heidra 80 hydraulic submersible pump heidra 80 · 2015-09-01 · cast iron to bs1452 grade 220....
TRANSCRIPT
Picture1
Features Specifications Inlet diameter 75 mm with strainer
Discharge connection 3" BSP (F)
Max capacity 70 m³/hr Max Head 25 metres
Solids handling 40 mm
Impeller diameter 165 mm Max operating temp 80 °C
Max working pressure 3.0 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 4.5 Pressure (bar)
Max operating speed 2400 rpm
Fuel tank capacity 72 litres
Heidra 80 Hydraulic Submersible Pump
Heid
ra 8
0Fuel consumption (BEP) 3.3 kW @ 2000 rpm
he Godwin Heidra 80 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 3'' hydraulic pump end. With variable speed diesel engine power, the Heidra 80 can meet a variety of flow and head requirements up to 70 m³/hr and total dynamic head requirements up to 25 metres.
It has the ability to handle solids up to 40 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 1.0 litres/hour
75 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Hard faced mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows easy connection to plug directly into bearing bracket.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU15 Pump endEngine : Kubota Z482 (4.5 kW @ 2000 rpm) Drive pressure 175 Pressure (bar)
Engine speed 2000 rpm Pump speed 2200 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 14 cc/rev Hydraulic motor displacement 12 cc/rev
Output flow 30 l/min Flow 30 l/min
Wet weight 900 kg Wet Weight 70 kg
Hydraulic reservoir capacity 40 litres
Power pack dimensions Pump end dimensionsLength 1300 mm Length 400 mm
Width 680 mm Width 354 mm
Height 1900 mm Height 558 mm
Drawing1
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m64 61 5465 61 5466 64 55
Maximum hose lengthsEngine (rpm) 1600 1800 2000 2200
Max Length (mtrs) 100 80 70 60
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 8
0
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Carbon vs SiCMechanical Seal Faces
18001500
Feed/Return
Bleed Line
13 mm (½") BSP x 16 mm (5/8") NB pipe.
10 mm (⅜") BSP x 6 mm (⅜") NB pipe.Kubota
Z482 Hushpac
Engine PUMP
2000 (1960) rpm
1800 (1764) rpm
1600 (1568) rpm
Minimum capacity limitation
2200 (2156) rpm
0
10
20
30
40
50
60
70
80
0 30 60 90 120 150 180 210 240 270
0
5
10
15
20
25
0 6 12 18 24 30 36 42 48 54 60 66 72 78
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 80 Kubota Z482
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture A
Features Specifications Inlet diameter 75 mm with strainer
Discharge connection 3" BSP (F)
Max capacity 70 m³/hr Max Head 25 metres
Solids handling 40 mm
Impeller diameter 165 mm Max operating temp 80 °C
Max working pressure 3.0 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 4.5 Pressure (bar)
Max operating speed 2400 rpm
Fuel tank capacity 116 litres
Heidra 80 Hydraulic Submersible Hushpac
Heid
ra 8
0Fuel consumption (BEP) 3.3 kW @ 2000 rpm
he Godwin Heidra 80 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 3'' hydraulic pump end. With variable speed diesel engine power, the Heidra 80 can meet a variety of flow and head requirements up to 70 m³/hr and total dynamic head requirements up to 25 metres.
It has the ability to handle solids up to 40 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 1.0 litres/hour
75 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Hard faced mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows easy connection to plug directly into bearing bracket.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU15 Pump endEngine : Kubota Z482 (5 kW @ 2000 rpm) Drive pressure 175 Pressure (bar)
Engine speed 2000 rpm Pump speed 2200 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 14 cc/rev Hydraulic motor displacement 12 cc/rev
Output flow 30 l/min Flow 30 l/min
Wet weight 900 kg Wet Weight 70 kg
Hydraulic reservoir capacity 40 litres
Hushpac dimensions Pump end dimensionsLength 1785 mm Length 400 mm
Width 840 mm Width 354 mm
Height 1515 mm Height 558 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m64 61 5465 61 5466 64 55
Maximum hose lengthsEngine (rpm) 1600 1800 2000 2200
Max Length (mtrs) 100 80 70 60
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 8
0
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Carbon vs SiCMechanical Seal Faces
18001500
Feed/Return
Bleed Line
13 mm (½") BSP x 16 mm (5/8") NB pipe.
10 mm (⅜") BSP x 6 mm (⅜") NB pipe.Kubota
Z482 Hushpac
Engine PUMP
2000 (1960) rpm
1800 (1764) rpm
1600 (1568) rpm
Minimum capacity limitation
2200 (2156) rpm
0
10
20
30
40
50
60
70
80
0 30 60 90 120 150 180 210 240 270
0
5
10
15
20
25
0 6 12 18 24 30 36 42 48 54 60 66 72 78
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 80 Kubota Z482
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture3
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 4" BSP (F)
Max capacity 209 m³/hr Max Head 30 metres
Solids handling 45 mm
Impeller diameter 230 mm Max operating temp 80 °C
Max working pressure 3.1 Pressure (bar)
Max suction pressure 2.5 Pressure (bar) Max casing pressure 4.7 Pressure (bar)
Max operating speed 2300 rpm
Fuel tank capacity 72 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 100 Hydraulic Submersible Pump
Heid
ra 1
00Fuel consumption (BEP) 11.7 kW @ 2000 rpm
he Godwin Heidra 100 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4'' hydraulic pump end. With variable speed diesel engine power, the Heidra 100 can meet a variety of flow and head requirements up to 209 m³/hr and total dynamic head requirements up to 30 metres.
