hdt tools presentation (2000)
TRANSCRIPT
![Page 1: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/1.jpg)
1
HDT Italia s.r.l.
High Design Technology
Headquarters TORINO (ITALY)
Corso Trapani, 16
Tel. +390.11.746104
Fax. +390.11.748109
Alessandro Arnulfo
R&D Application Engineer
![Page 2: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/2.jpg)
2
HDT Italia s.r.l.
• Founded in 1990 with the aim to
develop and market high-
performance EDA tools
• Focused on:
– Signal Integrity (SI)
– Hardware modelling
– Design&Validation of digital systems
– EMC/EMI issues
![Page 3: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/3.jpg)
3
• Consulting & Services on :
– Signal Integrity and EMC/EMI evaluation ( from PCB to the whole system )
– Modeling
– Specific customer needs
– Definition of design&qualification methodologies
– Test & Measurement
– Software customization
HDT Italia s.r.l.
![Page 4: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/4.jpg)
4
HDT Italia s.r.l
PRODUCTS
• PRESTO
(Post-layout Rapid Exhaustive Simulation and Test of Operation)
![Page 5: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/5.jpg)
5
HDT Italia s.r.l
PRODUCTS
• SPRINT
(Simulation Program of Response of Integrated Network Transients)
• SIGHTS
(Standard Interface for Graphic Handling
of Transient Signals)
![Page 6: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/6.jpg)
6
• EmiR
(Emission Radiated)
• TEMA
(Transverse ElectroMagnetic Analysis)
HDT Italia s.r.l
PRODUCTS
![Page 7: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/7.jpg)
7
PRESTO Post-layout Rapid Exhaustive Simulation and Test of
Operation
![Page 8: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/8.jpg)
8
Application Domain
• Signal Integrity investigation – efficient handling of huge number of transmission lines
– simultaneous analysis of transmission, crosstalk and switching noise issues
• High-speed and complex system design&validation
• MCM, PCB, Backplane, Interconnection layout check
• EMC/EMI analysis
• Hardware quality verification
![Page 9: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/9.jpg)
9
Application Market
• Telecom
• Computer
• Automotive
• Aerospace
• Automatic Test Equipment
• Measurement
• Biomedical
• Consumer Electronics
![Page 10: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/10.jpg)
10
Technologies supported
• PCB
• MCM
• Hybrid
Interconnect levels • multiboards
• backplane
• LANS
• entire apparatus
![Page 11: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/11.jpg)
11
Platforms supported
• HP 9000/700 Series
• Sun SPARC Series
• Windows NT 4.0 (Intel)
![Page 12: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/12.jpg)
12
PRESTO Structure
PREFIS
SPRINT
Output
F
L
O
W
M
A
N
A
G
E
R
Model Capture System
PRLib
S.I. report SIGHTS
CadExtract
CAD
DATA
BASE
![Page 13: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/13.jpg)
13
PRESTO CadExtract • Links to
– Mentor Graphics, Boardstation
– COOPER&CHYAN TECHNOLOGY, SPECCTRA
– Cadence, Allegro
– Zuken Redac, Visula
– INCASES, THEDA
– Accel, P-CAD
• Complete data extraction of
– physical layout
– electrical data
![Page 14: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/14.jpg)
14
• Powerful simulation engine (SPRINT)
• Concurrent simulation of entire systems or selected nets
• Exhaustive checks of complex PCB in minutes
• Validated for high-speed applications up to 1Gbit/s
• Signal Integrity investigation – Crosstalk Analysis
– Simultaneous Switching Noise
PRESTO Features
![Page 15: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/15.jpg)
15
PRESTO Features (cont’d)
• Automated compliance analysis
– mask&wide range of stimulus patterns
– enhanced test capabilities
• User definable enhanced Signal Integrity analysis and report
• Time Domain Reflectometry based modeling and simulation
• Link to measurement equipment
• Link to analog simulators
![Page 16: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/16.jpg)
16
PRESTO Features (cont’d)
• Flexible model topologies&management – Automatic package assignment
