hi-ways' 'xzalt p' recision applicator · lime in asphalt lime is used in hot-mix...

Fall/Winter 2017 Publications Mail Agreement Number 41137025

Public Works | Waterworks | Contractors | Infrastructure

Hi-Way's 'Xzalt' Precision ApplicatorCover article: Industrial Machine (Pg. 26)

INSIDE: Equipment l Services l News l Reviews

2 www.equipmentreview.caEQUIPMENT REVIEW

Edmonton Division 9015 14 Street NW, Edmonton, AB

Calgary Division 9800 Endeavor Drive SE, Calgary, AB

T 800.661.7346 E [email protected]

atstraffic.ca | Since 1966

Contact us today for your free consultation.

Winter is coming. We’ve got you covered.ATS Traffic has been a leader in traffic safety since 1966: we’ve seen a lot of winters.

Our mission is to get people home safely every day. We provide products, lane closures and On-Street Services designed to keep both drivers and workers safe on winter roads.

WE OFFER• Equifab Salt and

Sand Spreaders• Ver-Mac Message and

Arrow Boards• Salt and Sand

Storage Boxes• Culvert Markers• Bridge Markers• Snow Fence, and

more…

WE PROMISE• Consistent Quality• Competitive Pricing• Public & Worker

Safety• Driver Satisfaction• Safer Winter

Conditions

We provide the tools and systems to keep people safe and traffic running smoothly.

Fall / Winter 2017 3EQUIPMENT REVIEW

Graymont

Fall / Winter 2017 EditionVolume 7 Number 4

Published by:EQUIPMENT REVIEW INC.

Editorial and Advertising OfficeSuite 628,

440-10816 Macleod Trail S.E.Calgary, AlbertaCanada T2J 5N8

Publisher / EditorJerry Skinner

Telephone: (403) 238-8663email: [email protected]

Promotions ManagerJeremy Skinner

Telephone: (403) 860-1067email: [email protected]

http://www.facebook.com/ equipmentreviewmagazine

https://www.google.com/+Equipment ReviewMagazineCalgary

Circulation / ReaderMatters concerning additions, deletions,

address changes etc.- please use regular mail to contact us at

the address above.

“EQUIPMENT REVIEW”provides, in good faith, information that is

believed to be accurate about new products and services. However, no responsibility is assumed

for inaccuracies or errors, nor should legal or professional advice be assumed from our

text. Written permission from the Publisher is required for the commercial reproduction of any

part of this magazine.

Printed in Canada

Return Undeliverable Canadian Addresses to:

Equipment ReviewSuite 628

440-10816 Macleod Trail, SECalgary, Alberta, T2J 5N8

Publication Mail Agreement Number: 41137025

Lime in Asphalt

Lime is used in hot-mix asphalt as an anti-stripping additive and as mineral filler. Numerous highway depar tments have found that incorporating hydrated lime into hot-mix asphalt adds years to the life of a highway, thus making the addition very cost effective.

The addition of hydrated lime can reduce stripping, rutting, cracking and aging. Hydrated lime substantially improves each of these properties when used alone, and also works well in conjunction with polymer additives, helping to create pavement systems that will per form to the highest expectations for many years.

Lime is also used to upgrade marginal aggregates. In addition to the chemical effects that reduce stripping potential and the aging impact resulting from oxidative hardening, the filler effect improves resistance to high-temperature rutting and adds fracture toughness at low temperatures.

Hydrated lime is used in a variety of industrial applications including

water treatment, as an anti-stripping agent in asphalt, and in soil stabilization. Graymont carefully monitors its production processes to provide products that meet exacting specifications. These include applicable ASTM, NSF-60 and AWWA B202 standards.

Graymont has roots stretching back almost seven decades and operations which, in some instances, have been lynchpins of their local communities for well over a century. As might be expected of an enterprise with such a history, Graymont takes a long-term approach to business that is evident in its strong commitment to sustainable growth. Graymont strives to be an industry leader and attain world-class per formance in all aspects of its operations, particularly in the areas of workplace health and safety and environmental stewardship.

For fur ther information visit: www.graymont.com


Pierce Manufacturing Inc., an Oshkosh Corporation company recently announced that Commercial Truck Equipment Corporation is the new Pierce dealer for the Canadian provinces of British Columbia, Alberta, Saskatchewan, and Manitoba, as well as Nunavut, the Yukon, and the Northwest Territories. To ensure seamless service to current Pierce customers, a succession plan, coordinated with former Pierce dealer Wholesale Fire & Rescue LTD., allows

for a six-month transition period running through December 2017.

“We are ecstatic to announce Commercial Truck Equipment as the newest member of Pierce’s dealer network, and we wholeheartedly welcome them into this select group of full-service organizations,” said Jim Johnson, Oshkosh Corporation Executive Vice President and President of the Fire & Emergency segment and Pierce Manufacturing.

“We’re extremely confident in its capabilities and commitment to serving Pierce customers.”

