hmc783lp6ce - analog devices

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or [email protected]

PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 1

HMC783LP6CEFRACTIONAL-N PLL WITH

INTEGRATED VCO, 11.5 - 12.5 GHz

v03.0411

Functional Diagram

Features• rF Bandwidth: 11.5 gHz to 12.5 gHz

• Fractional or Integer Modes

• Ultra Low Phase noise 12 gHz; 50 MHz ref. -95 / -99 dBc/Hz @ 10 kHz (Frac / Int) -134 dBc/Hz @ 1 MHz (Open Loop)

• Figure of Merit (FOM) -221 / -226 dBc/Hz (Frac / Int)

• 24-bit Step Size, resolution 3 Hz typ

• 225 MHz, 14-bit reference path input

• direct FSK Modulation Mode

• Cycle Slip Prevention

• read / Write Serial Port, Chip Id

• 40 Lead 6 x 6 mm SMt Package: 36 mm²

Typical Applications

• VSat radio

• Point-to-Point / Multi-Point radio

• test equipment & Industrial Control

• Military end-Use

• Phased array applications

[1] Please refer to the pin description table for details

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D



PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 2

General Descriptionthe HMC783LP6Ce is a fully functioned Fractional-n Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled Oscillator (VCO). the input reference frequency range is 100 kHz to 220 MHz while the advanced delta-sigma modulator design in the fractional PLL allows both ultra-fine step sizes and very low spurious products. the highly integrated structure provides excellent phase noise performance over temperature, shock and process. the HMC783LP6Ce is packaged in a leadless QFn 6 x 6 mm surface mount package. the output power is 11 dBm typical, making the HMC783LP6Ce ideal for driving the LO port of many of Hittite’s Hi Linearity and I/Q mixer products.

For theory of operation and register map refer to the “PLLs w/ Integrated VCO - Microwave VCOs” Operating Guide. To view the Operating Guide, please visit www.hittite.com and choose HMC783LP6CE from the “Search by Part Number” pull down menu.

HMC783LP6CEv03.0411

FRACTIONAL-N PLL WITHINTEGRATED VCO, 11.5 - 12.5 GHz

Parameter Condition Min. typ. Max. Units

RF Output Characteristics

VCO Output Frequency range 11.5 12 12.5 gHz

VCO Output Power 5 15 dBm

VCO tuning Voltage 2 13 V

VCO tuning Sensitivity VtUne = +5V 160 MHz/V

Frequency Pulling (into a 2:1 VSWr) 8 MHz pp

Frequency Pushing VtUne = +5V 6 MHz/V

Frequency drift rate 1.2 MHz/ °C

Sub Harmonic (1/2) 30 dBc

Harmonic (2nd) 24 dBc

Harmonic (3rd) 40 dBc

VCO SSB Phase noise @ 100 kHz Offset (Open Loop)VtUne = +5V

Fvco = 12 gHz-110 dBc/Hz

Synthesizer In-Band SSB Phase noise @ 10 kHz Offset (Frac/Int)

Fref = 50 MHz Fvco = 12 gHzLoop BW = 100 kHz

-95 / -99 dBc/Hz

Synthesizer normalized In-Band SSB Phase noise Floor (Frac/Int)

-221 / -226 dBc/Hz

Synthesizer Fractional Spurs [1] -65 dBc

Synthesizer Frequency Settling time (100 MHz Step)From 12.1 gHz to 12 gHz

Loop BW = 100 kHz104 μs

16-Bit divider range (Int) n divider ratio 216+31 32 65567

16-Bit divider range (Frac) n divider ratio 216-1 36 65535

REF Input Characteristics

Max ref Input Frequency (3.3V) 200 225 MHz

Min ref Input Frequency 100 200 kHz

ref Input Sensitivity aC Coupled 500 700 mVpp

Max ref Input dC Coupled 0 VddIO V

ref Input Capacitance 5 pF

14-Bit ref divider range 16383 1

Electrical Specifications, TA = +25° C; VCCVCO, VDDCP, VCCCP = +5V; AVCC, VCCPS VDDPFD, AVDD, RVDD, DVDD, DVDDM, DVDDQ, VDDIO = +3.3V; AGND = DGND = 0V

[1] actual spur level is dependent on loop parameters and will increase at division ratios closest to integer boundaries. number listed is average value.





