hitachi sm0560e lcd projector
DESCRIPTION
Manual de servicioTRANSCRIPT
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Multimedia LCD Projector
November 2005 Digital Media Division
SM0560
CP-S245(CC9SMN)
CP-X255(CC9XMN)SERVICE MANUAL
Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be
sure to read cautionary items described in the manual to maintain safety before servicing.
Caution
1. When replace the lamp, to avoid burns to your fi ngers. The lamp becomes too hot.
2. Never touch the lamp bulb with a fi nger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
power unit (circuit) and power unit (ballast), after turn on the projector.
4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged. If replacing to the LCD LENS/PRISM assembly,
do not hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or specifi ed.
Service Warning
WarningThe technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Ltd.
1. Features -----------------------------------------------2
2. Specifi cations -----------------------------------------2
3. Names of each part ---------------------------------3
4. Adjustment --------------------------------------------6
5. Troubleshooting ------------------------------------ 12
6. Service points -------------------------------------- 18
7. Wiring diagram ------------------------------------- 33
8. Disassembly diagram ----------------------------- 41
9. Replacement parts list ---------------------------- 48
10.RS-232C commands ----------------------------- 50
11. Block diagram -------------------------------------- 59
12. Connector connection diagram ---------------- 60
13.Basic circuit diagram ------------------------------ 61
Contents
ED-X8255(CC9XMN)PJ656(CC9XM)
2
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
1. Features• High Brightness
• Low Noise
• Rich Connectivity
• Compact Body
2. Specifications
CP-S245 CP-X255 / ED-X8255
Liquid crystal
panel
Drive system TFT active matrix
Panel size 1.5cm(0.6 type)
Number of pixels 800 (H) x 600 (V) 1024 (H) x 768 (V)
Lamp 180W UHB
RGB
signal
RGB IN1 Video : Analog 0.7Vp-p(75Ω termination)
H/V. sync. : TTL level (positive/negative)
Composite sync. : TTL level2*
RGB OUT*
Video:Analog 0.7Vp-p, 75Ω output impedance (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
VIDEO
signal
VIDEO IN 1.0Vp-p (75Ω termination)
S-VIDEO IN
Y signal: 1.0±0.1Vp-p, (75Ω termination)
C signal: 0.286±0.1Vp-p (NTSC burst signal, 75Ω termination)
0.3±0.1Vp-p (PAL/SECAM burst signal, 75Ω termination)
COMPONENT
VIDEO
Y 1.0±0.1Vp-p, 75Ω termination (positive)
CB/PB 0.7±0.1Vp-p, 75Ω termination (positive)
CR/PR 0.7±0.1Vp-p, 75Ω termination (positive)
AUDIO
signal
AUDIO IN 1 200mVrms, 47kΩ or more (max. 3.0Vp-p)
AUDIO IN 2 L/R 200mVrms, 47kΩ or more (max. 3.0Vp-p)
AUDIO OUT 0~200mVrms, output impedance 1kΩ (max. 5.0Vp-p)
Speaker output 1W x 1
Power supply AC100~120V/3.1A, AC220~240V/1.7A
Power consumption 290W
Dimensions 306 (W) x 86 (H) x 249 (D) mm (Not including protruding parts)
Weight 3.0kg
Temperature rangeOperation : 5~35°C
Storage : -20~60°C
Accessories
Remote control x1
RGB cable x 1
Audio/Video cable x 1
Power cords x 3
Batteries x 2
User’s manuals x 1
Soft case x 1 (not ED-X8255)
*) This port is used as both RGB IN 2 and RGB OUT. Its function is selected with RGB IN/OUT switch.
2a
PJ656(CC9XM)
1. Features• High Brightness
• Low Noise
• Rich Connectivity
• Compact Body
2. Specifications
Liquid crystal
panel
Drive system TFT active matrix
Panel size 1.5cm(0.6 type)
Number of pixels 1024 (H) x 768 (V)
Lamp 180W UHB
RGB
signal
RGB IN1 Video : Analog 0.7Vp-p(75Ω termination)
H/V. sync. : TTL level (positive/negative)
Composite sync. : TTL level2*
RGB OUT*
Video:Analog 0.7Vp-p, 75Ω output impedance (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
VIDEO
signal
VIDEO IN 1.0Vp-p (75Ω termination)
S-VIDEO IN
Y signal: 1.0±0.1Vp-p, (75Ω termination)
C signal: 0.286±0.1Vp-p (NTSC burst signal, 75Ω termination)
0.3±0.1Vp-p (PAL/SECAM burst signal, 75Ω termination)
COMPONENT
VIDEO
Y 1.0±0.1Vp-p, 75Ω termination (positive)
CB/PB 0.7±0.1Vp-p, 75Ω termination (positive)
CR/PR 0.7±0.1Vp-p, 75Ω termination (positive)
AUDIO
signal
AUDIO IN 1 200mVrms, 47kΩ or more (max. 3.0Vp-p)
AUDIO IN 2 L/R 200mVrms, 47kΩ or more (max. 3.0Vp-p)
AUDIO OUT 0~200mVrms, output impedance 1kΩ (max. 5.0Vp-p)
Speaker output 1W x 1
Power supply AC100~120V/3.1A, AC220~240V/1.7A
Power consumption 290W
Dimensions 306 (W) x 83 (H) x 249 (D) mm (Not including protruding parts)
Weight 2.8kg
Temperature rangeOperation : 5~35°C
Storage : -20~60°C
Accessories
Remote control x1
RGB cable x 1
Audio/Video cable x 1
Power cords x 3
Batteries x 2
User’s manuals x 1
Soft case x 1
*) This port is used as both RGB IN 2 and RGB OUT. Its function is selected with RGB IN/OUT switch.
3
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
3. Names of each partProjector
WARNINGDuring use or immediately after use, do not touch around the lamp and vents of the pro-jector. ( ) It could cause a burn.
Lens
Filter cover (Air filter and intake vent are inside.)
Elevator button
Elevator foot
Remote sensor
Zoom ring
Focus ring
Vent
Lamp cover (Lamp unit is inside.)
Bottom side
Speaker
Lens cover
Security bar (Use for attaching a commercial anti-theft chain or wire.)
Control buttons
Front-Right side
4
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
Y R
L
AUDIO IN2
AUDIO OUT
CONTROL RGB IN1RGB IN2 USB
RGB OUT
AUDIO IN1
LANLINK
ACT
VIDEO
S-VIDEO
CB/PB
CR/PR
K
AC inlet
Power switch
Elevator button
COMPONENT VIDEO ports
YCB/PB
CR/PR
S-VIDEO port
VIDEO port
CONTROL port
Elevator foot
Rear-Left side
Ports (See below.)
Vent
AUDIO-OUT port
Ports
AUDIO IN1 port (In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports, however, it is possible to change the settings.)
AUDIO IN2 L/R port (In the default setting, the AUDIO IN2 L/R port is the audio port for the VIDEO, S-VIDEO and COMPONENT VIDEO ports, however it is possible to change the settings.)
RGB IN1 port
RGB IN2 /RGB OUT port (Use the RGB IN OUT switch to select RGB IN2 or RGB OUT for this port.)RGB IN2 port: Inputs the RGB signal from a PC.RGB OUT port: When connected to a monitor, outputs the signal input via RGB IN1.
NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.
Restart switch (*)
RGB IN OUT switch Use this button to select either RGB IN2 or RGB OUT for the corresponding port. When this switch is not pushed in, RGB IN2 is selected. When this switch is pushed in, RGB OUT is selected.
USB port
LAN Port Used for Ethernet input/output.This port is used when utilizing network functions.
4a
PJ656(CC9XM)
Y R
L
AUDIO IN2
AUDIO OUT
CONTROL RGB IN1RGB IN2 USB
RGB OUT
AUDIO IN1
VIDEO
S-VIDEO
CB/PB
CR/PR
K
AC inlet
Power switch
Elevator button
COMPONENT VIDEO ports
YCB/PB
CR/PR
S-VIDEO port
VIDEO port
CONTROL port
Elevator foot
Rear-Left side
Ports (See below.)
Vent
AUDIO-OUT port
Ports
AUDIO IN1 port(In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports, however, it is possible to change the settings.)
AUDIO IN2 L/R port(In the default setting, the AUDIO IN2 L/R port is the audio port for the VIDEO, S-VIDEO and COMPONENT VIDEO ports, however it is possible to change the settings.)
RGB IN1 port
RGB IN2 /RGB OUT port(Use the RGB IN OUT switch to select RGB IN2 or RGB OUT for this port.)RGB IN2 port: Inputs the RGB signal from a PC.RGB OUT port: When connected to a monitor, outputs the signal input via RGB IN1.
NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.
Restart switch (*)
RGB IN OUT switchUse this button to select either RGB IN2 or RGB OUT for the corresponding port. When this switch is not pushed in, RGB IN2 is selected. When this switch is pushed in, RGB OUT is selected.
USB port
5
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
SEARCH button
RGB button
VIDEO button
ASPECT button
HOME button
MAGNIFY
ON button
OFF button
END button
FREEZE button
POSITION button
ESC button
Remote control
Battery cover
(on the back)
STANDBY/ON button
AUTO button
BLANK button
PAGE UP button
VOLUME button
MUTE button
PAGE DOWN button
KEYSTONE button
MENU button
Cursor buttons
,,,
ENTER button
RESET button
HOME PAGE UP
PAGE DOWNEND
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
Control buttonsLAMP indicator
TEMP indicator
POWER indicatorCursor buttons
,,,
STANDBY/ON button
INPUT button
6
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
4. Adjustment4-1 Before adjusting
4-1-1 Selection of adjustment
When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart.
Table 4-1: Relation between the replaced part and adjustment
Replaced part
Adjustment
Convergence(Chap.4-2)
Ghost(Chap.4-3)
Flicker(Chap.4-4)
White balance
(Chap.4-5)
Coloruniformity(Chap.4-6)
Dichroicoptics unit
LCD/LENSprism
assembly
PWB assembly
Main
Lampunit
assembly
: means need for adjustment. : means not need for djustment. : means recommended.
4-1-2 Setting of condition before adjustment
1. Before starting adjustment, warm up projector
for about 10 minutes.
2. Set Zoom Wide to Max. And project an image
with more than 1m (40 inches) in diagonal size.
3. Normalizing the video adjustment
Press the [MENU] button to display the Easy
menu. If Advance menu comes up, move to the
Easy menu.
Select RESET in the Easy menu and press [ ]
or [ENTER] button to open the RESET menu
window. Choose EXECUTE with [ ] button.
Note that no signal input may not allow to reset
the adjustments.
4. Select PICTURE > GAMMA in the Advance
menu to set to DEFAULT1.
Note that PICTURE menu is not selectable with
no signal input displayed.
5. Select PICTURE > COLOR TEMP > CUSTOM
in the Advance menu, then press [ ] or [ENTER]
button to display the equalizing window. Set all
the values of OFFSET and GAIN in the window
to zero.
Caution: Before this performance, make a note
of your customer’s adjustments, because the
data is overwritten.
6. Perform all adjustments from the FACTORY
MENU.
Perform the following operations to display the
FACTORY MENU.
< When you use the remote control… >
a. Press the [MENU] button of remote control to
display the Easy menu. (If the Advance menu
appears, move to the Easy menu from EASY
MENU.)
b. Select the [RESET] in the Easy menu, and
then press the [ ] or [ENTER] button.
c. Next, press the [RESET] button one time.
And hold the [RESET] button for 3 seconds
or more (the FACTORY MENU will appear).
< When you use the keypad… >
a. Press the [ ]/[ ]/[ ]/[ ] button of the projec-
tor to display the Easy menu. (If the Advance
menu appears, move to the Easy menu from
EASY MENU.)
b. Select the [RESET] in the Easy menu, and
then press the [ ] button.
c. Next, press the [ ] button one time. And
repress and hold the [ ] button together
with the [INPUT] button for 3 seconds or
more (the FACTORY MENU will appear).
7
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
4-3 Ghost adjustment
Signals for internal adjustment
30%
112/255
30%
0/255
Adjustment procedure
1. Make this adjustment after completing the
adjustment in 4-2.
2. Choose Advance menu > OPTION > SERVICE
> GHOST > R,G and B, and set them to zero.
3. Open the FACTORY MENU and choose DAC-P
> GHOST > R,G and B to display each color of
test patterns for adjustments.
Confirm if there is ghosting on the both sides of
black pattern. If visible, perform this adjustment
as following procedure.
4. Use DAC-P - GHOST - R: in the FACTORY MENU
to adjust so that R color ghost is at a minimum.
(Set the adjustment value to default, and then
raise the value. When a ghost appears to the left
of a vertical line, reduce the value by 3 steps.
Then, if a ghost image is visible on the right of
an original image, raise the number by 1 step.)
5. In the same way, use DAC-P - GHOST-G: in
the FACTORY MENU to adjust so that G color
ghost is at a minimum.
6. In the same way, use DAC-P - GHOST-B: in
the FACTORY MENU to adjust so that B color
ghost is at a minimum.
4-2 Convergence adjustment
Signal pattern for internal adjustment
Adjustment procedure
Perform this adjustments only when the conver-
gence is not good.
1. Open FACTORY MENU and then select
OPTION > CNV-V. Use R and/or B so that
three colors of images can be converged at
center, top and bottom of the screen.
2. In the same way, select OPTION > CNV-H and
use R and/or B so that three colors of images
can be converged at center, left and right of the
screen.
8
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
4-4 Flicker adjustment (V.COM adjustment)
Signals for internal adjustment Adjustment procedure
1. Make this adjustment after completing the
adjustment in 4-3 Ghost adjustment.
2. Use DAC-P - V.COM - R: in the FACTORY
MENU to adjust so that the flicker at the center of
the screen is less than the flicker at the periphery.
(When the flicker is about the same across the
whole screen, adjust so that the flicker at the center
of the screen is somewhat less than elsewhere.)
3. In the same way, use DAC-P - V.COM-G: in the
FACTORY MENU to adjust the G color flicker.
4. In the same way, use DAC-P - V.COM-B: in the
FACTORY MENU to adjust the B color flicker.
4-5 White balance adjustment (visual inspection)
Preparations
1. Perform these adjustments after the Flicker
adjustment described in Section 4-4.
2. Reset gamma correction before adjustment.
Place the cursor on [GAMMA] in the FACTORY
MENU, press the [RESET] key and select RESET.
Adjustment procedure
1. First, adjust the G color.
2. Select GAMMA, SUB-CNT, and G: in the FACTORY
MENU. If the background is white solid, press the
[ENTER] key on the remote control to change to [G]
monochrome in the 33-tone grayscale.
3. Adjust GAMMA, SUB-CNT, and G: in the FAC-
TORY MENU so that brightness of 33 steps is
best.
4. Don’t adjust GAMMA, SUB-BRT, and G: in the
FACTORY MENU because we want to keep the
best contrast ratio.
5. Then adjust colors R and B.
6. Select GAMMA, SUB-CNT, and G: in the FACTORY
MENU. If the background is white solid, press the
[ENTER] key on the remote control to change to [W]
monochrome in the 33-tone grayscale.
7. Adjust GAMMA, SUB-BRT, R: and B: in the
FACTORY MENU so that low-brightness white
balance is best.
8. Adjust GAMMA, SUB-CNT, R: and B: in the
FACTORY MENU so that middle-brightness
white balance is best.
9. Repeat steps 7 to 8 above, and adjust so that
brightness white balance of 33 steps is best.
9
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
VID-AD
MIN
MID-L
MID-H
MAX
DAC-P
GAMMA
C. UNIF.
No. 1 R 0
STRIPE
OPTION
C.UNIF
ON/OFF ON
OFF
G 0 B 0
Major adjustment lattice point No.
4-6 Color uniformity adjustment
Preparations
1. Perform these adjustments after the white balance
adjustment described in Section 4-5.
2. Make a color uniformity adjustment for the follow-
ing four tones.
MIN tone (approx. 7% input signal)
MID-L tone (approx. 14% input signal)
MID-H tone (approx. 46% input signal)
MAX tone (approx. 70% input signal)
3. Place the cursor on [C.UNIF.] in the FACTORY
MENU and press the [ ] key. This displays the
Adjust Tone menu at the bottom of the screen.
To choose the tone to be adjusted, press the [ ]
key and then use the [ ] or [ ] key.
Select the major adjustment lattice point No.
and color, and then adjust them.
4. The major adjustment lattice point numbers (a
total of 17 points) corresponds to the major
adjustment lattice point positions in the diagram
on the right. The color uniformity of the entire
screen can be adjusted by adjusting the white
balance for each of the points starting in order
from the low numbers.
5. Adjustment point No.1 should not be adjusted,
because it controls the brightness of the entire
screen.
6. To temporarily turn correction off, place the
cursor on [C.UNIF.] in the Adjust Tone menu and
press the [ ] key. The ON/OFF menu appears.
Place the cursor on [ON] with the [ ] key and
press the [ ] key. To turn it on again, place the
cursor on [OFF] and press the [ ] key.
7. Although this adjustment can also be made
using internal signals, we will here use the
[ENTER] key on the remote control to select the
following two signals.
Solid monochrome adjustment color (use G
color adjustment when a color differential
meter is used).
Solid white (use for adjustment other than
above).
8. Reset color-shading correction before adjust-
ment.
When 4 tones and all colors are to be reset,
place the cursor on [C.UNIF.] in the FACTORY
MENU, press the [RESET] key and select
RESET.
When only 1 tone is to be reset, place the
cursor on the tone to be reset, press the
[RESET] key and select RESET.
Single tone and monochrome resets cannot
be performed.
FACTORY MENUMajor adjustment lattice point position
14 12
13
16
15 17
6 4 8
2 1 3
7 5 9
10 11
V/6
H/6 H/3 H/3 H/6V/3
V/3
V/6
Adjust tone menu
10
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Adjustment procedure 1
(When a color differential meter is used)
1. First adjust [MID-L] tone [G:].
2. Select adjustment point [No.2][G:].
When the background is not [G] monochrome,
press the [ENTER] key on the remote control to
change to solid [G] monochrome.
3. Measure the illumination at adjustment points
No. 2, No.3, No.10 and No.11.
The values should be:
No.2 = Y2 [lx] No.10 = Y10 [lx]
No.3 = Y3 [lx] No.11 = Y11 [lx]
4. No.2 and No.3 adjustment point have the aver-
age of Y2 and Y3.
Y2 = ( Y2 + Y3 ) / 2 ± 2 [%]
Y3 = ( Y2 + Y3 ) / 2 ± 2 [%]
5. No.10 and No.11 adjustment point have the
average of Y10 and Y11.
Y10 = ( Y10 + Y11 ) / 2 ± 2 [%]
Y11 = ( Y10 + Y11 ) / 2 ± 2 [%]
6. Then adjust [MID-L] tone [R] and [B].
When the background is [G] monochrome,
press the [ENTER] key on the remote control to
change to solid white.
7. Measure the color coordinates of adjustment
point [No.1] and make a note of them.
Assume that they are x = x1, y = y1.
Note: When the CL-100 color and color differ-
ence meter is used, the [∆](delta) mode
is convenient. When adjustment point
[No.1 ] co lo r coord ina te has been
selected, set the slide switch on the side
to [∆ ](delta) while holding down the [F]
button on the front panel. The measure-
ment shown after this displays the devia-
tion from measurement point 1.
8. Measure the color coordinates of measurement
point [No.2] and adjust [No.2][R:] and [B:] so
that the coordinates are as follows.
x = x1 ± 0.005 , y = y1 ± 0.010
9. Similarly, measure adjustment points [No.3] to
[No.17] and adjust their color coordinates start-
ing in order from the small number points.
This completes adjustments required for [MIN].
Note: Since excessive correction may lead to a
correction data overview during internal
calculations, use the following values for
reference.
[No.2] to [No.5] ± 40 or less
[No.6] to [No.9] ± 50 or less
[No.10] to [No.13] ± 70 or less
[No.14] to [No.17] ± 120 or less
10. Then adjust [MIN] tone [G] so that the adjust-
ment data set two times as much as [MID-L]
tone [G].
This completes [G] color adjustments.
11. Then adjust [MIN] tone [R] and [B].
Select [No.2] [B:] and press the [ENTER] key
on the Remote control transmitter to change to
solid white.
12. Measure the color coordinates of adjustment
point [No.1] and make a note of them.
Assume that they are x = x1, y = y1.
13. Now measure the color coordinates of mea-
surement point [No.2] and adjust [No.2][R:] and
[B:] so that the coordinates are as follows.
x = x1 ± 0.005 , y = y1 ± 0.010 (Target)
x = x1 ± 0.020 , y = y1 ± 0.040
14. Similarly, measure adjustment points [No.3] to
[No.17] and adjust their color coordinates start-
ing in order from the small number points.
This completes [MIN] tone adjustments.
15. Now make similar adjustments for [MID-H] tone.
(Adjust [MID-H] tone [G] so that the adjustment
data set half as many as [MID-L] tone [G].)
16. Now make similar adjustments for [MAX] tone.
(Adjust [MAX] tone [G] so that the adjustment
data set half as many as [MID-L] tone [G].)
11
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Adjustment procedure 2
(visual inspection)
1. First adjust [MIN] tone [G:].
2. Select [No.2] [G:].
If the background is [G] monochrome, press the
[ENTER] key on the remote control to change
to solid white.
3. View measurement point [No.2] and [No.3].
Lower the [G] color intensity only of the color
point whose [G] color is more intense than
measurement point [No.1].
4. View measurement point [No.10] and [No.11].
Lower the [G] color intensity only of the color
point whose [G] color is more intense than
measurement point [No.1], and raise the inten-
sity of the point whose color intensity is lower
than measurement point [No.1].
5. Now adjust the [MIN] tone for colors [R] and [B].
6. View measurement points [No.2], [No.3],
[No.10] and [No.11]. Adjust the [R] and [B] of
each measurement point so that they have the
same color as measurement point [No.1].
Adjustment technique:
First, adjust [B:] of the point whose color is to
be adjusted so that it approximates that of
[No.1]. If [R:] is low at this time, the image will
have cyan cast, in which case [R:] is increased.
On the other hand, if [R:] is excessive, the
image will have a magenta cast, in which case
[R:] is decreased.
Overall, a cyan cast makes it easy to see color
shading.
7. Next, view measurement points [No.4], [No.5],
[No.12], [No.13] and make similar adjustments.
8. Then adjust measurement points [No.6], [No.7],
[No.8], [No.9], [No.14], [No.15], [No.16] and [No.17].
This completes the [MIN] tone adjustments.
9. Make similar another three tones as described
in steps 1 to 8 above.
8
3
16
17
9
11
6
14
2
12
15 13
10
7
4
1
5
8
3
16
17
9
11
14 12
15 13
10
4
1
5
6
2
7
8
3
16
17
9
11
6
2
12
13
14
15
10
7
4
1
5
14 12
15 13
10
4
1
5
6
2
7
8
3
16
17
9
11
17
9
15 13
7 5
3
17
9
11
15 13
10 1
5
6
2
7
8
16
17
9
6
12
13
7
4
5
14 12
10
4
1
6
2
8
3
16
17
9
113 11210 1
1614 12
86 4 84
1614 12
3 112
14
15
10 1
57
15 13
17
9
15 13
7 5
3
17
9
11
6
17
9
6
13
7 5
14 12
10
46
2
8
16
3 11210 1
1614 12
86 4 84
1614 12
3 112
14
15
10
57
15
10 12
1315
57
12
4
1
8
1713
1 3 11
16
95
17
9
15 13
7 5
3
17
9
11
6
17
9
6
13
7 5
14 12
10
46
2
8
16
3 112 1
1614 12
84 84
1614 12
32
14
15
10
57
15
10 12
13
57
12
4
1
1713
1 3
5
11
9
11
8
16
15
10
6
No. 2 deviation range No. 10 deviation range No. 3 deviation range No. 11 deviation range
No. 4 deviation range No. 12 deviation range No. 5 deviation range No. 13 deviation range
No. 6 deviation range No. 7 deviation range No. 8 deviation range No. 9 deviation range
No. 14 deviation range No. 15 deviation range No. 16 deviation range No. 17 deviation range
12
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
5. Troubleshooting Check points
E801
IS01
IS42IS12
IS13
IS14
IS41IS11
IS10
IS40E800
E301
E802
E807
E805 E302 E806 EE01EASP
E304
P501
P601
P701
PWB assembly MAIN
D301(POWER)
D303(LAMP)
D302(TEMP)
THERMAL SWITCH (TSW)
PWB assembly REMOTE Speaker cable
EK
01
E2
E1
E3
S801
13
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Power can not be turned on
Are
voltage
supplied at pins (6)
and (8) of E800 on the PWB
assembly MAIN in
standby mode?
Are
voltage supplied
at pins (1) and (3) of E800
on the PWB assembly MAIN
in standby mode?
PWB assembly MAIN
NO
YES
(6): +6.6V
(8): +4.1V
(10): GND
Does LAMP
(D303) or TEMP (D302)
indicator light or
blink?
YES
(1): +14V
(2): GND(for +14V)
(3): +16V
(4): GND(for +16V)
NO
*: Be sure to unplug the power cord before measuring resistance.
Measure
resistance* between pins
(6) and (10), and between
pins (8) and (10) of
E800.
Are all
of the pictures
from video, s-video and
component video ports dis-
played correctly?
Open
0ΩPWB assembly MAIN
Power unit (circuit)
Termal switch (TSW)Open
Power unit (circuit) Fuse on the power unit
(circuit)
NO
Mea-
sure resistance*
between pins (1) and (2),
and between pins (3) and (4)
of E800.
0ΩPWB assembly MAIN
Power unit (circuit)
Power unit (circuit)
Short
Open
Go to the next pageYES
14
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Lamp does not light
What
is the state of
LAMP indicator D303
during operation?
Measure
resistance* between
pins (1) and (2) of S801
when the lamp door
is secure.
Lamp door
Re-attach lamp
door
Re-attach PWB
assembly MAINPWB assembly MAIN
Blinks
Open
0Ω
Is the
LAMP installation
correct?
Light
install the Lamp
PWB assembly
MAIN
Is
the voltage
at the (1) of
E804 on the PWB
assembly MAIN fixed
to "L" during
warming-
up?
NG
YES
“L” = 0V
Change the
lamp. Does lamp
light?
LampLight
YES
Not light
Power unit (ballast) Power unit (circuit)
No
What
is the state of
TEMP indicator
D302?
Thermistor
(E1/E2/E3)Is the
voltage at the (3) of
E804 on the PWB assembly
MAIN set to "L" during
warming-up?
Not light
and blink
PWB assembly MAIN
YES
“L” = 0V
Power unit (ballast)
No
PWB assembly
MAIN
Are
the voltage
supplied to the pin
(2) of connectors** for
DC fans soon after
the button is
pressed?
Is
the voltage
supplied to the pin
(4) of E801 soon after
the button is
pressed?
Observe
the voltage
waveforms at pin (1) of
connectors for DC fans**
soon after the button
is pressed.
Blinks
E1/E2: 5 to 20kΩ
E3: 0.5 to 2kΩ
NG(open/short)
DC fan
(failed in above check)
Correct waveform is drawn below.
f ≥ 40Hz
PWB assembly
MAIN
NO (0V)
PWB assembly
MAIN
NO (0V)
PWB assembly
MAIN
Correct
Measure
resistance of
E1, E2 and E3 after
disconnecting them
from MAIN
board.
YES
YES
incorrect
Lights
*: Be sure to unplug the power cord
before measuring resistance.
Not light
and blink
**: DC fan connectors are E801,
E802, E806, and E807.
(1V or higher)
(5V or higher)
OK
15
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Picture is not displayed.
Are
the splash screen
and the user menu displayed
correctly?
YES
Are all
of the pictures
from video, s-video and
component video ports
displayed correctly?
YES
Is the
picture from RGB
out port displayed correctly
on another monitor
display?
YES
Is the
message of ”
No input is detected on
**” or “Sync is out of range on
**” displayed on the
screen?
Confirm
the LCD Panels
connection to the MAIN
board.
No
CPC30 connector A/B
PWB assembly MAIN LCD/Lens prism assembly
OK
PWB assembly MAIN
No
PWB assembly MAIN
No
SN74LVC1G126
(IS13/IS14)
EL83021U
(IS10/IS40)
PWB assembly MAIN EL83021U
(IS10/IS40)
No
SN74LVC1G126
(IS11/IS12/IS41/IS42)
YES
NG
16
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
PWB assembly Main
Check at operating mode
(Make sure the state of MUTE and Volume)
No sound
infinity
about 8
Speaker
Disconnect the speaker from the
PWB assembly Main, andmeasure itsresistance.
The check after parts change
1. PC power supply OFF
2. Connection of cable
3. Projector starting
4. PC starting
*When not operating :
PC set up change of cable.
Can not control to RS-232C
NO
YES
Use cross cable
Check the
RS-232C cable.
Are pin No. 2 and 3
crossed?
Make sure PC setup
NO
YES
PWB assembly MAIN
Are the
signals input at each
pins on the PWB assembly
Main?
: RX
: TX
EK01
EK01
17
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
NODoes the Lamp
on upper left of the
Network connector light
in green?
Can’t communicate with computer
via NETWORK terminal.
Check at operating mode
Make sure Network
hardware
Set IP address and Subnet
Mask in the Settings >
Network menu with manual
operation.
Is IP Address inthe Network > Information menu
set to “0.0.0.0” after waitingmore than 1 minute?
YES
YES
NO
Are both IP Address
and Subnetmask in the Setting >Network > Network Info menu set to
"0.0.0.0" after waiting more than1 minute?
PWB assembly Main
Use new LAN cable
YES
Set IP address and Subnet Mask
in the Advanced Menu > Network
> IP ADORESS and > SUBNETMASK
menu with manual operation.
Is the DHCP in the
Advanced Menu > Network> DHCP is on?
NO
Is the computer
connected with the
projector directly?
If Subnet Mask is
"255.255.255.0", are "xxx.yyy.zzz" portion of IP address
setting of computer and projector same?
PWB assembly Main
YES
Is there
DHCP server on
the network which the
projector is connected
to?
Make sure those settings
of the projector and
computer are correct.
PWB assembly Network
PWB assembly Network
PWB assembly Network
NO
YES
NO
YES
NO
Use the same IP address
setting except for "N" on
computer and projector.
YES YES
NO
IP address: xxx.yyy.zzz.N
NO
Are there
any damage to the cable
between computer and
projector?
18
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
6. Service points6-1 Lead free solder [CAUTION]
This product uses lead free solder (unleaded) to help preserve the environment. Please read these
instructions before attempting any soldering work.
Lead free solder indicator
Printed circuit boards using lead free solder are engraved with an "F" or "LF".
Properties of lead free solder
The melting point of lead free solder is 40-50˚C higher than leaded solder.
Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not
taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
Precautions when using leaded solder
Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the
lead free solder has been completely melted (do not apply the soldering iron without solder).
Servicing soldering iron
A soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.
Recommended soldering iron:
Soldering iron with temperature control function (temperature range: 320-450˚C)
Recommended temperature range per part:
Part Soldering iron temperature
Mounting (chips) on mounted PCB 320˚C±30˚C
Mounting (chips) on empty PCB 380˚C±30˚C
Chassis, metallic shield, etc. 420˚C±30˚C
(1) PWB assembly MAIN
(2) PWB assembly REMOTE
(3) PWB assembly NETWORK (not PJ656)
(4) PWB assembly BATTERY (not PJ656)(5) POWER UNIT (BALLAST)
(6) POWER UNIT (CIRCUIT)
The PWB assembly which has used lead free solder
CAUTIONAlways wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder
can splatter at high temperatures (600˚C).
