high quality stainless steel shackles

Uk Manufacturers of High QualityStainless Steel Lifting Shackes

Industrial Lifting, Utilities & Offshore Applications

www.liftingshackles.com www.petersen-stainless.co.uk

Contents

High Tensile Stainless Steel D Shackles........................................................................................ ................02

High Tensile Stainless Steel Bow Shackles........................................................................................... ........03

High Corrosion Resistance Stainless Steel D Shackles with Safety Pin......................................... .................04

High Corrosion Resistance Stainless Steel Bow Shackles with Safety Pin......................................................05

High Corrosion Resistance Stainless Steel Chain Link D Shackles....................................................... .........06

Industrial Lifting Blocks Tufnol & Stainless Steel....................................................................................... .....07

High Corrosion Resistance Tested Turnbuckles/Bottle Screws Jaw/Jaw................................................... .....08

High Corrosion Resistance Tested Turnbuckles/Bottle Screws Jaw/eye.............................................. ..........09

High Corrosion Resistance Tested Turnbuckles/Bottle Screws eye/eye..................................................... ....10

Stainless Steel Wire Ropes (AISI 316) ....................................................................................................11

Stainless Steel Wire Rope Clips (Bulldog Grips) ....................................................................................15

High Tensile Stainless Steel Thimbles......................................................................................... ..................16

Round Polyester Lifting Slings...................................................................................................... ...............17

Certification................................................................................................................................... ..............18

Information..................................................................................................................................................20

High Tensile Stainless Steel D Shackles

02 | Industrial Lifting, Utilities & Offshore Applications

Dimensions & WLL Pin styLes & ProDuct numbers nominaL WeightPer shackle

WLL (t)

Pin Dia (P)

body Dia (b)

Jaw gap (J)

inside L a type Pin aL type Pin b type Pin e type Pin e type Pin c/w nylok

1.0 10.0 8.0 16.0 32.0 PH1TA PH1TAL PH1TB PH1TE PH1TE-NY 85g










Type A Type AL Type B Type E

Typical Applications

General lifting in off-shore applicationsGeneral lifting and tethering in leisure marine applications

General lifting purposes

Product Features

Manufactured from 17/4PH precipitation hardening martensitic stainless steel

Excellent for general lifting applications - high tensile properties while avoiding work hardening

Corrosion resistance similar to 18/8 grade steels

Factor of Safety 6:1

Available with 4 pin types - Standard Screw Collar Pin (A Type), Extended Screw Collar Pin (AL Type), Countersunk Head (B Type), E Type Safety Pin (E Type)

Manufactured using the latest technology in electrical upset forging Quality Features

Every shackle is proof tested to 2 x WLL and certified at our manufacturing facility in the North East of England

All shackles are manufactured in accordance with the Machine Directive 2006/42/EC

Inspection certificate BS EN 10204 3.1b available on request

High quality finish and excellent polish

High Tensile Stainless Steel Bow Shackles

Industrial Lifting, Utilities & Offshore Applications | 03

Dimensions & WLL Pin styLes & ProDuct numbers nominaL Weight Per shackle

WLL (t)

Pin Dia (P)

body Dia (b)

Jaw gap (J)

inside bow (W)

inside L a type Pin aL type Pin b type Pin e type Pine type Pin c/w nylok

0.8 10.0 8.0 16.0 24.0 32.0 PHB008TA PHB008TAL PHB008TB PHB008TE PHB008TE-NY 90g


2.5 16.0 12.7 25.0 38.0 50.0 PHB025TA PHB025TAL PHB025TB PHB025TE PHB025TB-NY 368g








Type A Type AL Type B Type E


General lifting in off-shore applications

General lifting and tethering in leisure marine applications


Product Features

Manufactured from 17/4PH precipitation hardening martensitic stainless steel

Excellent for general lifting applications - high tensile properties while avoiding work hardening

Corrosion resistance similar to 18/8 grade steels


Available with 4 pin types - Standard Screw Collar Pin (A Type), Extended Screw Collar Pin (AL Type), Countersunk Head (B Type), E Type Safety Pin (E Type)

