honeywell test & measurement - accelerometers

General Purpose AccelerometerModel JTF

DESCRIPTIONThe JTF accelerometers offer three mounting choices to meet

specific application requirements. The sensing technique for

these accelerometers is based on piezoresistive technology.

Frequency response extends down to dc. Hermetic construction

of the JTF Series provides dependable performance in harsh

industrial environments. The case material is non-magnetic from

either anodized aluminum or stainless steel which provides low

magnetic field susceptibility. Our standard in-line amplifiers and

Instrumentation may be used with the JTF Series accelerom-

eters. The screw mount model can be supplied with an optional

triaxial mounting block, allowing for more than one accelerom-

eter to be used.

FEATURES• 0Hzoperation

• Easycalibration

• Lowimpedance

• Screw,bolt,orstudmountingoptions

• mV/Goutput

• Canrunat0Hz

• Lowmagneticfieldduetocasematerial

Model JTF Bolt Mount

Model JTF Screw Mount

Model JTF Stud Mount

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

2Honeywell•SensingandControl

Model JTF

PERFORMANCE SPECIFICATIONS

Characteristic Measure

Dynamic range ±5Gto200G(peakG)

Sensitivity See range code table

Transverse sensitivity Lessthan5%

Frequency range See range code table

Frequency response1 ±5%

Non-linearity and hysteresis ±1%fullscale

Mounted base resonance See range code table

Dampingratio(nominal) 0.7C@21°C[70°F]

ENVIRONMENTAL SPECIFICATIONS


Temperature, operating -40°Cto121°C[-40°Fto250°F]

Temperature, compensated 21°Cto93°C[70°Fto200°F]1

Temperature effect, zero (max.)

0.02%fullscale/°F

Temperature effect, sensitivity(max.)

±10%

ELECTRICAL SPECIFICATIONS


Excitation,calibration 5Vdc

Excitation,acceptable Upto10Vdc

Electricaltermination,AG111

Tefloncable1,5m[5ft]

Electricaltermination,AG112/AG113

10-32UNF4-pinconnector

Mating connector 10-32UNFsocketplug2

MECHANICAL SPECIFICATIONS


Accelerationlimits(anydirection)

x20

Weight,AG111 0,03kg[1oz]

Weight,AG112&AG113 0,06kg[2.1oz]

Casematerial,AG111 Anodized Aluminum

Casematerial,AG112andAG113

Stainless steel

OPTION CODES

AG111 Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

Range 5G,10G,20G,50G,100G,200G

WIRING CODES

Screw mountRed (+)Excitation

Black (-)Excitation

Green (-)Output

White (+)Output

RANGE CODES

Range code Available ranges (peak G)

Sensitivity nominal

Sensitivity range

Usable frequency range

Mounted resonant frequency

GJ ±5G 8mV/G 5mV/Gto12mV/G 0Hzto300Hz 800Hz

GK ±10G 3.8mV/G 2.4mV/Gto5mV/G 0Hzto400Hz 1000Hz

GL ±20G 1.8mV/G 1.2mV/Gto2.4mV/G 0Hzto600Hz 1500Hz

GN ±50G 0.8mV/G 0.5mV/Gto1.2mV/G 0Hzto1000Hz 2000Hz

GP ±100G 0.38mV/G 0.24mV/Gto0.5mV/G

0Hzto1500Hz 3000Hz

GV ±200G 0.18mV/G 0.12mV/Gto0.24mV/G

0Hzto2000Hz 4000Hz


SensingandControl

AutomationandControlSolutions

Honeywell

1985DouglasDriveNorth

GoldenValley,MN55422USA

+1-815-235-6847

www.honeywell.com/sensing

008727-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.

Model JTF General Purpose Accelerometer

MOUNTING DIMENSIONS

Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com

WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.

Failure to comply with these instructions could result in death or serious injury.

WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.


TYPICAL SYSTEM DIAGRAM

NOTES1. Output voltage is proportional to input voltage.2.OnlyavailablewithAG112andAG113.

BOLT OR STUD MOUNT


AccelerometerModel MA11

DESCRIPTIONThe Model MA11 amplified piezoelectric accelerometers are

designed to be used in Industrial test and automation environ-

ments; including laboratory testing, modal studies and

test cells. The seismic element is mechanically isolated from

the mounting base, resulting in a low base strain sensitivity. The

stainless steel materials are non-magnetic resulting in very low

magnetic field susceptibility. These features, together with a

sealed body, assure accurate and reliable data.

The Model MA11 is available in a number of configurations

and options that includes connector or integral stainless steel

armored cable (specify length at time of ordering), or a submers-

ible format. The Model MA11 can be supplied in a number of

different dynamic ranges to suit the expected vibration levels for

the application.