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 3

Parameter Condition Min. typ. Max. Units

Phase Detector

Max Phase detector Frequency (Frac) 70 105 MHz

Max Phase detector Frequency (Int) 140 160 MHz

Min Phase detector Frequency 100 kHz

Charge Pump

Max Output Current 2 ma

Min Output Current 500 µa

Charge Pump noise Input referred 50 MHz ref. -145 dBc/Hz

Logic Inputs

VIH Input High Voltage VddIO-0.4 VddIO V

VIL Input Low Voltage 0 0.4 V

Logic Outputs

VOH Output High Voltage VddIO-0.4 VddIO V

VOL Output Low Voltage 0 0.4 V

Serial Port Max Clock 50 MHz

Power Supply Voltages

analog 3.3V Supplies: aVCC, VddPFd, aVdd, rVdd, VCCPS

aVdd must equal dVdd 3 3.3 3.45 V

digital Internal Supplies: dVdd, dVddQ, dVddM 3 3.3 3.45 V

digital I/O Supplies: VddIO Logic I/O 1.8 3.3 5.5 V

analog 5V Supplies: VCCVCO, VddCP, VCCCP VCCCP must equal VddCP 4.75 5 5.25 V

Power Supply Currents

total Current Consumption (5V) 145 190 ma

total Current Consumption (3.3V) 90 110 ma

Power down Current [1]CSP disabled 1 10 µa

CSP enabled 450 µa

Bias Reference Voltage Measured with 10 gΩ meter 1.880 1.920 1.960 V

[1] refers only to the Synthesizer portion of the HMC783LP6Ce

HMC783LP6CEv03.0411


Electrical Specifications (Continued)





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 4

HMC783LP6CEv03.0411


SSB Phase Noise vs. Frequency, Integer Mode

SSB Phase Noise vs. Temperature @ 12 GHz, Integer Mode

SSB Phase Noise vs. Reference Freq. & Loop BW @ 12 GHz, Integer Mode

SSB Phase Noise Fractional Spurs @ 12.002 GHz

Example of Cycle Slip Prevention Hop from 12.2 to 11.7 GHz

-150

-140

-130

-120

-110

-100

-90

-80

-70

-60

102 103 104 105 106 107

11.5 GHz 12.0 GHz 12.5 GHz

OFFSET FREQUENCY (Hz)

PH

AS

E N

OIS

E (

dBc/

Hz)

Temp = 25CFref = 50 MHzLoop BW = 100 kHz

-150

-140

-130

-120

-110

-100

-90

-80

-70

-60

102 103 104 105 106 107

Fref = 10MHz Loop BW= 10kHz

Fref = 50MHz Loop BW=100kHz


PH

AS

E N

OIS

E (

dBc/

Hz)

102 103 104 105 106 107-150

-140

-130

-120

-110

-100

-90

-80

-70

-60


PH

AS

E N

OIS

E (

dBc/

Hz)

Temp = 25CFref = 50 MHzLoop BW = 100 kHz

-20 -10 0 10 20 30 40 50 60 70 80

11.6

11.7

11.8

11.9

12

12.1

12.2

12.3

FR

EQ

UE

NC

Y (

GH

z)

TIME (μSEC)

CSP ON

CSP OFF

-150

-140

-130

-120

-110

-100

-90

-80

-70

-60

102 103 104 105 106 107

+25 C+85 C -40 C


PH

AS

E N

OIS

E (

dBc/

Hz)

Fref = 50 MHzLoop BW = 100 kHz

Typical Reference Sensitivity vs. Frequency, 3.3V [1]

-50

-40

-30

-20

-10

0

10

20

0 50 100 150 200 250 300

FREQUENCY (MHz)

R = Max, +25C

R = 3, +85C

R = Max, +85C

R = 3, +25C

SE

NS

ITIV

ITY

(dB

m)