It has the ability to handle solids up to 45 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 3.3 litres/hour
100 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU10 Pump endEngine : Perkins 403D-15 (16.5 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1700 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 15 cc/rev Hydraulic motor displacement 15 cc/rev
Output flow 28 l/min Flow 28 l/min
Wet weight 945 kg Wet Weight 75 kg
Hydraulic reservoir capacity 40 litres
Power pack dimensions Pump end dimensionsLength 1300 mm Length 485 mm
Width 680 mm Width 420 mm
Height 1900 mm Height 581 mm
Drawing3
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m71 66 6379 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1800 2000 2200 2400
Max Length (mtrs) 100 80 70 60
Feed/Return
Bleed Line
13 mm (½") BSP x 16 mm (⅝") NB pipe.
10 mm (⅜") BSP x 10 mm (⅜") NB pipe. Perkins
403D-15 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2000
Cast Steel BS 3100:1991 A5 Harness 200 HB.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001200
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
00
Cast Iron to BS1452 Grade 220.
Carbon Steel BS 970-3:1991 080M41
Speed(rpm)
1800 (1683) rpm
1600 (1496) rpm
Minimum capacity limitation
2000 (1870) rpm
0
20
40
60
80
100
0 100 200 300 400 500 600 700 800
0
5
10
15
20
25
30
35
0 25 50 75 100 125 150 175 200 225
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 100 Perkins 403D-15
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture5
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 4" BSP (F)
Max capacity 226 m³/hr Max Head 42 metres
Solids handling 35 mm
Impeller diameter 256 mm Max operating temp 80 °C
Max working pressure 4.5 Pressure (bar)
Max suction pressure 4.0 Pressure (bar) Max casing pressure 6.7 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 170 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 100NC Hydraulic Submersible Pump
Heid
ra 1
00N
CFuel consumption (BEP) 19.8 kW @ 2000 rpm
he Godwin Dri-Prime® Heidra 100NC pump is an extremely powerful yet compact pump with flow capabilities to 226 m³/hr and discharge heads to 42 metres.
The Heidra 100NC features the unique patented N-technology with its innovative self-cleaning impeller. Godwin N-pumps deliver the highest total efficiency. It lowers your fuel bill and reduces unplanned maintenance costs. Able to perform in the toughest conditions, the Heidra 100NC can handle solids up to 35 mm in diameter. This makes it an extremely effective pump, suitable for both sewage and clean water applications. The powerful Heidra 100NC has proven itself a pump of choice when pumping stringy material and general dewatering applications.
Incorporates high efficiency N-Pump technology. 6.1 litres/hour
100 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Non clog impeller and chopper wearplate is specifically designed to chop stringy materials when pumping.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU15 Pump endEngine : Perkins 404D-22 (25.1 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1970 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 28 cc/rev
Output flow 60 l/min Flow 60 l/min
Wet weight 1,052 kg Wet Weight 135 kg
Hydraulic reservoir capacity 65 litres
Power pack dimensions Pump end dimensionsLength 1800 mm Length 402 mm
Width 520 mm Width 340 mm
Height 570 mm Height 745 mm
0
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m71 66 6374 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 13 mm (½") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2200
Hard Iron
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001200
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
00N
C
Rear - Cast iron BS1452 Gr220Front - Hard ironCarbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1929) rpm
1800 (1736) rpm
1600 (1543) rpm
1400 (1350) rpm
Minimum capacity limitation
2200 (2121) rpm
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800 900
0
10
20
30
40
50
0 25 50 75 100 125 150 175 200 225 250
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 100NC Perkins 404D-22
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture E
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 4" BSP (F)
Max capacity 225 m³/hr Max Head 42 metres
Solids handling 35 mm
Impeller diameter 256 mm Max operating temp 80 °C
Max working pressure 4.5 Pressure (bar)
Max suction pressure 4.0 Pressure (bar) Max casing pressure 6.7 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 180 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 100NC Hydraulic Submersible Hushpac
Heid
ra 1
00N
CFuel consumption (BEP) 19.8 kW @ 2000 rpm
he Godwin Dri-Prime® Heidra 100NC pump is an extremely powerful yet compact pump with flow capabilities to 226 m³/hr and discharge heads to 42 metres.