FEATURES• Generalpurpose

• 2Hzto10kHzusablefrequencyrange

• IEPEoutput

• mV/Goutput

• Intrinsicallysafeoption

• Multipleterminationoptions



Model MA11



Dynamic range ±80G

Sensitivity 100mV/G±10%


Temperature sensitivity 0.145/°F

Frequencyrange 2Hzto10kHz±5%3dBlimits

Amplitude linearity Betterthan1%linearity

Mounted base resonance 18kHz

Acceleration range ±80G(dependentonsensitivity)



Temperature, operating -57°Cto138°C[-70°Fto280°F]

Shocklimits 2000G

Vibrationlimits 2000G

Sealing,AG901andAG902 IP67/NEMA4

Sealing,AG905 IP68/NEMA4x



Input Constantcurrent

Currentrange 0.5mAto8mA

Biasvoltage 12Vdc

Cable2,AG902 StainlesssteeloverbraidedPTFE

Cable2,AG905 PU

Standardcablelength2, AG902

4,9m[16ft]

Standardcablelength2, AG905

Specifyattimeoforder

Electricalnoise 0.1mGmax.

Isolation Baseisolated

Mating connector1 MH002



Design Isolated compression in faraday cage

Weight,AG901andAG902 0,11kg[3.85oz]

Weight,AG905 0,15kg[5.3oz]

Material Stainlesssteel

Mountingtorque 6ft-lb

SENSITIVITY CODES

Sensitivity Code Sensitivity

GU 10mV/G

GH 100mV/G

GG 1000mV/G

OPTION CODESMany range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.

Sensitivity 10mV/G;100mV/G;1000mV/G

Electrical termination

2pinMS1

Cablelength(specifyattimeofordering)2

Mounting arrangement

17b.1/4-28UNF17c.Quickfitfemale

MOUNTING DIMENSIONS

WIRING CODES

AG901

PinA (+)Supply

PinB Supplyreturn

AG902 and AG905

White (+)Supply(+)output

Black Supplyreturn

Shield Noconnection


SensingandControl


Honeywell



+1-815-235-6847



Model MA11 Accelerometer

Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecific warranty details. If warranted goods are returned to Honeywellduringtheperiodofcoverage,Honeywellwillrepairor replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.

Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.






NOTES1.OnlyavailablewithAG901.2.OnlyavailablewithAG902andAG903.3.AG902andAG905donotneedmatingconnectors.4. Intrinsicallysafe(2N)onlyavailablewithcableexit.




DESCRIPTIONThe Model MA12 low profile amplified piezoelectric accelerom-

eters are designed to be used in Industrial test and automation

environments; including laboratory testing, modal studies and

test cells where head room is limited and where a low profile

unit is desirable. The constant current low output impedance

output combined with the ability to drive high load capacitance

allows long runs of low cost cable without degradation of data.

The seismic element is mechanically isolated from the mount-

ing base, resulting in a low base strain sensitivity. The stainless

steel materials are non-magnetic resulting in very low magnetic

field susceptibility. These features, together with a sealed body,

assure accurate and reliable data. The Model MA12 can be

supplied in a number of different sensitivites to suit the expected

vibration levels for the application.

FEATURES• General purpose

• 2 Hz to 8 kHz usable frequency range

• IEPE output

• mV/G output

• Connector or cable output

• Low profile mounting configuration


2 Honeywell • Sensing and Control

Model MA12



Dynamic range ±80 G

Sensitivity 100 mV/G ±10 %

Transverse sensitivity Less than 5 %


Frequency range 2 Hz to 8 kHz

Amplitude linearity Better than 1 % linearity

Mounted base resonance 18 kHz



Temperature, operating -57 °C to 138 °C [-70 °F to 280 °F]

Sealing IP67/NEMA 4



Input Constant current

Current range 0.5 mA to 8 mA

Bias voltage 12 Vdc

Cable2 Stainless steel overbraided PTFE

Electrical noise 0.1 mG max.

Isolation Base isolated




Weight 0,17 kg [6 oz]

Material Stainless steel

Mounting torque 6 ft-lb

SENSITIVITY CODES


GU 10 mV/G

GH 100 mV/G

GG 1000 mV/G


Sensitivity 10 mV/G, 100 mV/G, 1000 mV/G

Electricaltermination

2-pin MS1

Cable length2 (specify at time of ordering)

MOUNTING DIMENSIONS

WIRING CODES

AG903

Pin A (+) Supply

Pin B Supply return

AG904

White (+) Supply (+) output

Black Supply return

Shield No connection



Sensing and Control

Automation and Control Solutions

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422 USA

+1-815-235-6847







For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]





NOTES1. Not applicable for AG904.2. Not applicable for AG903.3. AG904 does not need mating connectors.