19
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
6-2 Before Replacing The LCD/Lens Prism
You should not replace separately the parts of the liquid crystal LCD/Lens prism because it works properly
only when used together. Therefore, regarding these parts, you can either replace part, LCD/Lens prism
assembly, or send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the
malfunctioning part, recondition the device and send it back to you.
DISTRIBUTOR HITACHI
G PanelDo not disassemble the unit
because replacement of separate
parts is not possible.
ReturnReplacement of G Panel & Reconditioning
1. Preparation
Please prepare cleaning tools and materials as follows. And prepare relatively clean room not to work in
additional dust, while removing operation.
(1) Swab for cleaning : P#: NX08061, "Cotton stick L147"
(2) Air duster (Dust blower, spray can)
(3) Vacuum cleaner
2. Disassemble and setting up.
(1) Turn off the projector, and unplug the power cord.
(2) Remove the lamp cover and upper case, according to the disassembling diagram of chapter 8.
(3) Unscrew the shild sheet and disconnect the LCD panel flexible cables.
(4) Unscrew PWB assembly MAIN to make it free.
Frexible cables of LCD panel
PWB assembly MAIN
Remove these screws
6-3 Cleaning up dust from panels and optical filters
WARNING
Wear sunglasses to protect your eyes when you maintain the projector with its lamp on.
(5) Press and hold the switch S801 using an insulator during maintenance.
(6) Keep the unscrewed wires away from all of electric parts.
Remove these screwS801
20
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
3. Maintenance point
Each color part has same
construction.
By using swab and air duster,
you can easily remove dust
from panel and optical filter.
4. Cleaning the panels and optical filters
(1) Turn on the set and lit on the lamp.
(2) By using swab and air duster, remove the dust. Focusing dust makes you check the dust on screen.
• While removing the dust, separated dust will
be blown off by air cooling system.
• Please pay attention not to damage panels
and optical filters.
5. Re-assembly
(1) Turn off the set and unplug the power cord.
(2) Remove an insulator from S801.
(3) Screw down the PWB assembly MAIN and connect the LCD panel flexible cables to the PWB assembly MAIN.
(4) Re-assemble the set.
(5) While re-assembling, please clean the air filter and the filter cover by using a vacuum cleaner.
Air Optical filter
Holder
Panel
Swab
Actual formation
Panel
Holder
Optical filter
Swab
Separatied formation
21
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
6-4 Battery
6-4-1 Replacing Internal Clock Battery
1. Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
2. After making sure that the projector has cooled adequately, slowly turn over the
projector, so that the bottom is facing.
3. Remove the battery cover.
Turn the battery cover in the direction indicated “OPEN” using such as coins.
Then the battery cover will come up. While removing the battery cover, pick its
knob.
4. Take the old battery out.
Press the metal claw of the battery holder. Then the battery will come up.
Remove the battery.
5. Put a new battery in.
Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another
battery may present a risk of fire or explosion.
Insert a new battery in the battery holder according to its minus terminal as
indicated in the battery holder, so that the side marked by + is facing. And push
the battery into the battery holder fully to fix.
6. Close the battery cover. Replace the battery cover in place, then turn it in the
direction indicated “CLOSE” using such as coins, to fix.
If the battery is placed in the battery holder upside-down, follow the procedure below to remove and reload
it properly.
1. Remove the battery cover as described in steps 1 through 3 above.
2. Turn the projector over again, so that the top of the projector is facing up.
3. While lifting the side of the projector closest to the lens, press the metal claw of the battery holder. The
battery will fall out of the holder, so be careful not to lose it.
4. Turn the projector over once more, so that the bottom faces up, and reload the battery correctly.
Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped,
please replace the battery according to the following procedures.
Battery Cover
Knob Metal claw
“+” marking
NOTE
• The internal clock’s time will be reset when the battery is removed. Please reconfigure the time via the menu or a web browser after replacing the battery.
WARNINGAlways handle the batteries with care and use them only as directed. Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution
of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do
not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
If the battery is placed in the battery holder upside-down, it may be hard to remove.
• Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency
treatment.
• Do not short circuit or solder a battery.
• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid adheres
to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
22
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus and minus terminals as indicated in the
remote control.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into place.
6-4-2 Putting batteries into the remote control
23
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
6-5 Air filter
WARNING
• Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.• Use only the air fi lter of the specifi ed type. Do not use the projector with the air fi lter and the fi lter cover removed. It could result in a fi re and/or malfunction to the projector.• The air fi lter should be cleaned periodically. If the air fi lter becomes clogged by dust or the like, internal temperatures rise and could cause a fi re, a burn and/or malfunction to the projector.
NOTE
• Please replace the air fi lter when it is damaged or too soiled, and also when you replace the lamp.• Please reset the fi lter time only when you have cleaned or replaced the air fi lter, for a suitable indication about the air fi lter.• The projector may display the message such as “CHECK THE AIR FLOW” or turn itself off, to prevent the internal heat level rising.
If the air fi lter becomes clogged by dust or the like, internal temperatures rise and could cause a fi re, a burn and/or malfunction to the projector. When the indicators or a message prompts to clean the air fi lter, clean the air fi lter as soon as possible.Please check and clean the air fi lter periodically, even if there is no message.Please replace the air fi lter when it is damaged or too soiled.
And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector.
1. Turn the projector off, and unplug the power cord. Allow the lamp to
cool for at least 45 minutes.
2. When the projector is suspended from the ceiling, apply the vacuum
cleaner to and around the fi lter cover fi rst, to prevent penetration of
dust or the like.
3. While supporting the projector with one hand, use your other hand to
pull the fi lter cover forward in the direction of the arrow. Remove the
air fi lter.
4. Apply a vacuum cleaner to the air fi lter and the fi lter cover. Please replace the air fi lter when it is damaged
or too soiled.
5. Replace the air fi lter in its original position. Secure the air fi lter in place by pressing each of the six
locations.
Make sure there is no dust or dirt remaining after the cover is in place.
If any dust or dirt remains, use a vacuum cleaner to remove it as when
placing the fi lter cover on the air fi lter.
Reattach the fi lter cover to the projector by aligning the fi lter cover with
the grooves on the projector. While holding the handle, push down on
the fi lter cover until it locks fi rmly in place.
6. Turn the projector on and reset the fi lter time using the FILTER TIME
function.
(1) Press the MENU button to display a menu. When the EASY MENU has
appeared, please skip the next step (2).
(2) Point at the “OPTION” in the left column of the menu using /
button, then press the button.
(3) Point at the “FILTER TIME” using / button, then press the button. A dialog will appear.
(4) Press the button to select “RESET” on the dialog. It performs resetting the fi lter time.
Handle
Filter cover
Filter cover
Air fi lter
Air fi lter’s knob
mark
24
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
6-6 Lamp
WARNING
The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn
out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different life-
time, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it
is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape
from the projector’s vent holes.
About disposal of a lamp • This product contains a mercury lamp; do not put it in the trash. Dispose of
in accord with environmental laws.
For lamp recycling, go to www.lamprecycle.org. (in the US) For product disposal, contact your local gov-
ernment agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).
• If the lamp should break (it will make a loud bang when it does), unplug the power cord from
the outlet. Note that shards of glass could damage the projector’s internals, or cause injury
during handling.
• If the lamp should break (it will make a loud bang when it does), ventilate the room well, and
make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes
or mouth.
• Before replacing the lamp, turn the projector off and unplug the power cord, then wait at least
45 minutes for the lamp to cool suffi ciently. Handling the lamp while hot can cause burns, as
well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from above. This is dangerous,
since if the lamp’s bulb has broken, the shards will fall out when the cover is opened.
• Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that
the screws are screwed in fi rmly. Loose screws could result in damage or injury.
• Use only the lamp of the specifi ed type.
• If the lamp breaks soon after the fi rst time it is used, it is possible that there are electrical
problems elsewhere besides the lamp. If this happens, contact your local dealer or a service
representative.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time could cause it dark, not to light up or to burst. When
the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as
possible. Do not use old (used) lamps; this is a cause of breakage.
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
Disconnect
the plug
from the
power
outlet
25
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
NOTE
• Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
Replacing the Lamp
A lamp has a fi nite product life. Using the lamp for long periods of time could cause the pictures darker or
the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after
being started using.
1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for
at least 45 minutes.
2. Prepare a new lamp.
3. Loosen the lamp cover screw (marked by arrow) and then slide the lamp
cover to the side to remove it.
4. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the
lamp by the handles.
5. Insert the new lamp, and retighten fi rmly the two screws that are loosened
in the previous process to lock it in place.
6. Slide the lamp cover back in place and fi rmly fasten the lamp cover screw.
7. Turn the projector on and reset the lamp time using the LAMP TIME
function in the OPTION menu.
(1) Press the MENU button to display a menu. Only when the EASY MENU
has appeared, please perform the next step (2).
(2) Point at the “Go To Advance Menu …” in the menu using / button, then
press the button.
(3) Point at the “OPTION” in the left column of the menu using / button,
then press the button.
(4) Point at the ”LAMP TIME” using / button, then press the button. A
dialog will appear.
(5) Press the button to select “RESET” on the dialog. It performs resetting the lamp time.
Lamp cover
Screw
Handle
Screws
26
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
6-7 Other care
WARNINGBefore caring, make sure the power switch is off and the power cable is not plugged in, and then allow the
projector to cool suffi ciently. The care in a high temperature state of the projector could cause a burn and/
or malfunction to the projector.
Avoid wetting the projector or inserting liquids in the projector. It could result in a fi re, an electric shock, and
and/or malfunction to the projector.
• Don’t put a container containing water , cleaner or chemicals near the projector.
• Don’t use aerosols or sprays.
CAUTIONPlease take right care of the projector according to the following. Incorrect care could cause not only an
injury but adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of the projector, it needs to clean and inspect the projector about once a year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the
lens, being cautions of the handling.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available
lens-cleaning wipe. Do not touch the lens directly with your hand.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
2. After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a nautral cleaner dilute in water, and wipe lightly after wringing
well. Then, wipe lightly with a soft, dry cloth.
27
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
6-8 Notice of AUTO adjustment
Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and
H_PHASE automatically.
In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts
in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly
distinguished to period of blanking on signal processing.
To avoid such phenomena, AUTO function should be used with the full size picture that has bright tone on its
peripheral.
Note
1) The phenomenon at the failure of AUTO adjustment depends on resolution of input source, scene of pic-
ture etc.
2) There is no failure above in AUTO with video source through VIDEO, S-VIDEO or COMPONENT input. The
reason is why recognition of input signal’s standard does not need to search the capture range from input
signal itself.
Image when AUTO fails.
Noting image of top or bottom lines.
Shift of the image to East or West.
Artifacts on image. Etc.
Image when AUTO operates correctly
28
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
6-9 PIN LOCK System (NOT PJ656)If the following PIN BOX menu appears after power on the projector, the PIN LOCK system has been acti-
vated. Under such a condition, key operations and signal displaying are inhibited. To open the PIN LOCK
system, we need to input the correct 4 digits PIN CODE. If correct PIN CODE is not input in 5 min., the lamp
will be automatically turned off.
PIN BOX
Returning repaired unit
Use the Master PIN code. See the paragraph of Releasing the PIN LOCK system inactivation.
Swap unit/Returned unit
Inactivate the PIN LOCK system. See the paragraph of the PIN LOCK system inactivation.
Releasing the PIN LOCK System
When the PIN BOX menu is displayed, sequentially enter the codes with remote controller as follows. In
accordance with remote controller button entry, “ ” mark appears in the PIN BOX menu.
Master PIN codes
1st entry code: Press the “MENU” button.
2nd entry code: Press the “ ” button.
3rd entry code: Press the “KEYSTONE” button.
4th entry code: Press the “ ” button.
Note: The Master PIN codes can be used up to 30 times. The codes cannot be used thereafter. If the Master
PIN codes cannot be used, see the paragraph of the PIN LOCK system inactivation.
The PIN LOCK System inactivation
1. When the PIN BOX menu is displayed, press “RESET” for 3 seconds or more in order to get the ID Inquir-
ing Code.
PIN BOX (ID Inquiring Code)
2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code.
3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI
sales company informed.
4. Open menu and select “TURN OFF” from the PIN LOCK items in the OPTION menu. Then the PIN BOX
menu appears.
5. Input the correct PIN code in the PIN BOX menu.
6. And then, the OPTION menu appears.
After the PIN LOCK system is inactivated, the PIN BOX is no longer displayed in the OPTION menu.
If the PIN LOCK items are kept displaying, the PIN LOCK system is not inactivated yet. Input the correct PIN
CODE again.
PIN BOX
Inquiring Code
Inquiring Code1 2 1 2 3 4 1 2 3 4
29
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
6-10 MyScreen PIN LOCK (NOT PJ656)MyScreen PIN LOCK is a function to disable capturing and storing a picture for MyScreen by using the PIN.
Follow the procedure below to use this function.
How to activate MyScreen PIN LOCK
1. Open the user menu and go to the advance menu.
2. Go down to “SCREEN” and go right and select “MyScreen LOCK”.
3. Go right and get the following dialog. Press the button one time and
keep pressing the button in 2nd time (for about 3sec. or more).
4. The following window comes up. Enter your PIN.
5. Re-enter your PIN correctly, and press the button.
6. You will see your PIN for confirmation for a while.
7. PIN lock is activated.
How to inactivate the MyScreen PIN LOCK
To inactivate the PIN lock, go to “MyScreen PIN LOCK” and select
“Turn OFF”. After the following dialog appears, enter the PIN.
If you forget the PIN, you need to tell the Inquiring code to HITACHI
to decode the PIN.
6-11 Related Messages
When the unit’s power is on, messages such as those shown below may be displayed. When any such message
is displayed on the screen, please respond as described below.
Although these messages will be automatically disappeared around several minutes, it will be reappeared every
time the power is turned on.
Message Description
NO INPUT IS DETECTEDON ***
There is no input signal.Please confi rm the signal input connection, and the status of the signal source.
SYNC IS OUT OF RANGEON *** fH *****kHz fV *****Hz
The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit.Please confi rm the specs for this unit or the signal source specs.
CHECK THE AIR FLOW
The internal portion temperature is rising.Please turn the power OFF, and allow the unit to cool down at least 20 minutes. After having confi rmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? • Is the air fi lter dirty? • Does the peripheral temperature exceed 35°C? • If the same indication is after the treatment, please set the HIGH at FAN SPEED
of the item SERVICE of the OPTION menu.
REMINDER***HRS PASSED AFTER THE
LAST FILTER CHECK.FILTER MAINTENANCE IS ESSENTIAL
TO REMOVE WARNING MESSAGE,RESET FILTER TIMER.
SEE MANUAL FURTHER INFO.
A note of precaution when cleaning the air fi lter.Please immediately turn the power OFF, and clean or change the air filter by referring to the “Air Filter” section of this manual. After you have cleaned or changed the air fi lter, please be sure to reset the fi lter timer.
30
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
6-12 Regarding the indicator lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the mean-ings as described in the table below. Please respond in accordance with the instructions within the table.
POWER
indicator
LAMP
indicator
TEMP
indicatorDescription
Lighting
In Orange
Turned
off
Turned
off
The projector is in a standby state.
Blinking
In GreenTurned off Turned off
The projector is warming up.
Please wait.
Lighting
In GreenTurned off Turned off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In OrangeTurned off Turned off
The projector is cooling down.
Please wait.
Blinking
In Red
(discre-
tionary)
(discre-
tionary)
The projector is cooling down. A certain error has been detected.
Please wait until the POWER indicator fi nishes blinking, and then perform the proper measure
using the item descriptions below.
Blinking
In Red
or
Lighting
In Red
Lighting
In RedTurned off
The lamp does not light, and there is a possibility that interior portion has become heated.
Please turn the power off, and allow the projector to cool down at least 20 minutes.After the
projector has suffi ciently cooled down, please make confi rmation of the following items, and then
turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air fi lter dirty?
• Does the peripheral temperature exceed 35ºC?
If the same indication is displayed after the remedy, please change the lamp referring to the
section “Lamp”.
Blinking
In Red
or
Lighting
In Red
Blinking
In RedTurned off
The lamp cover has not been properly fi xed (attached).
Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector
has suffi ciently cooled down, please make confi rmation of the attachment state of the lamp
cover. After performing any needed maintenance, turn the power on again.
Blinking
In Red
or
Lighting
In Red
Turned offBlinking
In Red
The cooling fan is not operating.
Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector
has sufficiently cooled down, please make confirmation that no foreign matter has become
caught in the fan, etc., and then turn the power on again.
If the same indication is displayed after the remedy, please replace a fan.
Blinking
In Red
or
Lighting
In Red
Turned offLighting
In Red
There is a possibility that the interior portion has become heated.
Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector
has suffi ciently cooled down, please make confi rmation of the following items, and then turn the
power on again.
• Is there blockage of the air passage aperture?
• Is the air fi lter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please set the FAN SPEED of the SERVICE
item in the OPTION menu to HIGH.
Lighting
In Green
Alternative
blinking in Red
There is a possibility that the interior portion has become overcooled.
Please use the unit within the usage temperature parameters (5°C to 35°C). After the treatment,
resent the power to ON. If the same indication is displayed after the treatment, please make
sure that the proper cables are connected to each of connectors E301 and E302 on the PWB
assembly MAIN.
Lighting
In Green
Simultaneous
blinking in Red
It is time to clean the air fi lter.
Please immediately turn the power OFF, and clean or change the air fi lter referring to the section
“Air Filter”. After cleaning or change the air fi lter, please be sure to reset the fi lter timer. After the
remedy, resent the power to ON.
Blinking in
Green for
approx. 3
seconds
Turned
off
Turned
off
At least 1 "Power ON" schedule is saved to the projector.
(Please refer to the User's Manual Network Functions: Schedule Settings for more information)
NOTE • When the interior portion has become overheated, for safety purposes, the power source is automati-
cally turned off, and the indicator lamps may also be turned off. In such a case, press the “” (OFF) side of the
power switch, and wait at least 45 minutes. After the projector has suffi ciently cooled down, please make con-
fi rmation of the attachment state of the lamp and lamp cover, and then turn the power on again.
(NOT PJ656)
31
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
By the control panel By the remote control transmitter
1. Display the Advance menu by
the “MENU” button.(If EASY
MENU appears, choose “Go to
Advance menu” to display
ADVANCE MENU.)
2. Select the “OPTION” on the
menu.
3. Continue press the button [ ]
fi rst, then press the button [ ]
together with “INPUT”, and hold
for 3 seconds.
1. Display the menu by the
“MENU” button. (If EASY
MENU appears, choose “Go to
Advance menu” to display
ADVANCE MENU.)
2. Select the “OPTION” on the menu.
3. Press the “MAGNIFY OFF”
button.
Next hold the “MAGNIFY OFF”
button for 3 seconds.
To display the OSD for “HIDDEN SERVICE MENU” set up.
6-13 HIDDEN SERVICE MENU
6-14 RUN TIME window
SOFT RESET
If this is executed, all of the user data is initialized. Never use it when not required.
Set operating time display method (accumulated lamp time display method)
1. Select “OPTION” from the Advance menu, then place the cursor on the “LAMP TIME”.
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or
more to display the screen shown below. (The menu will close after 10 seconds if there are no further
operations.)
4. Use [ ] and [ ] buttons to select the usage status number. (The usage status is as shown below.)
Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
10..... Total time(hrs.) the projector has been used in both stand-by
and operation
Time
Number of times on
Number of times off
Usage status number (See below)
RUN TIME
1234
On 12
OFF 11
No.1
32
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
6-15 Reset of the Network Web password / User ID, Network Control password
ATTENTION : Performing this operation initializes the network settings. If the projector has
the customized settings in the network, make a note of the network settings to restore
them before this operation.
1. Display the NETWORK menu.
2. Select “TURN OFF” in the item of DHCP.
3. Enter “255.255.255.255” in the item of IP ADDRESS.
4. Enter “255.255.255.255” in the item of SUBNET MASK.
5. Enter “255.255.255.255” in the item of DEFAULT
GATEWAY.
6. While NETWORK menu is displayed, press the RESET button of the remote control.
7. Press button to execute reset.
The operation described above resets not only Web password but also NETWORK settings.
NOTE:
When you execute this reset operation with any other settings than above (described in the
step 2 to 5), the WEB password, SNTP server address, DATE AND TIME and other sched-
ule settings are not initialized, but the network settings (DHCP, IP ADDRESS, SUBNET
MASK and DEFAULT GATEWAY) are initialized.
8. If the network settings had been customized, restore them by manual operation.
Press RESET button
33
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)/PJ656(CC
9XM)
CNPOW
CNPWR
TSW
FB5 CN102
CN103
CN101
FG1
FB1
Z1
Z2 cable tie
FB2
FB2
20±5mm
CNPWR
7. Wiring diagram
Wiring diagram 1
Wiring of the circuit power supply (1/2)
Wiring of the circuit power supply main board
(1)Attach the FB1
(2)Connect the TSW. Make sure to confirm the seal (based
on the diagram below) when attaching the TSW.
(3)Connect the CNPWR, attach FB2
(4)Connect the CNPOW, attach FB5
The operations with this symbol have implica-
tions with laws/standards. It is possible to be in
violation of these laws/standards in the case
that these operations are not carried out accord-
ing to the instructions. Assemble according to
the operation instructions.
Area of Importance
Make sure to securely connect the CNPOW, TSW,
and CNPWR to the circuit power supply (as it cannot
be confirmed whether they are securely connected in
later processes).
Make sure to confirm the print of the TSW.
Area of Importance
C o n f i r m t h a t t h e p r i n t i n d i c a t e s
“YS11A85A – ”
Attach the FB5 (ferrite core) to CNPOW.
Make sure to completely lock the hook
when attaching the FB5.
It is not necessary to secure the FB5 with a
cable tie.
Area of Importance
Attach the FB1 (ferrite core) to the
FG1 wire of the circuit power supply.
Make sure to completely lock the
hook when attaching the FB1.
Secure the FB1 around the center of
the FG1 with the cable tie Z1.
Cut the cable tie with 2 to 3 mm of
excess length remaining.
Area of Importance
Attach the FB2 (ferrite core) to the CNPWR.
Make sure to completely lock the hook when
attaching the FB2.
Secure the FB2 to the CNPWR with the cable
tie Z2, as indicated in the diagram.
Cut the cable tie with 2 to 3 mm of excess
length remaining.
Area of Importance
Circuit power supply
34
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)/PJ656(CC
9XM)
CNPOW
TSWFastener
View fromabove
View fromthe side
Correct Incorrect Incorrect(dotted line)
Power supplysheetPower supply sheet
Power supply sheet
Power supply case
CNPWR
Clamp Clamp
Outline of power supplycase holes
Fasten the E2 with tape ZTP1. Make sure to stick the tapealong the outline of the power supply case holes as shownin the diagram.
FB5
FG3
FB2
FG1CN103
CN101 C104
CN102
FB1
ZTP2
ZTP1
CNSH2 E2
C104C104
Correct(solid line)
Louver ofthe powersupply case
Don’t wire the E2 on the louvers.The solid line in the diagram indicates an example of correct wiring.The dotted lines in the diagram indicate examples of incorrect wiring.
Wiring diagram 2
Wiring of the circuit power supply (2/2)
Wiring of the circuit power supply board
(1)Style the CNPOW, TSW, and FG3.
(2)Attach the CNSH2
(3)Attach the power supply sheet.
(4)Style the CNPWR.
Lock the CNPOW, TSW, and FG3 by passing them
through the power supply case fastener.
Make sure to pass the CNSH2
through the hole indicated in the
diagram below.
[CAUTION]
Make sure to attach the power
supply sheet after attaching the
CNSH2.
Pass the CNPWR through
the hole in the power supply
sheet, and pull the wire out.
When pulling out the CNPWR and
FB2, make sure that they do not pass
over the C104 (electrolytic capacitor),
as this will cover the anti-explosion
valve on the top of the capacitor.
Fasten the CNSH2 and E2 with
tape, ZTP1 and ZTP2, after pass-
ing them through the clamps of the
power supply case.
[CAUTION]
As the upper case touches the gray
areas of the diagram on the right, make
sure no wires protrude into these areas.
Circuitpowersupply
C104C104
35
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)/PJ656(CC
9XM)
Wiring diagram 3
CNBAR
Sirocco fan lead
Ballast sheet
Ballast power supply
CNBAR
CNBAR
Siroccofanlead
Siroccofanlead
Siroccofan
FB4
FB4
FB3
FB4
Ballast power supply
Ballast sheet
40±5mm
ZTP5
Wiring of the ballast power supply
Wiring of the ballast power supply board
(1)Attach and wire the FB3 to the lamp lead
(2)Attach the FB4, and wire the CNBAR and
sirocco fan.
Wire the lamp lead of the
ballast power supply by
passing i t through the
groove in the bottom case.
Make sure the sag in the
wires is absorbed in the
direction of the arrow.
Pull out the lamp lead of
the ballast power supply
by passing it through the
slit in the ballast sheet.
Style by turning the boss
on the bottom case.
Attach the FB3 (ferrite core) to
the lamp lead of the bal last
power supply.
Make sure to completely lock the
hook when attaching the FB3.
It is not necessary to secure the
FB3 with a cable tie.
Area of Importance[CAUTION]
Be careful when handling the ballast power supply.
Do not hold the small circuit board of the ballast power supply.
Make sure to connect the CNBAR before attaching the ballast power supply.
Pull out the CNBAR, sirocco fan lead,
and FB4 from the sheet hole after pass-
ing them under the ballast sheet.
Make sure the sag in the wires is
absorbed in the direction of the arrow.
Attach the FB4 (ferrite core) to the
CNBAR and sirocco fan lead.
Wind the CNBAR around once.
Make sure to completely lock the hook
when attaching the FB4.
It is not necessary to secure the FB4
with a cable tie.
Area of Importance
[CAUTION]
Be careful of where you
attach the FB4.
If the wire of the CNBAR
sags, it will get close to the
primary circuit inside the
ballast power supply.
Therefore, be careful of
where you attach the FB4,
as it prevents the CNBAR
wire from sagging.
Be careful not to
p inch the w i res
when locking.
Style the sirocco fan
l e a d b y w i n d i n g i t
around the top, to pre-
vent the lead escaping
the hook.
Fasten the fan lead with
tape ZTP5 after styling.
36
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)/PJ656(CC
9XM)
Wiring diagram 4
CNPWR
CNSH
Lamp door bracket Power supply case bracket
Upper case
Lamp house
Bottom case
Pass the CNSH
through this gap.
Cross-sectional diagramof this area
Lampsirocco
lead
Circuit power supply
Batteryboard
Wiring of the power supply block
Wiring when assembling the power supply block
(1)Connect and wire the CNPWR.
(2)Wire the CNBAR and sirocco fan lead.
Attach the power supply block.
(3)Connect and wire the CNSH.
(4)Wire the lamp sirocco fan lead.
Wire the lamp sirocco
fan lead along the side
of the battery board.
[CAUTION]
Complete the pull ing
out of the lamp sirocco
fan lead before attach-
ing the optical engine.
Connect the CNPWR to the ballast power supply.
Make sure it is securely connected.
(as it cannot be confirmed whether they are
securely connected in later processes).
[CAUTION]
Assemble the power supply block after connecting
the CNPWR.
Connect the CNSH to the lamp door bracket and power
supply case bracket.
Pass the CNSH through the hole below the lamp door
bracket, and style it by passing it through the gap between
the bottom case and lamp house.
Make sure the excess length of the wires is absorbed in the
direction of the arrow.
[CAUTION]
Connect the CNSH to the power supply case side only after
assembling the power supply block.
Area of Importance
[CAUTION]
Be careful not to pinch
the CNBAR and sirocco
fan lead when attaching
the power supply unit.
Ballast power supply
Tighten this screw manually, pressing the power supply case toward
the bottom case,
so that the power supply bracket does not strain.
Area of Importance
37
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)
40mm±10mmFB6CNBATFB7
CNNET
FB8
FB6FB6 FB7
CNNETCNBAT
CNNET
CNBAT
Wiring of the network board
Wiring when attaching the network board
(1) Attach the FB6 to the CNBAT.
(2) Connect the CNBAT, tentatively attach the network board.
(3) Attach the FB7 (and FB8 in CC9XMN chassis only) to the CNNET.
(4) Attach the network shield, connect the CNBAT and CNNET.
(5) Attach the network shield.
Battery board sideBattery board side
Network board side
Network board side
Attach the FB6 (ferrite core) to the CNBAT.
Make sure to completely lock the hook when
attaching the FB6.
It is not necessary to secure the FB6 with a
cable tie.
Area of importance
Batteryboard
Connect the CNBAT to
the battery board before
attach the battery board
to the bottom case.
Put the network board on the
bottom case before attaching
the optical engine (Do not
secure the network board
with screws in this step).
Note that the network board
can be removed with the
optical engine attached.
Network board
Twist the CNNET at least 5 times before attaching
the FB7 and FB8 (ferrite cores).
You can twist in either direction.
Area of importance
Attach the FB8 (ferrite core) to the CNNET. Make sure to completely lock the hook
when attaching the FB8. It is not necessary to secure the FB8 with a cable tie.
After attaching FB8, fold the tape ZTP6 around CNNET to prevent FB8 from shifting.
After attaching the network shield, connect the CNBAT and CNNET to the network board.
Area of importance
As the video terminal is
p laced on the shaded
area, avoid wiring there.
Network shield
Attach the FB7 (ferrite core) to the CNNET. Make
sure to completely lock the hook when attaching
the FB7.Area of importance
It is not necessary to secure the FB7 with a cable tie.
Attach the network shield so that the
CNBAT and CNNET are covered in the
network shield. Make sure to insert the
network shield into the gap between the
network board and the bottom case.
Put FB6 to the bottom side, and wire FB7
and FB8 above FB6.
Area of importance
Network shield Insert into gap
FB
6
Netw
ork
board
Bottom case
Battery board
ZTP6
Fold the tape ZTP6 around CNNET.(To prevent FB8 from shifting.)
This is necessary f o r C C 9 X M N chassis only.
ZTP6FB8
FB7,FB8
Wiring diagram 5
37a
PJ
65
6(C
C9
XM
)
Wiring diagram 5a
TSW
TSW
Main board
Main board
Main board
CNBAR
CNPOW
Power supply unit
Optical unit
LCD panel flexible cable
Wind around 5 times.
Fasten the end of the winding
area with tape ZTP3.
LCD panelflexible cable
LCD panelflexible cable
Optical unit
Optical unit
Power supply unit
Power supply unit
Siroccofan
E802 E800E804
FB2
FG3 E2
CNSH2
CNSH2
ZTP3
Exhaustfan
Wiring when attaching the main board (1/2)
Wiring when attaching the main board
(1)Prepare the TSW and CNSH2.
(2)Temporarily style the E2, FG3, exhaust fan, and
TSW/CNSH2.
(3)Connect the CNPOW, CNBAR, and sirocco fan to
the main board.
(4)Attach the main board, and style the connectors.
After lifting up the main board,
connect the CNPOW, CNBAR,
and sirocco fan.
With the connector connected, insert the terminal
side of the main board into the bottom case, and
pass the LCD panel flexible cables through the
holes in the board.
Confirm that none of the connector wires are
pinched, and attach the main board. Insert the
wires and core in the gap between the optical unit
and the power supply unit.
When attaching the main board, keep the
wires of E2, FG3, exhaust fan, and TSW
and CNSH2 (which have been prepared)
out of the way by placing them on the top of
the power supply unit.
