honeywell fall prevention and protection training · honeywell fall prevention and protection...

Honeywell Fall Prevention and Protection Training

Learn more! Online: Telephone: Email: In the U.S.: In Canada:

www.honeywellsafety.com/usa/training www.honeywellsafety.com/ca/training

855.565.6722 780.577.5485

[email protected] [email protected]

1

Providing the awareness training essentials for maintaining a safe work environment

Experienced instructors, live demonstrations and hands-on training

Open Enrollment Courses available in over 30 cities in US and Canada

Addresses site-specific variables and performance requirements for a

variety of applications and work site needs

Online booking tool enables customers to review and reserve available

open enrollment courses with a few simple clicks (millerfalltraining.com)

Each participant will receive a certificate after successful course

completion

All courses require a minimum number of participants

AT HEIGHT TRAINING

Fall Protection Rescue (Basic Rescue)

This training course is designed for any supervisor or personnel working at heights in construction or general industry. This

course teaches the basics of self-rescue as well as assisting a fall victim. Participants will expand their rescue skills as well as

better understand the requirements of OSHA, ANSI and CSA as it applies to rescue. Participants will be involved in practical

hands-on work and should dress accordingly.

Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $975 per participant

Fall Protection Rescue (Advance Rescue)

This training course is designed for all personnel who work at heights, particularly on open structures. Individuals are taught

the required skills to safely set up rescue equipment to rescue victims stranded at height, having first taken into consideration

the likely injuries sustained. This course involves both multi-media presentations and hands-on workshops that require

participants to actively climb and perform rescues with our instructors' guidance. Participants should dress accordingly.

Prerequisite Training: Competent Person OR Fall Protection Rescue (Basic Rescue)


Competent Tower Climber

This training course is designed for all personnel who work on or supervise individuals who work on towers. The training

provides individuals with the required skills to safely recognize evaluate and control hazards related to tower work. It also

teaches participants climbing techniques, proper selection of fall protection equipment and how to properly set up rescue

equipment and rescue a victim, considering the likely injuries sustained. This course involves both multi-media presentations

and hands-on workshops.


Also available in Spanish

See pages 1-11

for complete listing of U.S.

dates and locations.

See pages 12-19

for complete listing of Canada

dates and locations.

http://www.honeywellsafety.com/usa/training

http://www.honeywellsafety.com/ca/training

mailto:[email protected]




855.565.6722 780.577.5485


2

COMPETENT PERSON TRAINING

Competent Person

This intermediate level course is designed for facility and site supervisors who must also serve as the "competent person"

required by OSHA 1926.32(f), 1926.500 and 1910 standards. Participants are provided detailed classroom theory with hands-

on tasks that require evaluation for fall hazards. This course also supplies the participant with the knowledge and skills to

perform the annual inspection and record keeping.

Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $850 per participant*


NOTE: This 16-hr Fall Protection Competent Person course in conjunction with the 8-hr Fall Protection Equipment Inspection course complies with the ANSI/ASSE Z359.2 code. (EM 385-1-1, updated March 2015) (24-hours)

Competent Person & Inspection Training for Military (EM 385-1-1)

This course is designed for military facilities and site supervisors who must also serve as the competent person required by

OSHA 1926.32(f), 1926.500, 1910 and EM385-1-1 standards. Participants are assigned tasks which require evaluation for fall

hazards. The tasks are described using real-life site photos. The training provides more detailed coverage of the Fall

Prevention & Protection Supervisor Training course materials and program topics. The course also supplies the participant

with the knowledge and skills to perform the annual inspection and record keeping.

The Fall Protection Equipment Inspection is designed for military workers that perform annual inspection of fall arrest systems

or workers who inspect the equipment prior to issuing to the users , but does not have the level of responsibility the competent

person does. The training provides experience, methodology and in-depth look at all standards (ANSI & CSA) and regulations

(OSHA) covering inspection of personal fall arrest systems.

Course Length: 24 hours (3-day course) Time: 8 a.m. to 5 p.m. Cost: $1,175 per participant

FALL PROTECTION INSPECTION TRAINING

Fall Protection Equipment Inspection

The Fall Protection Equipment Inspection Course provides experience, methodology and in-depth look at all ANSI standards

and OSHA regulations covering inspection of personal fall arrest systems. It is designed for a tool crib worker who needs to

inspect the equipment prior to issuing to the users, but does not have the level of responsibility the competent person does, or

for the newly trained "competent person" who is responsible for the annual inspection of personal fall arrest systems.

Course Length: 8 hours (1-day course) Time: 8 a.m.to 5 p.m. Cost: $525 per participant*


*Order both Competent Person and Fall Protection Inspection Training for a discounted

cost: $1,175.00. Both courses must be attended on consecutive days.







855.565.6722 780.577.5485


3

CONFINED SPACE TRAINING

Confined Space & Confined Space Entry

This entry level course is designed for individuals responsible for confined space entry, planning, supervising, or for

administrating employees that work in confined spaces in both general industry and construction. A detailed review of confined

space regulations, typical atmospheric, physical, and mechanical hazards are taught and explained. Control measures are

provided along with a number of application exercises focusing on confined space equipment, inspection, gas detection and

atmospheric testing, and non-entry and entry rescue are discussed and reviewed. This confined space course meets or

exceeds OSHA 7300, 29 CFR 1910.146 and 29 CFR 1926.1200 – 1213 (permit required confined space regulations

requirements).


