 6 8 047147 047154 017058

1986 KK-P/6

4054091

1990 Lg- 6 990 Lg- 8 990 Lg- 9 990 Lg-10 990 Lg-12 990 Lg-14

&6 8 9 10 12 14

M62 62 62 62 62 62

N100 100 100 100 100 100

F 423 23 23 23 23 23 056248 047352 103140 047338 047345 065240

210 248

b 8 /

5 pieces, in plastic drawer insert (3/12) With ball hex, especially for working in areas with restricted access (e.g. engine compartment) For inside hexagon screws j drive 12.5 = 12 With knurling Blades made of special steel B Contents: 986 Lg-5 7 10 986 S Lg-6 8

/J4054039 Extra long style For screws with internal serration XZN j drive 12.5 = 12 With knurling

1986 S Lg-P/5

B

104



986 992

Screwdriver SocketC Blades made of special steel For cylinder head bolts on engines of different car types, e.g. VW-AUDI, OPEL, TOYOTA DIN 3124

Screwdriver Socket


/J

C

/JR& M N F

C

O 8 /4054152

1991-7 991-8 991-9 991-10 991-12

4132799 047468 132812 047406 047413

1992 H-P/5

1

&

M

N

F 4

For car body and engine work on FIAT e.g. for valve and spark plug covers

990 S Lg-10 10 82 120 23 047369 990 S Lg-12 12 102 140 23 047376

7 8 9 10 12

25 25 25 25 25

63 63 63 63 63

23 23 23 23 23


FIAT engines 1.2 8V / 16 V

/J


P R 8 /

For cylinder head bolts on FIAT 2.0 engines For cylinder head bolts on ALFA, e.g. 1.6 16V engines

991-13 991-14 991-16

13 14 16

25 25 25

63 63 63

24,6 24,6 24,6

132829 047420 047437


Long style For inside TORX screws j drive 12.5 = 12 With knurling Blades made of special steel T 70: for cylinder head bolts on FORD 1.8 l diesel (Turbo), Fiesta, Escort, Sierra

/ 1 For screws with internal serration XZN j drive 12.5 = 12 In blue sheet metal box with plastic insert 9 pieces Contents: 990-5 6 8 10 12 14 16 991-8 10 Short style For inside TORX screws j drive 12.5 = 12 With knurling Blades made of special steel

r

M N

F 423 23,3 23 24,6 103133 057337 100590 047611

992 Lg-T 50 8,83 62 100 992 Lg-T 55 11,22 57 96 992 Lg-T 60 13,25 45 83 992 Lg-T 70 15,54 67 105

/JF4047475 047482 047499 047505 047512 047529 047543 047574 047598

4

1990/9

4051557

1992-T 20 992-T 25 992-T 27 992-T 30 992-T 40 992-T 45 992-T 50 992-T 55 992-T 60

r3,86 4,43 4,99 5,52 6,65 7,82 8,83 11,22 13,25

M N17 17 17 17 17 17 17 18 18 55 55 55 55 55 55 55 56 56

F23 23 23 23 23 23 23 24,6 24,6

P 8 /5 pieces, in plastic drawer insert (1/12) Contents: 990-5 6 8 10 12

1990-P/5

4054053

/ Short style With front bore hole For tamper resistant TORX screws (inside TORX screws with pin) j drive 12.5 = 12 With knurling Blades made of special steel

Extra long style For inside TORX screws j drive 12.5 = 12 With knurling Blades made of special steel T45: For intake bridge FORD Scorpio 2.4, 2.8 and 2.9 l injection engine, VW Passat gearbox types 02 A, 1.6, 1.8 and 2.0 l T55: For cylinder head bolts on various FORD engines, e.g. Mondeo 16 V

1

r

M N F 4100 100 100 102 138 138 138 138 23 23 23 23 103539 047635 103454 047642

P 8 /3 pieces, in plastic drawer insert (1/12) Contents: 990 Lg-8 990 S Lg-10 12

992 S Lg-T 40 6,65 992 S Lg-T 45 7,82 992 S Lg-T 50 8,83 992 S Lg-T 55 11,22

h Screwdriver Socket Set

1990 S Lg-P/3

4054046

1

r

M N F 417 17 17 17 17 17 17 18 18 55 55 55 55 55 55 55 56 56 23 23 23 23 23 23 23 23 23 062942 062959 062966 050857 050864 050871 050888 050895 062973 For inside TORX screws j drive 12.5 = 12 In blue sheet metal box with plastic insert 9 pieces

