high rate serieshigh rate series...mmoorree ppooww eerr ––lleessss ssppaaccee tm † subject to...
TRANSCRIPT
HIGH RATE SERIESHIGH RATE SERIESHIGH RATE SERIES
U1HR1500� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements (UL 94 V-0)
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat
separators extend life� Flame arresting, low pressure, self-sealing
valves are 100% factory tested� Computer-aided design, manufacturing control
processes, and standards to ensure quality products� All batteries meet or exceed IEEE
recommended practices� Battery design and construction meet
UL recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/119 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 5 years in float applications at 77°F (25°C)
Dimensions: 7.75" (197 mm) L x 5.21" (132 mm) W x 6.68" (170 mm) H
Weight: 27 Ibs. (12 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE TM
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.(VPC)
1.60 502 256 162 121 97.5 71.3 56.6 47.4 41.0
1.67 445 247 159 119 96.5 70.2 56.1 47.0 40.6
1.70 418 237 156 117 94.7 69.3 55.3 46.5 40.3
1.75 377 223 149 113 92.2 68.0 54.4 45.8 39.9
1.80 — 206 141 108 89.0 66.0 53.1 44.9 39.1
East Penn Manufacturing Co. Lyon Station, PA 19536-0147 Phone: 610-682-6361 Fax: 610-682-0891 Unigy Hotline: 610-682-3263
E.P.M. Form No. 2045 2/14 © 2014 by EPM Printed in U.S.A.All data subject to change without notice. No part of this document may be copied or
reproduced, electronically or mechanically, without written permission from the company.
e-mail: [email protected] www.eastpennunigy.com
HIGH RATE SERIESHIGH RATE SERIESHIGH RATE SERIES
45HR2000� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements (UL 94 V-0)
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat
separators extend life� Flame arresting, low pressure, self-sealing
valves are 100% factory tested� Computer-aided design, manufacturing control
processes, and standards to ensure quality products� All batteries meet or exceed IEEE
recommended practices� Battery design and construction meet
UL recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/168 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 10 years in float applications at 77°F (25°C)
Dimensions: 8.99" (228 mm) L x 5.47" (139 mm) W x 8.27" (210 mm) H
Weight: 40 Ibs. (18 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE TM
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.(VPC)
1.60 569 322 222 172 141 105 84.5 71.5 62.3
1.67 526 308 216 168 138 104 83.6 70.7 61.6
1.70 500 300 212 166 137 103 83.0 70.1 61.0
1.75 472 286 205 161 134 101 81.7 69.0 60.2
1.80 — 253 189 151 127 96.9 78.9 66.9 58.4
East Penn Manufacturing Co. Lyon Station, PA 19536-0147 Phone: 610-682-6361 Fax: 610-682-0891 Unigy Hotline: 610-682-3263
E.P.M. Form No. 2046 2/14 © 2014 by EPM Printed in U.S.A.All data subject to change without notice. No part of this document may be copied or
reproduced, electronically or mechanically, without written permission from the company.
e-mail: [email protected] www.eastpennunigy.com
HIGH RATE SERIESHIGH RATE SERIESHIGH RATE SERIES
HR3000� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat separators extend life
� Flame arresting, low pressure, self-sealing valves are 100% factory tested
� Computer-aided design, manufacturing control processes, and standards to ensure quality products
� All batteries meet or exceed IEEE recommended practices
� Battery design and construction meet UL recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/310 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 10 years in float applications at 77°F (25°C)
Dimensions: 10.20" (259 mm) L x 6.56" (166 mm) W x 8.24" (209 mm) H
Weight: 61 Ibs. (27.7 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE TM
RETU
RNLE
AD
RECYCLE
Pb
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.(VPC)
1.60 1080 610 413 316 259 190 151 124 107
1.67 972 576 400 310 254 188 149 123 106
1.70 924 559 393 305 250 185 148 122 105
1.75 830 519 373 293 243 182 145 120 104
1.80 — 466 343 277 235 176 140 116 101
Lyon Station, PA 19536-0147 • Phone: 610-682-6361 • Fax: 610-682-4781Order Department Hotline: 610-682-4231 www.eastpennunigy.com • e-mail: [email protected]. Form No. 2008 7/13 © 2013 by EPM Printed in U.S.A.
All data subject to change without notice.No part of this document may be copied or reproduced, electronically
or mechanically, without written permission from the company.
HIGH RATE SERIESHIGH RATE SERIESHIGH RATE SERIES
HR3500� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat separators extend life
� Flame arresting, low pressure, self-sealing valves are 100% factory tested
� Computer-aided design, manufacturing control processes, and standards to ensure quality products
� All batteries meet or exceed IEEE recommended practices
� Battery design and construction meet UL recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/370 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 10 years in float applications at 77°F (25°C)
Dimensions: 12.01" (305 mm) L x 6.56" (166 mm) W x 8.24" (209 mm) H
Weight: 71 Ibs. (32.2 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE TM
RETU
RNLE
AD
RECYCLE
Pb
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.(VPC)
1.60 1200 729 489 377 311 231 184 152 131
1.67 1063 686 475 370 305 227 181 150 130
1.70 1015 662 464 364 300 224 180 149 129
1.75 890 608 438 347 291 220 177 147 127
1.80 — 544 405 328 275 210 170 142 123
Lyon Station, PA 19536-0147 • Phone: 610-682-6361 • Fax: 610-682-4781Order Department Hotline: 610-682-4231 www.eastpennunigy.com • e-mail: [email protected]. Form No. 2009 7/13 © 2013 by EPM Printed in U.S.A.