[1] r refers to the reference path division ratio





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 5

HMC783LP6CEv03.0411


Open Loop VCO SSB Phase Noise @ Vtune = +5V

Open Loop VCO SSB Phase Noise vs. Tuning Voltage

-140

-120

-100

-80

-60

-40

-20

0

1 2 3 4 5 6 7 8 9 10 11 12 13

10KHz Offset 100KHz Offset

SS

B P

HA

SE

NO

ISE

(dB

c/H

z)

TUNING VOLTAGE (V)

-160

-140

-120

-100

-80

-60

-40

-20

0

103 104 105 106 107

+25C+85C -40C

SS

B P

HA

SE

NO

ISE

(dB

c/H

z)

OFFSET FREQUENCY (GHz)

Frequency vs. Tuning Voltage, T = 25°C

Sensitivity vs. Tuning Voltage, Vcc = +5V

Frequency vs. Tuning Voltage, Vcc = +5V

Output Powervs. Tuning Voltage, Vcc = +5V

10.4

10.7

11

11.3

11.6

11.9

12.2

12.5

12.8

13.1

13.4

0 1 2 3 4 5 6 7 8 9 10 11 12 13

Vcc=4.75VVcc=5.00VVcc=5.25VO

UT

PU

T F

RE

QU

EN

CY

(G

Hz)

TUNING VOLTAGE (V)

4

5

6

7

8

9

10

11

12

13

14

0 1 2 3 4 5 6 7 8 9 10 11 12 13

+25C+85C -40C

OU

TP

UT

PO

WE

R (

dBm

)

TUNING VOLTAGE (V)

0

100

200

300

400

500

600

700

0 1 2 3 4 5 6 7 8 9 10 11 12 13

+25C+85C -40C

SE

NS

ITIV

ITY

(M

Hz/

V)

TUNING VOLTAGE (V)

10.4

10.7

11

11.3

11.6

11.9

12.2

12.5

12.8

13.1

13.4

0 1 2 3 4 5 6 7 8 9 10 11 12 13

+25C+85C -40CO

UT

PU

T F

RE

QU

EN

CY

(G

Hz)

TUNING VOLTAGE (V)





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 6

HMC783LP6CEv03.0411


Pin Descriptions

Pin number Function description

1, 9 - 13, 22, 36 n/Cno Connection. these pins may be connected to rF/dC ground.

Performance will not be affected.

2 - 4, 7, 37, 39 gnd [1] these pins must be connected to rF/dC ground

5 gndthese pins and package bottom

must be connected to rF/dC ground

8 VCCVCO2 [2]

+5V Power Supply for VCO40 VCCVCO1

6 VtUneControl Voltage Input. Modulation port bandwidth

dependent on drive source impedance.

14 aCgaC ground. this pin must be connected to

an external capacitor to ground.

15 aVCCanalog Power supply pin for the rF Section.

a decoupling capacitor to the ground plane should be placed as close as possible to this pin. nominally 3.3V

16 VddCP +5V Power Supply for charge pump digital section

17 VCCCP +5V Power Supply for the charge pump analog section

18 CP Charge pump output

19 VddPFd analog Power supply for the phase frequency detector, nominally 3.3V

20 BIaS [3] external bypass decoupling for precision bias circuits, 1.920V ±20 mV is generated internally

21 aVdd analog Power supply for analog ref paths, nominally 3.3V

23 reFn reference input (negative or aC coupled to gnd)

24 reFP reference input (Positive)

25 rVdd ref path supply

26 dVddQ digital supply for Substrate, nominally 3.3V

27 Ce Chip enable

28 Sen Serial port latch enable input

29 SCK Serial port clock input

30 SdI Serial port data input

31 dVdd Power supply pin for internal digital circuitry. nominally 3.3V

32 VddIO Power Supply for digital I/O driver

33 Ld_SdOLock detect, Main Serial data Output

or VCO Serial Port data Out

34 VCCPS analog Power Supply for Prescaler, nominally 3.3V

35 dVddM digital Power Supply for M-Counter, nominally 3.3V

38 rFOUt rF output (aC coupled).

[1] this pin is not connected internally, however, this pin must be connected to gnd to maintain product family pin for pin compatibility.

[2] this pin is not connected internally, however, this pin must be connected to Vcc to maintain product family pin for pin compatibility.

