high gain antenna · 24high gain antenna its solutions high gain antenna obu (on board unit) - by...
TRANSCRIPT
24 High Gain Antenna
ITS Solutions
High Gain Antenna
OBU (On Board Unit)
- By integrating the MAC of each IEEE 802.11p, IEEE 1609.4 standard 2-Channel System implemented as a single chip.
- Crypto Engine Implementation for IEEE 1609.2 support.
- Due to the miniaturization, Simple vehicle load is possible
- In the high-speed wireless communication environment, it is possible to secure stable communication performance. The initial motivator and a chaannel estimator, diversity is equipped.
- Ensuring reliable operation in vehicle environments. Reliability and environmental conditions that is pursuant to car manufacturers Specification is
satisfied.
- Support of less than +20dBm maximum output per Port.
- Via the Mini USB jack, updates can be supported
- Through the status LED, Confirm whether communication is also possible and Power operation check is possible.
functions and characteristics.
The purpose of the OBU(On Board Unit) is user-centered next generation traffic safety services. OBU is the vehicle terminal equipment to provide more reliable customized service to our customers through the mutual communication between terminal of the vehicle during driving or stopping (OBU) and surrounding base stations (RSU, Road Side Unit).
25http://www.highgain.co.kr
ITS Solutions
Intelligent Transport System
Product
System Diagram
26 High Gain Antenna
ITS Solutions
High Gain Antenna
Specification■ Normal Specification
OBU Specification
Standards Support
IEEE 1609.2 (Security) IEEE 1609.3 (MAC/PHY) IEEE 1609.4 (Multichannel) IEEE 802.11p
Traffic Rates 3M, 4.5M, 6M, 9M, 12M,18M 24M, 27M
Channel Switching Time <= 3ms
Platform Linux
Data and Management Planes UDP/TCP and WSMP support Manages WAVE Basic Service Set(WBSS) Application Management
Frame Support Support for WAVE Data and Management Frames
Application Support
Menu-Driven tool IP Based applications WSM based applications Periodic transmit of (Difference) GPS data Remote and Logging applications
Dual Channel (Modem) Diversity / Dual Channel WAVE Modem Support
GPS Device Support for GPS Based Synchronization ublox GPS D-GPS (Optional)
Ethernet LAN I/F (100M bps)
H/W Processor : ARM926EJ Samsung S3C2450 Flash : SLC NAND Flash 256MB RAM : 64 Mbyte
UBS 2.0 USB 2.0 I/F
MMC I/F Support SD-Card for logging
27http://www.highgain.co.kr
ITS Solutions
Intelligent Transport System
■Electronic specification
OBU Specification
Frequency 5.850 to 5.925 GHz (bandwidth 10M)
RF Power Up to 20dBm
Power Switch Rocker Switch
LED T/RX LED(RF1,RF2), GPS LED, Operating LED (Front View)
Waterproof IP66
Antenna Connector FAKRA
Operate Power OBU PCB Board Operating Voltage 12V
Operate Temperature -40 ~ +85°C
Antenna Omni Antenna Gain : > 8dBi
■ Physical performance standard
Modulation accuracy
• �EVM• Spectral Flatness• Frequency Leakage
Spectrum performance
• �Transmit Power• Spectrum Emission Mask• Center Frequency and Symbol• Clock Tolerance
Receiver Test
• �Minimum Input Sensitivity• ACR• CCA
28 High Gain Antenna
ITS Solutions
High Gain Antenna
Parameter■ Physical Layer Parameter
PARAMETER
Data rate (Mandatory) 3, 4.5, 6, 9, 12, 18, 24, 27 Mbps
Modulation BPSK, QPSK, 16QAM, 64QAM
FEC Convolution
Constraint length, Code rate K=7, R=1/2, 2/3, 3/4
The number of subcarrier 52 (48 data + 4 pilot)
OFDM Symbol duration(TSYM) 8us (TFFT + TGI)
Guard Interval (TGI) 1.6us
Bandwidth 10MHz
■ Physical Layer parameter
Data rate (Mbps)
Modulation Code rateBits per
subcarrier (NBPSC)
Coded bits per OFDM symbol
(NCBPS)
# of data bits per OFDM symbol
(NDBPS)
3 BPSK 1/2 1 1x48 = 48 24
4.5 BPSK 3/4 1 1x48 = 48 36
6 QPSK 1/2 2 2x48 = 96 48
9 QPSK 3/4 2 2x48 = 96 72
12 16QAM 1/2 4 4x48 = 192 96
18 16QAM 3/4 4 4x48 = 192 144
24 64QAM 2/3 6 6x48 = 288 192
27 64QAM 3/4 6 6x48 = 288 216
29http://www.highgain.co.kr
ITS Solutions
Intelligent Transport System
DrawingTO
PBottom