The Heidra 100NC features the unique patented N-technology with its innovative self-cleaning impeller. Godwin N-pumps deliver the highest total efficiency. It lowers your fuel bill and reduces unplanned maintenance costs. Able to perform in the toughest conditions, the Heidra 100NC can handle solids up to 35 mm in diameter. This makes it an extremely effective pump, suitable for both sewage and clean water applications. The powerful Heidra 100NC has proven itself a pump of choice when pumping stringy material and general dewatering applications.
Incorporates high efficiency N-Pump technology. 6.1 litres/hour
100 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Non clog impeller and chopper wearplate is specifically designed to chop stringy materials when pumping.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 404D-22 (25 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1970 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 28 cc/rev
Output flow 60 l/min Flow 60 l/min
Wet weight 1,200 kg Wet Weight 135 kg
Hydraulic reservoir capacity 65 litres
Hushpac dimensions Pump end dimensionsLength 2190 mm Length 402 mm
Width 1050 mm Width 340 mm
Height 1800 mm Height 745 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m71 66 6374 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 13 mm (½") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2200
Hard Iron
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001200
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
00N
C
Rear - Cast iron BS1452 Gr220Front - Hard ironCarbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1929) rpm
1800 (1736) rpm
1600 (1543) rpm
1400 (1350) rpm
Minimum capacity limitation
2200 (2121) rpm
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800 900
0
10
20
30
40
50
0 25 50 75 100 125 150 175 200 225 250
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 100NC Perkins 404D-22
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture D
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 4" BSP (F)
Max capacity 175 m³/hr Max Head 36 metres
Solids handling 45 mm
Impeller diameter 230 mm Max operating temp 80 °C
Max working pressure 4.0 Pressure (bar)
Max suction pressure 2.5 Pressure (bar) Max casing pressure 6.0 Pressure (bar)
Max operating speed 2300 rpm
Fuel tank capacity 158 litres
Heidra 100 TD Hydraulic Submersible Hushpac
Heid
ra 1
00 TD
Fuel consumption (BEP) 8.5 kW @ 1800 rpm
he Godwin Heidra 100 TD hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4'' hydraulic pump end. With variable speed diesel engine power, the Heidra 100 TD can meet a variety of flow and head requirements up to 175 m³/hr and total dynamic head requirements up to 36 metres.
It has the ability to handle solids up to 45 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 2.5 litres/hour
100 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU10 Pump endEngine : Perkins 403D-15 (15 kW @ 1800 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1700 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 15 cc/rev Hydraulic motor displacement 15 cc/rev
Output flow 28 l/min Flow 28 l/min
Wet weight 1,050 kg Wet Weight 75 kg
Hydraulic reservoir capacity 40 litres
Hushpac dimensions Pump end dimensionsLength 2330 mm Length 485 mm
Width 1205 mm Width 420 mm
Height 2111 mm Height 581 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m71 66 6279 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1800 2000 2200 2400
Max Length (mtrs) 100 80 70 60
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
00 TD
Cast Iron to BS1452 Grade 220.Carbon Steel BS 970-3:1991 080M41
Speed(rpm)
Cast iron to BS1452 Grade 220.
2300
Cast Steel BS 3100:1991 A5 Harness 200 HB.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
20001200
Feed/Return
Bleed Line
13 mm (½") BSP x 16 mm (⅝") NB pipe.
10 mm (⅜") BSP x 10 mm (⅜") NB pipe. Perkins
403D-15 Hushpac
Engine PUMP
1800 (1683) rpm
1600 (1496) rpm
Minimum capacity limitation
2000 (1870) rpm
0
20
40
60
80
100
0 100 200 300 400 500 600 700 800
0
5
10
15
20
25
30
35
0 25 50 75 100 125 150 175 200 225
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 100 TD Perkins 403D-15
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture D
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 4" BSP (F)
Max capacity 205 m³/hr Max Head 60 metres
Solids handling 75 mm
Impeller diameter 258 mm Max operating temp 80 °C
Max working pressure 5.0 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 7.5 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 180 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 103 Hydraulic Submersible Hushpac
Heid
ra 1
03Fuel consumption (BEP) 19.5 kW @ 1800 rpm
he Godwin Heidra 103 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4'' hydraulic pump end. With variable speed diesel engine power, the Heidra 103 can meet a variety of flow and head requirements up to 205 m³/hr and total dynamic head requirements up to 60 metres.
It has the ability to handle solids up to 75 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 5.7 litres/hour
100 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU15 Pump endEngine : Perkins 404D-22 (23 kW @ 1800 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2200 rpm Pump speed 2000 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 30 cc/rev
Output flow 50 l/min Flow 50 l/min
Wet weight 1,300 kg Wet Weight 130 kg
Hydraulic reservoir capacity 80 litres
Hushpac dimensions Pump end dimensionsLength 2190 mm Length 500 mm
Width 1050 mm Width 514 mm
Height 1800 mm Height 647 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m72 67 6475 70 6577 71 66
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 16 mm (⅝") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2400
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
03
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1960) rpm
1800 (1764) rpm
1600 (1568) rpm
Minimum capacity limitation
2200 (2156) rpm
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800
0
10
20
30
40
50
60
0 20 40 60 80 100 120 140 160 180 200 220 240
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 103 Perkins 404D-22T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture3
Features Specifications Inlet diameter 100 mm with strainer
Discharge connection 4" BSP (F)
Max capacity 205 m³/hr Max Head 60 metres
Solids handling 75 mm
Impeller diameter 258 mm Max operating temp 80 °C
Max working pressure 5.0 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 7.5 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 180 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 103 Hydraulic Submersible Pump
Heid
ra 1
03Fuel consumption (BEP) 35.6 kW @ 2200 rpm
he Godwin Heidra 103 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 4'' hydraulic pump end. With variable speed diesel engine power, the Heidra 103 can meet a variety of flow and head requirements up to 205 m³/hr and total dynamic head requirements up to 60 metres.
