HFO Spray Polyurethane Roofing FoamHigh-Performance Insulation and Energy Savings with No Ozone Depletion

ETERNAFOAM

ETERNAFOAM

Tropical Roofing Products’ EternaFoam is a closed-cell Spray Polyurethane Foam specifically designed to deliver a high performance, fully adhered roofing system providing excellent insulation values and water proofing over a variety of roof deck substrates and configurations. EternaFoam locks in every portion of the roof creating a seamless membrane thus eliminating the need for mechanical fasteners — the number one cause of conventional roof leaks. EternaFoam spray foam roofing can also be applied to vertical surfaces making the seamless coverage self-flashing

EternaFoam insulation R-values effectively stops heat transfer from the roof deck, restricting outside air from entering and minimizing conditioned air from escaping that results in reduced energy consumption and cost.

Tropical Roofing Products’ coating systems include either Eterna-Sil Premium 100% Silicone and Eternalastic 100% Acrylic Elastomeric Roof Coatings offering 10, 15 and 20-Year warranties. All systems are fully credentialed, including Miami Dade County NOA, UL and FM.

4TH GENERATION BLOWING AGENT REDUCES GLOBAL WARMING IMPACTEternaFoam uses a 4th generation, HFO blowing agent eliminating ozone depletion and reducing global warming impact (GWP), a measure of how much heat a substance can trap in the atmosphere.

RENEWABLE, RECOATABLE

SELF-FLASHING, SEAMLESS WATERPROOF MEMBRANE

HIGH PERFORMANCEEffective insulating material.

Seamless air barrier. Severe storm resistant.

LEAK RESISTANTNo mechanical fasteners. No seams.

LIGHTWEIGHTHigh strength.

FASTER INSTALLATIONBroad range of applications.

LONG LASTING, SUSTAINABLE ENERGY SAVINGS

EPA approved 4th generation blowing agent.

ETERNAFOAM

LowVOC

www.tropicalroofingproducts.com

FLORIDA1904 SW 31ST AVENUEHALLANDALE, FL 33009800.432.2855

CALIFORNIA14435 MACAW STREETLA MIRADA, CA 90638877.827.2622

TEXAS1225 BRAI DRIVEPORT ARTHUR, TX 77640866.727.0091

PACIFIC NORTHWEST14325 NE AIRPORT WAY, SUITE 109PORTLAND, OR 97230844.854.9323

ETERNAFOAM

PHYSICAL PROPERTIES

REACTIVITY SELECTIONProcessing Designation: Winter Regular Summer

Surface Temperature: 50 - 75° F 60 - 90° F above 85° F

Heated trailers, hotboxes, or heated tank storage may be necessary. Material temperature should be confirmed with a thermometer.

PRESSURE / TEMPERATURE Dynamic Preheat Hose Heat Pressure: Temperature: Temperature:

1,000 - 1,400 psi 120 - 130° F 120 - 130° F (49 - 54° C) (49 - 54° C)

Drum Temperature Surface Drum Temperature In Use: Temperature: Storage:

65 - 85° F 50 - 150° F 60 - 80° F (18 - 30° C) (10 - 66° C) (15 - 26° C)

Aged “R” Value: ASTM C-518 6.8 per inch

Compressive ASTM D-1621 45-55 psi Strength: 40 min.

Core Density: ASTM D-1622 2.7 - 2.9 lbs./ft3

Closed Cell ASTM D-2856 >90% Content: 90 min.

Tensile Strength: ASTM D-1623 75 - 85 psi 60 min.

ASTM D-2842 Water Absorption: (1.0 max per .44 lbs/ft3 volume)

Water Vapor ASTM E-96 Permeability: 2.5 max 1.1 perms at 1” at 74°F, perm inch

Dimensional 1.20% change Stability: 28 days ASTM D-2126 in volume at 158°F, 98%RH

6 months when stored within Shelf Life: recommended temperature range

Coating Eterna-Sil High Solids Silicone Recommendation: Eternalastic Acrylic Coating

DENSITY 2.8 LB EternaFoam HFO 2.8 LB SPF delivers the board feet yield of traditional 2.5 LB SPF with the strength of 3.0 LB