34 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

PLA

435 g

d

MK3/S

Summary

This is my remix of the fantastic Hogwarts model by falloutboy2015 .Unfortunately my .4 nozzle couldn't print the original, so I tried some ofthe other remixes.

They were no good. The one I tried failed spectacularly because of slicingproblems. An investigation into the mesh file showed more than 8900errors in the mesh. A massive amount of overlaying edges and faces, aswell as loads of redundant vertices.

So I set about to remake the whole model. This is the one. No errors. It ismanifold. It works on .4 nozzles.

The model is very much simplyfied from the original. I didn't see the pointin having details that couldn't print anyway.

After spending all those hours remaking the model I tip my hat to theoriginal creator. Well done. Cudos to you.

The print you see on the pictures are straight from the printbed. No afterprint work has been done.

Blend file included for those of you who want more detail :)

Loafers Lodge

Hogwarts - myremix

VIEW IN BROWSER

updated 15. 8. 2019 | published 15. 8. 2019

Print Files (.gcode) DOWNLOAD ALL FILES

51.7 MB

34.11 hrs f 0.20 mm k 0.40 mm h PLA 435.00 g d MK3/S

updated 15. 8. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

20.1 MBupdated 15. 8. 2019

29.0 MBupdated 15. 8. 2019

World & scans > Architecture & Urbanism

Straight out of the box. No supports. no nothing.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

hogwarts_02mm_pla_mk3_1d10h7m.gcode

hogwarts-ny7.stl

hogwarts-ny7.blend