Commercial Truck Equipment’s branch location in Surrey, BC has been an authorized Pierce services provider since 2011. “Through our succession planning process we identified an ideal partner to move our business forward in the region.” explained Matt McLeish, Pierce Manufacturing’s Senior Vice President of sales and marketing.

Commercial Truck Equipment Appointed Dealer for Pierce Manufacturing

Commercial Truck Equipment

Pierce Manufacturing Inc. recently announced that Commercial Truck Equipment Co. is the new Pierce dealer for the Canadian provinces of British Columbia, Alberta, Saskatchewan, and Manitoba, as well as Nunavut, the Yukon, and the Northwest Territories. With a network of full-service locations across the provinces, Commercial Truck Equipment is Western Canada’s largest supplier of truck equipment. Its branch location in Surrey, BC has been a Pierce authorized services provider since 2011.


“Commercial Truck Equipment features a long tradition of ‘best in class’ product knowledge, customer support, and technical expertise. Pierce customers across Western Canada will benefit from this move.”

With a network of full-service locations, Commercial Truck Equipment is Western Canada’s largest supplier of truck equipment, and is well suited for an increased role in the fire and emergency industry. Renowned throughout Canada for its professional engineers, designers, and certified heavy-duty mechanics, welders, and fabricators, Commercial Truck Equipment’s staff is expert in a wide range of truck applications and integration solutions.

“We are excited and proud to represent Pierce Manufacturing across Western Canada – it’s the most highly regarded name in the industry for good reason. Their product quality and professionalism are second to none,” said Morgan MacKay, General Manager of Commercial Emergency Equipment Co. “We have an expert team in place that understands the unique requirements of the emergency truck industry and are ready to provide expert solutions, parts and service.

About Pierce Manufacturing, Inc.Pierce strives to set the standard when it comes to customization and service.

It all star ts in its state-of-the-ar t manufacturing facilities in Appleton, Wisconsin and Bradenton, Florida. Over one million square feet of manufacturing space is dedicated to creating Pierce’s fire apparatuses. Both facilities are ISO-9001 certified, showing the company’s dedication to meet world-class standards for quality. From research and development, to service and support, its trucks are designed to per form under the toughest conditions.

Proven Technologies and InnovationPerformance driven design ensures continuous evolving to bring customers industry leading advancements and unmatched innovation. As a subsidiary of Oshkosh Corporation, its experienced team has access to an arsenal of cutting edge technologies and revolutionary processes. Customers can choose from one of Pierce’s seven custom chassis and advanced innovations.

• Ascendant Class of Aerials: The Ascendant technology has expanded into 5 innovative products: single or tandem rear axle 110’ platforms, single or tandem rear axle 107’ ladders, and 107’ tractor-drawn aerial. The Ascendant Class of Aerials was specifically engineered to equip firefighters with more aerial choices than ever before. Whether it be weight restrictions, compartment space, preference to ride rather than climb, the lower cost of ownership, or rescue capabilities, the Ascendant technology provides flexibility and a wide range of options to meet each departments’ needs.

• Command Zone: Cutting edge electronic system that makes it easier for firefighters to maintain their vehicles, prepare for calls and monitor performance on the scene. It also delivers the industry’s first prognostic capabilities.

• E-Coat Corrosion Protection: Delivers a superior corrosion and chemical resistance, while maintaining a high-quality, resilient surface for paint of any colour or finish.

• HERCULES CAFS: For a quicker and safer knockdown, with less exposure to heat, the compressed air foam system has a low surface tension that allows it to spread quickly, cover widely, and cling more aggressively to the surface.

• Husky Foam Systems: From municipalities to industrial refineries, volunteers to careers, Class A to Class B fires, Pierce Husky foam systems are the extremely high performing, easiest, most economical and safer way to fight fires.

• PUC: The PUC minimizes the vehicular space used for fire suppression and maximizes the space for tools and equipment.

• TAK-4 Independent Suspension: Independent Front Suspension (IFS), stops faster, corners better, improves handling, offers better ride quality and is far more maneuverable than straight-axle trucks. Independent Rear Suspension (IRS) operates like IFS, but provides power to the wheels. With the ability to add TAK-4 T3, the 100% mechanical steering system further improves control and mobility.

• Snozzle: A high-reach extendable turret offers advanced elevated waterway response allowing you to attack fires from multiple angles.

Visit www.comtruck.ca for more information.

Commercial Truck Equipment Appointed Dealer for Pierce Manufacturing

6 www.equipmentreview.caEQUIPMENT REVIEW Fall / Winter 2017 7EQUIPMENT REVIEW

ATS Traffic: Keeping You Safe on Winter Roads

ATS Traffic

ATS offers the following Equifab products:

With products and services designed to keep both drivers and municipal workers safe on winter roads, ATS Traffic can fulfill the demands of maintaining safe roadways year-round.

ATS Traffic is pleased to announce a recent partnership with Equifab, a Quebec-based company producing high-quality, truck-mounted spreaders. Equifab provides reliable, efficient, and built-to-last products that are made to withstand Canadian winters, spreading salt and sand

more effectively. Using only hassle-free electric motors, Equifab products do not require gasoline, which reduces overall environmental impact.