It has the ability to handle solids up to 75 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 10.8 litres/hour
100 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU15 Pump endEngine : Perkins 404D-22T (32.7 kW @ 2200 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2200 rpm Pump speed 2000 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 30 cc/rev
Output flow 50 l/min Flow 50 l/min
Wet weight 1,136 kg Wet Weight 130 kg
Hydraulic reservoir capacity 80 litres
Power pack dimensions Pump end dimensionsLength 1800 mm Length 500 mm
Width 1000 mm Width 514 mm
Height 1900 mm Height 647 mm
Drawing4
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m72 67 6475 70 6577 71 66
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 16 mm (⅝") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2400
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
03
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1960) rpm
1800 (1764) rpm
1600 (1568) rpm
Minimum capacity limitation
2200 (2156) rpm
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800
0
10
20
30
40
50
60
0 20 40 60 80 100 120 140 160 180 200 220 240
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 103 Perkins 404D-22T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture E
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 405 m³/hr Max Head 27 metres
Solids handling 65 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 3.5 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 3.2 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 180 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150 Hydraulic Submersible Hushpac
Heid
ra 1
50Fuel consumption (BEP) 10.1 kW @ 2000 rpm
he Godwin Heidra 150 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150 can meet a variety of flow and head requirements up to 405 m³/hr and total dynamic head requirements up to 27 metres.
It has the ability to handle solids up to 65 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 3.8 litres/hour
150 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 404D-22 (25 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1420 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 35 cc/rev
Output flow 50 l/min Flow 50 l/min
Wet weight 1,200 kg Wet Weight 152 kg
Hydraulic reservoir capacity 65 litres
Hushpac dimensions Pump end dimensionsLength 2190 mm Length 680 mm
Width 1050 mm Width 520 mm
Height 1800 mm Height 570 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m71 66 6374 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 13 mm (½") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001200
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1340) rpm
1800 (1206) rpm
1600 (1072) rpm
Minimum capacity limitation
2200 (1474) rpm
0
10
20
30
40
50
60
70
80
0 200 400 600 800 1000 1200 1400 1600
0
2
4
6
8
10
12
14
16
18
20
22
24
0 50 100 150 200 250 300 350 400 450
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150 Perkins 404D-22
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture5
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 405 m³/hr Max Head 27 metres
Solids handling 65 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 3.5 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 3.2 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 170 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150 Hydraulic Submersible Pump
Heid
ra 1
50Fuel consumption (BEP) 10.1 kW @ 2000 rpm
he Godwin Heidra 150 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150 can meet a variety of flow and head requirements up to 405 m³/hr and total dynamic head requirements up to 27 metres.
It has the ability to handle solids up to 65 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 3.8 litres/hour
150 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 404D-22 (25.1 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1420 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 30 cc/rev Hydraulic motor displacement 35 cc/rev
Output flow 50 l/min Flow 50 l/min
Wet weight 1,052 kg Wet Weight 152 kg
Hydraulic reservoir capacity 65 litres
Power pack dimensions Pump end dimensionsLength 1800 mm Length 680 mm
Width 520 mm Width 520 mm
Height 570 mm Height 570 mm
Drawing6
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m71 66 6374 69 6476 70 65
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Feed/Return
Bleed Line
19 mm (¾") BSP x 19 mm (¾") NB pipe.
10 mm (⅜") BSP x 13 mm (½") NB pipe. Perkins
404D-22 Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001200
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1340) rpm
1800 (1206) rpm
1600 (1072) rpm
Minimum capacity limitation
2200 (1474) rpm
0
10
20
30
40
50
60
70
80
0 200 400 600 800 1000 1200 1400 1600
0
2
4
6
8
10
12
14
16
18
20
22
24
0 50 100 150 200 250 300 350 400 450
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150 Perkins 404D-22
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture E
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 510 m³/hr Max Head 56 metres
Solids handling 65 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 5.0 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 7.5 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 340 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150MR Hydraulic Submersible Hushpac
Heid
ra 1
50M
RFuel consumption (BEP) 36.8 kW @ 1800 rpm
he Godwin Heidra 150MR hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150MR can meet a variety of flow and head requirements up to 510 m³/hr and total dynamic head requirements up to 56 metres.