– Multipower pin management
• What-if analysis of packages and components
• Distributed models of ground and power nets including planes
• Multi level modeling and simulation – electrical
– timing
– logic
– system
![Page 17: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/17.jpg)
17
PRESTO Results 70.00 80.00 100.00 120.00 140.00 160.00 180.00
TIME[nS]
-4.00V
-2.00V
0.00V
2.00V
4.00V
6.00V
8.00V#U4_1
#IC23_4
lower and upper masks
mask violations
Net CLK1 upper and lower masks v iolation Error f igure: 8.12
Net DAT1 upper and lower masks v iolation Error f igure: 6.01
Net ADD1 lower mask v iolation Error f igure: 0.21
Net ADD2 upper mask v iolation Error f igure: 0.11
Net ADD3 upper mask v iolation Error f igure: 0.11Net RD no v iolation Error f igure: -
Net RDN no v iolation Error f igure: -
70.00 80.00 100.00 120.00 140.00 160.00 180.00TIME[nS]
-4V
-2V
0V
2V
4V
6V
8V
Eye-diagram opening
Jitter
![Page 18: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/18.jpg)
18
PRESTO
SIP
IC IC
decoupling
GND
GND
GND
GND
VCC net
coupledsection
via
via
GNDplane
receiversdriversreceiver
via subckt SC macromodel
coupling
subcircuit
decoupling
capacitor
model
decoupling
capacitor
model
Vsupply
Vset
Z0 TD
Z0 TD
Z0 TD
Z0 TD
Z0 TD
Z0 TD
quiescentsupply load
model
* *
*
*
*
*
*
* * *
* checkpoint displayed by PRESTO
DR
DR
DR
RC
RC
RC SIP
Board layout
to
PRESTO
![Page 19: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/19.jpg)
19
SPRINT Simulation Program of Response
Integrated Network Transients
• Uses DSP-based algorithm – simulation time increases linearly with complexity
– uses fixed time step
– no convergence problems
• Very fast to handle large systems
• Efficiently handles inductors&transmission lines
• Uses accurate, efficient behavioural models for drivers and receivers
![Page 20: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/20.jpg)
20
COMPARISON SIMULATION&MEASUREMENT
Comparison between simulation
and measures of high-speed
multiboard system (155Mbit/s)
* 50000 elements
* 32 simultaneous input sequence
* 16000 time points
* 60 min. simulation time (HP 750)
![Page 21: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/21.jpg)
21
PRESTO FOR EMC I) Susceptibility
• Conducted Noise Susceptibility (CNS)
# modelling capabilities EMC models
# noise injection and propagation
# What- if analysis:
- filtering analysis (schematic)
- layout traces analysis (topology)
EMC project in Automotive field on a 2-layers analog / digital board good comparisons with measurements
![Page 22: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/22.jpg)
22
PRESTO FOR EMC
• Susceptibility to direct perturbations (not already automatically inserted)
# plane-wave model
# electrical equivalent models to simulate
the perturbation effects on the PCB nets
![Page 23: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/23.jpg)
23
PRESTO FOR EMC
II) Emissions
• Conducted Emissions (CE)
# modelling capabilities EMC models
# What- if analysis
# visualize the Conducted Emissions spectrum
in the input stage of the board
EMC project in Aerospace field on a multi-layered analog board good comparisons with measurement
![Page 24: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/24.jpg)
24
PRESTO FOR EMC
• Radiated Emissions (RE):
EMIR (EMIssions Radiated)
Prediction of PCB radiated ElectroMagnetic Interference (EMI) at the design state
![Page 25: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/25.jpg)
25
EMIR
• Display of PCB net radiation spectrum at user selected distances to compare with EMC normative.
• Uses Green Dyadic functions of actual PCB medium
Takes into account the board cross-section in the EM Field calculation.
![Page 26: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/26.jpg)
26
EMIR
• Interfaced with PRESTO, it uses accurate differential mode current distribution given by SPRINT simulator
Effects like reflections, impedance mismatches, ground-bounce, actual VCC/GND planes influence can be taken into account simultaneously.
