heavy wall dp & drill collars
TRANSCRIPT
-
8/13/2019 Heavy Wall Dp & Drill Collars
1/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html
28. HEAVY WALL DP& DRILL COLLARS
28.1 HEAVY WALL DRILL PIPE
- Functions
Part of the Drilling String, Heavy Drill pipe has aunit weight in between Drill Pipe and Drill Collars.They are run between
Drill Collars and Drill Pipes to:
1. Create a gradual reduction of BHA rigiditybetween the two.
2. Reduce fatigue stress on the DP just above theDCs.
3. Reduce wall friction in vertical deep wells withhigh RPM.
HW DP dimensions are standardized by API 7Specifications.The relevant ISO standard is the 10407 Spec. ENIrequirements are defined by internal specification.
- HW Saves Rig Time by ReducingTrip Time
HWs stand back in the rack likeregular Drill Pipe
http://www.apirig.com/product30.htmlhttp://www.apirig.com/product32.html -
8/13/2019 Heavy Wall Dp & Drill Collars
2/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 2
- Reducing wall friction In Deviated Well
Reducing wall friction in deviated wells, heavy wall DP gives better direction control in deviatedwells.
-
8/13/2019 Heavy Wall Dp & Drill Collars
3/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 3
- Dimensions
ENI requires that all HWDP connections must have appropriate bore back boxes features.
External Tool Joint diameter = same as regular Drill Pipe; Tool Joint length > regular Drill Pipe; Body thickness > regularDrill Pipe;
- Heavy Wall Drill Pipe by SMF
-
8/13/2019 Heavy Wall Dp & Drill Collars
4/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 4
28.2 DRILL COLLARSDrill collars are the components of the drill string that provide the weight on bit when drilling.They are thick-walled, hollow
tubulars machined from solid bars of steel (usually plain carbon) ornon-magnetic nickel-copper alloy or other non-
magnetic premium alloys.The outside diameter may be machined with helical grooves (spiral) to reduce the potential
contactsurface for differential sticking prevention.ENI requirements are defined by internal specification. Drill Collars
dimensions are standardized by API 7 Specifications.The ISO 10407 Spec. is actually a draft.
- DRILL COLLAR TYPES
- Smooth
- Spiral
"Eni Best Practices" policy requiresto use only "Spiral Drill Collars"instead of the "Smooth" type".
-
8/13/2019 Heavy Wall Dp & Drill Collars
5/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 5
- DRILL COLLAR CHARACTERISTICS
Sizes and Dimensions (API 7)
D.C. Connection Dimensions
Mechanical characteristics
- Sizes and Dimensions (API 7)
Drill Collars are furnished in the sizes and dimensions shown in table .
-
8/13/2019 Heavy Wall Dp & Drill Collars
6/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 6
- D.C. Connection Dimensions
All drill collars connections must have stress relieve/bore back features in conformance with API 7.
-
8/13/2019 Heavy Wall Dp & Drill Collars
7/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 7
- Mechanical characteristics
-
8/13/2019 Heavy Wall Dp & Drill Collars
8/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 8
- BENDING STRENGTH RATIO CALCULATION
- Calculation
- Optimal Bending Strength Ratio
Bending ratio is calculatedknowing the type of thread andmeasuring, at a specific pointshown in the picture, the ID
andOD.For every table of determined ID,with OD we can cross the threadline and see the strength ratio onthe horizontal
axis.
-
8/13/2019 Heavy Wall Dp & Drill Collars
9/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 9
- DRILL COLLAR THREADS FEATURES
- Treatments
-
8/13/2019 Heavy Wall Dp & Drill Collars
10/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 10
- Features
- Boreback box and pin stress features. Force loading on box and pin connections for reducingstress concentrations.- Low
torque features. Reduction of contact surface in order to reduce the make up torque on 8.5/8regular connections
- Low torque features. Reduction of contact surface in order to reduce the make up torque on 8.5/8 regular connections.
28.3 DRILL STEM SUBS
- Cross-over examples
-
8/13/2019 Heavy Wall Dp & Drill Collars
11/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 1
- Schematic drawings
- Float Valve Recess in Bit Subs
-
8/13/2019 Heavy Wall Dp & Drill Collars
12/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
apirigroup.com/heavy_wall_dp_drill_collars.html 12
Table 12 Float Valve Recess in Bit Subs
Diameter ofValveAssembly
Diameter ofFloatRecess
Length ofValveAssembly
API Reg. BitBox
Ather PopularConnections
DR +/ 1/64 0(D +/-
1/32)L Size
A +/-
1/16Size A +/- 1/16
3 1/8 3 5/32 10 - - NC38 14 1/4
3 5/32 3 1/2 8 5/164
1/212 13/16 NC44 13 1/16
3 21/32 3 11/16 12 - - NC46 16 3/4
3 7/8 3 29/32 9 3/45
1/214 3/4 NC50 14 1/2
4 25/32 4 13/16 11 3/46
5/8
17 5 1/2 IF 17
- - -7
5/817 1/4 5 1/2 FH 17
- - -8
5/817 3/8 NC61 17 1/2
5 11/16 5 23/32 14 5/88
5/820 1/4 6 5/8 IF 19 7/8
28.4 LIFT SUBS
- Lift Subs (Type D)
-
8/13/2019 Heavy Wall Dp & Drill Collars
13/13
11/25/13 HEAVY WALL DP & DRILL COLLARS
28.5 INSPECTIONS
Hewi wate, Drill collars, Short Drill Collars, Stem Sibs shall be inspected according to API RP 7Gand API RP 5A5. Therelevant ISO standard is the 10407 Spec.ENI requirements are defined by internal specification.DS1 and NS2 are new
standardizations issued by independent body.
- DC Inspections from API RP7G
API RECOMMENED PRATICE 7G
13.4 DRILL COLLAR INSOECTION PROCEDURE
The following inspection procedure for used drill collars is recommended:
a. Visually inspect full length to determine obvious damage and overall condition.
b. Measure OD and ID of both ends.