hemablock r.a.p.i.d. application procedure
TRANSCRIPT
STOP the bleed
www.hemablock.com
5-Step R.A.P.I.D. Application Procedure
STOP the bleed
1. Remove 2. Apply 3. Pressure 4. Irrigate 4. Deliveredexcess blood. powder liberally
to the bleeders.on wound site
for 1 to 2 minutes.to visualize hemostasis.
hemostasis.
5-Step R.A.P.I.D. Application Procedure
STOP the bleed
1. Removeexcess blood.
• Remove excess blood to easily identify bleeders and allow applying HemaBlock Powder directly on the active bleeder.
STOP the bleed
2. Applypowder liberally to the bleeders.
• Apply plenty of HemaBlock Powder on the bleeder. Be sure to completely cover the bleeding area.
STOP the bleed
3. Pressureon wound site
for 1 to 2 minutes.
• Steady Pressure needs to be applied to stop the flow of the bleeders for approximately 1 to 2 minutes to allow time for HemaBlock Powder to create the clot.
STOP the bleed
4. Irrigateto visualize hemostasis.
• Irrigate the wound area with saline solution to remove excess powder to check for bleeders might have missed.
STOP the bleed
5. Deliveredhemostasis.
• Delivered hemostasis (clotting) is evident after irrigation and the wound site is ready for traditional closure methods.