hirise specimen test certificate
DESCRIPTION
HiRise Specimen Test CertificateTRANSCRIPT
Dirk India Private Limited
Ambuja HiRise
Test
No.
Test Unit Typical Test
Results
Chemical Requirements
1 Loss on Ignition, max % 5 0.76
2 Magneisa, max % 6 2.52
3 Sulphuric Anhydride, max % 3 1.68
% X + 4.0 (100 - X)
100
X = declared % of
fly ash
5 Chloride, max % 0.1 0.01
Physical Requirements
1 Fineness , min m2/kg 300 366.20
2 Normal Consistency % 31.20
3 Setting Time
a. Initial, min minutes 30 115
b. Final, max 600 225
4 Soundness
a. Le- Chatelier Expansion, max mm 10 1.00
b. Autoclave Expansion, max % 0.8 0.03
5 Compressive strength % 0.73
a. 72 +/- 1 hr Mpa 16 33.90
b. 168 +/- 2hr MPa 22 46.10
c. 672 +/- 4hr MPa 33 62.80
6 Drying shrinkage, max % 0.15 0.08
A.R.Yadav Q.C.Department
Regd Office:10,India House,Geetanjali Colony,Indira Nagar,Nashik-422009
Phone:(0253) 2322816, 2326679 Fax:(0253) 2326678
32.9Insoluble material, max4
Ambuja HiRise Cement
Specimen Test Certificate
Factory:Gut No 348, Behind NTPS, Eklahare, Nashik-422105
www.ambujahirise.in
IS 1489 (Part1):
1991
requirements