Predicts VCC/GND nets radiation
![Page 27: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/27.jpg)
27
EMIR
• Display of PCB radiation diagrams at user selected frequencies for Localization of EMI problems
• Near-field algorithm for H field
• Takes into account the measurement setup: – antenna polarization
– metal floor of semi-anechoic chamber
![Page 28: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/28.jpg)
28
EmiR_Cable
• Radiation due to common mode current that spreads along cables:
- PCB which ground plane is connected to a cable.
- shielded coaxial cable
- twisted cable
• Use of fast 3D algorithm based on PEEC method
![Page 29: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/29.jpg)
29
MODELLING OF PARASITIC COUPLINGS
Ltrack
Lplane
C12/2
C10/2
R
R
+
VT
C20/2
C12/2
C20/2
C10/2
![Page 30: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/30.jpg)
30
Parasitic parameters evaluation: PEEC (Partial Elements Equivalent Circuit)
Numerical method for the circuital modelling of parasitic effects in
3D structures of conductors and dielectrics ;
Leads to an equivalent circuit reduction of the structure;
The equivalent circuit is formed only by lumped passive elements
(RLC circuit);
![Page 31: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/31.jpg)
31
PEEC METHOD
The structure is subdivided into parts:
- conductive volume cells, where conduction current flows;
- dielectric volume cells, where polarization current flows;
- dielectric/dielectric or metal/dielectric surface cells, where
electric charges are stored.
At each cell a different circuit element ( L, M, C, R) is associated
(partial elements)
Using retarded controlled generator (retarded PEEC) it is
possible to take into account the propagation delay of the signals
![Page 32: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/32.jpg)
32
PEEC METHOD: EXAMPLE OF SUBDIVISION OF THE STRUCTURE IN SURFACE CELLS
MACROMODEL APPROACH:
a partial capacitance between each pair of cells is obtained;
they are grouped leading to a mutual capacitance between
each pair of conductors
![Page 33: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/33.jpg)
33
PEEC METHOD: OPTIMIZATION
The number of cells used for the discretization is very important to
obtain accurate results: it must be optimized;
more accurate results
possible numerical errors
longer computation times
Good trade-off: uniform discretization;
More cells
![Page 34: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/34.jpg)
34
EMISSIONS OF THE PCB WITH AN ATTACHED CABLE
• Thevenin-like approach for the cable excitation: (PEEC)
cable
Vn=j Ltrans Isign +(C20/C10)Vsign
C10
metal floor of semi-anechoic
room
Ltrans= Lplane - Mplane/track
H
Inductive and
Capacitive
coupling
Equivalent noise voltage generator
controlled by voltage and current on the track
(coefficients depending on PEEC parameters)
![Page 35: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/35.jpg)
35
EMISSIONS OF THE PCB WITH AN ATTACHED CABLE
The Transmission Line Theory (TLT) to calculate the current
distribution on the cable, modeled as a lossy transmission line
The Hertzian Radiating Dipoles Method to calculate the RE of the
cable
The image principle to take into account the floor of the semi-
anechoic chamber
![Page 36: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/36.jpg)
36
RE from one cable placed horizontally above the floor of the
semi-anechoic chamber;
An inductive common mode filter (choke) placed in series to
the cable;
A one-layer PCB (microstrip structure) horizontally or vertically