Confined Space Rescue

The Confined Space Rescue course will teach rescue techniques for workers who work in areas with limited or restricted entry

and exit. This course is applicable with 29 CFR 1910.146 Subpart J, better known as Permit Required Confined Spaces. A

review of the Confined Space OSHA regulations, rescue regulations and application of various confined space entry/rescue

equipment with hands-on rescue skill training will be included.

Prerequisite Training: Confined Space & Confined Space Entry Training

Course Length: 8 hours (1-day course) Time: 8 a.m.to 5 p.m. Cost: $550 per participant

OSHA TRAINING

OSHA 10-Hour Construction

This 10-hour training course meets OSHA 29 CFR 1926 requirements. Upon successful completion of the course, participants

will receive a course completion card. All participants will take a pre-test followed by class work on required and selected

OSHA topics.

Course Length: 2-day course Time: 8 a.m. to 2 p.m. Cost: $295 per participant

OSHA 10-Hour General Industry

This 10-hour training course meets OSHA requirements for providing general industry workers awareness in recognizing and

practicing around hazards at a general industry site. Upon successful completion of the course, participants will receive a

course completion card. All participants will take a pre-test followed by class work on required and selected OSHA topics.


OSHA 30-Hour Construction

Construction professionals at every level will learn to identify the most common hazards found on construction sites, locate the

correct standard in 29 CFR 1926 and discuss various construction processes, materials and equipment. Participants will

receive the 30-hour construction card upon course completion.


OSHA 30-Hour General Industry

This introductory course was developed by OSHA for general industry personnel to learn about occupational safety and health

and OSHA standards. All participants will receive the 30-hour general industry card upon completion of the course.








855.565.6722 780.577.5485


4

OSHA Residential Fall Hazards

This 8-hour course is designed for residential construction workers, working six feet or more above a lower level and will help

participants understand OSHA's 29 CFR Part 1926, STD 03-11-002 Compliance Guidance for Residential Construction. This

course will instruct participants on the new OSHA 1926.501K regulation for contractors working on residential rooftops and will

basic fall protection and personal fall protection systems that will help lessen or eliminate potential fall hazards during the

numerous stages of residential construction.

Course Length: 8 hours (1-day course) Time: 8 a.m.to 5 p.m. Cost: $595 per participant

OIL AND GAS TRAINING

AWARE IADC/RIGPASS Orientation

This course is designed to educate employers and employees on the recognition, avoidance, and prevention

of hazards specific to the Oil and Gas industry. Using a picture-based curriculum, AWARE, proves to relate

safety hazards in a practical and clear manner for employees. This course is delivered in 13 modules that

must equal 8 hours of total training. This program is accredited by the IADC RigPass Program and meets

SafeLandUSA endorsement criteria. The presenter is an approved RigPass Instructor.

Reference Text: OSHA 29 CFR 1926, 1910, OSHA 5810.

Course Length: 8 Hours (1-day course) Time: 8 a.m. to 5 p.m. Cost: $245.00

TRAIN THE TRAINER

Train the Trainer Programs are designed to supply the participants with the knowledge & tools to

develop their own training. Participants are not allowed to use, copy or replicate Honeywell training programs

Fall Protection Train the Trainer

Fall protection has developed over the years into a complex field of safety engineering; the subject matter of this four-day

comprehensive course is complex and dynamic and gives the participants knowledge in very specific areas. We suggest that

those attending have had other courses or a basic knowledge of fall protection principles and terminology. Training

techniques/adult learning are a key focus of this training course.

Prerequisite Training: Competent Person

Course Length: 32 hours (4-day course) Time: 8 a.m.to 5 p.m. Cost: $2,100 per participant

Wind Energy Train the Trainer

The rapid growth and interest in wind energy over the past few years have resulted in a variety of safety issues and concerns

with little regulatory influence or guidance. The training content in this 4-day comprehensive course is complex and dynamic,

while providing participants with an in-depth insight and understanding of the specific safety challenges facing this industry.

Adult training techniques are key components of this training course. All participants are asked to conduct a mini-training

course as part of the curriculum.

Course Length: 32 hours (4-day course) Time: 8 a.m.to 5 p.m. Cost: $2,100 per participant

Confined Space Train the Trainer

This course is designed to teach participants how to teach and develop their own confined space training program for their

place of employment. It teaches skills and offers an in-depth review of regulations from 29 CFR 1910.146 Subpart J – Permit

Required Confined Spaces.







855.565.6722 780.577.5485


5

Prerequisite Training: 2-day Confined Space & Confined Space Entry AND 1-Day Confined Space Rescue.

(Total 4-day price: $2,075)

Course Length: 8 hours Time: 8 a.m.to 5 p.m. Cost: $800 per participant

WIND ENERGY TRAINING

Wind Energy 8-Hour Basic Height Safety

The Wind Energy Basic Height Safety Training Course is basic work-at-height training for individuals who are not directly

employed as wind energy engineers or technicians, but who may have an occasional need to climb a wind turbine under

supervised conditions. This is an 8-hour classroom course.

