high abuse fixtures · 2020. 7. 23. · • plated steel concealed anchor rods and fasteners....

2
2901 NE Hagan Road - Lee’s Summit, MO 64064 v 816-554-0300 v [email protected] v www.metcraftindustries.com LinkedIn: linkedin.metcraft.pro v YouTube: youtube.metcraft.pro v Instagram: instagram.com/Metcraft_Ind/ v Twitter: https://twitter.com/MetcraftInd HIGH ABUSE FIXTURES WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. DESCRIPTION This Toilet Fixture is designed for high abuse areas with an accessible pipe chase. The fixture is fabricated using heavy gauge type 304 stainless steel, seamlessly welded to form a vandal resistant unit. Internal piping is stainless steel. Exposed surfaces are polished to a satin finish, except for the integral seat which is polished to a bright finish. PERFORMANCE STANDARDS Metcraft’s standard toilet is a 1.6 gpf (6.0 lpf) fixture with a 3’’ (76mm) waste outlet. Metcraft offers a “High Efficiency Toilet” (HET) 1.28 gpf (4.8 lpf) with a 2 3 / 8 ” (60mm) waste outlet as an option. Metcraft bowls and assemblies are designed to withstand 5000 lb. (22kN) loading without permanent deflection and damage. This fixture meets or exceeds ASME A112.19.3 / CSA B45.4 standards for “Stainless Steel Plumbing Fixtures”. The trap will pass a 2 1 / 8 ” (54mm) dia. ball. A minimum 1” (25mm) supply providing 35psi (241kPa) flushing pressure is required. 1.6 gpf (6.0 Lpf) Fixtures - 3" waste connection q 4110 Back supply connection 1 1 / 2 ” (38mm) FIPT. q 4115 Top supply connection 1 1 / 2 ” (38mm) MIPT. 1.28 gpf (4.8 Lpf) Fixtures - 2-3/8” waste connection q HET4110 Back supply connection 1 1 / 2 ” (38mm) FIPT. q HET4115 Top supply connection 1 1 / 2 ” (38mm) MIPT. STANDARD FEATURES Chase mounted fixture, wall outlet waste. Toilet Bowl- • Elongated. • High polished integral seat. • Self draining flushing rim. • Blowout flushing action. • Fully enclosed trap. • Hardware- • Plated steel concealed anchor rods and fasteners. INSTALLATION An accessible pipe chase is required. Six anchor rods screw into sockets on back of the fixture. Anchor rods pass through the wall and are secured with washers and hex nuts on the chase side of the wall. No exposed fasteners are used. The installer must provide wall openings for anchor rods and piping per rough-in drawing provided by Metcraft.. NOTE: A security frame (wall sleeve) is recommended when installed on a new block (CMU) or poured concrete wall. A security frame is not appropriate for hollow wall construction. Water Consumption: With a low consumption flush valve - 1.6 gpf (6 liters) With a HET consumption flush valve - 1.28 gpf (4.8 liters) Unit may be pictured with some optional features. TOILET FIXTURE - 4110 & 4115 Listed by RECOMMENDED FLUSH VALVES Item:_________ SLOAN ZURN DELANY Concealed low consumption 611-1.6 Z6611-1.6 F540-1.6 Concealed HET 611-1.28 Z6611-1.28 - Exposed low consumption 111 Z6606-1.6 F439-1.6 Exposed HET 111-1.28 Z6606-1.28 - Concealed low consumption 9603-1.6 ZH6152-WS1-MBFW 1234-1.5 Concealed HET 9603-1.28 ZH6152AV-1.28-MBFW - Exposed low consumption 111 Z6000-1.6 439 Exposed HET 111-1.28 Z6000-HET-1.28 -

Upload: others

Post on 20-Feb-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

  • 2901 NE Hagan Road - Lee’s Summit, MO 64064 v 816-554-0300 v [email protected] v www.metcraftindustries.comLinkedIn: linkedin.metcraft.pro v YouTube: youtube.metcraft.pro v Instagram: instagram.com/Metcraft_Ind/ v Twitter: https://twitter.com/MetcraftInd

    HIGH ABUSE FIXTURES

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    ► DESCRIPTION

    This Toilet Fixture is designed for high abuse areas with an accessible pipe chase. The fixture is fabricated using heavy gauge type 304 stainless steel, seamlessly welded to form a vandal resistant unit. Internal piping is stainless steel. Exposed surfaces are polished to a satin finish, except for the integral seat which is polished to a bright finish.

    ► PERFORMANCE STANDARDS

    Metcraft’s standard toilet is a 1.6 gpf (6.0 lpf) fixture with a 3’’ (76mm) waste outlet. Metcraft offers a “High Efficiency Toilet” (HET) 1.28 gpf (4.8 lpf) with a 2 3/8” (60mm) waste outlet as an option. Metcraft bowls and assemblies are designed to withstand 5000 lb. (22kN) loading without permanent deflection and damage. This fixture meets or exceeds ASME A112.19.3 / CSA B45.4 standards for “Stainless Steel Plumbing Fixtures”. The trap will pass a 2 1/8” (54mm) dia. ball. A minimum 1” (25mm) supply providing 35psi (241kPa) flushing pressure is required.

    1.6 gpf (6.0 Lpf) Fixtures - 3" waste connection

    q 4110 Back supply connection 11/2” (38mm) FIPT.q 4115 Top supply connection 11/2” (38mm) MIPT.

    1.28 gpf (4.8 Lpf) Fixtures - 2-3/8” waste connection

    q HET4110 Back supply connection 11/2” (38mm) FIPT.q HET4115 Top supply connection 11/2” (38mm) MIPT.