Manufactured using the latest technology in electrical upset forging

Quality Features





High Corrosion Resistance Stainless Steel D Shackles with Safety Pin

Dimensions & WLL Pin styLes & ProDuct numbers nominaL Weight Per shackleWLL bolt size (P) body Dia (b) Jaw gap (J) inside L e type Pin e type Pin c/w nylok

350kgs M6 Bolt 6.0 13.0 25.0 ED6M6 ED6M6-NY 48g






2800 kgs M20 Bolt 16.0 32.0 64.0 ED16M20 ED16M20-NY 760g





Water utility installations & other corrosive facilities

Pump chains and pump lifting

Chemical installations - Chlorine plants etc




Product Features

Manufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)

Excellent for lifting applications where a high level of corrosion resistance is required.


Available with 2 pin types - E Type Safety Pin with Standard Nut (E Type) or Nylok Nut (E Type-NY)

Special design of bolt ensures the nut is positioned correctly allowing sufficient room for the cotter pin

Quality Features






D Shackle Pin









High Corrosion Resistance Stainless Steel Bow Shackles with Safety Pin

Dimensions & WLL Pin styLes & ProDuct numbers nominaL Weight Per shackleWLL bolt size (P) body Dia (b) Jaw gap (J) inside bow inside L e type Pin e type Pin c/w nylok

280kgs M6 Bolt 6.0 13.0 19.0 28.0 EB6M6 EB6M6-NY 52g






2500 kgs M20 Bolt 16.0 32.0 50.0 68.0 EB16M20 EB16M20-NY 805g

3000 kgs M22 Bolt 19.0 38.0 58.0 76.0 EB19M22 EB19M22-NY 1250g


4500kgs M27 Bolt 25.4 50.0 76.0 100.0 EB25M27 EB25M27-NY 27oog

Bow Shackle Pin








Product Features

Manufactured from Stainless Steel EN10088 1.4401/4 (Marine Grade 316)

Excellent for lifting applications where a high level of corrosion resistance is required


Available with 2 pin types - E Type Safety Pin with Standard Nut (E Type) or Nylok Nut (E Type-NY)

Special design of bolt ensures the nut is positioned correctly allowing sufficient room for the cotter pin

Quality Features







High Corrosion Resistance Stainless Steel Chain Link D Shackles

Typical ApplicationsWater utility installations & other corrosive facilities


Chain Link Shackle Safety pin Brace pin

Dimensions & WLL ProDuct number

nominaL Weight Per shackle

WLL (t)

Pin Dia (P) Boday Dia (B) Jaw Gap (J) Inside L R C

1 12.5 9.5 20.0 25.0 2.0 15.0 CTS1T 150g

2 19.0 16.0 32.0 40.0 3.0 22.0 CTS2T 55g

3.2 22.0 19.0 38.0 45.0 4.0 28.0 CTS32T 1000g

5 25.0 22.0 44.0 55.0 4.0 29.0 CTS5T 1900g

6 28.0 25.0 51.0 65.0 4.0 34.0 CTS6T 2300g

Product FeaturesManufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)



Unique design enabling the shackle to be made captive to a chain sling without the need for welding

The special Brace pin allows the shackle to be permanently attached to the chain on-site. This results in the shackle becoming part of the chain assembly

The extended load pin is fitted with a split pin to ensure that the load pin remains in position even under vibration

All shackles CE marked and supplied with instruction leaflet on safe use and storage

Quality FeaturesEvery shackle is proof tested to 2 x WLL and certified at our manufacturing facility in the North East of England






Industrial Lifting Blocks Tufnol & Stainless Steel

block sizemax rope Diameter mm

max rope circumference mm

sheave Diameter mm

sheave Width mm

eW Dimension mm

eL Dimension mm

maximum WLL Kgs

suggested shackles

4 16.0 50.0 83.0 19.0 17.0 34.0 1000 ED12M12

6 19.0 62.0 95.0 22.0 20.0 40.0 1500 ED14M16

12 25.0 74.0 121.0 30.0 28.0 50.0 2800 ED16M20

14 32.0 103.0 144.0 36.0 30.0 60.0 3500 ED22M24

Double Eye Single Eye Single Eye View Eye Dimension

Block Fitting

Sheaves

Typical ApplicationsHigh Towers and liness where weight carried is of prime importance