[3] BIaS ref voltage (pin 20) cannot drive an external load, and must be measured with a 10 gOhm meter such as agilent 34410a; a typical 10 Mohm dVM will read erroneously.





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 7

HMC783LP6CEv03.0411


Pins equivalent Schematic

rFOUt

VCCVCO1

VtUne

gnd

Sen, Ce, SCK, SdI

Ld_SdO

CP

Pin Schematic Equivalents





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 8

HMC783LP6CEv03.0411


Pin Schematic Equivalents (Continued)

Pins equivalent Schematic

Bias

reFn, reFP





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 9

HMC783LP6CEv03.0411


Evaluation Circuit

DEPOP

DEPOP

ADJ

BPASS

GNDVOUT

VIN

SD

GND

3 FOUT

VC

VDD

DEPOP

DEPOP

DEPOP

DEPOP

DEPOP

DEPOP

ENGND

VOUTVIN

ADJ

BPASS

GNDVOUT

VIN

SD

ENGND

VOUTVIN

ENGND

VOUTVIN

DEPOP

ACG

AVCC

AVDD

BIAS

CE

CP

DVDD

DVDD

M

DVDDQ

GND

LD_S

DO

NC

REFNREFP

RFOU

T

RVDD

SCKSDI

SEN

VCCC

PVC

CPS

VCCVCO2

VDDC

P

VDDIO

VDDP

FD

VTUNE

NC NC

GNDGNDGND

NC

NC

VCCV

CO1

NCNCNC

GND

GND

GND

50 Ohm Trace

LD

+15V

5.5V

GNDRFout 50 Ohm Co-Planar Trace

TCXO

SYNTH

GND

Header to USB Board

GND

REFin

5VCP

5VVCO

5VVCO

1

10

12 13

22

3

363739

4

40

5

7

9

14 15

21

20

27

18

3135

26

2

33

11

2324

38

25

2930

28

1734

8

16

3219

6U1

HMC783LP6CE

C331.5NF

R13182

C373.9NF

3VANALOG

1 2

JP6

3VTCXO

3VDIGITAL

3VANALOG

5VCP

C35100NF

2

3

4

6

7

U5

THS4031IDGN

C5722UF

FB3

1000

FB4

1000

R27DEPOP

C63

1NFC1

1 2

JP4

4

3

16

U6LP5900-3_3V

4

3

16

U2LP5900-3_3V

C1910PF

8

6

1

35

4

U8LP3878MR-ADJ

1 2

JP5

12108642

7531

119

J1

TLW-106-05-T-D3VDIGITAL

SDO

CEN

R6

56

3VANALOG

C30DEPOP

4

3

16

U4LP5900-3_3V

C60

1NF

L1

DEPOP

1 J2

1J3

3VANALOG 3VDIGITAL

SEN

SDISCK

TP4

5016

12

JP3

C44.7UF

C31

100PF

C21

1NF

5VCP

3VANALOG

3VANALOG

12

JP1

R114.02K1

2

JP2

R28

C64

R21

30C62

C613.9NF

R23

0

C391NF

C584.7UF

R14

10K

R15

10K

R22 0R26

R12

R3

1K

R4

620

R25

2

1

4Y2

C34100NF

8

6

1

35

4

U9LP3878MR-ADJ

C27100NF

C2410PF

C23100NF

C2210PF

C1610PF

R24

1NFC38

C65

C324.7UF

C810PF

C12100NF

C1010PF

C1310PF

C210PF

C3100NF

C7100NF

C510PF

C14100NF

R100

R510K

C15

100P

F

3VDIGITAL

C54100NF

C40

100NFR2120

R7120

R9

10

3VTCXO

3VDIGITAL

C671.2NF

C5510PF

C5110PF

C52100NF

R164.02K

3VDIGITAL

CEN

R8100K

C28100NF

C610PF

FB2

1000

SDO

TP5

5016

TP6

5016

C42100NF

C594.7UF

R1100K

TP2

5016

C29

100NF

R411K

C744.7UF

C7310NF

C36100NF

C684.7UF

C20100NF

R404.02K

C11100NF

C174.7UF

C9100NF

C18100NF

C25100NF

C2610PF

C41100NF

TP1

5016

R171K

C484.7UF

C4710NF

C46100NF

C454.7UF

C441.2NF

C43100NF

C50100NF

R1810K

C494.7UF

C56100NF

R1910K

C534.7UF

TP3

5016

FB1

1000R201K

NCNCNCNC

a

e

B

F

C

g

d

H

I

J

K

L

M





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 10

HMC783LP6CEv03.0411


Evaluation Circuit (Continued from page 9)

