HKPF-101/102

The HKPF-101 is a High Definition A to D converter board to convertstandard HD analog component video signals to standard HD SDI (HighDefinition Serial Digital Interface) video signal. The HKPF-102 is an HDD to A converter board, which converts standard HD SDI video signal tostandard HD analog component video signal.

Both of these boards provide an uncompressed, 10-bit, digitalcomponent SMPTE-292M HD serial stream with a bit rate of 1.5 Gbpswith conversion and distribution both being carried out on the sameboard. The HKPF-101 accepts and converts one set of Y/PB/PR or G/B/Rinput, and provides four HD SDI outputs. And the HKPF-102 accepts andconverts one HD serial digital video signal to Y/PB/PR or G/B/R analogsignal format with two sets of outputs.

The HKPF-101/102 boards can be used in the ISR (Interactive StatusReporting) System for system diagnosis. They are designed to beaccommodated in the PFV-HD300/HD50A HD digital interface unit.

High Definition A to D/D to A Converter Boards

D i g i t a lP r o c e s s i n gE q u i p m e n t

HKPF-102

HKPF-101

HD SDIOUTPUT

1

2

3

4

A/DHD ANALOG COMPONENTVIDEO INPUT

G / B / Ror

Y / PB / PR

HD SDIINPUT

D/A

HD ANALOG COMPONENTVIDEO OUTPUT

G / B / Ror

Y / PB / PR

HD ANALOG COMPONENTVIDEO OUTPUT

G / B / Ror

Y / PB / PR

HD ANALOG SYNC OUTPIT

HKPF-101 Diagram HKPF-102 Diagram

D i g i t a lP r o c e s s i n gE q u i p m e n t

Features

HKPF-101/102High Definition A to D/D to A Converter Boards

HKPF-101 High Definition A to D Converter Board• Three BNC connectors for one HD analog component

input. • Four BNC connectors for four HD SDI (HD Serial

Digital Interface) outputs. • G/B/R or Y/PB/PR selectable. • Automatically correspondent with field frequency 59.94

or 60.00 Hz. • Active line 1080 or 1035 switchable. • Support for ISR (Interactive Status Reporting) function.

HKPF-102 High Definition D to A Converter Board• G/B/R or Y/PB/PR selectable. • One BNC connector for one HD SDI (HD Serial Digital

Interface) input. • Six BNC connectors for two HD analog component

outputs. • One BNC connector for HD-Sync output.• Automatic detection of field frequency 59.94 or 60.00 Hz.• Automatic detection of Active line 1080 or 1035. • Time delay: 1000 ns or less.• Support of ISR (Interactive Status Reporting) function.

SpecificationsGeneralPower requirement +5 VDC: 1.3 A, -5 VDC: 0.7 A

(supplied from the PFV-HD300/HD50A)Power consumption Approx.11 WOperating temperature 5°C to 40°C (41°F to 104°F)Dimensions Board: 194 (H) X 310 (D) mm

(7 3/4 X 12 1/4 inches)Connector Panel: 218 (H) X 98 (D) X 25 (W) mm

(8 5/8 X 3 7/8 X 1 inches)Mass Board: Approx.700 g (1 lb 9 oz)

Connector Panel: Approx.200 g (7 oz)Cable compensation 0;10 mInput SignalsAnalog input (1each) ANALOG IN Y/G*, PB/B, PR/R connectors (BNC type)

HD analog component video signalSMPTE 240 MY/PB/PR, R/G/B selectable

Input impedance 75 Ω*Sync signal is required.

Output SignalsDigital output DIGITAL OUT connectors (BNC type) (4)

HD serial digital video signalSMPTE 292 M

Output level 0.8 Vp ±10 %, 75 ΩOutput impedance 75 Ω, unbalancedOutput return loss 15 dB or more (5 MHz to 750 MHz)

10 dB or more (750 MHz to 1.5 GHz)Jitter 270 ps or lessData rate 1.4835 Gbps (59.94 Hz), 1.4850 Gbps (60.00 Hz)

Time delay900 ns or less

ISR output informationStatus messages : 1 itemSet up messages : 3 items

HKPF-101 High Definition A to D Converter BoardGeneralPower requirement +5.1 VDC: 1.4 A, -5.1 VDC 0.7 A

(supplied from the PFV- HD300/HD50A)Power consumption Approx.10 WOperating temperature 5°C to 40°C (41°F to 104°F)Dimensions Board: 194 (H) X 310(D) mm

(7 3/4 X 12 1/4 inches)Connector Panel: 218 (H) X 98 (D) X 25 (W) mm

(8 5/8 X 3 7/8 X 1 inches)Mass Board: Approx.700 g (1 lb 9 oz)

Connector Panel: Approx.200 g (7 oz)Input SignalsDigital input DIGITAL IN connectors (BNC type) (1)

HD serial digital video signalSMPTE 292 M

Input impedance 75 Ω, unbalancedInput return loss 15 dB or more (5 MHz to 750 MHz)

10 dB or more (750 MHz to 1.5 GHz)Transmission distance 100 m or moreData rate 1.4835 Gbps (59.94 Hz)

1.4850 Gbps (60.00 Hz)Output SignalsAnalog output (2each) ANALOG OUT Y/G, PB/B, PR/R connectors (BNC type)

HD analog component video signalY/PB/PR, R/G/B selectable

Output level 1.0 Vp-p ±1 % (Y, G, B, R)0.7 Vp-p ±1 % (PB,PR)

Output impedance 75 Ω, unbalancedFrequency response ±0.1 dB (60 Hz to 20 MHz)

±0.5 dB (20 MHz to 30 MHz) Analog sync output ANALOG OUT SYNC connectors (BNC type) (1)

tri syncOutput level 0.6 Vp-p ±1 %Input impedance 75 Ω, unbalanced

Time delay1000 ns or less

ISR output informationStatus messages : 2 itemSet up messages : 3 items

HKPF-102 High Definition D to A Converter Board

MK7133/1TC-9804

©1998 Sony Corporation. All rights reserved. Reproduction in whole or in part without the written permission of Sony is prohibited. Features and specifications subject to change without notice. All Sony product names are trademarks of Sony Corporation. All non-metric weights and measures are approximate.

Distributed byPrinted in Japan

©1998 Sony Corporation