Double blocks are used in pairs by electricty boards for live line working

General lifting in off-shore application


Product FeaturesManufactured from Stainless Steel EN10088 1.4404 (Marine Grade 316L)



All sizes are of a bolted construction and can simply be dismantled for replacement of sheaves or other damaged parts

All shackles CE marked and supplied with instruction leaflet on safe use and storage

Quality Features Every block is proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England

All blocks are manufactured in accordance with the Machine Directive 2006/42/EC



block sizemax rope Diameter mm

ProDuct coDes ProDuct Weights

single Double triple Kgs Kgs Kgs

4 16.0 BBSE4 BBDE4 BBTE4 1.06 1.50 1.80

6 19.0 BBSE6 BBDE6 BBTE6 1.90 2.40 2.90

12 25.0 BBSE12 BBDE12 BBTE12 5.70 4.80 9.10

14 32.0 BBSE14 BBDE14 BBTE14 7.67 6.80 12.25


High Corrosion Resistance Tested Turnbuckles/Bottle Screws Jaw/Jaw


Thread WLL Wire Dia Pin C T Min L Max L Weight

1/4”unf 200Kgs 3.0 6.0 12.5 6.2 135.0 205.0 80g RSFF03-WLL

5/16”unf 325Kgs 4.0 8.0 17.0 7.9 165.0 240.0 170g RSFF04-WLL

3/8”unf 500Kgs 5.0 9.5 19.0 9.9 200.0 300.0 282g RSFF05-WLL

7/16”unf 700Kgs 6.0 11.0 20.0 10.9 220.0 330.0 398g RSFF06-WLL

1/2”unf 825Kgs 7.0 12.0 25.0 12.7 260.0 390.0 614g RSFF07-WLL

5/8”unf 1325Kgs 8.0 14.0 28.0 13.5 325.0 480.0 1260g RSFF08-WLL

5/8”unf 1325Kgs 10.0 16.0 32.0 15.8 345.0 500.0 1434g RSFF10-WLL

3/4”unf 1825Kgs 12.0 19.0 38.0 17.8 400.0 570.0 2418g RSFF12-WLL

7/8”unf 2500Kgs 14.0 22.0 45.0 22.0 450.0 640.0 3577g RSFF14-WLL

1”unf 3300Kgs 16.0 25.0 50.0 25.0 520.0 760.0 5340g RSFF16-WLL

1 1/8”unf 4300Kgs 19.0 28.0 58.0 28.2 585.0 855.0 5618g RSFF19-WLL

1 1/4”unf 5500Kgs 22.0 32.0 64.0 31.5 635.0 920.0 7711g RSFF22-WLL

1 3/8”unf 6600Kgs 26.0 35.0 70.0 34.8 715.0 1040.0 14085g RSFF26-WLL

Turnbuckle

Fork End







Product Features




All CE marked and supplied with instruction leaflet on safe use and storage

Quality Features

Every turnbuckle is proof load tested to 2 x WLL and certified at our manufacturing facility in the North East of England

All turnbuckles are manufactured in accordance with the Machine Directive 2006/42/EC

Inspection certificate BS EN 10204 3.1b available on request.