It has the ability to handle solids up to 65 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 11.7 litres/hour
150 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54 kW @ 1800 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1964 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 55 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,500 kg Wet Weight 142 kg
Hydraulic reservoir capacity 200 litres
Hushpac dimensions Pump end dimensionsLength 2890 mm Length 680 mm
Width 1300 mm Width 520 mm
Height 1800 mm Height 570 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m71 64 6475 68 6580 79 77
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001200
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50M
R
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
1800 (1924) rpm
1600 (1711) rpm
Minimum capacity limitation
2000 (2138) rpm
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
0 200 400 600 800 1000 1200 1400 1600 1800
0
5
10
15
20
25
30
35
40
45
0 50 100 150 200 250 300 350 400 450 500
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150MR Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture5
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 510 m³/hr Max Head 56 metres
Solids handling 65 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 3.9 Pressure (bar)
Max suction pressure 1.7 Pressure (bar) Max casing pressure 5.9 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 390 litres
Heidra 150MR Hydraulic Submersible Pump
Heid
ra 1
50M
RFuel consumption (BEP) 50.5 kW @ 2000 rpm
he Godwin Heidra 150MR hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150MR can meet a variety of flow and head requirements up to 510 m³/hr and total dynamic head requirements up to 56 metres.
It has the ability to handle solids up to 65 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 15.6 litres/hour
150 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54.7 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1964 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 55 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,250 kg Wet Weight 142 kg
Hydraulic reservoir capacity 200 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 680 mm
Width 1300 mm Width 520 mm
Height 1900 mm Height 570 mm
Drawing5
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m71 64 6475 68 6580 79 77
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50M
R
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2200
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001200
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
1900 (2031) rpm
1800 (1924) rpm
1700 (1817) rpm
1600 (1711) rpm
Minimum capacity limitation
2000 (2138) rpm
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
0 200 400 600 800 1000 1200 1400 1600 1800
0
5
10
15
20
25
30
35
40
45
0 50 100 150 200 250 300 350 400 450 500
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150MR Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture5
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 385 m³/hr Max Head 56 metres
Solids handling 42 mm
Impeller diameter 286 mm Max operating temp 80 °C
Max working pressure 5.7 Pressure (bar)
Max suction pressure 4.0 Pressure (bar) Max casing pressure 8.5 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 390 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150NC Hydraulic Submersible Pump
Heid
ra 1
50N
CFuel consumption (BEP) 48.2 kW @ 2000 rpm
he Godwin Dri-Prime® Heidra 150NC pump is an extremely powerful yet compact pump with flow capabilities to 386 m³/hr and discharge heads to 56 metres.
The Heidra 150NC features the unique patented N-technology with its innovative self-cleaning impeller. Godwin N-pumps deliver the highest total efficiency. It lowers your fuel bill and reduces unplanned maintenance costs. Able to perform in the toughest conditions, the Heidra 150NC can handle solids up to 42 mm in diameter. This makes it an extremely effective pump, suitable for both sewage and clean water applications. The powerful Heidra 150NC has proven itself a pump of choice when pumping stringy material and general dewatering applications.
Incorporates high efficiency N-Pump technology. 15.0 litres/hour
150 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Non clog impeller and chopper wearplate is specifically designed to chop stringy materials when pumping.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54.7 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1964 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 55 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,250 kg Wet Weight 155 kg
Hydraulic reservoir capacity 200 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 458 mm
Width 1300 mm Width 579 mm
Height 1900 mm Height 728 mm
0
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m72 67 6475 70 6577 71 66
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2400
Hard Iron
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50N
C
Rear - Cast iron BS1452 Gr220Front - Hard ironCarbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1929) rpm
1800 (1736) rpm
1600 (1543) rpm
1400 (1350) rpm
Minimum capacity limitation
2200 (2121) rpm
0
20
40
60
80
100
120
140
160
180
200
220
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
0
10
20
30
40
50
60
70
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150NC Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture E
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 385 m³/hr Max Head 56 metres
Solids handling 42 mm
Impeller diameter 286 mm Max operating temp 80 °C
Max working pressure 5.7 Pressure (bar)
Max suction pressure 4.0 Pressure (bar) Max casing pressure 8.5 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 340 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150NC Hydraulic Submersible Hushpac
Heid
ra 1
50N
CFuel consumption (BEP) 35.1 kW @ 1800 rpm
he Godwin Dri-Prime® Heidra 150NC pump is an extremely powerful yet compact pump with flow capabilities to 386 m³/hr and discharge heads to 56 metres.
The Heidra 150NC features the unique patented N-technology with its innovative self-cleaning impeller. Godwin N-pumps deliver the highest total efficiency. It lowers your fuel bill and reduces unplanned maintenance costs. Able to perform in the toughest conditions, the Heidra 150NC can handle solids up to 42 mm in diameter. This makes it an extremely effective pump, suitable for both sewage and clean water applications. The powerful Heidra 150NC has proven itself a pump of choice when pumping stringy material and general dewatering applications.