All data subject to change without notice.No part of this document may be copied or reproduced, electronically
or mechanically, without written permission from the company.
HIGH RATE SERIESHIGH RATE SERIESHIGH RATE SERIES
HR4000� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat separators extend life
� Flame arresting, low pressure, self-sealing valves are 100% factory tested
� Computer-aided design, manufacturing control processes, and standards to ensure quality products
� All batteries meet or exceed IEEE recommended practices
� Battery design and construction meet UL recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/420 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 10 years in float applications at 77°F (25°C)
Dimensions: 12.93" (328 mm) L x 6.84" (173 mm) W x 8.70" (221 mm) H
Weight: 80 Ibs. (36.2 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE TM
RETU
RNLE
AD
RECYCLE
Pb
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.(VPC)
1.60 1405 832 554 428 350 257 204 168 145
1.67 1227 780 541 420 344 254 202 167 143
1.70 1125 750 532 417 342 252 201 166 143
1.75 1027 705 506 404 335 249 198 163 140
1.80 — 640 471 381 316 237 191 159 138
Lyon Station, PA 19536-0147 • Phone: 610-682-6361 • Fax: 610-682-4781Order Department Hotline: 610-682-4231 www.eastpennunigy.com • e-mail: [email protected]. Form No. 2010 7/13 © 2013 by EPM Printed in U.S.A.
All data subject to change without notice.No part of this document may be copied or reproduced, electronically
or mechanically, without written permission from the company.
HIGH RATE SERIESHIGH RATE SERIESHIGH RATE SERIES
31HR5000� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements (UL 94 V-0)
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat
separators extend life� Flame arresting, low pressure, self-sealing
valves are 100% factory tested� Computer-aided design, manufacturing control
processes, and standards to ensure quality products� All batteries meet or exceed IEEE
recommended practices� Battery design and construction meet
UL recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/475 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 10 years in float applications at 77°F (25°C)
Dimensions: 13.46" (342 mm) L x 6.77" (172 mm) W x 11.21" (285 mm) H
Weight: 98 Ibs. (45 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE TM
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.(VPC)
1.60 1081 830 620 492 406 305 246 206 178
1.67 983 760 588 475 397 301 244 204 177
1.70 946 727 569 464 391 298 241 203 176
1.75 836 663 530 440 375 290 236 199 173
1.80 — 587 481 406 350 276 227 192 168
East Penn Manufacturing Co. Lyon Station, PA 19536-0147 Phone: 610-682-6361 Fax: 610-682-0891 Unigy Hotline: 610-682-3263
E.P.M. Form No. 2047 2/14 © 2014 by EPM Printed in U.S.A.All data subject to change without notice. No part of this document may be copied or
reproduced, electronically or mechanically, without written permission from the company.
e-mail: [email protected] www.eastpennunigy.com
HR5500� Exclusive IPF ® Technology optimizes
power capacity, cell consistency, and long-term reliability
� Advanced AGM technology for superior high rate, short term power
� Reinforced case resists bulging and meets safety requirements
� Case & cover heat sealed and 100% tested to prevent leaks
� Epoxy-sealed posts eliminate leaks� Puncture resistant micro-porous glass mat
separators extend life� Flame arresting, low pressure, self-sealing
valves are 100% factory tested� Computer-aided design, manufacturing control
processes, and standards to ensure quality products� All batteries meet or exceed IEEE
recommended practices� Battery design and construction meet UL
recognition requirements
SPECIFICATIONSNominal Voltage: 12-Volt/550 w.p.c.
@ 15 min. rate to 1.67 v.p.c.Positive Plate: Pure lead, low-calcium,
high-tin alloyNegative Plate: Lead calcium alloy
Post Seal: Epoxy-sealedTerminal: Top access,
1/4" - 20 threaded insertContainer: Flame-retardant, polypropylene -
UL 94 V-0/>28% L.O.I.
Safety Vent: Low positive pressure, self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44 to 13.56 volts per 6-cell battery)
Design Life: 10 years in float applications at 77°F (25°C)
Dimensions: 13.46" (342 mm) L x 6.77" (172 mm) W x 11.21" (285 mm) H
Weight: 107 Ibs. (48.5 kg)
MORE POWER – LESS SPACEMORE POWER – LESS SPACE®
† Subject to change without notice.
DISCHARGE RATE IN WATTS PER CELL RATINGS @ 77°F (25°C) †
Volts Per Cell 1 MIN. 5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 60 MINS.(VPC)
1.60 1366 992 737 572 471 350 279 200
1.67 1244 914 694 550 459 345 277 199
1.70 — 849 660 536 450 341 274 198
1.75 — 782 622 504 429 330 268 196
1.80 — 701 559 467 400 312 256 188
East Penn Manufacturing Co. Lyon Station, PA 19536-0147 Phone: 610-682-4231 Fax: 610-682-4781 e-mail: [email protected]
E.P.M. Form No. 1837 Rev. 10/13 © 2013 by EPM Printed in U.S.A.All data subject to change without notice. No part of this document may be copied or
reproduced, electronically or mechanically, without written permission from the company.
www.eastpennunigy.com