High Corrosion Resistance Tested Turnbuckles/Bottle Screws Jaw/Eye


Thread WLL Wire Dia Pin H C T FT Min L Max L Weight

1/4”unf 200Kgs 3.0 6.0 6.35 12.5 5.0 6.2 127.0 197.0 67g RSFE03-WLL

5/16”unf 325Kgs 4.0 8.0 8.00 17.0 6.5 7.9 154.0 232.0 135g RSFE04-WLL

3/8”unf 500Kgs 5.0 9.5 9.53 19.0 7.8 9.9 189.0 289.0 235g RSFE05-WLL

7/16”unf 700Kgs 6.0 11.0 11.10 20.0 9.5 10.9 207.0 316.0 332g RSFE06-WLL

1/2”unf 825Kgs 7.0 12.0 12.70 25.0 11.5 12.7 244.0 376.0 521g RSFE07-WLL

5/8”unf 1325Kgs 8.0 14.0 14.30 28.0 13.5 13.5 300.0 456.0 1093g RSFE08-WLL

5/8”unf 1325Kgs 10.0 16.0 16.00 32.0 15.0 15.8 325.0 380.0 1198g RSFE10-WLL

3/4”unf 1825Kgs 12.0 19.0 19.05 38.0 17.5 17.8 373.0 544.0 1952g RSFE12-WLL

7/8”unf 2500Kgs 14.0 22.0 22.20 45.0 21.5 22.0 415.0 610.0 3048g RSFE14-WLL

1”unf 3300Kgs 16.0 25.0 25.40 50.0 23.5 25.0 485.0 724.0 4407g RSFE16-WLL

1 1/8”unf 4300Kgs 19.0 28.0 28.58 58.0 27.5 28.2 548.0 818.0 4364g RSFE19-WLL

1 1/4”unf 5500Kgs 22.0 32.0 32.00 64.0 31.0 31.8 595.0 879.0 5992g RSFE22-WLL

1 3/8”unf 6600Kgs 26.0 35.0 35.00 70.0 33.5 34.8 672.0 996.0 12122g RSFE26-WLL

Turnbuckle

Fork End







Product Features





Quality Features






High Corrosion Resistance Tested Turnbuckles/Bottle Screws Eye/Eye

Turnbuckle

Turnbuckle







Product Features





Quality Features






Thread WLL Wire Dia H T Min L Max L Weight

1/4”unf 200Kgs 3.0 6.35 5.0 120.0 190.0 54g RSEE03-WLL

5/16”unf 325Kgs 4.0 8.00 6.5 143.0 221.0 100g RSEE04-WLL

3/8”unf 500Kgs 5.0 9.53 7.8 177.0 277.0 188g RSEE05-WLL

7/16”unf 700Kgs 6.0 11.10 9.5 193.0 301.0 266g RSEE06-WLL

1/2”unf 825Kgs 7.0 12.70 11.5 221.0 363.0 428g RSEE07-WLL

5/8”unf 1325Kgs 8.0 14.30 13.5 279.0 435.0 926g RSEE08-WLL

5/8”unf 1325Kgs 10.0 16.00 15.0 303.0 459.0 962g RSEE10-WLL

3/4”unf 1825Kgs 12.0 19.05 17.5 346.0 517.0 1486g RSEE12-WLL

7/8”unf 2500Kgs 14.0 22.20 21.5 383.0 580.0 2519g RSEE14-WLL

1”unf 3300Kgs 16.0 25.40 23.5 452.0 691.0 3474g RSEE16-WLL

1 1/8”unf 4300Kgs 19.0 28.58 27.5 510.0 780.0 3710g RSEE19-WLL

1 1/4”unf 5500Kgs 22.0 32.00 31.0 557.0 841.0 4273g RSEE22-WLL

1 3/8”unf 6600Kgs 26.0 35.00 33.5 628.0 952.0 10159g RSEE26-WLL


Stainless Steel Wire Ropes (AISI 316)

