HEAT TRANSFER THERMIC OILS

VELTHERM 150 is a thermic fluid designed to cover a broad range of heat transfer applications.The product is manufactured using special refining techniques and is recommended in service involving a maximum bulk temperature of 2900.

The product is characterized by the following:- Excellent oxidation & Chemical stability.- Good heat transfer properties.- Low volatility.- Non corrosive & non toxic.

It is used for most conventional operations and finds extensive application in the textile, pharmaceutical, chemical and processing industries. Using Thermo pack heat exchangers.

PROPERTIES VELTHERM 150

Viscosity, cSt @ 400 C 30Flash Point COC, 0C 200(Typical) Pour Point oC Max 0

Copper strips corrosion 13 hrs @ 1000C (ASTM).Max. Neut Number 0.100mg KOH/gm, Max.

Specific heat Kcal/Kg-0C

260 0C 0.629280 0C 0.647300 0C 0.665

Thermal Conductivity

Kcal / hr - mt - 0C260 0C 99.7280 0C 98.4 300 0C 97.2

HEAT TRANSFER THERMIC OILS

VELTHERM 250 :-

Veltherm 250 is a premium quality Heat Transfer Oil specially developed for Heat transfer systems where bulk operating temperatures go upto 3100C. This product is derived from the finest quality petroleum base stocks and is fortified with high performance additives to enhance performance at higher temperatures.

The silent features of Veltherm 250 are:- Ability to withstand higher operating temperatures, upto 3100C.- Reduced oxidation and thermal degradation. Hence, longer life.- Minimal fouling and deposit formation on heat transfer surface. Hence it offers

improved heat transfer.

Veltherm 250 gives excellent performance in high temperature Hear Transfer Systems. It can even replace imported synthetics products with a few minor system modifications and operate satisfactorily subject to the above temperature limit. It is an excellent heat transfer fluid & finds a wide range of applications in textile, pharmaceutical, chemical & processing industries. Using Thermo pack heat exchangers

VELTHERM 250 :-

PROPERTIES VELTHERM 250

Viscosity, cSt @ 400 C 33Flash Point COC, 0C 205(Typical)

Pour Point oC Max 0

Copper strips corrosion 13 hrs @ 1000C (ASTM).Max. Neut Number 0.050mg KOH/gm, Max.

Specific heat Kcal/Kg-0C

260 0C 0.630280 0C 0.640300 0C 0.666

Thermal Conductivity

Kcal / hr - mt - 0C260 0C 96.6280 0C 95.3 300 0C 94.1