DESCRIPTIONThe Model MA15 is a low cost amplified piezoelectric acceler-

ometer which is designed to be used in Industrial test and auto-

mation environments; including laboratory testing, modal studies

and test cells. The constant current low output impedance

output combined with the ability to drive high load capacitance


The Model MA15 features a high natural frequency, a wide

frequency range and a flat sensitivity vs. temperature response

over the temperature range. The seismic element is mechani-

cally isolated from the mounting base, resulting in a low base

strain sensitivity. The stainless steel materials are non-magnetic

resulting in very low magnetic field susceptibility. These features,

together with a sealed body, assure accurate and reliable data.

The Model MA15 is available in a number of configurations and

options that include connector or integral stainless steel armored

cable (specify length at time of ordering) and an intrinsically

safe option. The mounting hole can be supplied with different

threads. The Model MA15 can be supplied in a number of differ-

ent sensitivities to suit the expected vibration levels for the

application.

FEATURES• General purpose

• 4 mA to 20 mA two-wire proportional to G output

• 2 Hz to 1 kHz usable range

• Intrisically safe option

• Stainless steel overbraided PTFE cable



Model MA15



Dynamic range ±50 G std.

Range 4 mA to 20 mA for 10 G



Frequency range 2 Hz to 1 kHz ±10 %






Sealing IP67/NEMA 4



Input Voltage

Output 4 mA to 20 mA for 50 G

Supply voltage 12 V to 32 V

Cable, AG907 Stainless steel overbraided PTFE

Standard cable length, AG907

4,9 m [16 ft]



Mating connector, AG906 MH008






MOUNTING DIMENSIONS

AG907White (+) Supply

Black (+) Output

Shield Case ground


Dynamic 1 G, 2 G, 5 G, 10 G, 50 G


3-pin 62 GB connectorCable - cable length (specify at tme of order-ing)17b. 1/4-28 UNF17c. Quickfit female

WIRING CODES

AG906Pin A (+) Supply

Pin B No connection

Pin C (+) Output

RANGE CODES (diff. by dynamic range)

Range Code Range

GE 1 G

GF 2 G

GJ 5 G

GK 10 G

GN 50 G


Sensing and Control


Honeywell



+1-815-235-6847















DESCRIPTIONThe Model MA21 miniature, low profile amplified piezoelectric

accelerometers are designed to be used in Industrial test and

automation environments including laboratory testing, modal

studies, and test cells where head room is limited and where

a low profile unit is desirable. The constant current low output

impedance output combined with the ability to drive high

load capacitance allows long runs of low cost cable without

degradation of data. The Model MA21 features a high natural

frequency, a wide frequency range and a flat sensitivity vs.

temperature response over the temperature range. The seismic

element is mechanically isolated from the mounting base, result-

ing in a low base strain sensitivity. The stainless steel materials

are non-magnetic resulting in very low magnetic field suscep-

tibility. These features, together with a sealed body, assure ac-

curate and reliable data.

FEATURES• Miniaturesize

• Lowprofile

• IEPEoutput

• mV/Goutput

• Isolatedacoutput

• StainlesssteeloverbraidedPTFEcable



Model MA21



Dynamic range ±80G

Sensitivity 100mV/G±10%@80Hz



Frequencyrange 2 Hz to 9 kHz

Amplitude linearity Betterthan1%linearity




Temperature, operating -12°Cto138°C[10°Fto280°F]

Sealing IP67/NEMA4



Input Constantcurrent

Currentrange 0.5mAto8mA

Bias voltage 12Vdc

Cable StainlesssteeloverbraidedPTFE

Standardcablelength 4,9m[16ft]

Electricalnoise 0.1mGmax.




Weight 0,11kg[3.9oz]

Material Stainlesssteel

Mounting torque 6ft-lb

SENSITIVITY CODES


GU 10mV/G

GC 30mV/G

GH 100mV/G

GG 1000mV/G


Sensitivity 10mV/G,30mV/G,100mV/G,1000mV/G


Cablelength(specifyattimeofordering)

MOUNTING DIMENSIONS

WIRING CODES

Wire

Black (+)Supply(+)Output

White Supplyreturn

Shield Connectedtocase


SensingandControl


Honeywell



+1-815-235-6847






Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.









DESCRIPTIONThe Model MA23 subminiature amplified piezoelectric acceler-

ometers are designed to be used in laboratory testing, modal

analysis studies, and structural monitoring. The constant current

low output impedance output combined with the ability to drive

high load capacitance allows long runs of low cost cable without

degradation of data. The Model MA23 features a high natural

frequency, a high sensitivity, a wide frequency range and a flat

sensitivity vs. temperature response over the temperature range.

