Heat pump controllers

TEM AG Triststrasse 8 Switzerland Tel. +41 (0)81 254 25 11 info@tem.ch

CH-7007 Chur Fax +41 (0)81 254 25 39 www.tem.ch

)))

)))

))) (((

System controller

Heating circuitcontroller

Heat pump controller

Solar controller

Biomass controller

Boiler controller

Outdoor sensors

Room devices

Heating circuit controllers

Master remote control

Master remote control

Computer / web

via iCom

The hot wire to all components – eBUS

Simply ingenious: All devices of the TEM system are equipped with an eBUS interface. This makes the most complex problems

simple to solve and simple to be expanded at any time. The hot wire from TEM is of course also available as wireless versions, for

example as wireless temperature sensors, room devices. Through iCom, the system can also optionally be operated via PC/inter-

net. - An intelligent and future oriented system for an efficient control of heating appliances.

SE 6001 SE 6300 SE 6300 WPC MUcMUc MUMUL

OUTPUT 230V Relay electro-mechanical 16 8 8

INPUTSensor 12 6 6 Optocoupler 6 2 2Set point value 1 1 1Pressure sensor 2 - -

Voltage supply is: 230 VAC ±10% 50-60 Hz | The voltage measuring circuit: 12 V, isolated 4 kV The heating circuit controllers are protected with a 3.15 A fuse.

Whether air-water or brine-water, the SE 6001 WPC by TEM can be easily adjusted to various systems. Of course it has a defrost

function for air-water machines and a cooling function for all types. All actuators and sensors are operated from the WPC or

scanned and processed. The status of the pressure control elements normally used for the monitoring of high and low pressure

is also recorded by the WPC. In addition the heat pump can be blocked by an EVU signal. - Additional heating circuits? Addi-

tional solar inclusion? No problem, because additional TEM controllers can be connected via the eBUS and set via the master

remote control unit.

Standard Heating circuit Heating circuit

controller controller

Warmly recommended

TEM has sold controls for heat pumps for more than 25 years. In the course of the years the first simple con-

trols have developed into complex controllers which regulate and monitor the technology of a complete heat

pump. Know how and TEMs product assortment are so extensive today that even producers of heat pumps

base their innovations on them.

SE 6001

KW

L

M2

TV2

UW

TV1

TP0

TB

Z

U2U1

WW

TA

)))

TKV

WE

M

The SE 6001 WPC controls air-water, water-water or brine-water heat pumps including the complete cooling circle. Furthermore

an additional electric heating can be controlled depending on time and temperature. The WPC manages heating, cooling and

domestic hot water through an integrated heat / energy management. The controller consists of a built-in part and a remote

operating unit, either a built in device or a wall mounting.

Integrated functions

· Control of the heat pump air-water,

water-water, brine-water

· automatic defrosting

· 1 heating circuit (outdoor temperature

compensated)

· Switching to cooling mode

· DHW preparation

· Circulation pump control

· Storage tank management

· Cascade management

· Energy management

· Measurement of heat quantity

Variations and equipment

· 16 electro-mechanical outputs for the

control of valves or pumps

· 12 sensor inputs NTC 5 kOhm

· 1 input or output for set points

· 6 optocouplers

· 2 inputs for pressure sensors

· eBUS communication interface

What fun is the most flexible controller if the operation is often a

test of your patience? The TEM master remote controls MB 6100

and MB 6400 with their clear menu structure are self explanatory, all

parameters are shown as text. The target and actual temperatures

can thus quickly be displayed, operating modes selected using direct

buttons and functions can be comfortably edited and activated.

Universal and intelligent – an all-rounder

Air-water application

HEATING- OR COOLING WATER

AKTIv COOLING

KW

L

TV2

UW1

TPO

TPM

TV1

TPV

TB

Z

U2U1

WW

TA

)))

TKV

WE

M

TWE

PND

HDND THG TWV EHZ

WEP

ULV-WWL

ULV-KB

TSG VD1 VD2

WQP

TWA TVD TKA TWREV

AV

PHD

No parameter remains unobserved and no setting is left up to coincidence: The SE 6001 WPC heat pump controller really

leaves no stones unturned when it comes to making the most of a heat pump. Of course everything could be more

simple – however with simple solutions you don’t even closely reach the same efficiency.