Connect the CNPOW,
CNBAR, and sirocco fan
to the main board before
attaching the main board.
Wind the TSW around the CNSH2 5 times.
Fasten the end of the winding area with tape.
Keep the prepared TSW and CNSH2 out of
the way by placing them on the top of the
power supply unit.
Area of Importance
Power supply
unit
38
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)
Wiring diagram 6
TSW
TSW
Main board
Main board
Main board
CNBAR
CNPOW
Power supply unit
Optical unit
LCD panel flexible cable
Wind around 5 times.
Fasten the end of the winding
area with tape ZTP3.
LCD panelflexible cable
LCD panelflexible cable
Optical unit
Optical unit
Power supply unit
Power supply unit
Siroccofan
E802 E800E804
FB2
FG3 E2
CNSH2
CNSH2
ZTP3
Exhaustfan
Wiring when attaching the main board (1/2)
Wiring when attaching the main board
(1)Prepare the TSW and CNSH2.
(2)Temporarily style the E2, FG3, exhaust fan, and
TSW/CNSH2.
(3)Connect the CNPOW, CNBAR, and sirocco fan to
the main board.
(4)Attach the main board, and style the connectors.
After lifting up the main board,
connect the CNPOW, CNBAR,
and sirocco fan.
With the connector connected, insert the terminal
side of the main board into the bottom case, and
pass the LCD panel flexible cables through the
holes in the board.
Confirm that none of the connector wires are
pinched, and attach the main board. Insert the
wires and core in the gap between the optical unit
and the power supply unit.
When attaching the main board, keep the
wires of E2, FG3, exhaust fan, and TSW
and CNSH2 (which have been prepared)
out of the way by placing them on the top of
the power supply unit.
Connect the CNPOW,
CNBAR, and sirocco fan
to the main board before
attaching the main board.
Wind the TSW around the CNSH2 5 times.
Fasten the end of the winding area with tape.
Keep the prepared TSW and CNSH2 out of
the way by placing them on the top of the
power supply unit.
Area of Importance
Power supply
unit
38a
PJ
65
6(C
C9
XM
)
Wiring diagram 6a
CNSH2
TSW
CNRM
Remote control board
1. Hook the siroccofan lead and E1 onthe intake duct hook.
TSW
Intake duct hook
E3 Lamp siroccofan
Upper case
Main board
Main board
Hooked withthe CNRM wire.
Attach theupper case
A83speaker
Opticalunit
hook
ZTP4
Siroccofan
E1
E2
E3
A83
Lampsirocco
FG3
P601
P601
E301
E801
E801
Secure by slidingin the direction ofthe arrow
[CAUTION]Be careful whenhandling the LCDpanel flexible cable.
LCD panel
FPC connector
Clamp Exhaustfan
Exhaustfan
Screw
E1
Sirocco fan leadSirocco fan lead CNRM
E1
Procedure for wiring sirocco fan lead, E1 and CNRM
2. Pass CNRM belowthe sirocco fan leadand E1.
Pass below sirocco fan lead and E1.Duct hook
Connect the exhaust fan to
the main board after passing it
through the power supply
clamp and TSW.
[CAUTION]
Make sure that wires do not
pass through the shaded area
on the diagram below, as they
will be pinched by the ribs of
the upper case.
Wiring when attaching the main board (2/2)
Wiring when attaching the main board
(1)Connect the LCD panel flexible
cables.
(2)Connect the E2 and exhaust fan.
(3)Connect the speaker.
(4)Connect and style the E1 and
sirocco fan.
(5)Attach the remote control board and
connect and style the CNRM.
(6)Connect and style the E3 and lamp
sirocco fan.
C o n n e c t t h e A 8 3
(speaker) to the main
board.
Connect the sirocco fan
and E1 t o t he ma in
board a f te r pass ing
them through the intake
duct hook.
Connect the CNRM to
the main board f rom
a b o v e t h e A 8 3
(speaker), after passing
it below the sirocco fan
and E1 wires.
[CAUTION]
Prevent the wires from protruding to
the outside so that its wires connected
to the connector on the edge of the
main board, such as A83, are not
pinched and damaged into the casing
when attaching the upper case.
Connect the E3 and lamp
sirocco fan to the main board
after hooking them to the
optical unit hook.
Fasten them with tape ZTP4
after wiring.
Prevent the wires from pro-
truding to the outside.
Connect the E2 to the main board
after passing it through the clamp
of the power supply bracket.
39
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)
Wiring diagram 7
CNSH2
TSW
CNRM
Remote control board
1. Hook the siroccofan lead and E1 onthe intake duct hook.
TSW
Intake duct hook
E3 Lamp siroccofan
Upper case
Main board
Main board
Hooked withthe CNRM wire.
Attach theupper case
A83speaker
Opticalunit
hook
ZTP4
Siroccofan
E1
E2
E3
A83
Lampsirocco
CNNET
FG3
P601
P601
E301
E801
E801
Secure by slidingin the direction ofthe arrow
[CAUTION]
Be careful whenhandling the LCDpanel flexible cable.
LCD panel
FPC connector
Clamp Exhaustfan
Exhaustfan
Screw
E1
Sirocco fan lead
Sirocco fan lead CNRM
E1
Procedure for wiring sirocco fan lead, E1 and CNRM
2. Pass CNRM belowthe sirocco fan leadand E1.
Pass below sirocco fan lead and E1.Duct hook
Network board
Connect the exhaust fan to
the main board after passing it
through the power supply
clamp and TSW.
[CAUTION]
Make sure that wires do not
pass through the shaded area
on the diagram below, as they
will be pinched by the ribs of
the upper case.
Wiring when attaching the main board (2/2)
Wiring when attaching the main board
(1)Connect the LCD panel flexible
cables.
(2)Connect the E2 and exhaust fan.
(3)Connect the speaker.
(4)Connect and style the E1 and
sirocco fan.
(5)Attach the remote control board and
connect and style the CNRM.
(6)Connect and style the E3 and lamp
sirocco fan.
(7) Connect the CNNET.
C o n n e c t t h e A 8 3
(speaker) to the main
board.
Connect the sirocco fan
and E1 t o t he ma in
board a f te r pass ing
them through the intake
duct hook.
Connect the CNRM to
the main board f rom
a b o v e t h e A 8 3
(speaker), after passing
it below the sirocco fan
and E1 wires.
[CAUTION]
Prevent the wires from protruding to
the outside so that its wires connected
to the connector on the edge of the
main board, such as A83, are not
pinched and damaged into the casing
when attaching the upper case.
Connect the E3 and lamp
sirocco fan to the main board
after hooking them to the
optical unit hook.
Fasten them with tape ZTP4
after wiring.
Prevent the wires from pro-
truding to the outside.
Connect the E2 to the main board
after passing it through the clamp
of the power supply bracket.
Connect the CNNET to the network board.
Do not protrude the wire to the outside
39a
PJ
65
6(C
C9
XM
)
Wiring diagram 7a
CNSH2
TSW
TSW
CNSH2
FG3
FG3
Upper case rib hole
Attach the TSW with the printedside facing the lamp.
Circuit boardshield
Circuit boardshield
Power supply case
I/O metal
Screw down CNSH2 to the I/Ometal after passing it throughthe circuit board shield hole.
Wiring when attaching the circuit board shield.
When attaching the circuit board shield.
(1)Connect and wire the CNSH.
(2)Wire the TSW.
(3)Connect the FG3.
(4)Screw down the circuit board shield.
Make sure to screw down the
circuit board shield.
Area of Importance
Pull out the TSW through
the gap between the
shield and the I/O metal.
Wire the TSW to keep
its joint away from the
upper case rib hole.
Screw down the CNSH2 and circuit
board shield to the I/O metal at the
torque of 0.49±0.05N·m manually.
Area of Importance
[CAUTION]
Confirm that the wires are not protruding to the screw area.
Screw down the FG3 and circuit board
shield to the power supply case.
Area of Importance
40
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)
Wiring diagram 8
CNSH2
TSW
CNSH2
FG3
FG3
Circuit board
shield
Circuit board
shield
Power supply case
I/O metal
I/O metal
Main board
Tube
Screw
Screw down CNSH2 to the I/O
metal after passing it through
the circuit board shield hole.
TSW
Upper case rib hole
Attach the TSW with the
printed side facing the lamp.
Wiring when attaching the circuit board shield.
When attaching the circuit board shield.
(1)Connect and wire the CNSH.
(2)Wire the TSW.
(3)Connect the FG3.
(4)Screw down the circuit board shield.
Make sure to screw down the
circuit board shield.
Area of Importance
Pull out the TSW through
the gap between the
shield and the I/O metal.
Wire the TSW to keep
its joint away from the
upper case rib hole.
Screw down the CNSH2 and circuit
board shield to the I/O metal at the
torque of 0.49±0.05N·m manually.
Area of Importance
[CAUTION]
Confirm that the wires are not protruding to the screw area.
Screw down the FG3 and circuit board
shield to the power supply case.
Area of Importance
Pass the TSW lead over the screw head,
and insert the tube of the wire between
the I/O metal and the main board.
Make sure to confirm that the tube is not
put on the screw head.
41
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
8. Disassembly diagram
42
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
42a
PJ656(CC9XM)
43
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Notice
1. Detach and attach the upper case.
Follw the procedure below to detach and attach the upper case.
When disassembling
CAUTION
The lamp door must be removed before the upper case when disassembling the machine. If the upper
case is detached with the lamp door installed, the MAIN board might be damaged.
a. Remove the Lamp door.
b. Remove 7screws on the bottom and 3 screws on the rear to detach the upper case.
7 screws
3 screws
CAUTION
These are not screw holes. Do NOT insert a screw or screwdriver into them to avoid damaging the inside.
Loosen this screw
Lamp door
44
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
b. Tighten 7 screws on the bottom and 3 screws on the rear after attaching the upper case with the lamp door separated.
CAUTION
These are not screw holes. Do NOT insert a
screw or screwdriver into them to avoid damag-
ing the inside.
In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing down the upper case in the direction of the arrow. Be careful not to bend the outside casing.(Torque:0.39-0.59N•m)
When assembling
a. Before attaching the upper case. Make sure that the speaker wires are routed correctly.
NOTICE : Make sure that the soldering point of the wires and
the speaker is within the shaded area as indicated in
the drawing. Also, be careful not to change the origi-
nal shape of speaker cone.
Speaker cone
Soldering pointSpeaker wires
45
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
c. Attach the Lamp door.
2. Replacing the power units.
Remove the 4 screws to take off the ballast bracket.
NOTE : One of screws is behind the Front Shade.
Remove the Front Shade
Lamp door
Power supply bracket
CAUTION
The ballast bracket holding the bal-
last power unit is installed under-
neath the power supply bracket.
Be careful not to injure your fin-
gers or hand by the edges of the
ballast bracket during mainte-
nance around the power units.
CAUTION
When re-assembl ing,
tighten this screw at the
torque of 0.49±0.1N·m so
that the bot tom case
does not strain.Ballast bracket
CAUTION
Tighten this screw using a manual screwdriver.
46
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
3. Detaching and attaching the Panel Fan Duct assembly
(1) Put the thermistor in the correct position on the bottom case and fasten its wire with tape as shown in the diagram.
(2) Be careful not to put the lamp fan wires between the panel fan duct assembly and the bottom case in attach-ing the panel fan duct assembly.
Panel fan duct assembly
Lamp fan
Tape
Push each of hooks in the direction of the arrows, while lifting the panel fan duct assembly, when removing it.
Thermistor
When assembling
Remove 4 screws and unhook the panel fan duct assembly as shown in the diagram.
When disassembling
47
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
4. Attaching the dichroic optics unitPut the dichroic optics unit on the bottom case, and tighten screws in
order of 1, 2, 3 and 4 as shown in the diagram.
Some of dichroic optics units have an extra hole shown in the diagram.
Don’t attach a screw to this hole. If you tighten it, the optical perfor-
mance might become worse.
5. Replacing the exhaust fanBe sure to do the following works before changing the exhaust fan.
a. Make sure the contents of the new exhaust fan assembly (P#: GS01321).
Exhaust fan …………….1pcs
Fan cushion A ………… 2pcs
Fan cushion B ………… 1pcs
b. Assemble the exhaust fan and fan cushions as described below.
1) Attach the fan guard and the fan bracket to the new exhaust fan
using 2 screws.
2) Stick two pieces of the fan cushion A to the corners of the fan.
3) Stick the Fan cushion B along the top to side of the fan as
shown in the diagram.
Note:
• If you install the new exhaust fan without the fan
cushions, the fan vibration in operating might make
noise.
• Be careful not to invert the fan when assembling the
exhaust fan assembly.
Exhaust fan
FAN bracket
Frame of exhaust fan
Fan cushion B
0 to 1.0mm
5 to 15mm
Fan guard
Fan cushion A
Fan cushion A
48
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
MEMO
THE UPDATED PARTS LIST
FOR THIS MODEL IS
AVAILABLE ON ESTA
50
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
10. RS-232C communication
6789
12345 6 7 8 9
1 2 3 4 5
CONTROL port RS-232C
cable(Cross) RS-232C port of the projector of a computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) (8) DTS - (9) (9) RI
Connecting the cable
(1) Turn off the projector and the computer power supplies.
(2) Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C
cable(Cross). Use the cable that fulfills the specification shown in the previous page.
(3) Turn on the computer power supply and after the computer has started up, turn on the projector power
supply.
Communications setting
19200 bps, 8N1
1. Protocol
Consist of header (7 bytes) + Command data (6 bytes)
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low: Lower byte of CRC flag for command data
CRC_high: Upper byte of CRC flag for command data
3. Command Data
Command Data Chart
byte_0 byte_1 byte_2 byte_3 byte_4 byte_5
Action Type Setting code
low high low high low high
Action (byte_0 - 1)
Action Classification Content
1 Set Change setting to desired value.
2 Get Read projector internal setup value.
4 Increment Increment setup value by 1.
5 Decrement Decrement setup value by 1.
6 Execute Run a command.
51
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’+‘00H’) from the
computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes))
from the computer to the projector.
(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset Command)
(1) The computer sends the default setting code Header + Command data (‘06H’+ ‘00H’+ type (2 bytes) +
‘00H’+‘00H’) to the projector.
(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
(1) The computer sends the increment code Header + Command data (‘04H’+ ‘00H’+ type (2 bytes) +‘00H’+
‘00H’) to the projector.
(2) The projector in creases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (‘05H’+ ‘00H’+ type (2 bytes) +‘00H’ +
‘00H’) to the projector.
(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
When the projector cannot understand the received command
When the projector cannot understand the received command, the error code ‘15H’ is sent back to the com-
puter.
Sometimes the projector cannot properly receive the command. In such a case, the command is not exe-
cuted and the error code ‘15H’ is sent back to the computer. If this error code is returned, send the same
command again.
When the projector cannot execute the received command.
When the projector cannot execute the received command, the error code ‘1cH’ + ‘xxxxH’ is sent back to the
computer. When the data length is greater than indicated by the data length code, the projector ignore the
excess data code.
Conversely when the data length is shorter than indicated by the data length code, an error code will be
returned to the computer.
NOTE • Operation cannot be guaranteed when the projector receives an undefi ned command or data.
• Provide an interval of at least 40ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
52
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Command data chart
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
Power Set Turn off BE EF 03 06 00 2A D3 01 00 00 60 00 00Turn on BE EF 03 06 00 BA D2 01 00 00 60 01 00
Get BE EF 03 06 00 19 D3 02 00 00 60 00 00(Example return) 00 00 01 00 02 00 (Off) (On) (Cool down)
RGB2 Status Get BE EF 03 06 00 F1 D8 02 00 21 20 00 00 00 00 01 00 (RGB IN2) (RGB OUT)
Input Source Set RGB IN 1 BE EF 03 06 00 FE D2 01 00 00 20 00 00RGB IN 2 BE EF 03 06 00 3E D0 01 00 00 20 04 00
VIDEO BE EF 03 06 00 6E D3 01 00 00 20 01 00S-VIDEO BE EF 03 06 00 9E D3 01 00 00 20 02 00
COMPONENT BE EF 03 06 00 AE D1 01 00 00 20 05 00Get BE EF 03 06 00 CD D2 02 00 00 20 00 00
Error Status Get BE EF 03 06 00 D9 D8 02 00 20 60 00 00(Example return) 00 00 01 00 02 00 03 00 (Normal) (Cover error) (Fan error) (Lamp error) 04 00 05 00 06 00 07 00 (Temp error) (Air flow error) (Lamp time error) (Cool error) 08 00 09 00 10 00 (Filter error) (Filter missing error) (Inner Sencer error)
BRIGHTNESS Get BE EF 03 06 00 89 D2 02 00 03 20 00 00Increment BE EF 03 06 00 EF D2 04 00 03 20 00 00Decrement BE EF 03 06 00 3E D3 05 00 03 20 00 00
BRIGHTNESS Reset Execute BE EF 03 06 00 58 D3 06 00 00 70 00 00CONTRAST Get BE EF 03 06 00 FD D3 02 00 04 20 00 00
Increment BE EF 03 06 00 9B D3 04 00 04 20 00 00Decrement BE EF 03 06 00 4A D2 05 00 04 20 00 00
CONTRAST Reset Execute BE EF 03 06 00 A4 D2 06 00 01 70 00 00MODE Set NORMAL BE EF 03 06 00 23 F6 01 00 BA 30 00 00
CINEMA BE EF 03 06 00 B3 F7 01 00 BA 30 01 00DYNAMIC BE EF 03 06 00 E3 F4 01 00 BA 30 04 00Get BE EF 03 06 00 10 F6 02 00 BA 30 00 00
(Example return) 00 00 01 00 04 00 10 00 (Normal) (Cinema) (Dynamic) (Custom)
GAMMA Set #1 DEFAULT BE EF 03 06 00 07 E9 01 00 A1 30 20 00#1 CUSTOM BE EF 03 06 00 07 FD 01 00 A1 30 10 00#2 DEFAULT BE EF 03 06 00 97 E8 01 00 A1 30 21 00#2 CUSTOM BE EF 03 06 00 97 FC 01 00 A1 30 11 00#3 DEFAULT BE EF 03 06 00 67 E8 01 00 A1 30 22 00#3 CUSTOM BE EF 03 06 00 67 FC 01 00 A1 30 12 00
Get BE EF 03 06 00 F4 F0 02 00 A1 30 00 00
0B 00(Air speed sensor error)
53
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
User Gamma Pattern Set Off BE EF 03 06 00 FB FA 01 00 80 30 00 009 step gray scale BE EF 03 06 00 6B FB 01 00 80 30 01 00
15 steps gray scale BE EF 03 06 00 9B FB 01 00 80 30 02 00Ramp BE EF 03 06 00 0B FA 01 00 80 30 03 00
Get BE EF 03 06 00 C8 FA 02 00 80 30 00 00User Gamma Point 1 Get BE EF 03 06 00 08 FE 02 00 90 30 00 00
Increment BE EF 03 06 00 6E FE 04 00 90 30 00 00Decrement BE EF 03 06 00 BF FF 05 00 90 30 00 00
User Gamma Point 2 Get BE EF 03 06 00 F4 FF 02 00 91 30 00 00Increment BE EF 03 06 00 92 FF 04 00 91 30 00 00Decrement BE EF 03 06 00 43 FE 05 00 91 30 00 00
User Gamma Point 3 Get BE EF 03 06 00 B0 FF 02 00 92 30 00 00Increment BE EF 03 06 00 D6 FF 04 00 92 30 00 00Decrement BE EF 03 06 00 07 FE 05 00 92 30 00 00
User Gamma Point 4 Get BE EF 03 06 00 4C FE 02 00 93 30 00 00Increment BE EF 03 06 00 2A FE 04 00 93 30 00 00Decrement BE EF 03 06 00 FB FF 05 00 93 30 00 00
User Gamma Point 5 Get BE EF 03 06 00 38 FF 02 00 94 30 00 00Increment BE EF 03 06 00 5E FF 04 00 94 30 00 00Decrement BE EF 03 06 00 8F FE 05 00 94 30 00 00
User Gamma Point 6 Get BE EF 03 06 00 C4 FE 02 00 95 30 00 00Increment BE EF 03 06 00 A2 FE 04 00 95 30 00 00Decrement BE EF 03 06 00 73 FF 05 00 95 30 00 00
User Gamma Point 7 Get BE EF 03 06 00 80 FE 02 00 96 30 00 00Increment BE EF 03 06 00 E6 FE 04 00 96 30 00 00Decrement BE EF 03 06 00 37 FF 05 00 96 30 00 00
User Gamma Point 8 Get BE EF 03 06 00 7C FF 02 00 97 30 00 00Increment BE EF 03 06 00 1A FF 04 00 97 30 00 00Decrement BE EF 03 06 00 CB FE 05 00 97 30 00 00
COLOR TEMP Set LOW BE EF 03 06 00 6B F4 01 00 B0 30 01 00MIDDLE BE EF 03 06 00 9B F4 01 00 B0 30 02 00
HIGH BE EF 03 06 00 0B F5 01 00 B0 30 03 00CUSTOM BE EF 03 06 00 3B F8 01 00 B0 30 10 00Get BE EF 03 06 00 C8 F5 02 00 B0 30 00 00
COLOR TEMP GAIN R Get BE EF 03 06 00 34 F4 02 00 B1 30 00 00Increment BE EF 03 06 00 52 F4 04 00 B1 30 00 00Decrement BE EF 03 06 00 83 F5 05 00 B1 30 00 00
54
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
COLOR TEMP GAIN G Get BE EF 03 06 00 70 F4 02 00 B2 30 00 00Increment BE EF 03 06 00 16 F4 04 00 B2 30 00 00Decrement BE EF 03 06 00 C7 F5 05 00 B2 30 00 00
COLOR TEMP GAIN B Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00Increment BE EF 03 06 00 EA F5 04 00 B3 30 00 00Decrement BE EF 03 06 00 3B F4 05 00 B3 30 00 00
COLOR TEMP OFFSET R
Get BE EF 03 06 00 04 F5 02 00 B5 30 00 00Increment BE EF 03 06 00 62 F5 04 00 B5 30 00 00Decrement BE EF 03 06 00 B3 F4 05 00 B5 30 00 00
COLOR TEMP OFFSET G
Get BE EF 03 06 00 40 F5 02 00 B6 30 00 00Increment BE EF 03 06 00 26 F5 04 00 B6 30 00 00Decrement BE EF 03 06 00 F7 F4 05 00 B6 30 00 00
COLOR TEMP OFFSET B
Get BE EF 03 06 00 BC F4 02 00 B7 30 00 00Increment BE EF 03 06 00 DA F4 04 00 B7 30 00 00Decrement BE EF 03 06 00 0B F5 05 00 B7 30 00 00
COLOR Get BE EF 03 06 00 B5 72 02 00 02 22 00 00Increment BE EF 03 06 00 D3 72 04 00 02 22 00 00Decrement BE EF 03 06 00 02 73 05 00 02 22 00 00
COLOR Reset Execute BE EF 03 06 00 80 D0 06 00 0A 70 00 00TINT Get BE EF 03 06 00 49 73 02 00 03 22 00 00
Increment BE EF 03 06 00 2F 73 04 00 03 22 00 00Decrement BE EF 03 06 00 FE 72 05 00 03 22 00 00
TINT Reset Execute BE EF 03 06 00 7C D1 06 00 0B 70 00 00SHARPNESS Get BE EF 03 06 00 F1 72 02 00 01 22 00 00
Increment BE EF 03 06 00 97 72 04 00 01 22 00 00Decrement BE EF 03 06 00 46 73 05 00 01 22 00 00
SHARPNESS Reset Execute BE EF 03 06 00 C4 D0 06 00 09 70 00 00PROGRESSIVE Set TURN OFF BE EF 03 06 00 4A 72 01 00 07 22 00 00
TV BE EF 03 06 00 DA 73 01 00 07 22 01 00FILM BE EF 03 06 00 2A 73 01 00 07 22 02 00
Get BE EF 03 06 00 79 72 02 00 07 22 00 00MY MEMORY Load Set 1 BE EF 03 06 00 0E D7 01 00 14 20 00 00
2 BE EF 03 06 00 9E D6 01 00 14 20 01 003 BE EF 03 06 00 6E D6 01 00 14 20 02 004 BE EF 03 06 00 FE D7 01 00 14 20 03 00
MY MEMORY Save Set 1 BE EF 03 06 00 F2 D6 01 00 15 20 00 002 BE EF 03 06 00 62 D7 01 00 15 20 01 003 BE EF 03 06 00 92 D7 01 00 15 20 02 004 BE EF 03 06 00 02 D6 01 00 15 20 03 00
55
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
ASPECT Set 4:3 BE EF 03 06 00 9E D0 01 00 08 20 00 0016:9 BE EF 03 06 00 0E D1 01 00 08 20 01 00
SMALL BE EF 03 06 00 FE D1 01 00 08 20 02 00NORMAL BE EF 03 06 00 5E DD 01 00 08 20 10 00Get BE EF 03 06 00 AD D0 02 00 08 20 00 00
OVER SCAN Get BE EF 03 06 00 91 70 02 00 09 22 00 00Increment BE EF 03 06 00 F7 70 04 00 09 22 00 00Decrement BE EF 03 06 00 26 71 05 00 09 22 00 00
OVER SCAN Reset Execute BE EF 03 06 00 EC D9 06 00 27 70 00 00V POSITION Get BE EF 03 06 00 0D 83 02 00 00 21 00 00
Increment BE EF 03 06 00 6B 83 04 00 00 21 00 00Decrement BE EF 03 06 00 BA 82 05 00 00 21 00 00
V POSITION Reset Execute BE EF 03 06 00 E0 D2 06 00 02 70 00 00H POSITION Get BE EF 03 06 00 F1 82 02 00 01 21 00 00
Increment BE EF 03 06 00 97 82 04 00 01 21 00 00Decrement BE EF 03 06 00 46 83 05 00 01 21 00 00
H POSITION Reset Execute BE EF 03 06 00 1C D3 06 00 03 70 00 00H PHASE Get BE EF 03 06 00 49 83 02 00 03 21 00 00
Increment BE EF 03 06 00 2F 83 04 00 03 21 00 00Decrement BE EF 03 06 00 FE 82 05 00 03 21 00 00
H SIZE Get BE EF 03 06 00 B5 82 02 00 02 21 00 00Increment BE EF 03 06 00 D3 82 04 00 02 21 00 00Decrement BE EF 03 06 00 02 83 05 00 02 21 00 00
H SIZE Reset Execute BE EF 03 06 00 68 D2 06 00 04 70 00 00AUTO ADJUST Execute BE EF 03 06 00 91 D0 06 00 0A 20 00 00COLOR SPACE Set AUTO BE EF 03 06 00 0E 72 01 00 04 22 00 00
RGB BE EF 03 06 00 9E 73 01 00 04 22 01 00SMPTE240 BE EF 03 06 00 6E 73 01 00 04 22 02 00
REC709 BE EF 03 06 00 FE 72 01 00 04 22 03 00REC601 BE EF 03 06 00 CE 70 01 00 04 22 04 00Get BE EF 03 06 00 3D 72 02 00 04 22 00 00
COMPONENT Set COMPONENT BE EF 03 06 00 4A D7 01 00 17 20 00 00SCART RGB BE EF 03 06 00 DA D6 01 00 17 20 01 00
Get BE EF 03 06 00 79 D7 02 00 17 20 00 00VIDEO FORMAT Set AUTO BE EF 03 06 00 9E 75 01 00 00 22 0A 00
NTSC BE EF 03 06 00 FE 71 01 00 00 22 04 00PAL BE EF 03 06 00 6E 70 01 00 00 22 05 00
SECAM BE EF 03 06 00 6E 75 01 00 00 22 09 00NTSC4.43 BE EF 03 06 00 5E 72 01 00 00 22 02 00
M-PAL BE EF 03 06 00 FE 74 01 00 00 22 08 00N-PAL BE EF 03 06 00 0E 71 01 00 00 22 07 00
Get BE EF 03 06 00 0D 73 02 00 00 22 00 00FRAME LOCK Set TURN OFF BE EF 03 06 00 CB D6 01 00 14 30 00 00
TURN ON BE EF 03 06 00 5B D7 01 00 14 30 01 00Get BE EF 03 06 00 F8 D6 02 00 14 30 00 00
56
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
KEYSTONE V Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00Decrement BE EF 03 06 00 0E D2 05 00 07 20 00 00
KEYSTONE V Reset Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00WHISPER Set NORMAL BE EF 03 06 00 3B 23 01 00 00 33 00 00
WHISPER BE EF 03 06 00 AB 22 01 00 00 33 01 00Get BE EF 03 06 00 08 23 02 00 00 33 00 00
MIRROR Set NORMAL BE EF 03 06 00 C7 D2 01 00 01 30 00 00H:INVERT BE EF 03 06 00 57 D3 01 00 01 30 01 00V:INVERT BE EF 03 06 00 A7 D3 01 00 01 30 02 00
H&V:INVERT BE EF 03 06 00 37 D2 01 00 01 30 03 00Get BE EF 03 06 00 F4 D2 02 00 01 30 00 00
VOLUME Get BE EF 03 06 00 31 D3 02 00 01 20 00 00Increment BE EF 03 06 00 57 D3 04 00 01 20 00 00Decrement BE EF 03 06 00 86 D2 05 00 01 20 00 00
AUDIO - RGB1 Set TURN OFF BE EF 03 06 00 FE DD 01 00 30 20 00 00Audio1 BE EF 03 06 00 6E DC 01 00 30 20 01 00Audio2 BE EF 03 06 00 9E DC 01 00 30 20 02 00
Get BE EF 03 06 00 CD DD 02 00 30 20 00 00AUDIO - RGB2 Set TURN OFF BE EF 03 06 00 CE DC 01 00 34 20 00 00
Audio1 BE EF 03 06 00 5E DD 01 00 34 20 01 00Audio2 BE EF 03 06 00 AE DD 01 00 34 20 02 00
Get BE EF 03 06 00 FD DC 02 00 34 20 00 00AUDIO - Video Set TURN OFF BE EF 03 06 00 02 DC 01 00 31 20 00 00
Audio1 BE EF 03 06 00 92 DD 01 00 31 20 01 00Audio2 BE EF 03 06 00 62 DD 01 00 31 20 02 00
Get BE EF 03 06 00 31 DC 02 00 31 20 00 00AUDIO - S-Video Set TURN OFF BE EF 03 06 00 46 DC 01 00 32 20 00 00
Audio1 BE EF 03 06 00 D6 DD 01 00 32 20 01 00Audio2 BE EF 03 06 00 26 DD 01 00 32 20 02 00
Get BE EF 03 06 00 75 DC 02 00 32 20 00 00AUDIO - Component Set TURN OFF BE EF 03 06 00 32 DD 01 00 35 20 00 00
Audio1 BE EF 03 06 00 A2 DC 01 00 35 20 01 00Audio2 BE EF 03 06 00 52 DC 01 00 35 20 02 00
Get BE EF 03 06 00 01 DD 02 00 35 20 00 00
57
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
MUTE Set TURN OFF BE EF 03 06 00 46 D3 01 00 02 20 00 00TURN ON BE EF 03 06 00 D6 D2 01 00 02 20 01 00Get BE EF 03 06 00 75 D3 02 00 02 20 00 00
LANGUAGE Set ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00DEUTSCH BE EF 03 06 00 97 D2 01 00 05 30 02 00ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00ITALIANO BE EF 03 06 00 37 D1 01 00 05 30 04 00NORSK BE EF 03 06 00 A7 D0 01 00 05 30 05 00
NEDERLANDS BE EF 03 06 00 57 D0 01 00 05 30 06 00PORTUGUÊS BE EF 03 06 00 C7 D1 01 00 05 30 07 00
BE EF 03 06 00 37 D4 01 00 05 30 08 00BE EF 03 06 00 A7 D5 01 00 05 30 09 00BE EF 03 06 00 37 DE 01 00 05 30 10 00BE EF 03 06 00 57 D5 01 00 05 30 0A 00
SVENSKA BE EF 03 06 00 C7 D4 01 00 05 30 0B 00PУCCKИЙ BE EF 03 06 00 F7 D6 01 00 05 30 0C 00
SUOMI BE EF 03 06 00 67 D7 01 00 05 30 0D 00POLSKI BE EF 03 06 00 97 D7 01 00 05 30 0E 00TÜRKÇE BE EF 03 06 00 07 D6 01 00 05 30 0F 00Get BE EF 03 06 00 C4 D3 02 00 05 30 00 00
MENU POSITION H Get BE EF 03 06 00 04 D7 02 00 15 30 00 00Increment BE EF 03 06 00 62 D7 04 00 15 30 00 00Decrement BE EF 03 06 00 B3 D6 05 00 15 30 00 00
MENU POSITION H Reset
Execute BE EF 03 06 00 DC C6 06 00 43 70 00 00
MENU POSITION V Get BE EF 03 06 00 40 D7 02 00 16 30 00 00Increment BE EF 03 06 00 26 D7 04 00 16 30 00 00Decrement BE EF 03 06 00 F7 D6 05 00 16 30 00 00
MENU POSITION V Reset
Execute BE EF 03 06 00 A8 C7 06 00 44 70 00 00
58
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
Names Operation Type HeaderCommand Data
CRC Action Type Setting Code
OSD BRIGHT. Get BE EF 03 06 00 A8 D5 02 00 18 30 00 00Increment BE EF 03 06 00 CE D5 04 00 18 30 00 00Decrement BE EF 03 06 00 1F D4 05 00 18 30 00 00
BLANK Set My Screen BE EF 03 06 00 FB CA 01 00 00 30 20 00ORIGINAL BE EF 03 06 00 FB E2 01 00 00 30 40 00
BLUE BE EF 03 06 00 CB D3 01 00 00 30 03 00WHITE BE EF 03 06 00 6B D0 01 00 00 30 05 00BLACK BE EF 03 06 00 9B D0 01 00 00 30 06 00
Get BE EF 03 06 00 08 D3 02 00 00 30 00 00BLANK On/Off Set TURN OFF BE EF 03 06 00 FB D8 01 00 20 30 00 00
TURN ON BE EF 03 06 00 6B D9 01 00 20 30 01 00Get BE EF 03 06 00 C8 D8 02 00 20 30 00 00
START UP Set My Screen BE EF 03 06 00 CB CB 01 00 04 30 20 00ORIGINAL BE EF 03 06 00 0B D2 01 00 04 30 00 00TURN OFF BE EF 03 06 00 9B D3 01 00 04 30 01 00Get BE EF 03 06 00 38 D2 02 00 04 30 00 00
My Screen LOCK Set TURN OFF BE EF 03 06 00 3B EF 01 00 C0 30 00 00TURN ON BE EF 03 06 00 AB EE 01 00 C0 30 01 00Get BE EF 03 06 00 08 EF 02 00 C0 30 00 00
Message Set TURN OFF BE EF 03 06 00 8F D6 01 00 17 30 00 00TURN ON BE EF 03 06 00 1F D7 01 00 17 30 01 00Get BE EF 03 06 00 BC D6 02 00 17 30 00 00
AUTO SEARCH Set TURN OFF BE EF 03 06 00 B6 D6 01 00 16 20 00 00TURN ON BE EF 03 06 00 26 D7 01 00 16 20 01 00Get BE EF 03 06 00 85 D6 02 00 16 20 00 00
AUTO POWER OFF Get BE EF 03 06 00 08 86 02 00 10 31 00 00Increment BE EF 03 06 00 6E 86 04 00 10 31 00 00Decrement BE EF 03 06 00 BF 87 05 00 10 31 00 00
LAMP TIME Get BE EF 03 06 00 C2 FF 02 00 90 10 00 00LAMP TIME Reset Execute BE EF 03 06 00 58 DC 06 00 30 70 00 00
FILTER TIME Get BE EF 03 06 00 C2 F0 02 00 A0 10 00 00FILER TIME Reset Execute BE EF 03 06 00 98 C6 06 00 40 70 00 00
MAGNIFY Get BE EF 03 06 00 7C D2 02 00 07 30 00 00Increment BE EF 03 06 00 1A D2 04 00 07 30 00 00Decrement BE EF 03 06 00 CB D3 05 00 07 30 00 00
FREEZE Set NORMAL BE EF 03 06 00 83 D2 01 00 02 30 00 00FREEZE BE EF 03 06 00 13 D3 01 00 02 30 01 00Get BE EF 03 06 00 B0 D2 02 00 02 30 00 00
59
CP
-S245(C
C9S
MN
)/CP
-X255/ED
-X8255(C
C9X
MN
)
11. Block diagram
Block diagram
POWER UNIT(CIRCUIT)
POWER UNIT(BALLAST)
MAIN PWB
ACINPUT
OPTICALUNIT
Lamp
ROTSIMREHT
REMOTE PWB
maL p occoris
PMA_OIDUAW1
CADP/S
S .daerpS/lat'X
243SCI
ROSSECORP_egamIUPC NIAM
V50-/V01-A861WP
S H
00160E3L
KLCM
LORTNOCNOTTUB
PMETLORTNOC FAN
PROJECTIONLENS
KLCD
0.6"XGA/SVGALCD PANEL
GR occoris lenaP
LLP_ts1
D/A
PMALC
,D/A
1047VDA
CDD
Video in
ComponentVideo
PMA Bd6
RGB in2/out
RGB in1
S-Video in
CTRL C232-SR
Restart SW
Audio_in2
Speaker(1W)
WS
L RAudio_in2
Audio out
tnoC .loVWS htiw
RIREVIECER
FANFAN
Lamp DoorSW
tsuahxE
ROLOC,YTIMROFINU
GNIMIT,ROTARENEG
AMMAGNOITCERROC
07070E3L
USB
edisni
edistuo)tcudnaf(
edistuo)tinu rewop(
WST
esuoMetomeRBSU
3
B occoris lenaP
PMA Bd6
IN/OUT SWWS
FAN
MOR hsalFtibM61
MARS tibM2K46
MORPEE
NOINAPMOC
PIHC 0877ETEther
UPC_CIN
0257SN
YHP
4981SCI
MOR hsalFtibM23
MARDS tibM46
NETWORK PWB
remiT
ROTSIMREHT ROTSIMREHT
BATTERY PWB
V3.3yrettab
59a
PJ
65
6(C
C9
XM
)
11. Block diagram
Block diagram
60
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)
12. Connector connection diagrams
Connector connection diagram
60a
PJ656(CC9XM)