All Equifab spreaders use a drag chain system as opposed to the traditional Auger system, giving them greater sur face area coverage. This conveyor system is more time and cost efficient, and is built to reduce jamming. The inver ted V design ensures there is no pressure on the conveyor chain, which

prevents delays and blockage. With a hassle-free and reliable system, municipalities can get roadways prepared for safe driving as quickly as possible.

Offered in both stainless steel and polyethylene, Equifab spreaders can be built to spec according to your requirements. Each model offers different features that are suitable for specific environments including lightness, durability, versatility and low maintenance.

Equifab 8’ Polyethylene SpreaderThis spreader is easy to operate and maintain. The polyethylene construction and electric drive system offer lightness, durability, and reliability. This product is versatile and can be custom built to suit customer needs.

Equifab S200 Stainless Steel SpreaderThis spreader is easy to operate and maintain. The stainless-steel construction and electric drive system offers durability, reliability and is low maintenance, providing a lower cost-of-ownership. This product is versatile, and can be custom built to suit customer needs. It also comes with an optional dual motor kit and a variable speed controller.

Equifab Tailgate Salt Sand Spreader DualThis smaller, tailgate spreader is designed to process all types of abrasives, including salt and sand. It is equipped with a 12” wide conveyor chain and installs directly on a standard 2” trailer hitch. With dual variable speed control, this versatile spreader can spread patterns of 2’ up to 24’.


Ver-MacMany of ATS Traffic’s products are designed to withstand harsh climates and conditions, and Ver-Mac Message and Arrow Boards are no exception. Configured specifically for Canadian winters, Ver-Mac’s 548 Small Panel Full Matrix Message Board and the ST 4825 Arrow Board Trailer are solar-powered with tilt-and-rotate panels and JamLogic fleet management software (modem required). With a compact design, these trailers are ideal for temporary use in urban areas, school zones, or lower speed roadways with limited space.

Salt and Sand Storage Boxes

Outdoor-rugged and weather-resistant, the Salt Box is an ideal solution for storage needs. Built with durability in mind, the Salt Box is constructed from UV-protected polyethylene material that eliminates corrosion and is ideal for salt, sand and fertilizer, sports equipment, or tool storage.

ATS Traffic offers 4 sizes with different load capacities and includes a 5-year warranty.

Culvert MarkersAvailable in stainless steel or fiberglass, culvert markers reduce damage and costly repair to vehicles and culverts. Snowplow operators may also block culverts with snow, making culvert markers a necessary item in the depths of winter. Both types will outlast rebar or fence posts, and the fiberglass model can bend past 90° (the steel model has a built-in spring mechanism to reduce potential damage).

Bridge MarkersMuch like a culvert marker, bridge markers make objects more visible in snowy conditions and reduce the risk of collision or structural damage. ATS Traffic offers both left and right Bridge Marker Brackets with high visibility yellow and a reflective strip. Necessary mounting hardware and a built-in leveling device is also included.

For further information contact ATS Traffic at: 1-800-661-7346, or visit: www.atstraffic.ca

Additional Winter Products

(Pictured left: PCMS-548 / Pictured right: ST-4825)



Many on-the-job factors can affect a worker’s ability to get the job done. Whether it is the health of the employee at stake or the health of the equipment used, downtime is extremely expensive. One factor in the spotlight right now is the effect of crystalline silica on health and safety.

Crystalline silica is a basic component of soil, sand, granite, and many other minerals. Quartz is the most common form of crystalline silica. All of these forms may become respirable size particles when workers chip, cut, drill,

or grind objects that contain crystalline silica. When this silica is ingested by a human or by a machine, bad things happen. Studies show that upwards of 600 workers die each year from silicosis developed from over exposure to silica at work. Not only is this dust detrimental for the workers, but the dust is also damaging to equipment.

Polar Mobility is one area company that is working diligently to assist companies save lives and capital. As a charter member of International Society of Environmental Enclosure

Engineers (ISEEE), Polar Mobility offers expertise in health and safety, particularly when it comes to meeting the requirements of local laws regarding silica/DPM/Asbestos exposure. Understanding the details of the permissible exposure limit (PEL) and meeting the 25, 50, or 100µg/m3 exposure limits can be challenging without a little guidance. The team at Polar Mobility not only understands, but in three easy steps, can help in meeting the regulatory requirements.

Put your Operators’ Health and Safety concerns to rest

Polar Mobility Research

Polar can also help limit your liability and protect your equipment


Polar Mobility introduces the simple three-step solution to superior cab filtration. Beginning with clean fresh air, the Sy-Klone RESPA-CF powered pre-cleaners are a cost-effective way to clean the air before it reaches the plenum. This fresh air system dramatically extends filter life and reduces the frequency of costly HVAC repairs by filtering with a MERV16 filter, which removes over 95% of all respirable dust (.3 to 1 micron), or HEPA Filter, which removes 99.95% of all respirable dust, before it gets into the HVAC system.