Everything under control

TWE: Heat source temperature input

TWA: Heat source temperature output

TWV: Heat pump flow temperature

TWR: Heat pump return flow temperature

TSG: Coolant suction gas temperature

THG: Coolant heat gas temperature

TVD: Coolant vaporizer temperature

TKA: Coolant condenser output temperature

ND: Suction gas pressure

HD: Hot gas pressure

PND: Low pressure control

PHD: High pressure control

AV: Defrosting or cooling valve

EV: Expansion valve

VD1: Compressor stage 1

VD2: Compressor stage 2

WQP: Heat source pump or vaporizer fan at air-water heat pump

ULV-WWL: Diverter valve DHW

ULV-KB: Diverter valve cooling

EHZ: Addition electric heater for frost protection

Brine-water application

COOLING WATER

Passiv COOLiNG

SE 6300

MUMUL

MUcMUc

L

M2M1

T2T1TB

U2U1

WW

MM

KW

M2M1

C C

T2T1

U2U1

MM

The SE 6300 MUMUL or MUcMUc is specially designed for additional heating circuits. This heating circuit controller can manage

two independent mixed heating circuits and either domestic hot water preparation (MUMUL) or switch to cooling. The parameters

are also set via the master remote control unit MB 6X00, and additionally individual remote control units can be allocated to the

corresponding zones. The keys on the device allow activating mixers or pumps for test purposes during installation.

Integrated functions:

· 2 heating circuits (Cooling only for MUcMUc)

· DHW preparation (MUMUL only)

· Two wire connection to the remote control devices

· Large terminal box

· Stand protection functions for mixer and pumps

· Frost protection functions of the room temperature and DHW

· Pavement drying program integrated

· Inputs for floor safe ty temperature limiter

· Energy management

Models and equipment:

· 8 electro-mechanical outputs for the control

of valves or pumps

· 6 sensor inputs NTC 5 kOhm

· 2 optocouplers

· 1 input or output for set points

· eBUS communication interface

Additional heating circuits – no problem

Why not wireless? If a cabling is not possible or not desired, the TEM

controller SE 6300 can be integrated in the eBUS system with the

optional wireless transceiver/coordinator - a very elegant solution.

HEATING WATER

COOLING WATER

A broad range of accessories from simple wired temperature to wireless sensors, or to the sophisticated remote

control units, rounds off the TEM system. A system solution - one fits the other. That is one of the reasons why a

TEM controller is easy to work with also during the installation and later when it is in operation.

ZTF 222 + ZTF223 ZTF 224 ZVF 210 ZAF 500 ZAF 600 RF

Technical specifications: Measurement range: -50 ... 90°C (ZTF 223 up to 180°C, ZTF 224 up to 250°C) | el. current < 1mA | sensor

element: NTC 5000 | Dimension: 6 x 50 x 0.4 mm | wire: 2 x 0.34 mm² | Available cable lengths: 1500 mm, 2500 mm, 4000 mm |

wireless outdoor sensor ZAF 600 RF

FB 6100 FS 6200 (RF) FB 6200 (RF) CO 6200 RF

The remote control units can be connected to all TEM eBUS heat controllers and allocated to a particular zone. For model 6200 two

designs are available: The FS 6200 without display with room temperature setting wheel as well as the FB 6200 with display for the

temperature and operating mode. The mode of operation is changed using a push button, the temperature through a setting wheel.

The CO 6200 RF is the wireless-eBUS-receiver which is connected using 2-wire connection to the eBUS. FS 6200 and FB 6200 are

available under the description RF also as wireless models.

MB 6100 MB 6400

Master remote control unit for programming and operating the SE devices. The display of the status, parameter, target and actual

values occurs in plain text. They are operated through the comfortable “press-turn” operating concept. For quick access of special

functions, there are 6 quick selection direct keys available. The remote control unit can be mounted in standard cutout (96x144mm)

(MB 6400) or on the wall (MB 6100).

System accessories

Tem

pera

ture

sen

sors

M

aste

r rem

ote

cont

rol

Roo

m te

mpe

ratu

re r

emot

e co

ntro

l

Heating appliances are becoming more and more complex:

Several mixed heating circuits, differing heating demands, sto-

rage tank configurations, utilization of solar energy, ecological

and economic requirements. It is no longer enough to simply

switch the heating appliance on or off. Already back in the early

eighties, TEM introduced several universally usable heat cont-

rollers, and the TEM system controllers today can easily cope

with the existing and future requirements. The core is a unique

energy management which determines the required heating

demands and calculates the therefore necessary heating capa-

city under consideration of the various available heat sources.

In spite of complex functionalities, TEM system controllers are

simple to mount and operate. An extensive range of accesso-

ries supports the installer in installation and operation.

TEM develops and produces electronics, hard- and software

for energy-efficient heating, ventilation and climate controls.

The leading know how is based on more than 40 years of

experience. A constant focus on research and development, an

excellent organized and structured production and after sales

service guarantees high quality and innovative products and

solutions.

TEM system– one thing fits the other

TEM AG Triststrasse 8 Switzerland Tel. +41 (0)81 254 25 11 info@tem.ch

CH-7007 Chur Fax +41 (0)81 254 25 39 www.tem.ch