Incorporates high efficiency N-Pump technology. 11.3 litres/hour
150 mm bauer discharge connection. The quick release lever allows pipe work to be connected & disconnected very easily. Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Non clog impeller and chopper wearplate is specifically designed to chop stringy materials when pumping.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54 kW @ 1800 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1964 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 55 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,500 kg Wet Weight 155 kg
Hydraulic reservoir capacity 200 litres
Hushpac dimensions Pump end dimensionsLength 2890 mm Length 458 mm
Width 1300 mm Width 579 mm
Height 1800 mm Height 728 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m72 67 6475 70 6577 71 66
Maximum hose lengthsEngine (rpm) 2000 2200 2400 2600
Max Length (mtrs) 40 35 30 20
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2400
Hard Iron
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
18001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50N
C
Rear - Cast iron BS1452 Gr220Front - Hard ironCarbon Steel BS 970-3:1991 080M40
Speed(rpm)
2000 (1929) rpm
1800 (1736) rpm
1600 (1543) rpm
1400 (1350) rpm
Minimum capacity limitation
2200 (2121) rpm
0
20
40
60
80
100
120
140
160
180
200
220
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
0
10
20
30
40
50
60
70
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150NC Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture5
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 445 m³/hr Max Head 30 metres
Solids handling 125 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 4.0 Pressure (bar)
Max suction pressure 2.0 Pressure (bar) Max casing pressure 6.0 Pressure (bar)
Max operating speed 2400 rpm
Fuel tank capacity 390 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150V Hydraulic Submersible Pump
Heid
ra 1
50V
Fuel consumption (BEP) 41.8 kW @ 2000 rpm
he Godwin Heidra 150V hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150V can meet a variety of flow and head requirements up to 445 m³/hr and total dynamic head requirements up to 30 metres.
The Heidra 150V has the ability to handle solids to 125 mm in diameter, stringy materials, slurries with entrained gases. It also has dry running capabilities and a cast chromium steel impeller. The pump is designed to pass through a standard 24'' manhole making it ideal for sewer bypass applications.
Open solid handling impellers with replaceable wearplates. 13.4 litres/hour
Fully recessed vortex impeller will handle solids up to 125 mm in diameter.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (54.7 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1860 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 60 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,250 kg Wet Weight 161 kg
Hydraulic reservoir capacity 200 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 577 mm
Width 1300 mm Width 514 mm
Height 1900 mm Height 816 mm
Drawing7
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m72 65 6576 69 6679 78 76
Maximum hose lengthsEngine (rpm) 1400 1600 1800 2000
Max Length (mtrs) 80 70 60 50
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2000
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50V
Cast Iron to BS1452 Grade 220.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
1800 (1688) rpm
1500 (1407) rpm
Minimum capacity limitation
2000 (1876) rpm
0
10
20
30
40
50
60
70
80
90
0 200 400 600 800 1000 1200 1400 1600 1800
0
5
10
15
20
25
30
0 50 100 150 200 250 300 350 400 450 500
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150V Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture G
Features Specifications Inlet diameter 150 mm with strainer
Discharge connection 6" BSP (F)
Max capacity 445 m³/hr Max Head 30 metres
Solids handling 125 mm
Impeller diameter 280 mm Max operating temp 80 °C
Max working pressure 4.0 Pressure (bar)
Max suction pressure 2.0 Pressure (bar) Max casing pressure 6.0 Pressure (bar)
Max operating speed 2400 rpm
Fuel tank capacity 340 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 150V Hydraulic Submersible Hushpac
Heid
ra 1
50V
Fuel consumption (BEP) 41.8 kW @ 2000 rpm
he Godwin Heidra 150V hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 6'' hydraulic pump end. With variable speed diesel engine power, the Heidra 150V can meet a variety of flow and head requirements up to 445 m³/hr and total dynamic head requirements up to 30 metres.
The Heidra 150V has the ability to handle solids to 125 mm in diameter, stringy materials, slurries with entrained gases. It also has dry running capabilities and a cast chromium steel impeller. The pump is designed to pass through a standard 24'' manhole making it ideal for sewer bypass applications.
Open solid handling impellers with replaceable wearplates. 13.4 litres/hour
Fully recessed vortex impeller will handle solids up to 125 mm in diameter.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU30 Pump endEngine : Perkins 1104D-44T (55 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1860 rpm
Hydraulic motor Gear type Hydraulic motor Gear type
Hydraulic pump displacement 60 cc/rev Hydraulic motor displacement 60 cc/rev
Output flow 100 l/min Flow 100 l/min
Wet weight 2,250 kg Wet Weight 161 kg
Hydraulic reservoir capacity 200 litres
Hushpac dimensions Pump end dimensionsLength 2890 mm Length 577 mm
Width 1300 mm Width 514 mm
Height 1800 mm Height 816 mm
0
Hydraulic Hose Acoustic information
1 m 3 m 7 m72 65 6576 69 6679 78 76
Maximum hose lengthsEngine (rpm) 1400 1600 1800 2000
Max Length (mtrs) 80 70 60 50
Feed/Return
Bleed Line
25 mm (1") BSP x 25 mm (1") NB pipe.