oriented;
An unlimited number of tracks placed in any positions:
optimized algorithm to avoid too long computation times due to
PEEC matrices inversions;
EMISSIONS OF THE PCB WITH AN ATTACHED CABLE (cont’d)
![Page 37: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/37.jpg)
37
DESCRIPTION OF THE BOARD
30cm
21cm
1.6mm
![Page 38: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/38.jpg)
38
DESCRIPTION OF THE SETUP
1 m
3 m
1,3 m
1,2 m
cable diameter = 5mm
shielded
oscillator
![Page 39: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/39.jpg)
39
COMPARISON BETWEEN MEASURED AND SIMULATED COMMON MODE CURRENT
0.01 0.1 150
40
30
20
10
0
10
20
30
40
50
Frequency in GHz
dB
![Page 40: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/40.jpg)
40
COMMON MODE CURRENT THROUGH THE CABLE (EmiR_Cable)
0.01 0.10 1.00
-50.00
-40.00
-30.00
-20.00
-10.00
0.00
10.00
20.00
30.00
40.00
50.00
f [GHz]
dBA
![Page 41: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/41.jpg)
41
COMPARISON BETWEEN THE MEASURED AND THE SIMULATED
RADIATED FIELD
10 100 1 10320
10
0
10
20
30
40
50
60
70
80
Frequency in MHz
|E| [dBV/m]
![Page 42: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/42.jpg)
42
EMISSIONS OF THE PCB WITH AN ATTACHED CABLE (EmiR_CABLE) |E| [dBV/m]
Frequency in GHz 0.00 0.01 0.10
-20
-10
0
10
20
30
40
50
60
70
80
1.0
![Page 43: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/43.jpg)
43
CONCLUSIONS ON SPRINT
• SPEED ENHANCES AND ABSENCE OF CONVERGENCE PROBLEMS ARE OBTAINED BY THE DWN APPROACH
• SIMULATION TIME RISES PROPORTIONALY WITH NETWORK COMPLEXITY
• LARGE NETWORKS CAN BE SIMULATED
• MIXED-MODE (ELECTRICAL/TIMING/LOGIC) SIMULATION IS SUPPORTED
• BTM MODELS EXTRACTED FROM TDR MEASUREMENTS ARE SUPPORTED
• HIGH SPEED DIGITAL SYSTEMS CAN BE SIMULATED
![Page 44: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/44.jpg)
44
CONCLUSIONS ON MODELING
• SPRINT SYNTAX IS OPEN TO IBIS STANDARD
• 4-PORTS MODELS FOR I/O TAKE INTO ACCOUNT THE EFFECTS OF SUPPLY DISTRIBUTION NETWORK
• CAPABILITY TO MODEL ANALOG DEVICES FOR EMC SIMULATIONS
• CAPABILITY TO BUILD VERY ACCURATE MODELS (S PARAMETERS BASED) FOR HIGH SPEED DIGITAL SYSTEMS
![Page 45: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/45.jpg)
45
CONCLUSIONS ON PRESTO FOR SI
• SPEED OF THE SIMULATION
• HIGH ACCURACY OF RESULTS, GOOD AGREEMENT WITH MEASUREMENTS
• SIMULTANEOUS SIMULATION OF ALL NETS OF A COMPLEX PCB IS AVAILABLE
• PRESTO CAN SIMULATE SIGNAL INTEGRITY, CROSSTALK BUT ALSO SIMULTANEOUS SWITCHING NOISE ON VCC/GND NETS OR PLANES
• PRESTO OFFERS FACILITIES LIKE EYE-DIAGRAMS TO STUDY HIGH-SPEED PCBS
![Page 46: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/46.jpg)
46
CONCLUSIONS ON PRESTO FOR EMC
• PRESTO IS ABLE TO PREDICT RESULTS OF COMPLIANCE TESTS FOR: – RADIATED EMISSIONS
– CONDUCTED NOISE SUSCEPTIBILITY
– CONDUCTED EMISSIONS
• COMPARISONS BETWEEN SIMULATIONS AND MEASUREMENTS IN THE CONDITIONS REQUIRED BY EMC STANDARDS-> GOOD AGREEMENT
![Page 47: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/47.jpg)
47
FUTURE EVOLUTIONS
• PORTING OF PRESTO ON WINDOWS-NT
• CUSTOM SOLUTIONS
• OTHER FEATURES FOR THE PREDICTION OF RADIATED EMISSIONS
![Page 48: HDT TOOLS PRESENTATION (2000)](https://reader036.vdocuments.net/reader036/viewer/2022062223/58d0fd2e1a28abc00b8b66cf/html5/thumbnails/48.jpg)
48
APPLICATION OF HDT TECHNOLOGY/PRODUCTS WITHIN
ZUKEN-REDAC ENVIRONMENT
• USE OF SPRINT AND TEMA (AND EmiR) TO DRIVE CONSTRAINTS TO BE APPLIED TO ZUKEN-REDAC ROUTER
• USE OF SPRINT, LIBRARIES AND SIGHTS TO PRODUCE ON-LINE SIMULATIONS