The model MA23 would normally be mounted to the structure

using beeswax or adhesive. The model MA23 can be supplied

with different cable lengths.

FEATURES• Subminiature size

• Low profile and light weight

• IEPE output

• mV/G output



Model MA23




Sensitivity 1 V/G

Transverse sensitivity 5 % max.








Sealing IP65/NEMA 2





Bias voltage 12 V

Cable PTFE

Standard cable length 4,9 m [16 ft]





Weight 0,009 kg [0.3 oz]

Material HE 30 Aluminum

Mounting Beeswax or adhesive

SENSITIVITY CODES


GH 100 mV/G

GG 1000 mV/G (1v/g)


Sensitivity 100 mV/G, 1000 mV/G (1 v/g)


Cable length (specify at time of ordering)

MOUNTING DIMENSIONS

WIRING CODES

Wire

Center (+) Supply (+) Output

Shield Connected to case


Sensing and Control


Honeywell



+1-815-235-6847














AccelerometerModels MA311 and MA312

DESCRIPTIONThe MA311/312 Series accelerometers are available in a variety

of configurations and can be stud or bolt mounted to meet spe-

cific application requirements. Welded austenitic stainless steel

construction ensures dependable performance in harsh indus-

trial environments. Designed with low impedance strain gages,

the frequency ranges extend down to dc, sensitivity to noise is

minimized, and amplifier electronics are simplified.

FEATURES• ac and dc response

• Amplified voltage output

• 0 Hz to 1800 Hz usable range

• Stud or bolt mounted

• mV/G output



Models MA311 and MA312



Sensitivity 100 mV/G


Temperature sensitivity 0.145/ °F

Frequency range Dependent on dynamic range ±5 % (see below)

±1 G and ±2 G dc to 250 Hz

±5 G dc to 300 Hz

±10 G dc to 500 Hz

±20 G dc to 700 Hz

±50 G dc to 1 kHz



Acceleration limits x20 of dynamic range



Temperature, operating -18 °C to 82 °C [0 °F to 180 °F]

Sealing IP65/NEMA 2



Input Voltage

Supply voltage 12 V to 24 V @7 mA

Output impedance 50 Ohm

Cable Stainless steel overbraided PTFE


Electrical noise 10 mG






SENSITIVITY CODES


GH 100 mV/G


Dynamic range ±1 G, ±2 G, ±5 G, ±10 G, ±20 G, ±50 G



Mountingarrangement

17b. 1/4-28 UNF*17c. Quickfit female*

MOUNTING DIMENSIONS

WIRING CODES

WireRed (+) Supply

Blue (-) Supply

Yellow (+) Output

Green (-) Output

Shield Not connected


Sensing and Control


Honeywell



+1-815-235-6847



Models MA311 and MA312 Accelerometer












DESCRIPTIONThe MA321/322 Series accelerometers are available in a variety

of configurations and can be stud or bolt mounted to meet spe-

cific application requirements. Welded austenitic stainless steel

construction ensures dependable performance in harsh indus-

trial environments. Designed with low impedance strain gages,

the frequency ranges extend down to dc, sensitivity to noise is

minimized, and amplifier electronics are simplified.

FEATURES• ac and dc response

• 4 mA to 20 mA two-wire output proportional to G

• Built-in signal conditioning

• Stud or bolt mounted

• 0 Hz to 1800 Hz usable range






Output 4 mA to 20 mA range, 12 mA @ 0 G with sensitivity scaled to a full range output, i.e. ±5 G = 1.6 mA/G




±1 G & ±2 G dc to 250 Hz

±5 G dc to 300 Hz

±10 G dc to 500 Hz

±20 G dc to 700 Hz

±50 G dc to 1 kHz







Sealing IP65/NEMA 2



Input Voltage

Supply voltage 12 V to 24 V @7 mA

Output impedance 50 Ohm










Dynamic range ±1 G, ±2 G, ±5 G, ±10 G, ±20 G, ±50 G



Mountingarrangement

17b. 1/4-28 UNF*17c. Quickfit female*10-32 UNF female

MOUNTING DIMENSIONS

WIRING CODES

WireRed (+) Supply

Blue (-) Supply

Yellow (+) Output

Green (-) Output



Sensing and Control


Honeywell



+1-815-235-6847















DESCRIPTIONThe MA331/332 Series accelerometers are designed to be used

in Industrial test and automation environments including labora-

tory testing, modal studies and test cells in application requiring

a frequency response down to 0 Hz. The MA331/332 Series

accelerometers come in different styles. This mV ouput ver-

sion is for applications where strain gage signal conditioning is

likely to be used to condition the signal. The Model MA331/332

Series can also be supplied in a number of different frequency

ranges and sensitivites to suit the application. The stainless steel

materials are non-magnetic resulting in very low magnetic field

susceptibility. These features, together with a sealed body, as-

sure accurate and reliable data.

