High Power 8dBi Omni-Directional Outdoor Wi-Fi Antenna(for 2.4GHz 802.11b/g/n devices)

A8EXThe Amped Wireless High Power 8dBi Omni-Directional Outdoor Wi-Fi Antenna is designed to increase the signal strength and range of your 2.4GHz 802.11b/g/n Wi-Fi devices with detachable antennas. The high gain antenna provides Wi-Fi

How it Works:

Key Features

• Extend the coverage of your wireless network in all directions

• Rugged weatherproof construction with corrosion resistance

• Safe: High quality surge protector included from electrical surges

• Wall and pole mounting kit included

EXPAND YOUR WIRELESSCOVERAGE OUTDOORS

3ft Jumper Cable(RP-SMA to N-Type Female)

Up to 1 mile2

Wireless Router/Device*

The High Power Outdoor Omni-Directional Antenna puts out a strong signal in every direction for maximum performance.

Ground

Premium SurgeProtector

Premium 25ft Outdoor WiFi Antenna Cable** APC25EX

A8EX

* Not Included** The Premium 25ft Outdoor WiFi Antenna Cable is required for this installation and is sold separately

Wireless Coverage Pattern

Advanced Amped Technology:

An advanced antenna design maximizes the wireless range of the Wi-Fi device the A8EX is attached to. The A8EX increases antenna gain to 8dBi (from 0 dBi on average) and directs the wireless signal in a 360 degree pattern for a boost in wireless range and performance outdoors.

1 Wireless results may vary. To achieve a 1 mile wireless connection it is necessary to have another high power outdoor antenna on the other end of your connection. The connection must have no obstructions and have line of sight.

2 Wireless performance may vary due to environmental conditions and installation scenarios.

Up to 1mile in Range2

Wi-Fi Router/Device(Sold Separately)

devices, such as routers, access points, repeaters, and network bridges, with more powerful, 360 degree outdoor wireless coverage. The A8EX increases the signal strength and overall range of the device it is attached to.

A8EX High Power Outdoor Antenna Gain: 8dBi

OUTDOOR SERIESOUTDOOR SERIES

How to install the Outdoor Antenna

Kit Contents

Requirements

Wireless Standard: IEEE 802.11b/g/n

Frequency Band: 2.4GHz

Antenna Gain: 8 dBi

Antenna Connector: N-Type Female

VSWR: 2:0 Max

Polarization: Linear, Vertical

Antenna Pattern: • H Plane: 360 Degrees• V Plane: 15 Degrees

System Requirements:• One 802.11b/g/n Wireless Device

with detachable antenna(RJ-SMA or N-Type Female connector)

• One Premium 25ft Outdoor WiFi Antenna Cable

Package Contents: • One High Power Outdoor Wireless 8dBi

Omni-Directional Antenna• One Wall or Pole Mounting Kit• One Premium Surge Protector• One 3ft Jumper Cable (N-Type Male to RP-SMA)• One Setup Guide

Designed by Amped Wireless in the USA

Amped Wirelesswww.ampedwireless.comsales@ampedwireless.com(888) 573-8830

Product Specifications:

© 2011 Amped Wireless. All rights reserved.

Wireless 802.11b/g/n Wi-Fi device with a detachable antenna (Antenna connector: N-Type Female Jack or RJ-SMA)

APC25EX - 25 Foot Premium Outdoor Antenna Cable

or

Using the included 3ft Jumper Cable, attach the SMA Plug to the RJ-SMA antenna connector on your wireless device.

Connect the other end of the Jumper cable to the included Premium Surge Protector.

Use the Premium 25ft Outdoor Antenna Cable (Sold Separately) to:a) Connect one end to the Surge Protector and...b) Extend your installation outdoors

3

21

Ground

3a21

Premium Surge Protector

Jumper Cable3b Premium 25ft Outdoor WiFi Antenna Cable (Sold Separately)

APC25EX

High Power Outdoor 8dBi Omni-Directional WiFi Antenna

Mounting Kit: Pole or Wall Mounting

Premium Surge Protector: Protection from Lightning Surges

3ft N-Plug to RP-SMA Jumper Cable: Easy connection to standard wireless devices with detachable antennas (SMA antenna connectors)

EXPAND YOUR WIRELESSCOVERAGE OUTDOORS