hoa 7320_v06-06_rs
TRANSCRIPT
-
8/22/2019 HOA 7320_v06-06_RS
1/2
MAXLink
H
IG
H
LIG
H
TS Low noise figure enables long distance
transport with minimal signal
degradation
20 dBm High Power Output
Convenient 2-RU form factor
Embedded SNMP agent (v1, v2c, v3)
Support of SCTE HMC MIBs
Embedded Web (HTTP) server for user-
friendly graphical interface
Broadcast Services
HOA 7320
Primary Path
Secondary Path
HOA 7320
Point-to-Point Interconnect
Redundant Ring
HOA 7230 Typical Applications
HOA 7320 1550 nm Optical Amplifier
The Harmonic MAXLink transmission system is a family of transmitters and optical amplifiers designed
for 1550 nm-based network applications. The MAXLink system provides a cost-effective solution for a
variety of applications and architectures, including long haul applications that are beyond the reach
of 1310 nm transmitters and fiber dense architectures which take advantage of high power optica
amplifiers. In addition, this system is ideally suited for new, evolving transport architectures such as
redundant rings, broadcast layer transmission, and hub interconnects used in broadband networks
The MAXLink product line consists of 2-RU rack mount modules for 19 racks, including the HLT series of
broadcast optical transmitters as well as a full range of optical amplifiers. The transmission system has
been designed to complement Harmonics PWRLink 1310 nm DFB transmitter family. Full monitoring and
configuration are available through the embedded SNMP agent and HTTP server.
-
8/22/2019 HOA 7320_v06-06_RS
2/2
MAXLink
Harmonic Inc.
549 Baltic Way
Sunnyvale, CA 94089
U.S.A.
T 1.800.788.1330 or
1.408.542.2500
(outside the U.S.)
F 1.408.542.2510www.harmonicinc.com
O p t i c a l O u t p u t
Wavelength Range 1540 to 1564 nm
Input Power Range -5 to +10 dBmOutput Power1 20 dBm
Optical Power Adjustment Range 4 dB down from maximum
Noise Figure < 4.5 dB at 0 dBm optical input
Optical Return Loss > 40 dB1
Polarization Sensitivity < 0.5 dB
Laser Shutdown Interlock on fiber tray
Connector Type SC/APC or E2000
Pow e ring
AC Version 110/220 V, 50/60 Hz
DC Version -48 V
Consumption 75 W maximum
U s e r I n t e r f a c e
Front Panel LEDs
Power (red,green)
Status on (green)
Laser output enabled (green)
Laser on (green)
Optical Test Point Power Level -3 to 0 dBm
Rear Panel Power Supply Connector
Laser enabled/off switch
Low optical power mode manual switch
LED Laser output enabled
N e t w o r k M a n a g e m e n t
SNMP Protocol v1, v2c, v3
HTTP Protocol HTTP 1.1 (with Web browser-basedauthentication)
E n v i r o n m e n t a l
Operating Temperature Range -0 to +50 C
-32 to +132 F
Storage Temperature -40 to +70 C
Range -40 to +158 F
Maximum Relative Humidity 85%, non-condensing
Phy s ica l
Dimensions (W x H x D) 17.0 x 3.4 x 12.0 (2-RU)
43.2 cm x 8.6 cm x 30.5 cm
Weight 20 lbs / 9.0 kg
Notes:
1. 1550-1560 nm.
2. Amplifier off/output only.
HOA 7320 1550 nm Optical Amplifier
2006 Harmonic Inc. All rights reserved. Harmonic, the Harmonic logo, MAXLink and PWRLink are registered
trademarks or trademarks of Harmonic Inc. The names of other companies and products mentioned herein may
be trademarks of their respective owners. All product and application features and specifications are subject to
change at Harmonics sole discretion at any time and without notice.06/06