FEATURES• dc response

• mV/V output

• For use with strain gage amps







Output 15 mV to 75 mV full scale




±1 G and ±2 G dc to 250 Hz

±5 G dc to 300 Hz

±10 G dc to 500 Hz

±20 G dc to 700 Hz

±50 G dc to 1 kHz







Sealing IP65/NEMA 2



Input Voltage

Supply voltage 5 V @ 7 mA

Output impedance 3000 ohm








Case material Stainless steel


Dynamic range 1 G, 2 G, 5 G, 10 G, 20 G, 50 G



Mountingarrangement

17b. 1/4-28 UNF17c. Quickfit female10-32 UNF female

WIRING CODES

WireRed (+) Supply

Blue (-) Supply

Yellow (+) Output

Green (-) Output


RANGE CODES

Range Code Range

GE 1 G

GF 2 G

GJ 5 G

GK 10 G

GL 20 G

GN 50 G


008723-2-EN IL50 GLO September 2009Copyright © 2009 Honeywell International Inc. All rights reserved.


Sensing and Control

Honeywell


Golden Valley, MN 55422

www.honeywell.com





MOUNTING DIMENSIONS

4 holes for 6-40 UNF bolts

25,4 mm[1.0 in]

33,02 mm[1.30 in]

1/4-28 UNF

25,4 mm

[1.0 in]

3,09 mm[0.122 in]

Model MA331 (order code AG919) Model MA332 (order code AG920)

WARNINGPERSONAL INJURY

•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.


WARNINGMISUSE OF DOCUMENTATION

•Theinformationpresentedinthisdatasheetisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.


Find out more

Honeywell serves its customers

through a worldwide network of

sales offices, representatives

and distributors. For application

assistance, current specifica-

tions, pricing or name of the

nearest Authorized Distributor,

contact your local sales office.

To learn more about Honeywell’s

test and measurement products,

call +1-614-850-5000, visit

www.honeywell.com/sensotec,

or e-mail inquiries to

[email protected]



DESCRIPTIONThe MA341/342 Series miniature amplified piezoelectric acceler-

ometers are designed to be used in Industrial test and automa-

tion environments; including laboratory testing, modal studies

and test cells where space is limited and small size is desired

or a high natural frequency is required. The constant current low

output impedance output combined with the ability to drive high

load capacitance allows long runs of low cost cable without deg-

radation of data. The seismic element is mechanically isolated

from the mounting base, resulting in a low base strain sensitivity.

The stainless steel materials are non-magnetic resulting in very

low magnetic field susceptibility. These features, together with a

sealed body, assure accurate and reliable data. The MA341/342

series is available in a number of configurations and options that

includes different mounting arrangement patterns and different

stainless steel armored cable lengths, (specify length at time of

ordering).

FEATURES• High frequency


• IEPE output

• mV/G output

• Isolated ac output

















Sealing IP67/NEMA 4





Bias voltage 12 Vdc










SENSITIVITY CODES


GU 10 mV/G

GC 30 mV/G

GH 100 mV/G

GG 1000 mV/G


Sensitivity 10 mV/G, 30 mV/G, 100 mV/G, 1000 mV/G



MOUNTING DIMENSIONS

WIRING CODES

Wire

Black (+) Supply (+) Output

White Supply return


31,00 mm[1.22 in]

15,00 mm[0.59 in]

10-32 UNF female


Sensing and Control


Honeywell



+1-815-235-6847


008731-2-EN IL50 GLO December 2008Copyright © 2008 Honeywell International Inc. All rights reserved.











AccelerometerModel MAQ13

DESCRIPTIONThe Model MAQ13 charge output miniature accelerometer is


ments; including laboratory testing, modal studies and test cells

where high temperatures are likely to be encountered and where

space is limited and small size is desired or a high natural fre-

quency is required. The MAQ13 is a self-generating piezoelec-

tric transducer which has no internal electronics and requires no

external power for operation. These units are usually connected

to a local charge amplifier that is mounted as near as possible

in a lower temperature environment. The Model MAQ13 features

a wide frequency range, and a flat sensitivity vs. temperature

response over the temperature range. The seismic element

is mechanically isolated from the mounting base, resulting in

a low base strain sensitivity. The stainless steel materials are

non-magnetic resulting in very low magnetic field susceptibility.