Connector connection diagram
61
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
13. Basic circuit diagram Parts with hatching are not mounted.
PWB assembly REMOTE (CC9SMN/CC9XMN/CC9XM)
PWB assembly BATTERY (CC9SMN/CC9XMN)
6
5
4
3
2
1
6
5
4
3
2
1
EDCBA
62
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)/PJ656(CC9XM)
MEMO
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
POWER UNIT (BALLAST) 1 (CC9SMN/CC9XMN/CC9XM)For handling of the circuit diagram, refer to the warning on the cover.
Warning
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
POWER UNIT (BALLAST) 2 (CC9SMN/CC9XMN/CC9XM)For handling of the circuit diagram, refer to the warning on the cover.
Warning
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
POWER UNIT (CIRCUIT) (CC9SMN/CC9XMN/CC9XM)For handling of the circuit diagram, refer to the warning on the cover.
Warning
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 1 (CC9SMN/CC9XMN/CC9XM)
4 5
3 2 1
A9
B9
A10 A11
D10
C14
A18
C9
A15
D14
C15
C16
C17
E17
C18
A12
B13
C12
A13
B14
A17
B16
D2
B10
C10
C2
E4
C3
F4
B1
C1
D3
B8
C11
B12
A8
B11
B18
C8
A7
B7
A16
A20
B17
A19
C13
A4
B15
B6
A14
B19
C6
E16
B5
D7
A5
C7
A6
E3
N2
E1
M2
M1
M3
G1
D1
F3
G2
E2
F1
G3
F2
H3
H2
J1
J4
H1
J2
J3
L2
K3
K2
K1
N1
L1
L3
L4
V4
W3
U7
D6
E5
Y11 U4
T4
V3
U3
Y1
U2
W1
R4
V1
P4
R3
T2
U1
V10
Y9
Y10
V14
Y4
C19
W10
U10
B20
W12
V5
W4
W5
Y5
W8
Y3
V16
U6
Y8
V6
Y6
W6
V7
U8
W7
V8
U15
P2
T5
N4
T18
V9
W9
R1
W13
P3
R2
T1
V2
T3
W2
C5
A3
W11
Y12
V12
V11
V13
Y13
V15
Y14
W14
W15
Y15
Y18
R17
V18
W18
T17
U18
Y19
W19
N3
Y2
U17
U16
M4
P1
Y17
W17
V17
Y16
W16
M5
M16
R6
R7
R8
T8
E7
E9
E10
E11
E12
F16
H5
H16
J5
K5
K16
L5
N5
P15
R13
P16
L16
J16
G16
G15
F15
E6
G5
G6
F14
F5
F6
E8
F7
T16
U5
U9
U11
U13
T7
A2
C4
K9
B4
T6
T15
T14
T13
T12
T11
T10
T9
U12
R5
P17
N18
N12
N11
N10
N9
N8
M13
M12
M11
M10
K4
J13
R15
U14
Y7
R14
N16
D15
P6
P5
N15
N6
E15
E14
E13B3
B2
A1
D11
D4
D5
D9
D8
D12
D13
G4
H10
G17
H4
H9
H8
J9
H11
H12
J8
H13
K8
J10
J11
J12
L18
L12
M8
K13
M9
N13
L13
L11
N17
L10
L9
L8
K12
K11
K10
G18
H20
J20
J17
C20
D18
N19
U19
R18
W20
V20
U20
T19
T20
P20
M17
D17
D16
D19
E18
F20
F17
D20
E19
F18
F19
E20
H18
H17
G20
G19
M19
H19
J19
J18
L17
K18
K20
K19
L20
L19
K17
M20
N20
M18
P19
P18
R20
R19
R16
Y20
V19
5
6
7
8
4
3
2
1
A20
C2E2
10050.01/16
1 2
C249
10050.01/16
1 2
C248
10050.01/16
1 2
C244
10050.01/16
1 2
C212
10050.01/16
1 2
C202
10050.01/16
1 2C203
10050.01/16
1 2C204
10050.01/16
1 2
C206
10050.01/16
1 2
C205
10050.01/16
1 2
C2C1
10050.01/16
1 2
C207
10050.01/16
1 2
2F
2C
52
12
3.
6/
01
12
3F
2C
3.
6/
0.
1
12
C209
10050.01/16
1 2
C208
10050.01/16
1 2
C210
10050.01/16
1 2
C238
10050.01/16
1 2
C211
10050.01/16
1 2
C213
10050.01/16
1 2C214
10050.01/16
1 2
C2A5
10050.01/16
1 2
C2A2
10050.01/16
1 2
C2A4
10050.01/16
1 2
C2A3
10050.01/16
1 2
C2A1
10050.01/16
1 2
C241
10050.01/16
1 2
C230
10050.01/16
1 2
C243
10050.01/16
1 2
C242
10050.01/16
1 2
C239
10050.01/16
1 2
C20122/6.3MVK/SKV
12
C23722/6.3MVK/SKV
12
C24722/6.3MVK/SKV
12 50
2I
CS
C5
21
11
KT tn
oc
V
DN
G
tu
oV
pN
ni
V
3216
L202C1V222-2A
123
GND1
GND1
GND1
GND1
GND1
GND1
1608
L201600 H1 2
1608
L208600 H1 2
CHVVS1
CHBHE1
CHH191
CHGVS1
CHPM2 1
CHGHS1
CHG181
CHD161
CHH201
CHJ181
CHRST 1
CHWR1
CHDT1 1
CHLPR 1
CHK181
CHH171
CHF201CHRAO1
CHGHF1CHRXD 1
CHA22 1
CHGFB1
CHG191
CHDEN1
CHRAW1
CHTXD 1
CHA23 1
CHGRF1
CHF191
CHVPN1
CHDC11
CHCS01
CHIR 1
CHLCT 1
CHGBS1
CHE201
CHDC31
CHCS11
CHTMP 1
CHRSP 1
CHD201
CHVFD1
CHH181
CHSDR 1
CHROO1
CHDCK 1
CHA20 1
CHD191
CHNMI 1
CHGPN1
CHROW1
CHMCK 1
CHA21 1
CHGSG1
CHLPG 1
CHVCK1
CHCK1 1
CHD171
CHJ191
CHXI 1
CHJ201
CHCST 1
CHF171
CHE191
CHK201
CHCSD 1
CHSCL 1
CHXO 1
CHG201
CHK191
CHE181
CHSDA 1
CHDC21
CHF181
CHGCO1
CHPM1 1
CHVHS1
CHGCK1
CHRD1
1005
R2C4561 2
1005
R226331 2
1005
R2321001 2
0
1005
R22201 2
1005
R2E7
331 2
0
1005
R2C301 2
10K1005
R2F610K1 2
0
1005
R20101 2
100
1005
R2191001 2
100
1005
R2201001 2
100
1005
R2C51001 2
1005
R233
1001 2
0
1005
R2E9 01 2
0
1005
R2E8 01 2
50
01
1H
2R
K7
.4
12
100
1005
R2C61001 2
1005
R206 01 2
33
1005
R225331 2
100
1005
R2281001 2
1005
R2F7
33
1 2
0
1005
R22301 2
1005
R2454.7K1 2
0
1005
R2A001 2
10K
1005
R23910K1 2
10K1005
R24110K1 2
10K
1005
R24210K1 2
10K
1005
R24410K1 2
10K1005
R2C1
10K1 2
1005
R21810K
1 2
R237
2010
10K
1 2
3 4
5 6
7 8
R248
2010
33
1 2
3 4
5 6
7 8
R249
201033
7 8
5 6
3 4
1 2
R247
201033
1 2
3 4
5 6
7 8
R2A1
201033
1 2
3 4
5 6
7 8
R2A7
2010100
7 8
5 6
3 4
1 2
R2A2
201033
1 2
3 4
5 6
7 8
R2A3
201033
1 2
3 4
5 6
7 8
R2E6
2010
33
1 2
3 4
5 6
7 8
R2A4
201033
1 2
3 4
5 6
7 8
R2A5
201033
1 2
3 4
5 6
7 8
R2A6
201033
1 2
3 4
5 6
7 8
R227
2010
100
7 8
5 6
3 4
1 2
R2A8
2010100
7 8
5 6
3 4
1 2
R229
2010
100
1 2
3 4
5 6
7 8
R2F1
2010
10K
1 2
3 4
5 6
7 8
DCLK
GVS
GCLK
LSR_CS
I2CCLK
DVS
LCONT_IN
RAMWE
RDN
CS_TG
EXTINT
I2CDAT
NMI
DHS
CS_DAC
GHS
TXD
+1.5V
EMU-RESET
RESETP
DATA1
CLK1
LAMP_ON
ROMWE
RAMOE
LSG_CS
WRN
ROMOE
BHEN
+3.3V
LSB_CS
CPU-RESET
PWRC
RXD
TEA1
TEA2
TEA3
TEA4
TEA5
TERDN
TEWRN
GRE3
GRE2
GRE0
GRE4
GRE1
GRE7
GRE5
GRE6
GGE4
GGE3
GGE1
GGE6
GGE7
GGE2
GGE5
GGE0
GBE4
GBE3
GBE1
GBE6
GBE7
GBE2
GBE5
GBE0
CHRO01
CHRO11
CHRO21
CHRO31
CHRO41
CHRO51
CHRO61
CHRO71
CHGO71
CHGO41
CHGO01
CHGO61
CHGO11
CHGO31
CHGO51
CHGO21
CHBO71
CHBO41
CHBO01
CHBO61
CHBO11
CHBO31
CHBO51
CHBO21
CHVG71
CHVG21
CHVG11
CHVG41
CHVG01
CHVG31
CHVG51
CHVG61
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A15
A10
A16
A11
A13
A14
A12
A17
A18
A19
D5
D0
D11
D13
D12
D6
D10
D1
D3
D4
D15
D2
D14
D7
D8
D9
DBE1
DRE0
DBE0
DGE1
DGE0
DRE1
DRE4
DRE3
DRE6
DRE5
DRE8
DRE7
DRE9
DRE2
DGE6
DGE8
DGE4
DGE5
DGE7
DGE9
DGE2
DGE3
DBE6
DBE8
DBE4
DBE5
DBE7
DBE9
DBE2
DBE3
NO-COVER
R209
201010K
12 4
3 56
78
IN_TEMP
R205
2010
33
1 2
3 4
5 6
7 8
GND1
R207
2010
33
1 2
3 4
5 6
7 8
1005
R2040
1 2LAMP-S
KEYI0
R208
2010
33
1 2
3 4
5 6
7 8
KEYI2
KEYI1
VFIELD
FG_SEL1
1005
R211
01 2
A20
10K
1005
R20210K1 2
10K
1005
R20310K1 2
CHB41
1005
R234
1001 2
1608
L205600 H1 2
C24022/6.3MVK/SKV
12
1608
L203600 H1 2
KEYO01
LED-TEMP1
KEYO11
98
2R
01
02
K0
1
124
356
78
VOL_SEL1
D253
SDS511
12
GND1
1
LED-LAMP1
D252SDS511
12
R281
201033
12
34
56
78
CHB31
1005
R21600
1 2
1005
R2170
1 2
1005
R2214.7K1 2
1005
R2244.7K1 2
1005
R2382.2K
1 2
1005
R2402.2K
1 2
1005
R2432.2K
1 2
1005
R24610K1 2
1005
R2C2100
12
50
01
9A
2R
K0
11
21
F2
C
52
12
3.
6/
01
12
4F
2C
3.
6/
0.
1
12
1005
R21010K
12
10
2D
11
5S
DS
12
CHRV1 1
1005
R288100 12
3C
2C
50
01
C-
p7
212
GND1
33
1005
R214331 2
1005
R215561 2
2C
2C
50
01
C-
p7
212
1608
L209600 H1 2
CH/PDTS1
X20127.000MHzSMD-49
1 2
50
01
2H
2R0
12
50
01
3H
2R
02
21
2
1005R2H4 1.0M1 2
9C
2C
50
01
61
/1
0.
01
2
I201PW168A-10VL
A10GCLK
B9GPEN
A9GVS
C10GHS
B10GSOG
E4GRE0
C3GRE1
B1GRE2
F4GRE3
C2GRE4
C1GRE5
D3GRE6
D2GRE7
C11GGE0
B12GGE1
B11GGE2
A8GGE3
B8GGE4
C8GGE5
A7GGE6
B7GGE7
B18GBE0
A20GBE1
B17GBE2
A19GBE3
B16GBE4
A17GBE5
A16GBE6
A15GBE7
A6GRO0
C7GRO1
B6GRO2
A5GRO3
D7GRO4
B5GRO5
C6GRO6
A4GRO7
C13GGO0
B15GGO1
A14GGO2
B14GGO3
A13GGO4
C12GGO5
B13GGO6
A12GGO7
C18GBO0
E17GBO1
C17GBO2
B19GBO3
E16GBO4
C16GBO5
C15GBO6
D14GBO7
C9GHSFOUT
A18GCOAST
C14GBLKSPL
D10GREF
A11GFBK
I201PW168A-10VL
E1VCLK
N2VPEN
E3VVS
F3VHS
D1FIELD
E2VR0
F1VR1
F2VR2
G3VR3
G2VR4
H3VR5
H2VR6
G1VR7
J4VG0
H1VG1
J3VG2
J2VG3
J1VG4
K3VG5
K2VG6
K1VG7
L2VB0
L1VB1
L3VB2
L4VB3
M3VB4
M1VB5
N1VB6
M2VB7
I201PW168A-10VL
Y11RESET
E5MCKEXT
D6DCKEXT
A3XI
C5XO
Y12RXD
V12TXD
V11IRRCVR0
W11IRRCVR1
V13PORTA0
W13PORTA1
Y13PORTA2
Y14PORTA3
W14PORTA4
Y15PORTA5
W15PORTA6
V15PORTA7
R17PORTB0
W18PORTB1
V18PORTB2
Y18PORTB3
U18PORTB4
Y19PORTB5
W19PORTB6
T18PORTB7
T17PORTC0
V16PORTC1
W16PORTC2
Y16PORTC3
V17PORTC4
U17PORTC5
W17PORTC6
Y17PORTC7
P1CPUTMS
Y2CPUTCK
M4CPUTDI
N3CPUTDO
U16MODE0
N4MODE1
T5MODE2
P2MODE3
U15ADR24B
V14DNC3
C19DNC2
B20DNC1
W10NMI
U10EXTINT
Y4CS1
V4CS0
Y5RAMWE
W5RAMOE
W4ROMWE
V5ROMOE
W12BHEN
Y3WR
W3RD
U6D15
U7D14
V6D13
Y6D12
W6D11
V7D10
U8D9
W7D8
V8D7
W8D6
Y8D5
V9D4
W9D3
Y9D2
Y10D1
V10D0
P3A19
R1A18
R2A17
T1A16
U1A15
T2A14
R3A13
P4A12
V1A11
R4A10
W1A9
U2A8
V2A7
T3A6
W2A5
Y1A4
U3A3
V3A2
T4A1
U4A0
I201PW168A-10VL
A1GND1
B2GND2
B3GND3
D4GND4
D5GND5
D8GND6
D9GND7
D11GND8
D12GND9
D13GND10
D15GND11
G4GND12
G17GND13
H4GND14
H8GND15
H9GND16
H10GND17
H11GND18
H12GND19
H13GND20
J8GND21
J9GND22
J10GND23
J11GND24
J12GND25
J13GND26
K4GND27
K8GND28
K9GND29
K10GND30
K11GND31
K12GND32
K13GND33
L8GND34
L9GND35
L10GND36
L11GND37
L12GND38
L13GND39
L18GND40
M8GND41
M9GND42
M10GND43
M11GND44
M12GND45
M13GND46
N8GND47
N9GND48
N10GND49
N11GND50
N12GND51
N13GND52
N17GND53
N18GND54
P17GND55
R5GND56
U12GND57
U14GND58
Y7GND59
T8VIO19
R8VIO18
R7VIO17
R6VIO16
M16VIO15
M5VIO14
L16VIO13
J16VIO12
G16VIO11
G15VIO10
G6VIO9
G5VIO8
F15VIO7
F14VIO6
F7VIO5
F6VIO4
F5VIO3
E8VIO2
E6VIO1
U13VCC6
U11VCC5
U9VCC4
U5VCC3
T16VCC2
A2VCC1
C4VPP2
B4VPP1
T15VDD35
T14VDD34
T13VDD33
T12VDD32
T11VDD31
T10VDD30
T9VDD29
T7VDD28
T6VDD27
R15VDD26
R14VDD25
R13VDD24
P16VDD23
P15VDD22
P6VDD21
P5VDD20
N16VDD19
N15VDD18
N6VDD17
N5VDD16
L5VDD15
K16VDD14
K5VDD13
J5VDD12
H16VDD11
H5VDD10
F16VDD9
E15VDD8
E14VDD7
E13VDD6
E12VDD5
E11VDD4
E10VDD3
E9VDD2
E7VDD1
I201PW168A-10VL
J17DCLK
C20DVS
D18DHS
N19DEN
V19DRE0
Y20DRE1
R16DRE2
U19DRE3
R18DRE4
W20DRE5
V20DRE6
U20DRE7
T19DGE0
T20DGE1
R19DGE2
R20DGE3
M18DGE4
P18DGE5
P19DGE6
P20DGE7
M17DBE0
N20DBE1
M20DBE2
L17DBE3
M19DBE4
K17DBE5
L19DBE6
L20DBE7
K19DRO0
K20DRO1
K18DRO2
J20DRO3
J18DRO4
J19DRO5
H20DRO6
H19DRO7
H18DGO0
H17DGO1
G20DGO2
G19DGO3
G18DGO4
F20DGO5
F19DGO6
F18DGO7
E20DBO0
E19DBO1
E18DBO2
F17DBO3
D20DBO4
D19DBO5
D16DBO6
D17DBO7
05
2C
50
01
C-
p0
011
250
01
48
2R
K0
11
2
GND1
1005
R2F8100
1 2
1005
R2F9100
1 2
PCS00
1005
R2C001 2
FG_SEL2
LED-P-R
LED-P-G
FAN_FG
PCS1
MOUSE
I202ICS342-C9X
X1/ICLK
VDD
GND
CLK1 CLK2
SEL
PDTS
X2
ADRESET1005
R2120
1 2
1005
R213001 2
RGB2_IN/OUTCHB5
1
R2C7
2010150
1 2
3 4
5 6
7 8
R2C8
2010150
1 2
3 4
5 6
7 8
R2C9
2010150
1 2
3 4
5 6
7 8
R2E1
2010150
1 2
3 4
5 6
7 8
R2E2
2010150
1 2
3 4
5 6
7 8
R2E3
2010150
1 2
3 4
5 6
7 8
R236
2010150
1 2
3 4
5 6
7 8
1005
R2E51501501 21005
R2351501501 2
V5
.2
870mA
20mA
100mA
Port D
Port E
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 2 (CC9SMN/CC9XMN/CC9XM)
25
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
26
27
24
2322
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
26
27
2524
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
5
6
7
8
4
3
2
1
A16
A15
A14
A13
A12
A11
A10
A9
A19
A18
A8
A7
A6
A5
A4
A3
A2
A1
A17
D14
D12
D8
D11
D15
D13
D7
D6
D5
D4
D3
D10
D2
D9
D1
D0
A4
A6
A9
A11
A12
A14
A17
A19
A0
D7
D6
D13
D12
D11
D10
D1
D0
A20
A5
A3
A2
A1
A14
A15
A16
A17
A6
A7
A8
A9
A10
A11
A12
D0
D1
D2
D3
D4
D5
D6
D7 D8
D9
D10
D11
D12
D13
D14
D15
A18
A2 A1
A3
A5
A7
A8
A10
A13
A20
A15
A16
A18
D15
D14
D5
D4
D3
D2
D9
D8
A13
A0
A4
0A
1A
2A
3A
4A
5A
6A
7A
8A
9A
01
A
11
A
21
A
31
A
41
A
51
A
61
A
71
A
81
A
91
A
02
A
0D
1D
2D
3D
4D
5D
6D
7D
8D
9D
01
D
11
D
21
D
31
D
41
D
51
D
E251WR-60S-VF1-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30 31
32
33
34
35
36
37
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
38
C260
10050.01/16
1 2
C256
10050.01/16
1 2
95
2C
50
01
61
/1
0.
0
12
C261
10050.01/16
1 2
I252CY62136VLL-70ZI
A4
A2
A1
A0
CE
I/O0
I/O1
I/O2
I/O3
VCC-11
VSS-12
I/O4
I/O5
I/O6
I/O7
WE
A16
A15
A14
A13
A12 NC-23
A11
A10
A9
A8
NC-28
I/O8
I/O9
I/O10
I/O11
VCC-33
VSS-34
I/O12
I/O13
I/O14
I/O15
BLE
BHE
OE
A7
A6
A5
A3
I251M29W160ET-70N6
1 A15
2 A14
3 A13
4 A12
5 A11
6 A10
7 A9
8 A8
9 A19
10 NC-10
11 W
12 RP
13 NC-13
14 NC-14
15 RB
16 A18
17 A17
18 A7
19 A6
20 A5
21 A4
22 A3
23 A2
24 A1 25A0
E 26
VSS-27 27
G 28
DQ0 29
DQ8 30
DQ1 31
DQ9 32
DQ2 33
DQ10 34
DQ3 35
DQ11 36
VCC 37
DQ4 38
DQ12 39
DQ5 40
DQ13 41
DQ6 42
DQ14 43
DQ7 44
DQ15A-1 45
VSS-46 46
BYTE 47
A16 48
GND1
1
GND1
1
GND1
1
GND1
1
GND1
1
GND1
1
GND1
1
CHF_CE1
CHVCC1
CHGND1
CHWRN1
1005
R258
0
1 2
1005
R251
0
1 2
1005
R2590
1 2
50
01
46
2R
K7
.4
12
1005
R2570
1 2
1005
R25510K1 2
1005
R25401 2
1005
R2611001 2
1005
R2601001 2
50
01
26
2R
K7
.4
12
R2500
2010
1 2
3 4
5 6
7 8
ROMWE1
NMI1
RAMWE1
BHEN1
RDN1
PCS01
RAMOE1
ROMWE1
BHEN1
FLASH_CE1
PCS11
ROMOE1
ROMOE1
I2CDAT1
I2CCLK1
FLASH_CE1
CPU-RESET1
LCONT_IN1
+3.3V1
+5V1
RXD1
LAMP_ON
1
WRN1
EMU-RESET1
TXD1
0A
1
1A
1
3A
12
A1
5A
1
6A
1
7A
1
4A
1
21
A1
31
A1
51
A1
41
A1
9A
1
01
A1
11
A1
8A
1
02
A1
71
A1
81
A1
91
A1
61
A1
4D
1
5D
1
8D
1
21
D1
01
D1
7D
1
51
D1
6D
1
9D
1
1D
1
2D
1
3D
1
41
D1
11
D1
0D
1
31
D1
1608
L251600 H
1 2
50
01
76
2R00
12
1005
R268100
12
1005
R269100
12
R270
20103.3K
1 2
3 4
5 6
7 8
1005
R271
0
1 2
1005
R2780
1 2
1005
R279
0
1 2
1005
R2770
1 2
1005
R2660
1 2
1005
R25310K1 2
50
01
65
2R00
12
1005
R2520
1 2
50
01
36
2R
02
80
28
12
50
01
56
2R
02
80
28
12
I253M24C64-WMN6
E0
E1
E2
VSS SDA
SCL
WC
VCC
65mA
35mA
Am
03
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 3 (CC9SMN/CC9XMN/CC9XM)
4
5
3
2
1
4
5
3
2
1
4
5
3
2
1
42 32 22 12 02 91 81 71 61 51 41 31211101987654321
43
21
5
6
7
8
4
3
2
1
43
21
43
21
43
21
43
21
43
21
43
21
4
5
3
2
1
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
G2G1
TEMP_SEL1
TEMP_SEL2
TEMP_REF
TEMP_SEL3
77
3C
01
/3
3.
0
12
C352
0.1/25
1 2
92
3C
50
01
C-
p0
011
2
C351
212510/10
12
72
3C
50
01
C-
p0
011
2 82
3C
50
01
C-
p0
011
2
67
3C
50
01
61
/1
0.
