Series 804 High-Speed

www.glenair.com E-Mail: sales@glenair.comGLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912

Q-2

© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.

Dimensions in Inches (millimeters) are subject to change without notice.

Q

INTEGRAL BAND PLATFORM

SERIES 804 PLUG

CLOSED ENTRY SOCKET

CONTACT

STAINLESS STEEL

RETENTION SPRING

SERIES 804 RECEPTACLE

O-RING

Push-to-Mate, Pull-to-Unmate

Special Purpose PFA (Fluoropolymer) Insulators

Gold-Plated Stainless Steel Spring

Crimp Rear Release Contacts

Integral Band Platform

Supplied with Size #23 Gold-Plated Copper Alloy Crimp, PCB or Solder Cub Contacts

Environmentally Sealed

Series 804 Mighty Mouse High-SpeedPush-Pull Quick-Disconnect Connectors

General Information

Series 804 High-Speed Mighty Mouse Plug and Receptacle ConnectorsSeries 804 quick-disconnect offers environmental sealing and rugged design in a lightweight, push-pull package. Ideal for breakaway connections, the Series 804 QDC High-Speed connector features a stainless steel spring in the receptacle and a detent on the plug body. Used for headsets, radios, weapons and other applications, the QDC Mighty Mouse meets immersion requirements and provides excellent durability. The gold-plated spring provides low shell-to-shell resistance for excellent EMI shielding. A fluorosilicone o-ring provides a watertight seal when mated. PCB mount versions also available.

High-Speed PerformanceSeries 804 High-Speed Mighty Mouse connectors are constructed with a rear grommet for environmental sealing. This grommet can be removed in order to maintain the construction of the matched impedance pair cable for a longer distance inside the connector for improved high-speed performance (see tables below.) However, removal of the grommet affects environmental sealing. For optimal high-speed performance and environmental sealing, Glenair recommends our factory-terminated overmolded cordsets. Full ordering information begins on page Q-12.

Factory-terminated overmolded cordsets for optimal high-speed performance and environmental sealing: See page Q-12

Rev. 05.14.19

Serie

s 804

High-Sp

eed

www.glenair.com E-Mail: sales@glenair.comGLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912

Q-3

© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.

Dimensions in Inches (millimeters) are subject to change without notice.

Q

Series 804 Unmate Force

LayoutAverage Force

Pounds Newtons6-4 10.8 48.06-7 11.4 50.77-10 12.0 53.49-19 13.8 61.4

10-26 15.2 67.6

SpecificationsCurrent Rating 5 AMPSDielectric Withstanding Voltage 750 VACInsulation Resistance 5000 megohms minimumOperating Temperature -65° C. to +175° C.Shock 300 g.Vibration 37 g.Shielding Effectiveness(1) 60 dB minimum from 100MHz to 1000MHz.Durability 2000 mating cycles(1)Tested with electroless nickel plating.

Materials and FinishesShells, Jam Nuts Aluminum alloy or stainless steelContacts Copper alloy, 50 µInch gold platedInsulators PFAContact Retention Clip Beryllium copper alloyInterfacial Seal, O-rings, Wire Sealing Grommet

Fluorosilicone rubber

Spring Gold plated stainless steel

Series 804 Mighty Mouse High-SpeedPush-Pull Quick-Disconnect Connectors

General Information

Quick-Disconnect Mating Series 804 push-pull mating utilizes a stainless steel retention spring in the receptacle and a detent on the plug.

Two Shell Styles: Integral platform for direct shield attachment using Band-Master™ ATS advanced termination system, or accessory thread for attaching a strain relief.

Crimp, Rear Release contact system, with #23 contacts.

Printed Circuit Board and Solder Cup versions with precision machined low profile shells.

Harsh Environment: Fluorosilicone seals, aluminum or stainless steel shells, and gold-plated copper alloy contacts for superior performance in demanding applications.

High-Speed: Special purpose PFA (Fluoropolymer) insulators deliver superior impedance, VSWR and insertion loss values.

Mighty Mouse High-Speed Contact Arrangements Mating Face View of Pin Connector (Socket Connector Numbers are Reversed)

6 - 4

21

34

6 - 7

217 3

456

7 - 10

213

89

1047

Shell Size 6 4 Size #23 Contacts

Shell Size 6 7 Size #23 Contacts

Shell Size 7 10 Size #23 Contacts

17

12

1619 17

13

8

43

9 - 1910 - 26

5

262123

911

1

1624

2518

15 12

426 3

1014

22

1713

78

1920

Shell Size 9 19 Size #23 Contacts

Shell Size 10 26 Size #23 Contacts

Rev. 02.06.18