DEPOP

DEPOP

ADJ

BPASS

GNDVOUT

VIN

SD

GND

3 FOUT

VC

VDD

DEPOP

DEPOP

DEPOP

DEPOP

DEPOP

DEPOP

ENGND

VOUTVIN

ADJ

BPASS

GNDVOUT

VIN

SD

ENGND

VOUTVIN

ENGND

VOUTVIN

DEPOP

ACG

AVCC

AVDD

BIAS

CE

CP

DVDD

DVDD

M

DVDDQ

GND

LD_S

DO

NC

REFNREFP

RFOU

T

RVDD

SCKSDI

SEN

VCCC

PVC

CPS

VCCVCO2

VDDC

P

VDDIO

VDDP

FD

VTUNE

NC NC

GNDGNDGND

NC

NC

VCCV

CO1

NCNCNC

GND

GND

GND

50 Ohm Trace

LD

+15V

5.5V


TCXO

SYNTH

GND

Header to USB Board

GND

REFin

5VCP

5VVCO

5VVCO

1

10

12 13

22

3

363739

4

40

5

7

9

14 15

21

20

27

18

3135

26

2

33

11

2324

38

25

2930

28

1734

8

16

3219

6U1

HMC783LP6CE

C331.5NF

R13182

C373.9NF

3VANALOG

1 2

JP6

3VTCXO

3VDIGITAL

3VANALOG

5VCP

C35100NF

2

3

4

6

7

U5

THS4031IDGN

C5722UF

FB3

1000

FB4

1000

R27DEPOP

C63

1NFC1

1 2

JP4

4

3

16

U6LP5900-3_3V

4

3

16

U2LP5900-3_3V

C1910PF

8

6

1

35

4

U8LP3878MR-ADJ

1 2

JP5

12108642

7531

119

J1


SDO

CEN

R6

56

3VANALOG

C30DEPOP

4

3

16

U4LP5900-3_3V

C60

1NF

L1

DEPOP

1 J2

1J3

3VANALOG 3VDIGITAL

SEN

SDISCK

TP4

5016

12

JP3

C44.7UF

C31

100PF

C21

1NF

5VCP

3VANALOG

3VANALOG

12

JP1

R114.02K1

2

JP2

R28

C64

R21

30C62

C613.9NF

R23

0

C391NF

C584.7UF

R14

10K

R15

10K

R22 0R26

R12

R3

1K

R4

620

R25

2

1

4Y2

C34100NF

8

6

1

35

4

U9LP3878MR-ADJ

C27100NF

C2410PF

C23100NF

C2210PF

C1610PF

R24

1NFC38

C65

C324.7UF

C810PF

C12100NF

C1010PF

C1310PF

C210PF

C3100NF

C7100NF

C510PF

C14100NF

R100

R510K

C15

100P

F

3VDIGITAL

C54100NF

C40

100NFR2120

R7120

R9

10

3VTCXO

3VDIGITAL

C671.2NF

C5510PF

C5110PF

C52100NF

R164.02K

3VDIGITAL

CEN

R8100K

C28100NF

C610PF

FB2

1000

SDO

TP5

5016

TP6

5016

C42100NF

C594.7UF

R1100K

TP2

5016

C29

100NF

R411K

C744.7UF

C7310NF

C36100NF

C684.7UF

C20100NF

R404.02K

C11100NF

C174.7UF

C9100NF

C18100NF

C25100NF

C2610PF

C41100NF

TP1

5016

R171K

C484.7UF

C4710NF

C46100NF

C454.7UF

C441.2NF

C43100NF

C50100NF

R1810K

C494.7UF

C56100NF

R1910K

C534.7UF

TP3

5016

FB1

1000R201K

NCNCNCNC

a

e

B

F

C

g

d

H

I

J

K

L

M





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 11

HMC783LP6CEv03.0411


Evaluation Circuit (Continued from page 10)