0
12
C313
1005
0.01/16
12
35
3C
61
/1
.01
2
62
3C
50
01
C-
p0
011
2
55
3C
52
12
01
/0
1
12
C371
212510/10
12
32
3C
50
01
C-
p0
011
212
3C
50
01
C-
p0
011
2
C302
10050.01/16
12
71
3C
50
01
C-
p0
011
261
3C
50
01
C-
p0
011
222
3C
50
01
C-
p0
011
202
3C
50
01
C-
p0
011
2
52
3C
50
01
C-
p0
011
242
3C
50
01
C-
p0
011
2
C312
1005
0.01/16
12
C301
10050.01/16
12
D310SDS142WKF
12
3
D311SDS142WKF
12
3
I310SN74LVC1G126DCK
OE
A
GND Y
Vcc
I311SN74LVC1G126DCK
OE
A
GND Y
Vcc
I301RN5VD26C
OUT
VDD
GND NC
Cd
50
3I
DA
06
-P
G6
73
26
M
1A
2A
3A
4A
5A
/1
1D
6A
/0
1D
7A
/9
D
8A
/8
D
9A
/7
D
01
A/
6D
11
A/
5D
DD
V2
1A
/4
D
cc
V
3D
2D
1D
0D
KL
C
IS
0S
NE
TE
SE
R
DN
G
GND1
GND1
GND1
GND1
1608
L362600 H1 2
1608
L361600 H1 2
1608
L351600 H1 2
2518
L371100 H1 2
D301
SML-020MVT86
1 2
3 4
I333BA10358F
1 OUT1
2 -IN1
3 +IN1
4 VEE 5+IN2
6-IN2
7OUT2
8Vcc
15
3P
A1
26
3P
A1
25
3P
A1
16
3P
A1
20
3K
HC
1
Q3532SA1980UFG
1
2
3
Q3522SB1132 1
2
3
Q312SRC1202EF
1 2
3
Q313SRC1202EF
1 2
3
Q314SRC1202EF
1 2
3
Q311SRC1202EF
1 2
3
Q372SRC1202EF
1
2
3
1005
R321100
12
1005
R3791001 2
1005
R3762201 2
1005
R320
220
12
1005
R3493.3K-1%1 2
1005
R323330 12
50
01
87
3R
K0
11
2
1005
R3121.0K-1%
1 2
50
01
20
3R
K0
11
2
1005
R3591001 2
50
01
10
3R
K0
11
2
50
01
05
3R
%1
-K
22 1
2 1005
R34701 2
1005
R3545.1K-1%1 2
1005
R322330 12
50
01
55
3R
%1
-K
3.
3 12
1005
R3561.0K1 2
1005
R3571.0K1 2
30
3R
01
02
00
11
2 43 5
6
78
35
3R
61
23
07
21
2 43 5
6
78
50
3R
01
02
00
11
2 43 5
6
78
R304
2010
10K
12
34
56
78
70
3R
01
02
00
11
2 43 5
6
78
+3.3V
LED-TEMP
DH
/D
S_
F
LED-LAMP
D-RESET
4T
NC
-N
AF
KEYO1
+5V
KEYO0
KEYI0
1R
EW
OP
RESETN
2A
TA
D
CA
D_
SC
2K
LC
1K
LC
3R
EW
OP
5R
EW
OP
KEYI2
LED-P-R
3T
NC
-N
AF
5R
EW
OP
FAN+15V
CPU-RESET
PM
ET
_N
I
2T
NC
-N
AF
LAMP-S
1T
NC
-N
AF
LED-P-G
1A
TA
D
S306SKRAAAE010
1 2
3 4
S305SKRAAAE010
1 2
3 4
S304SKRAAAE010
1 2
3 4
S302SKRAAAE010
1 2
3 4
S303SKRAAAE010
1 2
3 4
S301SKRAAAE010
1 2
3 4I322NJM2406F
-IN
GND
+IN OUT
V+
50
01
25
3R0
12
1005
R314100K-1%1 2
50
01
31
3R
%1
-K
01 1
2
45
3C
01
/0
01
VK
S/
KV
M
12
50
01
85
3R
K0
.1
12
50
01
54
3R
K0
.1
12
1005
R3281.0K1 2
Q303SRC1202EF
1
2
3
1005
R3181001 2
1005
R373
0
1 2
1005
R374
0
1 2
30
3C
50
01
01
/1
.01
2
46
3C
50
01
01
/1
.01
2
26
3C
50
01
10
0.
012
16
3C
50
01
10
0.
012
1005
R3663.3K1 2
50
01
26
3R
K0
11
2
1005
R3636.8K1 2
1005
R3720
1 2
50
3D
B0
.2
ZD
U
21
40
3D
B0
.2
ZD
U
21
50
01
16
3R
K0
11
2
47
3C
50
01
61
/1
0.
0
12
2/
1B
GR
6R
EW
OP
50
01
51
3R
0 12
50
01
01
13
R 12
LAMP_POW
KEYI1
E301ZH-02H
1
2
E302ZH-02H
1
2
PM
OC
_B
GR
1608
L382600 H1 2
28
3P
A1
31
3D
B0
.2
ZD
U
21
1005
R3806.8K1 2
21
3D
B0
.2
ZD
U
21
18
3C
50
01
10
0.
012
50
01
28
3R
K0
11
2
E303ZH-02H
1
2
18
3P
A1
28
3C
50
01
10
0.
012
1608
L381600 H1 2
R381
2010
10K
12
34
56
78
50
01
15
3R
%1
-K
3.
3 12
1608
L352600 H1 2
I323SN74LV4053APW
Y1
Y0
Z1
Z
Z0
INH
VEE
VSSC
B
A
X0
X1
X
Y
VDD
S309SKHHLMA010
1 2
G1 G2
D321
SML-210DT
12
D322
SML-210DT
12
D323
SML-210DT
12
D324
SML-210DT
12
D325
SML-210DT
12
D326
SML-210DT
12
1005
R331220 12
1005
R339220 12
1005
R333220 12
1005
R336220 12
1005
R340220 12
1005
R335220 12
1005
R332220 12
1005
R337220 12
1005
R334220 12
1005
R338220 12
1005
R341220 12
1005
R3421.0K1 2
1005
R3431.0K1 2
Q3212SC5343UFG
1
23
+3.3V
POWER5
POWER1
1005
R326330 127
03
D
FK
W2
41
SD
S
12
3
50
01
42
3R
K0
11
2
50
01
52
3R
K0
11
2
50
01
72
3R
K0
11
2
LED-N-Y
50
01
86
3R
K0
11
2
1005
R3643.3K1 2
60
3R
01
02
00
11
2
34
56
78
1005
R3651.0K1 2
D302
SML-210VT
12
D303
SML-210VT
12
D306
SML-210YT
12
ADRESET
50
01
77
3R
K0
11
2
Q373DTA114YKA
1
2
3
1005
R3752201 2
1005
R3712201 2
1005
R31901 2
4.7K
5
R383
12
50
01
76
3R
K7
.4
12
50
01
90
3R0
12
50
01
80
3R0
12
ET
UM
E304ZH-02H
1
2
1005
R3843.3K1 2
1608
L383600 H1 2
48
3P
A1
38
3C
50
01
10
0.
012
41
3D
B0
.2
ZD
U
21
48
3C
50
01
10
0.
012
1608
L384600 H1 2
50
01
68
3R
K0
11
2
38
3P
A1
51
3D
B0
.2
ZD
U
21
1005
R3853.3K1 2
1608
L385600 H1 2
4.7K
5
R300
12 58
3C
50
01
10
0.
012
68
3C
50
01
10
0.
012
1608
L386600 H1 2
50
01
09
3R
K0
11
2
50
01
19
3R
K7
.4
12
50
01
78
3R
K0
11
2
1005
R3106.8k-1%
1 2
50
01
06
3R
%1
-K
3.
3 12
1005
R3883.3K-1%1 2
1005
R3693.3K1 2
1005
R3893.3K1 2
68
3P
A1
58
3P
A1
50
01
84
3R
%1
-K
0.
1 12
1005
R392270-1%12
Q315SRC1202EF
1 2
3
Q374SRC1202EF
1
2
3
DOWN LEFTRIGHT
LAMP
TEMP
GREEN
RED
POWINPUT
OUT-SIDE SENSORon Power (10K)
AIR SPEED SENSOR (1K)
UP
LAMP-TEMP SENSOR (10K)
POW INPUT UP
RIGHT DOWN LEFT
YELLOW
OUT-SIDE SENSORin Duct (10K)
IN-SIDE SENSORon PWB (4.7K)
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 4 (CC9SMN/CC9XMN/CC9XM)
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
5
6
7
8
4
3
2
1
5678
4321
5678
4321
5678
4321
54321
54321
54321
54321
54321
45
321
4
5
3
2
1
4
5
3
2
1
4
5
6
3
2
1
4
5
3
2
1
4
5
6
3
2
1
4
5
6
3
2
1
2G1G
54321 54321
C8720.1/251
2
15
8C
52
/1
.0
12
52
8C
50
01
F-
3.
6/
0.
11
2
11
8C
F-
52
/1
.0
12
C806
10050.01-F
1 250
8C
50
01
F-
10
.01
2
40
8C
50
01
F-
10
.0 1
2
41
8C
50
01
F-
61
/1
.0
12
02
8C
50
01
01
/1
.0
12
31
8C
50
01
01
/1
.0 1
2
81
8C
50
01
01
/1
.01
2
C853
10050.01/16
12
C863
10050.01/161
2
72
8C 50
01
F-
3.
6/
0.
1
46
8C
52
/1
.0 1
2
C8430.1/251 2
C873
10050.01/161
2
17
8C
52
/1
.0 1
2
45
8C
52
/1
.0 1
2
C826
21254.7/10-F
12
14
8C
F-
52
/1
.0
12
C8620.1/25
12
44
8C
50
01
F-
10
.0 1
2
47
8C
52
/1
.01
2
C8520.1/25
12
16
8C
52
/1
.0 1
2
32
8C
01
/0
01
VK
S/
KV
M12
82
8C
3.
6/
02
2V
KS
/K
VM1
2
12
8C 3.
6/
00
1V
KS
/K
VM
12
10
8C
52
/7
4
VK
S/
KV
M
12
42
8C
3.
6/
02
2
VK
S/
KV
M1
2
22
8C
01
/0
01
VK
S/
KV
M
12
92
8C
3.
6/
02
2V
KS
/K
VM1
2
30
8C
3.
6/
00
1V
KS
/K
VM
12
21
8C
61
/7
4V
KS
/K
VM
12
71
8C
3.
6/
74
VK
S/
KV
M
12
91
8C
3.
6/
00
1V
KS
/K
VM
12
20
8C
01
/7
4V
KS
/K
VM
12
21
8D
03
-L
35
0B
R
12
D810
SDS51112
11
8D
03
-L
35
0B
R1
2
I807SPI-8001TW
ADND
Vin1
VCC
SWout1
DGND1
SS1
Vref1
NC-8 AGND
Vref2
SS2
DGND2
SWout2
C/E
Vin2
NC-16
3216
L804C1V222-2A
123
3216
L805C1V222-2A
123
GND1
GND1
1608
L811600 H
1 2
1608L812 600 H
1 2
2125
L829600 H1 2
1608L813 600 H
1 2
1608
L801600 H
1 2
2125
L825600 H1 2
2125
L833600 H
1 2
1608
L824600 H
1 2
1608
L821600 H
1 2
1608
L807 600 H12
C12-K4.5L
L81647 H
1 2
1608
L827600 H
1 2
2125
L823600 H1 2
1608
L806600 H
12
2125
L826600 H
1 2
2125
L828600 H1 2
2125
L832600 H1 2
1608
L830600 H
1 2
2125
L822600 H1 2
1608
L831600 H
1 2
SLF6028
L81547 H
1 2
1608
L808600 H
12
I842BA10358F
1 OUT1
2 -IN1
3 +IN1
4 VEE 5+IN2
6-IN2
7OUT2
8Vcc
26
8I
F8
53
01
AB
11
TU
O
21NI -
31
NI
+
4E
EV
52
NI
+
62NI -
72
TU
O
8c
cV
25
8I
F8
53
01
AB
11
TU
O
21NI-
31
NI
+
4E
EV
52
NI
+
62NI-
72
TU
O
8c
cV
27
8I
F8
53
01
AB
11
TU
O
21N I-
31
NI
+
4E
EV
52
NI
+
62NI-
72
TU
O
8c
cV
4F
PA 1
01
FP
A 16
FP
A 1
1F
PA 1
2F
PA 1
9F
PA 1
5F
PA 1
41
FP
A
1
7F
PA 1
31
FP
A
1
5P
PA 1
51
PA
1
31
PA
1
11
FP
A 1
7P
PA1
3F
PA 1
3N
PA
1
2N
PA
1
1N
PA
1
6P
PA 1
4P
PA 1
61
PA 1
3P
PA 1
1P
PA 1
2P
PA 1
Q8612SD1760
123
Q8512SD1760
123
Q8712SD176012
3
Q804DTA114YKA
12
3
Q802DTA114YKA
12
3
Q803SRC1202EF
1
2
3
Q805SRC1202EF
1
2
3
1005
R8531.0K
12
1005
R87722K-1%
12
1005
R8731.0K
1 2
1005
R85722K-1%
12
50
01
46
8R
K0
1 12
50
01
28
8R
K2
2
12
50
01
47
8R
K0
1
12
50
01
07
8R
00
11
2
50
01
55
8R
%1
-K
51
12
50
01
38
8R
K2
2
12
50
01
56
8R
%1
-K
511
2
1005
R81539K
1 2
1005
R872100
12
50
01
71
8R
K0
1
12
50
01
57
8R
%1
-K
51
12
50
01
70
8R
00
1
12
1005
R8060
1 2
1005
R86722K-1%
12
1005
R871100
12
1005
R862100
12
50
01
06
8R
00
11
2
1005
R861100
12
1005
R8631.0K
1 25
00
1
96
8R
%1
-K
51
12
1005
R8662.7K-1%
12
50
01
52
8R
%1
-0
331
2
1005
R8431.0K1 2
50
01
45
8R
K0
1
12
1005
R852100
12
50
01
18
8R
K2
2
12
1005
R851100
12
50
01
05
8R
00
11
2
50
01
64
8R
00
1
12
50
01
74
8R
%1
-K
6.
5
12
50
01
84
8R
%1
-K
2.
8
12
50
01
54
8R0
21
1005
R8762.7K-1%
12
50
01
87
8R
%1
-K
7.
2 12
50
01
97
8R
%1
-K
51
12
1005
R82910K1 2
50
01
86
8R
%1
-K
7.
2
12
50
01
95
8R
%1
-K
51
12
50
01
72
8R
K0
.1
12
1005
R8562.7K-1%
12
50
01
13
8R
%1
-K
0.
1
12
50
01
42
8R
%1
-0
74 1
2
50
01
03
8R
K0
.1
12
1005
R8281001 2
50
01
62
8R
%1
-K
0.
1
12
+1.5V
POWER3
FAN-CNT4
V8
.1
+
FAN-CNT3
1T
NC
-N
AF
RMT
LAMP_ON
MOUSE
LAMP_POW
+4.0V
PWRC
FAN-CNT2
FAN+15V
LAMP-S
POWER1
V5
+
V3
.3
+
PV
3.
3+
V5
.5
1+
5R
EW
OP
+17V
I841SI-3010KM
cV
ni
V
DN
G
tu
oV
JD
A
I851
SI-3010KM
cV
ni
V
DN
G
tu
oV
JD
A
I801SI-3010KM
cV
ni
V
DN
G
tu
oV
JD
A
I871SI-3010KM
cV
ni
V
DN
G
tu
oV
JD
A
I861SI-3010KM
cV
ni
V
DN
G
tu
oV
JD
A
41
8D
B0
.2
ZD
U
21
31
8D
B0
.2
ZD
U
21
50
01
44
8R
%1
-K
21
12
NO-COVER
1S
PA
1 2S
PA 1
3216
L802C1V222-2A
123
50
01
85
8R
%1
-K
7.
2 12
21
FP
A
1
6R
EW
OP
50
01
61
8R
00
1
12
1005
R811100
12
1005
R83610K
1 2 1005
R83522K
12
3216
L803C1V222-2A
123
20
8I
CS
C3
31
11
KT tn
oc
V
DN
G
tu
oV
pN
ni
V
61
8C
52
12
3.
6/
011
2
51
8C
C-
10
0.
0
12
V6
.6
+
I821SN74LVC1G08DCK
A
B
GND Y
Vcc
I822SN74LVC1G08DCK
A
B
GND Y
Vcc
1005
R8E7100
1 2
1005
R8E4100
1 2
50
01
5E
8R
00
11
2
50
01
2E
8R
00
1
12
GND1
1005
R8E6100
1 2
1005
R8E3100
1 2
VOL_SEL
DATA1
CLK1
CLK-A
DATA-A
1005
R8E11001 2
18
8C
50
01
61
/1
0.
0
12
A_GND
E802ZH-03H
1
2
3
E800PH-12H
1
2
3
4
5
6
7
8
9
10
11
12
E805ZH-03H
1
2
3
FAN_FG
I831SN74LVC1G97DCK
In1
GND
In0 Y
VCC
In2
50
01
7A
8R
00
11
21005
R8A41001 2
I832SN74LVC1G86DCK
A
B
GND Y
Vcc1005
R8C21001 2
R8A8100
1005
1 2
1005
R8A51001 2
1005
R8C11001 2
I833SN74LVC1G97DCK
In1
GND
In0 Y
VCC
In2
1005
R8A11001 2
1005
R8A91001 2
FG_SEL2
FG_SEL16A
8R
01
02
K0
11
2 43 5
6
78
1005
R8A21001 2
I834SN74LVC1G97DCK
In1
GND
In0 Y
VCC
In2
GF
-P
A1
1005
R8A31001 2
GF
-H
C1
54
8C
52
12
52
/1
.0
12
S801
SPPB620300
21
2G
1G
E804SH-04H
1
2
3
4
1608
L814600 H
1 2
APN4
1
Q808SRC1202EF
1
2
3
Q807DTA114YKA
12
3
70
8C
50
01
F-
10
.01
2
R8102.2K
1 2
50
01
24
8R
%1
-K
7.
212
50
01
14
8R
%1
-K
011
2
50
01
04
8R
%1
-K
22
12
50
01
41
8R
%1
-K
2.
212
50
01
23
8R
%1
-0
33 1
2
50
01
33
8R
%1
-0
221
2
50
01
32
8R
%1
-K
011
2
50
01
02
8R
%1
-K
011
2
50
01
91
8R
%1
-K
2.
8 12
50
01
81
8R
%1
-K
2.
8 12
FAN+15POW
50
01
09
8R
K0
11
2
50
01
19
8R
K0
11
2
E806ZH-03H
1
2
3
E807ZH-04H
1
2
3
4
E801ZH-04H
1
2
3
4
1005
R8000
1 2
I803BA00BC0WFP
LT
C
CC
V
DN
G
TU
O C
I805BA00BC0WFP
LT
C
CC
V
DN
G
TU
O C
50
01
22
8R
%1
-K
51 1
2
50
01
12
8R
%1
-K
51 1
2
50
01
21
8R
%1
-K
72 1
2
50
01
31
8R
%1
-K
7.
4 12
1005
R8013.9K
1 2
2S
F-
PA
1
1S
F-
PA
1
Q809
2SC5343UFG
1
23
29
8R
01
02
K0
1
12
34
56
78
39
8R
01
02
K0
1
12
34
56
78
8P
PA 1
9P
PA 1
1005
R888100
12
65
8C
52
12
3.
6/
011
2
66
8C
52
12
3.
6/
011
2
67
8C
52
12
3.
6/
011
2
50
01
48
8R
K0
1
12
1005
R88510K
12
50
01
78
8R
K0
1
12
D851
SDS5111 2
D861
SDS5111 2
D871
SDS5111 2
50
01
50
8R
K0
.1
12
Q806DTA114YKA
1 2
3
14
8D
11
5S
DS
12
50
01
94
8R
K0
01
12
C893
21254.7/16
12 C891
21254.7/16
12
C892
21254.7/16
12
C875100/16
MVK/SKV
12
C855100/16
MVK/SKV
12
56
8C
61
/0
01
VK
S/
KV
M
12
C842100/16
MVK/SKV
12
1005
R8090
1 2
1005
R8890
1 2
1005
R803100K
1 2
R804100
1 2
1005
R808100
12
50
01
20
8R
K3
.3
12
3.3V-CPU 5V
3.3V-Panel
FAN GND
+17V
+4.1V
+6.6V
+13.5V
Audio_GND
GND
GND
+4.1V
ACTIVE
P_ON/OFF/CNT
GND
LAMP MISS
GND
15.5V-Panel
VCC
VCC
(EXHAUST FAN)
GND
(INSIDE PANEL FAN)
FAN1S
GND
VCC
)N
AF
T
SU
AH
XE
(
VCC
GND
FAN4S
(LAMP FAN)
(EXHAUST FAN)
(RG PANEL FAN)
(B PANEL FAN)
FAN3S
CONT
(SUB FAN)
GND
NC
(OUTSIDE PANEL FAN)
FAN2S
NC+6.6V
GT
-V
8.
1
1.55V-CPU
V5
8.
21
=V
1*
24
8R
/)
04
8R
+1
48
R+
24
8R
(
LAMP_COVER_SW
+5V VCC
GND
REMOTE
SILENT MODE
ROHM RegROHM Reg
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 5 (CC9SMN/CC9XMN/CC9XM)
D1
H3
E5
E4
E6
F15
G4
G5
K9
K10
K11
K12
L9
L10
L11
L12
M9
M10
M11
M12
P15
P16
P17
R4
R5
R6
R7
T4
T5
T6
T7
T15
T16
T17
U4
U17
V18
V3
K3
K2
K1
J3
H1
C1
J1
J2
H2
D2
E2
C2
E1
B4
C4
B5
A1
B1
B2
A4
A3
B3
A2
C19
B20
B19
B18
C6
A20
E18
V20
N17
N16
N5
J11
N4
J12
J10
J9
G6
F4
E16
M1
M5
M4
L17
L16
L5
L4
K17
K16
K5
U13
U12
U18
P4
P5
U2
F6
E17
E15
E14
D15
U7
E10
F14
F16
F17
F5
F1
D17
D16
D14
D6
D5
D4
C18
C3
U16
U15
U6
U5
L3
L1
G2
F2
R17
R16
R15
D9
D8
D7
E7
D10
D11
D13
D12
E8
E9
E11
T10
E12
E13
T9
T8
U8
T11
T12
T14
T13
U14
U9
U10
U11
J16
J4
J17
G17
K4
M16
J5
H17
M17
H16
H5
H4
G16
D18
C5
Y7
W6
Y6
U1
T1
T2
V2
V1
W1
W3
W5
Y3
N1
A6
Y5
M2
M3
N2
N3
P2
P1
R2
R1
Y1
Y2
Y4
W4
A7
C9
A8
C8
B8
B7
C7
B6
A5
Y20
W19
Y19
Y13
Y12
W12
W13
V13
W14
Y15
W18
W16
W9
C10
Y18
W8
V9
Y9
W10
Y11
Y10
V11
W11
W15
Y16
Y17
W17
C11
A13
C12
A12
B12
B11
A11
B10
A10
D20
E19
E20
L19
M20
L18
K20
K18
J20
J19
F19
H19
T20
A15
F20
U20
T19
R19
R20
N19
N18
M19
M18
J18
H20
G20
G19
A16
B17
A17
B16
C16
C15
B15
C14
B14
C4212.2/6.31 2
C4022.2/6.3
1 2
C424
10050.01/16
1
2
14
4C
50
01
61
/1
0.
0
12
03
4C
50
01
01
/1
.0
12
C410
10050.01/16
1 2
C404
10050.01/16
1 2
C405
10050.01/16
1 2
C425
10050.01/16
1 2
C4112.2/6.3
1 2
C403
10050.01/16
1 2
C406
10050.01/16
1 2
C426
10050.01/16
1 2
C409 10050.01/16
1 2
C407
10050.01/16
1 2
C427
10050.01/16
1 2
C422
10050.01/16
1 2
C408 10050.01/16
1 2
C4282.2/6.3
1 2
C423
10050.01/16
1
2
C412220/6.3MVK/SKV
12
02
4C
3.
6/
02
2V
KS
/K
VM
12
GND1
1
2518
L4022.2 H
1 2
2518
L40110 H
1 2I401
L3E07070K0A
D7VDD1-D7
D8VDD1-D8
D9VDD1-D9
D10VDD1-D10
D11VDD1-D11
D12VDD1-D12
D13VDD1-D13
E7VDD1-E7
E8VDD1-E8
E9VDD1-E9
E10VDD1-E10
E11VDD1-E11
E12VDD1-E12
E13VDD1-E13
T8VDD1-T8
T9VDD1-T9
T10VDD1-T10
T11VDD1-T11
T12VDD1-T12
T13VDD1-T13
T14VDD1-T14
U8VDD1-U8
U9VDD1-U9
U10VDD1-U10
U11VDD1-U11
U12VDD1-U12
U13VDD1-U13
U14VDD1-U14
C5VDD2-C5
D18VDD2-D18
G16VDD2-G16
G17VDD2-G17
H4VDD2-H4
H5VDD2-H5
H16VDD2-H16
H17VDD2-H17
J4VDD2-J4
J5VDD2-J5
J16VDD2-J16
J17VDD2-J17
K4VDD2-K4
K5VDD2-K5
K16VDD2-K16
K17VDD2-K17
L4VDD2-L4
L5VDD2-L5
L16VDD2-L16
L17VDD2-L17
M4VDD2-M4
M5VDD2-M5
M16VDD2-M16
M17VDD2-M17
N4VDD2-N4
N5VDD2-N5
N16VDD2-N16
N17VDD2-N17
P4VDD2-P4
P5VDD2-P5
U2VDD2-U2
U18VDD2-U18
V20TEST1
E18TEST2
A20TEST3
C6TEST4
B18SDATA
B19SCS
B20SCLK
C19RESET
A2OSDSW
A3OSDRIN0
B3OSDRIN1
A4OSDGIN0
B4OSDGIN1
C4OSDBIN0
B5OSDBIN1
A1TMS
B1TDI
B2TCK
C1TRST
C2TDO
D2VSYNC
E2HSYNC
E1DCLK
H2SELECT
H1CPOUT
J1VCOIN
J2VDDP
J3EN
K1VSEL
K2TEST
K3GNDP
V18GND-V18
V3GND-V3
U17GND-U17
U16GND-U16
U15GND-U15
U7GND-U7
U6GND-U6
U5GND-U5
U4GND-U4
T17GND-T17
T16GND-T16
T15GND-T15
T7GND-T7
T6GND-T6
T5GND-T5
T4GND-T4
R17GND-R17
R16GND-R16
R15GND-R15
R7GND-R7
R6GND-R6
R5GND-R5
R4GND-R4
P17GND-P17
P16GND-P16
P15GND-P15
M12GND-M12
M11GND-M11
M10GND-M10
M9GND-M9
L12GND-L12
L11GND-L11
L10GND-L10
L9GND-L9
K12GND-K12
K11GND-K11
K10GND-K10
K9GND-K9
J12GND-J12
J11GND-J11
J10GND-J10
J9GND-J9
G6GND-G6
G5GND-G5
G4GND-G4
F17GND-F17
F16GND-F16
F15GND-F15
F14GND-F14
F6GND-F6
F5GND-F5
F4GND-F4
E17GND-E17
E16GND-E16
E15GND-E15
E14GND-E14
E6GND-E6
E5GND-E5
E4GND-E4
D17GND-D17
D16GND-D16
D15GND-D15
D14GND-D14
D6GND-D6
D5GND-D5
D4GND-D4
C18GND-C18
C3GND-C3
M1NRG
L3SHENB
L1DIRY
H3CLP2
G2CLP1
F2VRESET0
F1HRESET0
D1HPLL
I401L3E07070K0A
C9RIN0
A8RIN1
B8RIN2
C8RIN3
A7RIN4
B7RIN5
C7RIN6
A6RIN7
B6RIN8
A5RIN9
M2CLXOUTR
M3ENBX4R
N1ENBX3R
N2ENBX2R
N3ENBX1R
P2MONR
P1DXOUTR
R2DYOUTR
R1CLYOUTR
U1FRPR
T1DIRXRN
T2DIRXR
V2SHCLKR
V1XFRR
W1STSQER
W3STSQOR
Y1ROUT9
Y2ROUT8
Y3ROUT7
Y4ROUT6
W4ROUT5
Y5ROUT4
W5ROUT3
Y6ROUT2
W6ROUT1
Y7ROUT0
I401L3E07070K0A
A13GIN0
C12GIN1
B12GIN2
A12GIN3
C11GIN4
B11GIN5
A11GIN6
C10GIN7
B10GIN8
A10GIN9
W8CLXOUTG
V9ENBX4G
W9ENBX3G
Y9ENBX2G
W10ENBX1G
Y11MONG
Y10DXOUTG
V11DYOUTG
W11CLYOUTG
Y13FRPG
Y12DIRXGN
W12DIRXG
W13SHCLKG
V13XFRG
W14STSQEG
Y15STSQOG
W15GOUT9
Y16GOUT8
W16GOUT7
Y17GOUT6
W17GOUT5
Y18GOUT4
W18GOUT3
Y19GOUT2
W19GOUT1
Y20GOUT0
I401L3E07070K0A
B17BIN0
A17BIN1
C16BIN2
B16BIN3
A16BIN4
C15BIN5
B15BIN6
A15BIN7
C14BIN8
B14BIN9
U20CLXOUTB
T19ENBX4B
T20ENBX3B
R19ENBX2B
R20ENBX1B
N19MONB
N18DXOUTB
M19DYOUTB
M18CLYOUTB
L19FRPB
M20DIRXBN
L18DIRXB
K20SHCLKB
K18XFRB
J20STSQEB
J19STSQOB
J18BOUT9
H20BOUT8
H19BOUT7
G20BOUT6
G19BOUT5
F20BOUT4
F19BOUT3
E20BOUT2
E19BOUT1
D20BOUT0
CHTDO 1
CHCP21CHCP11
CHQEG1
01
4P
A1
41
4P
A1
CHTMS 1
CHQER1
CHSHE1
CH4021
01
4H
C1
51
4P
A1
CHQEB1
CHTDI 1
31
4P
A1
21
4P
A1
CH4011CHCLO1
41
4H
C1
11
4H
C1
51
4H
C1
11
4P
A1
21
4H
C1
31
4H
C1
50
01
73
4R
%1
-5
71
2
50
01
33
4R
K0
11
2
1005
R451100
1 2
50
01
23
4R
K7
41
2
1005
R44247
1 2
1005
R43620K-1%1 2
50
01
25
4R0
12
R416
2010
56
1 2
3 4
5 6
7 8
R409
2010
56
1 2
3 4
5 6
7 8
R405
2010
56
1 2
3 4
5 6
7 8
R407
2010
56
1 2
3 4
5 6
7 8
R412
2010
56
1 2
3 4
5 6
7 8
R410
2010
56
1 2
3 4
5 6
7 8
R406
2010
56
1 2
3 4
5 6
7 8
R414
2010
56
1 2
3 4
5 6
7 8
R417
2010
56
1 2
3 4
5 6
7 8
R434
2010100K
1 2
3 4
5 6
7 8
R418
2010
56
1 2
3 4
5 6
7 8
R413
2010
56
1 2
3 4
5 6
7 8
R408
2010
56
1 2
3 4
5 6
7 8
R435
2010100K
5 6
3 4
1 2
7 8
R403
2010
56
1 2
3 4
5 6
7 8
R404
2010
56
1 2
3 4
5 6
7 8
R401
2010
56
1 2
3 4
5 6
7 8
R402
2010
56
1 2
3 4
5 6
7 8
R415
2010
56
1 2
3 4
5 6
7 8
R411
2010
56
1 2
3 4
5 6
7 8
DXOUTR1
STSQOR1
ENBXR11
ENBXG21
CLYOUTR1
+3.3VP1
XFRG1
FRPB1
STSQOG1
GD61
GD71
DHS1
CS_TG1
BD41
DIRXGN1
MONR1
BD71
BD21
RD81
BD31
RD21
ENBXB21
CLXOUTB1
DYOUTR1
GD41
CLYOUTG1
XFRB1
DXOUTB1
FRPR1
ENBXG11
BD11
ENBXR31
ENBXB11
DIRXR1
DVS1
BD01
RD41
XFRR1
GD81
GD31
BD51
CLK21
MONG1
DIRXRN1
CLXOUTG1
BD61
DYOUTG1
RD11
BD91
CLYOUTB1
ENBXG41
RESETP1
FRPG1
DCLK1
DIRXG1
NRG1
CLXOUTR1
ENBXG31
+1.8V1
DIRXBN1
ENBXB31
ENBXR41
BD81
RD01
GD11
ENBXB41
GD91
SHCLKR1
RD31
SHCLKG1
DXOUTG1
RD91
ENBXR21
MONB1
STSQOB1
DIRXB1
RD51
RD71
DATA21
GD21
SHCLKB1
GD51
GD01
RD61
DYOUTB1
DIRY1
1005
R421561 2
1005
R422561 2
1005
R423561 2
2125
H421SC020JT
123
2125
H422SC020JT
123
2125
H423SC020JT
123
1005
R45301 2
DRE0 1
DRE1 1
DRE2 1
DRE3 1
DRE4 1
DRE5 1
DRE6 1
DRE7 1
DRE8 1
DRE9 1
DGE8 1
DGE9 1
DGE6 1
DGE1 1
DGE3 1DGE2 1
DGE0 1
DGE7 1
DGE4 1
DGE5 1
DBE6 1
DBE0 1
DBE1 1
DBE7 1
DBE3 1
DBE4 1
DBE2 1
DBE5 1
DBE8 1
DBE9 1
50
01
13
4R0
1224
4C
50
01
C-
p0
.5 1
2
1005
R460220
1 2
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 6 (CC9SMN/CC9XMN/CC9XM)
5
6
7
8
4
3
2
1
5
6
7
8
4
3
2
1
04V
93V
73V
63V
83V
0 5V
94V
84V
91V
1 5V
75V
65V
53V
1 4V
85V
06V
74V
25V
95V
55V
4 3V
24V
35V
4 5V
64V
92V
03V
13V
23V
82V
3 4V
44V
54V
33V
7 2V
62V
5 2V
42V
32V
22V
1 2V
81V
71V
6 1V
11V
2 1V
31V
41V
51V
9V 01V
8V7V6V02
V
5V4 V
3V2 V
1V
56 46 36 26
142 4
3444
625242322 212
16
5506
7585
4595
3565
049383736353433 323130 39282724797 6787 5708 77
023 1
7191
418 1
6 151
63
114
97
215
201
81
25
37 27 17 07 96 86 76 66
5 464
7 484
9 405
15
ENBXR2
RT
UO
XD
RDX
RD1
DI
MV
FRPR
STSQOR
DIRXR
FRPR
DIRXR
RD0
2R
XB
NE
CLXOUTR
XFRR
DATA2
1R
XB
NE
DIRXRN
1D
R
RT
UO
YD
LSR_CS
CLK2
2D
R
RVID1
RT
UO
YL
C
DATA2
RVID2ENBXR1
3D
R
4D
R
RVID5
RT
UO
XL
C
XFRR
LSR_CS
NRG
DIRXRN
XR
ID
R
RVID6
RD9
R/CLX
RD7
5D
R
ENBXR3
GR
NR
DIRY
STSQOR
YR
ID
R6
DR
YL
CR
NO
MR
RCLX
RD4
MONR
MO
CC
LR
GR
N
7D
R
YL
C/
R
RENBX4
ENBXR4
4R
XB
NE
SHCLKR
RD6
RENBX3
RVID3
9D
RRENBX2
RD3
8D
R
CLYOUTR
RD2
VMID
RD5
DYOUTR
3R
XB
NE
0D
R
RVID4
DIRY
YD
R
DXOUTR
RENBX1
RN
OM
RD8
RMON
RDY
RDIRY
RVID6
RVID5
RVID4
RVID3
RVID2
RVID1
RDX
R/CLX
RCLX
RDIRX
RENBX4
RENBX3
RENBX2
RENBX1
RNRG
R/CLY
RCLY
RDY
SHCLKR
RLCCOM
CLK2
C521
0.1/25
1 2
50
5C
52
/1
.0
12
21
5C
50
01
52
/1
0.
