high pressure triplex mud pump units from … · herrenknecht vertical gmbh high pressure triplex...
TRANSCRIPT
HERRENKNECHT VERTICAL GMBH
HIGH PRESSURE TRIPLEX MUD PUMP UNITS FROM HERRENKNECHT VERTICAL: TAILORED TO CUSTOMER REQUIREMENTS
MUD PUMP UNITS
High reliability Low noise level Low maintenance Short setup time Small footprint Made in Germany
In cooperation with
Special features are always possible due to
customized production.
EVERY UNIT SPECIFICALLY ADAPTED TO CUSTOMER REQUIREMENTS
The mud pump unit TSP series from Herrenknecht Vertical, a newly designed triplex mud pump unit rated for a maximum operating pressure of 517 bar (7,500 psi), is completely “Made in Germany”. The mud pumps from the renown German pump manufacturer Schäfer & Urbach are electrically driven by AC or DC motors which are either water- or air-cooled. The mud pumps have no internal pinion with inside gearing. The power from the electric motor is transmitted to the mud pump via a spur gearbox. The complete mud pump unit is mounted on a skid and therefore easy to handle.
Basic features: Mud pump Gearbox Electric motor Lube circuit Cooling circuit Liner flush system Oilfield skid
Key benefits: Ball joint heads are used in the power unit
instead of crossheads. Accordingly, no shear forces develop. Both maintenance and the costs associated with servicing are reduced.
The use of a four-fold mounted crank-shaft and the elimination of an internal pinion shaft allows us to grant an extend-ed guarantee period for the power unit.
A dumping chamber prevents the water/mud and gear oil from intermixing; which means less servicing and greater environ-mental protection.
Optional features: Hydraulic quick release for valve covers
and liners Pulsation dampener Relief line with safety valve High pressure manifolds Suction manifold Charge pump Noise protection Jib crane Variable frequency drive
TECHNICAL DETAILS MUD PUMP UNIT TSP SERIES
2950
2980
8750
8750
330038
7033
10
Max. input power: 800 kW (1,000 hp)
Max. discharge flow: 2,428 l/min (640 gpm)
Max. operating pressure: 517 bar (7,500 psi)
Max. liner x max. stroke: 6.5 ” x 8 ”
Max. number of revolutions: 180 rpm
Drive: AC or DC electric motor, diesel or diesel-hydraulically
Transmission: spur gear
T S P 6 5 - 8 0Max. input power: 1,000 kW (1,300 hp)
Max. discharge flow: 2,793 l/min (740 gpm)
Max. operating pressure: 517 bar (7,500 psi)
Max. liner x max. stroke: 7 ” x 10 ”
Max. number of revolutions: 150 rpm
Drive: AC or DC electric motor
Transmission: spur gear
T S P 7 0 - 1 0 0
Configuration type “Basic” Oilfield skid Single spur gear Water- or air-cooled
Configuration type “Standard” Oilfield skid Single spur gear Water-cooled Noise protection
Available with: TSP 65-80 TSP 70-100 TSP 75-120 TSP 80-120
Available with: TSP 70-100 TSP 75-120 TSP 80-120
3200
6900 2980
2900
6900
2980
6050
3870
3280 29
80
2980 36
00 3870
2980
2980
3300
2950
2980
8750
8750
330038
7033
10
Max. input power: 1,200 kW (1,600 hp)
Max. discharge flow: 3,390 l/min (895 gpm)
Max. operating pressure: 517 bar (7,500 psi)
Max. liner x max. stroke: 7,5 ” x 12 ”
Max. number of revolutions: 130 rpm
Drive: AC or DC electric motor
Transmission: spur gear
T S P 7 5 - 1 2 0Max. input power: 1,600 kW (2,200 hp)
Max. discharge flow: 3,857 l/min (1,019 gpm)
Max. operating pressure: 517 bar (7,500 psi)
Max. liner x max. stroke: 8 ” x 12 ”
Max. number of revolutions: 130 rpm
Drive: AC or DC electric motor
Transmission: spur gear or double spur gear
T S P 8 0 - 1 2 0
Configuration type “Offshore” Oilfield skid Double spur gear Water- or air-cooled
Available with: TSP 80-120
The TSP series fit ideal to the TI deep drilling rigs from
Herrenknecht Vertical.
OVERVIEW HERRENKNECHT VERTICAL MUD PUMP UNIT TSP SERIES
Max. input power 800 kW 1,000 kW 1,200 kW 1,600 kW (based on 90 % (1,000 hp) (1,300 hp) (1,600 hp) (2,200 hp)mechanical efficiency)
Max. operating pressure
standard 5,000 psi 5,000 psi 5,000 psi 7,500 psi
optional 7,500 psi 7,500 psi 7,500 psi –
Max. discharge flow 2,428 l/min 2,793 l/min 3,390 l/min 3,857 l/min(based on 100 % [640 gpm] [740 gpm] [895 gpm] [1,019 gpm]volumetric efficiency)
Max. number of revolutions 180 rpm 150 rpm 130 rpm 130 rpm
Weight in basic 27,000 kg 32,000 kg 38,000 kg 45,000 kgconfiguration approx.
TSP 65-80 TSP 70-100 TSP 75-120 TSP 80-120
M U D P U M P U N I T T S P S E R I E S
PERFORMANCE CURVES MUD PUMP UNITS
C H A R A C T E R I S T I C D I A G R A M
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500
Max. discharge flow at max. rpm [l / min]
Pressure[bar]
500
400
300
200
100
0
TSP 65-80 / 1,000 hp
TSP 70-100 / 1,300 hp
TSP 75-120 / 1,600 hp
TSP 80-120 / 2,200 hp
AUTOMATED RIG TECHNOLOGY
Herrenknecht Vertical GmbH, a subsidiary of Herrenknecht
AG, designs and manufactures deep drilling rigs and
equipment for wells down to 8,000 meters. The innovative
rigs are specifically adapted to customer and project
requirements offering high technical standards based on
offshore technology and a number of new developments.
Central features comprise an optimized safety concept
(hands-off technology) and flexible energy management,
comprehensive automation of working processes to increase
time savings as well as integrated noise protection devices
to benefit our environment.
10 / 2
017
| HK2
603
HERRENKNECHT VERTICAL GmbHIm Heidenwinkel 5D-77963 SchwanauPhone +49 7824 302-1300 Fax +49 7824 302-1330info@herrenknecht-vertical.comwww.herrenknecht-vertical.com