Step two, focuses on cleaning recirculated air within the cab with the Sy-Klone RESPA-CFX. This product offers customizable recirculation filtration to protect cab electronics, increase operator protection, and reduce harmful particulate buildup on the HVAC evaporator core.

To complete the cab filtration system, Polar Mobility offers an electronic pressure monitoring system. This easy-to-install customizable unit gives real-time information on cab pressure, audibly alarms the operator when pressure drops below required level, notifies the operator when to change the filters in the RESPA system, can be connected to remote telemetry systems, and satisfies the requirement for a cab pressure monitor when required by law. This is an essential part of the complete RESPA Cab Air Quality System.

Improve the cab environment for operators, reduce the dust exposure of HVAC and cab electronics, extend maintenance intervals, and lower operating costs, all in three simple steps. Polar Mobility offers a full line of Sy-Klone products to meet the filtration needs of engine and HVAC systems, all designed to keep employees and equipment healthy, happy and productive.

For more information contact Polar Mobility Research (Calgary, Red Deer, Edmonton) or visit: www.polarmobility.com

Polar Mobility offers three steps to help everyone breathe easier…


Pollard Water was acquired by Wolseley’s sister company Ferguson, thus allowing it to stock the most desired products at its Edmonton branch and becoming the Western Canadian distribution hub for any and all products coming from Pollard Water. All products sold by Wolseley

are sold in Canadian dollars and all shipping, handling and custom brokerage charges are included. This simplifies customer’s purchases of Pollard products, and makes for an extremely smooth purchasing process. In addition, Wolseley stocks the custom thread patterns

for all the devices customers need in this region, eliminating the need for adaptors and unnecessary extra parts for testing equipment.

Wolseley Waterworks partners with Pollard Water

Wolseley Waterworks


Wolseley Waterworks Wolseley Waterworks is a one-stop source for water products with 32 branches across Canada. The company is a national leader in providing waterworks products and services to the municipal, heavy construction, water, and waste water sectors. It is also a recognized national distributor of pipe, valves and hydrants, geosynthetics, fittings and flanges.

Wolseley is distributor for leading manufacturers from across North America. These vendor relationships

allow the sourcing of superior quality products both globally and locally, resulting in extremely competitive pricing and product selection. The company takes pride the fact that its people are known for their technical knowledge, expertise and efficient customer service. Time is money and Wolseley’s goal is to provide the service and solutions that will help customers deliver their projects on time and on budget. With 24/7 after-hour services, Wolseley’s staff of professionals is dedicated to provide solutions and to source products for complex projects.

Services include

• 24/7 after-hours services• Technically savvy associates with

industry expertise and industry experience

• Centralized quotation services• Readily available inventory• Project management services• Fast and convenient delivery• Expertise to gather and source

product for complex projects• Customized training programs

For more detailed information visit: www.wolseleyinc.ca - waterworks, or contact your local Wolseley Waterworks branch.


The key features of RASCO mowers include efficiency, durability, simplicity and safety. They are included in the process of development and production of professional RASCO equipment for summer road maintenance, which

encompasses crane mowers and attachments, as well as brushes and washers for road cleaning. Efficiency, durability, simplicity and safety are implemented through a range of functional characteristics of RASCO

crane mowers and attachments, such as the design of hydraulic arms, multiple safety mechanisms, simple control, fast and safe mounting and a wide choice of additional options.

RASCO Mowers: Efficiency, Longevity, Simplicity and Safety in highway maintenance

CUBEX

BRK MowerBRK is a robust and strong lateral crane mower designed for demanding mowing work. Due to the high quality steel from which the mower crane arms are made and the reach of 7 metres, it is extremely efficient in maintaining the banks of watercourses and ditches, as well as

for the vegetation by the side of open roads. Safe mowing with the BRK mower at higher speeds is aided by safety hydraulic elements that prevent breaks and damage to the mower when the working tool encounters obstacles, as well as by systems for relief and mower operating head floating position. An advanced control

system ensures a fast and efficient use of the mower. In the transport position, the mower is placed on the rear end of the vehicle, which offers good mower and vehicle visibility in traffic, with the support of in-built signalling devices.

RASCO manufactures a full line of professional crane mowers that includes models for all types of tractors, multi-purpose and small utility vehicles. The construction of hydraulic crane arms is adjusted to different reach lengths, and the working tools and attachments are adjusted to the type of vegetation and the function they are performing.


SPECTRA Mower

SPECTRA is a rear tractor mower designed for reliable and fast mowing. The main feature of the mower is good working tool visibility, due to special kinematics of crane arms which brings the working tool in the user’s visual field. This enables fast mowing, along with a high overview of the terrain. SPECTRA was designed with the user’s needs in mind. Mower control enables fast manipulation of crane arms and maximum control. Crane arm relief system enables vertical following of the terrain, while the floating system adjusts the position of the operating head to the surface level.

Oil cooler with optimal dimensions is located next to the oil tank, and serves to prevent the overheating of hydraulic oil and to ensure precise operation of hydraulic components. The hydraulic cylinder protects the crane arm from overload when an obstacle is encountered. In the transport position, the mower is placed on the rear end of the vehicle, which provides for a safe drive, with the aid of in-built signalling devices.