These features, together with a sealed body, assure accurate

and reliable data.

FEATURES• Small size

• Charge output (pC/G)

• 30 kHz mounted frequency

• General purpose

• Suitable for high temperatures

• Side entry microdot connector

• No internal electronics



Model MAQ13




Sensitivity 20 pC/G std.



Frequency range Dependent on charge amplifier






Sealing IP67/NEMA 4



Input Self generating

Output Charge

Charge amplitude required CA2

Mating connector Microdot

Capacitance 450 pF







SENSITIVITY CODES


YC 10 pC/G

YD 20 pC/G

YE 30 pC/G


Sensitivity 10 pC/G, 20 pC/G, 30 pC/G

MOUNTING DIMENSIONS

WIRING CODES

WireCenter (+) Output

Shield Case ground


Sensing and Control


Honeywell



+1-815-235-6847



Model MAQ13 Accelerometer












DESCRIPTIONThe Model MAQ14 charge output miniature accelerometer is


ments; including laboratory testing, modal studies and test cells

where high temperatures are likely to be encountered and where

space is limited and small size is desired or a high natural fre-

quency is required. The MAQ14 is a self generating piezoelec-

tric transducer which has no internal electronics and requires no

external power for operation. These units are usually connected

to a local charge amplifier that is mounted as near as possible

in a lower temeperature environment. The seismic element is

mechanically isolated from the mounting base, resulting in a low

base strain sensitivity. The stainless steel materials are

non-magnetic resulting in very low magnetic field susceptibility.

These features, together with a sealed body, assure accurate

and reliable data.

FEATURES• Small size



• General purpose

• Side entry microdot connector



Model MAQ14



Dynamic range 1000 G

Sensitivity 50 pC/G









Sealing IP67/NEMA 4




Standard cable length (AG910)

4,9 m [16 ft] (only AG910)


Mating connector (AG909) Microdot (only AG909)

Capacitance 450 pF







SENSITIVITY CODES


YC 10 pC/G

YE 30 pC/G

YF 50 pC/G


Sensitivity 10 pC/G, 30 pC/G, 50 pC/G

MOUNTING DIMENSIONS

WIRING CODES


Shield Case ground



Sensing and Control


Honeywell



+1-815-235-6847














DESCRIPTIONThe Model MAQ36 charge output miniature accelerometer is de-

signed to be used in Industrial test and automation environments

including laboratory testing, modal studies and test cells where

high temperatures are likely to be encountered and where space

is limited and small size is desired or a high natural frequency is

required. The MAQ36 is a self generating piezoelectric trans-

ducer which has no internal electronics and requires no external

power for operation. These units are usually connected to a local

charge amplifier that is mounted as near as possible in a lower

temperature environment. The Model MAQ36 features a wide

frequency range, and a flat sensitivity vs. temperature response

over the temperature range. The seismic element is mechani-

cally isolated from the mounting base, resulting in a low base

strain sensitivity. The stainless steel materials are non-magnetic

resulting in very low magnetic field susceptibility. These features,

together with a sealed body, assure accurate and reliable data.

FEATURES• Sub-miniature



• Low sensitivity

• Side entry with microdot connector



Model MAQ36




Sensitivity 5 pC/G ±10 %









Sealing IP67/NEMA 4




Output Charge


Mating connector Microdot

Capacitance 300 pF







SENSITIVITY CODES


YA 0.5 pC/G

YB 5 pC/G

YF 50 pC/G


Sensitivity 0.5 pC/G, 5 pC/G , 50 pC/G

MOUNTING DIMENSIONS

WIRING CODES


Shield Case ground


Sensing and Control


Honeywell



+1-815-235-6847













Standard, as shownGlued mounting



DESCRIPTIONThe Model MAQ41 charge output accelerometer is designed to

be used in Industrial test and automation environments; includ-

ing laboratory testing, modal studies and test cells where high

temperatures are likely to be encountered. The MAQ41 is a

self generating piezoelectric transducer which has no internal

electronics. These units are usually connected to a local charge

amplifier that is mounted as near as possible in a lower temeper-

ature environment. The seismic element is mechanically isolated



low magnetic field susceptibility. These features, together with a

sealed body, assure accurate and reliable data.