01
2
C5130.1/25
12
11
5C
50
01
52
/1
0.
01
2
23
5C
52
/1
.01
2
01
5C
50
01
52
/1
0.
0
12
C5080.1/25
12
C5030.1/25
12
04
5C
52
/1
.0
12
42
5C
50
01
61
/1
0.
0
12
C5070.1/25
12
03
5C
52
/1
.0 1
2 13
5C
52
/1
.01
2
14
5C
52
/1
.0
12
C520
21251.0/25-F
C5060.1/25
12
C50922/16
MVK/SKV1 2
C501
22/6.3MVK/SKV
12
C514
22/16MVK/SKV
1 2
GND1
GND1
GND1
81
52
10
5L 22
H1
2
81
52
20
5L 01
H1
2
I502BA10358F
1 OUT1
2 -IN1
3 +IN1
4 VEE 5+IN2
6-IN2
7OUT2
8Vcc
I503BA4560F
1 OUT1
2 -IN1
3 +IN1
4 VEE 5+IN2
6-IN2
7OUT2
8Vcc
APR23
1
RR
VP
A1
APR21
1
APR25
1
APR22
1
APR20
1
APR29
1
APR27
1
APR18
1
APR28
1
APR17
1
APR16
1
APR26
1
RR
VH
C1
APR15
1
APR14
1
APR19
1
APR13
1
APR12
1
APR05
1
APR04
1
APR11
1
APR08
1
APR10
1
APR09
1
APR01
1
RD
MH
C1
APR02
1
RD
MP
A1
APR07
1
APR03
1
50
01
22
5R K
011
2
50
01
10
5R
00
1
12
50
01
82
5R
%1
-K
01 1
2
1005
R512100
12
50
01
23
5R
K0
1
12
50
01
52
5R K2
.11
2
50
014
05
R0
011
2
50
01
02
5R
K2
.8
12
50
014
25
R
K8
.11
2
50
01
13
5R
K6
.5
12
50
01
03
5R
K8
11
2
50
012
05
R0
01
12
50
01
11
5R
00
1
12
50
01
72
5R
%1
-K
8.
112
1005
R508
10
1 2
50
01
62
5R
%1
-K
01
12
1005R50910
1 2
1005
R513100K
1 2
1005
R51447K
1 2
50
01
50
5R
00
1
12
50
01
12
5R
K2
.1
12
R510
201010
1 2
3 4
5 6
7 8
R506
2010100
1 2
3 4
5 6
7 8
R5072010100
1 2
3 4
5 6
7 8
30
5R
01
02
00
1
12 4
3 56
78
RD2
RD3
RD5
DIRY
RD9
RD0
NRG
RD8
ENBXR3
DIRXRN
ENBXR4
SHCLKR
RD6
FE
RV
STSQOR
LSR_CS
DXOUTR
VMID
MONR
ENBXR1
SVREFH
V5
.5
1+
CLYOUTR
PV
3.
3+
SVREFL
DYOUTR
FRPR
RD4
RD1
DI
MV
DATA2
DIRXR
RD7
CLXOUTR
CLK2
ENBXR2
XFRR
1005
R5900
1 2
I501
L3E06100D0B
DGND
STBY
CLK
XFR
STSQ
INV
R/L
E/O
SDATA
SCS
SCLK
NC-12
AGNDS
SVREFL
SVREFH
LCCOM
DCOUT
AVCCS
DIRXIN
DIRYIN
NI
YD
NI
YL
C
XR
ID
YR
ID
YD
YL
C
NY
LC
LC
CV
A
NI
GR
N
GR
N
LD
NG
A
NI
NO
M
33
-C
N
TU
ON
OM
NI
XD
NI
1X
BN
E
NI
2X
BN
E
NI
3X
BN
E
NI
4X
BN
E
NI
XL
C
DX
ENBX1
ENBX2
ENBX3
ENBX4
CLX
CKXN
AGND6
VID6
AVCC5
VID5
AGND4
VID4
AVCC3
VID3
AGND2
VID2
AVCC1
VID1
AGND1
PY
B
1V
2V
LF
ER
V
HF
ER
V
CA
DC
CV
A
CA
DD
NG
A
86
-C
N
96
-C
N
0B
D
1B
D
2B
D
3B
D
4B
D
5B
D
6B
D
7B
D
8B
D
9B
D
CC
VD
1V1
CV
2V2
CV
3V3
CV
4V4
CV
5V5
CV 6
V6
CV
7V
7C
V
8V
8C
V
9V
9C
V
01
V
01
CV
11
V
11
CV
21
V
21
CV
31
V
31
CV
41
V
41
CV
51
V
51
CV
61
V
61
CV
71
V
71
CV
81
V
81
CV
91
V
91
CV
02
V0
2C
V1
2V
12
CV
22
V2
2C
V3
2V
32
CV
42
V4
2C
V 52
V5
2C
V
62
V
62
CV
72
V
72
CV
82
V
82
CV
92
V
92
CV
03
V
03
CV
13
V
13
CV
23
V
23
CV
33
V
33
CV
43
V
43
CV
53
V
53
CV
63
V6
3C
V7
3V
73
CV
83
V8
3C
V9
3V
93
CV 04
V0
4C
V
14
V
14
CV
24
V
24
CV
34
V
34
CV
44
V
44
CV
54
V
54
CV
64
V
64
CV
74
V
74
CV
84
V8
4C
V9
4V
94
CV
05
V0
5C
V 15
V1
5C
V
25
V
25
CV3
5V
35
CV
45
V
45
CV
55
V
55
CV
65
V6
5C
V7
5V
75
CV 85
V
85
CV9
5V
95
CV
06
V
06
CV
C523
33/10MVK/SKV
12
C522
1.0/16
1 2
40
5C
50
01
10
0.
01
2
81
52
30
5L 22
H1
2
1005
R59301 2
1005
R5230
1 2
C5020.1/25
12
P50154104-30HUp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
C542
1005
5.0p-C
12
1005
R591220
1 2
R Panel Part
VID2
VSSX
/CLY
ENB1
VID5
VID3
N.C.(NRS1)
N.C.(MON)
ENB4
CLY
LCCOM
VID6
DY
NRG
ENB2
VID4
LCCOM
CLX
VDDY
VSSY
ENB3
DY
VID1
N.C.
/CLX
DIRY
VDDX
DIRX
N.C.(NRS2)
DX
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 7 (CC9SMN/CC9XMN/CC9XM)
5
6
7
8
4
3
2
1
04V
93V
73V
63V
8 3V
0 5V
94V
84V
91V
15V
75V
6 5V
53V
14V
85V
06V
74V
25V
9 5V
55V
43V
24V
3 5V
45V
6 4V
9 2V
0 3V
1 3V
23V
8 2V
34V
4 4V
54V
33V
72V
62V
5 2V
42V
3 2V
22V
12V
81V
7 1V
61V
11V
21V
31V
41V
51V
9V 01V
8V7V6V02
V
5V4V
3V2V
1 V
56 46 36 26
1 424
3 444
6252423 22212
16
5506
7585
4595
3565
0 49383736 35 34 3332 3130 39282724797 6787 5708 7 7
0231
7191
4181
615 1
63
114
97
215
201
81
25
3 7 2 7 17 0 7 9 6 8 6 76 6 6
546 4
7484
9405
15
YL
CG
4D
G
NO
MG
FRPG
GD3
GENBX1
YD
G
GT
UO
YL
C9
DG
7D
GDIRXGN
ENBXG3 GVID4
GENBX4
1G
XB
NE
2D
G
MONG
VMID
3D
G
GD7
MO
CC
LG
1D
G
GVID5
YR
ID
G
GT
UO
XD
GD8
4G
XB
NE
5D
G
GD9
3G
XB
NE
GVID2
GVID3
GT
UO
YD
6D
G
ENBXG4
DATA2
2G
XB
NE
NRG
DIRXGN
FRPG
GD6
GD0
GD2
XFRG
GDX
GENBX3
LSG_CS
GD5
DIRY
ENBXG1
GD1
XR
ID
G
ENBXG2
GVID6
DXOUTG
GN
OM
0D
G
STSQOG
GT
UO
XL
C
GD4
GENBX2
DYOUTG
DIRXG
STSQOG
CLK2
GCLX
XFRG
SHCLKG
DIRXG
DIRY
GR
N
DI
MV
G/CLX
GR
NG
GVID1
YL
C/
G
8D
G
CLYOUTG
CLXOUTG
GMON
GDY
GDIRY
GVID6
GVID5
GVID4
GVID3
GVID2
GVID1
GDX
G/CLX
GCLX
GDIRX
GENBX4
GENBX3
GENBX2
GENBX1
GNRG
GDY
GCLY
G/CLY
GLCCOM
SHCLKG
LSG_CS
DATA2
CLK2
C6060.1/25
12
C6080.1/25
12
13
6C
52
/1
.01
2
21
6C
50
01
52
/1
0.
01
2
11
6C
50
01
52
/1
0.
01
2
01
6C
50
01
52
/1
0.
0
12
23
6C
52
/1
.01
2
42
6C
50
01
61
/1
0.
012
33
6C
50
01
61
/1
0.
0 12
C6020.1/25
12
C6130.1/25
12
03
6C
52
/1
.0 1
2
C6070.1/25
12
C620
21251.0/25-F
50
6C
52
/1
.0
12
C621
0.1/25
1 2
C6030.1/25
12
C614
22/16MVK/SKV
1 2
C601
22/6.3MVK/SKV
12
C60922/16
MVK/SKV1 2
GND1
GND1
81
52
10
6L 22
H1
2
81
52
20
6L 01
H1
2
I602BA10358F
1 OUT1
2 -IN1
3 +IN1
4 VEE 5+IN2
6-IN2
7OUT2
8Vcc
GD
MP
A1G
RV
HC1
APG13
1
APG01
1
GR
VP
A1
APG02
1
APG03
1
APG04
1
APG05
1
APG07
1
APG09
1
APG17
1
APG10
1
APG18
1
APG11
1
GD
MH
C1
APG12
1
APG29
1
APG20
1
APG14
1
APG19
1
APG15
1
APG16
1
APG26
1
APG25
1
APG23
1
APG27
1
APG28
1
APG21
1
APG22
1
1005
R613100K
1 2
50
014
06
R0
011
2
1005
R619100
1 2
1005R60910
1 2
50
01
72
6R
K2
.8
12
1005
R608
10
1 2
1005
R61447K
1 2
50
01
02
6R
K2
.8
12
50
01
13
6R
K8
.1
12
50
01
11
6R
00
1
12
50
012
06
R0
01
12
50
01
92
6R
K0
1
12
50
01
10
6R
00
11
2
50
01
22
6R K
011
2
50
01
50
6R
00
1
12
50
01
23
6R
K2
.1
12
50
014
26
R K8
.11
2
50
01
12
6R
K2
.1
12
50
01
82
6R
K2
.1
12
50
01
52
6R
K2
.11
2
R610
201010
1 2
3 4
5 6
7 8
R6072010100
1 2
3 4
5 6
7 8
30
6R
01
02
00
1
12 4
3 56
78
R606
2010100
1 2
3 4
5 6
7 8
GD6
ENBXG4
CLK2
ENBXG2
GD5
GD9
BT
UO
CD
DIRY
LSG_CS
GD1
CLXOUTG
DIRXGN
BF
ER
V
NRG
FE
RV
ENBXG3
XFRG
PV
3.
3+
GD3
V5
.5
1+
DIRXG
GD7
ENBXG1
GD4
GD8
MONG
DXOUTG
SVREFH
DATA2
CLYOUTG
GD0
FRPG
SHCLKG
VMID
SVREFL
DYOUTG
STSQOG
GD2
I601
L3E06100D0B
DGND
STBY
CLK
XFR
STSQ
INV
R/L
E/O
SDATA
SCS
SCLK
NC-12
AGNDS
SVREFL
SVREFH
LCCOM
DCOUT
AVCCS
DIRXIN
DIRYIN
NI
YD
NI
YL
C
XR
ID
YR
ID
YD
YL
C
NY
LC
LC
CV
A
NI
GR
N
GR
N
LD
NG
A
NI
NO
M
33
-C
N
TU
ON
OM
NI
XD
NI
1X
BN
E
NI
2X
BN
E
NI
3X
BN
E
NI
4X
BN
E
NI
XL
C
DX
ENBX1
ENBX2
ENBX3
ENBX4
CLX
CKXN
AGND6
VID6
AVCC5
VID5
AGND4
VID4
AVCC3
VID3
AGND2
VID2
AVCC1
VID1
AGND1
PY
B
1V
2V
LF
ER
V
HF
ER
V
CA
DC
CV
A
CA
DD
NG
A
86
-C
N
96
-C
N
0B
D
1B
D
2B
D
3B
D
4B
D
5B
D
6B
D
7B
D
8B
D
9B
D
CC
VD
1V1
CV
2V2
CV
3V3
CV
4V4
CV
5V5
CV 6
V6
CV
7V
7C
V
8V
8C
V
9V
9C
V
01
V
01
CV
11
V
11
CV
21
V
21
CV
31
V
31
CV
41
V
41
CV
51
V
51
CV
61
V
61
CV
71
V
71
CV
81
V
81
CV
91
V
91
CV
02
V0
2C
V1
2V
12
CV
22
V2
2C
V3
2V
32
CV
42
V4
2C
V 52
V5
2C
V
62
V
62
CV
72
V
72
CV
82
V
82
CV
92
V
92
CV
03
V
03
CV
13
V
13
CV
23
V
23
CV
33
V
33
CV
43
V
43
CV
53
V
53
CV
63
V6
3C
V7
3V
73
CV
83
V8
3C
V9
3V
93
CV 04
V0
4C
V
14
V
14
CV
24
V
24
CV
34
V
34
CV
44
V
44
CV
54
V
54
CV
64
V
64
CV
74
V
74
CV
84
V8
4C
V9
4V
94
CV
05
V0
5C
V 15
V1
5C
V
25
V
25
CV3
5V
35
CV
45
V
45
CV
55
V
55
CV
65
V6
5C
V7
5V
75
CV 85
V
85
CV9
5V
95
CV
06
V
06
CV
C622
1.0/16
1 2
C623
33/10MVK/SKV
12
50
01
21
6R
00
1
12
40
6C
50
01
10
0.
01
2
81
52
30
6L 22
H1
2
1005
R69301 2
1005
R6230
1 2
1005
R6300
1 2
APG08
1
C642
1005
5.0p-C
12
1005
R6900
1 2
1005
R691680
1 2
P60152437-30HLow
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
G Panel Part
CLX
VID2
VSSX
VID1
/CLY
VID3
ENB2
DIRY
DIRX
ENB1
DY
VID4
DY
NRG
N.C.
LCCOM
N.C.(NRS1)
VDDY
N.C.(NRS2)
/CLX
VSSY
CLY
VID5
VID6
LCCOM
ENB4
VDDX
DX
ENB3
N.C.(MON)
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 8 (CC9SMN/CC9XMN/CC9XM)0 4
V
9 3V
73V
63V
83V
05V
94V
84V
91V
1 5V
7 5V
65V
53V
14V
85V
0 6V
74V
2 5V
95V
55V
43V
24V
35V
45V
64V
9 2V
0 3V
13V
23V
8 2V
34V
44V
54V
33V
72V
62V
52V
4 2V
32V
22V
12V
81V
71V
61V
11V
2 1V
31V
41V
51V
9V 01V
8V7V6V02
V
5V4V
3V2V
1 V
5 6 46 36 26
1424
3444
6252423 22212
16
550 6
7585
459 5
3565
0493837363534 3332313039 282724797 678 7 5708 7 7
0231
7 191
4181
615 1
63
114
97
215
201
81
25
37 27 17 07 96 8 6 76 6 6
5 464
7484
9405
15
9D
BB
TU
OY
LC
DXOUTB
BDX
BD1
0D
B
FRPB
LSB_CS
ENBXB3
DIRXB
DIRXB
BD3
BENBX2
STSQOB
STSQOB
ENBXB1
BT
UO
YD
7D
B
ENBXB2
DIRXBN
4D
B
LSB_CS
DI
MV
2D
B
YR
ID
B
BENBX4
BENBX1
5D
B
SHCLKB
3B
XB
NE
CLXOUTB
BD7
BT
UO
XD
DATA2
CLYOUTB
3D
B
BD4
6D
B
YL
CB
CLK2
MO
CC
LB
2B
XB
NE
BD2
8D
B
GR
N
DIRXBN
DYOUTB
BD5
BVID6
1B
XB
NE
MONB
1D
B
DIRY
BT
UO
XL
C
NRG
NO
MB
XFRB
BVID5
GR
NB
FRPB
B/CLX
SHCLKB
XFRB
XR
ID
B
VMID
BN
OM
ENBXB4
DIRY
YL
C/
B
4B
XB
NE
BD9
BCLX
BENBX3
BVID4
BD6
DATA2
BVID1
BVID3
YD
B
BVID2
BD8
BD0 BDY
BCLY
B/CLY
BNRG
BENBX1
BENBX2
BENBX3
BENBX4
BDIRX
BCLX
B/CLX
BDX
BVID1
BVID2
BVID3
BVID5
BVID4
BVID6
BDIRY
BDY
BMON
BLCCOM
CLK2
C7060.1/25
12
C7080.1/25
12
21
7C
50
01
52
/1
0.
01
2
11
7C
50
01
52
/1
0.
01
2
01
7C
50
01
52
/1
0.
0
12
C7130.1/25
12
C7030.1/25
12
C7070.1/25
12
C720
21251.0/25-F
C7020.1/25
12
C721
0.1/25
1 2
50
7C
52
/1
.0
12
C701
22/6.3MVK/SKV
12
C70922/16
MVK/SKV1 2
C714
22/16MVK/SKV
1 2
GND1
GND1
81
52
10
7L 22
H1
2
81
52
20
7L 01
H1
2
APB22
1
APB21
1
APB23
1
APB10
1
APB20
1
APB07
1
APB19
1
APB05
1
BR
VH
C1
APB18
1
APB17
1
APB16
1
APB03
1
APB15
1
APB02
1
APB14
1
APB13
1
APB12
1
APB11
1
BD
MP
A1
APB25
1
APB09
1
APB08
1
APB27
1
APB26
1
APB04
1
BD
MH
C1
APB29
1
APB01
1
APB28
1
BR
VP
A1
1005
R708
10
1 2
50
01
11
7R
00
1
12
1005
R713100K
1 2
50
01
10
7R
00
11
2
50
012
07
R0
01
12
1005
R71447K
1 2
1005R70910
1 2
50
01
91
7R
00
1
12
50
014
07
R0
011
2
50
01
50
7R
00
1
12
30
7R
01
02
00
1
12 4
3 56
78
R706
2010100
1 2
3 4
5 6
7 8
R710
201010
1 2
3 4
5 6
7 8
R7072010100
1 2
3 4
5 6
7 8
ENBXB3
SVREFH
BT
UO
CD
DATA2
ENBXB2
STSQOB
BD7
CLYOUTB
NRG
BD9
BD6
BD0
BD3
PV
3.
3+
ENBXB1
CLK2
ENBXB4
DIRY
SVREFL
FRPB
BD8
BD5
VMID
BF
ER
V
MONB
FE
RV
DIRXB
LSB_CS
DXOUTB
SHCLKB
BD1
CLXOUTB
DIRXBN
DYOUTB
V5
.5
1+
XFRB
BD4
BD2
I701
L3E06100D0B
DGND
STBY
CLK
XFR
STSQ
INV
R/L
E/O
SDATA
SCS
SCLK
NC-12
AGNDS
SVREFL
SVREFH
LCCOM
DCOUT
AVCCS
DIRXIN
DIRYIN
NI
YD
NI
YL
C
XR
ID
YR
ID
YD
YL
C
NY
LC
LC
CV
A
NI
GR
N
GR
N
LD
NG
A
NI
NO
M
33
-C
N
TU
ON
OM
NI
XD
NI
1X
BN
E
NI
2X
BN
E
NI
3X
BN
E
NI
4X
BN
E
NI
XL
C
DX
ENBX1
ENBX2
ENBX3
ENBX4
CLX
CKXN
AGND6
VID6
AVCC5
VID5
AGND4
VID4
AVCC3
VID3
AGND2
VID2
AVCC1
VID1
AGND1
PY
B
1V
2V
LF
ER
V
HF
ER
V
CA
DC
CV
A
CA
DD
NG
A
86
-C
N
96
-C
N
0B
D
1B
D
2B
D
3B
D
4B
D
5B
D
6B
D
7B
D
8B
D
9B
D
CC
VD
1V1
CV
2V2
CV
3V3
CV
4V4
CV
5V5
CV 6
V6
CV
7V
7C
V
8V
8C
V
9V
9C
V
01
V
01
CV
11
V
11
CV
21
V
21
CV
31
V
31
CV
41
V
41
CV
51
V
51
CV
61
V
61
CV
71
V
71
CV
81
V
81
CV
91
V
91
CV
02
V0
2C
V1
2V
12
CV
22
V2
2C
V3
2V
32
CV
42
V4
2C
V 52
V5
2C
V
62
V
62
CV
72
V
72
CV
82
V
82
CV
92
V
92
CV
03
V
03
CV
13
V
13
CV
23
V
23
CV
33
V
33
CV
43
V
43
CV
53
V
53
CV
63
V6
3C
V7
3V
73
CV
83
V8
3C
V9
3V
93
CV 04
V0
4C
V
14
V
14
CV
24
V
24
CV
34
V
34
CV
44
V
44
CV
54
V
54
CV
64
V
64
CV
74
V
74
CV
84
V8
4C
V9
4V
94
CV
05
V0
5C
V 15
V1
5C
V
25
V
25
CV3
5V
35
CV
45
V
45
CV
55
V
55
CV
65
V6
5C
V7
5V
75
CV 85
V
85
CV9
5V
95
CV
06
V
06
CV
C722
1.0/16
1 2
C723
33/10MVK/SKV
12
40
7C
50
01
10
0.
01
2
50
01
21
7R
00
1
1281
52
30
7L 22
H1
2
1005
R79301 2
P70154104-30HUp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
C742
1005
5.0p-C12
1005
R7900
1 2
1005
R791680
1 2
B Panel Part
NRG
VDDX
LCCOM
VID2
VID1
DX
/CLX
ENB4
LCCOM
CLX
DY
/CLY
VID6
ENB1
VID3
N.C.
VID5
VSSY
VID4
VDDY
VSSX
N.C.(NRS1)
N.C.(MON)
DY
N.C.(NRS2)
ENB2
ENB3
DIRY
DIRX
CLY
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 9 (CC9SMN/CC9XMN/CC9XM)
4
5
6
3
2
1
4
5
6
3
2
1
45
321
75
76
70 657274 67 6869 6471 6673 63
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
99
89
94
91
96
98
100
93
90
95
92
97
13 20 22 241714 19 21 2316 18153 64 1 1972 5 1 21081
62
88
87
86
85
84
83
82
81
80
79
78
77
61 60 59 58 57 56 55 54 53 52 51
Y
GG
C
54321
CV14
212522/6.3
12
CV5910050.1/10
1 2
88
VC
50
01
01
/1
.01
2
CV58
10050.1/10
1 2
CV10
1005
0.1/101 2
96
VC
50
01
01
/1
.01
2 07
VC
50
01
61
/1
0.
0
12
CV16
10050.1/10
1 2
CV86
100512p-C
1 2
CV65
10050.01/16
12
86
VC
52
12
01
/0
112
CV64
1005
0.1/101 2
26
VC
50
01
61
/1
0.
0
12
00
VC
50
01
C-
p8
612
53
VC
50
01
C-
p8
612
63
VC
50
01
C-
p8
612
CV30
100512p-C
1 2
CV37
100512p-C
1 2
CV34
10050.1/10
1 2
CV02
100512p-C
1 2
62
VC
50
01
C-
p8
612
72
VC
50
01
C-
p8
612
10
VC
50
01
C-
p8
612
59
VC
50
01
p0
74 1
2
22
VC
50
01
C-
p7
4
12
66
VC
50
01
01
/1
.01
2
91
VC
50
01
C-
p7
4
12
CV57
10050.1/10
1 2
83
VC
50
01
01
/1
.0
12
08
VC
50
01
61
/1
0.
0
12
02
VC
50
01
C-
p7
4
12
CV28
10050.1/10
1 2
87
VC
50
01
61
/1
0.
0
12
67
VC
52
12
01
/0
1
12
CV31
212522/6.3
12
CV71
10050.1/10
1 2
76
VC
50
01
61
/1
0.
0
12
CV5610050.001 12
37
VC
50
01
01
/1
.01
2
33
VC
50
01
C-
p2
212
98
VC
50
01
61
/1
0.
0
12
27
VC
52
12
01
/0
112 9
7V
C
50
01
01
/1
.0
12
CV87 0.01/2512
CV48
10050.001
1 2
CV5510050.1/10
1 2
77
VC
50
01
01
/1
.0
12
CV85
100510p-C
1 2
19
VC
50
01
61
/1
0.
0
12
09
VC
50
01
01
/1
.01
2
CV09
212510/6.3
1 2
CV23
10050.1/10
1 2
CV75
10050.1/10
12
38
VC
50
01
61
/1
0.
01
2
28
VC
50
01
01
/1
.01
2
CV07
212510/6.3
1 2
CVC2
212522/6.3
12
CV06
212510/6.3
1 2
CV840.082
12
16
VC
50
01
01
/1
.01
2
CV03
212522/6.3
12
18
VC
50
01
01
/1
.01
2
CV6010050.1/10
1 2
47
VC
52
12
01
/0
112
C1
VC
50
01
C-
p2
212
CV24
10050.1/10
1 2
A1
VC
50
01
p0
741
2
92
VC
3.
6/
74
VK
S/
KV
M
12
39
VC
3.
6/
00
1V
KS
/K
VM
12
36
VC
3.
6/
00
1V
KS
/K
VM
12
29
VC
3.
6/
00
1V
KS
/K
VM
12
49
VC
3.