NEVA MowerNEVA is a simple but efficient rear tractor mower. It is designed for efficient

mowing on demanding terrains by the side of roads or ditch network, and the fast replacement of different working tools also enables the use of the mower for other kinds of road maintenance. Numerous mechanisms enable efficient and safe operation of the NEVA mower. The hydraulic cylinder protects the crane arm from overload when an obstacle is encountered. Crane arm relief system enables vertical monitoring of the terrain, while the floating system adjusts the position of the operating head to the surface level.

The mower’s control system guarantees efficient mowing on all terrains. Oil cooler with optimal dimensions is located next to the oil tank, and serves to prevent the overheating of hydraulic oil and to ensure precise operation of hydraulic components. In the transport position, the mower is placed on the rear end of the vehicle, which provides for a safe drive, with the aid of in-built signalling devices.

PRKV MowerPRKV is intended for the maintenance of demanding terrains that are harder to access with the use of working machines. It is an ideal choice for maintaining vegetation by the side of roads due to crane arms made from high-quality steel resistant to mechanical strains and the reach of 6 metres. The PRKV mower can easily and simply pass over obstacles characteristic for uneven terrains with a poor overview. Safety hydraulic elements prevent breaks and damage to the mower in cases when the working tool encounters obstacles.

An advanced control system and relief system guarantee safe and balanced operation and good monitoring of the

terrain configuration. The complete working efficiency of the PRKV mower is ensured by a complete overview of the terrain due to mounting on the front of the working machine, as well as by the high-quality design of mower crane arms.

Attachments

RASCO’s wide range of attachments includes the ‘BM’ brush for removing grass, weeds, and remaining spreading agents by road curbs, the ‘KAN’ ditch cleaner for cleaning and profiling ditches by the side of roads and the ‘SRG’ branch cutter for maintenance of treetops and removal of young trees.

For more information on RASCO mowing products contact CUBEX in Calgary or Edmonton, or visit: www.cubexltd.com


EMCO Waterworks

Looking for a safer way to bevel pipe? Reed’s Cordless Power Pipe Beveller quickly and easily deburrs and bevels plastic pipe of 2” diameter’s and up. EMCO Waterworks has recently introduced the REED Beveller to its product offerings.

This lightweight tool creates fast, smooth cuts in the field with ease, making it extremely useful on most PVC glued and bell and gasket joints. The Reed Cordless Power Beveller is easily adjustable for bevel length. The RBIT1 router

bit evenly cuts a 15° external bevel up to 5/8” long which works ef fectively on smaller diameter PVC pipes.

REED’S NEW GRAB AND GO CORDLESS POWER PIPE BEVELLER

“… we will be using the beveller on all sites and I am happy and excited to start using it.” Assad Rafih, Volker Stevin Contracting Ltd.

Cont’d...


The RBIT2 router bit can be used to create 12° bevels up to 1” long. To eliminate damage to the gasket, pipe bevel is required when installing into a pipe bell. Bevels on cement joints allow for even distribution of solvent cement glue to maximize glue contact area.

For internal bevels on plastic conduit of 2” or more, electrical and utility contractors can now appreciate the ability to make pipe interiors snag-free. The CPBIDKIT is a complete kit for ID beveling. The CPBKIT can be conver ted to an internal beveller with the optional ID Beveller Shroud (CPBIDS).

The Cordless Power Beveller Kit (CPBKIT) consists of the beveller attachment powered by a 22,000 RPM, 18V cordless die grinder with a 4 Amp hour Lithium-Ion batter y. The grinder has more than sufficient RPMs to provide smooth cuts. The included RBIT1 and Rbit2 cutting tool is a 4-flute, carbide router bit which delivers consistent, safe cuts quickly on any site.

Features:

• Portable, cordless power tool deburrs and bevels plastic quickly

• Adjustable CPB beveller creates external bevel on 2” and larger diameter plastic pipe

• Long-lasting carbide router bit with four flutes and high RPMs for fast, smooth cuts

• Ideal for large diameter plastic pipe• Optional accessory beveller shroud

CPBIDS rapidly bevels 2” and larger internal diameters

• No fine dust partials • Extremely safe way to

bevel pipe

Volker Stevin Contracting Ltd., a prime contractor in Alberta, was the first contractor in Canada to test the Reed beveller. During this pilot project Volker Stevin and EMCO determined that the RBIT1 router bit was not long enough to properly bevel larger diameter PVC pipes. This feedback was provided to Reed’s engineering

team and a short time later they introduced the RBIT2 router bit. This newly designed bit is 1” long and can properly bevel up to and including 24” PVC pipes.

Assad Rafih of Volker Stevin Contracting Ltd. had this to say about the beveller, “I liked using the Reed Cordless Power Beveller. I think it’s an awesome tool that can safely and quickly bevel pipes on site. I think the kit needs to come with 2 batteries as we are using this in the trench and need to make sure the beveller is always ready to go. I really have nothing bad to say about it, we will be using the beveller on all sites and I am happy and excited to star t using it.”