contruction 1x19

Product code Diameter (mm) m.b.L (kn) m.b.L (Kg) Weight Kg/100m

WR01(1x19) 1.0 0.87 99 0.49

WR015(1x19) 1.5 1.86 190 1.11

WR02(1x19) 2.0 3.30 337 1.98

WR025(1x19) 2.5 5.15 525 3.10

WR03(1x19) 3.0 7.42 757 4.46

WR035(1x19) 3.5 10.10 1,030 6.07

WR04(1x19) 4.0 13.20 1,350 7.93

WR05(1x19) 5.0 20.60 2,100 12.40

WR06(1x19) 6.0 29.70 3,030 17.80

WR07(1x19) 7.0 37.80 3,850 24.30

WR08(1x19) 8.0 49.40 5,040 31.70

WR10(1x19) 10.0 77.20 7,870 49.50

WR12(1x19) 12.0 104.00 10,600 71.30

WR14(1x19) 14.0 131.00 13,400 97.10

WR16(1x19) 16.0 176.00 17,940 127.00

WR19(1x19) 19.0 233.00 23,751 176.00

WR22(1x19) 22.0 299.00 30,479 236.00

WR26(1x19) 26.0 416.00 42,405 330.00


Leisure Marine Industry





Product Features

Sold as bespoke lengths to suit application or in 250m and 500m reels

Varying constructions and wire sizes

Austenitic condition to give maximum corrosion resistance

Dimensions and tensile grades conforming to BS MA 29

Wire rope slings available, cut and manufactured to custom lengths

Quality Features




contruction 1x37


WR18(1x37) 18.0 227.50 23,211 159

WR20(1x37) 20.0 292.40 29,862 204

WR22(1x37) 22.0 322.00 32,844 241

WR24(1x37) 24.0 387.00 39,474 289

WR26(1x37) 26.0 445.00 45,390 333

WR28(1x37) 28.0 510.00 52,025 389

WR30(1x37) 30.0 595.00 60,700 449

WR32(1x37) 32.0 679.00 69,260 504

contruction comPacteD stranD 1x7


WR02(1x7)-C 2.0 4.11 440 2.2

WR025(1x7)-C 2.5 6.76 690 3.4

WR03(1x7)-C 3.0 9.81 1,000 4.9

WR035(1x7)-C 3.5 13.33 1,360 6.8

WR04(1x7)-C 4.0 17.46 1,780 8.8



WR04(1x19)-C 4.0 17.46 1,780 9.1

WR05(1x19)-C 5.0 25.49 2,600 14.2

WR06(1x19)-C 6.0 35.29 3,600 20.5

WR07(1x19)-C 7.0 49.02 5,000 27.9

WR08(1x19)-C 8.0 61.76 6,300 36.5

WR10(1x19)-C 10.0 98.04 10,000 57.0

WR12(1x19)-C 12.0 143.15 14,500 82.1



WR14(1x36)-C 14.0 194.11 19,800 115.0

WR16(1x36)-C 16.0 253.92 25,900 149.9



WR19(1x31)-C 19.0 313.92 32,000 206



contruction 7x7


WR01(7x7) 1.0 0.56 57 0.38

WR012(7x7) 1.2 1.13 115 0.50

WR015(7x7) 1.5 1.26 128 0.86

WR018(7x7) 1.8 1.82 186 1.30

WR02(7x7) 2.0 2.24 228 1.54

WR025(7x7) 2.5 3.49 356 2.40