Course Length: 8 hours Time: 8 a.m.to 5 p.m. Cost: $675 per participant

Wind Energy 16-Hour Competent Climber

The rapid growth and interest in wind energy over the past few years have resulted in a variety of safety issues and The Wind

Energy Competent Climber Training Course fulfills the basic work-at-height training requirements for field technicians and

engineers employed within the wind energy sector. The first day is all classroom; day two is hands-on application training.

Wear climbing shoes and jeans.


ON-SITE TRAINING AT YOUR FACILITY OR WORK-SITE

On-Site/Contract

Honeywell is the leading provider of on-site training options, conveniently held at your facility or work-site. Schedule one of our

Training experts to work with your employees in their own environment.

Basic Requirements (Fall Protection Courses):

- Meeting room to accommodate expected number of participants

- Flip chart, markers, easel / White wall or projection screen

- Dedicated table for instructor for equipment (front of Class)

- Electrical outlets for equipment

- Orientation, Awareness and Competent Person courses require anchor point that can support 2X the weight of the

heaviest person in the class

Additional Requirements for Specialty Courses:

- Competent tower climber – tower, scaffolding, or multi-level surface to perform the hands on portion of the class

- Wind Energy Competent climber – wind nacelle to perform hands on exercises

- Confined Space Rescue –a clean and cleared vessel in which to perform horizontal and vertical rescue

- High Access Rescue – tower, scaffolding, or multi-level surface to perform the hands-on portion of the class

All open enrollment classes can be quoted for on-site training. In addition to the advertised classes, we also offer:

- Fall Prevention & Protection Awareness

- Haz Comm, HazMat, Hazwoper

- Aerial Platform

Request a Quote for On-Site, Contract Training:

millerfallprotection.com/training/on-site-

training/on-site-contract-training





http://www.millerfallprotection.com/training/on-site-training/on-site-contract-training

http://www.millerfallprotection.com/training/on-site-training/on-site-contract-training



855.565.6722 780.577.5485


6

SELF-CONTAINED BREATHING APPARATUS (SCBA)

AND SUPPLIED-AIR RESPIRATOR (SAR) CERTIFIED

TECHNICIAN TRAINING COURSES

Panther™/Cougar™ SCBA and Panther Hip-Pac®/SAR Systems

This training course is designed to instruct personnel who will be responsible for repair, maintenance, documentation, and

troubleshooting of the Panther/Cougar SCBA and/or Panther Hip-Pac/SAR systems. Participants will expand their knowledge

regarding government and industry standards and regulations affecting maintenance and use of these systems. Participants

will be involved in practical, hands-on, rebuild and testing of these pneumatic systems.

NOTE: Panther Hip-Pac®/SAR certification is an optional class held on day two of the Panther/Cougar SCBA course.

Course Length: 16 Hours (2-day course) Time: 8 a.m. - 5 p.m. (in CA: 7:25 a.m. - 5 p.m.) Cost: $350.00

SCBA/SAR Re-Certification

This course is designed to allow personnel who hold current Panther™, Cougar™, and Warrior SCBA or Panther Hip-

Pac®/SAR system Technician certification an efficient, skill-based course to validate and renew their certification. Participants

will be required to provide PosiChek3 flow test results as evidence of current work on the pneumatic systems (PosiCheck3 is a

calibrated piece of test equipment utilized to verify that the pneumatic systems are working appropriately to meet government

standards).

Prerequisites: Evidence of current Panther™, Cougar™ or Warrior SCBA and/or Panther Hip-Pac®/SAR System certification.

In addition, PosiChek3 flow test results (5 test results per system) must be performed within 90 days of the

re-certification course.

Course Length: 8 Hours (1-day course) Time: 8 a.m. to 5 p.m. (in CA: 7:25 a.m. - 5 p.m.) Cost: $195.00

TitanTM Series SCBA

This training course is designed to instruct personnel who will be responsible for repair, maintenance, documentation, and

troubleshooting of the Titan™ SCBA and/or Panther Hip-Pac®/SAR systems. Participants will expand their knowledge

regarding government and industry standards and regulations affecting the maintenance and use of these systems.

Participants will be involved in practical, hands-on rebuild and testing of these pneumatic systems.

NOTE: Panther Hip-Pac/SAR certification is an optional class held on day two of the Titan SCBA course.

Course Length: 16 Hours (2-day course) Time: 8 a.m. – 5 p.m. (in CA: 7:25 a.m. – 5 p.m.) Cost: $395.00

WarriorTM to TitanTM SCBA Technician Re-Certification

This course is designed to allow personnel who hold current Warrior SCBA Technician certification an efficient, skill-based

course to update and transfer their current Warrior certification to the Titan SCBA. Participants will be required to provide

PosiChek flow test results as evidence of current work on Warrior SCBA systems.

NOTE: PantherTM, CougarTM SCBA and Panther Hip-Pac®/SAR re-certification may also be accomplished during the

WarriorTM SCBA to TitanTM SCBA Re-certification and Update Course. The following prerequisites apply.

Prerequisites: Evidence of current Warrior SCBA certification and 5 PosiChek flow test results personally performed by the

participant and dated within 90 days of this re-certification course.