The biggest benefit is how safe the tool really is compared to traditional methods. The router bit is protected by the shroud allowing the contractor to confidently bevel the pipe without worry. When cutting the pipe it creates medium to small PVC shavings, this eliminates the concern of contractors breathing in fine particles. The Reed Beveller is battery operated - eliminating any concern of gas fumes in the trench.

Contact your local EMCO Waterworks location for more information on the Reed Cordless Pipe Beveller.



The importance of managing lead content compliance and contaminant leaching in municipal water distribution systems is of paramount importance. NSF/ANSI 61 certification now requires fire hydrants to conform to contaminant leachate tests for lead and other contaminants. In addition to this, NSF/ANSI 372 further requires products being utilized in water distribution systems meet a weighted average lead content of no more than 0.25%.

Using hydrants that are certified to NSF/ANSI 61 and NSF/ANSI 372 ensures they will not contribute to excessive levels of lead or other contaminants in distribution systems.

All CLOW Canada Fire hydrants are made in Canada and are certified by NSF International to NSF/ANSI 61 and are compliant with NSF/ANSI 372.

NSF 61, NSF 372 and Lead ContentWhat are the requirements for NSF/ANSI Standard 61 and lead?

NSF/ANSI Standard 61: Drinking Water System Components - Health Effects was published in 1988 to establish minimum requirements for the control of potential adverse human health effects from products that contact drinking water. NSF/ANSI 61 contains

requirements that restrict both 1) the level of lead that can be contained in water contact materials of drinking water products, and 2) the level of lead that can extract out of the product and into drinking water.

Lead Content RequirementsRestriction on the Use of Lead-Containing Materials

Section 3.5 of NSF/ANSI 61 precludes the use of lead as an intentional additive in wetted materials and components of products, with the exception of brass and bronze meeting the definition of “lead free” within the specific provision of the U.S. Safe

Do your fire hydrants comply?

CLOW Canada


Drinking Water Act (SDWA). Through 2013, this was applied under NSF/ANSI 61 as brass or bronze containing no more than 8 percent lead. Products are also required to comply with all chemical extraction requirements of NSF/ANSI 61, including lead.

In 2011, U.S. federal legislation passed that revised the definition of “lead free” within the SDWA. In brief, the definition now requires that the wetted surfaces of pipes, pipe fittings, plumbing fittings and fixtures meet a weighted average lead content of no more than 0.25 percent. The changes in the SDWA were due to take effect January 4, 2014. As Section 3.5 of NSF/ANSI 61 requires that products comply with the lead-free requirements of the SDWA, all NSF/ANSI 61 products falling into the scope of the legislation are also required to comply with the new 0.25 percent maximum lead content requirement. The date of this required compliance under NSF/ANSI 61 was the same as the effective date in the SDWA, January 4, 2014.

NSF 372 and NSF 61 Annex G

NSF/ANSI 61 was revised in December 2008 to establish requirements for use when a 0.25 percent lead content requirement needs to be met in addition to current chemical extraction requirements of the standard. The requirements were placed in Annex G - ‘Weighted Average Lead Content Evaluation Procedure to a 0.25 percent Lead Requirement’. A request was

made to add these requirements to the standard to allow manufacturers the option of being certified to a lead content standard, such as the California Health and Safety Code (Section 116875), commonly known as AB1953. That law, which went into effect January 1, 2010, applies to any pipe, pipe or plumbing fitting, or fixture intended to convey or dispense water for human consumption through drinking or cooking. Similar laws have since been enacted in Vermont, Maryland and Louisiana, and took effect nationally through the revised U.S. SDWA in 2014.

In 2010, the lead content evaluation procedures of Annex G were moved to NSF/ANSI 372: Drinking Water System Components - Lead Content, and Annex G were updated to simply reference it. Movement of the procedures from Annex G to NSF/ANSI 372 allowed for their application on products beyond the scope of NSF/ANSI 61 like drinking water treatment units and food service equipment. It also allowed for citing compliance separate from NSF/ANSI 61 for those jurisdictions wishing to do so.

At the same time Annex G procedures were moved to NSF/ANSI 372, the annex was balloted to be retired three years later. The end of that three-year period was October 2013. Although Annex G was retired from NSF/ANSI 61, NSF continues to support the “-G” cer tification marks as long as they are of value. This

is anticipated to be for a number of years as they provide a simple mechanism of denoting compliance with both the chemical extraction requirements of NSF/ANSI 61 and the new “lead-free” requirements of U.S. state and federal laws.

Currently, all products certified by NSF as compliant with Annex G are also compliant with NSF/ANSI 372. No additional testing is required beyond the normal routine monitoring of certified products. The listings of products currently certified by NSF to Annex G will continue to bear the [G] certification footnote:

[Current footnote]

[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content requirements for “lead-free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act which took effect in January 2014.

[Future footnote]

[G] Product complies with NSF/ANSI 372 and conforms with lead content requirements for “Lead-free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act in effect as of January 4, 2014.