FEATURES• Enhanced output

• Enhanced sensitivity charge output (pC/G)


• TNC connector often ideal for underground leak detection



Model MAQ41




Sensitivity 1100 pC/G ±10 %



Frequency range Dependent on charge amplifier






Sealing IP67/NEMA 4





Mating connector TNC

Capacitance 4000 pF

Isolation Non-isolated






MOUNTING DIMENSIONS

WIRING CODES


Shield Case ground



Sensing and Control


Honeywell



+1-815-235-6847













AccelerometerModel MAT53

DESCRIPTIONThe Model MAT53 amplified piezoelectric accelerometers com-

bined with integrated temperature sensors are designed to be

used in Industrial test and automation environments; including

laboratory test, modal studies and testing cells where simul-

taneous temperature and velocity vibration are required to be

measured. The constant current low output impedance for the

velocity vibration combined with the current output for the tem-

perature output provide the ability to drive high load capacitance


The seismic element is mechanically isolated from the mounting

base, resulting in a low base strain sensitivity. The stainless steel


susceptibility. These features, together with a sealed body, as-

sure accurate and reliable data. The Model MAT53 is available in

a number of configurations and options that includes connector

or integral stainless steel armored cable (specify length at time

of ordering), The Model MAT53 can be supplied in a number of

different dynamic ranges to suit the expected temperature and

vibration levels.

FEATURES• Temperature and vibration dual output


• IEPE output

• Low base strain sensitivity

• Current O/P for temperature


• Stainless steel armored cable or three-pin connector electri-

cal options



Model MAT53





Temperature range -18 °C to 93 °C [0 °F to 200 °F]


Temperature sensitivity 10 mV/°F







Sealing IP67/NEMA 4





Bias voltage 12 Vdc


Standard cable length1 4,9 m [16 ft]









AG931White (+) Supply (+) Output

Black (+) Temperature

Shield Supply return


Sensitivity 10 mV/G, 30 mV/G, 100 mV/G , 1000 mV/G


3-pin 62 GB connector2

Cable1 (specify cable length at time or order)

Mountingarrangement

17b. 1/4-28 UNF17c. Quickfit female

WIRING CODES

AG930Pin A (+) Supply (+) Output

Pin B Supply return

Pin C (+) Temperature

SENSITIVITY CODES


GU 10 mV/G

GB 30 mV/G

GH 100 mV/G

GG 1000 mV/G


Sensing and Control


Honeywell



+1-815-235-6847



Model MAT53 Accelerometer

MOUNTING DIMENSIONS









NOTES1. Not applicable for AG930.2. Not applicable for AG931.


AccelerometerModel MAV51

DESCRIPTIONThe Model MAV51 amplified piezoelectric accelerometers with

velocity output are designed to be used in Industrial test and

automation environments; including laboratory testing, modal

studies and test cells. The MAV51 is ideal for applications where

velocity content of vibration is a more meaningful parameter to

measure and where noise issues or system simplicity makes

integration of the acceleration signal in the sensor rather than

the signal conditioning more attractive. The constant current low

output impedance output combined with the ability to drive high

load capacitance allows long runs of low cost cable without deg-

radation of data. The seismic element is mechanically isolated



low magnetic field susceptibility. These features, together with

a sealed body, assure accurate and reliable data. The Model

MAV51 is available in a number of configurations and options

that includes connector or integral stainless steel armored cable

(specify length at time of ordering). The Model MAV51 can be

supplied in a number of different sensitivites to suit the expected

vibration levels for the application.

FEATURES• Velocity measurement

• 5 Hz to 4 kHz ±5 % usable frequency range

• IEPE output

• mV/mm/s output

• Integral stainless steel overbraided PTFE cable

• Isolated ac output suitable for harsh environments



Model MAV51



Sensitivity 4 mV/mm/s





Mounted base resonance 18 kHz nominal




Sealing IP67/NEMA 4





Bias voltage 12 Vdc











MOUNTING DIMENSIONS

AG927White (+) Supply (+) Output

Black Supply return




Mountingarrangement


Optionalsensitivity

SA. 12,7 mV/mm/secSB. 25,4 mV/mm/secSC. 50,8 mV/mm/secSD. 101,6 mV/mm/sec


2-pin MS1

Cable2 (specify cable length at time of order)

WIRING CODES

AG926Pin A (+) Supply (+) Output

Pin B Supply return


Sensing and Control


Honeywell



+1-815-235-6847



Model MAV51 Accelerometer









NOTES1. Not applicable for AG926.2. Not applicable for AG927.


AccelerometerModel MAV52

DESCRIPTIONThe SENSOTEC Model MAV52 amplified piezoelectric ac-

celerometers with velocity output are designed to be used in

Industrial test and automation environments; including labora-

tory testing, modal studies and test cells. The MAV52 is ideal

for applications where velocity content of vibration is a more

meaningful parameter to measure and where noise issues or

system simplicity makes integration of the acceleration signal

in the sensor rather than the signal conditioningmore attractive.