Course Length: 8 Hours (1-day course) Time: 8 a.m. – 5 p.m. (in CA: 7:25 a.m. – 5 p.m.) Cost: No Charge







855.565.6722 780.577.5485


7

Fall Prevention & Protection Courses — US

Course Title Start End Location Country Price

Competent Person & Inspection

Training for Military (EM 385-1-1) 2/9/16 2/11/16 Pico Rivera, CA US $1,175.00







Competent Person & Fall Protection Equipment Inspection

Competent Person Price (per person)

Fall Protection Equipment Inspection Price

(per person) Country Location

Start End Start End

1/12/16 1/13/16 $850 1/14/16 1/14/16 $525 US Lincolnshire, IL

1/12/16 1/13/16 $850 1/14/16 1/14/16 $525 US Houston, TX

1/12/16 1/13/16 $850 1/14/16 1/14/16 $525 US Trenton, NJ

2/2/16 2/3/16 $850 2/4/16 2/4/16 $525 US Pico Rivera, CA

2/2/16 2/3/16 $850 2/4/16 2/4/16 $525 US Phoenix, AZ

2/9/16 2/10/16 $850 2/11/16 2/11/16 $525 US Houston, TX

2/16/16 2/17/16 $850 2/18/16 2/18/16 $525 US Franklin, PA

2/23/16 2/24/16 $850 2/25/16 2/25/16 $525 US Houston, TX

(Spanish)

3/8/16 3/9/16 $850 3/10/16 3/10/16 $525 US Milwaukee, WI

3/15/16 3/16/16 $850 3/17/16 3/17/16 $525 US Atlanta GA

3/15/16 3/16/16 $850 3/17/16 3/17/16 $525 US Houston, TX

3/22/16 3/23/16 $850 3/24/16 4/7/16 $525 US Trenton, NJ

3/22/16 3/23/16 $850 3/24/16 3/24/16 $525 US Charleston, SC

3/29/16 3/30/16 $850 3/31/16 3/31/16 $525 US Franklin, PA

4/5/16 4/6/16 $850 4/7/16 4/7/16 $525 US Kansas (TBD)

4/5/16 4/6/16 $850 4/7/16 4/7/16 $525 US Houston, TX

(Spanish)

4/12/16 4/13/16 $850 4/14/16 4/14/16 $525 US Houston, TX

4/12/16 4/13/16 $850 4/14/16 4/14/16 $525 US Indiana (TBD)

4/19/16 4/20/16 $850 4/21/16 4/21/16 $525 US San Francisco,

CA

4/26/16 4/27/16 $850 4/28/16 4/28/16 $525 US Chicago, IL

5/3/16 5/4/16 $850 5/5/16 5/5/16 $525 US Nashville, TN







855.565.6722 780.577.5485


8

Competent Person Price (per person)

Fall Protection Equipment Inspection Price

(per person) Country Location

Start End Start End

5/10/16 5/11/16 $850 5/12/16 5/12/16 $525 US Trenton, NJ

5/10/16 5/11/16 $850 5/12/16 5/12/16 $525 US Houston, TX

5/31/16 6/1/16 $850 6/2/16 6/2/16 $525 US Franklin, PA

6/7/16 6/8/16 $850 6/9/16 6/9/16 $525 US Charlotte, NC

6/7/16 6/8/16 $850 6/9/16 6/9/16 $525 US Detroit, MI

6/7/16 6/8/16 $850 6/9/16 6/9/16 $525 US Houston, TX

(Spanish)

6/14/16 6/15/16 $850 6/9/16 6/9/16 $525 US Houston, TX

6/21/16 6/22/16 $850 6/16/16 6/16/16 $525 US Seattle, WA

6/28/16 6/29/16 $850 6/23/16 6/23/16 $525 US Memphis, TN

7/12/16 7/13/16 $850 6/30/16 6/30/16 $525 US Houston, TX

7/19/16 7/20/16 $850 7/21/16 7/21/16 $525 US Trenton, NJ

7/19/16 7/20/16 $850 7/14/16 7/14/16 $525 US Las Vegas, NV

8/2/16 8/3/16 $850 7/21/16 7/21/16 $525 US Franklin, PA

8/9/16 8/10/16 $850 8/11/16 8/11/16 $525 US Houston, TX

8/9/16 8/10/16 $850 8/11/16 8/11/16 $525 US Tampa, FL

8/9/16 8/10/16 $850 8/11/16 8/11/16 $525 US Pico Rivera, CA

9/20/16 9/21/16 $850 9/22/16 8/4/16 $525 US Trenton, NJ

9/20/16 9/21/16 $850 8/11/16 8/11/16 $525 US Houston, TX

9/20/16 9/21/16 $850 9/22/16 9/22/16 $525 US Las Vegas, NV

9/20/16 9/21/16 $850 9/22/16 9/22/16 $525 US Chicago, IL

9/27/16 9/28/2016 $850 9/22/16 9/22/16 $525 US San Jose, CA

10/4/16 10/5/16 $850 9/29/16 9/29/16 $525 US Paducah, KY

10/11/16 10/12/16 $850 10/13/16 10/13/16 $525 US Houston, TX

10/11/16 10/12/16 $850 10/13/16 10/13/16 $525 US Franklin, PA

10/25/16 10/26/16 $850 10/13/16 10/13/16 $525 US Pico Rivera, CA

11/8/16 11/9/16 $850 10/27/16 10/27/16 $525 US Chicago, IL

11/8/16 11/9/16 $850 11/10/16 11/10/16 $525 US Dallas, TX

11/8/16 11/9/16 $850 11/10/16 11/10/16 $525 US Houston, TX

11/15/16 11/16/16 $850 11/17/16 8/4/16 $525 US Trenton, NJ

11/29/16 11/30/16 $850 12/1/16 12/1/16 $525 US Orlando, FL

11/29/16 11/30/16 $850 12/1/16 12/1/16 $525 US Franklin, PA

Fall Prevention & Protection Train the Trainer – US Prerequisite Training: Competent Person