WR03(7x7) 3.0 5.03 513 3.46

WR04(7x7) 4.0 8.94 912 6.14

WR05(7x7) 5.0 14.00 1,430 9.60

WR06(7x7) 6.0 20.10 2,050 13.80

WR07(7x7) 7.0 27.40 2,790 18.80

WR08(7x7) 8.0 35.80 3,650 24.60

WR10(7x7) 10.0 55.90 5,700 38.40

WR012(7x7) 12.0 81.10 8,270 55.30

WR14(7x7) 14.0 109.84 11,200 82.32

WR16(7x7) 16.0 144.16 14,700 107.52

WR18(7x7) 18.0 182.40 18,600 131.32

contruction 7x19


WR015(7x19) 1.5 1.25 128 0.90

WR02(7x19) 2.0 2.08 212 1.49

WR025(7x19) 2.5 3.26 332 2.33

WR03(7x19) 3.0 4.69 478 3.35

WR035(7x19) 3.5 6.39 652 4.56

WR04(7x19) 4.0 8.34 850 5.95

WR05(7x19) 5.0 13.00 1,330 9.30

WR06(7x19) 6.0 18.80 1,920 13.40

WR07(7x19) 7.0 25.50 2,600 18.20

WR08(7x19) 8.0 33.40 3,410 23.80

WR10(7x19) 10.0 52.10 5,310 37.20

WR12(7x19) 12.0 75.10 7,660 53.60

WR14(7x19) 14.0 102.00 10,100 72.90

WR16(7x19) 16.0 133.00 13,600 95.50



contruction 6x36Ws + iWrc


WR06(6x36)-I 6.0 20.08 2,047 14.6

WR08(6x36)-I 8.0 35.70 3,641 26.0

WR10(6x36)-I 10.0 55.90 5,700 40.9

WR12(6x36)-I 12.0 80.50 8,210 58.9

WR13(6x36)-I 13.0 94.44 9,630 71.6

WR14(6x36)-I 14.0 110.0 11,200 80.2

WR16(6x36)-I 16.0 143.0 14,600 105.0

WR18(6x36)-I 18.0 181.00 18,500 133.0

WR20(6x36)-I 20.0 224.0 22,800 164.0

WR22(6x36)-I 22.0 271.00 27,600 198.0

WR24(6x36)-I 24.0 322.0 32,800 236.0

WR26(6x36)-I 26.0 354.00 36,100 276.0

WR28(6x36)-I 28.0 410.00 41,800 321.0

WR30(6x36)-I 30.0 471.00 48,000 368.0

contruction 18x17 + iWrc


WR03(18x7)-I 3.0 4.66 475 4.8

WR04(18x7)-I 4.0 8.50 867 6.4

WR05(18x7)-I 5.0 12.90 1,320 10.0

WR06(18x7)-I 6.0 18.50 1,890 14.4

WR07(18x7)-I 7.0 25.20 2,570 19.6

WR08(18x7)-I 8.0 33.0 3,370 25.7

WR10(18x7)-I 10.0 51.50 5,250 40.1

WR12(18x7)-I 12.0 74.20 7,570 57.7

WR14(18x7)-I 14.0 100.90 10,289 75.2

WR16(18x7)-I 16.0 129.30 13,179 101.5

We offer a wide range of Stainless Steel wire Ropes for all applications. Please contact us for other wire sizes and constructions.


We offer a wide range of Stainless Steel wire Ropes for all applications. Please contact us for other wire sizes and constructions.

Stainless Steel Wire Rope Clips (Bulldog Grips)