The 4 mA to 20 mA output makes it ideal in applications where

noise, cable losses and long cable runs are likely to be an issue.

The seismic element is mechanically isolated from the mounting

base, resulting in a low base strain sensitivity. The stainless steel


susceptibility. These features, together with asealed body, as-

sure accurate and reliable data. The model MAV52 is available in

a number of configurations and options that includes connector

or integral stainless steel armored cable (specify length at time

of ordering), intrinsically safe option or a submersible format.

The mounting hole can be supplied with different threads. The

Model MAV52 can be supplied in a number of different sensitiv-

ites to suit the expected vibration levels for the application.

FEATURES• Velocity measurement


• 4 mA to 20 mA proportional to velocity

• Submersible option



Model MAV52



Dynamic range 50 G

Sensitivity 25,4 mm/s for 4 mA to 20 mA









Sealing, AG928 and AG932 IP67/NEMA 4

Sealing, AG929 IP68/NEMA 4x



Input Voltage

Output 4 mA to 20 mA

Supply voltage 12 V to 32 V


Bias voltage 12 Vdc

Cable2 , AG932 Stainless steel armored PTFE

Cable2 , AG929 PU










AG929Red (+) Supply

Blue (+) Output

Shield Case ground


Sensitivity 12,7 mm/s RMS; 25,4 mm/s RMS ; 50,8 mm/s RMS; 101,6 mm/s RMS


3-pin 62 GB connector1

Cable length2 (specify cable length at time of order)

Mountingarrangement


WIRING CODES

AG928Pin A (+) ve Accel.

Pin B No connection

Pin C 0 V

RANGE CODES

Range Code Range

SA 12,7 mm/s RMS

SB 25,4 mm/s RMS

SC 50,8 mm/s RMS

SD 101,6 mm/s RMS

AG932White (+) Supply

Black (+) Output

Shield Case ground

MOUNTING DIMENSIONS


Sensing and Control


Honeywell



+1-815-235-6847



Model MAV52 Accelerometer










NOTES1. Only available with AG928.2. Only available with AG929 and AG932.


Vibration Meter KitModels VM110 and VM120

DESCRIPTIONThe Model VM110 Vibration Meter is a battery powered, portable

instrument designed to accept any MA Series accelerometer, to

enable vibration measurements to be taken. The meter is capa-

ble of providing RMS and peak measurements of acceleration,

velocity and displacement. A switch for filtering high frequencies

is provided. dc and ac output via a D-type socket is available for

logging or for further signal analysis.

FEATURES• Hand held

• LCD display

• Battery powered

• Velocity and displacement output

• ac or dc output

• Designed to work with constant current accelerometers

• Low pass filter reduces wide-band noises



Models VM110 and VM120



Acceleration 2 G, 20 G, 200 G

Velocity range 2 in/s, 20 in/s, 200 in/s

Displacement 2 thou, 20 thou, 200 thou

Upper frequency Selectable low pass filters of 5 kHz, 10 kHz and 20 kHz

Lower frequency Fixed, acceleration: 5 Hz,

velocity: 10 Hz, displacement: 15 Hz

Detector RMS or peak switch selectable

Display 0.5 in, 3.5 digit LCD (3 readings/s)



Accuracy acceleration 1.5 % RMS, 3 % peak

Velocity 2.5 % RMS, 4 % peak

Displacement 3.5 % RMS, 5 % peak

Noise acceleration 2 mG RMS; 6 mG peak

Velocity 0.01 in/s RMS; 0.03 in/s peak

Displacement 0.02 in RMS; 0.06 in peak

Input 10 mV/G from hand held accelerometer or other MA Series via cal hood

Output ac 200 mV, full range as selected;

dc 200 mV, full range as selected

Power Two PP3 9 V battery, low battery indica-tor on display. Battery life 15 hours approximately

Kit contents One vibration meter; one hand held probe; one magnet; one 4 in spike; one carrying case


ACCESSORIES

Part No.AG902 Model MA11, 100 mV/G accelerometer, 5 m

integral PTFE cable

AG901 Model MA11, 100 mV/G, two-pin MS connector

CA42 Coiled cable assembly two- pin MS to IA110 for use with AG901

CA43 Coiled cable assembly TNC to IA110 for use with MTN/1020

2100 Hand held probe

CA61 IA110 adapter for use with AG902

MM1 Magnet, 1/4 in UNF mounting, 35 mm, strength 20 kg

PS1 Hand held spike, 25 mm, 1/4 in UNF mounting




HE1 Carrying case with foam cut outs


Sensing and Control


Honeywell



+1-815-235-6847



Models VM110 and VM120 Vibration Meter Kit










honeywell test & measurement - accelerometers

Documents