(per person)

Fall Protection Train the Trainer 3/8/16 3/11/16 Franklin, PA US $2,100








855.565.6722 780.577.5485


9

Fall Protection Train the Trainer 11/1/16 11/4/16 Houston, Tx US $2,100


Fall Protection Train the Trainer 11/29/16 11/20/15 Houston, Tx US $2,100

At Height Safety Courses – US


(per person)

Fall Protection Basic Rescue 1/19/16 1/20/16 Franklin, PA US $975.00

Fall Protection Basic Rescue 1/26/16 1/27/16 Houston, TX US $975.00

Fall Protection Advanced Rescue 2/2/16 2/3/16 Franklin, PA US $1,075.00

Fall Protection Basic Rescue 3/14/16 3/15/16 Trenton, NJ US $975.00

Fall Protection Advanced Rescue 5/4/16 5/5/16 Trenton, NJ US $1,075.00

Competent Tower Climber 5/10/16 5/11/16 Franklin, PA US $895.00

Competent Tower Climber 5/24/16 5/25/16 Houston, TX US $895.00








Confined Space Courses — US

Confined Space Entry Price

Confined Space Rescue Price

Train the Trainer Price Country Location

Start End Start End Start End

1/5/16 1/6/16 $925 1/7/16 1/7/16 $550 1/8/16 1/8/16 $800 US Houston, TX

3/1/16 3/2/16 $925 3/3/16 3/3/16 $550 3/4/16 3/4/16 $800 US Houston, TX

3/29/16 3/30/16 $925 3/31/16 3/31/16 $550 4/1/16 4/1/16 $800 US Houston, TX

5/3/16 5/4/16 $925 5/5/16 5/5/16 $550 5/6/16 5/6/16 $800 US Houston, TX

5/3/16 5/4/16 $925 5/5/16 5/5/16 $550 5/6/16 5/6/16 $800 US Franklin, PA

6/7/16 6/8/16 $925 6/9/16 6/9/16 $550 6/10/16 6/10/16 $800 US Houston, TX

8/2/16 8/3/16 $925 8/4/16 8/4/16 $550 8/5/16 8/5/16 $800 US Houston, TX

8/9/16 8/10/16 $925 8/11/16 8/11/16 $550 8/12/2016 8/12/2016 $800 US Franklin, PA







855.565.6722 780.577.5485


10

Oil & Gas Courses — US


(per person)

Oil & Gas Aware IADC RigPass 3/8/16 3/8/16 Houston, TX US $175



OSHA Courses — US


(per person)

OSHA Residential FP (Fall Protection) 1/11/16 1/11/16 Houston, TX US $595.00

OSHA 10 Hour General Industry 3/1/16 3/2/16 Franklin, PA US $295.00



OSHA 30 Hour Construction 5/17/16 5/20/16 Franklin, PA US $695.00

OSHA 30 Hour General Industry 6/21/16 6/24/16 Franklin, PA US $695.00




OSHA 10 Hour Construction 11/1/16 11/2/16 Franklin, PA US $295.00


Wind Energy Courses — US


(per person)

Wind Energy Competent Climber 2/9/16 2/10/16 Franklin, PA US $1,025.00

Wind Energy Competent Climber 2/23/16 2/24/16 Houston, TX US $1,025.00

Wind Energy 8 Hour Basic Height Safety 3/3/16 3/3/16 Franklin, PA US $675.00

Wind Energy T3 3/29/16 4/1/16 Houston, TX US $2,100.00

9/13/16 9/14/16 $925 9/15/16 9/15/16 $550 9/16/16 9/16/16 $800 US Houston, TX

10/4/16 10/5/16 $925 10/616 10/6/16 $550 10/7/16 10/7/16 $800 US Houston, TX

11/1/16 11/2/16 $925 11/3/16 11/3/16 $550 11/4/16 11/4/16 $800 US Houston, TX

12/6/16 12/7/16 $925 12/8/16 12/8/16 $550 12/9/16 12/9/16 $800 US Franklin, PA

12/13/16 12/14/16 $925 12/15/16 12/15/16 $550 12/16/16 12/16/16 $800 US Houston, TX







855.565.6722 780.577.5485


11


Wind Energy 8 Hour Basic Height Safety 4/19/16 4/19/16 Houston, TX US $695.00


Wind Energy 8 Hour Basic Height Safety 6/1/16 6/1/16 Franklin, PA US $695.00

Wind Energy 8 Hour Basic Height Safety 6/13/16 6/13/16 Houston, TX US $695.00





Self-Contained Breathing Apparatus (SCBA)