N 8 /

Screwdriver Socket

/JR

992-T 20 H 3,86 992-T 25 H 4,43 992-T 27 H 4,99 992-T 30 H 5,52 992-T 40 H 6,65 992-T 45 H 7,82 992-T 50 H 8,83 992-T 55 H 11,22 992-T 60 H 13,25

For spline socket screws RIBE CV j drive 12.5 = 12 With knurling Blades made of special steel


O 8 /5 pieces, in plastic drawer insert (1/12) B Contents: 992-T 30 H T 40 H T 45 H T 50 H T 55 H B

1991-5 991-6

&5 6

M25 25

N63 63

F23 23

4047444 047451

Contents: 992-T 20 T 25 T 27 T 30 T 40 T 45 T 50 T 55 T 60

1992/9

4051540


105


h Impact Screwdriver Socket

Socket Rail


/ Fr inside TORX screws For impact operation j drive 12.5 = 12 Chrome-Vanadium special steel Surface phosphatized

C j drive 12.5 = 12 Easy installation: 2 bore holes, e.g. for wall fixation Holding clamps adapted to the drive size Clear arrangement on rail keeps sockets always ready to hand Made of metal

$8

C j drive 12.5 = 12 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 25 pieces

/8 $

114 6-Point Sockets

K

4

1995 S-T 30 995 S-T 40 995 S-T 45 995 S-T 50 995 S-T 55 995 S-T 60

r5,52 6,65 7,82 8,83 11,22 13,25

M N F 421,4 21,1 21,1 22,4 22,4 22,1 40 40 40 40 40 40 25,1 25,1 25,1 25,1 25,1 25,1 047666 047680 057597 047703 047727 047741

Contents: 900-10 11 12 13 14 15 16 17 18 19 21 22 24 27

Contents: 900-10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 30 32 915 916 SP 917-5 918-10 920

1051779 900

4042685

900/14 H

430

Empty, with 16 socket clips suitable for sockets of 900 series

Socket Set (6-Point)043842

900 HL

430

Magnetic Socket Rail, empty

/8 $

4

O-Ring and Connecting Pin

81900 S-G 1014

/1

4410 x 216 x 65 mm

For sockets j drive 12.5 = 2 8 14 mm, 13 mm long style, E 10 E 16, T 30 T 60

? 19 x 4

044689 j drive 12.5 = 12 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 17 pieces Contents: 900-10 11 12 13 14 15 17 19 22 24 27 30 32 915 916 SP 917-5 918-10

For sockets j drive 12.5 = 12 15 27 mm, 16 27 mm long style, E 18 E 24, extensions, universal joints, adapters

900 S-G 1527

? 24 x 4

044696

For sockets j drive 12.5 = 12 8 14 mm, 13 mm long style, E 10 E 16, T 30 T 60

900 S-H 1014

? 3 x 20

044702 10 exchangeable holding squares well-suited to the drive size (i 12.5 = 12) With magnetic back for fixation on, e.g. tool trolley or in tool trolleys drawers (exactly fitting into drawers of HAZET tool trolley Assistent) Safe fixation of the sockets due to special locking system (ball clamping) in the holding square. Locking release by turning the socket by 90. Clear arrangement sockets are always ready to hand Rail made of metal, clips made of plastic

For sockets j drive 12.5 = 12 15 27 mm, 16 27 mm long style, E 18 E 24, extensions, universal joints, adapters

1906

4045891

900 S-H 1527

? 3 x 26

044719


Safety Spring

8For impact sockets according to DIN 3129

/8 $

14044733 900 MH L

K342

4120659

1900 S-HF 814

/

For sockets j drive 12.5 = 12 8 14 mm, E 10 E 16


? 21

For sockets j drive 12.5 = 12 15 27 mm, E 18 24, extensions, universal joints, adapters

/8 $344 x 188 x 56 mm j drive 12.5 = 12 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 15 pieces Contents: 900-10 11 12 13 14 16 17 18 19 21 22 24 916 SP 918-10 920 410 x 216 x 65 mm B B

900 S-HF 1530

? 25

044726

Socket Rail

$8

1932 N

4046553

106



900 995




/6 8 $

/8

/8 %

344 x 188 x 56 mm

410 x 216 x 65 mm

410 x 216 x 65 mm

Combinational set with j drive 6.3 = 14 and j drive 12.5 = 12 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 23 pieces Contents: 850-5 5,5 6 7 8 10 11 863 P 867-4 869 900-12 13 14 15 16 17 18 19 21 22 916 SP 917-5 920

American sizes j drive 12.5 = 12 In plastic box with integrated handle With PUR foam insert all tools are snugly embedded 20 piece

hazet socket data

Documents