hermle - laboline sentrifuugi.pdf · rcf ect.) can be stored and ... time may be set from 1 to 60...
TRANSCRIPT
Intelligent Centrifuges
For applications requiringhigh speed performance
or the ability to accomodateblood bags or a large varietyof different tube sizes, thecentrifuges Z 513 andZ 513K can handle the job.
The operating system ofthese centrifuges is based onadvanced, easy to use,microprocessor technologyand automatie rotor
recognition.
Flexible and intelligentThe LED on the front paneldisplays either rotor speed(in rpm) or g-force (RCF).If a speed is selected thatexceeds the instalied rotor's
max. rating, the centrifugewill automatically correctthe setting to the rotor'smax. speed withoutterminating the run. Thisimportant safety-featureeliminates the possibilityof over-speed.This feature for accurate
calculation and display ofg-force.
Program MemoryFor routine works the
Z 513 I Z 513K give you thepossibility to program andstore 10complete centrifugeruns. All parameters (speed,rcf ect.) can be stored andrecalled at the touch of a
button, saving valuable time.
Automatie lid lock
The lid needs only to be setgently when closing thecentrifuge. The motor drivenlid locking system thenfinishes the job. Thisinnovative feature adds to
the user friendly design.
Z513
The Z 513 is a universal, highcapacity bench top centri-fuge. A continuous air flowthrough the centrifugehousing prevents sampieheating and restricts sampietemperature from rising over12°C, even at max. speed.When the rotor is not
running an additionalventilating fan assists incooling process.
OperationThe ergonomicallydesignedcontrol panel combinsadvanced microprocessorcontrol and easy to adjustknobs.The set parameters(speed, time and tempera-ture) remain in memoryafter completion of a run,allowingfor repetive runssimplyby pressing"start".
Preset I AetuaI DisplayThe large LED constantlydisplays the actual rotorspeed in rpm, while thesmaller LED shows the set
speed. For indieation ofcentrifugal force just press"RCF" key during or before
,B"a run. ICoarse and Fine AdjustmentControl
Two knobs are provided forcoarse and fine adjustmentof speed. The knob on theleft allows for coarse adjust-ment 500 rpm increments.The knob on the right allowsa more precise adjustment in10 rpm increments.
- --
_.- rlll mm
11 .:. - =6. lIImiI CI!!I:II II:!I:II_ fB _ .11:. 11
-~
Z513K
The Z 513 K is a universal,high capacity, refrigeratedbench top centrifugeequipped with an efficientand powerful refrigerationsystem. Irrespective oftheinstalied rotor the power ofrefrigeration is shown bylong time runs on maximumspeed. For the coolingsystem the CFC-freerefrigerant R 404a is used.The rotor and rotor
chamber can be precooled tothe required workingtemperature prior to acentrifuge run by simplypressing the "pre-cool" keyon the control panel.
Versatile Use
A large selection of rotors isavailable for a broad rangeof applications:IIR)' Swingingbucketrotor:Accepts four hermeticallysealed round buckets for
1000 ml each or rectangularbuckets that can accomodate
up to 120x 15ml tubes. Max.
speed: 5000 rpm/5450 x g.Angle rotor 6 x 85 ml:
Max. speed: 12.000 rpm/16.904 x g.
Safety-Chassis: can beplaced on the benchtop oron one of the optional utilitycarts. Two carts are available,one stands at a comfortable
working height, the other fitsunder the bench for spacesavings. Both of these whee-led utility carts offer the con-venience of mobility andsafety.
Accessories
For more information about
the utility carts and theentire range of accesso-ries for the centrifugesZ 513 and Z 513 K,please see the separateaccessories brochure.
Common Features
Except the refrigeration ofthe Z 513 K, the features andcapabilities ofboth units areidentical. Due to the main-tenance-free induction
motor, there are no brushesto wear out or to be
replaced. The centrifuges areextremely quiet in operationdue to the extensive noiseinsulation. These are reasons
that make work directlybeside the units as pleasantas possible.
Advantages
. Speed may be selected in10rpm and 500 rpmincrements. Time may be set from 1to60 min. or continuousoperation. The amount of timeremaining to complete therun is also displayed. Automatie rotorrecognition. Radius correction featuresallowsg-value calculationwith compensation forvarying tube sizes andadapters. Brakingpower can beadjusted to any of tenavailable intensity levels. Temperature range from-10°C up to +40°C11Temperature indicator'showspreset and actualsampie temperature. Press the "quick"buttonfor short time runs, while theelapsed seconds aredisplayed on the LED. Imbalance cutout withindication. "precool"-programm. Diagnostics capabilityintegrated into the software. Electric motor driven lidlock
..
Centrifuge Z513 Z 513 K
Performance Data
Max. speedMax. RCF
Max. volume
12.000 rpm
16.904x g4 x 1000ml
Dimensions
Unit (W/H/D) 6l!46,5/73 ems 79/46,5/73 ems
Weight 90 kgs 140 kgs
Voltage230V150-60Hz
120V/50-60Hz230V150-60Hz
Order Number
274.00 V03274.00 V04
277.00 VOI
277.00 POl(incl. Swing out rotor
+ 1000 mt roundbucket, hermetically seated)
Accessories
Safety-Chassis
working-height 70 emsincl. Centrifugeworking-height II 0 emsincl. Centrifuge
274.98 VOI 277.98 VOl
274.98 V02 277.98 V02
Rotors
Swing out rotor 4 x 750 mlwith wind shield
Swing out rotor 4 x 1.000mlwithout wind shield
Swing out rotor 6 x 500 mlSwing out rotor 4 plaeesfor eonieal oil test tubes
Angle rotor 6 x 85 ml
Angle rotor 8 x 50 mlAngle rotor 8 x 30 ml·Hermetically sealed Version.. t20V version 4.500 rpmAAt4 x g
... 120 V version 3.000 rpm/2.334 x g
HERMlELABORTECHNIK
HERMLELabortechnikGmbHGosheimerStraße5678564WehingenPhone +49.7426.9622.50Fax +49.7426-9622.49E.mail:[email protected]:h"p://www.hermle.biz
Technicalmodilicationrightsreserved.Version 1/2003
-
Max. speed Max. RCF Order number
5.000 rpm** 5.450 x g 220.70 V06
3.600 rpm*** 3.376 x g 220.70 V05
4.000 rpm 4.239 x g 221.11 VOI
2.000 rpm 1.006 x g 220.41 V04
12.000 rpm 16.582 x g 220.78 V02 I V03*
12.000 rpm 15.294 x g 220.80 V02 I V03*
12.000 rpm 15.133 x g 220.76 V02 I V03*l