and Supplied-Air Respirator (SAR) — US

SCBA Panther Price

SCBA Recertification Price

Titan Price

Country Location


2/1/16 2/2/16 $350 2/2/16 2/2/16 $195 2/3/16 2/4/16 $395 US Santa Ana, CA

3/8/16 3/9/16 $350 3/9/16 3/9/16 $195 3/10/16 3/11/16 $395 US Houston, TX

4/4/16 4/5/16 $350 4/5/16 4/5/16 $195 4/6/16 4/7/16 $395 US Santa Ana, CA

5/10/16 5/11/16 $350 5/11/16 5/11/16 $195 5/12/16 5/13/16 $395 US Houston, TX

6/6/16 6/7/16 $350 6/7/16 6/7/16 $195 6/8/16 6/9/16 $395 US Santa Ana, CA

8/8/16 8/9/16 $350 8/9/16 8/9/16 $195 8/10/16 8/11/16 $395 US Santa Ana, CA

9/12/16 9/13/16 $350 9/13/16 9/13/16 $195 9/14/16 9/15/16 $395 US Houston, TX

10/3/16 10/4/16 $350 10/4/16 10/4/16 $195 10/5/16 10/6/16 $395 US Santa Ana, CA

11/7/16 11/8/16 $350 11/8/16 11/8/16 $195 11/9/16 11/10/16 $395 US Houston, TX

12/5/16 12/6/16 $350 12/6/16 12/6/16 $195 12/7/16 12/8/16 $395 US Santa Ana, CA







855.565.6722 780.577.5485


12

FALL PROTECTION TRAINING

End-User Fall Protection

This 8-hr course provides the participants with a general understanding of the fundamentals of fall protection; regulations that

apply to fall protection; methods of eliminating fall hazards; equipment specifications, care, use, limitations and inspection; and

fall protection planning requirement and importance. Through a combination of lectures and practical exercises, students are

exposed to best practice instructions on the use, limitations, care and maintenance of fall protection. This course includes

regulatory or provincial standards.

Course Length: 8 hours Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

Qualified Person

This two-day intermediate level course is designed for a variety of industries and can be customized to suit the needs of the

work environment. This course contains a combination of lectures, practical activities and knowledge verifications. Program

content includes but is not limited to covering competency, due diligence, applicable Canadian and Provincial legislation and

standards, CSA, with an overview of OSHA and ANSI. The course also supplies the participant with the knowledge and skills

to perform equipment inspections.

Course Length: 16 hours Time: 8 a.m. to 5 p.m. Cost: $850 per participant*

Qualified Inspector of Fall Protection Equipment

This one-day course is designed to provide the participants with the inspection criteria as per CSA, ANSI and the applicable

regulatory body. Tools that will aid the inspector in the successful development, implementation and maintenance of a

documented and scheduled fall protection inspection program in the workplace will also be provided. This course is delivered

through a combination of instructor led presentation, hands on practical activities and theory or knowledge verifications.

Prerequisite: Honeywell Fall Protection Qualified Person

Course Length: 8 hours Time: 8 a.m. to 5 p.m. Cost: $550 per participant*

* Order and attend both Qualified Person and Qualified Inspector of Fall Protection

Equipment on consecutive days to be eligible for a discount.

Fall Protection Train the Trainer

This four-day course is designed to provide participants with tools as an instructor to design and deliver fall protection course

materials. Instructing is a unique skill set and requires confidence, organization, subject knowledge and content. The Trainer

provides insight on how adults learn, process, and use information. The course combines activities, participant presentations

and knowledge verifications. Fall Protection Train the Trainer provides a complete instructor package that includes Qualified

Person and Qualified Inspector of Fall Protection Equipment.

Course Length: 4 days Time: 8 a.m. to 5 p.m. Cost: $2,100 per participant

Working at Heights Fall Protection Ministry of Labour Approved Program for Ontario

This one-day course is designed for workers who may perform construction related activities and at times be required to work

at heights where fall protection is required. The program provides workers and supervisors with the necessary knowledge

required to safely work at heights and prevent fall related accidents. This program is compliant with Ontario regulation 213/91

section 26 and meets all requirements of both the New Working at Heights Program Standard and Training Provider Standard.

Course Length: 1 day Time: 8 a.m. to 5 p.m. Cost: $245 per participant







855.565.6722 780.577.5485


13

OIL SANDS SAFETY ASSOCIATION (OSSA) TRAINING

Oil Sands Safety Association (OSSA) approved training programs

meet the required safety standards to help create an “incident-free” workforce.

OSSA Fall Protection

This 8-hr course provides the participants with a general understanding of the fundamentals of fall protection, regulations that

apply to fall protection, methods of eliminating fall hazards, equipment specifications, care, use, limitations, inspection, fall

protection planning requirements and importance. The course consists of a combination of lectures, practical exercises, group

activities and knowledge verifications.

Course Length: 8 hours / 4-days (Train the Trainer) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

OSSA Elevated Work Platform

This 8-hr course provides participants with the knowledge and general understanding of the legislative standards, preoperative

checks, machine selection and safe operation of Elevated Work Platform (EWP) equipment. Through a combination of lectures

and practical exercises participants are exposed to best practice instructions on the use, limitations, care and maintenance of

EWPs. This course includes regulatory and provincial standards.

Prerequisite: OSSA Fall Protection

Course Length: 8 hours / 2-days (Train the Trainer) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

OSSA Confined Space Entry and Monitor

This 6-8 hr. course is designed to ensure that all participants demonstrate the basic knowledge and proficiency in the

classification and identification of hazards associated with working in confined spaces and the identification of restricted

spaces. Workers required to enter a confined or restricted space must be trained in the recognition of the risks and hazards

associated with confined or restricted space entry and monitoring, and understand the methods of controlling these associated

risks and hazards.