6/
00
1V
KS
/K
VM
12
2125
HV10SC200JT
123
2125
HV17SC200JT
123
2125
HV08SC200JT
123
2125
HV07SC200JT
123
2125
HV09SC200JT
123
2125
HV06SC200JT
123
GND1
GND1
GND1
GND1
GND1
2518
LV0310 H
1 2
2518
LV04100 H1 2
2518
LV08100 H1 2
2518
LV0210 H
1 2
SLF6028
LV07100 H1 2
2518
LV0110 H
1 2
APVG
1
APVR
1
APSY
1
APVY
1
APVB
1
APCV
1
40
VP
T
1
20
VP
T
1
QV082SA1980UFG
1
2
3
QV17
2SA1980UFG
1
2
3
QV202SC5343UFG
1
23
QV012SC5343UFG
1
23
QV19
2SC5343UFG
1
23
QV092SC5343UFG
1
23
QV072SC5343UFG
1
23
QV04SRC1202EF
1
2
3
QV21SRC1202EF
1
2
3
50
01
67
VR
33
12
50
01
87
VR
33
12
50
01
77
VR
33
12
1005
RV871001 2
1005
RV082.2K-1%1 2
50
01
68
VR
%1
-K
01 1
2
50
01
48
VR
%1
-K
01 1
21005
RV952.2K-1%1 2
1005
RV82270-1%1 2
1005
RV832.2K-1%1 2
1005
RV74270-1%1 2
1005
RV42331 2
50
01
2C
VR
%1
-K
01 1
2
1005
RV54561 2
50
01
1C
VR
K2
.1
12
1005
RVE4331 2
1005
RVC3270-1%1 2
50
01
00
18
3V
R1
2
50
01
13
VR
K2
2
12
50
01
00
18
5V
R1
2
1005
RVE6331 2
1005
RVA8180-1%1 2
1005
RV33100 12
50
01
1E
VR
K2
2
12
50
01
34
VR
08
61
2
1005
RV41331 2
75
RV29
1
1 2
1005
RV91101 2
1005
RVC7101 2
1005
RV18101 2
1005
RV26101 2
1005
RV98101 2
1005
RVC4101 2
1005
RV52101 2
50
01
97
VR
K0
.1
12
50
01
54
VR
08
61
2
1005
RV15
75-1%
1 2
50
01
41
VR
K2
21
2
50
01
5C
VR
K2
21
2
50
01
44
VR
08
61
2
1005
RV90101 2
1005
RVA310K1 2
1005
RV92101 2
50
01
74
VR
K0
1
12
50
01
2E
VR
K2
21
2
50
01
03
VR
K0
.1
12
50
01
23
VR
K0
11
2
1005
RV62331 2
1005
RV16
75-1%
1 2
1005
RV60331 2
RV20
56-1%
1 2
50
01
72
VR
K2
.1
12
50
01
64
VR
K2
21
2
50
01
8C
VR
K2
21
2
50
01
16
VR
K2
2
12
50
01
82
VR
K2
.1
12
1005
RVA51.5K-1%1 2
50
01
71
VR
K2
2
12
50
01
5E
VR
K2
21
2
RV0456-1%1 2
1005
RV89
100
1 2
1005
RV3901 2
50
01
04
VR
02
1
50
01
84
VR
%1
-5
71
2
1005
RV5710K1 2
50
01
65
VR
%1
-5
71
2
50
01
46
VR
08
6
12
1005
RV13
75-1%
1 2
1005
RV6510K1 2
1005
RVA4331 2
1005
RV34100 12
50
01
15
VR
%1
-5
71
2
50
01
6C
VR
K0
.1
12
50
01
9C
VR
K0
11
2
50
01
4G
VR
01
12
50
01
3G
VR
07
4
12
1005
RVA90
1 2
1005
RV990
1 2
1005
RV75220
1 2
50
01
39
VR
01
12
50
01
2F
VR
K2
21
2
50
01
86
VR
00
11
2
50
01
3F
VR
K0
11
2
1005
RVF4561 2
1005
RVG101 2
50
01
9F
VR
07
41
2
50
01
2G
VR0
12
50
01
5F
VR
08
61
2
1005
RVF12201 2
17
VR
01
02
33
12 4
3 56
78
RVA6
2010
331 2
3 4
5 6
7 8
2A
VR
01
02
33
12 4
3 56
78
RV59
201033
1 2
3 4
5 6
7 8
RVA7
2010
331 2
3 4
5 6
7 8
1A
VR
01
02
33
12 4
3 56
78
RGB.V-INV
DSUB1_B
GCLK
I2CCLK
I2CDAT
DSUB1_R
RESETN
VFIELD
F_SD/HD
+5V
DSUB1_G
RGB.H-INV
GVS
GHS
XV01
28.63636MHz
SMD-49
1
2
GND1
1005
RV01331 2
1005
RV02331 2
1005
RV03331 2
50
01
50
VR
K0
11
2
GND1
RGB_COMP
GND1
1005
RV09331 2
1005
RV06331 2
1005
RV07331 2
GND1
GND1
GND1
GGE7
GGE6
GGE5
GGE4
3E
GG
2E
GG
1E
GG
0E
GG
4E
RG
6E
RG
7E
RG
5E
RG
7E
BG
6E
BG
4E
BG
5E
BG
GRE0
GRE1
GRE2
GRE3
GBE0
GBE1
GBE2
GBE3
GND1
GND1GND1
GND1
GND1
GND1
GND1
GND1
40
VC
50
01
01
/1
.0
12
50
VC
50
01
01
/1
.0
12
21
VC
50
01
01
/1
.0
12
1005
RV0H
100
1 2
50
01
53
VR
K0
11
2
50
01
73
VR
K0
11
2
79
VC
50
01
12
1005
RV0F01 2
1005
RV0G01 2
50
01
66
VR
K0
11
2
54
VC
P0
1C
50
01 1
2 24
VC
P0
1C
50
011
2 04
VC
P0
1C
50
011
2
71
VC
50
01
61
/1
0.
0 12
81
VC
50
01
61
/1
0.
0 12
51
VC
50
01
61
/1
0.
0 12
1005
RV2156
1 2
GND1
GND1
GND1
RV2218-1%1 2
RV23
18-1%
1 2
IV02
SN74LVC1G97DCK
In1
GND
In0 Y
VCC
In2
IV08
SN74LVC1G97DCK
In1
GND
In0 Y
VCC
In2
GND1
52
VC
10
.0
B5
00
112
31
VC
10
.0
B5
00
11212
VC
10
.0
B5
00
1 12
GND1
50
01
42
VR
08
6
12
GND1
GND1
GND1
2125
HV02SC200JT
123
2125
HV01SC200JT
123
1005
RV53270K1 2
1005
RV55270K1 2
L1_IN
R1_IN
APL1
1
APR1
1
05
VC
3.
6/
00
1V
KS
/K
VM
12
+4.0V
GND1
89
VC
3.
6/
0.
1
12
30
VI
CS
C8
11
11
KT tn
oc
V
DN
G
tu
oV
pN
ni
V
35
VC
52
12
3.
6/
011
2
GND1
GND1
0B
HC1
0G
HC1
0R
HC1
1B
HC1
1G
HC1
1R
HC1
0B
CV
HC
10
YV
HC1
0R
CV
HC
1
1Y
HC1
1R
CH
C11
BC
HC1
GO
SH
C1
YO
SH
C1
FP
LH
C1
1C
SH
C1
1V
HC1
1Y
SH
C15
00
1
94
VR
%1
-K
01
12
GND1
15
VC
3.
6/
22
VK
S/
KV
M
12
1005
RV6701 2
1608
LV09600 H1 2
1608
LV06600 H1 2
IV04ADV7401KSTZ-140
23
P
13
P
TN
I
SH
/S
C
5-
DN
GD
6-
OI
DD
VD
51
P
41
P
31
P
21
P
11
-D
NG
D
21
-D
DV
D
92
P
82
P
TU
O_
CN
YS
/L
FS
2K
LC
S
71
-D
NG
D
81
-O
ID
DV
D
2A
DS
11
P
01
P
9P
8P
72
P
7P
P6
P5
P4
P26
P25
P24
P23
P22
P21
DCLK_IN
LLC1
XTAL1
XTAL
DVDD-39
DGND-40
P3
P2
P1
P0
P20
ELPF
PVDD-47
PVDD-48
AGND-49
AGND-50
BF
GO
S
7N
IA
1N
IA
8N
IA
2N
IA
9N
IA
3N
IA
1T
SE
T
06
-D
NG
A
1Y
PA
C
2Y
PA
C
DD
VA
TU
OF
ER
LM
C
66
-D
NG
A
SA
IB
1C
PA
C
2C
PA
C
0T
SE
T
01
NI
A
4N
IA
11
NI
A
5N
IA
21
NI
A
AIN6
SOY
RESET
DE_IN
ALSB
SDA
SCLK
P40
P39
VS_IN
HS_IN
P38
P37
DGND-89
DVDD-90
P19
P18
P17
P16
P36
P35
P34
FIELD/DE
VS
P33
23
VC
52
12
3.
6/
011
2
69
VC
3.
6/
0.
1
12
25
VC
3.
6/
00
1V
KS
/K
VM
12
+3.3VAD
DSUB2_R
DSUB2_G
DSUB2_B
50
01
2H
VR
%1
-5
71
2 1005
RVH4101 2
1005
RVH6101 2
1005
RVH5101 2
50
01
1H
VR
%1
-5
71
2
GND1
50
01
3H
VR
%1
-5
71
2
APSC
1
EV02YKC21-4199N
11
22
33
44
EV01
YKC22-0491N
44
33
11
22
55
66
77
88
99
1010
1111
50
01
7H
VR
08
6
12
50
01
8H
VR
08
6
12
50
01
9H
VR
08
6
12
IV01BA00BC0WFP
LT
C
CC
V
DN
G
TU
O C
50
01
63
VR
%1
-K
2.
8 12
50
01
52
VR
%1
-K
2.
8 12
1005
RV692.7K 12 1005
RV72
2.7K
12
QV002SA1980UFG
1
2
3
QV162SA1980UFG
1
2
3
QV152SA1980UFG
1
2
3
QV02
2SA1980UFG
1
2
3
QV03
2SA1980UFG
1
2
3
QV06
2SA1980UFG
1
2
3
QV12SRC1202EF
1
2
3
QV13SRC1202EF
1
2
3
QV11SRC1202EF
1
2
3
QV32SRC1202EF
1
2
3
QV31SRC1202EF
1
2
3
QV33SRC1202EF
1
2
3
QV34SRC1202EF
1
2
3
G
R
B
0
1
OFF(HD)
480i/p,576i/p
Inverter
Inverter
1
0 Component
RGB
RGB_COMP
F_SD/HD
3.3V
1.8V-AD
212mA
12mA
83mA 1.8V
VS
HS
Y
Cr
Cb
R
L
CVBS
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 10 (CC9SMN/CC9XMN/CC9XM)
5678
4321
-+
-+
+-
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
-+
-+
+-
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
654321
211101987
4
5
3
2
1
4
5
3
2
1
4
5
3
2
1
4
5
3
2
1
4
5
3
2
1
4
5
3
2
1
50
01
24
SR
%1
-5
71
2
ES103114-15FA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
G1
G2
50
01
78
SR
00
11
2
52
12
54
SH
TJ
00
2C
S
123
CS43
212510/6.3
1 2
50
01
18
SR
K7
42
1
1005
RS291001 2
52
12
71
SH
TJ
00
2C
S
123
DSUB1_G
1005
RS27
1001 2
1005
RS32560-1%1 2
CS44
10051.0p-C
1 21005
RS62560-1%1 2
50
01
91
SR
K2
.8
12
50
01
96
SR
%1
-5
71
2
50
01
81
SR
K2
.8
12
APH
1
10
SI
IJ
20
CW
42
TA
C
0A
1A
2A
AD
Ss
sV
LC
S
PW
cc
V
1005
RS5301 2
CS40
2125
10/6.312
AGND
50
01
13
SR
%1
-0
65 1
2
50
01
36
SR
%1
-0
651
2
CS16
10051.0p-C
1 2
APR
1
50
01
31
SR
%1
-5
71
2
52
12
41
SH
TJ
00
2C
S
123
50
01
41
SR
K3
31
2
1005
RS65560-1%12
CS13
212510/6.3
1 2
52
12
44
SH
TJ
00
2C
S
123
70
SR
01
020
12 4
3 56
78 50
01
10
SR
K7
41
2
ES203114-15FA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
G1
G2
2125
HS42SC200JT
123
CS11
212510/6.3
1 2
1005
RS0647K1 2
1005
RS3975-1%1 2
QS01SRC1202EF
1
2
3
RGB.V-INV
CS45
10051.0p-C
12
50
01
86
SR
%1
-5
71
2
APDG
1
50
01
06
SR
K0
1
12
1005
RS821001 2
50
01
71
SR
K2
.8
12
APCL
1IS10
EL8302IU
INA+
CEA
VS-
CEB
INB+
NC-6
CEC
INC+ INC-
OUTC
NC-11
INB-
OUTB
VS+
OUTA
INA-
50
01
82
SR
K0
1
12
DSUB1_R
2518
LS0010 H
1 2
1005
RS040
1 2
AGND
50
01
38
SR
K0
11
2
1005
RS2101 2
1005
RS2201 2
50
01
34
SR
%1
-5
71
2
1005
RS240
1 2
DSUB1_B
1005
RS3775-1%1 2
APV21
50
01
64
SR
K3
31
2
2125
HS11SC200JT
123
AGND
RGB.H-INV
50
01
88
SR
00
11
250
01
14
SR
%1
-5
71
2
APDA
1
2125
HS41SC200JT
123
1005
RS64560-1%1 2
1005
RS0547K1 2
CS12
212510/6.3
1 2
AGND
2125
HS43SC200JT
123
1005
RS34560-1%1 2
1005
RS3875-1%1 2
CS46
10051.0p-C
1 2
+5V50
01
90
SR
65
12
50
01
76
SR
%1
-5
71
2
APV1
50
01
94
SR
K2
.8
12
AGND
10
SC
50
01
01
/1
.0
12
APH2
1
1005
RS5201 2
QS02SRC1202EF
1
2
3
AGND
50
01
33
SR
%1
-0
651
2
50
01
68
SR
K0
11
2
50
01
21
SR
%1
-5
71
2
1005
RS250
1 2
1005
RS2301 2
50
01
54
SR
K3
31
2
APG2
1
2125
HS12SC200JT
123
IS40EL8302IU
INA+
CEA
VS-
CEB
INB+
NC-6
CEC
INC+ INC-
OUTC
NC-11
INB-
OUTB
VS+
OUTA
INA-
50
01
20
SR
00
11
2
+3.3VAD
1005
RS5101 2
CS14
10051.0p-C
1 2
50
01
16
SR
%1
-0
65 1
2
50
01
61
SR
K3
31
2
2125
HS15SC200JT
123
50
01
85
SR
K0
1
12
CS41
212510/6.3
1 2
50
01
74
SR
K2
.8
12
APB2
1
APB
1
50
01
03
SR
K0
1
12
50
01
80
SR
65
12
1005
RS36560-1%1 2
50
01
44
SR
K3
31
2
1005
RS35560-1%12
1005
RS260
1 2
RGB1/2
1005
RS66560-1%1 2
50
01
84
SR
K2
.8
12
APG
1
50
01
30
SR
K0
11
2
APR2
1
2125
HS13SC200JT
123
00
SC
3.
6/
74
VK
S/
KV
M
12
+5V
CS42
212510/6.3
1 2
CS10
2125
10/6.312
APDG2
15
21
2
61
SH
TJ
00
2C
S
123
CS15
10051.0p-C
12
1005
RS841001 2
50
01
11
SR
%1
-5
71
2
50
01
51
SR
K3
31
2
10
SS
00
73
91
JU
PS
1 2 3 4 5 6
7 8 9 01
11
21
DSUB2_B
DSUB2_R
DSUB2_G
50
01
45
SR0
12
50
01
65
SR0
12
50
01
55
SR0
12
RGB2_IN/OUT
IS12SN74LVC1G126DCK
OE
A
GND Y
Vcc
CS22
1005
0.01/16
12
IS11SN74LVC1G126DCK
OE
A
GND Y
Vcc
GND1
CS21
1005
0.01/16
12
CS24
1005
0.01/16
12
CS23
1005
0.01/16
12
GND1
IS14SN74LVC1G126DCK
OE
A
GND Y
Vcc
IS13SN74LVC1G126DCK
OE
A
GND Y
Vcc
IS41SN74LVC1G126DCK
OE
A
GND Y
Vcc
IS42SN74LVC1G126DCK
OE
A
GND Y
Vcc
GND1
CS51
1005
0.01/16
12
CS52
1005
0.01/16
12
1005
RS9201 2
1005
RS9101 2
50
01
98
SR
K0
1
12
1005
RS851001 2
1005
RS9001 2
35
SC
50
01
C-
p7
4125
2S
C
50
01
C-
p7
412
62
SC
50
01
C-
p7
412
45
SC
50
01
C-
p7
412
82
SC
50
01
C-
p7
412
72
SC
50
01
C-
p7
412
1005
RS931001 2
1005
RS941001 2
1005
RS971001 2
1005
RS981001 2
1005
RS951001 2
1005
RS961001 2
GND1
QS03DTA114YKA
1
2
3
50
01
08
SR
00
11
2
50
01
97
SR
00
11
2
50
01
99
SR
00
11
2
1005
RS572201 2
1005
RS712201 2
1005
RS592201 2
1005
RS722201 2
50
01
37
SR
0
12
50
01
47
SR
0
12
V
GND
B
GND
GND
SYNC
TU
O/
2
NI
B
GR
G/Y
B
SDA
SCL
PLUG
RR
VCLK
GND
GND
G/Y
L:RGB1/H:RGB2
G
B
R
WS
T
UO
/2
ni
B
GR
G
H
V
B
R
1
NI
B
GR
G/Y
GND
H
SCL
GNDR
B
GND
GND
PLUG
R
GNDV
B
G/Y
SYNC
VCLK
SDA
H
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 11 (CC9SMN/CC9XMN/CC9XM)
C3B3A3
C2B2
C1B1A1
4
6
5
2
8
7
3
1
24
23
22
21
20
19
18
17
16
15
14
1312
11
10
9
8
7
6
5
4
3
2
1
54321
IA02TPA6203A1GQV
1A
-O
V 1B
NW
OD
TU
HS 1C
SS
AP
YB
B2
GND
C2IN+
3AD
DV
3B+
OV
3C-
NI
CA191.0/10
12
42
AC
01
/7
4.
0
12
10
AC
50
01
C-
p0
01 1
2
CA22
0.47/10
12
02
AC
01
/7
4.
01
2
30
AC
50
01
C-
p0
011
2 40
AC
50
01
C-
p0
011
2
62
AC
50
01
F-
61
/1
.0
12
CA181.0/10
12
20
AC
50
01
C-
p0
01 1
2
52
AC
3.
6/
74
VK
S/
KV
M1
2
2125
LA06SC200JT
123
2125
LA08SC200JT
123
GND1
GND1
2125
LA15
MPZ2012S101A
1 2
2125
LA14MPZ2012S101A
1 2
2518
LA132.2 H
12
APAO-
1
APAL1
1
APAR3
1
APAG
1
APAL3
1
APAO+
1
APAR11
1005
RA185.6K-1%1 2
50
01
30
AR
K0
72
12
50
01
50
AR
K0
72
12
1005
RA121.0K-1%
1 2
50
01
40
AR
K0
72
12
50
01
91
AR
%1
-K
28
12
50
01
60
AR
K0
72
12
1005
RA111.0K-1%
1 2
1005
RA1782K-1%
1 2
50
01
61
AR
%1
-K
6.
51
2
50
01
51
AR
%1
-K
6.
51
2
A_GND
GND1
80
AC
01
/0
.11
2
51
AC
3.
6/
74
VK
S/
KV
M
12
70
AC
01
/0
.11
2
71
AC
61
/7
4
VK
S/
KV
M
12
1608
LA01BLM18BD471SN1D
1 2
1608
LA03BLM18BD471SN1D
1 2
DATA-A
CLK-A
50
01
02
AR
K8
6
12
50
01
K8
61
2A
R 12
32
AR
01
020
12
34
56
78
2125
LA02SC200JT
123
2125
LA04
SC200JT
123
1608
LA05BLM18BD471SN1D
1 2
1608
LA07BLM18BD471SN1D
1 2
1608
LA11
BLM18BD471SN1D
1 2
2125
LA12SC200JT
123
2125
LA10SC200JT
123
1608
LA09
BLM18BD471SN1D
1 2
50
AC
50
01
C-
p0
011
2 60
AC
50
01
C-
p0
011
2
50
01
10
AR
K0
72
12
50
01
20
AR
K0
72
12
3216
LA16
600 H1 2
3216
LA17600 H1 2
1005
RA07 4.7K
1 2
1005
RA08 4.7K
1 2
1005
RA09 4.7K
1 2
1005
RA10 4.7K
1 2
50
01
K0
.1
41
AR 1
2
50
01
K0
.1
31
AR 1
2
TP-R
1
TPGND1
1
TP-L
1
GND1
CA14 1.0/101 2
CA13 1.0/101 2
CA12 1.0/101 2
CA11 1.0/101 2
CA10 1.0/101 2
CA09 1.0/101 2
61
AC
50
01
01
/1
.0 1
2
GND1
1005
RA241001 2
1005
RA251001 2
POWER5
+17V
1005
RA2710K
1 2
EA01
HSJ1003-01-010
1
2
3
4
5
6
7
8
R1_IN
L1_IN
MUTE
1005
RA340
1 2
1005
RA330
1 2
03
AC
01
/0
01
VK
S/
KV
M
12
92
AC
50
01
01
/1
.0
12
13
AC
3.
6/
00
1V
KS
/K
VM
12
+6.6V
QA032SD2114K
1
23
QA022SD2114K
1
23
82
AC
52
/7
4
VK
S/
KV
M
12
50
01
82
AR
K0
01
12
1005
RA292.2K
1 2
50
01
03
AR
K2
21
2
50
01
13
AR
K7
.4
12
50
01
23
AR
K7
.4
12
IA01BD3870FS
VIN1
VIN2
SEL2
SEL1
A1
A2
B1
B2
C1
C2
FILTER
GND SC
SD
VCC
OUT2
OUT1
BOUT1
BNF1
BOUT2
BNF2
TNF2
TNF1
CAP
QA062SC5343UFG
1
23
QA072SC5343UFG
1
23
QA05DTC114EE
1
2
3
50
01
93
AR
K0
01
12
1005
RA4710K
12
1005
RA41100
1 2
1005
RA421001 2
+5V
EASPZH-02H
1
2
2518
LA18100 H
1 2
IA03
BA00BC0WFP
LT
C
CC
V
DN
G
TU
O C
50
01
73
AR
%1
-K
01 1
25
00
1
63
AR
%1
-K
51 1
25
00
1
53
AR
%1
-K
51 1
2
50
01
K2
.2
22
AR 1
2
72
AC
3.
6/
7.
4
12
CA21
1005
680p1 2
32
AC
50
01
p0
86
12
CA32 0.33/101 2
CA33 0.00221 2
CA34 0.00221 2
50
01
34
AR0
12
50
01
44
AR0
12
1005
RA455.6K
1 2
1005
RA465.6K
1 2
CA35
0.1/16-F
1 2
CA360.1/16-F1 2
CA370.1/16-F
1 2
CA38
0.1/16-F
1 2
GND1
50
AD
B0
.2
SZ
DU
12
40
AD
B0
.2
SZ
DU
12
1005
RA265.6K
1 2
1005
RA385.6K
1 2
QA012SA1980UFG1
2
3
DA01
SDS511
12
20
AD
11
5S
DS 1
2
30
AD
11
5S
DS
12
40
AQ
GF
U0
89
1A
S2
1
2
3
short pin:Llong pin:R
Audio OUT
RGB Audio IN
Connects with
a Speaker
Audio input Test Pin
RGB Audio R - in
R - out
L - out
Audio +5V
Audio GND
RGB Audio L - in
5V
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 12 (CC9SMN/CC9XMN/CC9XM)
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
28
27
26
25
24
23
22
21
20
19
18
17
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2125
LK02SC200JT
123
40
KC
01
/0
.1 1
2
30
KC
01
/0
.1 1
2
RK021001 2
RK063.3K1 2
2125
LK29600 H
12
APK3
1
2125
RK222201 2
1608
LK24600 H
12
82
KR
M0
.1
12
1608
LK04600 H
12
RK261001 2
APK1
1
2125
LK23SC200JT
123
10
KC
01
/0
.1
12
RK3001 2
2125
LK01SC200JT
123
13
KR
K7
42
1
APRD
1
IK01DS14C232CM
C1+
V+
C1-
C2+
C2-
V-
Dout2
Rin2 Rout2
Din2
Din1
Rout1
Rin1
Dout1
GND
VCC
52
KC
F-
52
/1
.0
12
CK22
1.0/10
12
IK21RRX6000-0702L
VSS1
OSC1
OSC2
VREG
VDD
PTD0
PTD1
PTD2
PT03
PTD4
PTE1/TCH0
PTE3/D+
PTE4/D-
PTC0 /IRQ
PTD6
PTD5
PTA7
PTA6
PTA5
PTA4
PTE2/TCH1
PTE0/TCLK
PTA3
PTA2
PTA1
PTA0
/RST
2125
LK22SC200JT
123
GND1
EK013175-09M
1
2
3
4
5
6
7
8
9
G1
G2
GK
PA 1
RK04100 12
23
KR
K0
11
2
APTD
1
72
KC
01
/0
.11
2
20
KC
01
/0
.1 1
2
12
KD
11
5S
DS1
2
GND1
RK271001 2
EK21UBB-4R-D14C
11
22
33
44
G1G1
G2G2
62
KC
01
/0
.11
2
12
KC
01
/0
.11
2
DK22
SDS511
1 2
APK2
1
RK052.2K 12
6MHzLK25
1
2
3
RK031001 2
42
KC
F-
52
/1
.0
12
APSG
1
2125
RK232201 2
1608
LK03600 H
12
+5V
RMT
TXD
RXD
50
KC
3.
6/
74
VK
S/
KV
M
12
RK010
1 2
2125
LK21SC200JT
123
RK21470
1 2
32
KD
2B
MU
1.
5D
R
21
52
KR
00
11
2
42
KR
K2
.1
12
CK23
0.1/25-F
1 2
QK21DTA114YKA
1
2
3
QK22DTC114EKA
1
2
3
92
KR0
12
+5V
RMT
RXD
TXD
USB MOUSE
TD
RD
RS232C
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly MAIN 13 (CC9SMN/CC9XMN)
11
12
13
14
15
16
17
18
19
20
10
9
8
7
6
5
4
3
2
15
6
7
8
4
3
2
1
65
64
63
62
44 43 42 41
26
25
24
23
22
21
61
60 55575859 5456 53
40
39
38
37
36
35
34
33
32
31
30
29
28
2774
79
76
78
75
80
77
13 201714 1916 18153 64 1 1972 5 1 21081
52
73
72
71
70
69
68
67
66
51 50 49 48 47 46 45
5
6
7
8
4
3
2
1D6
D7
D3
D5
D2
D1
D4
D0
D0
D1
D2
D3
D4
D5
D6
D7
IE02SN74LVC541APW
OE1
A1
A2
A3
A4
A5
A6
A7
A8
GND Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
OE2
VCC
CE200.1/16
12
12
EC
52
12
3.
6/
011
2
CE08
1005
0.01/161 2
CE06
1005
12p-C1 2
CE07
1005
12p-C
1 2
50
EC
50
01
61
/1
0.
0
12
61
EC
61
/1
.01
2
CE03
10050.01/16
1 2
CE19
1005
0.01/161 2
CE02
10050.01/16
1 2
CE04
10050.01/16
1 2
10
EC
50
01
61
/1
0.
0
12
51
EC
50
01
61
/1
0.
0
12
71
EC
61
/1
.01
2
01
EC
3.
6/
22
VK
S/
KV
M
12
3216
LE14C1V222-2A
123
3216
LE13C1V222-2A
123
3216
LE10C1V222-2A
123
GND1
GND1 GND1
GND1
IE12MXD2020EL
1 Tout
2Douty
3 GND
4
ad
V
5Doutx
6Vref
7Sck
8
DD
V
CHKE131
IE01TE7780
13
P
2-
SS
V
23
P
33
P
43
P
53
P
63
P
73
P
83
P
51
P
61
P
21
-S
SV
71
P
81
P
12
P
22
P
32
P
42
P
5P
6P
P7
P8
VDD-23
X1
VSS-25
X2
A0
A1
A2
A3
A4
CLK
VDD-33
P25
P26
P27
P28
D0
D1
D2
3D
24
-S
SV
DR
#
EC
#
RW
#
1P
2P
3P
4P
11
P
21
P
25
-S
SV
31
P
41
P
55
-D
DV
65
-D
DV
0E
DO
M
1E
DO
M
0v
eD
1v
eD
VSS-61
RST
VSS-63
AVD
AI1
AI2
AI3
AI4
VR
AVS
Select
VSS-72
VDD-73
D4
D5
D6
D7
Wakeup
#INT
#Invalid
1005
RE53
330
1 2
1005
RE154.7K
1 2
50
01
61
ER
K3
.3
12
50
01
60
ER0
12
50
01
50
ER
0
12
20
ER
M0
.1
12
50
01
40
ER
33
12
1005
RE29
1.8K-1%
1 2
1005
RE4301 2
50
01
24
ER0
12
1005
RE221001 2
1005
RE4101 2
1005
RE46331 2
1005
RE45331 2
50
01
30
ER
33
12
%1
-K
86
25
ER
12
1005
RE0133
1 2
1005
RE25
10K
1 2
1005
RE2410K
1 2
RE44
201033
1 2
3 4
5 6
7 8
RE23
2010
331 2
3 4
5 6
7 8
TEA1
TEA2
TEA3
TEA4
TEA5
TEWRN
PCS0
+3.3V
TERDN
CPU-RESET
EXTINT
15
ER
TJ
27
4H
B4
61
GC
TN
K7
.4
5
12
XE0114.7456MHz
FCX-03
1
2
50
ED
B9
.3
SZ
DU 1
24
0E
DB
9.
3S
ZD
U 12
1005
RE2610K
1 2
1005
RE0710K
1 2
1005
RE0810K
1 2
81
EC
50
01
61
/1
0.
0
125
00
1
82
ER
K0
11
2
45
ER
01
02K0
1
12 4
3 56
78
55
ER
01
02K0
1
12 4
3 56
78
RE56
201010K
1 2
3 4
5 6
7 8
RE57
201010K
1 2
3 4
5 6
7 8
85
ER
01
02K0
1
12
34
56
78
95
ER
01
02K
01
12
34
56
78
3216
LE25C1V222-2A
123
3216
LE26C1V222-2A
123
GND1
2125
LE151000 H1 2
2125
LE161000 H1 2
1608
LE17600 H1 2
1608
LE18600 H1 2
1608
LE19600 H1 2
1608
LE20600 H1 2
1608
LE21600 H1 2
1608
LE22600 H1 2
1608
LE23600 H1 2
1608
LE24600 H1 2
50
01
16
ER
33
12
50
01
26
ER3
3
12
50
01
36
ER
K3
.3
12
70
ED
B9
.3
SZ
DU 1
26
0E
DB
9.
3S
ZD
U 12
50
01
00
14
6E
R12
50
01
00
15
6E
R1
2
50
01
66
ER
00
1
12
+1.5V
50
01
76
ER
K0
11
2
1005
RE681001 2
D0
D1
D2
D3
D4
D5
D6
D7
APE011
APE031
APE041
APE051
APE061
APE07 1
APE081
APE091
APE101
APE11 1
APE121
APE13 1
2X
RK
HC
12
XT
KH
C1
1X
RK
HC
11
XT
KH
C1
RR
EK
HC
1Y
BS
KH
C1
PS
MK
HC
1
1005
RE390 1 2
1005
RE400
1 2
1005
RE4733
1 2
D-RESET
LED-TEMP11005
RE85
1001 21005
RE84
1001 2LED-LAMP1
LED-N-Y1
50
01
06
ER
K0
1
12
50
01
07
ERK
01
12
50
01
23
ER
K0
.1
12
GND2
90
ED
03
-L
35
0B
R
12
FAN+15POW
3216
LE27C1V222-2A
123
96
ER0
01
02
12 4
3 56
78
IE03SC4517AIMSTRT
BST
IN
SW
GND EN
FB
COMP
SYNC
DE08SDS511
12
QE01SRC1202EF
1
2
3
52
EC
50
01
C-
p0
01
12
42
EC 50
01
51
00
.01
2
50
01
53
ER
%1
-K
11 1
2
50
01
43
ER
%1
-k
8.