DEPOP

DEPOP

ADJ

BPASS

GNDVOUT

VIN

SD

GND

3 FOUT

VC

VDD

DEPOP

DEPOP

DEPOP

DEPOP

DEPOP

DEPOP

ENGND

VOUTVIN

ADJ

BPASS

GNDVOUT

VIN

SD

ENGND

VOUTVIN

ENGND

VOUTVIN

DEPOP

ACG

AVCC

AVDD

BIAS

CE

CP

DVDD

DVDD

M

DVDDQ

GND

LD_S

DO

NC

REFNREFP

RFOU

T

RVDD

SCKSDI

SEN

VCCC

PVC

CPS

VCCVCO2

VDDC

P

VDDIO

VDDP

FD

VTUNE

NC NC

GNDGNDGND

NC

NC

VCCV

CO1

NCNCNC

GND

GND

GND

50 Ohm Trace

LD

+15V

5.5V


TCXO

SYNTH

GND

Header to USB Board

GND

REFin

5VCP

5VVCO

5VVCO

1

10

12 13

22

3

363739

4

40

5

7

9

14 15

21

20

27

18

3135

26

2

33

11

2324

38

25

2930

28

1734

8

16

3219

6U1

HMC783LP6CE

C331.5NF

R13182

C373.9NF

3VANALOG

1 2

JP6

3VTCXO

3VDIGITAL

3VANALOG

5VCP

C35100NF

2

3

4

6

7

U5

THS4031IDGN

C5722UF

FB3

1000

FB4

1000

R27DEPOP

C63

1NFC1

1 2

JP4

4

3

16

U6LP5900-3_3V

4

3

16

U2LP5900-3_3V

C1910PF

8

6

1

35

4

U8LP3878MR-ADJ

1 2

JP5

12108642

7531

119

J1


SDO

CEN

R6

56

3VANALOG

C30DEPOP

4

3

16

U4LP5900-3_3V

C60

1NF

L1

DEPOP

1 J2

1J3

3VANALOG 3VDIGITAL

SEN

SDISCK

TP4

5016

12

JP3

C44.7UF

C31

100PF

C21

1NF

5VCP

3VANALOG

3VANALOG

12

JP1

R114.02K1

2

JP2

R28

C64

R21

30C62

C613.9NF

R23

0

C391NF

C584.7UF

R14

10K

R15

10K

R22 0R26

R12

R3

1K

R4

620

R25

2

1

4Y2

C34100NF

8

6

1

35

4

U9LP3878MR-ADJ

C27100NF

C2410PF

C23100NF

C2210PF

C1610PF

R24

1NFC38

C65

C324.7UF

C810PF

C12100NF

C1010PF

C1310PF

C210PF

C3100NF

C7100NF

C510PF

C14100NF

R100

R510K

C15

100P

F

3VDIGITAL

C54100NF

C40

100NFR2120

R7120

R9

10

3VTCXO

3VDIGITAL

C671.2NF

C5510PF

C5110PF

C52100NF

R164.02K

3VDIGITAL

CEN

R8100K

C28100NF

C610PF

FB2

1000

SDO

TP5

5016

TP6

5016

C42100NF

C594.7UF

R1100K

TP2

5016

C29

100NF

R411K

C744.7UF

C7310NF

C36100NF

C684.7UF

C20100NF

R404.02K

C11100NF

C174.7UF

C9100NF

C18100NF

C25100NF

C2610PF

C41100NF

TP1

5016

R171K

C484.7UF

C4710NF

C46100NF

C454.7UF

C441.2NF

C43100NF

C50100NF

R1810K

C494.7UF

C56100NF

R1910K

C534.7UF

TP3

5016

FB1

1000R201K

NCNCNCNC





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 12

Outline Drawing

Part number Package Body Material Lead Finish MSL rating Package Marking [1]

HMC783LP6Ce roHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3H783XXXX

[1] 4-digit lot number XXXX

Package Information

nOteS:

1. LeadFraMe MaterIaL: COPPer aLLOY

2. dIMenSIOnS are In InCHeS [MILLIMeterS].