Course Length: 6-8 hours / 2-days (Train the Trainer) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

OSSA Fire Watch

This 4-6 hr. course is designed to ensure that all participants demonstrate basic knowledge and proficiency in the classification

and identification of types of fires and extinguishers. Participants must also demonstrate knowledge of the care, use and

limitations of a fire extinguisher.

Course Length: 4-6 hours / 2-days (Train the Trainer) Time: 8 a.m. to 3 p.m. Call for cost: 780.577.5485

OSSA Basic Safety Orientation (BSO)

Upon completion of the OSSA Basic Safety Orientation Program a worker will be able to present their credential to participating

Oil Sands Safety Association Owner Member sites (Canadian Natural, Shell Albian Sands, Suncor Energy Inc., and Syncrude

Canada Ltd.) as proof of completing the orientation.

Course Length: 4 hours Time: 8 a.m. to 12 p.m. Cost: $200 per participant







855.565.6722 780.577.5485


14

OSSA TRAIN THE TRAINER

OSSA Fall Protection Train the Trainer

This course is designed for instructors required to provide fall protection training and is a combination of Qualified Person Fall

Protection, Qualified Inspector of Fall Protection Equipment and Fall Protection Train the Trainer. Instructors will be taught a

general understanding of the fundamentals of fall protection; regulations that apply to fall protection; methods of eliminating fall

hazards; equipment specifications, care, use, limitations and inspection; and fall protection planning requirements and

importance. Instructing is a unique skill set and requires confidence, organization, subject knowledge and content

familiarization. This course provides insight on how adults learn, process and use information through instructor lead

presentations, group activities, participant presentations and knowledge verifications. Participants will be provided with tools as

an instructor to deliver course materials through a combination of Train the Trainer, instructor guides, co-teach and

observation sessions.

Course Length: 4 days (32 hrs.) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

OSSA Elevated Work Platform Train the Trainer

This course is designed for instructors required to provide elevated work platform training and includes subject matters

covered in OSSA Fall Protection. Instructors will be taught the theory behind the legislative standards, preoperative checks,

machine selection and safe operation of Elevated Work Platform (EWP) equipment. Through a combination of lectures and

practical exercises, instructors are exposed to best practices on the use, limitations, care and maintenance of EWPs. This

course includes regulatory and provincial standards. Instructing is a unique skill set and requires confidence, organization,

subject knowledge and content familiarization. This course provides insight on how adults learn, process and use information

through instructor lead presentations, group activities, participant presentations and knowledge verifications. Participants will

be provided with tools as an instructor to deliver course materials through a combination of Train the Trainer, instructor guides,

co-teach and observation sessions.

Course Length: 2 days (16 hrs.) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

OSSA Confined Space Entry and Monitor Train the Trainer

This course is designed for instructors who are required to provide confined space entry and monitor training. Instructors will

be trained to recognize the risks and hazards associated with confined spaces and the methods of controlling them.

Additionally, classification of confined space, legislation, standards and code of practice will also be learned. Instructing is a

unique skill set and requires confidence, organization, subject knowledge and content familiarization. This course provides

insight on how adults learn, process and use information through instructor lead presentations, group activities, participant

presentations and knowledge verifications. Participants will be provided with tools as an instructor to deliver course materials

through a combination of Train the Trainer, instructor guides, co-teach and observation sessions.

Course Length: 2-days (16 hrs.) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485

OSSA Fire Watch Train the Trainer

This course is designed for instructors required to provide fire watch training and includes knowledge and proficiency in the

classification and identification of types of fires and extinguishers. Instructors will be required to demonstrate their knowledge

of the care, use and limitations of a fire extinguisher. Through a combination of lectures and practical exercises, instructors are

exposed to best practices, regulations and standards, including Alberta Occupational Health and Safety, Alberta Fire Code

and National Fire Protection Agency. Instructing is a unique skill set and requires confidence, organization, subject knowledge

and content familiarization. This course provides insight on how adults learn, process and use information through instructor

lead presentations, group activities, participant presentations and knowledge verifications. Participants will be provided with

tools as an instructor to deliver course materials through a combination of Train the Trainer, instructor guides, co-teach and

observation sessions.

Course Length: 2-days (16 hrs.) Time: 8 a.m. to 5 p.m. Call for cost: 780.577.5485







855.565.6722 780.577.5485


15

ON-SITE TRAINING AT YOUR FACILITY OR WORKPLACE

On-Site Training

Honeywell is the leading provider of on-site training options, conveniently held at your facility or work-site. Schedule one of our

instructors to work with your employees in their own environment.

Basic Requirements

Training or meeting room to adequately accommodate the expected number of participants, with ample room for

practical activities if applicable.

Flip chart or white board, markers (Honeywell can supply if not available)

Projector (Honeywell can supply if not available)

Projector screen or white wall (Honeywell can supply if not available)

Dedicated table to instructor equipment and materials

Electrical outlets for equipment

Elevated Work Platform equipment in good working order (if applicable)

Any additional requirements will be addressed at the time of booking.