For further information contact CLOW Canada at 1-800-561-9931, or visit: www.clowcanada.com


The SmartCover is a self-contained, wireless level monitoring system with immediate alarming and historical data logging capabilities.

One of the primary uses of the SmartCover system is the prevention and advanced notification of Sanitary Sewer Overflows (SSO) and Combined Sewer Overflows (CSO). This is achieved by continual monitoring of the water level within a collection system. When the water level rises above the customer predetermined threshold due to a constriction downstream or capacity issues, an alarm is sent

directly to emergency response personnel.

This enables the customer to receive advance notice of an issue arising in the collection system so that corrective action can be taken before an overflow occurs. Alarm acknowledgement, alarm level thresholds and system status can be changed and viewed remotely via the SmartCover System’s secure web site. This award-winning monitoring system is a completely self-contained, turn-key solution developed specifically for the water and wastewater industry in close collaboration with industry leaders.

The Smar tCover system was built to solve industr y problems at high value and low burden. Providing completely reliable two way wireless communications, the system provides real-time continuous remote sensing, user-definable alarm settings, an easy-to-use web based inter face, and long and shor t term data collection and analysis. Built to operate at sites that are environmentally dif ficult, have no power or communications, the Smar tCover provides “instant infrastructure” - it can operate vir tually anywhere in the world, installs in minutes and is on-line and ready for you immediately.

Unique features of SmartCover include:• Satellite communications with

extremely high reliability• Data communication from anywhere

on earth• Easily attaches to any manhole or

hatch• No need for confined space entry to

install or maintain• Traffic rated antenna• No nuisance alarms• Integration of comprehensive data

analysis software• World Class customer service

Also available from SmartCover are the SmartFLOE, SmartTrend and SmartRain RD systems.

‘SmartCover’ - Inflow and Infiltration Detection (IID), and for prevention and advanced notification of Sanitary Sewer Overflows (SSO) and Combined Sewer Overflows (CSO)

Accu-Flo Meter Service

“SmartCover enables you to actually look into the sewer network to see what’s going on.”- Dave Henderson of XPV Water Partners appearing on Bloomberg News.


SmartFLOE Flow measurement is a valuable management metric for any open channel water conveyance system. However, conventional flow measurement methods can be expensive and complex, posing challenges with regard to reliability, data collection and ease of maintenance.

The SmartFLOE Flow Estimation System addresses these problems by providing a low-cost, low maintenance, high reliability method for remote flow measurement and communication. Using the core SmartCover technology for non-contact remote monitoring and global data communication, the advanced SmartFLOE algorithm provides ongoing real-time measurement of flow rate.

SmartTrendSmartTrend is a comprehensive software tool that enables users to anticipate overflow events at remote monitoring sites long before they occur.

SmartTrend automatically scans each site to analyze trends in the collection system. It determines conditions using advanced signal processing and pattern recognition and sends Advisories to users when a trend is discovered. Users have an advanced method available to identify future issues, including alarms for SSOs and CSOs, before they occur. It aids users and promotes advanced planning for maintenance and capital repairs.

Key benefits include:• Operational costs are lowered with regular business hours

response.• Risks are eliminated by avoiding after hours emergency

response.• Managers and supervisors acquire a new tool to increase overall

efficiency with fast and easy assessment of specific situations.

SmartRain RD SmartRain RD is a new tool that integrates rain data with level or flow data in the collection system. For users of the SmartCover level monitor or the SmartFLOE flow monitor, rain data is acquired and presented in the user interface on a single display.

This data integration capability provides an easy method to view and understand the relationship of level or flow changes as affected by rain. It is particularly useful for studying Inflow and Infiltration (I&I), where it merges these two essential data streams and seamlessly characterizes I&I sources within the collection system.

The mission of SmartRain RD is to:• Provide integrated rainfall and level/flow data in real-time• Create a Profile of the Sewershed• Identify I&I costly sources• Provide easy, rapid, low cost deployment

For further information on SmartCover systems contact Accu-Flo at: 1-800-921-ACCU (2228), or visit www.accuflo.com


The Exzalt is a precision machine producing less material bounce and better road adhesion, vir tually eliminating over-application on roadside shoulders. The Hi-Way Xzalt delivers a power ful 70:30 ratio of dr y/liquid material via an innovative directional spinner that broadcasts mixed materials on one, two or three lanes to reduce time, fuel and miles. Xzalt meets the toughest demands for snow and ice management:

• Higher application speeds• Longer routes• Fewer spreaders

What’s the benefit of 70:30 application? Properly mixing liquid and granular material with a 70:30 ratio reduces salt usage while accelerating ice

melt – up to 70% less than normal. The optimum mixture (approximately 60 gallons (227 l) of liquid per one ton (907 kg) of salt) resembles the consistency of oatmeal, providing less material bounce, less influence from wind and improved adhesion to the road. In addition, the mixture accelerates the deicing process.