    STANDARD FEATURES• Chase mounted fixture, wall outlet waste.• Toilet Bowl- • Elongated. • High polished integral seat. • Self draining flushing rim. • Blowout flushing action. • Fully enclosed trap.• Hardware- • Plated steel concealed anchor rods and fasteners.

    ► INSTALLATION

    An accessible pipe chase is required. Six anchor rods screw into sockets on back of the fixture. Anchor rods pass through the wall and are secured with washers and hex nuts on the chase side of the wall. No exposed fasteners are used. The installer must provide wall openings for anchor rods and piping per rough-in drawing provided by Metcraft..

    NOTE: A security frame (wall sleeve) is recommended when installed on a new block (CMU) or poured concrete wall. A security frame is not appropriate for hollow wall construction.

    Water Consumption:With a low consumption flush valve - 1.6 gpf (6 liters)With a HET consumption flush valve - 1.28 gpf (4.8 liters)

    Unit may be pictured with some optional features.

    TOILET FIXTURE - 4110 & 4115

    Listed by

    RECOMMENDED FLUSH VALVES

    Item:_________

    SLOAN ZURN DELANY

    Concealed low consumption 611-1.6 Z6611-1.6 F540-1.6

    Concealed HET 611-1.28 Z6611-1.28 -

    Exposed low consumption 111 Z6606-1.6 F439-1.6

    Exposed HET 111-1.28 Z6606-1.28 -

    Concealed low consumption 9603-1.6 ZH6152-WS1-MBFW 1234-1.5

    Concealed HET 9603-1.28 ZH6152AV-1.28-MBFW -

    Exposed low consumption 111 Z6000-1.6 439

    Exposed HET 111-1.28 Z6000-HET-1.28 -

  • 2901 NE Hagan Road - Lee’s Summit, MO 64064 v 816-554-0300 v [email protected] v www.metcraftindustries.comLinkedIn: linkedin.metcraft.pro v YouTube: youtube.metcraft.pro v Instagram: instagram.com/Metcraft_Ind/ v Twitter: https://twitter.com/MetcraftInd

    HIGH ABUSE FIXTURES

    APPROVED FOR

    MANUFACTURING

    Company:________________________Name:_______________________

    Signature:_______________________________Date:________________

    Due to continuous product improvement Metcraft reserves the right to make changes in design and specifications without prior notice. All dimensions should be verified with the factory for current information.

    Item:_________

    OPTIONAL ACCESSORIESq A120 Security Frame (Wall Sleeve/Can). q A168 Metal Template for Wall Openings.q TSC Toilet Shipping Cover No-Hub Connectors for 1.6gpf Unitsq A210-3 3’’ s/s to 3” Cl No-hub Connector. q A210-1 3’’ s/s to 4” Cl No-hub Connector. No-Hub Connectors for 1.28gpf Unitsq A210-9 2-3/8’’ s/s to 3” Cl No-hub Connector.q A210-8 2-3/8’’ s/s to 4” Cl No-hub Connector.q A215-3 3’’ No-hub Test Tee. q A215-4 4’’ No-hub Test Tee. q A216-3 Pinned Cleanout Plug 3”q A216-4 Pinned Cleanout Plug 4”q A247 Flush valve thru wall connector.q A611 Flush Valve access Panel. (Available on 4110).q A615 Flush Valve Cover. (Available on 4115). Wall Mounted Toilet Paper Holders

    q A720 Chase Mounted Recessed Toilet Paper Holder.q A721 Front Mounted Recessed Toilet Paper Holder.q A722 Ligature Resistant Front Mounted Recessed Toilet Paper Holder.

    WALL THICKNESS AND TYPE (Must Specify)

    Thickness:________ Type: qConcrete qBlock qSteel

    TOILET WASTEq PE Plain end waste - 4” off fixture (Standard). q PL Plain end waste - 3” into chase.q GW Gasket waste outlet.

    PRODUCT OPTIONSq AFH Hydraulic Anti-Flood Valve. Not available on 4115 & HET4115. q MS High Polished Seat (Standard).q HS Hinged Seatq HO Punched for hinged seat (By Others).q PCC Powder Coat - Anti-microbial White.q ADA ADA Mounting height - 18” Integral Seat Height. * Dimensions raised 3” for ADA

    2901 NE Hagan RD. Lees Summit MO, 64064WWW.Metcraftindustries.com

    Description:

    Part No: Rev:

    Designer: Date:

    MFG:

    APPROVED:

    Zach 9/24/2019

    4110-0004Qty:Job Name:

    Shop Order:

    16"[406]

    24" [610]

    12"[305]

    14"[356]

    6.5"[165]

    12"[305]

    2901 NE Hagan RD. Lees Summit MO, 64064WWW.Metcraftindustries.com

    Description:

    Part No: Rev:

    Designer: Date:

    MFG:

    APPROVED:

    Zach 9/24/2019

    4110-0004Qty:Job Name:

    Shop Order:

    16"[406]

    24" [610]

    12"[305]

    14"[356]

    6.5"[165]

    12"[305]

    TOILET FIXTURE - 4110 & 4115

    4110HET: Off4115HET: Off4110: Off4115: OffCompany: Name: Date: 41104115Item: 41104115Thickness: 41104115B1: Off41104115B2: Off41104115B3: Off41104115B12: Off41104115B11: Off41104115B10: Off41104115B9: Off41104115B8: Off41104115B7: Off41104115B5: Off41104115B6: Off41104115B4: Off41104115B15: Off41104115B16: Off41104115B17: Off41104115B18: Off41104115B19: Off41104115B20: Off41104115B21: Off41104115B22: Off41104115B23: Off41104115B13: Off41104115B14: Off41104115B25: Off41104115B26: Off41104115B24: Off41104115B27: Off41104115B28: Off41104115B29: Off