612
50
01
63
ER
%1
-K
01
12
62
EC
61
23
52
/7
.4
12
SLF6028
LE284.7 H
1 2
01
ED
B9
.3
SZ
DU
21
1005
RE31 4.7K1 2
CE230.1/25
12
22
EC
61
23
52
/2
.2
12
RE30
0
2010
1 2
3 4
5 6
7 8
EE01ZH-13H
1
2
3
4
5
6
7
8
9
10
11
12
13
RE38
20100
1 2
3 4
5 6
7 8
1005
RE83
1001 2
3.3V
3.3V
GND
GND
1.5V
M_RESET
RXD1
TXD1
RXD2
TXD2
MSLEEP
SBUSY
ERR
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly NETWORK 1 (CC9SMN/CC9XMN)
4
5
3
2
1
4
5
3
2
1
E5
NS7520
M13
P1
R1
N2M3
R2M4
R3
N4
P5
R4
M5
N5
P6
R6
N6
M6
R7
P8
N7
M7
R9
N8
N9
M9
P10
R10
N10
M10
A2
A1
B3C4
A9D9
C9B9
D6C6B6
D5B5C5A4B4
C8D8A8
C7
A6
M14
C2
N14
P15M12
D3
E2
D1
B1D4
C1
E3
G2
F2
E1F3
F4
G3
H3
H1
G4G1
H2
H4
K2
J2
J1J3
K1
K3
N1
L3
L4L1
L2
M11
P11
R12
P13R14
N11
M11
N15
M15
L13
K14
K12
B7
D7
A10
D14B15
B13A15
NS7520
E15
E14
F13
E12
G14
F12
G13
F15
G12
H15
H13H12
J14
J12
J13J15
D11A11
B11A12
A13B12
B10
D10
R13
P12
D12D15
C15
C12
A14
C10
R15
N12
A5A7
C3N13
A3
K4
N3
F14
K15G15
R11
P7
P9M8
L14
C13
P4
D2
J4F1
NS7520
C11
E13
B14D13
P14P2
K13
B2
R5P3
B8
H14
M2
E4
L12
L15
C14
R8
4
5
6
3
2
1
43
21
D31
D28
D25
D22
D19
31
LP
T
D30
D29
D27
D26
D24
D23
D21
D20
D18
D17
NA0
NA9
NA10
NA11
NA12
NA13
NA14
NA15
NA16
NA17
NA18
NA19
NA20
NA21
NA22
P_MDC
P_MDIO
P_TXEN
P_TXD3
P_TXD2
P_TXD1
P_TXD0
NA22
NA21
NA20
NA19
NA18
NA17
NA16
NA15
NA14
NA13
NA12
NA11
NA10
NA9
NA8
NA7
NA6
NA5
NA4
NA3
NA2
NA1
NA0
SD_BA0
SD_A9
SD_A8
SD_A7
SD_A6
SD_A5
SD_A4
SD_A3
SD_A2
SD_A1
SD_A0
NA23
SD_BA1
D16
D0
D2
D1
D3
D5
D8
D11
D15
D14
D12
D9
D6
D7
D4
D13
D10
D14
D3
D10
D6
D13
D2
D9
D5
D12
D1
D8
D15
D4
D11
D0
D7
D31
D30
D29
D28
D27
D26
D25
D24
D23
D22
D21
D20
D19
D18
D17
D16
NA10
NA21
NA22
NA11
NA9
NA8
NA7
NA6
NA5
NA4
NA3
NA2
SD_A3
SD_A2
SD_A1
SD_A0
SD_A4
SD_A5
SD_A6
SD_A7
SD_A8
SD_A9
SD_BA0
SD_BA1
P_TXCLK
P_RXCLK
P_COL
P_RXER
P_CRS
P_RXDV
P_RXD3
P_RXD2
P_RXD1
P_RXD0
NA3
NA4
NA2
NA1
NA5
NA6
NA7
NA8
10
LP
A1
NW_RXD1
IL02SN74LVC1G08DCK
A
B
GND Y
Vcc
TPL22
1
1005
RL0501 2
1005
RL07330-1%1 2
1005
RL061.0M1 2
20
LC
50
01
C-
p0
112
72
LP
T1
42
LP
T1
03
LP
T1
33
LP
T1
63
LP
T1
93
LP
T1
04
LP
T1
60
LC
50
01
61
/1
.01
2 70
LC
50
01
61
/1
.01
2 80
LC
50
01
61
/1
.01
2 90
LC
50
01
61
/1
.01
2
2125
LL221000 H1 2
11
LC
50
01
61
/1
.01
201
LC
50
01
61
/1
.01
2
1005
RL10101 2
1005
RL118201 2
1005
RL128201 2
1005
RL138201 2
31
LC
50
01
61
/1
.0
12
1005
RL2315K-1%1 2
1005
RL2415K-1%1 2
2A
LP
T1
RL25
2010
331 2
3 4
5 6
7 8
TPLA4
1
20
LP
A1
2125
LL03600 H1 2
30
LP
A1
40
LP
A1
50
LP
A1
60
LP
A1
90
LP
A1
01
LP
A1
11
LP
A1
21
LP
A1
2125
LL13600 H1 2
31
LP
A1
NW_TXD1
NW_RXD2
NW_TXD2
MSLEEP
SBUSY
ERR
GND1
GND1
21
LC
50
01
61
/1
.0
12 4
1L
C
50
01
61
/1
.0
12 5
1L
C
50
01
61
/1
.0
12 6
1L
C
50
01
61
/1
.0
12
GND1
GND1
91
LC
50
01
61
/1
.0
12 0
2L
C
50
01
61
/1
.0
12 3
2L
C
50
01
61
/1
.0
121
2L
C
50
01
61
/1
.0
12 2
2L
C
50
01
61
/1
.0
12
50
01
20
LR
K0
11
2
3.3V
NW_RESET
52
LP
T1
43
LP
T1
73
LP
T1
13
LP
T1
62
LP
T1
53
LP
T1
83
LP
T1
92
LP
T1
23
LP
T1
82
LP
T1
14
LP
T1
24
LP
T1
34
LP
T1
44
LP
T1
54
LP
T1
64
LP
T1
74
LP
T1
84
LP
T1
94
LP
T1
05
LP
T1
15
LP
T1
25
LP
T1
35
LP
T1
45
LP
T1
55
LP
T1
50
01
62
LR
K0
11
2
TPL561
75
LP
T1
SD_CLK
SD_CS
EXT_CS
RTC_CS
F_CS
EXT_RW
WE
OE
BE3
BE2
TPL581
95
LP
T1
06
LP
T1
16
LP
T1
26
LP
T1
46
LP
T13
6L
PT1
56
LP
T1
66
LP
T1
RL15
2010
331 2
3 4
5 6
7 8
TPL69
1 TPL70
1
TPL71
1
TPL72
1
TPL751
TPL761
RL19
2010
33
1 2
3 4
5 6
7 8
RL20
2010
33
1 2
3 4
5 6
7 8
RL21
2010
331 2
3 4
5 6
7 8
97
LP
T1
08
LP
T1
18
LP
T1
87
LP
T12
8L
PT1
58
LP
T14
8L
PT1
38
LP
T16
8L
PT1
98
LP
T18
8L
PT1
78
LP
T10
9L
PT1
39
LP
T12
9L
PT1
19
LP
T14
9L
PT1
79
LP
T16
9L
PT1
59
LP
T18
9L
PT1
1A
LP
T19
9L
PT1
TPLA3
1
GND1
NW_RXD1
NW_I2C_DAT
NW_I2C_CLK
SBUSY
NW_TXD1
ERR
MSLEEP
NW_RXD2
NW_TXD2
TPLA6
1
TPLA71
TPLA9
1 TPLC11
50
01
10
LR
K0
11
25
00
1
30
LR
K0
11
2
TPL23
1
3216
HL01C1V222-2A
123
3216
HL02C1V222-2A
123
D15
D14
D13
D12
D11
D10
D9
D7
D8
D6
D5
D4
D3
D2
D1
D0
SD_RAS
SD_CAS
SD_WE
SD_A10
NA22
NA21
NA20
NA19
NA18
NA17
NA16
NA15
NA14
NA13
NA12
NA11
NA10
NA9
NA8
NA7
NA6
NA5
NA4
NA3
NA2
NA1
NA0
SD_A5
SD_A9
SD_A8
SD_A3
SD_A4
SD_A7
SD_A2
SD_A1
SD_BA0
SD_A6
SD_A0
P_CRS
P_TXD3
P_RXD3
P_RXER
P_COL
P_RXCLK
P_RXD2
P_RXD1
P_RXD0
P_MDIO
P_TXD2
P_TXD1
P_TXCLK
P_TXEN
P_MDC
P_TXD0
P_RXDV
10
LC
50
01
61
/1
.01
2
70
LP
A1
80
LP
A1
50
01
28
LR
K0
11
2
50
01
38
LR
K0
11
2
48
LR
01
02
K0
11
2 43 5
6
78
58
LR
01
02
K0
11
2 43 5
6
78
3.3V
50
01
72
LR
K7
.2
12
50
01
1E
LR
K7
.2
12
1005
RLE2331 2
1005
RLE3331 2
1005
RLE4331 2
F_OE
F_WE
1005
RLE5331 2
1005
RLE7331 2
1005
RLE6331 2
1005
RLE0331 2
1005
RLF1331 2
1005
RLF2331 2
1005
RLF3331 2
GND1
1005
RLF610K1 2
1005
RLF710K1 2
1005
RLF810K1 2
IL12SN74LVC1G14DCK
NC
A
GND Y
Vcc
BE1
BE0
1608
LL06600 H1 2
1608
LL10600 H1 2
1608
LL07600 H1 2
1608
LL11600 H1 2
1608
LL08600 H1 2
1608
LL05600 H1 2
1608
LL09600 H1 2
1608
LL12600 H1 2
SD_BA1
D20
D29
D19
D28
D18
D27
D17
D26
D16
D25
D23
D24
D22
D31
D21
D30
1005
RLG4331 2
1005
RLG5331 2
1005
RLG6331 2
50
01
9G
LR
K7
.2
12
1005
RLG001 2
50
01
1H
LR0
12
1005
RLF0561 2
1005
RLE8561 2
1005
RLE9561 2
1005
RLF9561 2
XL01
18.432MHzSMD-49
1 2
50
LC
61
/0
1V
KS
/K
VM
12
42
LC
61
/0
1V
KS
/K
VM
12
52
LC
61
/0
1V
KS
/K
VM
12
71
LC
61
/0
1V
KS
/K
VM
12
81
LC
61
/0
1V
KS
/K
VM
12
1005
RLH2101 2
1005
RLH3101 2
1005
RLH4101 2
1005
RLH5101 2
1005
RLH6101 2
1005
RLH7101 2
10
LP
T1
TPL02
1
TPL03
1
TPL04
1
TPL05
1
TPL06
1
TPL07
1
TPL08
1
TPL09
1
TPL10
1
TPL11
1
TPL12
1
TPL13
1
TPL14
1
TPL15
1
TPL16
1
TPL17
1
TPL18
1
TPL19
1
TPL20
1
TPLB11
EL02ZH-08V
1
2
3
4
5
6
7
8
RTC_INTR
TPLA81
50
01
3J
LR
02
21
2
QL01DTC114YKA
1
2
3
1005
RLJ81001 2
1005
RLJ91001 2
1005
RLK11001 2
1005
RLK21001 2
1005
RLK31001 2
IL01NS7520B-1-C36
A10 RESET_
D7 BR_
B7 BUSY_
K14 XTALA1
K12 XTALA2
N15 PLLTST_
M15 BISTEN_
L13 SCANEN_
M11 NC1P11 NC2N11 NC3R12 NC4R14 NC5P13 NC6
N1 D31M1 D30L3 D29L2 D28L4 D27L1 D26K3 D25K2 D24
J2 D22J3 D21J1 D20H3 D19H4 D18H1 D17H2 D16G4 D15G1 D14G3 D13G2 D12F4 D11F2 D10F3 D9
K1 D23
E2 D7E3 D6D1 D5C1 D4B1 D3D4 D2D3 D1C2 D0
N14 TDIM12 TMSP15 TCKM14 TRST_
M13TDO
P1A0
N2A1
M3A2
R1A3
N4A4
M4A5
R2A6
R3A7
R4A8
N5A9
P5A10
M5A11
N6A12
P6A13
M6A14
R6A15
N7A16
R7A17
M7A18
P8A19
N8A20
M9A21
R9A22
N9A23
R10A24
M10A25/BLAST_
P10A26/CS0WE_
N10A27/CS0OE_
A2CAS0_
B3CAS1_
C4CAS2_
A1CAS3_
E1 D8
B9BE0_
C9BE1_
A9BE2_
D9BE3_
B6OE_
C6WE_
D6RW_
D5CS0_
B5CS1_
C5CS2_
A4CS3_
B4CS4_
C8TEA_
D8TA_
A8TS_
C7BG_
A6BCLK
E5 NC7
IL01NS7520B-1-C36
N12 XTALB1
R15 XTALB2
C10 TXCLK
C12 RXCLK
A14 TXCOL
C15 RXERD12 RXCRSD15 RXDV
D14 RXD3B15 RXD2A15 RXD1B13 RXD0
E14C0/TXCKB
E12C1/CTSB_
E15C2/DSRB_
F13C3/RXDB
F12C4/RXCKB
F15C5/RTSB_
G14C6/DTRB_
G13C7/TXDB
G12A0/TXCKA
H13A1/CTSA_
H15A3/RXDA
J12A4/RXCKA
J15A5/RTSA_
J13A6/DTRA_
J14A7/TXDA
A11TXD0
D11TXD1
B11TXD2
A12TXD3
A13TXER
B12TXEN
B10MDIO
D10MDC
R13NC-R13
H12A2/DSRA_
P12NC-P12
IL01NS7520B-1-C36
R8 VDD1L14 VDD2C14 VDD3C13 VDD4
L15 PLLVDD
L12 PLLVSS
D2 GND1F1 GND2J4 GND3P4 GND4P7 GND5M8 GND6P9 GND7
R11 GND8K15 GND9G15 GND10 E13GND11
D13GND12
B14GND13
C11GND14
A7GND15
A5GND16
P2GND18
P14GND19
K13GND20
C3OSCVDD2
N13OSCVDD1
R5OVDD6
P3OVDD5
N3OVDD4
M2OVDD3
K4OVDD2
B2GND17
E4OVDD1
H14OVDD7
A3OVDD10
B8OVDD9
F14OVDD8
50
01
4K
LR
K0
11
2
50
01
5K
LR
K0
.1
21
50
01
6K
LR
K0
1
21
1005
RLK701 2
LED_ACT
IL14SN74LVC1G97DCK
In1
GND
In0 Y
VCC
In2
1005
RLM21001 2
1005
RLM30
1 2
1005
RLK84701 2
50
01
9K
LR
K0
1
21
SL01SKRAAAE010
1 2
3 4
1A
LC
F-
01
/0
.1
12
50
01
1M
LR0
12
30
LC
50
01
C-
p2
112
DL05SML-210DT
12
EL01ZH-13H
1
2
3
4
5
6
7
8
9
10
11
12
13
5F
LC
50
01
61
/1
0.
0
12
6F
LC
50
01
61
/1
0.
0
12
50
01
5F
LR
K7
.2
12
50
01
4F
LR
K7
.2
12
50
01
4M
LR
K7
.2
12
50
01
5M
LR
K7
.2
12
50
01
6M
LR
K7
.2
12
3.3V
3.3V
GND
1.5V
M_RESET
RXD1
TXD1
RXD2
TXD2
MSLEEP
SBUSY
ERR
GND
TDI
TMS
TCK
ICE_RST
3.3V
GND
TD0
ICE_TRST
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly NETWORK 2 (CC9SMN/CC9XMN)
11
12
13
14
15
16
17
18
19
20
10
9
8
7
6
5
4
3
2
1
CK
Q
D
CLRCKCLR
D
Q
CK
Q
D
CLRCKCLR
D
Q
CK
Q
D
CLRCKCLR
D
Q
D
Q
CKCLR
D
CKCLR
Q
11
12
13
14
15
16
17
18
19
20
10
9
8
7
6
5
4
3
2
1
4
5
3
2
1
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
26
27
2524
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
54
53
51
52
50
49
47
48
46
45
4443
42
41
40
39
38
36
37
35
34
33
83
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
84
85
86
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
26
27
2524
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
901
1121
3141
5 161
87
65
43
21
1G2G
8
7
6
5
4
3
2
1
NA16
NA15
NA14
NA13
NA12
NA11
NA10
NA9
NA20
NA19
NA18
NA8
NA7
NA6
NA5
NA4
NA3
NA2
D23
D30
D22
D29
D21
D28
D19
D26
D18
D25
D17
D24
D16
NA17
NA17
D20
NA21
D31
D27
D24
D25
D27
D28
D29
D30
D31
D26
D31
D30
D29
D28
D24
D25
D26
D27
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
SD_BA0
SD_A9
SD_A8
SD_A7
SD_A6
SD_A5
SD_A4
SD_A3
SD_A2
SD_A1
SD_A0
NA22
NA0
NA1
NA2
NA3
NA4
NA5
NA6
NA7
NA8
NA9
NA10
NA11
NA12
NA13
NA14
NA15
NA16
NA17
NA18
NA19
NA20
NA21
D0
D1
D2
D3
D4
D5
D6
D7
D16
D17
D18
D19
D20
D21
D22
D23 D24
D25
D26
D27
D28
D29
D30
D31
SD_A3
SD_A4
SD_A5
SD_A6
SD_A7
SD_A8
SD_A9
D8
D9
D10
D11
D12
D13
D14
D15
SD_BA0
SD_BA1
SD_BA1
D16
D17
D18
D19
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
NA1
SD_A0
SD_A1
SD_A2
GND1
3.3V
03
LC
50
01
61
/1
.01
292
LC
50
01
61
/1
.01
282
LC
50
01
61
/1
.01
272
LC
50
01
61
/1
.01
262
LC
50
01
61
/1
.01
2
GND1 GND1 GND1 GND1
GND1
13
LC
50
01
61
/1
.01
2 23
LC
50
01
F-
10
.01
2
GND1GND1
F_WE
F_OE
NW_RESET
F_CS
05
LC
C-
p0
.31
2
1005
RL5710K1 2
84
LR
%1
-2
61
2
1005
RL6401 2
64
LR
%1
-2
61
2
GND1
1005
RL5410K1 2
1005
RL521.0K1 2
15
LC
C-
p0
.31
2
1005
RL673.3K
12
GND1
52
12
62
LL2
1.
0H
12
CL46
10050.1/10
1 2
1005
RL581.0K1 2
CL47
10050.1/10
12
NW_RESET
54
LR
%1
-5
71
2
CL49
10050.1/10
12
1005
RL5510K1 2
1005
RL66331 2
CL48
10050.1/10
12
XL0225.000MHzDSX840GA
1
22
5L
C
50
01
01
/1
.0
12
CL45
10050.1/10
1 2
52
12
52
LL2
1.
0H
12
DL04
SML-210MT
12
44
LR
%1
-5
71
2
1005
RL65331 2
50
01
26
LR
%1
-K
0.
2 12
GND1CL43
10050.1/10
1 2
1005
RL5110K1 2
3.3V
50
01
16
LR
%1
-K
5.
1 12
CL44
10050.1/10
1 2
1005
RL5610K1 2
GND1
1005
RL501.0K1 2
74
LR
%1
-2
61
2
CL42
10050.1/10
1 2
94
LR
%1
-2
61
2
1005
RL312.7K1 2
1005
RL322.7K1 2
1005
RL332.7K1 2
3.3V
EXT_CS
EXT_RW
IL09SN74LVC541APW
OE1
A1
A2
A3
A4
A5
A6
A7
A8
GND Y8
Y7
Y6
Y5
Y4
Y3
Y2
Y1
OE2
VCC
IL10SN74LV273APW
CLR
1Q
1D
2D
2Q
3Q
3D
4D
4Q
GND CLK
5Q
5D
6D
6Q
7Q
7D
8D
8Q
VCCNW_RESET
RL68
2010
3312
34
56
78
17
LR
01
02
K0
11
2 43 5
6
78
96
LR
01
02
K0
11
2 43 5
6
78
37
LR
01
02
K0
11
2435
6
78
07
LR
01
02
K0
11
2 43 5
6
78
50
01
36
LR
M0
.1
12
IL08SN74LVC1G32DCK
1
A
2
B
3GND
4
Y
5Vcc
50
01
08
LR
K0
11
2
GND1
1005
RL34
0
1 2
6E
LP
T1
5E
LP
T1
3216
HL03C1V222-2A
123
65
LC
02
54
R7
X-
K2
/1
00
.0
12
D12
D11
D7
D2
D1
D14
D0
D13
D8
D10
D9
D6
D15
D5
D4
D3
SD_RAS
SD_CAS
SD_A10
SD_A2
SD_A1
SD_A9
SD_BA0
SD_A3
SD_A4
SD_A0
SD_A5
SD_A6
SD_A8
SD_A7
NA17
NA5
NA9
NA19
NA16
NA15
NA14
NA20
NA21
NA22
NA11
NA8
NA3
NA4
NA7
NA13
NA2
NA10
NA1
NA12
NA6
NA0
NA18
53
LC
50
01
61
/1
.01
2
63
LC
50
01
61
/1
.01
27
3L
C
50
01
61
/1
.01
2
93
LR
%1
-5
71
2
04
LR
%1
-5
71
2
14
LR
%1
-5
71
2
83
LR
%1
-5
71
2
45
LC
F-
10
.01
2
35
LC
F-
10
.01
2
CL55
45200.001/2K-X7R
1 2
BE0
BE1
BE2
BE3
50
01
5A
LR
%1
-K
4.
2 12
50
01
6A
LR
%1
-K
4.
2 12
50
01
7A
LR
%1
-K
4.
2 12
50
01
8A
LR
%1
-K
4.
2 12
1005
RLC101 2
1005
RLC21.0K1 2
50
01
4C
LR
%1
-K
4.
2 12
50
01
3C
LR
%1
-K
4.
2 12
SD_BA1
SD_WE
SD_CS
D16
D17
D18
D19
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
1608
LL30600 H1 2
1608
LL31600 H1 2
1608
LL32600 H1 2
1608
LL33600 H1 2
CL57
10050.1/10
1 2
CL58
10050.1/10
1 2
CL59
10050.1/10
1 2
CL60
10050.1/10
1 2
SD_CLK
50
01
18
LR0
12
50
01
06
LR
%1
-K
21 1
2
4E
LP
A1
3E
LP
A1
APLE51
6E
LP
A17
EL
PA1
8E
LP
A1
9E
LP
A1
APLE01
1F
LP
A1
IL05S29JL032H70TFI020D
A15
A14
A13
A12
A11
A10
A9
A8
A19
A20
WE
RESET
NC-13
WP/ACC
RY/BY
A18
A17
A7
A6
A5
A4
A3
A2
A1 A0
CE
VSS-27
OE
DQ0
DQ8
DQ1
DQ9
DQ2
DQ10
DQ3
DQ11
VCC
DQ4
DQ12
DQ5
DQ13
DQ6
DQ14
DQ7
DQ15/A-1
VSS-46
BYTE
A16
33
LC
61
/0
1V
KS
/K
VM
12
P_CRS
P_TXD2
P_RXD3
P_RXD2
P_TXEN
P_COL
P_TXD3
P_TXD0
P_RXD1
P_MDIO
P_TXD1
P_RXDV
P_RXCLK
P_TXCLK
P_RXER
P_RXD0
P_MDC
1005
RLG3561 2
1005
RLG2561 2
GND1
IL04EDS6432AFTA-6B-E
VDD-1
DQ0
VDDQ-3
DQ1
DQ2
VSSQ-6
DQ3
DQ4
VDDQ-9
DQ5
DQ6
VSSQ-12
DQ7
NC-14
VDD-15
DQM0
/WE
/CAS
/RAS
/CS
NC-21
BA0
BA1
A0
A1
A2
DQM2
VDD-29
NC-30
DQ16
VSSQ-32
DQ17
DQ18
VDDQ-35
DQ19
DQ20
VSSQ-38
DQ21
DQ22
VDDQ-41
DQ23
VDD-43 VSS-44
DQ24
VSSQ-46
DQ25
DQ26
VDDQ-49
DQ27
DQ28
VSSQ-52
DQ29
DQ30
VDDQ-55
DQ31
NC-57
VSS-58
DQM3
A3
A4
A5
A6
A7
A8
A9
CKE
CLK
NC-69
NC-70
DQM1
VSS-72
NC-73
DQ8
VDDQ-75
DQ9
DQ10
VSSQ-78
DQ11
DQ12
VDDQ-81
DQ13
DQ14
VSSQ-84
DQ15
VSS-86
IL06ICS1893BF
POAC
VSS-2
P1CL
P2LI
VSS-5
P3TD
VDD-7
P4RD
10/100
AMDIX_EN
VSS-11
TP_AP
TP_AN
VDD-14
TP_BN
TP_BP
VSS-17
VDD-18
10TCSR
100TCSR
VSS-21
VDD-22
RESET_N
VDD-24 VSS-25
MDIO
MDC
RXD3
RXD2
RXD1
RXD0
RXDV
VDD-33
RXCLK
RXER
VSS-36
TXCLK
TXEN
TXD0
TXD1
TXD2
TXD3
COL
CRS
VDD-45
REF_OUT
REF_IN
VDD-48
LL27TLA-6T118LF
R1
21
00
CB
87
65
43
21
90
11
12
13
14
15
16
1
30
LE
1-
03
77
55
5
1
2
3
4
5
6
7
82
G1
G
LED_ACT
1005
RLL10
1 2
14
LC
50
01
C-
p0
.81
2 04
LC
50
01
C-
p0
.81
2
DL03
SML-210DT
1 2
1005
RL591.0K1 2
ACT
LINK
A B C D E F G
5
4
3
2
1
6 6
5
4
3
2
1
PWB assembly NETWORK 3 (CC9SMN/CC9XMN)
5
6
7
8
4
3
2
1
4 321
24
23
22
21
20
19
18
17
16
15
14
1312
11
10
9
8
7
6
5
4
3
2
1
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
D31
D30
D29
D28
NA0
NA1
NA2
NA3
50
01
73
LR
K0
.1
12
OE
APLE1 1
3.3V
GND1
EL04ZH-02H
1
2
TPLE3
1
1005
RLG710K1 2
NW_RESET
DL06
RB491D
1
2
3DL021SS355
12
CL34
1005
0.1/1612 8
3L
C
05
/7
.4
VK
S/
KV
M
12
WE
1005
RL3501 2
RTC_CS
TPLE2
1
APLE2 1
TPLE4
1
NA1
NA2
NA0
NA3
D30
D29
D31
D28
RL72
2010
01 2
3 4
5 6
7 8
3.3V
50
01
57
LR
K7
.4
12
NW_I2C_DAT
1005
RL771001 2
IL11M24128-BWMN6
E0
E1
E2
VSS SDA
SCL
WC
VCC
93
LC
50
01
61
/1
0.
0
12
NW_I2C_CLK
GND1
4E
LC
50
01
61
/1
0.
01
21005
RL761001 2
50
01
47
LR
K7
.4
12
5E
LC
50
01
61
/1
0.
01
2
1005
RLH81001 2
1005
RLH91001 2
50
01
1J
LR
M0
.1
12
RTC_INTR
CLE8
1005
0.1/1612
CLE9
1005
0.1/1612
1F
LC
50
01
61
/1
.0
12
50
01
4J
LR
K0
11
2
50
01
6J
LR
K7
.4
12
3F
LC
50
01
61
/1
0.
01
2
2F
LC
50
01
61
/1
0.
01
2
50
01
5J
LR
K7
.4
12
1005
RLJ201 21005
RLJ71001 2
30
LX
S6
2-
XM
Dz
HK
86
7.
23
A
3-
CN
2-
CN
B
IL07RTC-7301SF
CS0
FCON
FOUT
VTEMP
IRQ
A0
A1
A2
A3
RD
GND WR
D3
D2
D1
D0
CS1
VDD
IL13R2051S02-E2
NC-1
VSB
CLKOUT
SCL
SDA
NC-6
VDCC
VSS CIN
INTR
NC-11
OSCOUT
OSCIN
NC-14
VDD
VCC
CLE7
10053.0p-C
1 2
CLE6
10053.0p-C
1 2
1608
LL34600 H1 2
1608
LL35600 H1 2
4F
LC
50
01
61
/1
0.
0
12
DL07
1SS355
1 2
50
01
63
LR
00
11
2
MEMO
CP-S245(CC9SMN)/CP-X255/ED-X8255(CC9XMN)//PJ656(CC9XM)
PWB assembly BATTERY
PWB assembly REMOTE
POWER UNIT BALLAST 1
POWER UNIT BALLAST 2
POWER UNIT CIRCUIT
PWB assembly MAIN 1
PWB assembly MAIN 2
PWB assembly MAIN 3
PWB assembly MAIN 4
PWB assembly MAIN 5
PWB assembly MAIN 6
PWB assembly MAIN 7
PWB assembly MAIN 8
PWB assembly MAIN 9
PWB assembly MAIN 10
PWB assembly MAIN 11
PWB assembly MAIN 12
PWB assembly MAIN 13
PWB assembly NETWORK 1
PWB assembly NETWORK 2
PWB assembly NETWORK 3
Basic circuit diagram list
Hitachi, Ltd. Tokyo, Japan International Sales Division
THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome,
Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111
HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: [email protected]
HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: [email protected]
HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Feldkirchen bei München GERMANY Tel: +49-89-991 80-0 Fax: +49-89-991 80-224 Hotline: +49-180-551 25 51 (12ct/min) Email: [email protected]
HITACHI EUROPE S.A. Gran Via Carlos III, 86, planta 5
Edificios Trade - Torre Este08028 Barcelona
SPAIN
Tel: +34 93 409 2550
Fax: +34 93 491 3513
Email: [email protected]
HITACHI EUROPE srl Via Tommaso Gulli N.39, 20147 Milano, Italia ITALY Tel: +39 02 487861 Tel: +39 02 38073415 Servizio Clienti Fax: +39 02 48786381/2 Email: [email protected]
HITACHI Europe AB Box 77 S-164 94 Kista SWEDEN Tel: +46 (0) 8 562 711 00 Fax: +46 (0) 8 562 711 13 Email: [email protected]
HITACHI EUROPE S.A.S Lyon Office B.P. 45, 69671 BRON CEDEX FRANCE Tel: +33 04 72 14 29 70 Fax: +33 04 72 14 29 99 Email: [email protected]
HITACHI EUROPE LTD (Norway) AB STRANDVEIEN 18 1366 Lysaker NORWAY Tel: 67 5190 30 Fax: 67 5190 32 Email: [email protected]
HITACH EUROPE AB Egebækgård Egebækvej 98 DK-2850 Nærum DENMARK Tel: +45 43 43 6050 Fax: +45 43 60 51 Email: [email protected]
HITACHI EUROPE AB Neopoli / Niemenkatu 73 FIN-15140 Lahti FINLAND Tel : +358 3 8858 271 Fax: +358 3 8858 272 Email: [email protected]
Hitachi Europe Ltd Bergensesteenweg 421 1600 Sint-Pieters-Leeuw BELGIUMTel: +32 2 363 99 01 Fax: +32 2 363 99 00 Email: [email protected]
HITACHI EUROPE LTD Na Sychrove 975/8 101 27 Pr aha 10 – Bohdalec CZECH REPUBLIC Tel: +420 267 212 383 Fax: +420 267 212 385 Email: [email protected]
www.hitachidigitalmedia.com