To learn more about scheduling a trainer to work with your employees in their own

environment please call 780.577.5485 or email [email protected]

Fall Protection — Canada Qualified Person, Qualified Inspector, and Train the Trainer Courses

Qualified Person Price(2 days)

Qualified Inspector Price (3 days)

Train the Trainer Price (4 days)

Country Location


1/12/16 1/13/16 $850 1/14/16 1/14/16 $1100 1/15/16 1/15/16 $2100 Canada Edmonton,

AB

1/19/16 1/20/16 $850 1/21/16 1/21/16 $1100 1/22/16 1/22/16 $2100 Canada Toronto,

ON

2/9/16 2/10/16 $850 2/11/16 2/11/16 $1100 2/12/16 2/12/16 $2100 Canada Calgary, AB

2/16/16 2/17/16 $850 2/18/16 2/18/16 $1100 2/19/16 2/19/16 $2100 Canada Vancouver,

BC

2/23/16 2/24/16 $850 2/25/16 2/25/16 $1100 2/26/16 2/26/16 $2100 Canada Toronto,

ON

3/8/16 3/9/16 $850 3/10/16 3/10/16 $1100 3/11/16 3/11/16 $2100 Canada

Montreal,

QC

(French)

3/15/16 3/16/16 $850 3/17/16 3/17/16 $1100 3/18/16 3/18/16 $2100 Canada Edmonton,

AB

3/21/16 3/22/16 $850 3/23/16 3/23/16 $1100 3/24/16 3/24/16 $2100 Canada Toronto,

ON

4/12/16 4/13/16 $850 4/14/16 4/14/16 $1100 4/15/16 4/15/16 $2100 Canada Edmonton,

AB

4/19/16 4/20/16 $850 4/21/16 4/21/16 $1100 4/22/16 4/22/16 $2100 Canada Toronto,

ON



BC








855.565.6722 780.577.5485


16

Working at Heights (MOL approved – Ontario only) — Canada


(per person)

Working at Heights (MOL approved) 1/6/16 1/6/16 Woodbridge, ON Canada $245

Working at Heights (MOL approved) 1/7/16 1/7/16 Mississauga, ON Canada $245


Working at Heights (MOL approved) 1/13/16 1/13/16 Bolton, ON Canada $245

5/24/16 5/25/16 $850 5/26/16 5/26/16 $1100 5/27/16 5/27/16 $2100 Canada Toronto,

ON

6/7/16 6/8/16 $850 6/9/16 6/9/16 $1100 6/10/16 6/10/16 $2100 Canada

Montreal,

QC

(French)

6/14/16 6/15/16 $850 6/16/16 6/16/16 $1100 6/17/16 6/17/16 $2100 Canada Edmonton,

AB

6/21/16 6/22/16 $850 6/23/16 6/23/16 $1100 6/24/16 6/24/16 $2100 Canada Toronto,

ON

7/12/16 7/13/16 $850 7/14/16 7/14/16 $1100 7/15/16 7/15/16 $2100 Canada Edmonton,

AB

7/19/16 7/20/16 $850 7/21/16 7/21/16 $1100 7/22/16 7/22/16 $2100 Canada Toronto,

ON



BC

8/23/16 8/24/16 $850 8/25/16 8/25/16 $1100 8/26/16 8/26/16 $2100 Canada Toronto,

ON

9/6/16 9/7/16 $850 9/8/16 9/8/16 $1100 9/9/16 9/9/16 $2100 Canada

Montreal,

QC

(French)

9/13/16 9/14/16 $850 9/15/16 9/15/16 $1100 9/16/16 9/16/16 $2100 Canada Edmonton,

AB

9/20/16 9/21/16 $850 9/22/16 9/22/16 $1100 9/23/16 9/23/16 $2100 Canada Toronto,

ON

10/4/16 10/5/16 $850 10/6/16 10/6/16 $1100 10/7/16 10/7/16 $2100 Canada Edmonton,

AB

10/18/16 10/19/16 $850 10/20/16 10/20/16 $1100 10/21/16 10/21/16 $2100 Canada Toronto,

ON



BC

11/22/16 11/23/16 $850 11/24/16 11/24/16 $1100 11/25/16 11/25/16 $2100 Canada Toronto,

ON

12/6/16 12/7/16 $850 12/8/16 12/8/16 $1100 12/9/16 12/9/16 $2100 Canada

Montreal,

QC

(French)

12/13/16 12/14/16 $850 12/15/16 12/15/16 $1100 12/16/16 12/16/16 $2100 Canada Edmonton,

AB

12/19/16 12/20/16 $850 12/21/16 12/21/16 $1100 12/22/16 12/22/16 $2100 Canada Toronto,

ON







855.565.6722 780.577.5485


17


(per person)



























Working at Heights (MOL approved) 7/716 7/716 Mississauga, ON Canada $245











855.565.6722 780.577.5485


18


(per person)
























Oil Sands Safety Association (OSSA) Courses – Canada

Train the Trainer


(per person)

OSSA Fall Protection 1/12/16 1/15/16 Edmonton, AB Canada $2,100

OSSA Fire Watch 1/18/16 1/18/16 Edmonton, AB Canada $1,000







855.565.6722 780.577.5485


19


(per person)

OSSA Confined Space Entry and Monitor 1/19/16 1/19/16 Edmonton, AB Canada $1,000

OSSA Elevated Work Platform 1/20/16 1/21/16 Edmonton, AB Canada $1,500

































honeywell fall prevention and protection training · honeywell fall prevention and protection...

Documents