Additional features on the Xzalt include:

• Adjustable height enclosed chute fits various trucks

• Integrated liquid system• High-volume molded tanks with

integrated baffles• Easy ground-level rear fill• Integrated storage leg system for

quick, one-person installation and removal

• Painted carbon steel or unpainted 304 stainless steel

• 10 ft. (3.05 m), 12 ft. (3.66 m), or 14 ft. (4.27 m) lengths

• Galvanized screens• Inspection ladder• Work lamps• Beacon or strobe lights

Superior Precision ApplicationA forward-thinking direction spinner and control take Xzalt beyond ordinary – one touch lets operators adjust symmetrical or asymmetrical patterns on one, two, or three lanes. The spinner assembly swivels, and conveyor and spinner speed automatically adjust to apply the spread pattern precisely to the left, center or right of the spreader. Material blending starts when dry salt mixes with liquid upon exiting the spinner chute and ends before exiting the spinner.

• Spinner, liquid pump and conveyor sensors eliminate application rate and controller setting guesswork

• Positive displacement direct-drive gear pump with sensor for precise application rates

• Adjust spinner system from the cab

Engineered Spreader ControlThe Xzalt features FORCE America SSC6100 spreader control, specifically engineered to work seamlessly with this precision applicator. Both new and existing 6100 controls are compatible with the Xzalt – a simple update provides the intelligence to operate it. Unique, easy-to-use features set this controller apart:

Hi-Way’s ‘Xzalt’ Precision Applicator

Industrial Machine

No ordinary salt and sand spreader


• Pre-defined QuickLane setting temporarily widens the swath width to cover a turn lane or intersection

• Ability to reduce from multiple

lanes to a single lane in the event of oncoming traffic

• Multi-function operator inter face• Large 7 inch (17.8 cm) LCD display• Instantly view and adjust material

output• Up to five proportional joystick

controls• Easy set up, maintenance and

configuration with Never Lost menus

• Convenient large fleet set up with USB-capable calibration copying

• Up-to-the-minute output totals

What is the Quicklane Setting?Developed exclusively for the Xzalt, the QuickLane function on the FORCE America 6100 spreader control gives operators the power to temporarily widen swath width to cover a turn lane or intersection – with a simple touch of a button. Or, program QuickLane to temporarily reduce swath

width from multiple lanes down to a single lane to avoid interference with passing vehicles.

For further information contact Industrial Machine Inc. at: 587-286-2772, or visit: www.industrialmachine.ca


W.R. Meadows is the western distributor for Marathon Equipment Inc. Marathon is a global leader in manufacturing and designing asphalt repair and maintenance equipment. Marathon supplies contractors and

public works depar tments around the world with a full line of por table and trailer-mounted machines including hot asphalt transpor ters, crack sealing kettles and equipment, infrared asphalt repair equipment

as well as cold and heated spray sealing machines for all types of sealants, including water based emulsions, solvent based sealers and asphalt cement.

Crack Sealing and RoutingMarathon manufactures a complete range of crack sealing equipment. For the budget conscious, or those getting into small scale crack sealing, a range of direct fired por table kettles is available, ranging from 10-100 gallons capacity, and also the DPS-5 for pumping cold pour crack filler

Also available are crack routers, supplied with 24HP to 37HP Kohler engines.

For larger-scale operators and road maintenance crews needing to apply oil jacketed materials, Marathon offers both gravity pour and heated hose pumping kettles ranging from 10 to 400 gallons, with fast heat up times and high throughput. The KERA lineup offers 145-400 gallons capacity with a proprietar y oil jacketed heated hose system. Many KERA kettles are over 10 years in operation and are still using the original hose. This system saves owners from the more frequent failures and costly replacement of electrically heated hoses.

Marathon Asphalt Repair and Maintenance Equipment

W.R. Meadows


Hot Asphalt TransportA full line of hot mix transporters, from 2-4 ton capacity, in a variety of configurations is available. HMT units can be made trailer mounted for por tability, or skid mounted to slip onto an existing trailer or into the back of a truck. Propane and diesel are both available for heating, along with hydraulic dumping units and auger discharge units.

Infrared RepairsMarathon makes a complete line of infrared asphalt heating equipment from the 36x36 inch walk behind for small utility cuts and manhole repairs to seam heaters designed to be mounted to a paver

Tack Coat ProductsFor emulsions, the PES line of sprayers is suited to materials that do not require heating. These machines can be built with spray wand and spray bar application systems. The LD models of liquid tack distributors are available in 600 and 1000 gallon capacities. Standard and optional components offer users propane heat, fully insulated tanks, optional spray bars, high capacity pumps, optional automatic temperature control, optional in cab control for spray bars and the option to hand spray plus a number of other capabilities. Also for spraying hot tack, the TPS and UPS line of tack sprayers offer those needing smaller spray systems a complete set of options and abilities.

W.R. Meadows stocks a large number of related tools and products to help with any job. Crack filler and seal coat Squeegees, asphalt light lutes, or just about any other product you could need on the job site.

For fur ther information contact W.R. Meadows at: 1-800-661-6971

Marathon Asphalt Repair and Maintenance Equipment

www.equipmentreview.ca

hi-ways' 'xzalt p' recision applicator · lime in asphalt lime is used in hot-mix...

Documents