13 mm (½") BSP x 13 mm (½") NB pipe. Perkins
1104D-44T Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
2000
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001400
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 1
50V
Cast Iron to BS1452 Grade 220.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
1800 (1688) rpm
1500 (1407) rpm
Minimum capacity limitation
2000 (1876) rpm
0
10
20
30
40
50
60
70
80
90
0 200 400 600 800 1000 1200 1400 1600 1800
0
5
10
15
20
25
30
0 50 100 150 200 250 300 350 400 450 500
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 150V Perkins 1104D-44T
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture8
Features Specifications Inlet diameter 200 mm with strainer
Discharge connection 200 mm (8" BS10 Table 'D')
Max capacity 750 m³/hr Max Head 50 metres
Solids handling 75 mm
Impeller diameter 290 mm Max operating temp 80 °C
Max working pressure 5.5 Pressure (bar)
Max suction pressure 1.5 Pressure (bar) Max casing pressure 8.3 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 390 litres
Heidra 200 Hydraulic Submersible Pump
Heid
ra 2
00Fuel consumption (BEP) 57.7 kW @ 2000 rpm
he Godwin Heidra 200 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 8'' hydraulic pump end. With variable speed diesel engine power, the Heidra 200 can meet a variety of flow and head requirements up to 750 m³/hr and total dynamic head requirements up to 50 metres.
It has the ability to handle solids up to 75 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 18.4 litres/hour
Bearings are independent from the hydraulic gear motor – pump loads in no way affect gear motor performance.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU50 Pump endEngine : Perkins 1104D-E44TA (74.1 kW @ 2000 rpm) Drive pressure 250 Pressure (bar)
Engine speed 2000 rpm Pump speed 1940 rpm
Hydraulic motor Piston Hydraulic motor Piston
Hydraulic pump displacement 100 cc/rev Hydraulic motor displacement 100 cc/rev
Output flow 190 l/min Flow 190 l/min
Wet weight 2,250 kg Wet Weight 354 kg
Hydraulic reservoir capacity 300 litres
Power pack dimensions Pump end dimensionsLength 2500 mm Length 755 mm
Width 1300 mm Width 721 mm
Height 1900 mm Height 1250 mm
Drawing8
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m72 65 6576 69 6679 78 76
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 2
00
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M40
Speed(rpm)
Cast iron to BS1452 Grade 220.
2000
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
15001400
Feed/Return
Bleed Line
32 mm (1¼") Quick Disconnect.
13 mm (½") Quick Disconnect. Perkins 1104D-E44TA
Hushpac
Engine PUMP
1800 (1710) rpm
1600 (1520) rpm
Minimum capacity limitation
2000 (1900) rpm
0
20
40
60
80
100
120
140
160
0 400 800 1200 1600 2000 2400 2800
0
10
20
30
40
50
0 100 200 300 400 500 600 700 800
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 200 Perkins 1104D-E44TA
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture9
Features Specifications Inlet diameter 250 mm with strainer
Discharge connection 250 mm (10" BS10 Table 'D')
Max capacity 765 m³/hr Max Head 55 metres
Solids handling 75 mm
Impeller diameter 290 mm Max operating temp 80 °C
Max working pressure 5.5 Pressure (bar)
Max suction pressure 1.5 Pressure (bar) Max casing pressure 8.3 Pressure (bar)
Max operating speed 2200 rpm
Fuel tank capacity 850 litres
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
Heidra 250 Hydraulic Submersible Pump
Heid
ra 2
50Fuel consumption (BEP) 73.2 kW @ 2100 rpm
he Godwin Heidra 250 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 10'' hydraulic pump end. With variable speed diesel engine power, the Heidra 250 can meet a variety of flow and head requirements up to 765 m³/hr and total dynamic head requirements up to 55 metres.
It has the ability to handle solids up to 75 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 26.9 litres/hour
Bearings are independent from the hydraulic gear motor – pump loads in no way affect gear motor performance.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard seal: silicon carbide. Outboard seal: carbon or ceramic.Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU50 Pump endEngine : Perkins 1106D-E66TA (129) (102.8 kW @ 2100 rpm) Drive pressure 300 Pressure (bar)
Engine speed 2100 rpm Pump speed 2050 rpm
Hydraulic motor Fixed Piston Hydraulic motor Fixed Piston
Hydraulic pump displacement 100 cc/rev Hydraulic motor displacement 100 cc/rev
Output flow 190 l/min Flow 190 l/min
Wet weight 2,598 kg Wet Weight 362 kg
Hydraulic reservoir capacity 300 litres
Power pack dimensions Pump end dimensionsLength 2950 mm Length 765 mm
Width 1300 mm Width 740 mm
Height 1900 mm Height 1250 mm
Drawing9
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m0 0 00 0 00 0 0
Maximum hose lengthsEngine (rpm) 1500 1800 2000 2200
Max Length (mtrs) 50 40 35 30
Feed/Return
Bleed Line
32 mm (1¼") Quick Disconnect.