LightWeight version - stainLess steeL graDe 316 to Din 741

Dimensions & WLL ProDuct numberWire Dia a b D1 h1 h2 t Weight

2.0 17.0 11.0 M3 17.5 10.00 10.0 0.00070 CLIPL-02

3.0 18.0 12.0 M3 21.0 11.00 10.0 0.01200 CLIPL-03

4.0 21.0 14.0 M4 23.0 13.00 11.0 0.01400 CLIPL-04

5.0 25.0 15.0 M5 28.0 15.00 12.0 0.01500 CLIPL-05

6.0 28.0 17.0 M6 32.0 17.00 16.0 0.02100 CLIPL-06

8.0 31.0 21.0 M6 36.0 20.00 18.0 0.04100 CLIPL-08

10.0 36.0 25.0 M8 44.0 23.00 19.0 0.06800 CLIPL-10

14.0 47.0 28.0 M10 55.0 25.50 26.0 0.13000 CLIPL-14

16.0 52.0 32.0 M12 65.0 28.00 26.0 0.21000 CLIPL-16

19.0 58.0 38.0 M12 78.0 32.0 30.0 0.28000 CLIPL-19

22.0 64.0 40.0 M12 86.0 43.50 32.0 0.4000 CLIPL-22

25.0 69.0 46.0 M14 94.0 43.50 32.0 0.44000 CLIPL-25

stainLess steeL graDe 316 to american FeDeraL sPeciFication

Dimensions & WLL ProDuct numberWire Dia a b1 b2 D h1 h2 L Weight

2.0 9.0 4.0 13.0 M3 18 11.0 14.0 0.00080 CLIP-02

3.0 12.0 5.0 16.0 M4 25 12.0 17.0 0.01500 CLIP-03

4.0 13.0 6.0 18.0 M4 25 14.0 19.0 0.02900 CLIP-04

5.0 15.0 7.0 20.0 M5 29 15.0 24.0 0.03100 CLIP-05

6.0 18.0 8.0 21.0 M6 31 17.0 27.0 0.04000 CLIP-06

8.0 23.0 10.0 27.0 M8 41 21.0 34.0 0.07700 CLIP-08

10.0 28.0 12.0 34.0 M10 52 25.0 45.0 0.17000 CLIP-10

12.0 35.0 14.0 38.0 M12 61 28.0 51.0 0.26500 CLIP-12

14.0 42.0 15.0 43.0 M12 68 32.0 52.0 0.31000 CLIP-14

16.0 42.0 18.0 47.0 M14 76 36.0 60.0 0.50000 CLIP-16

19.0 50.0 20.0 51.0 M14 79 40.0 62.0 0.58000 CLIP-19

22.0 60.0 26.0 61.0 M16 98 46.0 72.0 0.80000 CLIP-22

25.0 62.0 29.0 61.0 M16 110 49.0 76.0 1.08000 CLIP-25

Product Features

Manufactured in accordance with American Federal Specification & DIN 741

Free from sharp edges - good smooth finish all round

High corrosion resistance

Quality Features



Wire Rope Slings




Correct Use

There is a lot of wrong information in the field regarding the right way to install wire rope slips, the most common being that the clips should be staggered during installation. Since more friction equals more efficiency, it stands to reason that the saddle, because of its larger surface area, must be installed on the live side of the rope. Having the saddle on the live side also greatly reduces the possibility of rope damage.

Please visit our website www.liftingshackles.com for more details.

Wire rope Clip Top Down American Fed Spec

Wire Rope Clip DIN 741


High Tensile Stainless Steel Thimbles

stainLess steeL graDe 316 high quaLity Wire thimbLes

Dimensions & WLL ProDuct numbers

groove Width a b thickness Weight (kgs) per 100 pcs

2.0 12.0 8.0 1.0 0.30 THIM-020

2.5 16.0 10.0 1.0 0.40 THIM-025

3.0 16.0 10.0 1.0 0.40 THIM-030

4.0 17.0 11.0 1.0 0.50 THIM-040

5.0 20.0 13.0 1.0 0.60 THIM-050

6.0 25.0 16.0 1.2 1.00 THIM-060

7.0 28.0 18.0 1.2 1.20 THIM-070

8.0 32.0 20.0 1.4 1.80 THIM-080

10.0 40.0 26.0 1.6 2.90 THIM-100

12.0 45.0 28.0 2.0 4.60 THIM-120

14.0 56.0 34.0 2.2 9.00 THIM-140

16.0 62.0 37.0 2.5 10.40 THIM-160

18.0 68.0 42.0 2.8 17.10 THIM-180

20.0 75.0 46.0 3.4 27.70 THIM-200

22.0 85.0 50.0 3.6 29.70 THIM-220

24.0 94.0 58.0 4.5 54.90 THIM-240

26.0 102.0 66.0 4.5 60.50 THIM-260

Product FeaturesFree from sharp edges - good smooth finish all round

High corrosion resistance

Quality FeaturesHigh quality finish and excellent polish

Typical ApplicationsWire Rope Slings




Thimble Thimble Down


Round Polyester Lifting Slings

Flat Webbing Slings Flat Webbing Slings Round Slings Round Slings

Product Features

Individual certificates provided with each sling

Flat Webbing slings have protected eye sections.

PoLyester rounD LiFting sLings (Fibre enDLess) en 1492-2 Fos 7:1

Dimensions, coLours & WLL

ProDuct numberWLL Width (mm) colour

1t 44.0 Violet 1000 800 2000 1400 1000 RLS1T-L

2t 46.0 Green 2000 1600 4000 2800 2000 RLS2T-L

3t 60.0 Yellow 3000 2400 6000 4200 3000 RLS3T-L

4t 67.0 Grey 4000 3200 8000 5600 4000 RLS4T-L

5t 78.0 Red 5000 4000 10000 7000 5000 RLS5T-L

6t 83.0 Brown 6000 48000 12000 84000 6000 RLS6T-L

8t 95.0 Blue 8000 64000 16000 11200 8000 RLS8T-L

10t 112.0 Orange 10000 8000 20000 1400 10000 RLS10T-L

Sold in 0.5m increments from 1m to 10m. Replace L with the length of the EWL - Effective Working Length