3. Lead SPaCIng tOLeranCe IS nOn-CUMULatIVe

4. Pad BUrr LengtH SHaLL Be 0.15 mm MaXIMUM.

Pad BUrr HeIgHt SHaLL Be 0.05mm MaXIMUM.

5. PaCKage WarP SHaLL nOt eXCeed 0.05mm.

6. aLL grOUnd LeadS and grOUnd PaddLe MUSt

Be SOLdered tO PCB rF grOUnd.

7. reFer tO HIttIte aPPLICatIOn nOte FOr

SUggeSted PCB Land Pattern.

Absolute Maximum Ratingsnominal 3.3V Supplies to gnd -0.3V to +3.6V

nominal digital Supply relative to 3.3V analog Supply

-0.3V to +0.3V

nominal 5V Supply to gnd -0.3 to +5.5V

Vtune 0 to +15V

Storage temperature -65 to +150°C

Max Peak reflow temperature 260 °C

eSd Sensitivity (HBM) Class 1a

Reliability InformationJunction temperature to Maintain 1 Million Hour MttF

135 °C

nominal Junction temperature (t=85 °C) 120 °C

thermal resistance (Junction to gnd Paddle, 5V Supply)

48.3 °C/W

Operating temperature -40 to +85°C

HMC783LP6CEv03.0411






PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 13

HMC783LP6CEv03.0411


Evaluation PCB

the circuit board used in the application should use rF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from Hittite upon request.





PLL

S w

/ In

te

gr

ate

d V

CO

- S

Mt

7

7 - 14

Item description

J1 dual row terminal Strip

J2, J3 PCB Mount SMa rF Connector

JP1 - JP6 Single row terminal Strip

C1, C21, C38 - C39, C60 1000 pF Capacitor, 0402 Pkg.

C2, C5, C6, C8, C10, C13, C16, C19, C22, C24, C26, C51, C55

10 pF Capacitor, 0402 Pkg.

C3, C7, C9, C11, C12, C14, C18, C20, C23, C25, C27 - C29, C34 - C36, C40 - C43, C46, C50, C52, C54, C56

0.1 µF Capacitor, 0402 Pkg.

C4, C17, C32, C45, C48, C49, C53, C68, C74

4.7 µF Capacitor, 0805 Pkg.

C15, C31 100 pF Capacitor, 0402 Pkg.

C44, C67 1200 pF Capacitor, 0402 Pkg.

C33 1500 pF Capacitor, 0402 Pkg.

C37 0.039 µF Capacitor, 0603 Pkg.

C47, C73 10,000 pF Capacitor, 0402 Pkg.

C57 22 µF tantalum Capacitor, Case d

C58, C59 4.7 µF tantalum Capacitor, Case B

C61 3900 pF Capacitor, 0402 Pkg.

FB1 - FB4 1000 Ohm 200 ma Ferrite Chip, 0805 Pkg.

r1, r8 100k Ohm resistor, 0402 Pkg.

r2, r7 120 Ohm resistor, 0402 Pkg.

r3, r17, r20, r41 1k Ohm resistor, 0402 Pkg.

r4 620 Ohm resistor, 0402 Pkg.

r5, r14, r15, r18, r19 10k Ohm resistor, 0402 Pkg.



r10, r22, r23 Zero Ohm resistor, 0402 Pkg.

r11, r16, r40 4.02k Ohm resistor, 0402 Pkg.



tP1 - tP6 test Point PC Compact SMt

U1HMC783LP6Ce Fractional-n PLL, with Integrated VCO

U2, U4, U6 Low noise 3.3V, 100 ma Linear regulator

U5 Low noise Op-amp, tHS4031Idgn

U8, U9 5V, 800ma Voltage regulator

Y2 3.3V, 50 MHz VCXO Crystal Oscillator

PCB [2] 125536 evaluation Board

[1] reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: rogers 4350 or arlon 25Fr and Fr4

List of Materials for Evaluation PCB 127272 [1]

HMC783LP6CEv03.0411




hmc783lp6ce - analog devices

Documents