13 mm (½") Quick Disconnect. Perkins 1104D-E44TA
Hushpac
Engine PUMP
Cast iron to BS1452 Grade 220.
0
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Silicon Carbide vs Silicon Carbide
Mechanical Seal Faces
00
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 2
50
Cast Iron to BS1452 Grade 220 Nitrided.Carbon Steel BS 970-3:1991 080M41
Speed(rpm)
2000 (1960) rpm
1800 (1764) rpm
1600 (1568) rpm
1400 (1372) rpm
Minimum capacity limitation
2200 (2156) rpm
0
20
40
60
80
100
120
140
160
180
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
0
10
20
30
40
50
60
0 100 200 300 400 500 600 700 800
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 250 Perkins 1106D-E66TA (129)
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Picture10
Features Specifications Inlet diameter 300 mm with strainer
Discharge connection 300 mm (12" BS10 Table 'D')
Max capacity 1300 m³/hr Max Head 58 metres
Solids handling 95 mm
Impeller diameter 362 mm Max operating temp 80 °C
Max working pressure 6.0 Pressure (bar)
Max suction pressure 4.0 Pressure (bar) Max casing pressure 9.0 Pressure (bar)
Max operating speed 1800 rpm
Fuel tank capacity 685 litres
Heidra 300 Hydraulic Submersible Pump
Heid
ra 3
00Fuel consumption (BEP) 150.2 kW @ 1800 rpm
he Godwin Heidra 300 hydraulic submersible pump is a compact self-contained pumping unit featuring a diesel driven power pack and 12'' hydraulic pump end. With variable speed diesel engine power, the Heidra 300 can meet a variety of flow and head requirements up to 1,300 m³/hr and total dynamic head requirements up to 58 metres.
It has the ability to handle solids up to 95 mm in diameter. It also has dry running capabilities, a cast chromium steel impeller, providing a rugged dewatering / solids handling, hydraulic submersible pump ready to go anywhere.
Open solid handling impellers with replaceable wearplates. 41.2 litres/hour
Bearings are independent from the hydraulic gear motor – pump loads in no way affect gear motor performance.
Double mechanical seal in its own clean oil bath allows for indefinite dry running. Inboard Sic v Sic Outboard Sic v Carbon.
Gear motor connections are standard two-bolt SAE flange & shaft. Which allows the bearing bracket to plug directly together.Standard impeller is designed for general pumping, slurries and sludges.
Safe pump end no risk of electric shock or explosion.
Alternative options available e.g. Highway trailer, Site trolley.
Simple and reliable operation, no valves & requires little maintenance.
T
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]
Performance Curve
Materials
Wearplates
Pump Shaft
Impeller
Power pack - GHPU90 Pump endEngine : Caterpillar C9 (205.0 kW @ 1800 rpm) Drive pressure 310 Pressure (bar)
Engine speed 1800 rpm Pump speed 1746 rpm
Hydraulic motor Axial Piston type Hydraulic motor Axial Piston type
Hydraulic pump displacement 180 cc/rev Hydraulic motor displacement 180 cc/rev
Output flow 320 l/min Flow 320 l/min
Wet weight 5,325 kg Wet Weight 945 kg
Hydraulic reservoir capacity 320 litres
Power pack dimensions Pump end dimensionsLength 3700 mm Length 1401 mm
Width 1700 mm Width 1052 mm
Height 2200 mm Height 1830 mm
Drawing10
Hydraulic Hose Acoustic information40YEAR
1 m 3 m 7 m0 0 00 0 00 0 0
Maximum hose lengthsEngine (rpm) 1200 1400 1600 1800
Max Length (mtrs) 50 40 30 20
Pump casing
Average Sound Pressure rating (dbA)
Heid
ra 3
00
High Chromium Cast Iron HC403:1977 Grade FR6252Nickel Chrome Steel to BS970 Grade M40 EN24T
Speed(rpm)
Cast iron to BS1452 Grade 220.
0
Cast Steel BS 3100:1991 Grade BW2.
Suction Strainer and Lifting Bracket
Fabrication Mild Steel tube and plate.
Double mechanical seal inboard Sic v Sic Outboard Sic v Carbon
Mechanical Seal Faces
00
Feed/Return
Bleed Line
38 mm (1½) N.B. Braided hose. Twin feed & return.
Low pressure 19 mm (¾") N.B. Perkins 1104D-E44TA
Hushpac
Engine PUMP
1600 (1568) rpm
1400 (1372) rpm
1200 (1176) rpm
Minimum capacity limitation
1800 (1764) rpm
0
20
40
60
80
100
120
140
160
180
200
220
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
0
10
20
30
40
50
60
70
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500
Head
(fee
t)
Flow (Gal/min)He
ad (m
etre
s)
Flow (m³/hr)
Engine (Pump) rpm
Heidra 300 Caterpillar C9
Assessed to ISO 9001:2008Certificate N° 1027
Jansen Pompentechniek T: +31(0)485-371318 E: [email protected]