straight (WLL) Kgs

choked (WLL) Kgs

basket (WLL) Kgs

7-45 degree basket (WLL) Kgs


FLat Webbing sLings (DuPLex DoubLe PLy) en 1492-1 Fos 7:1

Dimensions, coLours & WLL

ProDuct numberWLL Width (inch) colour

1t 1 Violet 1000 800 2000 1400 1000 FLS1T-L

2t 2 Green 2000 1600 4000 2800 2000 FLS2T-L

3t 3 Yellow 3000 2400 6000 4200 3000 FLS3T-L

4t 4 Grey 4000 3200 8000 5600 4000 FLS4T-L

5t 5 Red 5000 4000 10000 7000 5000 FLS5T-L

6t 6 Brown 6000 48000 12000 84000 6000 FLS6T-L

8t 8 Blue 8000 64000 16000 11200 8000 FLS8T-L

10t 10 Orange 10000 8000 20000 1400 10000 FLS10T-L

Sold in 0.5m increments from 1m to 10m. Replace L with the length of the Sling - Bearing Point to Bearing Point

straight (WLL) Kgs

choked (WLL) Kgs

basket (WLL) Kgs




Certification

Samples of our test and inspection certificates

We test all lifting shackles and turnbuckles to proof load at our factory before despatch. We also manufacture all lifting shackles and equipment in accordance with the 2006/42/EC Machine Directive. This allows us to stamp each product with the CE mark.

We have detailed below a sample of certificates available with all litfting shackles and equipment.

Decloration of conformity


Instruction and guidance 2006/42/ECInstruction and guidance 2006/42/EC

Material Certificate Proof of load and WLL test certificate


Information

What is upset forging?

Upset forging is a metal shaping process in which a heated workpiece is gripped between split female dies whilst a heading die (sometimes referred to as the punch) is forced against the workpiece, deforming and enlarging the area of the workpiece. Special die cavities allow us to control the workpiece geometry until it achieves its final shape.

Why do we use electrical upset forging?

Mechanical upsetters can only gather about 2.5 diameters per blow, parts with large heads must be made with multiple blows. This can weaken the final forging because of discontinous folds of jagged grain flow. Electrical upsetting allows for continuous gathering of up to 30 diameters in ONE operation. This produces even and continuous grain flow in the final forging.

Why does this produce a better and stronger shackle?

The shackle will be stronger if there is less interuption to the grain flow of the raw material. It is always our goal to achieve the least amount of disruption to grain flow as possible, thus resulting in a strong, high integrity shackle. Electrical upset forging is the best process for achieving minimal grain flow disruption.

Our testing procedures

Each lifting shackle is individually tested before it leaves our factory. The test involves loading the lifting shackle to its proof load. The proof load is always twice the working load limit (safe working load). Each lifting shackle is then individually engraved with the test batch reference, the WLL of the lifting shackle, a reference to the type of material it is made from and the CE mark. The CE mark confirms that the lifting shackle has been manufactured in accordance with the EU Machine Directive 2006/42/EC. Once the lifting shackle tests are complete a certificate of test is produced detailing the relevant product and test information. All CE marked lifting shackles are also supplied with an instruction leaflet detailing how the lifting shackles should be used, stored and inspected. A declaration of conformity is also supplied with all CE marked lifting shackles.

Why does this produce a better and stronger shackle?

The shackle will be stronger if there is less interuption to the grain flow of the raw material. It is always our goal to achieve the least amount of disruption to grain flow as possible, thus resulting in a strong, high integrity shackle. Electrical upset forging is the best process for achieving minimal grain flow disruption.

Extra Services - Sequential marketing and tracing

Most organisations have quality plans in place which often require a system to trace raw materials back to their source. Due to our flexible manufacturing set up, we have the ability to sequentially mark shackles with customer specific information, thus providing a better method of tracing. We can also detail this information on the test certificate.

Contact UsFor any more information on our lifting products, please visit www.liftingshackles.com

Alternatively call us on +44 (0)191 414 0156 or email [email protected]

Petersen Stainless Rigging LimitedCowen Road, Blaydon on TyneTyne & Wear, NE21 5TW

t: +44 (0)191 4140156 f: +44 (0) 191 4990041 e:[email protected]

version 2011: 01

high quality stainless steel shackles

Documents

blocks tufnol stainless

safety pin

s steel wire ropes aisi

polyester lifting slings